MS SQL Server :: Intermittently My SSIS Packages Which Are Run Through The JOB Are Failing

SSIS Packages Failing To Run. In SQL Agent

Apr 28, 2008

They wre runnning fine until 4/21/2008 then all SSIS packages started to fail.

Simple SQL jobs are still running fine thouhgt and reporting success.

Unable to start execution of step 1 (reason: The SSIS subsystem failed to load [see the SQLAGENT.OUT file for details]; The job has been suspended). The step failed.

View 1 Replies View Related

All SSIS Packages Failing After Windows Update!

Jul 23, 2007

Starting saturday all of our SSIS packages on a server (64-bit) starting failing (hundreds of them) the error is:

Precompiled script failed to load. Attempting to reload the script with updated data. For more information, see the Microsoft Knowledge Base article, KB931846 (http://go.microsoft.com/fwlink/?LinkId=81885).

That Knowledgebase link talks about SP2 fixing the issue but we have SP2 already on the server. The sysdtslog90 table is just packed with these as each script inside each package is getting the same error. Looking at the system log the following were installed as part of windows update shortly before the errors started occuring:

- Update for Windows Server 2003 x64 Edition (KB936357)

- Security Update for Windows Server 2003 x64 Edition (KB926122)

- Microsoft .NET Framework 3.0: x64 (KB928416)

- Security Update for Microsoft .NET Framework, Version 2.0 (KB928365)

- Security Update for Excel 2003 (KB936507)

- Update for Outlook 2003 Junk Email Filter (KB936557)

View 10 Replies View Related

SQL Server 2014 :: Truncate Table Failing (intermittently) - No Errors Presenting

Apr 1, 2015

I have a basic load proc (loading a staging area.) that truncates a target table just before inserting fresh data in said table, all wrapped in a distributed transaction. What happens (only with certain tables and very inconsistently.) is the truncate will fail (no error) and duplicate data ends up in the target table since no wipe actually occurs. This proc only started having this issue when we went from SQL 2008 to SQL 2014.

View 9 Replies View Related

Packages Intermittently Fail Validation

Nov 8, 2007

Hello all,

I'm running into a curious situation here and I was wondering if anyone had some ideas on directions to investigate.

To set up our situation, we are running SQL Server 2005 Standard edition on Windows 2003 Enterprise Edition for 64bit processor. In Dev, winver says V5.2 R2 and we're at SP1. I am told, but cannot verify that the rest of our environments (test, load, stage, prod) are patched to the same level. I do know they are all 64 bit processors and running the 64bit OS. The database servers are all at
Product version 9.00.3027.00
Product level SP2
edition Standard Edition (64-bit)

Our SSIS packages are deployed and stored in SQL server using dtsinstall. I do not know if the DBAs check the "Validate packages after installation." but I will assume they do not. Packages are invoked using dtexec in a manner like "D:Program FilesMicrosoft SQL Server (x86)90DTSBinndtexec.exe" /sq MyPackage /ser MyServer

All of this has been working fine but we've now had two issues where our packages fail to validate. The first was a deployment to production. The same build had been applied to identical environments and processed fine there. However, one package of the 12 deployed to production failed to validate as the built-in Audit dataflow component decided the length for the audit name is not valid for the specified lineage item. We attributed that to a fluke run as we could not reproduce the issue.

Yesterday a different package ran in our test environment. It failed out due to data issues but the important thing is the package actually passed validation and failed at run-time due to bad data. The testers corrected the data issues and this morning when the package (no code changes made to it) was reran it failed to validate with

'The metadata for "[dbo].[MY_TABLE]" cannot be retrieved. Make sure the object name is correct and the object exists.'

* The person invoking the package is a DBA so permissions shouldn't be an issue.
* The code has not changed between yesterday and today.

* The package's configurations in SQL Server have not changed
* The table does exist

To summarize, it validated yesterday and today it fails to validate with no changes to the code. I've asked the DBAs to reprocess the job and see whether the package blows up but in the meanwhile, any thoughts on things to look into? I'm less familar with using SQL Server as the package repository as my last place we used the file system exclusively so that and the possibility of 64bit quirkiness are my current guesses but they are just guesses.

Thank you in advance for your thoughts.

View 3 Replies View Related

Why Are My Scheduled DTS Packages Failing???

Jun 20, 2007

I have a section of about 6 DTS packages that started failing recently. They all write to a network share using a UNC path. The failure coincides with a change to the account SQL Server and SQL Agent run under. I know security context is very important and I have verified the new service account they run under is a Domain account that can execute the DTS packages and has full permissions to the network share.

But when the Agent Job tries to run it fails everytime. Two of us have been looking at this and can't find the issue.

NOTE: I also made the service accout a Server Administrator (fixed server role) to make sure it wasn't a SQL permissions issue.

Anybody have any suggestions about where to look?

View 3 Replies View Related

Calling SSIS Packages From ASP.NET - Packages With File System Tasks End Abruptly

Jan 9, 2007

I've run into a problem with SSIS packages wherein tasks that write or copy files, or create or delete directories, quit execution without any hint of an error nor a failure message, when called from an ASP.NET 2.0 application running on any other machine than the one where the package was created from. By all indications it appeared to be an identity/permissions problem.

Our application involves a separate web server and database server. Both have SQL Server 2005 installed, but the application server originally only had Integration services. The packages are file system-deployed on the application server, and are called using Microsoft.SqlServer.Dts.Runtime methods. For all packages that involve file system tasks, the above problem occurs.

When the above packages are run using the command prompt (either DTEXEC or DTEXECUI) the packages execute just fine. This is expected since we are using an administrative account. However when a ShellExecute of the same command is called from ASP.NET, the same problem occurs.

I've tried giving administrative permissions to the ASPNET worker process user to no avail.

I have likewise attempted to use the SQL Server Agent job approach but that approach might not be acceptable for our clients since it means installing SQL Server 2005 Database services on the application server.

I have read the relevant threads in this forum, namely http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1044739&SiteID=1 and http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=927084&SiteID=1 but failed to find any solution appropriate for our set up.

Anybody got any idea on how to go about this?

View 33 Replies View Related

Integration Services :: Remotely Execute Packages On SSIS Server - Packages Are Deployed In File System

Apr 22, 2015

We manage some SSIS servers, which has only SSIS and SSIS tools installed on them and not the sql server DB.

SSIS packages and configuration files are deployed on a NAS. We run the SSIS packages through DTEXEC by logging in to the server.

We want to allow developers to run their packages on their own on the server, but at the same time we dont want to give them physical access on the server i.e we do not want to add them into RDP users list on server properties. We want them to allow running their packages remotely on the server.

One way We could think of is by using powershell remoting and we are working on that. But is there any other way or any tool already present for the same.

View 4 Replies View Related

SSIS Package Failing - SQL JOB

Jan 24, 2007

Hi:

I have scheduled a SQL JOB (SSIS Package), eventhough the validation comes back as success, the job actually fails. I have configured the job to write to Windows Application Log, but How do i configure the Step(SSIS Package) to write errors to windows application log. I would like to find out why its failing, and I cant seem to find it? I am guessing I would have to setup Logging - Windows Event Log, but how do I configure it, any advice would be helpful. thanks.

View 5 Replies View Related

Job Running SSIS Package Keeps Failing But The SSIS Package By Itself Runs Perfectly Fine

Aug 30, 2006

Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.

Thank you

Tej

View 7 Replies View Related

Scheduled SSIS Failing All The Time - Help!

Jun 11, 2008

Hi all. We recently migrated to SQL Server '05 from 2000 and I'm trying to learn SSIS by crash course.

I just wrote an SSIS for one of our nightly processes in Studio 2005. It built with no errors, and the solution and resulting package are saved on the server housing SQL Server.

I ran the package in debug and it completed 100% with no errors. However, when I scheduled the package in SQL Server, it starts and fails.

Now, I'm very new to SQL '05 and I'm trying to figure out how to log the SSIS jobs, but is there any way to find out why the scheduled packages fail?

I'm desperately needing help on this, and any help would be greatly appreciated!

View 3 Replies View Related

Failing A SSIS Script Component

Mar 7, 2006

Hi

When there is an error in one of the rows a script component (in a child package) is processing I want to fail the child package and the parent package and not continue processing any rows.

How do I do this?

I have every thing in the script component in a try catch statment. This is the catch block

Catch ex As Exception

ErrorMsg = ex.Message + " " + RecordMsg + " Error on Column : " + ColumnMsg

ComponentMetaData.FireError(0, ex.Source, ErrorMsg, String.Empty, 0, False)

End Try

Also I have the FailPackageOnFailure and FailParentOnFailure properties set to true and the max errors value set to 0.

Any suggestions?

Thanks

View 3 Replies View Related

SSIS Package Failing Via Scheduled

Apr 8, 2008

I have 3 SSIS packages I had in a project and exported and scheduled via an SQL Agent job. 2 are working great and one is failing. I have noticed on this one its also having issues in BIDS. It runs sucessfully once then next day when I go in it fails. If I just go into the Data flow and open up the SQL Destimation and then hit ok and try re-running it works. It is like there is something that it doesn't remember.

Same thing happens in SQL Agent if before I promote I go into SQl destination editor hit ok save then

create my build run it via agent job it works 1st time but fails on the following time. I don't see anything different between this SSIS and the others but there must be something.

All of these are simple copy data from as/400 to SQL server with some data conversions.

Here is the error msg I am receiving.

Message
Executed as user: PERFORMANCEstacyadmin. ....3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 5:55:11 AM Error: 2008-04-08 05:56:00.88 Code: 0xC0202009 Source: Load WeeklySalesHistory Current Week WeeklySalesHistory [184] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from DTS buffer timed out.". End Error Error: 2... The package execution fa... The step failed.

What am I missing.

Stacy

View 3 Replies View Related

SQL Agent Failing When Trying To Run My SSIS Package

Feb 6, 2006

I found a similar thread posted under the same title as this by dba123. Unfortunately, his solution does not match my problem.

I have a SSIS package that will run fine in debug mode, will run fine when published to the server when I right click and execute it. However, when I run it through a job, either scheduled or running the job manually, the job fails. There is an entry in the servers application log telling me that "login failed for user xxxxx" where xxxxx is the name of SQL login that I am using. I know that the login works (logged in manually to the server via management studio, and it runs fine when I run it manually). Both connection managers are SQL, no flat files or other data source types. All the commands are T-SQL. The SQL Agent has full database access to both servers that the connection manager connects to - and its NOT the profile that is reporting as failing - it is a domain account.

This is totally bizzare - ANY help would be appreciated.

View 7 Replies View Related

SSIS Sceduled Tasks Failing.

Feb 15, 2008

Hi
I have a strange problem with SSIS packages.
(brief description - packages select some data from DBs , write them to CSV file and then CSV file is
copied and renamed to a folder made up of the date)
I have 5 packages scheduled to run, these jobs run perfectly when test scheduled during the day,
(so its not a user permissions problem).
However it seems the 1st package to run at night will fail.
The reason I say 1st is the following,
I had Package A scheduled at 11:20PM and package B at 11:30PM , Package B always succeeded
but package A always failed.
I would test A during the day and it would run fine (the jobs would run successfully aswell as just executing the package manually) .

The I changed the time with B to 11:50PM and it succeeds and A fails ! without changing the packages themselves.

This counts out a possibilty of a DB backup causing the problem (pack always succeeded at 1130, now fails at the same
time)

I was thinking maybe as the folder wasn't created when the 1st pack ran this was causing the fail, but when i test run the job
this morning it succeeds .. and todays folder doesn't exist either !

any ideas ?

View 5 Replies View Related

SSIS Package Job Failing Due To Log Shipping.

Sep 11, 2007

I am having an issue with a job that runs a SSIS package that moves data from a transactional system to a data warehouse database.. The problem is that I have Log Shipping running to this database every 30 minutes which disconnects the users from the database so the transaction log can be restored. This is causing the job to fail. Is there a way in the job that runs to have it wait for the database to come on line or not fail because there is no connection? This job is a master job that runs multiple SSIS packages.

Thanks for any help.

Leo

Date 9/11/2007 2:00:01 PM
Log Job History (Reports Master)
Step ID 1
Server TWSQLRPTS
Job Name Reports Master
Step Name Step1
Duration 00:00:01
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: TWDOMAINSQLADMIN. ... 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 2:00:01 PM Error: 2007-09-11 14:00:02.34 Code: 0xC0202009 Source: BidBacklog Connection manager "TWSQLRPTS.HomeBASE" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login failed for user 'TWDOMAINSQLADMIN'.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot open database "HomeBASE" requested by the login. The login failed.". End Error Error: 2007-09-11 14:00:02.34 Code: 0xC020801C Source: DTSTask_DTSDataPumpTask_1 OLE DB Source [1] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager ... The package execution fa... The step failed.

View 6 Replies View Related

SQL Agent Failing When Trying To Run My SSIS Package

Feb 21, 2006

Hi,
I have a problem with an Access db
connection in my package when run by SQL Agent. I have problem running a job with my package so i used the
log and found out that when i change the connection property of the
access connection manager in my package to a local Access file on my
machine, it works just fine but if i change the connection to that of
an Access db on my Y drive (which has been set up on my machine), it
doesnt execute. I checked the security property of the network folder
in which the access db exist and I do have rights. That is to
say, i dont know why it cannot access it then. The funny part is that
when i run the packae in SSIS (VS.NET) or Intergration services in
Managment studio, it runs just fine but when i execute the job through
Sql Server Agent, it generates the following error:

OnError,CYPRESS0927,CYPRESSebuah,CLMH
from ocan
access,{b1f7035e-919c-434b-8a1d-d0f6267a13aa},{6ED748E8-16C0-4E9A-9DBD-882641657572},2/20/2006
6:15:15 PM,2/20/2006 6:15:15 PM,-1071611876,0x,The AcquireConnection
method call to the connection manager "ocan_conn" failed with error
code 0xC0202009.

ocan_conn is the name of my connection object to the access db in my package.

Is there anything Im missing.

View 3 Replies View Related

SQL Agent Failing When Trying To Run My SSIS Package

Jan 4, 2006

My SQL Agent was working fine. Now when I try to run it, it failes when trying to run my SSIS package. I looked in the logs, and job history, no luck in finding any critical errors.

My SSIS package runs fine through VS 2005 in debug mode.

Here are the only errors:

01/04/2006 09:53:48,,Warning,[396] An idle CPU condition has not been defined - OnIdle job schedules will have no effect
01/04/2006 09:53:48,,Warning,[260] Unable to start mail session (reason: No mail profile defined)
01/04/2006 09:53:48,,Information,[129] SQLSERVERAGENT starting under Windows NT service control
01/04/2006 09:53:48,,Error,[364] The Messenger service has not been started - NetSend notifications will not be sent
01/04/2006 09:53:30,,Information,[432] There are 11 subsystems in the subsystems cache
01/04/2006 09:53:29,,Information,[339] Local computer is BG-SQL2005 running Windows NT 5.2 (3790) Service Pack 1
01/04/2006 09:53:29,,Information,[310] 1 processor(s) and 512 MB RAM detected
01/04/2006 09:53:29,,Information,[103] NetLib being used by driver is DBNETLIB.DLL; Local host server is
01/04/2006 09:53:29,,Information,[102] SQL Server ODBC driver version 9.00.1399
01/04/2006 09:53:29,,Information,[101] SQL Server BG-SQL2005 version 9.00.1399 (0 connection limit)
01/04/2006 09:53:29,,Information,[100] Microsoft SQLServerAgent version 9.00.1399.06 (x86 unicode retail build) : Process ID 1860

View 37 Replies View Related

SSIS Package Failing To Disconnect?

Jan 16, 2006

I am building a package that will be used to transfer data from Access 2000 to SQL 2005. For development purposes, the first thing I do is search for my SQL database. If it is there, I drop and recreate it. If I run the package once, it runs fine, . After that, I get the message that the database is in use and can not be deleted. I do not have Mgmt Studio open, so the only thing that could have a connection is the BI Studio. The only way I can seem to clear it, is to close and reopen BI Studio and the package. To make matters worse, it does not happen all the time. So sometimes I can run the package as many times as I would like, until it chokes, and then I get to start all over again. Has anyone else seen something like this, or am I missing something in the package and/or task settings? Please let me know.

Thanks,

DO

View 7 Replies View Related

SQL Job Setup To Run SSIS 2005 Package Is Failing

Mar 9, 2006

I keep getting a failure when trying to run my agent which is trunning an SSIS 2005 package. I have checked the logins and appear to have given the right logins owner to the msdb database and my other databases but still getting this error:

03/09/2006 10:13:31,Run EBN Process,Error,0,BG-22SQL,Run EBN Process,(Job outcome),,The job failed. The Job was invoked by User domainmyuserid. The last step to run was step 1 (Run EBN SSIS Package).,00:00:02,0,0,,,,0
03/09/2006 10:13:31,Run EBN Process,Error,1,BG-22SQL,Run EBN Process,Run EBN SSIS Package,,Executed as user: domainaccount_we_setup_to_run_all_sql_services_on_this_server. The package execution failed. The step failed.,00:00:02,0,0,,,,0

Is it the package that is failing or permission issue?

View 6 Replies View Related

SQL Agent Failing When Running SSIS Package

Mar 9, 2006

I deployed my SSIS package to SQL Server 2005.

I have done the following:

1) Gave the sql agent account permissions to the msdb database and other databases

2) Checked the paths for "Data Sources" under properties of my agent in the SSIS properties

3) Set the authentification to Windows and used the sql agent account (a domain account that I setup) to run the agent. I also tried my login. So it's not a permission issue, because I do not get permission errors...it's past this.

What works:

1) Other SQL Agent packages...they are not running an SSIS package, just SQL

2) Running the SSiS package by right-clicking on it in Management Sudio. No errors found in the execution and the package does it's intended function

3) Package runs fine with absolutely no errors in VS 2005

What doesn't work:

1) My agent that points to my SSIS package. All this agent does is run that package. When I run the agent, I get a minimal error message in the job history logs stating the following error message:

03/09/2006 12:49:58,Run EN Process,Error,0,BG-22SQL,Run EN Process,(Job outcome),,The job failed. The Job was invoked by User domainmy_account. The last step to run was step 1 (Run EN SSIS Package).,00:00:02,0,0,,,,0

03/09/2006 12:49:58,Run EN Process,Error,1,BG-22SQL,Run EN Process,Run EN SSIS Package,,Executed as user: domainsqlagent_account. The package execution failed. The step failed.,00:00:01,0,0,,,,0

View 4 Replies View Related

SSIS - For Each Loop With Insert In Execute Task Failing

Oct 19, 2015

I have ForEach Loop using Foreach File Enumerator. Within this loop I have SQL Task containing an Insert statement. When I run the Insert statement in query builder the transaction inserts data into a table as expected.

However, when actually running the process I am getting the error message:

Executing the query "INSERT INTO dbo.TEST_TABLE
..." failed with the following error: "Value does not fall within the expected range.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

I currently have the ResultSet to "None" and have defined the parameter I am using. Where the process seems to joke is on my file_Name variable will I am trying to insert only part of the file name.

My insert statement looks as follows:

INSERT INTO dbo.TEST_TABLE
(IID, AN8, File_Type, IB_OB, File_Name, Processed_Flag, ReceiptDateTime)
VALUES
(
'1111',
'123',
'888',
'IB',
RIGHT(LEFT(?, LEN(?) - 4), LEN(?) - 24),
'I',
GETDATE())

View 0 Replies View Related

SSIS Package Failing When Run As A Job But Runs Fine In BI Studio

Sep 12, 2007

I'm at a bit of a loss. I've written a package that has about a dozen data flow tasks and each one loads data from text files into tables in a db. It's possible that some of the fields in the text files may have data that would need to be truncated upon insert into the db.

In the data flows, I've set the fields in the data sources I know this could happen to to ignore truncation errors. When I run this within BI Studio, everything works fine. I then loaded the package into the SSIS store on the db server and if I attempt to run it from the SSIS store or if a job executes it, the package appears to be failing because of these truncation errors that I've told it to ignore.

Am I missing something? Thanks!

View 7 Replies View Related

Aspnet_wp.exe Crashing Intermittently

Mar 2, 2007

I have an application which is providing printing facility using a custom hardware interface device.
Whenever a print is required user punches in his ID number into the hardware device, and hence an underlying application gets the event and it calls a managed DLL, which inturn calls the Reporting services webservice on the same server. Problem starts after some days (typically after 2 -3 days), when the server response becomes slow and the aspnet_wp.exe restarts every now and then and after this sequence of happening, finally it crashes with some event in application in event log which reads:
The server was unable to allocate from the system nonpaged
pool because the pool was empty.

Also many times the applications log file reads :
There is an error in XML document (1, 948).
I think this error starts when the aspnet_wp.exe is restarting, but I am not sure.

The server operating system is Windows 2000 SP-4, MS SQL Server 2000 Standard Edition SP-4, MS Reporting Services 2000 Standard SP-2 with .Net Framework v1.1
The Server is running many applications apart from the ones listed above and there is a moderate usage of TCP/IP sockets for communicating with certain hardware devices.
Please help me out!

View 1 Replies View Related

SQL CLR Debugging Fails Intermittently

Sep 11, 2007

I have only intermittent success with debugging CLR stored procs. Sometimes it works, and sometimes it does not.

When debugging does not start, the output ends at the line:
Auto-attach to process '[516] sqlservr.exe' on machine 'dcnr-ait669sell' succeeded.

The visual studio still shows running, but it never gets to a breakpoint and never shows another line on the output. Processor usage is zero.

To start debugging, I have to restart SQL Server, restart the Visual Studio, and (probably) restart the machine. Essentially, I just mess with things until it starts. I have seen it start after a long while when I just let it sit, but I have let it sit for several hours without starting.

The Visual Studio will not respond to the Debug > Stop Debugging menu item. It eventually shows a ��Stop Now�? box that says that it will disappear when debugging stops, but it never stops.

I am using SQL Server on my local machine for debugging.

When it works, everything is OK.

Any suggestions will be appreciated.

View 8 Replies View Related

Maintenance Jobs Failing SSIS Subsystem Failed To Load

May 1, 2008

Environment: SQL Server 2005 Enterprise Edition x64, 3 server cluster. Two active servers with seperate instances and one passive server. SQL Server was installed on the two active servers.

Problem: When I fail over either of my instances to the passive server in the cluster my maintenance jobs fail to run and there are error messages in the application event viewer "SSIS Subsystem failed to load". I am guessing that all of the needed components are not installed on the passive server? Is this a close guess? If so, exactly what components are missing and do you have to have another license to install them?

Thanks in advance for any advice.

View 2 Replies View Related

Integration Services :: SSIS Connection Object Update Failing

Jun 29, 2015

I built a small package two years ago that uses Flat File Sources to copy in small text data files. Each source connection object has a UNC path to flat text files on another server. The source system changed, so I opened the package and updated the UNC path in one Connection Manager object, and clicked OK. The Flat File Source Editor that uses this source seemed to be able to see the new location when I clicked "Preview". Then I went back to the file source, and the connection had reverted back to the original one. it would not save the new UNC path.

I am using SQL Server 2012 SP2 with SSDT (run as admin). I closed the package in SSDT, edited the connection strings using XMLnotepad, and was then able to open, test, build and deploy the package.

It seems that the Source object will not let itself be changed. The other option is to delete it and recreate it, but I didn't want to remap the fields.

Why updating a connection object is not working?

View 5 Replies View Related

SSIS Package Failing During Bulk Load - Without Useful Error Code

May 4, 2007

I have a dataflow step (flat file -> Sql Server Destination), with a batch size of 2500 records. It fails consistently around 3.6 million records in, with only this error -

[SQL Server Destination [4076]] Error: Unable to prepare the SSIS bulk insert for data insertion.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SQL Server Destination" (4076) failed with error code 0xC0202071. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0202071. There may be error messages posted before this with more information on why the thread has exited.
[Flat File Source [1]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.

[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.

How can I debug this further to see what's going wrong?

View 1 Replies View Related

Integration Services :: SSIS - PIOLEDB Failing When Using Query Parameters?

Nov 9, 2015

I am querying OSI PI data using PI OLEDB source transformation in SSIS. When i write a simple query, data is coming. My requirement is to pass parameter to pull data from PI. When i do it the usual way of passing parameters, i get the following error:

"OLE DB Source failed the pre-execute phase and returned error code 0xC0202009"

This is my source query.

SELECT tag, time, value FROM PIAVG WHERE SUBSTR(tag,1,9) =? AND time > '20-Oct-15' and TIME <'29-OCT-15' AND TIMESTEP='1H'

where i am assigning a User::variable for the ?

View 2 Replies View Related

Integration Services :: SSIS Script Component Source Failing With Error

Aug 28, 2015

we need download files from FTP location , so we are using script component as source and when we are using the fallowing code// read a file and write out as columns in rows

WebClient myWebClient = new WebClient();
myWebClient.Credentials = new NetworkCredential(Variables.ftpLogin, Variables.ftpPassword);

// Concatenate the domain with the Web resource filename.
string myStringWebResource = Variables.fileURL + Variables.fileName;

string s = myWebClient.DownloadString(myStringWebResource);
StringReader reader = new StringReader(s);

we are getting the fallowing error The server returned an error: (404) Not Found. are we missing anything in the code.

View 2 Replies View Related

SSIS Failing To Load Extended Character In Code Page 1252

Aug 8, 2007

Background��

We��re receiving the data as flat files, when I open up the file in notepad the characters look like the error��d examples (see below). Open the file up in a texteditor where you can apply code page 1252 it display the characters correctly, which is expected behaviour!

I use SSIS to load these files into my database, applying the correct code page��

��however the data gets loaded in the incorrect form. Plus the database is collation ��SQL_Latin1_General_CP1_CI_AS�� which is code page 1252 so I can��t see why I am getting these issues.

This is an example of the Umlaut (German chars) issues were getting, they��re appearing in the database like this��.

tuid travelproductid lastname
1741869 6 P�?hls
1792950 6 Sch��fer
2087798 6 L�?schhorn
2089010 6 Sagemller
2314086 6 Jnger

��& should be��

1741869 6 Pöhls
1792950 6 Schäfer
2087798 6 Löschhorn
2089010 6 Sagemüller
2314086 6 Jünger

I think it��s a bug with SSIS, I know having a Unicode file would certainly solve this but I don't have that option.

View 9 Replies View Related

Stored Procedure Run From ASP.NET Page Gets Very Slow Intermittently

Dec 5, 2006

I have developed a stored procedure that filters a view that is a union of several different tables. This provides status information for items across our warehouse management system. This system seems to work very well and normally processes results very quickly (< 3 seconds). However, occasionally (every few days) we begin to see timeouts on the query after 3 minutes of processing. I can watch this process in SQL Profiler and see that the query is timing out after 180 seconds, which is the timeout we have for the query within the DAL. When I copy the line from the SQL Profiler and execute it directly in SSMS, the query executes in less than 2 seconds. I first thought that somehow this had to do with execution plans, but when I try to reload the page again, which executes the query, it still times out. I did add a OPTION(KEEPFIXED PLAN) to the sproc, and that seemed to speed things up for the time, but I am not sure if this is even the problem and what the optimal solution would be. Any thoughts spring to mind?
Thanks, Steve

View 3 Replies View Related

Intermittently Slow Query - Left Join

Apr 21, 2006

Here's a little background on the query. I have a list of documents by an id number in one table and the description of the sheets in another table. It's a one to many relationship, so for each description, there may be multiple entries in the documents table that it applies to. For example:

Descriptions table:

ID | Title
Doc1 | Document 1
Doc2 | Document 2

Documents table:

ID | Parent
Doc1 | 10400
Doc2 | 10400
Doc1 | 20189
Doc3 | 20189

View:

ID | Parent | Description
Doc1 | 10400 | Document 1
Doc2 | 10400 | Document 2
Doc1 | 20189 | Document 1
Doc3 | 20189 | (null)

So the query I am using uses a left join to combine the data from the one table into the other. There might not be an entry for the description, so for some Document entries, the description field may be blank. For some reason, certain queries take about 2 minutes longer than others who retreive 5 times the information.

In SQL Manager, is says "Executing Query. Waiting for response from data source." After about 20 seconds it says "Retrieving Data..." then about a minute later, it finally comes up with the data. I can select another parent that has a lot more items and it comes up in about 3 seconds max.

It's running on SQL Server 2005 with 2GB of RAM.

Any suggestions on tracking down the reason for the slowness would be great.

Thanks in advance!!!

-Dan

View 8 Replies View Related