Hi
guys.
Is it possible to interoperate between SQL mobile and applications developed in j2me?
I need my application in j2me to perorm the basic database operations in sql mobile db.
Please advise
Thanks
Hello,
I am developping a non-managed C++ application for PocketPC using a SQL Server mobile database.
The application is compiled for PocketPC 2003 and uses SQL Server Mobile v2. I use Visual Studio 2005. But I need to compile the application for Windows Mobile 5.0 devices. So I installed the WM5 SDK and had the WM5 into my project configuration.
The "ssceoledb.h" which I include incluses the "transact.h" file. But my problem is that this file is only provided with the PocketPC 2003 SDK and not in the WM5 SDK.
So I cannot use the WM5 configuration project with SQL Server. I also tried with the last SQL Server Mobile 2005 (ie v3.0) and the "ssceoledb30.h" also includes "transact.h".
Did I miss something to install ?
Do you know how I can resolve the problem ?
By advance, thank you for any answer.
--
Gregoire
This is a great tutorial and it's a shame one of the more important steps was missed.
In the €œCreate the snapshot user€? section you you find the steps to create the snapshot_agent account. Then in the €œCreate the snapshot folder€? section you find the share and folder permissions. However, at no point do the instructions advise you about adding the snapshot_agent to the SQL Server Logins. The result is that agent cannot perform the initial snapshot but you won't find this out until 50 steps later after Step 10 in the section €œCreate a new subscription".
To get back on track, openthe Object Explorer's Security section and add the snapshot_agent to your logins. Then using the "User Mappings", set an appropriate level for the SQLMobile database role. Once completed you then need to run the agent.
Right-click the SQLMobile publication you created and select "View Snapshot Agent status". From that dialog you can select "Start" to run the agent. When it completes, you can return to the tutorial section "Create a new subscription" and continue with the tutorial.
I am studying the tutorial in SQL Server 2005 Mobile Edition Books Online, and the topic is Creating a Mobile Application with SQL Server Mobile. I have got a problem when creating a new subscription after created a new SQL Server Mobile database. And the problem is shown below:
New Subscription Wizard
- Beginning Synchronization (Success)
- Synchronizing Data (100%) (Error)
Messages
* Failure to connect to SQL Server with provided connection information. SQL Server does not exist, access is denied because the IIS user is not a valid user on the SQL Server, or the password is incorrect.
HRESULT 0x80004005 (29061)
* 無法完æˆ?作æ¥ã€‚
- Finalizing Synchronization (Stopped)
- Saving Subscription Properties (Stopped)
Before I have met this problem, I have finished all the task. And I can browse the localhost web site by using anonymous account even I use internet explorer or browse the directly in IIS.
Does anyone can solve it?? Thank you very much~~~
I am geeting following error while trying to acquire db connection. I use sql server ce2.0 with vs2005
Failed to find or load the registered .Net Framework Data Provider
Hi
My application :
On PC : Access application + Access DB
On PocketPC : Embedded Visual Basic 3.0 application + PocketAccess DB
I synchronise my DBs through ActivSync.
It runs good before Windows Mobile 5.
My customers asked me for new PocketPC with this application, so I bought some new PocketPCs : but as I see, syncronisation with Access is no more supported.
So what are my solutions ?
My customer wait for there PocketPC, so I need a quick solution, I don't want to rewrite all my application now.
My application run before WM5, so now I don't want to have to pay for a Visual Studio .Net, some SQL Server, etc ....
Please, what are the solutions that won't cost me more than the time that have already lost with this new Windows Mobile 5 ?
Joël
Hi,
I've found guides on creating a mobile application but everything is on 1 computer.
What i'd like to do is to seperate into 3 parts for added security.
One is used to store the Database.
One is used as an IIS Server (Web Server).
One is used as a Deployment Server.
Is there a step-by-step guide to this setup?
I am creating a mobile application in which i am implementing data synchronization through merge replication method as per the step by step procedure given in the following link:-
http://msdn2.microsoft.com/en-us/library/ms171908.aspx
I am using SQL server Mobile Edition which is included in SQL server 2005 in this application, but the application suggests to use SQL server Compact Edition. I was able to successfully create the publication, but not able to run the sqlcesa30.dll file of the created virtual directory in the internet explorer. Is this problem because of i'm not using SQL server Compact Edition? and also let me know if i use SQL server Mobile Edition, do i need to install its Server Tools? If yes, please give me the link to download the tools needed.
Reply Soon.
Dear All,
I am trying to build a simple mobile application. I am very new to this. Thus I am trying to access the build in database in the folder C:Program FilesMicrosoft SQL Server 2005 Mobile EditionDeviceMobilev3.0Northwind.sdf. I am following the steps in the wizard to help me. When I press test connection is say Test Connection Succeeded. But when I press the ok button I get this error as "Unable to find the requested .Net Framework Data Provider. It may not be installed". I am running VS 2005. Can anyone pls help ?
Hi there, i am building a mobile app using vs 2008, the app has about 8 - 12 forms that collect data.. i am thinking of
i am trying to decide how i want to save the temporary work data while the user fills the data collection forms.
when the user selects to create a new report, i will
create a new xml file...
as user moves from form to form, i will update the file
when the user has finished filling up all the data i will create a transaction and insert the data into the sql ce database and delete the file...
i will be using sql ce 3.5
i think it supports transactions
i think it also supports identity.... i am using sql management studio 2005 standalone , so i cannot visually modify the 3.5 sdf.,..,. is there a tool for 2008 that will let me visually modify the table(s)? i dont want to use the 2008 feb community edition...
is there a better way to do this? should i skip the xml and go directly into sql ce insert (for the first record creation) and updates? i think this will be a performance killer on a win mob devilce (5.0)
p.s. i cannot store data in a class, and then commit the class to the transaction because if the application crashes i will loose class data, so xml file will be needed.,
suggestions?
Hi,
I'm writing a windows application using VB.NET 2005 that must connect to Pocket PC via ActiveSync to read data from SQL Server CE. This is my code:
Dim cnn As New SqlCeConnection
cnn.ConnectionString = "Data Source =Mobile DeviceStorage CardProgram FilesMyAppMobileDB1.sdf"
cnn.Open()
But I get the following error:
The path is not valid. Check the directory for the database. [ Path = Mobile DeviceStorage CardProgram FilesMyAppMobileDB1.sdf ]
Any help would be greatly appreciated!
Leila
I've read that microsoft.applicationblocks.data for .net v2 can't be deployed to a mobile app, and my experience bears that out. So I 'm wondering if there are application blocks for windows mobile 5 that would know how to both talk to sql server mobile and sql server 2005. I see OpenNetCF has a port but as far as I can tell, they only address sql server mobile and not talking to a sql server 2005 remote database. I can use the OpenNetCF version for my sql server mobile requirements, but I'm hoping there is an encapsulation of sqlclient calls for communication with my server db.
thanks
braden
Hi There,
I would like to know what the recommended Number of Sql Mobile Databases Per Application?
I appreciate any response!
Thanks!
Hello!!
I completed that example that I pasted in the subject part and when I try to synchronize my mobile database, the data from the server appear in my pocket pc; but when i refresh the data on my pocket pc they do not show on the server.
Can anyone give me a hand?
thanks
I know that with traditional SQL systems, it is important to only open connections to a sql server when they are needed. However, since there is no "server" in mobile apps, is it bad practice to leave one open throughout the duration of an application?
The application is going to be constantly reading and writing to the data tables and it seems like it might be a good idea to leave it open.
Thanks!
Event ID - 1001 and Event ID - 1004.
Source - MsiInstaller
Error Description for Event ID - 1001:
Detection of product '{8670F53C-8AD7-4F34-BDBA-17B38A18CB65}', feature 'SQL_SSMSEE' failed during request for component '{6EC5DFBD-F6B5-4F02-8432-BFB8B03562B8}'
Error Description for Event ID - 1004:
Detection of product '{8670F53C-8AD7-4F34-BDBA-17B38A18CB65}', feature 'SQL_SSMSEE', component '{180F515D-F56C-40DD-9D71-CC532EA8E286}' failed. The resource '' does not exist.
While opening our SAP Mobile Client Application, in the task manager MSIEXEC.EXE is running and trying to repair the application and this will cause our application to take time to lauch. In the Event viewer, whenever we try to lauch our application we are getting this event id's. Can you please kindly provide a solution for this msg.
Regards,
Thiyagarajan.R
Today I got the latest propaganda email from MSFT talking about XML andinteroperability. It's been bothering me all day and while the notionof interoperability is good -- the ability to interact with disparateheterogeneous platforms and protocols -- what really bugs me is thechoice of words.Interoperability has 8 syllables, only 6 syllables shy of"Supercalifragilisticexpialidocious". Plus Inter implies movementbetween objects. When you fly between countries, it's goinginternational. When we're sending something within the companyfirewall, we're working inside the intranet. However, we're not movingbetween "operabilities".What is operability? To operate; to use. The operator; the user.Operable; usable or state of usefulness. Operability; WTF? If onemoment I was driving in my car and the next, I wreck my car -- then mycar has changed its state of usefulness. So my car experiencedinteroperability?Anyways...
View 1 Replies View Related
Hi all.
In my current infrastructure I have a SQL 2005 32-bit server and want to integrate a SQL 2005 64-bit in to it. So my question is can 32-bit agent communicate with 64-bit agent and vice versa. And are there any known interoperability issues with these two versions? Pls advice.
Thank you.
1) if our .net app (oltp) is changed to ask sql for encryption (rather than thru .net) on server A, can server B where our wh resides, thru a linked server run an sp remotely on A and get A to provide decryption thru the keys defined there?
2)can the encryption keys etc defined on one server be imported to another server and still behave exactly the same way on the 2nd server as they do on the first? ie decrypt data originally encrypted by the first successfully.
I'm attempting to use RDA to synchronize a pocket pc emulator with SQL Server 2005 database by following tutorial http://msdn2.microsoft.com/en-us/library/aa454892.aspx, which uses AdvWorksMobile database that comes with SQL Server 2005.
When get to testing of "To test application features " ( step 4 of the merge replication setup lab ), I am receiving SQLCe Exception errors.
ORIGINALLY, I was able to deploy an application and view the local database on the emulator, but once I clicked "InitSinc" button, I received an error.
"Failure to connect to SQL Server with provided connection information. SQL Server does not" exist, access is denied because the SQL user is not a valid user on the SQL Server, or the password is incorrect.
Found this error listed in Server Agent Errors log http://technet.microsoft.com/en-us/library/ms172357.aspx, but it wasn't very helpful since it doesn't provide any suggestions on fixing the problems.
I am brand new to SQL CE Server , mobile programming and .NET framework in general so please bare with me
All the connections / security settings, etc that were set up were taken from a tutorial so I am not sure what SQLCeServer is complaining about. Reading up on the error on the web didn't help, it all pointed to making sure that the snapshot folder had correct permissions set up. I verified that MACHINENAMEUISR_MACHINENAME guest user had Read rights to the database so I don't think that piece is the problem. Otherwise ,Merge publication has been setup in Microsoft SQL Server Management Studio by following the tutorial.
I am trying to run this sync on my home pc so there should be no issues with any user permissions
I have IIS installed
I did NOT have SQL Server Agent running in management studio at this time
I am trying to run this tutorial on an XP machine, which is my regular home PC so I dont think there are any special networking settings to consider
I am able to hit http://localhost/AdvWorksMobile/sqlcesa30.dll from my pc OK, but when I try to hit it from a cradled emulator ( after replacing "localhost" with "MACHINE_NAME" ), Internet Explorer on the emulator gives me a "Cannot Connect With Current Settings" error message. This part wasn't part of tutorial but decided so not sure if I am supposed to be able to hit it from my emulator..so I am not sure if the fact that I can't hit it is related to the problem.
AFTER STARTING SQL SERVER AGENTin Microsoft SQL Server Management Studio, I killed the application, and after relaunching it, it hits "The Specified table does not exist [Vendor]" error. This time it doesn't even launch first - that is I dont even get to pressing "InitSinc" button. Debugger is showing that this error is hit on the following line in AdvWorksMobile.AddWorksDataSetTableAdapters
int returnValue = this.Adapter.Fill(dataTable);
I am not sure why the errors changed on me after starting SQL Server Agent.
What can I do to fix this connection problem?
Thank you so much for your help!
Irina
Dear ppl,
I am writing an application for a device (MDA Pro T-Mobile) having Windows Mobile 5.0 using
-MS .NET Compact Framework 2.0 SP-1
-SQL Mobile 2005.
-VS 2005 .NET
The application uses Merge Replication. The error occurs in the Synchronise() Method of the SqlCeReplication object.
"SQL Server Mobile encountered problems when opening the database."
repl.AddSubscription(AddOption.CreateDatabase);
repl.Synchronize();
I don't understand why I am having this error. It does create the database on AddSubscription() method but it is failing opening the database on Synchronise(). I have also tried uninstalling and then reinstalling all the SQL Mobile components in the following order.
-sqlce30.wce5.armv4i.cab
-sqlce30.repl.wce5.armv4i.cab
-sqlce30.dev.ENU.wce5.armv4i.cab
However, when i run this application on a device(Dell X50 AXIM) with Pocket PC 2003, it runs fine creating the database and sysnchronising it.
The target platform for the project is Windows Mobile 5.0 Pocket PC SDK.
Does any one have any clue what could be the problem ?
Regards
Nabeel
I am migrating a pocket PC application from VS 2003 to VS 2005 and a few weeks ago I hit the following problem when replicating
A SQL Mobile DLL could not be loaded. Reinstall SQL Mobile. [ DLL Name=sqlceca30.dll]
Scanning forums for help I saw that other people had had this problem and one
http://www.eggheadcafe.com/aspnet_answers/NETFrameworkCompactFramework/Feb2006/post25814466.asp
suggested that this problem could be circumvented by getting the replication object early and then continuously using the same object for subsequent replications.
I did this and it works a lot better now but ever so often I get another error which is
Native Error 28559 SQL Mobile encountered problems when opening the database
My only option at this point is to stop and start the application which cures the problem.
Using MS VS 2005 (incl SQL Server Mobile)
MS Pocket PC 2005 SDK
I am working on a project that builds for Pocket PC on both Mobile 2003 and Mobile 5. The project uses/will use SQL Server Mobile to store local data.
Project created from new with support for both platforms. I include required header files ssceerr30.h and ssceoledb30.h.
Project builds fine in WM2003 configuration, release and debug.
When I build for WM5 the compiler cannot find the header file transact.h. This is included from within ssceoledb30.h. Same as under WM2003.
In WM2003 configuration if I highlight the ssceoledb30.h include in Visual Studio and open the header, it takes me to <Visual Studio dir>SmartDevicesSDKSQL ServerMobilev3.0. I then locate the include for transact.h and do the same, which takes me <Visual Studio dir>SDKPocketPC2003include. The file exists.
If I repeat the above 'browsing' under the WM5 configuration, ssceoledb30.h takes me to a different copy in the WM5 SDK directory. There is no diff between the file here and the other copy used by WM2003. If I attempt to open transact.h - file does not exist.
Fix (which I'm not too sure about, i.e. is it OK?) - If I copy transact.h to the WM5 SDK directory, the project builds.
Why has transact.h disappeared from WM5 SDK?
I can find no ref's to this problem anywhere. Is my installation of the WM5 SDK corrupt? What else could I be missing?
Is there a sample for SQL Server mobile (like the NorthwindOLEDB sample) that comes configured to build for WM5?
It is possible to access a Sql Server 2005 Mobile database in a VS2003 application (compact framework) ?
Thanks
Robson
I receive error 25123 on my PPC (audiovox 6600) in a reproducable way (usually) with .net 2.0 application that is using SQL CE that I wrote:
Open the application
Connect to the database
Close the applicaton
Re-Open the application
Connect to the database <-- Error occurs
I will also receive the error if my application isn't the first application launched (or very close to the first to launch).
I don't believe it's a memory issue as according to the memory manager I have plenty of memory:
At boot up only start screen items loaded: 18.46 Used 49.89 Free
Launch Resco File Explorer to click EXE: 19.18 Used 49.18 Free
Launch my application (no DB connection): 23.64 Used 44.71 Free
Connect to the DB and do select count(*) from a table with 0 rows: 26.27 Used 42.08 Free
Close the application (this.Close() on the form: 19.38 Used 48.97 Free
Relaunch App and connect to DB receive error: around 38 Used around 30 free
I was unable to reproduce the issue right now while typing this message, the last sets of numbers are from memory, and include other applications that are currently running.
The only way I have to get SQL CE to load again is to soft reset the PPC. If the application is able to connect to SQL CE at least once it is fine up till I close it and re-open the application. So it either connects and runs great, or it can't connect at all.
Any help in resolving this issue would be greatly appreciated.
Wayne
Hi folks, I'm new to Windows Mobile progamming, and new to this forum. Apologies in advance if I'm asking a boneheaded question, but I've done searches and can't find anything directly applicable to my problem.
I'm currently walking through the published MS tutorial in setting up an SQL Server 2005 Mobile application that subscribes to a publication on SQL Server 2005 to exchange information.
I've gotten almost all the way through... successfully set up the server components, creating the publication, etc. On the mobile side, I've been able run the cab files to install the SQL Mobile components and to create the project, add the reference to the dll, and instantiate an engine object. It compiles.
The step in the tutorial after that, though, where you specify the data source from the "data" menu, I've got a problem. When I try to use the "new connection" dialog from choosing the data connection, "MS SQL Server Mobile Edition" doesn't show up as a choice. I've tried choosing any of the other combinations, and in teh subsequent "Connection properties" section my database, SQLMobile (as in their sample) is available, but I get an error when I choose it and click OK. Clicking on "Test Connection" gives me a connection successful message.
My guess is that something about the Mobile server side components is not installed correctly on my development machine, but honestly I have no idea how to begin to fix it. Has anyone seen this problem before and know how to resolve it?
Your time and any knowledge sharing is greatly appreciated.
Thank you,
-Dana
Hi,
View 3 Replies View Related
Hi:
When I try and connecto to SQL CE I always get an invalid operation exception. I"m afraid that I did not follow the proper install for Orcas Beta 2. I can't remember if I was supposed to uninstall SQL Mobile 2005 first or not.
All I know is when I try and use my SQL CE I can't connecto to a DB / sdf file ?
Any help would be appreciated I"m just starting to use SQL CE.
thanks
mark
have SQL Server 2005 std edition SP1 installed on Windows 2003 Std edition .Configured Transactional (single Publisher and no clustered environment.)
Replication past two months working fine, Now
1.Distrib.exe application err is coming.
Due to which my job is failing (Distributor to Subscriber).
Iam attaching thw file.
Thanks
Sandeep
Hey,
don't know if it's the right place for this question but i hope you help me.
I made an application with VS 2005 that connecting to sql server file db.mdf
Now i want this application work on another user computer, and of course i don't want to install vs 2005 there.
I did install .net framework, but what i need to do to make the database work? do i have to install sql server on his computer? or is there something more simple?
I know that if i was using access file than i need to install nothing else.
please help!
thanx.
max
Hi,
There are many text records need to be storeaged in my application.
I am new guy to Sql Mobile.
If I choose sql mobile to save my data. Will my app be more complex to deploy ?
Before I use Sql Mobile on device(wm5), need I install it first?
any other advice??
Best regards
PWang
Dear MSDN Support,
It is pleasurable being in contact with you and getting the desired support, for that i am feeling free inquiring about some aspects related to my graduation project.
Well here i am facing a problem with my database. I had created a full Pocket Pc project i added references, datasources and data connection for the SQL Mobile Database i am using. While i do an query like insert,update, delete, select it works on the pocket pc emulator and i check with the emulator query analyzer. What i am asking about that i am not able to see those updates in the mobile database in the sql server 2005 mobile edition, everything is done only in the emulator but after i exit the application and check my mobile server the database is still empty !!
I appreciate your hard working, and i do believe that there is someone here who is going to provide me with the support i need.
I am looking forward to getting your reply soonly.
Thank you for your attention.
Kindly Regards;
Hi,
I'm trying to install SQL Server 2005 Mobile on a Trimble GeoExplorer (GeoXT). It is running Microsoft Pocket PC v4.20. I've installed on a WM5 device without any problems, but can't seem to get it to work with this device. Regardless of what CAB I use, it says "Unsupported System Version" and will not install. I've tried using both:
sqlce30.wce5.armv4i.CAB
sqlce30.ppc.wce5.armv4i.CAB
, without any success. Any ideas??