Invalid Column Exception
Aug 18, 2004
Hi,
I have the following query
"SELECT Test_Question.Question_ID, Test_Question.Grade_Number as GNum, Test_Question.Question_Number as QNum, Question.Question_Text as QText , Answer.Answer_Number as AnsNum, Answer.Answer_Text as AnsTxt, Answer.ID AS Ans_ID FROM Test_Question, Question, Answer WHERE Test_Question.Active=1 AND Test_Question.Question_ID = Question.ID AND Test_Question.Deleted=0 and Test_Question.Test_Detail_ID ="+ currPTestId +" AND Question.ID = Answer.Question_ID GROUP BY Test_Question.Question_ID ORDER BY Test_Question.Question_Number, Test_Question.Question_ID, Answer.Answer_Number";
But I get an exception column Test_Question.Grade_Number is invalid in the select list because it is not contained in either an aggregate function or the group by clause.
Could some one point out what is the problem in the above query.
thanks in advance
shail
View 1 Replies
ADVERTISEMENT
Apr 16, 2007
I'm attempting to deploy an application that uses SQL Server 2005 Express as a back end. I installed the application on 6 or 7 machines, and on two of those machines I'm getting an error message I just don't understand. When I try to connect to the database, I'm getting "System Exception: An invalid IP address was specified.". I'm using the <machine name><instance name> to log into the server and I can ping the associated IP address. What's even more confusing is that I can log onto this instance from any of the other machines with no problem. I'm assuming the problem isn't with the SQL instance but a setting I'm missing on the machine, but for the life of me I can't find anything. Any help would be greatly appreciated.
Chris
View 1 Replies
View Related
Jan 15, 2008
ALTER procedure [dbo].[MyPro](@StartRowIndex int,@MaximumRows int)
As
Begin
Declare @Sel Nvarchar(2000)set @Sel=N'Select *,Row_number() over(order by myId) as ROWNUM from MyFirstTable Where ROWNUM
Between ' + convert(nvarchar(15),@StartRowIndex) + ' and ('+ convert(nvarchar(15),@StartRowIndex) + '+' + convert(nvarchar(15),@MaximumRows) + ')-1'
print @Sel
Exec Sp_executesql @Sel
End
--Execute Mypro 1,4 --->>Here I Executed
Error
Select *,Row_number() over(order by myId) as ROWNUM from MyFirstTable Where ROWNUM
Between 1 and (1+4)-1
Msg 207, Level 16, State 1, Line 1
Invalid column name 'ROWNUM'.
Msg 207, Level 16, State 1, Line 1
Invalid column name 'ROWNUM
Procedure successfully created but giving error while Excuting'.
Please anybody give reply
Thanks
View 2 Replies
View Related
Jan 16, 2008
Greetings everyone, I am attempting to build my first application using Microsofts Sql databases. It is a Windows Mobile application so I am using Sql Server Compact 3.5 with Visual Studio 2008 Beta 2. When I try and insert a new row into one of my tables, the app throws the error message shown in the title of this topic.
'((System.Exception)($exception)).Message' threw an exception of type 'System.NotSupportedException'
My table has 4 columns (i have since changed my FavoriteAccount datatype from bit to Integer)
http://i85.photobucket.com/albums/k71/Scionwest/table.jpg
Account type will either be "Checking" or "Savings" when a new row is added, the user will select what they want from a combo box.
Next is a snap shot of my startup form.
http://i85.photobucket.com/albums/k71/Scionwest/form.jpg
Where it says "Favorite Account: None" in the top panel, I am using a link label. When a user clicks "None" it will go to a account creation wizard, and set the first account as it's primary/favorite. As more accounts are added the user can select which will be his/her primary/favorite. For now I am just creating a sample account when the label is clicked in an attempt to get something working. Below is the code used.
private void lnkFavoriteAccount_Click(object sender, EventArgs e)
{
FinancesDataSet.BankAccountRow account = this.financesDataSet.BankAccount.NewBankAccountRow();
account.Name = "MyBank Checking Account";
account.AccountType = "Checking";
account.Balance = Convert.ToDecimal("15.03");
account.FavoriteAccount = 1;//datatype is an integer, I have changed it since I took the screenshot.
financesDataSet.BankAccount.Rows.Add(account);
//The next three lines where added while I was trying to get this to work.
//I don't know if I really need them or not, I receive the error regardless if these are here or not.
this.bankAccountTableAdapter1.Update(financesDataSet);
this.financesDataSet.AcceptChanges();
refreshDatabase();
}
the refreshDatabase() code is here:
private void refreshDatabase()
{
this.bankAccountTableAdapter1.Fill(this.financesDataSet.BankAccount);
//Aquire a count of accounts the user has
int numAccounts = financesDataSet.BankAccount.Count;
//Loop through each account and see which one is the primary.
for (int num = 0; num != numAccounts; num++)
{
//Works ok in frmMain_Load, but when my lnkFavoriteAccount_click calls this, it throws the error.
if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)
{
//Display the primary account on our home page. User can click the link label & be taken to their account register.
this.lnkFavoriteAccount.Text = this.financesDataSet.BankAccount[num].Name.ToString();
this.lnkFavoriteFunds.Text = this.financesDataSet.BankAccount[num].Balance.ToString();
break;
}
}
}
and my form_load code
private void frmMain_Load(object sender, EventArgs e)
{
refreshDatabase();
}
So, when I click on the lnkFavoriteAccount label, and my new row gets added, the app stops at the following line in my DataSet.Designer
[global:ystem.Diagnostics.DebuggerNonUserCodeAttribute()]
public byte FavoriteAccount {
get {
try {
return ((byte)(this[this.tableBankAccount.FavoriteAccountColumn]));
}
catch (global:ystem.InvalidCastException e) {
//Stops at the following line, this error was caused by 'if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)'
throw new global:ystem.Data.StrongTypingException("The value for column 'FavoriteAccount' in table 'BankAccount' is DBNull.", e);
}
}
set {
this[this.tableBankAccount.FavoriteAccountColumn] = value;
}
}
I have no idea what I am doing wrong, all of the code I used I retreived from Microsofts help documentation included with VS2008. I have tried used my TableAdapter.Insert() method and it still failed when it got to
if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)
in my refreshDatabase() method it still failed.
When I look, the data has been added into the database, it's just when I try to retreive it now, it bails on me. Am I retreiving the information wrong?
Thanks for any help you guys can offer.
Johnathon
View 1 Replies
View Related
Apr 25, 2007
Using VS05 Pro, VB, Sql Express...
For a DBConcurrency exception, is there a way to determine the Column(s) that triggered the excepction? The exception itself does not seem to contain the information. You could probably write a very complex method comparing
DataRowVersions
, to determine which value is different, but that seems overkill.
Thanks!
Bob
View 1 Replies
View Related
May 16, 2006
OutCollection[1] holds the erroroutput columncollection.
metaData.OutputCollection[1].OutputColumnCollection.RemoveObjectByID(errOutputCol.ID);
some times 1 Or 2 columns gets deleted, after that the exception is raised.
View 1 Replies
View Related
Nov 30, 2007
Hi,
I have developed a Smart Device Application using VB.NET 2003 on top of Windows Mobile 2003 platform which is running on Symbol PPT 8846, a model used in our construction sites for gathering data bar-coded on Pipes, trucks...etc. This application uses SQL CE as its back-end database and since its difficult to cover our sites with WI-FI coverage, most of the time the application is running offline. As for that, on a daily basis, synchronization is done in the offices before the system is released into sites. I have been doing several implementations in several projects and till now everything is running fine but until I got a native exception on exporting the data back into the server database. The server database or main database is using Fox Pro and this is what led me to build a Web Service for communication between SQL CE and Fox Pro. Anyways, going back to that mysterious exception, I did some of my intensive debug on what caused it. As a start, I went through the code line by line to check if there was a memory leak from P/Invokes; but I was shocked that the exception was raised from "SQLCEDataAdapter.Fill(Dataset)" function. First thought came to mind was to hard reset and to re-install the application but no luck. Since it was about SQLCE, I moved towards checking the data found in the SQLCE database and tried to de-fragment the data found under the table needed for export. What I mean by de-fragmenting is that I grouped the data under different classes or families and created different tables depending on these classes. Then tried exporting again and Bingo the data was exported except one record...That was so weird!! huh? (The database had 515 records)
So I went for the Query Analyzer to try to view that record but no hope, it was taking too long to view the record, I just left it for more than 15 minutes and still no response from the Analyzer...it was so strange since there was only one record in that table!!!?!!! As going further, I was so curious why this record causing that native and inability to be viewed by the Analyzer?? I did testing on the column-level of that record and found out that you can view all the columns except two : nvarchar(200) and nvarchar (20)....I was able to resolve this problem with an SQL statement to update both columns with empty or dummy values...!!!!!
But after this resolution, I really don't know how it could be controlled later on!! and why it happened??
I would be glad if anyone can give me any advise on why such problem popped out and especially on the column-level in SQL CE?? And how to overcome it?
Thanks for your time and effort,
Looking forward to hear from as soon as possible...
Just for Clarification:
.NET CF 1.0 SP3
SQLCE 2.0
were used
View 1 Replies
View Related
Mar 19, 2004
I get a Invalid Column Name ' '. with this procedure. Can anyone see what migh be wrong?
Thanks,
SELECT A.CompanyName,C.FirstName,C.LastName,C.Client_ID,
CASE WHEN A.[CompanyName] IS NULL OR A.[CompanyName] = '' THEN C.[FirstName] +" "+ C.[LastName] ELSE A.[CompanyName] END AS DRName, C.Client_ID
FROM tblClients C INNER JOIN tblClientAddresses A ON C.Client_ID = A.Client_ID
WHERE (C.Client_ID = 15057) AND (A.MailTo=1) AND Convert(varchar(5), GETDATE(), 10) BETWEEN Convert(varchar(5), A.Startdate, 10) AND Convert(varchar(5), A.Enddate, 10) OR (A.Startdate Is Null) AND (A.EndDate Is Null)
GO
View 3 Replies
View Related
Aug 19, 2004
Hi the following SP that causes an error.
CREATE PROCEDURE GetInfo
(
@MinPriceint=0,
@MaxPriceint=9999999999,
@TypeHomenvarchar(50)=NULL,
@Locationnvarchar(100)=NULL
)
AS
Declare @strSql nvarchar(255)
Set @strSql="Select * from table WHERE "
Set @strSql=@strSql + 'Price BETWEEN ' + CONVERT(nvarchar(20),@MinPrice) + ' and ' + CONVERT(nvarchar(20),@MaxPrice )
If @TypeHome != "No Preference"
Set @strSql=@strSql + ' and Type = ''' + @TypeHome+ ''''
If @Location != "No Preference"
Set @strSql=@strSql + ' and City = ''' + @Location+ ''''
Set @strSql=@strSql + ' and IDX = ''Y'' ORDER BY Price'
Exec(@strSql)
GO
The Error I get is:
"Error 207: Invalide Column Name 'Select * from table WHERE'
Invalid Column Name 'No Preference'
Invalid Column Name 'No Preference'
I have checked the table and the columns do exist, spelled correctly and caps are all the same. Also, this same SP in another table works just fine.
What is causing this error?
Thanks in advance!
View 1 Replies
View Related
Feb 16, 2001
Can anyone tell me why I get the above message using the following stored procedure and passing in a value of 120:
CREATE Procedure qryAnalysisCountMain
(@WizardGroup1Question int)
As
EXEC("SELECT QuestionDescription FROM Questions WHERE QuestionCode = " + @WizardGroup1Question)
120 just happens to be the asci value of 'x' and whatever number I pass in gets converted into it's character equivalent and the sp tells me it can't find that column name. QuestionCode is an int field so there is no problem there
The procedure works OK with:
SELECT QuestionDescription FROM Questions WHERE QuestionCode = @WizardGroup1Question
However I need the SQL in an EXEC as the sp will eventually be dynamic so that i can pass in the name of the table to select from.
Thanks
Martin
View 1 Replies
View Related
Mar 30, 2004
Hi
I have a dynamic select statement which is showed below.
declare @query varchar(100)
set @query = 'select * from undergraduate where Gender =' + @Gender
exec (@query)
//
When I execute the @query, I get an error message like "Invalid Column Name Male".
I think I need to put a single quotation around the dynamic variable, so that I have
select * from undergraduate where Gender ='Male'. But I am not sure how to do that.
Thank you for your help!!
View 3 Replies
View Related
May 6, 2008
Hello All,
I m facing problem in one query. What I did is
SELECT
PRODUCT_ID,
PRODUCT_END_DATE,
CASE
WHEN PRODUCT_ID = 1 THEN DATEADD(YY,-5,PRODUCT_END_DATE)
WHEN PRODUCT_ID = 2 THEN DATEADD(YY,-10,PRODUCT_END_DATE)
WHEN PRODUCT_ID = 3 THEN DATEADD(YY,-15,PRODUCT_END_DATE)
END AS MODIFIED_END_DATE
FROM PRODUCTS
WHERE MODIFIED_END_DATE BETWEEN '2008-04-01' AND '2008-04-30'
when I execute this query returns an error as
Invalid column name MODIFIED_END_DATE
So how can I write this query? any idea.
Thanks in advance.
--kneel
View 3 Replies
View Related
Jun 16, 2008
I have my column names right but its telling me they are invalid. It must be something to do with how I have my subquery formatted but I don't see it. I was wondering if anyone else can see it? It tells me payer_id is not right and I know its coming from the bolded section. I just added that line to do some additional grouping. I know that the query above aliased as D was working before I put the bolded line in. Am I setting this up wrong?
select distinct c.description,tmp.person_id,tmp.person_nbr,tmp.first_name,
tmp.last_name,tmp.date_of_birth,d.payer_name,b.create_timestamp
from PersonMIA tmp
join person a on a.person_id = tmp.person_id
join patient_encounter b on a.person_id = b.person_id
join provider_mstr c on b.rendering_provider_id = c.provider_id
cross apply(select top 1 payer_name
from person_payer
where person_id = tmp.person_id
order by payer_id) d
join payer_mstr e on d.payer_id = e.payer_id
join mstr_lists f on e.financial_class = f.mstr_list_item_id
where c.description = 'Leon MD, Enrique'
group by c.description,tmp.person_id,tmp.person_nbr,tmp.first_name,tmp.last_name,
tmp.date_of_birth,d.payer_name,b.create_timestamp
)tmp2
where year(create_timestamp) IN (2005,2006)
group by person_nbr,payer_name,first_name,last_name,description,create_timestamp
Thanks in Advance!
Sherri
View 2 Replies
View Related
Mar 26, 2006
I am building a query and thought I had completed it but I get 'Invalid Column Name "A1" when I run it?
SELECT
Groups.GroupID,
Sum(Stages_On_Route.Distance) AS Miles_Covered,
Groups.Group_Name
FROM Groups
INNER JOIN ((Route INNER JOIN Departure ON (Route.GroupID=Departure.GroupID)
AND (Route.RouteID=Departure.RouteID))
INNER JOIN Stages_On_Route ON Route.RouteID=Stages_On_Route.RouteID)
ON Groups.GroupID=Departure.GroupID
GROUP BY Groups.GroupID,
Groups.Group_Name
HAVING (((Groups.GroupID)="A1"));
View 6 Replies
View Related
Dec 4, 2007
Hi I'm new to this forum and I seem to be having a basic problem. I have moved from using MS Access to SQL Server and I seem to be having problem with the SQL below.
SELECT Table_A.*, (Statement_A) AS Value_A ,
(Value_A + 4) AS Value_B
FROM Table_A
I keep on getting an error stating invalid column name, I know that statement A is fine because when I move the calculation into Value_B it works.
Can anyone tell me what I am doing wrong?
View 4 Replies
View Related
Jul 20, 2005
When I try to add the line . . .CPM * MOU AS COST,after all the CASE lines I get the response in SQL Query Analyser,Server: Msg 207, Level 16, State 3, Line 1Invalid column name 'CPM'.Is it because I can not do this on this particular query since CPM isyet to be defined or do I just need to rephrase the request anotherway?The query now looks like this. . .SELECT DISTINCTDATA.dbo.[2004_JANUARY_SUM].RATEKEY,DATA.dbo.[2004_JANUARY_SUM].[DATE],DATA.dbo.[2004_JANUARY_SUM].CXRKEY,DATA.dbo.[2004_JANUARY_SUM].Area,DATA.dbo.[2004_JANUARY_SUM].Region,DATA.dbo.[2004_JANUARY_SUM].Market,DATA.dbo.[2004_JANUARY_SUM].AKA,DATA.dbo.[2004_JANUARY_SUM].MARS_NAME,DATA.dbo.[2004_JANUARY_SUM].O_MTA,DATA.dbo.[2004_JANUARY_SUM].O_MTA_NAME,DATA.dbo.[2004_JANUARY_SUM].O_STATE,DATA.dbo.[2004_JANUARY_SUM].O_LATA,DATA.dbo.[2004_JANUARY_SUM].O_LATA_NAME,DATA.dbo.[2004_JANUARY_SUM].MSC_CLLI,DATA.dbo.[2004_JANUARY_SUM].Trunk,DATA.dbo.[2004_JANUARY_SUM].Carrier,DATA.dbo.[2004_JANUARY_SUM].NPA_NXX,DATA.dbo.[2004_JANUARY_SUM].CALLS,DATA.dbo.[2004_JANUARY_SUM].MOU,DATA.dbo.[2004_JANUARY_SUM].TANDEM,DATA.dbo.[2004_JANUARY_SUM].T_MTA,DATA.dbo.[2004_JANUARY_SUM].T_MTA_NAME,DATA.dbo.[2004_JANUARY_SUM].T_STATE,DATA.dbo.[2004_JANUARY_SUM].T_LATA,DATA.dbo.[2004_JANUARY_SUM].[RC ABBRE],DATA.dbo.[2004_JANUARY_SUM].RC_ID,DATA.dbo.[2004_JANUARY_SUM].SWITCH,DATA.dbo.[2004_JANUARY_SUM].[OCN],DATA.dbo.[2004_JANUARY_SUM].[OCN_NAME],DATA.dbo.[2004_JANUARY_SUM].[CATEGORY],CASE WHEN SUBSTRING(DATA.dbo.[2004_JANUARY_SUM].[MSC_CLLI], 5, 2) =DATA.dbo.[2004_JANUARY_SUM].[T_STATE] THEN(CASE WHEN DATA.dbo.[2004_JANUARY_SUM].[CARRIER] = 'VENDOR4' THENTELECOM.DBO.DOMESTIC_LD_RATES2.INTRA_GXWHEN DATA.dbo.[2004_JANUARY_SUM].[CARRIER] = 'VENDOR3' THENTELECOM.DBO.DOMESTIC_LD_RATES2.INTRA_VENDOR3WHEN DATA.dbo.[2004_JANUARY_SUM].[CARRIER] = 'VENDOR2' THENTELECOM.DBO.DOMESTIC_LD_RATES2.INTRA_VENDOR2WHEN DATA.dbo.[2004_JANUARY_SUM].[CARRIER] = 'VENDOR1' THENTELECOM.DBO.DOMESTIC_LD_RATES2.[INTRA_VENDOR1]ELSE TELECOM.DBO.DOMESTIC_LD_RATES2.INTRA_TANDEMEND)ELSE(CASE WHEN DATA.dbo.[2004_JANUARY_SUM].[CARRIER] = 'VENDOR4' THENTELECOM.DBO.DOMESTIC_LD_RATES2.INTER_GXWHEN DATA.dbo.[2004_JANUARY_SUM].[CARRIER] = 'VENDOR3' THENTELECOM.DBO.DOMESTIC_LD_RATES2.INTER_VENDOR3WHEN DATA.dbo.[2004_JANUARY_SUM].[CARRIER] = 'VENDOR2' THENTELECOM.DBO.DOMESTIC_LD_RATES2.INTER_VENDOR2WHEN DATA.dbo.[2004_JANUARY_SUM].[CARRIER] = 'VENDOR1' THENTELECOM.DBO.DOMESTIC_LD_RATES2.[INTER_VENDOR1]ELSE TELECOM.DBO.DOMESTIC_LD_RATES2.INTER_TANDEMEND)END AS CPM,CPM * MOU as [COST]INTO TEST.dbo.[2004_JANUARY_RATES]FROM DATA.dbo.[2004_JANUARY_SUM] LEFT OUTER JOINTELECOM.dbo.DOMESTIC_LD_RATES2 ONDATA.dbo.[2004_JANUARY_SUM].RATEKEY =TELECOM.dbo.DOMESTIC_LD_RATES2.RATEKEYORDER BY DATA.dbo.[2004_JANUARY_SUM].[T_LATA] DESCOPTION (MAXDOP 2)
View 1 Replies
View Related
May 9, 2008
Is there not a way to perform a calculation on a column comprised from a Case Function?
This is my query:
SELECT
'ComparativeValue' =
CASE
WHEN Id = 1 THEN Index
WHEN Id = 2 THEN Peers
WHEN Id = 3 THEN PrevYear
END,
Variance = (Base - ComparativeValue)/ComparativeValue
FROM Table
I get this error when trying to execute the query:
Invalid column name 'ComparativeValue'.
View 7 Replies
View Related
Aug 25, 2006
Below is the T-SQL
SELECT ci.name,
ci.address,
CASE ISNULL(cci.geography,'')
WHEN 'P' THEN 'port'
WHEN 'A' THEN 'appt'
WHEN 'X' THEN 'xatt'
ELSE ''
END AS Link,
ci.InsuranceType
FROM dbo.Insurance ci
INNER JOIN dbo.Contract cci
ON ci.InsuranceId = cci.InsuranceId
AND cci.ContractId = 1266
ORDER BY
ci.Link,
ci.InsuranceType
===========================
My work environment is all in SQL SERVER 2005.
I have a problem with above T-SQL. There is an error while I run above code in Develoment Server.The error disappears when I put 'ci.Link' as 'Link' in OrderBy clause. My work environment has TEST, PRE-PRODUCTION and PRODUCTION. In all other environments the code runs fine with ci.Link but only in DEVELOPMENT the error persists. It has an error as 'Link is invalid column name'.
View 6 Replies
View Related
Nov 7, 2007
I need to identify where this column could be, I have checked in the syscolumns but did not find it as a result I am now having to manually check each view and sp that could use the column so I can transfer the database to my new SQL 2005 machine.
Is there an easier way to identify this coloumn by some sort of search??
View 6 Replies
View Related
May 16, 2008
Hi,
Can I write parameter name like shown below?
Code Snippet
SELECT 'N' AS LiquidatingFlag, Report, RptSection, Portfolio, RepExcRsn, Units,
FROM Exc_SummaryData_Custom
WHERE (Report IN (@Report)) AND (Portfolio IN (@Portfolio)) AND ( LiquidatingFlag IN(@LiquidatingFlag))
UNION ALL
SELECT 'R' AS LiquidatingFlag, Report, RptSection, Portfolio, RepExcRsn, Units,
FROM Exc_SummaryData_Custom_LIQ
WHERE ( Report IN (@Report)) AND (Portfolio IN (@Portfolio)) AND ( LiquidatingFlag IN (@LiquidatingFlag))
I get a error message saying invalid column name LiquidatingFalg.
(Actually there is no clumn in the original table)Can any one help to work this correctly?
View 5 Replies
View Related
Nov 15, 2007
Hi I have the following problem. I am trying to get some data from a database which matches the name in a session from a previous page:e.g. SqlCommand menubar = new SqlCommand("Select pernme from Person where pernme = " + (string)Session["tbname"], sqlConn); SqlDataAdapter dataAdapter5 = new SqlDataAdapter(); dataAdapter5.SelectCommand = menubar; DataSet dataSet5 = new DataSet(); dataAdapter5.Fill(dataSet5); DataTable selcartest4 = dataSet5.Tables["table"]; if (selcartest4.Rows.Count != 0)The session is called tbname and in that session is a users name however insetad of doing the nornal thing and retrieving the data in the sql database table matching that name it comes up with the following error message:System.Data.SqlClient.SqlException: Invalid column name 'jamie'this is weird as the 'jamie' is the name in the session from the previous page and in fact not a column name at all the column name is pernme I am totally stuck any help would eb great thanksJ
View 2 Replies
View Related
Dec 19, 2007
When i try to execute i receive following error:
Msg 207, Level 16, State 1, Procedure WedstrijdDeelnemersSelectAllMPNietGoedgekeurd, Line 85
Invalid column name 'Ploeg'.
I dont really see whats wrong with the select... it works fine in the 2 first parts of the querryALTER PROCEDURE [dbo].[WedstrijdDeelnemersSelectAllMPNietGoedgekeurd]
-- Add the parameters for the stored procedure here
@WedstrijdID int
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
...
UNION
SELECT
dbo.fncGetPersoonNaam(L.PersoonID,0) as Persoon,
'Ploeg: ' + WDPI.Ploeg as TypeInschrijving,
WDPIL.LidClubID,
WT.Omschrijving as WedstrijdType,
C.Omschrijving as Categorie,
WDC.WedstrijdDetailID,
WDC.ID as WedstrijdDetailCategorieID,
WDPI.ID as TypeInschrijvingID
FROM
Wedstrijd W
INNER JOIN WedstrijdDetail WD ON W.ID = WD.WedstrijdID
INNER JOIN WedstrijdType WT ON WD.WedstrijdTypeID = WT.ID
INNER JOIN WedstrijdDetailCategorie WDC ON WD.ID = WDC.WedstrijdDetailID
INNER JOIN Categorie C ON WDC.CategorieID = C.ID
INNER JOIN WedstrijdDetailPloegInschrijving WDPI ON WDC.ID = WDPI.WedstrijdDetailCategorieID
INNER JOIN WedstrijdDetailPloegInschrijvingLid WDPIL ON WDPIL.WedstrijdDetailPloegInschrijvingID = WDPI.ID
...END
View 1 Replies
View Related
Jul 11, 2004
Hello all,
Does anyone see anything wrong with the sql query below
DECLARE @BUILDINGLIST nvarchar(100)
SET @BUILDINGLIST = 'ALABAMA'
DECLARE @SQL nvarchar(1024)
SET @SQL = 'SELECT id, CLOSED, building AS BUILDING FROM
requests WHERE building = (' + @BUILDINGLIST + ')'
EXEC sp_executesql @SQL
I keep on getting the following error:
Server: Msg 207, Level 16, State 3, Line 1
Invalid column name 'ALABAMA'.
Thanks in advance.
Richard M.
View 2 Replies
View Related
Jul 30, 2004
Hello,
I have a problem with my Update sql server command. The error message is strange :
System.Data.SqlClient.SqlException: Invalid column name 'CMD_DATE_ORDER'. Invalid column name 'CMD_REF_CLIENT'. at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior,
RunBehavior runBehavior, Boolean returnStream) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at ASP.addorder_aspx.MasterGrid_Update(Object Sender, DataGridCommandEventArgs E)
in C:Inetpubwwwrootproject1addorder.aspx:line 157
On line 157 I have :
UpdateCommand.ExecuteNonQuery()
The Update code :
Sub MasterGrid_Update(Sender As Object, E As DataGridCommandEventArgs)
' update the database with the new values
' get the edit text boxes
Dim dateCom As String = CType(e.Item.FindControl("dateCom"), TextBox).Text
Dim NumBon As String = CType(e.Item.FindControl("NumBon"), TextBox).Text
Dim NomDest As String = CType(e.Item.FindControl("NomDest"), TextBox).Text
Dim NovoieDest As String = CType(e.Item.FindControl("NovoieDest"), TextBox).Text
Dim nomvoieDest As String = CType(e.Item.FindControl("nomvoieDest"), TextBox).Text
Dim cpDest As String = CType(e.Item.FindControl("cpDest"), TextBox).Text
Dim villeDest As String = CType(e.Item.FindControl("villeDest"), TextBox).Text
Dim paysDest As String = CType(e.Item.FindControl("paysDest"), TextBox).Text
Dim telDest As String = CType(e.Item.FindControl("telDest"), TextBox).Text
Dim dateExp As String = CType(e.Item.FindControl("dateExp"), TextBox).Text
Dim myConnection As New SqlConnection(strConnect)
Dim UpdateCommand As SqlCommand = new SqlCommand()
UpdateCommand.Connection = myConnection
' Add to CLIID_LGN the selected value in the DropDownList
Dim cliid As String
cliid = Trim(DDL.SelectedItem.Value)
If AddingNew = True Then
UpdateCommand.CommandText = "INSERT INTO Commandes (CMD_DATE_ORDER, CMD_NUM_BON_ORDER, CMD_NOM_DEST, CMD_NOVOIE_DEST, CMD_NOMVOIE_DEST, CMD_CP_DEST, CMD_VILLE_DEST, CMD_PAYS_DEST, CMD_TEL_DEST,
CMD_DATE_EXPED, CMD_REF_CLIENT) VALUES ('" & dateCom & "','" & NumBon & "','" & NomDest & "','" & NovoieDest & "','" & nomvoieDest & "','" & cpDest & "','" & villeDest & "','" & paysDest & "','" & telDest & "',
'" & dateExp & "', '" & cliid & "')"
Else
UpdateCommand.CommandText = "UPDATE Client SET CMD_DATE_ORDER=@dateCom, CMD_NUM_BON_ORDER = @NumBon, CMD_NOM_DEST = @NomDest, CMD_NOVOIE_DEST = @NovoieDest, CMD_NOMVOIE_DEST = @NomvoieDest,
CMD_CP_DEST = @cpDest, CMD_VILLE_DEST = @villeDest, CMD_PAYS_DEST = @paysDest, CMD_TEL_DEST = @telDest, CMD_DATE_EXPED = @dateExp WHERE CMD_REF_CLIENT = '" & cliid & "'"
End If
UpdateCommand.Parameters.Add("@dateCom", SqldbType.SmallDateTime, 4).Value = Trim(dateCom)
UpdateCommand.Parameters.Add("@NumBon", SqldbType.NVarChar, 10).Value = Trim(NumBon)
UpdateCommand.Parameters.Add("@NomDest", SqldbType.NVarChar, 50).Value = Trim(NomDest)
UpdateCommand.Parameters.Add("@NovoieDest", SqldbType.NVarChar, 5).Value = Trim(NovoieDest)
UpdateCommand.Parameters.Add("@nomvoieDest", SqldbType.NVarChar, 80).Value = Trim(nomvoieDest)
UpdateCommand.Parameters.Add("@cpDest", SqldbType.NVarChar, 5).Value = Trim(cpDest)
UpdateCommand.Parameters.Add("@villeDest", SqldbType.NVarChar, 35).Value = Trim(villeDest)
UpdateCommand.Parameters.Add("@paysDest", SqldbType.NVarChar, 35).Value = Trim(paysDest)
UpdateCommand.Parameters.Add("@telDest", SqldbType.NVarChar, 14).Value = Trim(telDest)
UpdateCommand.Parameters.Add("@dateExp", SqldbType.SmallDateTime, 4).Value = Trim(dateExp)
' execute the command
Try
myConnection.Open()
UpdateCommand.ExecuteNonQuery()
Catch ex as Exception
Message.Text = ex.ToString()
Finally
myConnection.Close()
End Try
' Resort the grid for new records
If AddingNew = True Then
MasterGrid.CurrentPageIndex = 0
AddingNew = false
End If
' rebind the grid
MasterGrid.EditItemIndex = -1
BindMasterGrid()
End Sub
I have send a response.write instruction : the values are all good.
In the sql server database, the syntax of this 2 fields CMD_DATE_ORDER and CMD_REF_CLIENT are good.
Can you help me for this problem ?
Thanks.
View 4 Replies
View Related
Mar 26, 2006
I am trying to develop this query in MSSQL but am having a problem with the syntax.
I don't know why but the query is breaking on 'Invalid Column Name A1'.
Here is my query.
Code:
SELECT
Groups.GroupID,
Sum(Stages_On_Route.Distance) AS Miles_Covered,
Groups.Group_Name
FROM Groups
INNER JOIN ((Route INNER JOIN Departure ON (Route.GroupID=Departure.GroupID)
AND (Route.RouteID=Departure.RouteID))
INNER JOIN Stages_On_Route ON Route.RouteID=Stages_On_Route.RouteID)
ON Groups.GroupID=Departure.GroupID
GROUP BY Groups.GroupID,
Groups.Group_Name
HAVING (((Groups.GroupID)="A1"));
View 1 Replies
View Related
Feb 25, 2005
The following is an approximation of the code I'm trying:
SELECT 'dummy' as DummyField, FieldA, FieldB, FieldC,
FieldD, FieldE, FieldF, FieldG, FieldH, FieldI,
FieldJ, FieldK, FieldL, AVG(AMT) AS AMT,
AVG(QTY) AS QTY, FieldM
FROM GetMonthlyData('200501') as i
GROUP BY DummyField, FieldA, FieldB, FieldC,
FieldD, FieldE, FieldF, FieldG, FieldH, FieldI,
FieldJ, FieldK, FieldL, FieldM
It checks out OK syntactically but whenever I try to run it I get a message like the following:
Server: Msg 207, Level 16, State 3, Line 1
Invalid column name 'DummyField'.
Server: Msg 207, Level 16, State 1, Line 1
Invalid column name 'DummyField'.
I've also tried not giving DummyField an alias and using the 'dummy' value in the GROUP BY clause but that won't even get by the CheckMark button:
Server: Msg 164, Level 15, State 1, Line 8
GROUP BY expressions must refer to column names that appear in the select list.
:confused: Advice?
View 8 Replies
View Related
Nov 29, 2006
Hi all and I appreciate any help
I recently been assigned to a project that has an ms-access front end and sql server 2000 sp4 as the database engine.
The database was replicated (merge replication) but for some reason they drop replication and when they tried to put it back on they got allot of problems and so they paused it.
My task now is to make it work again. After allot of reading I desided to clean the database and start from the beginning. Using some scripts and instructions on a copy of the database I cleaned all the tables related to merge replication but when I went back to ms-access to update a record I got an error
"invalid column name 'rowguid'" . I checked all my tables in my database but I find not such column as it was dropped using the scripts.
Any ideas that I can use?
Thanks allot,
George
View 1 Replies
View Related
Dec 12, 2014
This is my syntax, I have removed then added back line by line by line and determined it is the insert of the variable into the table that skews.
Code:
Create Table #Table1 (ID Int Identity, p nvarchar(20))
Create Table #Table2 (date datetime, salesID int, p varchar(20))
Insert into #Table1 Values ('ZeroWireless')
Declare @Str nvarchar(4000), @p nvarchar(20)
Select @p = p
From #Table1
[code]....
View 3 Replies
View Related
Oct 2, 2005
The reference to QReceived below in the QUsageQty line gives me an error: Invalid Column Name 'QReceived'. Is there a way to reference that field?
SELECT
MEND.ProductID,
MEND.MEPeriod,
MEND.OpeningQty,
QOpenCost = MEND.OpeningDols / MEND.OpeningQty,
(SELECT Sum(UsageQty) FROM tblShipmentHdr SHPH WHERE MEND.ProductID = LEFT(SHPH.ProductID,7) And
DATEADD(mm, DATEDIFF(mm,0,SHPH.ReceivedDate), 0) = MEND.MEPeriod GROUP BY LEFT(SHPH.ProductID,7)) AS QReceived,
QUsageQty = MEND.OpeningQty + QReceived - MEND.ClosingQty,
PROD.ProductName
FROM tblMonthend MEND
LEFT OUTER JOIN dbo.tblProducts as PROD ON MEND.ProductID = PROD.ProductID
WHERE (MEND.MEPeriod =''' + convert(varchar(40),@XFromDate,121) + ''')
View 4 Replies
View Related
Jul 20, 2005
Hi,I'am trying a very simple sql statement but it does not work.I use the SQL version 8.0I use the "Northwind" sample database and the Table "Employees".The sql statement is:SELECT * From Employees Where City = "London"The returned message is:Server: Msg 207, Level 16, State 3, Line 1Invalid column name 'London'.Can somebody tell me what could be wrong?Greetings,Steven de Vries
View 3 Replies
View Related
Nov 29, 2006
Hi all,
I'm new to replication and database management so I will like some understanding and guiding as this is a new task for me.
I was given a copy of a database with merge replication on it and doing allot of reading and using some scripts I cleaned replication (or so Im thinking) and tryed to use it again on the ms-access front end. When I try to update some data I get "invalid column name 'rowguid'" , but no such column exist in my database as it was dropped.
Any help on this?
thanks George.
View 10 Replies
View Related
Feb 23, 2007
I'm trying to set up a merge publication in MSSQL 2005 SP1.
I have a database which I have successfully made into a merge publication. When I run the snapshot agent, several articles are processed successfully, then I encounter an error with the following: Invalid column name 'rowguid'
Note that none of the tables contain 'rowguid' columns before this process - I let MSSQL automatically create these as needed.
The replication monitor details the following error:
Error messages:
· Message: Invalid column name 'rowguid'.
Command Text: sp_MSpublicationview
Parameters: @publication = RelMS Publication
Stack: at Microsoft.SqlServer.Replication.AgentCore.ReMapSqlException(SqlException e, SqlCommand command)
at Microsoft.SqlServer.Replication.AgentCore.AgentExecuteNonQuery(SqlCommand command, Int32 queryTimeout)
at Microsoft.SqlServer.Replication.AgentCore.ExecuteDiscardResults(CommandSetupDelegate commandSetupDelegate, Int32 queryTimeout)
at Microsoft.SqlServer.Replication.AgentCore.ExecuteDiscardResults(CommandSetupDelegate commandSetupDelegate)
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.MakePublicationViews()
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.DoRegularMergeSnapshotPreparations()
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.DoPreArticleFilesGenerationProcessing()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
at Microsoft.SqlServer.Replication.AgentCore.Run() (Source: MSSQLServer, Error number: 4615)
Get help: http://help/4615
· Server [XXXXXXXXXX], Level 16, State 1, Procedure , Line 1
Invalid column name 'rowguid'. (Source: MSSQLServer, Error number: 4615)
Get help: http://help/4615
Can anyone shed further light on this?
Thanks.
View 9 Replies
View Related
Oct 4, 2007
Hello,
I had been developing a SSIS package for a couple of days, when I decided to do some changes to the underlying destination table. I removed a column, deleted another and renamed a couple of columns. I havent been able to execute a package on that table after that simple maneuver. I have refreshed all available transformations component but no luck. SSIS still gives me the error message below. And there are no yellow exclamation marks in the project.
I tried to isolate the problem even more by creating a new and clean Integration Services project, adding components that perform an update if the record exists in the destination table or an insert if the record is new. No success. The Oled Db Command is still complaining about columns that no longer exists in the destination table. How can deleted columns that don't exist when the project was created be referenced in the new project?
Any user input that helps me solve this problem is appreciated.
What are the best practises for making changes to the database structure, and not break the SSIS package?
[OLE DB Command [2236]] Error: SSIS Error Code DTS_E_OLEDBERROR.
An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Invalid column name 'CountryDomicileID'.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Invalid column name 'CountryDomicileName'.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Invalid column name 'CountryName'.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Invalid column name 'CountryDomicileID'.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Invalid column name 'CountryDomicileName'.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Invalid column name 'CountryName'.".
Thanks,
Mikael
View 3 Replies
View Related
