Invalid Syntax Near Keyword Default (was Why Do I Get The Following Error?)
Mar 8, 2005select * from CurrencyMaster where default=true
invalid syntax near keyword default.
select * from CurrencyMaster where default=true
invalid syntax near keyword default.
Hi i have the following code in my sql database;CASE dbo.tblWorkSchedule.WorkScheduleType_ID WHEN 1 THENCASE IsNull(dbo.tblSurvey.WorkScheduleOverallStatus_ID,0) WHEN 4 THENdbo.tblWorkSchedule.UpliftedRate ELSE dbo.GetSWT_PropertyYearPeriodRate (IsNull(tblRateSchedule.WorkType_ID,0) ,tblWorkSchedule.WorkSchedule_ID , tblSurvey.PropertyYear_ID , tblSurvey.PropertyPeriod_ID ) END I want to add the following lines to it, however it gives me an error "Error 156: Incorrect syntax near the keyword "WHEN". What do i need to do, thank you. WHEN 3 THEN dbo.tblWorkSchedule.UpliftedRate ELSE dbo.GetSWT_PropertyYearPeriodRate (IsNull(tblRateSchedule.WorkType_ID,0) ,tblWorkSchedule.WorkSchedule_ID , tblSurvey.PropertyYear_ID , tblSurvey.PropertyPeriod_ID ) END
Hi,
I am building a website and database system for a university project, and am getting an error message when inserting data to a table (error message = "System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'WHERE'."). I would be most grateful if anybody could point out where I am going wrong! My code is;
using System;
using System.Collections;
using System.Configuration;
using System.Data;
using System.Data.SqlClient;
using System.Linq;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.HtmlControls;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Xml.Linq;
public partial class Default2 : System.Web.UI.Page
{protected void Page_Load(object sender, EventArgs e)
{if ((Session["sUserName"]) == null)
{Response.Redirect("Default.aspx");
}
else
{Convert.ToString(Session["sUserName"]);
}
}protected void Register(object sender, EventArgs e)
{
//Create the ConnectionSqlConnection sqlConn =
new SqlConnection("server=Acer-Laptop\SQLEXPRESS; database=NeuCar; Trusted_Connection=true");
//Open the connection
sqlConn.Open();
//Create the Command, passing in the SQL statement and the ConnectionString queryString = "INSERT INTO Member (FirstName, LastName, Title, Email, AddressLine1, AddressLine2, TownOrCity, County, Postcode) VALUES(@myFirstName, @myLastName, @myTitle, @myEmail, @myAddressLine1, @myAddressLine2, @myTownOrCity, @myCounty, @myPostcode) WHERE Member (UserName = @myUserName); ";
SqlCommand cmd = new SqlCommand(queryString, sqlConn);cmd.Parameters.Add(new SqlParameter("@myUserName", Session["sUserName"]));
cmd.Parameters.Add(new SqlParameter("@myFirstName", FirstNameTextBox.Text));cmd.Parameters.Add(new SqlParameter("@myLastName", LastNameTextBox.Text));
cmd.Parameters.Add(new SqlParameter("@myTitle", TitleTextBox.Text));cmd.Parameters.Add(new SqlParameter("@myEmail", ConfirmEmailTextBox.Text));
cmd.Parameters.Add(new SqlParameter("@myAddressLine1", AddressLine1TextBox.Text));cmd.Parameters.Add(new SqlParameter("@myAddressLine2", AddressLine2TextBox.Text));
cmd.Parameters.Add(new SqlParameter("@myTownOrCity", TownOrCityTextBox.Text));cmd.Parameters.Add(new SqlParameter("@myCounty", CountyTextBox.Text));cmd.Parameters.Add(new SqlParameter("@myPostcode", PostcodeTextBox.Text));
cmd.ExecuteNonQuery();
Response.Redirect("Register.aspx");
//Close the connection
sqlConn.Close();
}
}
Also, is this line of code correct for passing a session variable into a parameter?;
cmd.Parameters.Add(new SqlParameter("@myUserName", Session["sUserName"]));
Many thanks for your time and help!
Chima
I am getting error "Incorrect syntax near the keyword 'else'"
below is my code
declare @a varchar(15), @b Float(12) ,@c Float(12),@m varchar(15),@n Float(15),@av Float(15),@xav float(15)
SELECT @a=reverse(Substring(reverse(remarks),Charindex('tS',REVERSE(remarks))+2,4))
FROM [IVRS_MIS].[dbo].[logs] where app_name='IVFRT_POC' and remarks like '%answered%'
if @a = 1020
SELECT @m = '1022', @n = Count(@a), @av = Count(@a)/4.0 ,@b = substring(MAX(right(node_info, charindex('X',reverse(node_info))-8)),1,5) ,@c=substring(MIN(right(node_info, charindex('X',reverse(node_info))-8)),1,5),@xav=(@b+@c)/2.0
FROM [IVRS_MIS].[dbo].[logs]
[code].....
Just out of curiosity, why would the query below error out with a syntax error near keyword group? The inside query runs fine. By the way, I know that this can be simplified by changing the projection in the inside query and moving the group by into it, but I'd like to understand why this version does not work.
Thanks!
Code Block
select paceid, count(*) as paceidcount
from
(SELECT T_MemberRoster.PaceID, T_MemberRoster.IntakeDate, T_MemberRoster.LastFullDemog, T_PACE_Demographics.CreateDate
FROM T_MemberRoster INNER JOIN
T_PACE_Demographics ON T_MemberRoster.PaceID = T_PACE_Demographics.PACE_ID AND
T_MemberRoster.DescCharEffDate = T_PACE_Demographics.DescCharEffDate
WHERE T_MemberRoster.LastFullDemog BETWEEN CONVERT(DATETIME, '2007-10-01 00:00:00', 102) AND CONVERT(DATETIME, '2007-10-31 00:00:00', 102)
)
group by paceid
order by count(*) desc
I am getting error "Incorrect syntax near the keyword 'Select'." while running the below query.
DECLARE @DATEPROCESS DATETIME;
SET @DATEPROCESS = CAST(DATEADD(D, -((DATEPART(WEEKDAY, GETDATE()) + 1 + @@DATEFIRST) % 7), GETDATE()) AS DATE)
insert into tempjoin([PART], [SPLRNAME], [SHIPDAYS], [SPRICE]) values
(Select distinct
RC. CAT_PART AS PART,
RC. CAT_SUPPLIER AS SUPPLIER,
FFC.[Ships Within Days] AS SHIPDAYS,
ffc.[Sell Price] AS SPRICE
[code]....
Following is the stored procedure iam trying to create.Here i am trying to
First create a table with the table name passed as parameter
Second I am executing a dynamic sql statement ("SELECT @sql= 'Select * from table") that returns some rows.
Third I want to save the rows returned by the dynamic sql statement ("SELECT @sql= 'Select * from table") in the tablei created above.All the columns and datatypes are matching.
This table would be further used with cursor.
Now i am getting a syntax error on the last line.Though i doubt whether the last 3 lines will execute properly.Infact how to execute a sp_executesql procedure in another dynamic sql statement.ANy suggestions will be appreciated.
CREATE PROCEDURE [dbo].[sp_try]
@TempTable varchar(25)
AS
DECLARE @SQL nvarchar(MAX)
DECLARE @SQLINSERT nvarchar(MAX)
BEGIN
--create temp table
SELECT @Sql= N'CREATE TABLE ' + QUOTENAME(@TempTable) +
'(
ContactName varchar (40) NOT NULL ,
ContactId varchar (30) NOT NULL ,
ContactrMessage varchar (100) NOT NULL,
)'
EXEC sp_executesql @Sql, N'@TempTable varchar(25)', @TempTable = @TempTable
SELECT @sql= 'Select * from table'
SELECT @sqlinsert = 'INSERT INTO ' + quotename( @TempTable )
SELECT @sqlinsert = @sqlinsert + EXEC sp_executesql @sql, N'@Condition varchar(max)', @Condition=@Condition
EXEC sp_executesql @SQLINSERT, N'@TempTable varchar(25)', @TempTable = @TempTable
Hi all,
Could someone please help me!!! I am using a multi-value parameter in SQL 2005 reports and am getting the following error message:
An error has occured during report processing.
Qiery execution failed for dataset
an expression of non-boolean type specified in a context where condition is expected, near ','
Incorrect syntax near keyword else.
The multi-value parameter works when it isn't run in the if, else clause i checked the where clause with a single paramter and it works OK. I don't understand what is causing this problem but I really need to fix it. Here is my query.
if @job_SubRep_ProjNo_param = '0'
Begin
select Job_Job_No as job, Job_Job_Name as Job_title,
cast(Job_Total_Fee as float) as fee,
employee_first_name + ' ' + employee_surname as jl_name,
cast(Job_Percent_Complete as float) as percentcomplete,
cast(Job_Work_Done as float) as workdone,
cast(Job_Invoicing as float) as job_Invoicing,
job_WIP,
Job_Expenditure as timecost,
job_project_no,
Job_Profit_Loss,
cast(Job_Hours as float) as hours,
job_expenses
from job_tbl
inner join project_tbl on job_project_no = project_no
inner join employee_tbl on job_jl_empno = employee_no
where project_pl_empno = @pl_employeeNo or job_jl_empno = @jl_subRep
end
else
select Job_Job_No as job, Job_Job_Name as Job_title,
cast(Job_Total_Fee as float) as fee,
employee_first_name + ' ' + employee_surname as jl_name,
cast(Job_Percent_Complete as float) as percentcomplete,
cast(Job_Work_Done as float) as workdone,
cast(Job_Invoicing as float) as job_Invoicing,
job_WIP,
Job_Expenditure as timecost,
job_project_no,
Job_Profit_Loss,
cast(Job_Hours as float) as hours,
job_expenses
from job_tbl
inner join project_tbl on job_project_no = project_no
inner join employee_tbl on job_jl_empno = employee_no
where job_project_no in (@job_SubRep_ProjNo_param) or job_jl_empno = @jl_subRep
Thanks in advance!!
Katie
declare @sql nvarchar(MAX)
SELECT @sql = (SELECT 'UPDATE STATISTICS ' +
quotename(s.name) + '.' + quotename(o.name) +
' WITH FULLSCAN; ' AS [text()]
FROM sys.objects o
JOIN sys.schemas s ON o.schema_id = s.schema_id
WHERE o.type = 'U'
FOR XML PATH(''), TYPE).value('.', 'nvarchar(MAX)');
PRINT @sql
EXEC (@sql)
The below Dynamic TSQL throws Error:
Error:
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'FOR'.
USE master
GO
DECLARE @str varchar(max), @sql nvarchar(MAX), @dbName nvarchar(max);
SET @dbName = 'user_db';
PRINT N'CHECKING DATABASE ' + @dbName;
SET @sql = 'USE ' + @dbname + ';' + '(SELECT '+'''UPDATE STATISTICS ''' + '+ ' + 'quotename(s.name)'+ '+' + '''.''' + '+' + 'quotename(o.name)' + '+' + '''WITH FULLSCAN; ''' + ' AS [text()]
FROM sys.objects o
JOIN sys.schemas s ON o.schema_id = s.schema_id
WHERE o.type ' +'= ' + '''U'' FOR XML PATH('' ''),TYPE).value(''.'''+ ','+ '''nvarchar(MAX)'''+')'
Print @sql
EXEC (@sql)
Not sure, why this is an error at FOR...
Every time i open table to edit data with SSDT and filter some column to find row to edit, when i try to do the edit i get the error
"Incorrect syntax near keyworld 'WHERE'",
But then if i give ok and esc, refreshing data the value i entered is stored.
I am having this error when using execute query for CTE
Help will be appriciated
@pvColumnName VARCHAR(100) = Default,
However, I am unable to determine what is the value for Default. Is it '' ?
Default is not permitted as a constant - below fails to parse:
WHERE t2.TABLE_TYPE = 'BASE TABLE'
AND (@pvColumnName = Default OR t1.[COLUMN_NAME] Like @vColumnName)
Why does the following call to a stored procedure get me this error:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'CONVERT'.
Code Snippet
EXECUTE OpenInvoiceItemSP_RAM CONVERT(DATETIME,'01-01-2008'), CONVERT(DATETIME,'04/30/2008') , 1,'81350'
The stored procedure accepts two datetime parameters, followed by an INT and a varchar(10) in that order.
I can't find anything wrong in the syntax for CONVERT or any nearby items.
Help me please. Thank you.
What I am trying to create a query to check, If recDT is not value or null, then will use value from SELECT top 1 recDtim FROM Serv. Otherwise, will use the value from recDT. I have tried the below query but it doesn't work. The error says, Incorrect syntax near the keyword 'SELECT'.Incorrect syntax near the keyword 'else'.1 SELECT
2 case when recDT='' then SELECT top 1 recDtim FROM Serv else recDT end
3 FROM abc
4
Anyone can help? Thanks a lot.
Hi,
I have set up a publisher using transactional replication. ( all seems ok). The initial snapshot has been generated.
The replication share on the distributor has all the generated DDL in it.
I add a subscriber. The tables are generated up to tblCountry then I get an incorrect syntax near ')' error
The Replication Monitor shows the following code as the cause. ( bold indicates incorrect sql)
Is this a bug in Replication (as this is an autogenerated sp)or have I configured something incorrectly?
The ddl for the table index is as follows ( from the replication folder)
/----
CREATE TABLE [APP].[tblCountry](
[CountryId] AS ([ISO 3166-1 NUMERIC-3]) PERSISTED NOT NULL,
[CountryCode] AS ([ISO 3166-1 ALPHA-2]) PERSISTED NOT NULL,
[CountryName] [varchar](80) COLLATE Latin1_General_CI_AS NOT NULL,
[ISO 3166-1 ALPHA-2] [char](2) COLLATE Latin1_General_CI_AS NOT NULL,
[ISO 3166-1 ALPHA-3] [char](3) COLLATE Latin1_General_CI_AS NOT NULL,
[ISO 3166-1 NUMERIC-3] [int] NOT NULL
)
GO
---/
/------ Keys ddl (.dx)
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [PK_TBLCOUNTRY] PRIMARY KEY CLUSTERED ([CountryId])
go
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [UQ_TBLCOUNTRY_ALPHA2] UNIQUE NONCLUSTERED ([ISO 3166-1 ALPHA-2])
go
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [UQ_TBLCOUNTRY_ALPHA3] UNIQUE NONCLUSTERED ([ISO 3166-1 ALPHA-3])
go
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [UQ_TBLCOUNTRY_COUNTRYNAME] UNIQUE NONCLUSTERED ([CountryName])
go
--------/
/------------
Command attempted:
create procedure "sp_MSins_APPtblCountry_msrepl_ccs"
@c1 int,@c2 varchar(80),@c3 char(2),@c4 char(3),@c5 int
as
begin
if exists ( select * from "APP"."tblCountry"
where
)
begin
update "APP"."tblCountry" set
"CountryName" = @c2
,"ISO 3166-1 ALPHA-2" = @c3
,"ISO 3166-1 ALPHA-3" = @c4
,"ISO 3166-1 NUMERIC-3" = @c5
where
end
else
begin
insert into "APP"."tblCountry"(
"CountryName"
,"ISO 3166-1 ALPHA-2"
,"ISO 3166-1 ALPHA-3"
,"ISO 3166-1 NUMERIC-3"
)
values (
@c2
,@c3
,@c4
(Transaction sequence number: 0x00000016000004F2014500000000, Command ID: 213)
------------/
I'm sure I am not undestanding some basic concept here but the following formula always produces an invalid token error at the '-' sign. In this example, I'm trying to subtract out a specific month from the total (this is a simplified example, my actual formula needs to compute a % change over time using lag...)
This produces the invalid token error (it always errors at the '-' in the equation)
with member [Measures].[MyCalcMeasure] as [Measures].[MyBaseMeasure]-([Date Submitted].[Date Submitted YQMD].[month].&[2008]&[1],[Measures].[MyBaseMeasure])
select [Measures].[MyCalcMeasure] on columns,
[MyDim].[MyHierarchy].[Level1].members on rows
from MyCube
But this works
with member [Measures].[MyCalcMeasure] as [Measures].[MyBaseMeasure]
select [Measures].[MyCalcMeasure] on columns,
[MyDim].[MyHierarchy].[Level1].members on rows
from MyCube
As does this
with member [Measures].[MyCalcMeasure] as ([Date Submitted].[Date Submitted YQMD].[month].&[2008]&[1],[Measures].[MyBaseMeasure])
select [Measures].[MyCalcMeasure] on columns,
[MyDim].[MyHierarchy].[Level1].members on rows
from MyCube
What am I missing?
I have a function which performs a query and returns a table. The oneparameter that can get passed in is a date which defaults to NULL.There is an IF statement in the function that will set the paramter toan actual date if null. If I call the function while passing in a datethe function comes back a second or 2 later. But if I pass in DEFAULTto the function, the same query takes 8 minutes. See code below andsample call below.CREATE FUNCTION fCalculateProfitLossFromClearing (@TradeDate DATETIME = NULL)RETURNS @t TABLE ([TradeDate] DATETIME,[Symbol] VARCHAR(15),[Identity] VARCHAR(15),[Exchange] VARCHAR(5),[Account] VARCHAR(10),[Value] DECIMAL(18, 6))ASBEGIN-- Use previous trading date if none specifiedIF @TradeDate IS NULLSET @TradeDate = Supporting.dbo.GetPreviousTradeDate()-- Make the queryINSERT @tSELECT@TradeDate,tblTrade.[Symbol],tblTrade.[Identity],tblTrade.[Exchange],tblTrade.[Account],SUM((CASE tblTrade.[Side] WHEN 'B' THEN -ABS(tblTrade.[Quantity])ELSE ABS(tblTrade.[Quantity]) END) * (tblPos.[ClosingPrice] -tblTrade.[Price])) AS [Value]FROMHistorical.dbo.ClearingTrade tblTradeLEFT JOIN Historical.dbo.ClearingPosition tblPos ON (@TradeDate =tblPos.[TradeDate] AND tblTrade.[Symbol] = tblPos.[Symbol] ANDtblTrade.[Identity] = tblPos.[Identity])WHERE([TradeTimestamp] >= @TradeDate AND [TradeTimestamp] < DATEADD(DAY,1, @TradeDate))GROUP BY tblTrade.[Symbol],tblTrade.[Identity],tblTrade.[Exchange],tblTrade.[Account]RETURNENDIf I call the function asSELECT * FROM fCalculateProfitLossFromClearing('09/25/2003')it returns in 2 seconds.If I call the function asSELECT * FROM fCalculateProfitLossFromClearing(DEFAULT)in which GetPreviousTradeDate() will set @TradeDate to 09/25/2003 itreturns in 8 minutes.
View 6 Replies View RelatedHi,I have written a stored procedure to add the records to the table in DB from the report I generate, but the sored procedure gives me this error:Incorrect syntax near the keyword 'ELSE'.I am using Sql Server 2005.SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[spCRMPublisherSummaryUpdate]( @ReportDate smalldatetime, @SiteID int, @DataFeedID int, @FromCode varchar, @Sent int, @Delivered int, @TotalOpens REAL, @UniqueUserOpens REAL, @UniqueUserMessageClicks REAL, @Unsubscribes REAL, @Bounces REAL, @UniqueUserLinkClicks REAL, @TotalLinkClicks REAL, @SpamComplaints int, @Cost int)ASDECLARE @PKID INTDECLARE @TagID INTSELECT @TagID=ID FROM Tag WHERE SiteID=@SiteID AND FromCode=@FromCode SELECT @PKID=PKID FROM DimTag WHERE TagID=@TagID AND StartDate<=@ReportDate AND @ReportDate< ISNULL(EndDate,'12/31/2050')IF @PKID IS NULL BEGIN SELECT TOP 1 @PKID=PKID FROM DimTag WHERE TagID=@TagID AND SiteID=@SiteIDENDDECLARE @LastReportDate smalldatetime, @LastSent INT, @LastDelivered INT, @LastTotalOpens Real, @LastUniqueUserOpens Real, @LastUniqueUserMessageClicks Real, @LastUniqueUserLinkClicks Real, @LastTotalLinkClicks Real, @LastUnsubscribes Real, @LastBounces Real, @LastSpamComplaints INT, @LastCost INT SELECT @Sent=@Sent-Sent,@Delivered=@Delivered-Delivered,@TotalOpens=@TotalOpens-TotalOpens,@UniqueUserOpens=@UniqueUserOpens-UniqueUserOpens,@UniqueUserMessageClicks=@UniqueUserMessageClicks-UniqueUserMessageClicks,@UniqueUserLinkClicks=@UniqueUserLinkClicks-UniqueUserLinkClicks,@TotalLinkClicks=@TotalLinkClicks-TotalLinkClicks,@Unsubscribes=@Unsubscribes-Unsubscribes,@Bounces=@Bounces-Bounces,@SpamComplaints=@SpamComplaints-SpamComplaints,@Cost=@Cost-Cost FROM CrmPublisherSummary WHERE @LastReportDate < @ReportDate AND SiteID=@SiteID AND TagPKID=@PKIDUPDATE CrmPublisherSummary SET Sent=@Sent, Delivered=@Delivered, TotalOpens=@TotalOpens, UniqueUserOpens=@UniqueUserOpens, UniqueUserMessageClicks=@UniqueUserMessageClicks, UniqueUserLinkClicks=@UniqueUserLinkClicks, TotalLinkClicks=@TotalLinkClicks, Unsubscribes=@Unsubscribes, Bounces=@Bounces, SpamComplaints=@SpamComplaints, Cost=@Cost WHERE ReportDate=@ReportDate AND SiteID=@SiteID AND TagPKID=@PKIDELSE SET NOCOUNT ON INSERT INTO CrmPublisherSummary( ReportDate, SiteID, TagPKID, Sent, Delivered, TotalOpens, UniqueUserOpens, UniqueUserMessageClicks, UniqueUserLinkClicks, TotalLinkClicks, Unsubscribes, Bounces, SpamComplaints, Cost, DataFeedID, TagID) SELECT @ReportDate, @SiteID, @PKID, @Sent, @Delivered, @TotalOpens, @UniqueUserOpens, @UniqueUserMessageClicks, @UniqueUserLinkClicks, @TotalLinkClicks, @Unsubscribes, @Bounces, @SpamComplaints, @Cost, @DataFeedID, @TagIDSET NOCOUNT OFF
View 5 Replies View RelatedGetting this error.. the page runs fine but it after entering the data it produces the following..
ERROR: Incorrect syntax near the keyword 'FROM'. with the following code...Please help!
<head runat="server"><title>Parts Lookup</title></head><body style="text-align: center"><form id="form1" runat="server"><div style="text-align: center"><br /><brpan style="font-size: 10pt; font-family: Tahoma">
Enter a Part Number</span>
<asp:TextBox ID="Productnbr" runat="server" Columns="4" Width="177px"></asp:TextBox><br /><asp:Button ID="DisplayPartNumberButton" runat="server" Text="Display Price, Description, Unit of Measure" Font-Names="Tahoma" /><br />
<br />
</div><asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataSourceID="PartFilterDataSource" EnableViewState="False" Width="431px" CellPadding="4" ForeColor="#333333" GridLines="None" Font-Bold="False"><Columns><asp:BoundField DataField="PartNbr" HeaderText="Part Number" SortExpression="PartNbr" /><asp:BoundField DataField="Description" HeaderText="Description" SortExpression="Description" /><asp:BoundField DataField="Price" HeaderText="Price" SortExpression="Price" /><asp:BoundField DataField="UnitOfMeasure" HeaderText="Unit of Measure" SortExpression="UnitOfMeasure" /></Columns><FooterStyle BackColor="#5D7B9D" Font-Bold="True" ForeColor="White" /><RowStyle BackColor="#F7F6F3" ForeColor="#333333" /><EditRowStyle BackColor="#999999" /><SelectedRowStyle BackColor="#E2DED6" Font-Bold="True" ForeColor="#333333" /><PagerStyle BackColor="#284775" ForeColor="White" HorizontalAlign="Center" /><HeaderStyle BackColor="#5D7B9D" Font-Bold="True" ForeColor="White" /><AlternatingRowStyle BackColor="White" ForeColor="#284775" /></asp:GridView> <asp:SqlDataSource ID="PartFilterDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:ManManSQLConnectionString %>" SelectCommand="SELECT PartNbr, Description, UnitOfMeasure, Price; FROM Tbl_ODBC_PartsList; WHERE PartNbr = @Productnbr"><SelectParameters><asp:ControlParameter ControlID="Productnbr" Name="Productnbr" PropertyName="Text"/></SelectParameters></asp:SqlDataSource></form></body></html>
HiI am getting the following error on my Select statement: Incorrect syntax near the keyword 'AS'. SELECT [A], [B], [C], [D], [E], [F], [G], [H], [I], [J], [K], RowFROM(SELECT ROW_NUMBER() OVER (ORDER BY [J] DESC)AS Row, [A], [B], [C], [D], [E], [F], [G], [H], [I], [J], [K]FROM [TABLE]WHERE (([A] LIKE '%' + @A+ '%') OR ([K] LIKE '%' + @K+ '%')) AS LogWithRowNumbersWHERE (Row >=91 AND Row <= 100) I used the following select statement as a template (which works fine): SELECT [A], [B],
[C], [D], [E], [F],
[G], [H], [I], [J],
[K], [L], Row
FROM (SELECT ROW_NUMBER() OVER (ORDER
BY [H] DESC)
AS Row, [A], [B],
[C], [D], [E], [F],
[G], [H], [I], [J],
[K], [L] FROM [TABLE]
WHERE (([J] = @J) AND
([E] >= @E)) AND
(([K] < [L]) OR (([K] = 0) AND
([L] = 0)))) AS LogWithRowNumbers
WHERE (Row >= 82 AND Row <= 90) What is the difference that would make one work and the other not work?Thanks if you can help,Jon
Hi,I was just wondering if some kind soul on here could help me. I created a table in a database with called 'EuropeBroadcastList', with the following columns: Name, First Name, First, Last Name, Last, Title, Company, Photo.I have created a query whereby I want to create a new table with only specific columns called 'EuropeBroadcastSorted' and sort the names in 'EuropeBroadcastList' by the 'Last' column. The query is: CREATE TABLE europebroadcastsorted AS (SELECT [name], title, company, photo, [Last] FROM EuropeBroadcastList ORDER BY Last ASC); When I execute it I get the following syntax errors: Msg 156, Level 15, State 1, Line 2Incorrect syntax near the keyword 'AS'.Msg 156, Level 15, State 1, Line 4Incorrect syntax near the keyword 'ORDER'.Can any kind person help me resolve this?Thanks Rob
View 4 Replies View RelatedCan someone help me? I am trying to script an SQL statement that would allow someone to INSERT a new username into a database where it is not a duplicate entry. The table is like this:
UserID - int, 4, identity(1,1)
UserName - nvarchar(50)
UserPass - nvarchar(50)
The code to execute this where i am getting the errors is this:
Function ChooseUName()
If Page.IsValid Then
Dim objCon As New SqlConnection(con)
Dim sqlInsert As String = "INSERT INTO tblUser (UserName) " & _
"VALUES (@Username) WHERE NOT EXISTS (SELECT UserName FROM tblUser)"
Dim cmd As New SqlCommand(sqlInsert, objCon)
cmd.Parameters.Add("@Username", SqlDbType.NVarChar, 50)
cmd.Parameters("@Username").Value = txtUsername.Text
Dim id As Integer
Try
objCon.Open()
id = cmd.ExecuteScalar()
Finally
If objCon.State = ConnectionState.Open Then
objCon.Close()
End If
End Try
Response.Write("Your User ID is: " & id.ToString())
Response.End()
End If
End Function
This is the error:
Incorrect syntax near the keyword 'WHERE'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'WHERE'.
Source Error:
Line 73: Try
Line 74: objCon.Open()
Line 75: id = cmd.ExecuteScalar()
Line 76: Finally
Line 77: If objCon.State = ConnectionState.Open Then
PLEASE HELP!! I'M ON A STRICT DEADLINE!!! :o THANKS IN ADVANCE!
Hi Guys,
This one is driving me nuts... I have been getting this error in my Asp.Net page. I run the profiler and then I can grab the actual query, and when I run this query in query analizer, it works just fine...
I have no clue at all about what's going wrong with my code or query...
cmd.CommandText = "exec mydatabase.dbo.mytable @select = 'Select convert(varchar(20),J.Datecreated,107)as Date, max(J.datecreated)As DateOrd from table1 J Left Join table2 C on J.CustID = C.CustID where C.Mode = 1 group by convert(varchar(20),J.DateCreated ,107) order by max(J.datecreated) DESC', @sumfunc = 'count(ID)', @pivot = 'Staff', @table = 'table1'"
-=========================
STORED Procedure
CREATE PROC myTable
(
@select varchar(8000),
@sumfunc varchar(100),
@pivot varchar(100),
@table varchar(100)
)
AS
DECLARE @sql varchar(8000), @delim varchar(1)
SET NOCOUNT ON
SET ANSI_WARNINGS OFF
EXEC ('SELECT ' + @pivot + ' AS pivot INTO ##pivot FROM ' + @table + ' WHERE 1=2')
EXEC ('INSERT INTO ##pivot SELECT DISTINCT ' + @pivot + ' FROM ' + @table + ' WHERE '
+ @pivot + ' Is Not Null')
SELECT @sql='', @sumfunc=stuff(@sumfunc, len(@sumfunc), 1, ' END)' )
SELECT @delim=CASE Sign( CharIndex('char', data_type)+CharIndex('date', data_type) )
WHEN 0 THEN '' ELSE '' END
FROM tempdb.information_schema.columns
WHERE table_name='##pivot' AND column_name='pivot'
SELECT @sql=@sql + '''' + convert(varchar(100), pivot) + ''' = ' +
stuff(@sumfunc,charindex( '(', @sumfunc )+1, 0, ' CASE ' + @pivot + ' WHEN '
+ @delim + convert(varchar(100), pivot) + @delim + ' THEN ' ) + ', ' FROM ##pivot
DROP TABLE ##pivot
SELECT @sql=left(@sql, len(@sql)-1)
SELECT @select=stuff(@select, charindex(' FROM ', @select)+1, 0, ', ' + @sql + ' ')
print @select
EXEC (@select)
SET ANSI_WARNINGS ON
SET NOCOUNT OFF
thanks in advance...
Hi
i want to copy tables from sql to accessi gave
SELECT Persons.* INTO Persons IN 'Backup.mdb'
FROM Persons The error is Incorrect syntax near the keyword 'in'any one reply me
Hi, I have Error when I write this SQL statement retrieving the non selected facilitator for a specific course:
The SQL statement:
SELECT facilitators.facilitator_id, facilitators.facilitator_name
FROM facilitators INNER JOIN
[transaction_ facilitators] ON facilitators.facilitator_id <> [transaction_ facilitators].trans_Facilitator_id
WHERE (NOT (facilitators.facilitator_id IN
(SELECT [transaction_ facilitators].trans_Facilitator_id
FROM [transaction_ facilitators]
WHERE [transaction_ facilitators].trans_Course_id = 2)))
GROUP BY facilitators.facilitator_id, facilitators.facilitator_name
ORDER BY facilitators.facilitator_id
Every thing goes right until I change this:
WHERE [transaction_ facilitators].trans_Course_id = 2
To
WHERE [transaction_ facilitators].trans_Course_id = @course_id
It gives me this error:
Incorrect syntax near the keyword "From"
Any suggestion ??
Hi..am getting this error "Incorrect syntax near the keyword 'inner'.
Can anyone please get me the correct query..
My Query is:
Code:
SELECT iCalls_Calls.CALL_ID,C.CALL_ID, iCalls_Calls.REQUESTOR, iCalls_Users.USER_NAME, DESCRIPTION, TYPE, SCOPE, SEVERITY, CAST(E.COUNT1/F.COUNT2 AS VarChar(5)), iCalls_Calls.STATUS_ID, iCalls_Status.STATUS_ID, iCalls_Status.STATUS_LABEL FROM iCalls_Calls C INNER JOIN(SELECT CALL_ID,COUNT(CALL_ID)AS COUNT1 FROM iCalls_Events GROUP BY CALL_ID) E ON C.CALL_ID=E.CALL_ID INNER JOIN(SELECT CALL_ID,COUNT(CALL_ID)AS COUNT2 FROM iCalls_Events WHERE EVENTS_FLAG <> 0 GROUP BY CALL_ID ) F ON C.CALL_ID=F.CALL_ID ((iCalls_Calls inner join iCalls_Status on iCalls_Calls.STATUS_ID=iCalls_Status.STATUS_ID) inner Join iCalls_Users on iCalls_Calls.REQUESTOR=iCalls_Users.USER_ID) left outer join iCalls_Messages on iCalls_Calls.CALL_ID=iCalls_Messages.CALL_ID WHERE REQUESTOR='" & Session("USER_ID") & "' AND iCalls_Calls.STATUS_ID <> 6 ORDER BY iCalls_Calls.CALL_ID
Thanks...
I keep getting erroe.. incorrect syntax near the keyword 'where'
"SELECT ISNULL(LastName, '') + SPACE(1) + ISNULL(FirstName, '') AS FullName,Grade,ClassID FROM studentsInfo,StudentClassDetails Where StudentsInfo.StudentID = StudentClassDetails.StudentID And FullName='" & aName & "' And where ClassID='" & clsID & "' group by fullname"
I'm trying to add a sub-query to my initial query, and I continue to receive the error Incorrect Syntax error. I've tried rearranging my join placements, but I continue to receive the error.
IF OBJECT_ID('TEMPDB..#TMP1C') IS NOT NULL DROP TABLE #TMP1C
select distinct T.PRIN_MON,
T.AGNT_MON,
T.SUB_ACCT_NO_MON,
s.RES_NAME_SBB,
hs.ADDR1_HSE,
hs.RES_CITY_HSE,
hs.RES_STATE_HSE,
[code].....
Hi Guys, I am new to SQL IF THEN Statements, I am having problems getting the code below to check out in my SQL Syntax checked.
I would really appreciate some assistance from anyone because I am sure that the answer is really simple.
CREATE PROCEDURE CheckCan2
@Position1 varchar(150),
@Position2 varchar(150),
@Position3 varchar(150),
@userid int
AS
BEGIN TRAN
If (@Position1 <> '') THEN
SELECT jobs.id, jobs.startdate, jobs.title, jobs.company, jobs.startdate, jobs.duration, jobs.salary, jobs.dateadded, jobs.city, jobs.country FROM jobs, details, seekers WHERE seekers.position=jobs.position AND seekers.userid=@userid
GO
ElseIf (@Position1 <> '') AND (@Position2 <> '') THEN
SELECT jobs.id, jobs.startdate, jobs.title, jobs.company, jobs.startdate, jobs.duration, jobs.salary, jobs.dateadded, jobs.city, jobs.country FROM jobs, details, seekers WHERE (details.discipline2=jobs.position AND details.userid=@userid) OR (seekers.position=jobs.position AND seekers.userid=@userid)
GO
ElseIf (@Position1 <> '') AND (@Position2 <> '') AND (@Position3 <> '') THEN
SELECT jobs.id, jobs.startdate, jobs.title, jobs.company, jobs.startdate, jobs.duration, jobs.salary, jobs.dateadded, jobs.city, jobs.country FROM jobs, details, seekers WHERE ((details.discipline2=jobs.position OR details.discipline3=jobs.position) AND details.userid=@userid) OR (seekers.position=jobs.position AND seekers.userid=@userid)
GO
END IF
END TRAN
Hi Everyone,I really tried to not post this question but I gave up. I tried brackets,parenth...etc but nothing worked. I get this error message: Incorrect syntaxnear the keyword 'THEN'. Please help, I am learning SQL Server.thanks in advance.Ismailuse misselect CLAIM_DETAILS_HCVW.INTEREST, CLAIM_DETAILS_HCVW.NET, CLAIM_HMASTERS_VS.CLAIMNO,'AMOUNT' =CASE WHEN (CLAIM_DETAILS_HCVW.INTEREST IS NULL THEN '0' ELSECLAIM_DETAILS_HCVW.INTEREST + CLAIM_DETAILS_HCVW.NET)END,FROM CLAIM_HMASTERS INNER JOIN CLAIM_HMASTERS ON CLAIM_HMASTERS_VS.CLAIMNO =CLAIM_DETAILS_HCVW.CLAIMNOwhere CLAIM_HMASTERS_VS.CLAIMNO like '200601119%'--Message posted via SQLMonster.comhttp://www.sqlmonster.com/Uwe/Forum...eneral/200608/1
View 2 Replies View RelatedAny Ideas as to this error message. I am trying to learn using ms sqlserver 7.0Below is the code I am using for an update to a MS Sql Database.<%@ Language=VBScript %><% Option Explicit %><html><head><title>Sample Script 2 - Part 3 </title><!-- copyright MDFernandez ---><link rel="stylesheet" type="text/css" href="../part3sol/style.css"></head><body bgcolor="#FFFFFF"><!--#include virtual="/adovbs.inc"--><center><%Dim oRSDim ConnDim IdDim NameDim StreetAddressDim CityDim StateDim ZipDim PhoneNumberdim sqlId = request.form("Id")Name = request.form("Name")StreetAddress = request.form("StreetAddress")City = request.form("City")State = request.form("State")Zip = request.form("Zip")PhoneNumber = request.form("PhoneNumber")Set Conn = Server.CreateObject("ADODB.Connection")Conn.open =("DRIVER=SQL Server;SERVER=(local);UID=;APP=AspRunnerProfessionalApplication;WSID=COMPAQAM;DATABASE=FriendsContactI nfo;Trusted_Connection=Yes")'Conn.Opensql="update FPFriends"sql=sql & " set Name='" & Name & "',"sql=sql & "StreetAddress='" & StreetAddress & "',"sql=sql & "Ciy='" & City & "',"sql=sql & "State='" & State & "',"sql=sql & "Zip='" & Zip & "',"sql=sql & "PhoneNumber='" & PhoneNumber & "',"sql=sql & " WHERE Id=" & Idset oRS=Conn.Execute (sql)response.write "<font face='arial' size=4>"response.write "<br><br>The record has been updated."response.write "</b></font>"' close the connection to the databaseConn.Close%><!-- don't include in sample code display ---><form><input type="button" value=" Close This Window "onClick="window.location='aboutus.htm'"><br><button onClick="window.location='menu1_1.asp'">Update anotherrecord</button></form></center></body></html>
View 1 Replies View RelatedHello,
I'm receiving this error: Msg 156, Level 15, State 1, Procedure pnpcart_GetCustomer_Details, Line 50
Incorrect syntax near the keyword 'WHERE'.
Code Snippet
ALTER PROCEDURE [dbo].[pnpcart_GetCustomer_Details]
-- Add the parameters for the stored procedure here
@inSearchBy varchar(20),
@inSearchFor varchar(100)
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @SQL varchar(500)
if (@inSearchBy='Email' or @inSearchBy='HomePhone')
begin
set @SQL = 'SELECT * FROM dbo.pnpcart_Customer_Details WHERE ' + @inSearchBy + ' = ''' + @inSearchFor + ''''
exec ( @SQL )
end
else
begin
SELECT
dbo.pnpcart_Customer_Details.UserID, dbo.aspnet_Users.UserName
FROM
dbo.pnpcart_Customer_Details INNER JOIN dbo.aspnet_Users
ON
dbo.pnpcart_Customer_Details.UserID = dbo.aspnet_Users.UserName
GROUP BY
dbo.pnpcart_Customer_Details.UserID, dbo.aspnet_Users.UserName
WHERE dbo.aspnet_Users.UserName = ''+@inSearchFor+''
end
END
My logic behind this code is utilize .NET membership database tables with one of my tables called pnpcart_Customer_Details. Instead of recreating the wheel I decided to INNER JOIN the columns dbo.pnpcart_Customer_Details.UserID = dbo.aspnet_Users.UserName, and do a search for the value of @inSearchFor. Every time I want to search for a value of a variable I always end up creating dynamic sql code. I'm trying to stay away from dynamic sql. Any help with my error and how to stay away from dynamic sql is greatly appreciated. Thanks!
-Rich
Hello, I have the following query. When I run the query I get the following error message: "Incorrect syntax near keyword SELECT"--------------------------------------------------- SELECT * FROM (SELECT ROW_NUMBER() OVER(ORDER BY DateAdded) AS rownum, * FROM SELECT TOP (100) PERCENT Videos.VideoId, Videos.UserId, Videos.UserName, Videos.Title, Videos.Description, Videos.Tags, Videos.VideoLength, Videos.TimesHeard, Videos.ImageURL, Videos.RecType, Videos.Language, Videos.Category, Videos.DateAdded, Videos.RewardProgram, Videos.EditorChoice, TB2.hitsFROM Videos LEFT OUTER JOIN (SELECT TOP (100) PERCENT VideoId, COUNT(*) AS hits FROM (SELECT TOP (100) PERCENT UserId, VideoId, COUNT(*) AS cnt1 FROM Hits GROUP BY VideoId, UserId) AS TB1 GROUP BY VideoId) AS TB2 ON Videos.VideoId = TB2.VideoIdORDER BY TB2.hits DESC) AS T1WHERE rownum <= 5----------------------------------------- If I run the query that is in BOLD as: SELECT *
FROM (SELECT ROW_NUMBER() OVER(ORDER BY DateAdded) AS rownum, * FROM Videos) AS T1 WHERE rownum <=5the query runs just fine. Also if I run the query that is NOT bold (above), it also runs fine. What can I do to run them both together as seen above? Thank in advance,Louis