Invalid Table Name
Dec 1, 2006Good evening,
I have created a table named Student and i get the error:invalid table name.
I have changed it many times (like st,stud)and i get the same error.
What shall i do now?
ADVERTISEMENT
Table Does Not Exist Or Is Invalid...
Mar 14, 2008I have an appplication which creates triggers on tables. It works on nearly every table I have in my repository except for one. When I attempt to apply it to that one, I get the following:
"The object TABLENAME does not exist or is invalid for this operation."
I know the table exists and am able to access data in it just fine. So what are all possible reasons why CREATE TRIGGER might be an invalid operation for it?
SQLDescribeParam With Subselect: Invalid Parameter Number/Invalid Descriptor Index
Apr 21, 2008Hello,
I've got the following query:
SELECT zA."ID" AS fA_A
, zA."TEXT" AS fA_B
, (
SELECT COUNT(zC."ID")
FROM Test."Booking" AS zC
) AS fA_E
FROM Test."Stack" AS zA
WHERE zA."ID" = ?
With this query I call:
- SQLPrepare -> SQL_SUCCESS=0
- SQLNumParams -> SQL_SUCCESS=0, pcpar = 1
- SQLDescribeParam( 1 ) -> SQL_ERROR=-1, [Microsoft][ODBC SQL Server Driver]Invalid parameter number", "[Microsoft][ODBC SQL Server Driver]Invalid Descriptor Index"
Is there a problem with this calling sequence or this query? Or is this a problem of SQL Server?
Regards
Markus
'Invalid Object' When Select From Table I Own.
Nov 9, 2000I have a database owned by the sa. In the database are some tables owned by id1. When I login via SQL Analyzer as id1 and try to select from
the tables owned by id1, I get an error message 208 that the object does not exist. If I query 'select * from id1.table', I get my data. I thought that
if I owned the table I could always access it. Additional facts, id1 is defined as a login, id1 is defined as a user for the database with db_owner role.
Any ideas?
Thanks,
Jen
Foreign Key References Invalid Table
May 15, 2008Hey.
I'm trying to create some tables in my database but I'm getting some errors... The one which is causing the most trouble is Msg 1767, Level 16, State 0, Line 38
Foreign key 'ten_fk' references invalid table 'Tenant'.
I'm not sure why it's complaining... can anyone help me out here?
Cheers!
-- Mitch Curtis
-- A2create.sql
-- Set the active database to KWEA.
USE KWEA;
-- Drop existing tables (if any).
DROP TABLE Ownership;
DROP TABLE Tenant;
DROP TABLE Staff;
DROP TABLE Property;
DROP TABLE Property_Status_Report;
DROP TABLE Property_Owner;
DROP TABLE Placement_Record;
DROP TABLE Candidate_Tenant;
DROP TABLE Waiting_List;
-- Create new tables.
CREATE TABLE Waiting_List
(
waiting# INT IDENTITY(1,1) PRIMARY KEY NOT NULL,
candidate_name VARCHAR(20) NOT NULL,
anticipated_start_date SMALLDATETIME NULL,
anticipated_end_date SMALLDATETIME NULL,
max_affordable_rent SMALLMONEY NOT NULL
);
CREATE TABLE Candidate_Tenant
(
candidate# INT IDENTITY(1,1) PRIMARY KEY NOT NULL,
waiting# INT NULL,
name VARCHAR(20) NOT NULL,
phone_number INT NOT NULL,
required_property_type VARCHAR(10) NOT NULL,
CONSTRAINT w_fk FOREIGN KEY(waiting#) REFERENCES Waiting_List(waiting#)
);
CREATE TABLE Placement_Record
(
opening# INT IDENTITY(1,1) PRIMARY KEY NOT NULL,
tenant# INT NOT NULL,
start_date SMALLDATETIME NOT NULL,
end_date SMALLDATETIME NOT NULL,
total_bonds SMALLMONEY NOT NULL,
weekly_rent SMALLMONEY NOT NULL,
CONSTRAINT ten_fk FOREIGN KEY(tenant#) REFERENCES Tenant(tenant#)
);
CREATE TABLE Property_Owner
(
owner# INT IDENTITY(1,1) PRIMARY KEY NOT NULL,
name VARCHAR(20) NOT NULL,
phone_number INT NOT NULL
);
CREATE TABLE Property_Status_Report
(
address VARCHAR(30) NOT NULL,
report_date SMALLDATETIME NOT NULL,
weekly_rent SMALLMONEY NOT NULL,
month_rent_start_date SMALLDATETIME NOT NULL,
month_rent_end_date SMALLDATETIME NOT NULL,
maintenance_fee SMALLMONEY NOT NULL,
month_inspection_history VARCHAR(30) NULL,
CONSTRAINT ar_pk PRIMARY KEY(address, report_date),
FOREIGN KEY(address) REFERENCES Property(address)
);
CREATE TABLE Property
(
address VARCHAR(30) PRIMARY KEY NOT NULL,
staff# INT IDENTITY(1,1) NOT NULL,
type VARCHAR NOT NULL,
occupant_limit INT NOT NULL,
comments VARCHAR(30) NULL,
FOREIGN KEY(staff#) REFERENCES Staff(staff#)
);
CREATE TABLE Staff
(
staff# INT IDENTITY(1,1) PRIMARY KEY NOT NULL,
manager# INT NOT NULL,
name VARCHAR(20) NOT NULL,
FOREIGN KEY(manager#) REFERENCES Staff(staff#)
);
CREATE TABLE Tenant
(
tenant# INT IDENTITY(1,1) PRIMARY KEY NOT NULL,
staff# INT NOT NULL,
property_address VARCHAR(30) NOT NULL,
name VARCHAR(20) NOT NULL,
phone_number INT NOT NULL,
street VARCHAR(20) NOT NULL,
city VARCHAR(20) NOT NULL,
postcode INT NOT NULL,
category VARCHAR(10) NOT NULL,
comments VARCHAR(30) NULL,
FOREIGN KEY(staff#) REFERENCES Staff(staff#),
FOREIGN KEY(property_address) REFERENCES Property(address)
);
CREATE TABLE Ownership
(
address VARCHAR(30) NOT NULL,
owner# INT NOT NULL,
CONSTRAINT ao_pk PRIMARY KEY(address, owner#),
FOREIGN KEY(address) REFERENCES Property(address),
FOREIGN KEY(owner#) REFERENCES Property_Owner(owner#)
);
-- Display tables.
SELECT * FROM Waiting_List;
SELECT * FROM Candidate_Tenant;
SELECT * FROM Placement_Record;
SELECT * FROM Property_Owner;
SELECT * FROM Property_Status_Report;
SELECT * FROM Property;
SELECT * FROM Staff;
SELECT * FROM Tenant;
SELECT * FROM Ownership;
Errors:
Msg 3701, Level 11, State 5, Line 8
Cannot drop the table 'Ownership', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Line 9
Cannot drop the table 'Tenant', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Line 10
Cannot drop the table 'Staff', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Line 11
Cannot drop the table 'Property', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Line 12
Cannot drop the table 'Property_Status_Report', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Line 13
Cannot drop the table 'Property_Owner', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Line 14
Cannot drop the table 'Placement_Record', because it does not exist or you do not have permission.
Msg 1767, Level 16, State 0, Line 38
Foreign key 'ten_fk' references invalid table 'Tenant'.
Msg 1750, Level 16, State 0, Line 38
Could not create constraint. See previous errors.
Invalid Primary Key Error During Table Linking
Dec 30, 2005Hi,
Something strange has happened to my table. I used Enterprise Manager today to delete 3 columns. When I went to re-link the table using Access Linked Table Manager, it gave me an error. I then deleted the link to the table, and tried to Link it again using 'Get External Data---Link Tables'. I am getting an error (no surprise!):
" 'dbo.tblSpaceUse.PK_RoomID' is not a valid name. Make sure that it does not include invalid characters or punctuation and that it is not too long".
When I go into Enterprise Manager to 'manage Indexes' on the table, it shows me that the existing index is in fact dbo.tblSpaceUse.PK_RoomID.
About a month ago, I had to rename the index, because it had been pointing to the wrong table. The SQL I used to rename it (in Query Analyzer) is:
EXEC sp_rename 'dbo.tblSpaceUse.PK_RoomID', 'tblSpaceUse.PK_RoomID', 'INDEX'
I have been using the table successfully since then, until today. I have not done anything with the index; the only change I attempted was to delete 3 columns (not related to the index). I do not think I have made any changes to the table since I renamed the index.
I tried to run the rename SQL again (a desperate attempt!) and get the error message:
Server: Msg 15248, Level 11, State 1, Procedure sp_rename, Line 192
Either the parameter @objname is ambiguous or the claimed @objtype (INDEX) is wrong.
Any ideas on what went wrong and what I can do to fix it???
Thanks,
Lori
Invalid Object Name When Linking To SQL Table From Access!
Nov 17, 2006After Upsizing a table to sql I linked to that table using access db
Now when i use one of my forms i get a [Invalid Object name "tablename''], not sure why but i am clearly link and the table is in sql!
Can you help!
SQL 2012 :: Global Temp Table - Invalid Object Name
Feb 13, 2015I have created a global temp table in Step1 of SQL Job.
I have used that in remaining steps of same job...i ran the job
But i got error message like invalid object name ##xxxxxxxx later i have included as tempdb..##xxxxxxxx also. the i got invalid reference for...
From my SSMS:-
But i was able to do select query for the same from my SSMS...
i have incorporated all steps in single step and completed job...
My question is why ##temp table created in step1 is not able to use in other steps of same job ?
SQL Server 2012 Enterprise Edition
SQL Statement Not Producing Any Error For Invalid Column In A Table
Sep 2, 2006Hi,
I am using SQL Server 2005 with SP1 patch update.I have tow tables
X table fields:
ClientID,ClientName,ClientRegisteredNumber,HoldingName,HoldingRegisteredNumber,NumberOfHoldings
Y table fields:
ClientID,ClientName,RegisteredNumber,HoldingName,HoldingRegisteredNumber,NumberOfHoldings
If i run a query for X table:
SELECT RegisteredNumber FROM X it produces the error like this
Msg 207, Level 16, State 1, Line 1
Invalid column name 'RegisteredNumber'.
But if i run the query for X,Y table:
SELECT * FROM Y WHERE RegisteredNumber NOT IN
(SELECT RegisteredNumber FROM X)
It's not producing any errors.
Why this? Is this the SQL Bug or my query problem?
Can anyone explain how to solve this?
Balaji
Get Invalid Cursor State When Modifying A Table In SQL 2000
Jul 3, 2007When I try to modify a table that I just created I get the following error message: - Unable to modify table ODBC error:[Mircrosoft][ODBC SQL Server Driver] Invalid cursor state.
SP3 has been applied to SQL Server 2000.
Can anyone help explain what is causing this error? There is sufficient space for the database and transaction log.
Correcting Invalid Dates From A Text File Before Loading SQL Table
Apr 8, 2008Each month we process 100+ text files into our ERP system. Occasionaly the Voucher Date in the text file does not contain a valid date. I would like to check to see if it is a valid Date, if it isn't replace it with the current date.
I thought I would use a Derived Column transformation, but I don't know how to check a field to see if it is a valid date.
Can anyone help?
Thanks,
Jeff
[rsInvalidDataSetName] The Table ‘table1’ Refers To An Invalid DataSetName ‘DataSet1’.
Mar 6, 2008
Hi:
I'm having trouble with some old reports I had created. I changed the Data Set name from the default, "DataSet1' to something more meagningful, saved all, refreshed all, selected refresh, selected 'overwrite data source' in report properties but keep getting the error message listed when I try and preview and/or publish.
[rsInvalidDataSetName] The table €˜table1€™ refers to an invalid DataSetName €˜DataSet1€™.
If I execute the query in the data set tab, it runs fine & returns data correctly.
Any clues?
Replication Invalid Syntax Error: Table Has Computed Primary Key
Sep 13, 2006Hi,
I have set up a publisher using transactional replication. ( all seems ok). The initial snapshot has been generated.
The replication share on the distributor has all the generated DDL in it.
I add a subscriber. The tables are generated up to tblCountry then I get an incorrect syntax near ')' error
The Replication Monitor shows the following code as the cause. ( bold indicates incorrect sql)
Is this a bug in Replication (as this is an autogenerated sp)or have I configured something incorrectly?
The ddl for the table index is as follows ( from the replication folder)
/----
CREATE TABLE [APP].[tblCountry](
[CountryId] AS ([ISO 3166-1 NUMERIC-3]) PERSISTED NOT NULL,
[CountryCode] AS ([ISO 3166-1 ALPHA-2]) PERSISTED NOT NULL,
[CountryName] [varchar](80) COLLATE Latin1_General_CI_AS NOT NULL,
[ISO 3166-1 ALPHA-2] [char](2) COLLATE Latin1_General_CI_AS NOT NULL,
[ISO 3166-1 ALPHA-3] [char](3) COLLATE Latin1_General_CI_AS NOT NULL,
[ISO 3166-1 NUMERIC-3] [int] NOT NULL
)
GO
---/
/------ Keys ddl (.dx)
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [PK_TBLCOUNTRY] PRIMARY KEY CLUSTERED ([CountryId])
go
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [UQ_TBLCOUNTRY_ALPHA2] UNIQUE NONCLUSTERED ([ISO 3166-1 ALPHA-2])
go
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [UQ_TBLCOUNTRY_ALPHA3] UNIQUE NONCLUSTERED ([ISO 3166-1 ALPHA-3])
go
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [UQ_TBLCOUNTRY_COUNTRYNAME] UNIQUE NONCLUSTERED ([CountryName])
go
--------/
/------------
Command attempted:
create procedure "sp_MSins_APPtblCountry_msrepl_ccs"
@c1 int,@c2 varchar(80),@c3 char(2),@c4 char(3),@c5 int
as
begin
if exists ( select * from "APP"."tblCountry"
where
)
begin
update "APP"."tblCountry" set
"CountryName" = @c2
,"ISO 3166-1 ALPHA-2" = @c3
,"ISO 3166-1 ALPHA-3" = @c4
,"ISO 3166-1 NUMERIC-3" = @c5
where
end
else
begin
insert into "APP"."tblCountry"(
"CountryName"
,"ISO 3166-1 ALPHA-2"
,"ISO 3166-1 ALPHA-3"
,"ISO 3166-1 NUMERIC-3"
)
values (
@c2
,@c3
,@c4
(Transaction sequence number: 0x00000016000004F2014500000000, Command ID: 213)
------------/
Invalid Results For Order By On Select Query Against Table Variable
Jan 21, 2008I am attempting to sort the results of a query executed against a table variable in descending order. The data is being inserted into the table variable as expected, however when I attempt to order the results in descending order, the results are incorrect. I have included the code as well as the result set.
DECLARE @tblCustomRange AS TABLE
(
RecordID INTEGER IDENTITY(1,1),
RangeMonth INTEGER,
RangeDay INTEGER
)
DECLARE @Month INTEGER
DECLARE @Day INTEGER
-- Initialize month and day variables.
SET @Month = 8
SET @Day = 11
-- Insert records into the table variable.
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (1,2)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (1,27)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (6,10)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (9,22)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (12,16)
-- Select everything from the table variable ordering the results by month, day in
-- descending order
SELECT * FROM @tblCustomRange
WHERE (RangeMonth < @Month) OR
(RangeMonth = @Month AND RangeDay <= @Day)
ORDER BY RangeMonth, RangeDay DESC
I am getting the following resultset:
RecordID RangeMonth RangeDay
----------- ----------- -----------
2 1 27
1 1 2
3 6 10
I am expecting the following resultset:
RecordID RangeMonth RangeDay
----------- ----------- -----------
3 6 10
2 1 27
1 1 2
SqlException Was Unhandeld By User Code??? (Invalid Object Name 'Access Table')
Jul 6, 2006Hello,I am getting a SqlException with title "SqlException was unhandled by user code" and then it says "Invalid object name 'Access Table'.here is my code (this is from my login page:)<script runat="server">
Protected Sub Login1_Authenticate(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.AuthenticateEventArgs)
Dim conn As SqlConnection
Dim cmd As SqlCommand
Dim cmdString As String = "SELECT [Password] FROM [AccessTable] WHERE" & _
" (([Username] = @Username) AND ([Password] = @Password))"
conn = New SqlConnection("Data Source=GDB03SQL;Initial Catalog=GDBRemitance;Persist Security Info=True;User ID=remitance;Password=remitance")
cmd = New SqlCommand(cmdString, conn)
cmd.Parameters.Add("@Username", SqlDbType.VarChar, 50)
cmd.Parameters("@Username").Value = Me.Login1.UserName
cmd.Parameters.Add("@Password", SqlDbType.VarChar, 50)
cmd.Parameters("@Password").Value = Me.Login1.Password
conn.Open()
Dim myReader As SqlDataReader
myReader = cmd.ExecuteReader(CommandBehavior.CloseConnection)
If myReader.Read() Then
FormsAuthentication.RedirectFromLoginPage(Me.Login1.UserName, False)
Else
Response.Write("Invalid credentials")
End If
myReader.Close()
End Sub
</script> The error is comming from the myReader = cmd.Execute(CommandBehavior.CloseConnection)Thanks for any suggestions or ideas.
Invalid Object Name '#TmpTable' Whenselecting From Temporary Table Made Using INTO From Exec(@str)
Apr 8, 2008Hello,
Can anyone shed some light on why the following:
declare @str varchar(2000)
set @str = 'SELECT * INTO #TmpTable FROM FormHistory'
exec (@str)
SELECT * FROM #TmpTable
gives the following error:
Invalid object name '#TmpTable'.
This is a very cutdown version of what I am trying to achieve so it might not seem obvious why I am writing it into a string and using exec but in the real code I do need to do this. I have cut it right back to try to get to the bottom of why this doesn't work. I suspect the # in the string is causing the problems.
Thanks for any help
Pivot Table In AdventureWorks: Invalid Column Names DepartmentID And ShiftID
Jan 3, 2008Hi all,
I executed the following T-SQL code from a tutorial book and executed it in my SQL Server Management Studio Express (SSMSE):
--PivotTable.sql--
USE Adventureworks
GO
SELECT ShiftID, Name
FROM HumanResources.Shift
SELECT EmployeeID, ShiftID, Name
FROM HumanResources.Employee, HumanResources.Department
WHERE Employee.DepartmentID = Department.DepartmentID
--Compute the number of employees by
--department name and shift
SELECT Name, [1] AS 'Day', [2] AS 'Evening',
[3] AS 'Night'
FROM
(SELECT e.EmployeeID, edh.ShiftID, d.Name
FROM HumanResources.Employee e
JOIN HumanResources.EmployeeDepartmentHistory edh
ON e.EmployeeID = edh.EmployeeID
JOIN HumanResources.Department d
ON edh.DepartmentID = d.DepartmentID) st
PIVOT
(
COUNT (EmployeeID)
FOR ShiftID IN
( [1], [2], [3])
) AS spvt
ORDER BY Name
--For display in book
SELECT Name, [1] AS 'Day', [2] AS 'Evening',
[3] AS 'Night'
FROM
(SELECT e.EmployeeID, edh.ShiftID, CAST(d.Name AS nvarchar(26)) 'Name'
FROM HumanResources.Employee e
JOIN HumanResources.EmployeeDepartmentHistory edh
ON e.EmployeeID = edh.EmployeeID
JOIN HumanResources.Department d
ON edh.DepartmentID = d.DepartmentID) st
PIVOT
(
COUNT (EmployeeID)
FOR ShiftID IN
( [1], [2], [3])
) AS spvt
ORDER BY Name
IF EXISTS(SELECT name FROM sys.tables WHERE name = 'pvt')
DROP TABLE pvt
GO
--Create a table that saves the result of a pivot with employee
--names instead of numbers for column values
SELECT VName, [164] 'Mikael Q Sandberg', [198] 'Arvind B Rao',
[223] 'Linda P Meisner', [231] 'Fukiko J Ogisu'
INTO pvt
FROM
(SELECT PurchaseOrderID, EmployeeID, v.Name as 'VName'
FROM Purchasing.PurchaseOrderHeader h
JOIN Purchasing.Vendor v
ON h.VendorID = v.VendorID) p
PIVOT
(
COUNT (PurchaseOrderID)
FOR EmployeeID IN
( [164], [198], [223], [231], [233] )
) pvt
ORDER BY VName
GO
--Show an excerpt FOR VName starting with A
SELECT TOP 5 * FROM pvt
WHERE VName LIKE 'A%'
GO
--For display in book
SELECT TOP 5 CAST(VName AS NVARCHAR(22)) 'VName',
[Mikael Q Sandberg], [Arvind B Rao],
[Linda P Meisner], [Fukiko J Ogisu]
FROM pvt
WHERE VName LIKE 'A%'
GO
--VendorID for Advanced Bicycles is 32
--Four PurchaseOrderID column values exist in PurchaseOrderHeader
--with VendorID values of 32 and EmployeeID values of 164
SELECT VendorID, Name FROM Purchasing.Vendor WHERE Name = 'Advanced Bicycles'
SELECT PurchaseOrderID FROM Purchasing.PurchaseOrderHeader WHERE VendorID = 32 and EmployeeID = 164
--Unpivot values
SELECT TOP 8 VName, Employee, OrdCnt
FROM
(SELECT VName, [Mikael Q Sandberg], [Arvind B Rao],
[Linda P Meisner], [Fukiko J Ogisu]
FROM pvt) p
UNPIVOT
(OrdCnt FOR Employee IN ([Mikael Q Sandberg],
[Arvind B Rao], [Linda P Meisner], [Fukiko J Ogisu])
)AS unpvt
GO
--For display in book
SELECT TOP 8 CAST(VName AS nvarchar(28)) 'VName', CAST(Employee AS nvarchar(18)) 'Employee', OrdCnt
FROM
(SELECT VName, [Mikael Q Sandberg], [Arvind B Rao],
[Linda P Meisner], [Fukiko J Ogisu]
FROM pvt) p
UNPIVOT
(OrdCnt FOR Employee IN
([Mikael Q Sandberg], [Arvind B Rao],
[Linda P Meisner], [Fukiko J Ogisu])
)AS unpvt
GO
--Query to check unpivoted values
SELECT TOP 2 *
FROM pvt
ORDER BY VName ASC
GO
--For display in book
SELECT TOP 2 CAST(VName AS NVARCHAR(22)) 'VName',
[Mikael Q Sandberg], [Arvind B Rao],
[Linda P Meisner], [Fukiko J Ogisu]
FROM pvt
ORDER BY VName ASC
GO
IF EXISTS(SELECT name FROM sys.tables WHERE name = 'pvt')
DROP TABLE pvt
GO
========================================
I got the following error messages and results:
Msg 207, Level 16, State 1, Line 7
Invalid column name 'DepartmentID'.
Msg 207, Level 16, State 1, Line 5
Invalid column name 'ShiftID'.
(86 row(s) affected)
(5 row(s) affected)
(5 row(s) affected)
(1 row(s) affected)
(4 row(s) affected)
(8 row(s) affected)
(8 row(s) affected)
(2 row(s) affected)
(2 row(s) affected)
=================================================
I do not know why I got these 2 errors and how to correct them. Please help and advise me how to correct the mistakes and obtain the completely printed-out correct results.
Thanks in advance,
Scott Chang
SQL Server 2014 :: Execute Stored Procedure To Update A Table / Invalid Object Name
Jan 21, 2015I am trying to execute a stored procedure to update a table and I am getting Invalid Object Name. I am create a cte named Darin_Import_With_Key and I am trying to update table [dbo].[Darin_Address_File]. If I remove one of the update statements it works fine it just doesn't like trying to execute both. The message I am getting is Msg 208, Level 16, State 1, Line 58 Invalid object name 'Darin_Import_With_Key'.
BEGIN
SET NOCOUNT ON;
WITH Darin_Import_With_Key
AS
(
SELECT [pra_id]
,[pra_ClientPracID]
[code]....
Common Table Expression (CTE) T-SQL Errors:Invalid Object Name 'ProductItemPrices'.The Variablename '@TopEmp' Has Been Declared
Jan 4, 2008Hi all,
I copied the following code from a tutorial book and executed it in my SQL Server Management Studio Express (SSMSE):
--CET.sql--
USE AdventureWorks
GO
--Use column value from a table pointed at by a foreign key
WITH ProductItemPrices AS
(
SELECT ProductID, AVG(LineTotal) 'AvgPrice'
FROM Sales.SalesOrderDetail
GROUP BY ProductID
)
SELECT p.Name, pp.AvgPrice
FROM ProductItemPrices pp
JOIN
Production.Product p
ON
pp.ProductID = p.ProductID
ORDER BY p.Name
SELECT * FROM ProductItemPrices
GO
--Display rows from SalesOrderDetail table with a LineTotal
--value greater than the average for all Linetotal values with
--the same ProductID value
WITH ProductItemPrices AS
(
SELECT ProductID, AVG(LineTotal) 'AvgPrice'
FROM Sales.SalesOrderDetail
GROUP BY ProductID
)
SELECT TOP 29 sd.SalesOrderID, sd.ProductID, sd.LineTotal, pp.AvgPrice
FROM Sales.SalesOrderDetail sd
JOIN
ProductItemPrices pp
ON pp.ProductID = sd.ProductID
WHERE sd.LineTotal > pp.AvgPrice
ORDER BY sd.SalesOrderID, sd.ProductID
--Return EmployeeID along with first and last name of employees
--not reporting to any other employee
SELECT e.EmployeeID, c.FirstName, c.LastName
JOIN HumanResources.Employee e
ON e.ContactID = c.ContactID
JOIN HumanResources.EmployeeDepartmentHistory d
ON d.EmployeeID = e.EmployeeID
JOIN HumanResources.Department dn
ON dn.DepartmentID = d.DepartmentID)
JOIN Empcte a
ON e.ManagerID = a.empid)
--Order and display result set from CTE
SELECT * Hi all,
I copied the following T-SQL code from a tutorial book and executed it in my SQL Server Management Studio Express (SSMSE):
--CTE.sql--
USE AdventureWorks
GO
--Use column value from a table pointed at by a foreign key
WITH ProductItemPrices AS
(
SELECT ProductID, AVG(LineTotal) 'AvgPrice'
FROM Sales.SalesOrderDetail
GROUP BY ProductID
)
SELECT p.Name, pp.AvgPrice
FROM ProductItemPrices pp
JOIN
Production.Product p
ON
pp.ProductID = p.ProductID
ORDER BY p.Name
SELECT * FROM ProductItemPrices
GO
--Display rows from SalesOrderDetail table with a LineTotal
--value greater than the average for all Linetotal values with
--the same ProductID value
WITH ProductItemPrices AS
(
SELECT ProductID, AVG(LineTotal) 'AvgPrice'
FROM Sales.SalesOrderDetail
GROUP BY ProductID
)
SELECT TOP 29 sd.SalesOrderID, sd.ProductID, sd.LineTotal, pp.AvgPrice
FROM Sales.SalesOrderDetail sd
JOIN
ProductItemPrices pp
ON pp.ProductID = sd.ProductID
WHERE sd.LineTotal > pp.AvgPrice
ORDER BY sd.SalesOrderID, sd.ProductID
--Return EmployeeID along with first and last name of employees
--not reporting to any other employee
SELECT e.EmployeeID, c.FirstName, c.LastName
FROM HumanResources.Employee e
JOIN Person.Contact c
ON e.ContactID = c.ContactID
where ManagerID IS NULL
--Specify top level EmployeeID for direct reports
DECLARE @TopEmp as int
SET @TopEmp = 109;
--Names and departments for direct reports to
--EmployeeID = @TopEmp; calculate employee name
WITH Empcte(empid, empname, mgrid, dName, lvl)
AS
(
-- Anchor row
SELECT e.EmployeeID,
REPLACE(c.FirstName + ' ' + ISNULL(c.MiddleName, '') +
' ' + c.LastName, ' ', ' ') 'Employee name',
e.ManagerID, dn.Name, 0
FROM Person.Contact c
JOIN HumanResources.Employee e
ON e.ContactID = c.ContactID
JOIN HumanResources.EmployeeDepartmentHistory d
ON d.EmployeeID = e.EmployeeID
JOIN HumanResources.Department dn
ON dn.DepartmentID = d.DepartmentID
WHERE e.EmployeeID = @TopEmp
UNION ALL
-- Recursive rows
SELECT e.EmployeeID,
REPLACE(c.FirstName + ' ' + ISNULL(c.MiddleName, '') +
' ' + c.LastName, ' ', ' ') 'Employee name',
e.ManagerID, dn.Name, a.lvl+1
FROM (Person.Contact c
JOIN HumanResources.Employee e
ON e.ContactID = c.ContactID
JOIN HumanResources.EmployeeDepartmentHistory d
ON d.EmployeeID = e.EmployeeID
JOIN HumanResources.Department dn
ON dn.DepartmentID = d.DepartmentID)
JOIN Empcte a
ON e.ManagerID = a.empid)
--Order and display result set from CTE
SELECT *
FROM Empcte
WHERE lvl <= 1
ORDER BY lvl, mgrid, empid
--Alternate statement using MAXRECURSION;
--must position immediately after Empcte to work
SELECT *
FROM Empcte
OPTION (MAXRECURSION 1)
====================================
This is Part 1 (due to the length of input > 50000 characters).
Scott Chang
Invalid Value For Key 'attachdbfilename'.
Nov 8, 2006HI,
We upgraded to SQL Server 2005 Standard Edition for our ASP.NET 2.0 website. We were using SQL Server Express 2005. That worked fine. Now we are unable to connect to the database. I have googled, but I just cann't figure out what is going on. Any help is appreciated. Here is the error.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
In our firewall sqlbrowser.exe and sqlservr.exe are allowed.
Thanks Matt
Invalid Object Name
Sep 27, 2007Ok I'm trying to connect to my easycgi.com MSSQL database.I can connect OK.My ID is in the db_owner group.I can create and edit tables and data.I can open a table and see the data.I can view the SQL statement behind the open table (select * from Table) and execute it successfully.But if I open a new query window and type "select * from [table]" (or any other query), no matter which table it is, I get an error:Msg 208, Level 16, State 1, Line 1Invalid object name '[table name]'.I've searched the web and found this error plenty of times, usually associated with security or the schema. But all my objects are under dbo and I'm in db_owner... ???
View 6 Replies View RelatedInvalid Connection
Jun 19, 2008When trying to connect to a remote SQL 2005 Express Server, I get this error message: [DBNETLIB][ConnectionOpen (ParseConnectParams()).]Invalid connection.
I can remotely connect to the server with the same username and password using osql in command and I can also connect to the server remotely with SQL Server Management Studio installed on this machine.
Here is my connection string:
Provider=SQLOLEDB.1;Password=password;Persist Security Info=True;User ID=uid;Initial Catalog=EBM;Data Source=xxx.xxx.xxx.xxxSQLEXPRESS;Use Encryption for Data=False
The same connection string works if connecting locally, via changing the ip address to the machine name:
Provider=SQLOLEDB.1;Password=password;Persist Security Info=True;User ID=uid;Initial Catalog=EBM;Data Source=machinenameSQLEXPRESS;Use Encryption for Data=False
Any help would be appreciated.
Invalid Column Name
Mar 19, 2004I get a Invalid Column Name ' '. with this procedure. Can anyone see what migh be wrong?
Thanks,
SELECT A.CompanyName,C.FirstName,C.LastName,C.Client_ID,
CASE WHEN A.[CompanyName] IS NULL OR A.[CompanyName] = '' THEN C.[FirstName] +" "+ C.[LastName] ELSE A.[CompanyName] END AS DRName, C.Client_ID
FROM tblClients C INNER JOIN tblClientAddresses A ON C.Client_ID = A.Client_ID
WHERE (C.Client_ID = 15057) AND (A.MailTo=1) AND Convert(varchar(5), GETDATE(), 10) BETWEEN Convert(varchar(5), A.Startdate, 10) AND Convert(varchar(5), A.Enddate, 10) OR (A.Startdate Is Null) AND (A.EndDate Is Null)
GO
Invalid Column Name
Aug 19, 2004Hi the following SP that causes an error.
CREATE PROCEDURE GetInfo
(
@MinPriceint=0,
@MaxPriceint=9999999999,
@TypeHomenvarchar(50)=NULL,
@Locationnvarchar(100)=NULL
)
AS
Declare @strSql nvarchar(255)
Set @strSql="Select * from table WHERE "
Set @strSql=@strSql + 'Price BETWEEN ' + CONVERT(nvarchar(20),@MinPrice) + ' and ' + CONVERT(nvarchar(20),@MaxPrice )
If @TypeHome != "No Preference"
Set @strSql=@strSql + ' and Type = ''' + @TypeHome+ ''''
If @Location != "No Preference"
Set @strSql=@strSql + ' and City = ''' + @Location+ ''''
Set @strSql=@strSql + ' and IDX = ''Y'' ORDER BY Price'
Exec(@strSql)
GO
The Error I get is:
"Error 207: Invalide Column Name 'Select * from table WHERE'
Invalid Column Name 'No Preference'
Invalid Column Name 'No Preference'
I have checked the table and the columns do exist, spelled correctly and caps are all the same. Also, this same SP in another table works just fine.
What is causing this error?
Thanks in advance!
Invalid Connection
Mar 30, 2005Hey everyone, hope you all can help me with this problem.
We have a remotely hosted website, but we have a SQL server in our company (powers our instore portal). I have set up our router so that i can connect to remote desktop and sql server. I can connect to the remote desktop and i can connect to the sql server with query analyzer. On our local site i can set up a connection to look at sqlserver.underpargolfutah.org and it works fine, everything goes well.
Now here is the problem. On the hosted site i have set up the following
web.config >
<appSettings>
<add key="sql_dsn" value="server=************.underpargolfutah.org;database=online;uid=sa;pwd=*******" />
</appSettings>
default.aspx >
Public Class shopDB 'publicly declare typical stuff for connections Public conn As SqlConnection Public cmd As SqlCommand Public reader As SqlDataReader Public dsn As String = ConfigurationSettings.AppSettings("sql_dsn").ToString Public Function getBaseSelectionsByType(ByVal type) 'declare the connection conn = New SqlConnection(dsn) 'declare command cmd = New SqlCommand("SELECT * FROM category", conn) 'open the connection conn.Open() 'grab data reader = cmd.ExecuteReader(CommandBehavior.CloseConnection) Return reader End Function
End Class
This should all work but i get the following error
[SqlException: Invalid connection.] System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) +474 System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) +372 System.Data.SqlClient.SqlConnection.Open() +384 v3.shopDB.shopDB.getBaseSelectionsByType(Object type) in shopDB.vb:21 v3.shop_default.Page_Load(Object sender, EventArgs e) in default.aspx.vb:32 System.Web.UI.Control.OnLoad(EventArgs e) +67 System.Web.UI.Control.LoadRecursive() +35 System.Web.UI.Page.ProcessRequestMain() +742Any ideas? i am stumped.
Thanks in advance-Darren
Invalid Column Name 'x'
Feb 16, 2001Can anyone tell me why I get the above message using the following stored procedure and passing in a value of 120:
CREATE Procedure qryAnalysisCountMain
(@WizardGroup1Question int)
As
EXEC("SELECT QuestionDescription FROM Questions WHERE QuestionCode = " + @WizardGroup1Question)
120 just happens to be the asci value of 'x' and whatever number I pass in gets converted into it's character equivalent and the sp tells me it can't find that column name. QuestionCode is an int field so there is no problem there
The procedure works OK with:
SELECT QuestionDescription FROM Questions WHERE QuestionCode = @WizardGroup1Question
However I need the SQL in an EXEC as the sp will eventually be dynamic so that i can pass in the name of the table to select from.
Thanks
Martin
Invalid Column Name
Mar 30, 2004Hi
I have a dynamic select statement which is showed below.
declare @query varchar(100)
set @query = 'select * from undergraduate where Gender =' + @Gender
exec (@query)
//
When I execute the @query, I get an error message like "Invalid Column Name Male".
I think I need to put a single quotation around the dynamic variable, so that I have
select * from undergraduate where Gender ='Male'. But I am not sure how to do that.
Thank you for your help!!
Type Name Is Invalid
Jan 21, 2006Dear guys
when am executing a stored procedure from asp page it will shows an err like this
"
Microsoft OLE DB Provider for SQL Server error '80040e30'
Type name is invalid
"
but the script and the database is perfectly working in local computer ..
what will be the reason.
regards jini
Invalid Object
Jul 31, 2002When running 'select * from <table> everyone gets 'invalid object' error. When they run 'select * from <database>.<objectowner>.<table> it works fine. This would lead one to believe that they're either not in their default database or that they don't own the objects. However this is not the case.
Why do they need to qualify everything if they're running from their own databaase, they own the object and they're logged in as the objectowner?
This was working fine one day but not the next. They connect using a DSN that's on a web server and they pass their login and password but not their database. I don't have this problem and can't duplicate anyone else's, but I'm not on the web server, I'm going directly to teh SQL server using Query Analyzer.
Any ideas??
Invalid Object Name
Jul 12, 2005I'm connecting to an SQL Server database through a Perl script (using Win32::ODBC). The connection seems to go through fine, as in, I get no errors. But even simple statements like "Select * from AccountTable" dont work. I get the error Invalid Object Name 'AccountTable'. The table exists and I even gave myself explicit permission for "SELECT" statements for that table.
Are there any other permissions that need to be set? The DSN defaults to the database that I need.
Any help would be most appreciated. I'm going mad here.
Thanks.
-Amrita
Invalid Object Name
Feb 2, 2007as i run my code (windows application) i get this error
Invalid object name 'dbo_TASk'.
Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 0, current count = 1.
/****** Object: Stored Procedure dbo.stp_per_task_by_system_sel Script Date: DATE ******/
IF EXISTS (SELECT *
FROM dbo.sysobjects
WHERE id = OBJECT_ID(N'[dbo].[stp_per_task_by_system_sel]')
AND OBJECTPROPERTY(id, N'IsProcedure') = 1)
DROP PROCEDURE [dbo].[stp_per_task_by_system_sel]
GO
CREATE PROCEDURE dbo.stp_per_task_by_system_sel
(
@sys_id int
)
AS
--------------------------------------------------------------------------------
-- Created by : Jacco B
-- Date created : 1-febrauri-2007
--------------------------------------------------------------------------------
-- Description : deze stp haalt de specefieke taken van een geselecteerd systeem uit de database
--------------------------------------------------------------------------------
-- Test string : stp_per_task_by_system_sel 'var'
--------------------------------------------------------------------------------
-- Change Log : Date By Description
-- -------- ------ ------------------------------------
--
--------------------------------------------------------------------------------
BEGIN
SET NOCOUNT ON
--declaratie locale variabelen
DECLARE @error integer,
@object_name varchar(30)
--begin transactie
SELECT @object_name = object_name(@@procid)
BEGIN TRAN @object_name
--begin procedure
SELECT SYSTEM_STANDARD_TASK.*, TASk.*
FROM SYSTEM_STANDARD_TASK INNER JOIN dbo_TASk ON SYSTEM_STANDARD_TASK.tas_id = TASk.tas_id
WHERE SYSTEM_STANDARD_TASK.sys_id = @sys_id
--Errorafhandeling
SELECT @error = @@error
IF @error <> 0
BEGIN
ROLLBACK TRAN @object_name
RETURN @error
END
--commit transactie
COMMIT TRAN @object_name
RETURN 0
END
GO
--grant exec to sql group
GRANT EXECUTE ON [dbo].[stp_per_task_by_system_sel] TO [PERIODIEK_USER]
GO
Invalid Object Name Please Help
Feb 4, 2005When i enter http://akor.alternatifim.com/
i get the error below
Microsoft OLE DB Provider for ODBC Drivers error '80040e37'
[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'tblSARKICIM'.
The SQL statement is so simple like
Select * from tblSARKICIM
However when i change the SQL statement Select * from lyric.tblSARKICIM
lyric is username and owner of the tables.
Problem is solved. I transfer the My SQL Server and then this problem occurs and i don't want change all my SQL statements.
What can i do?
Invalid Handle In MS SQL
Jul 9, 2006Hi All,
We have got a new HP server and SQL is preinstalled, But when we are trying to start SQL, it gives an error "The handle is invalid".
We tried to reinstall the SQL, but , being a server t doesn't allow to do so
Please assist.
regards,
Jatin