Is It Possible That DTS Skipped Indentity Attribut
Sep 11, 2006
I imported a table using DTS.
I run SQL statements in my original server database. It works well.
But when I run the same instructions within a stored procedure in my new workstation where I improrted the table I get this error:
Server: Msg 515, Level 16, State 2, Procedure InsertFichierPrix, Line 11
Cannot insert the value NULL into column 'Id', table 'myDBLive.dbo.FichierPrix'; column does not allow nulls. INSERT fails.
The statement has been terminated.
Here is the SQL statements that I run on the original Database:
insert into fichierprix(nomfichier, version, descriptionfr, typeclient,....) values(@NomFichier,'Actuelle', @NomFourFr, 'MembreAcheteur', ....)
And here is my SP that I run on the new imported database:
CREATE PROCEDURE InsertFichierPrix @NomFichier varchar(50), @NomFr varchar(50),@NomAn varchar(50)
AS
Hi All, Suppose I have created one table say "Customer" Customer (cust_no, cust_name,cust_address) I want to change the attribute name "cust_no" to "cust_number". How to do it using ALTER command. Pls give me the exact syntax for this.
One of my application i am using is very slow,(SQL 2005 backend).I am trying to find out the tables and add index to it.But this time my profiler is skipping the records(Trace Skipped Records).Is there any settings?,so that it shows up all the records.
Note: i dont have the code of the application,but i can find few tables holding 2-3 millions of records.I want to know the column name,to create index.
Can someone please help in in understanding what I have done wrong. My company is using Backup Exec 7.3 as it's back up application. I have built a server, installed SQL, Built an database and added logins. I am backing up my database and Transact Log Files to specific folders on my partioned drive. Why when I run the backup ups, It backs up everything EXCEPT for my SQL folders. It seems to Skipp all SQL Folders. Please Help, I need to have this funtion working properly. What have I done wrong or what do I need to do to make this stop. Does this perhaps have something to dwil Here is an example of the backup Message in Backup Exec that I am recieving:
Media Name: "DIFF" Backup of "FEPTESTE$ " Backup set #41 on storage media #1 Backup set description: "Daily 6" Backup Type: DIFFERENTIAL - Changed Files Backup started on 6/28/02 at 12:36:21 AM. The item Microsoft SQL ServerDataMSSQLDataTESTDB_Data.MDF in use - skipped. The item Microsoft SQL ServerDataMSSQLDatamaster.mdf in use - skipped. The item Microsoft SQL ServerDataMSSQLDatamastlog.ldf in use - skipped. The item Microsoft SQL ServerDataMSSQLDatamodel.mdf in use - skipped. The item Microsoft SQL ServerDataMSSQLDatamodellog.ldf in use - skipped. The item Microsoft SQL ServerDataMSSQLDatamsdbdata.mdf in use - skipped. The item Microsoft SQL ServerDataMSSQLDatamsdblog.ldf in use - skipped. The item Microsoft SQL ServerDataMSSQLDataorthwnd.ldf in use - skipped. The item Microsoft SQL ServerDataMSSQLDataorthwnd.mdf in use - skipped. The item Microsoft SQL ServerDataMSSQLDatapubs.mdf in use - skipped. The item Microsoft SQL ServerDataMSSQLDatapubs_log.ldf in use - skipped. The item Microsoft SQL ServerDataMSSQLDataempdb.mdf in use - skipped. The item Microsoft SQL ServerDataMSSQLDataemplog.ldf in use - skipped. The item Microsoft SQL ServerDataMSSQLLOGTEST_Log.LDF in use - skipped.
Backup completed on 6/28/02 at 12:37:11 AM. Backed up 48 files in 24 directories. 14 items were skipped. Processed 23,876,604 bytes in 50 seconds. Throughput rate: 27.3 MB/min
I have a serious issue with transferring binary(8) data from SQL Server 2008 R2 to Excel 2010.
A standard query is made in Excel (Data -> From Other Sources -> From SQL Server) and it works... almost perfect.Almost, because in the query result I have almost all columns in destination spreadsheet, except of those columns which are binary(8) format in my table in SQL Server.
So, in SQL there are columns - let's say:
Date Start time End time User ID (as binary(8) format) Memo (as string) ...
After Excel's query is done, in Excel there are only columns:
Date Start time End time Memo (as string) ...
All columns with types = binary(8) are skipped.
I tried:
1. Export from SQL Server to CSV file and then from CSV file to Excel (all columns as string) and it works, but it has to be automated so CSV is not a good idea.
2. Adding to ConnectionString additional parameters NO_BINARY_RESULT=1 - does not work.
3. Adding to ConnectionString additional parameter IMEX=1 - does not work.
We've set up transactional replication to continue on data consistency errors and we do see in the replication monitor that records are skipped at the subscriber. Our subscriber is SQL2K and our publisher is SQL2K5. How can we see the records that were skipped and why they were skipped.
Hi There,I am having a strange problem with my identity column...... 1). I have a table of Products that have an identity column auto-incremented by 1. 2). I have my asp program working quite well in which the Data entry operators are adding the products into my database..... and they do not have any interface through which they can delete products........ 3). My Database is running at Web server(MS SQL Server)My problem is that when i cehcked my database.... there were around 1000 records but the auto increment number have reached to 1500. and when i checked in details then i saw that Auto number column is being skipped certain numbers..... like one entry is 1478 then the next one comes to be 1482..... and 1508 to 1516........ Its happening alot of times and it seems that SQL Server is skipping some numbers............Since it is Auto-Number so i do not have control over it through my code.... So i think the coding might not be the problem...... I have set Identity seed as well as Identity Increment both to 1.Is there any thing that you can suggest me to do??(Thanx)
I tried to load a fixed width flat file with around 300,000 rows. However, only the first 8xxxx rows were loaded to the destineation table and the rest row were loading blank records. There was no error message showing during package execution. I've tried to split the file in half and the result was the same. So it wasn't the data file problem.
Would there be any buffering issue I need to cater for inside the package? Thanks!
I am copying the template with header before loading the data. I tried deleting Dataflow task, Excel Connection manager etc., nothing seems to work and there are no nulls in the data. I did this several times, workaround seems to not working this time.
I need to populate a table having an identity field with data (basically I want to make a copy of a table with identity column on another server). When I use BCP to insert data then the values in the identity field is not the same as in the data file but gets incremented from the original.
eg. if the records in the flat file are- 1, 'test1' 2, 'test2'
Now if i insert this into the table (say the last identity value was 100) then rows get inserted as- 101, 'test1' 102, 'test2'
Is there any way by which I can retain the values of the identity column to be same as in the file?
SET IDENTITY_INSERT tss_Cable ON go DECLARE @@nextidentval int SELECT @@nextidentval = MIN(IDENTITYCOL) + IDENT_INCR(tss_Cable) FROM tss_Cable t1 WHERE IDENTITYCOL BETWEEN IDENT_SEED(tss_Cable) AND 2147483646 AND NOT EXISTS (SELECT * FROM tss_Cable t2 WHERE t2.IDENTITYCOL = t1.IDENTITYCOL IDENT_INCR(tss_Cable)) go SET IDENTITY_INSERT tss_Cable OFF
I get the following error.
error line 2 Incorrect syntax near IDENT_INCR. error line 6 incorrent syntax near IDENT_INCR.
I would like to reset the identity without droping the table. I'm using sql 6.5. I looked at Mark Lessard 12/17/99 respose on this issue and changed the code to match his version but the same error occured.
How do reset identity seed on table, for example I have table that has gap in the identity such as (1,2,3,5,6, etc..) and I want reset the entire table.
I'm doing a data transfer from Access to SQL Server, I wish to keep theidentity column (autonumber) values as all the data is already related. Itried the first table append query including the identity column, it worked.Was this fluke? Will it always work? I was under the impression that I wouldhave to issue a "set identity_insert on" before doing this. The SQL databasewill have absolutely no data before the transfer routines are run.
SqlCeConnection tempConn = dbman.getConn(); SqlCeCommand tempComm = new SqlCeCommand(str_sql_insert, tempConn); tempConn.Open(); Object ob = tempComm.ExecuteScalar();
.....
When I run the application there is a error report on the last line of the code above: [ Token line number = 1,Token line offset = 127,Token in error = SELECT ]
When I copy the SQL string into the QueryBuilder in the VS2008 it is works and returned a correct value.
I want to know is there something wrong with the sql string or the ExecuteScalar() cant execute 2 steps command?
I'm sure the problem is largely due to the fact that I am close to completely clueless on such things, but a bit of timely advice from the sage sql wizards here would be most welcome and greatly appreciated.
I am using the following INSERT statement to add a new record in my table. I want to be able to get the Autonumber UserID field of the newly created record but I am getting the following error: "Characters found after end of SQL statement" Code:
INSERT INTO tblUser (LoginName, UserPassword, EmailAddress, City) Values (@User, @UsrPassword, @EmailAddress, @City); SELECT @@IDENTITY As 'Identity'
What is wrong in my statement? How do I retrieve the Autonumber field of the newly created record? How do I handle if the LoginName and/or EmailAddress already exists?
I want to be able save this INSERT statement as an Access Query and call it from my C# code.
How do I alter column/field from type int (with Identity = Yes Not For Replication) to just normail int field. No more identity. I want it to be done using SQL script( sql query analyzer).
Hi,When i eg. manually ad entries to a table and, cancels the insert Ms SQLincrement the counter on the ID anyway. Is there a way to avoid thisbehavior?RegardsAnders
Hi AllI have a table in SQL Server with ID having indentity inrement by one.Table has not any trigger. Frequently ID in the table jumps.Any help !!!Thanks
I am trying to remove the Indentity property from a column so I can do some clean up. Then will need to add it back. Adding Indentity property back is not a problem, but cant figure out how to remove it in the first place.
I have a table with an indentity column as first column. At beginning it is continue such as 0-50. I delete last 20 columns by hand. The 0-31 is left. When the new data is inserted, I hope the new indentity column begin from 32. How to do that? Now the indentity column begin from 51 as the new data is inserted.
Can anyone tell me how an identity column decides what number to give which row.
I always thought that it was in order of the clustered index.
But i have found the following:
If you have Table A with a clustered index(not unique) say on the first 3 columns.
If the table is empty and you add an identity column, then afterward load it with data the value of the identity column seems to match the clustered index.
But if the table has no identity column and it is filled with data, and then you add an identity column the number for the identity column seems to be all over the place.
So basically how does a newly added identity column know what number to give each row, what if the clustered index is not unique? Is it random ?
I am using sql server 2005. I stuck out in a strange problem. I am using view in my stored procedure, when I run the stored procedure some of the rows get skipped out means if select query have to return 10 rows then it is returning 5 rows or any other but not all, also the records displyaing is randomly coming, some time it is displaying reords 12345 next time 5678, other time 2468.
But if I run seperately the querys written in SP then it returns all the rows. Please give me solution why it is happening like this.
There are indexes in the tables.
Once I shrink the database and rebuild the indexes, from then this problem is happening. I have rebuild the indexes several time, also updated the statistics but nothing improving.
"tempdb is skipped. You cannot run a query that requires tempdb"?
We're running a .Net web application with a SQL Server 2000 backend, and we get the error intermittently. Restarting the SQL Server service seems to fix it, as it causes tempdb to be rebuilt, but this isn't a long term solution. Any direction or hints would be greatly appreciated. Thanks! - Mike