Is This Case Statement Correct?
Nov 16, 2007
CASE When FundName Is Null Then ShortName
When pf.FundId = 0 Then FundName = Loans
ELSE FundName END as FundNames,
Regards
Karen
ADVERTISEMENT
CASE Does Not Give Correct Result
Aug 31, 2007How do I automatically assign a new cardcode-number? (according to the following formula: highest existing number + 1)
Scenario:
-There are two types of business partners: Customers and Suppliers.
-Customers have the value 'C' in the colomn CardType.
-Suppliers have the value 'S' in the colomn CardType.
-Customers have the following syntax 'C123456' in the colomn CardCode.
-Suppliers have the following syntax 'S123456' in the colomn CardCode.
-Existing CardCode-values in the DB for the Customers: C000001 - C100599.
-Existing CardCode-values in the DB for the Suppliers: S000001 - S200199.
The idea is that when a user creates a new business partner, the CardCode should be automatically filled when a new assigned number (highest existing number + 1), according to the value that is selected in CardType (either the letter 'C' or 'S').
What's been done so far:
SELECT top 1
(CASE
WHEN CardType='C' THEN (SELECT top 1 'C' + '' + cast((substring(T0.CardCode, 2, 7) + 1) as varchar) as [nummer]
FROM OCRD T0
WHERE T0. CardCode like 'C%' AND T0. CardType='C'
order BY T0.CardCode desc FOR BROWSE)
WHEN CardType='S' THEN (SELECT top 1 'S' + '' + cast((substring(T0.CardCode, 2, 7) + 1) as varchar) as [nummer]
FROM OCRD T0
WHERE T0. CardCode like 'S%' AND T0. CardType='S'
order BY T0.CardCode desc FOR BROWSE)
END)
FROM OCRD T0
The current result:
The result that it gives is 'C100600'.
The problem however is that it always gives this result and does not take into account what has been selected in CardType.
When I add the following: "order BY T0.CardCode desc FOR BROWSE" it gives the result 'S200200'.
So, what does work is that it takes the highest existing value and adds 1. But what doesn't work is the taking account what value is selected in CardType.
Does anyone know how I can make this work?
Correct/detect Improper Case
May 22, 2008I have been through our database and we have a culprit who has been inputting all names in full capitals which I have always found particularly annoying. I want to convert them all to proper case for which I found the code below. However how can I detect the set where they have inproper case.
CREATE FUNCTION dbo.pCase
(
@strIn VARCHAR(255)
)
RETURNS VARCHAR(255)
AS
BEGIN
IF @strIn IS NULL
RETURN NULL
DECLARE
@strOut VARCHAR(255),
@i INT,
@Up BIT,
@c VARCHAR(2)
SELECT
@strOut = '',
@i = 0,
@Up = 1
WHILE @i <= DATALENGTH(@strIn)
BEGIN
SET @c = SUBSTRING(@strIn,@i,1)
IF @c IN (' ','-','''')
BEGIN
SET @strOut = @strOut + @c
SET @Up = 1
END
ELSE
BEGIN
IF @up = 1
SET @c = UPPER(@c)
ELSE
SET @c = LOWER(@c)
SET @strOut = @strOut + @c
SET @Up = 0
END
SET @i = @i + 1
END
RETURN @strOut
END
GO
Problem Using Result From CASE In Another CASE Statement
Nov 5, 2007I have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE
[logic for condition 1]
THEN 'Condition 1 text'
WHEN [logic for condition 2]
THEN 'Condition 2 text'
WHEN [logic for condition 3]
THEN 'Condition 3 text'
WHEN [logic for condition 4]
THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block
...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
Thanks,
Jason
SYNTAX Help, Correct Way To Use LIKE In Statement
Feb 27, 2007Hi, I'm new to SQL and was wondering if there was an easier way to filter data.
I have two tables -
The first table called Names of Companies has a column named: NAMES
NAMES
XYZ Company
ABC Limited Liability Company
ZZZ Corporation
KKK Inc.
ABC Inc.
The second table called Keywords has a column named: WORDS
WORDS
Company
Limited
I want to search for all NAMES that contain the WORDS in some form
The results should be:
NAMES
XYZ Company
ABC Limited Liability Company
Technically, I can get the results I want by manually typing into the SQL statement all the words that appear in the WORDS column.
SELECT *
FROM [Names of Companies]
WHERE [Names of Companies].Names Like "*Company*" Or ([Names of Companies].Names) Like "*limited*"));
But is there a way that I reference the table Keyword instead of typing into the query statement all the words that appear in the column WORD? I have a lot of words to search for.
Can anyone recommend a better way to do this?
Thanks for all your help!
If Statement To Correct Divide By Zero
May 2, 2007I have this statement, sometimes the Dominator can be zero so i tried this if statement but the error i'm getting is:
An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference.(42000,147)
This is the query i'm using:
SELECT DBO.THIT_RATIO_DETL.F_DIVISION_NO,
Sum(Case When dbo.THIT_RATIO_DETL.STATUS_CD ="B" OR dbo.THIT_RATIO_DETL.STATUS_CD="K" THEN 1 ELSE 0 END) AS BOUND,
Sum(CASE WHEN dbo.THIT_RATIO_DETL.STATUS_CD = "B" or dbo.THIT_RATIO_DETL.STATUS_CD ="Q" or dbo.THIT_RATIO_DETL.STATUS_CD ="L" or dbo.THIT_RATIO_DETL.STATUS_CD ="K" THEN 1 ELSE 0 END) as QUOTE,
Sum(Case When dbo.THIT_RATIO_DETL.STATUS_CD ="B" OR dbo.THIT_RATIO_DETL.STATUS_CD="K" THEN 1 ELSE 0 END)*1.0 / If(Sum(CASE WHEN dbo.THIT_RATIO_DETL.STATUS_CD = "B" or dbo.THIT_RATIO_DETL.STATUS_CD ="Q" or dbo.THIT_RATIO_DETL.STATUS_CD ="L" or dbo.THIT_RATIO_DETL.STATUS_CD ="K" THEN 1 ELSE 0 END)= 0 Then 1 else Sum(CASE WHEN dbo.THIT_RATIO_DETL.STATUS_CD = "B" or dbo.THIT_RATIO_DETL.STATUS_CD ="Q" or dbo.THIT_RATIO_DETL.STATUS_CD ="L" or dbo.THIT_RATIO_DETL.STATUS_CD ="K" THEN 1 ELSE 0 END)) as HIT_RATIO
FROM dbo.THIT_RATIO_DETL
Group by dbo.thit_ratio_detl.F_DIVISION_NO
Not sure if in SQL server i can correct the problem like that, any help is greatly appriciated...
Correct SQL Statement For URL Variable Display?
Apr 6, 2007I have a page that is displaying different movie covers. They each have their respective genres stored in several keys (genre0, genre1, genre2). Now I can search within the movies by changing the url variable movies.aspx?genre=action but if I simply go to movies.aspx, I'm wanting all genres to appear. But for me, the page is blank if I don't specify the genre. So I've had to start filling in the genre All for all movies so I can go to movies.aspx?genre=all but I know this can't be necessary. Is it my SQL statement for the datasource causing the problem? Code is in VB. <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="Data Source=xxx;Initial Catalog=xxx;User ID=xxx;Password=xxx"
ProviderName="System.Data.SqlClient" SelectCommand="SELECT * FROM [Movies] WHERE [genre0] = @strGenre OR [genre1] = @strGenre OR [genre2] = @strGenre">
<SelectParameters>
<asp:QueryStringParameter Name="strGenre" QueryStringField="genre" />
</SelectParameters>
</asp:SqlDataSource>
<asp:DataList ID="DataList1" runat="server" DataKeyField="movieID" DataSourceID="SqlDataSource1" RepeatColumns="5" RepeatDirection="Horizontal" CellPadding="5" BorderStyle="None" BorderWidth="0px">
<ItemTemplate>
<asp:HyperLink ID="HyperLink1" runat="server" NavigateUrl='<%# "movie.aspx?id=" & Eval("movieID") %>'>
<asp:Image ID="Image1" runat="server" ImageUrl='<%# Eval("imageURL", "{0}") %>' BorderStyle="None" /><br />
</asp:HyperLink>
</ItemTemplate>
</asp:DataList>
SQL Server 2012 :: Update Statement With CASE Statement?
Aug 13, 2014i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END
What is the best way to script this
How To Write Select Statement Inside CASE Statement ?
Jul 4, 2006Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
Transact SQL :: Update Statement In Select Case Statement
May 5, 2015I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
Can You Please Correct My Syntax For If Statement In Stored Proc
Nov 23, 2004I am using @strsql to construct the where condition for a select query.
Can you please correct my syntax.
DECLARE @strsql nvarchar(2000)
IF @ProgNO <> '' then
strsql = WHERE ProgNO = @ProgNO
end if
If @ProjNO <> '' then
if strsql <> '' then
strsql = strsql & " and ProjNO =@ProjNO
ELSE
strsql = wHERE ProjNO =@ProjNO
END IF
END IF
Thank you very much.
Case Statement Error In An Insert Statement
May 26, 2006Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
How To Show Records Using Sql Case Statement Or If Else Statement
Feb 20, 2008i want to display records as per if else condition in ms sql query,for this i have used tables ,queries as follows
as per data in MS Sql
my tables are as follows
1)material
fields are -- material_id,project_type,project_id,qty, --
2)AB_Corporate_project
fields are-- ab_crp_id,custname,contract_no,field_no
3)Other_project
fields are -- other_proj_id,other_custname,po
for ex :
vales in table's are
AB_Corporate_project
=====================
ab_crp_id custname contract_no field_no
1 abc 234 66
2 xyz 33 20
Other_project
============
other_proj_id other_custname po
1 xxcx 111
2 dsd 222
material
=========
material_id project_type project_id qty
1 AB Corporate 1 3
2 Other Project 2 7
i have taken AB Corporate for AB_Corporate_project ,Other Project for Other_project
sample query i write :--
select m.material_id ,m.project_type,m.project_id,m.qty,ab.ab_crp_id,
ab.custname ,op.other_proj_id,op.other_custname,op. po
case if m.project_type = 'AB Corporate' then
select * from AB_Corporate_project where ab.ab_crp_id = m.project_id
else if m.project_type = 'Other Project' then
select * from Other_project where op.other_proj_id=m.project_id
end
from material m,AB_Corporate_project ab,Other_project op
but this query not work,also it gives errors
i want sql query to show data as follows
material_id project_type project_id custname other_custname qty
1 AB Corporate 1 abc -- 3
2 Other Project 2 -- dsd 7
so plz help me how can i write sql query for to show the output
plz send a sql query
Transact SQL :: UPDATE Statement - Returns Correct Results When Running Separately
May 1, 2015SQL Ver: 2008 (not r2)
Problem: The following code returns correct results when moving variable declarations and update statement outside a stored procedure, but fails to return a value other than zero for the "COMPANY TOTAL" records. The "DEPT TOTAL" result works fine both in and outside the sp.This may have to do with handling NULL values since I was getting warning message earlier involving a value being eliminated by an aggregate function involving a NULL. I only got this message when running inside the sp, not when running standalone. I wrapped the values inside the SUM functions with an ISNULL, and now return a zero rather than NULL for the "COMPANY TOTAL" records when running inside SP.All variable values are correct when running.
SQL CODE:
DECLARE
@WIPMonthCurrent date = (SELECT TOP 1 WIPMonth FROM budxcWIPMonths WHERE ActiveWIPPeriod = 'Y')
select @WIPMonthCurrent as WIPMonthCurrent
[code]....
Case Statement In Sql Help
Jan 18, 2008I am trying to use a case statement in one of my stored proc but I am stuck a little bit.Here is a example, something like:declare @id int set @id =1case @id When 1 then select * from contactsend case but this keeps on giving me error: Incorrect syntax near the keyword 'case'. Any help is appreciated!
View 7 Replies View RelatedCase Statement
Apr 22, 2008Hi I have some question regarding the sql case statment.Can i use the case statement with the where clause.Example: SELECT FirstName, IDFROM myTablewhere case when ID= '123' then id = '123' and id='124' endorder by idBut the above code does not work.
View 9 Replies View RelatedSql Case Statement Help
Jun 2, 2005Hi all,
I was wondering if there is any way in an sql statement to check whether the data your trying to get out of the DB is of a particular type, ie. Int, char etc. I was thinking about a case statement such as
<code>
CASE WHEN (MyNum <> INT) then 0 end AS MyNum
</code>
This has to be included in the sql statement cause I need this field to get other data.
Any thoughts on how to achieve this would be greatly appreciated.
If I’m in the wrong thread section please advise of best one to get help in.
What Is The Best SQL Statement For This Case ?
Sep 17, 2005Hi !!!i hope one of the sql specialists answer me about the best and most effeceint way to acheive what i am looking for Scenario:-------------i have a 3 tables related to each other Addresses, Groups and GroupAddressthe relation is for both addresses and groups is one to many in the GroupAddress.the behaviour in the application : user can add addresses to his address list and from the address list a user can add an address to many groups like if you have Group name "Freinds" and you add me in it and you have Football team group and you add me to it like that !!!not i have another function called "copy group"in the GroupAddress i have this data as example GroupID AddressID1 41 61 21 441 72 82 62 93 133 73 10and the group ID called "Freinds"i want to copy the group so i can have another group that has the same addresses by one click rather than collectiong them again one by one ...by the way the new copy will have a new group name ( as this is thebusiness logic so user can not have dupicate group name )so what is the best SQL statement that i need to copy the group ???i hope that clear enough!
View 2 Replies View RelatedCASE Statement
Jan 23, 2002I am trying determine if I can do something like the code below. I have done a left join on a table. In the select statement there are three possible values. Yes, No, or NULL. I could like to use a Case statement to determine if there is Null. If so, then output N/A in place of the Null. So then my possible valus are Yes, No, and N/A.
Any clues?
Thanks,
John
SELECT TOP 100
OfferDressRoomYN.yesno as OfferDressRoom
= CASE
WHEN offerDressRoomYN.yesno IS NULL THEN 'N/A'
END,
FROM dataquestionnaire dq
LEFT OUTER JOIN yesno OfferDressRoomYN ON dq.c3_1 = OfferDressRoomYN.yesnoid
Case Statement
Aug 27, 2001Hi
Can anybody tell me how to execute store procedure in the case statement.
Thanks
Case Statement
Sep 23, 2002How do l use the case statement to cater for these updates.
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = ('AB')
WHERE AB_CLIENT = 1
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = Entity + '' + ' | SB'
WHERE SB_CLIENT = 1
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = 'SB'
WHERE SB_CLIENT = 1 And entity is null
COMMIT
go
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = Entity + '' + (' | CI')
WHERE CI_CLIENT = 1
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = 'CI'
WHERE CI_CLIENT = 1 And entity is null
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = Entity + '' + (' | GEMS')
WHERE GEMS_CLIENT = 1
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = 'GEMS'
WHERE GEMS_CLIENT = 1 And entity is null
COMMIT
GO
IF Else Within A Case Statement
Feb 14, 2006In my query below i have the results ,The thing to observe in the result set it for the name "Acevedo" , "Abeyta" its not doing a group by and populating the results in the following column.Rather its addind a new row and adding it as 1 in the next row.
I have to populate the counts in one row for common names.Shall i use a if condition within a case block.If yes how?any other work arounds would be appriciated.
Please help
Thanks
select
isnull(replace(Ltrim(Rtrim(P.Lastname)),',',''),'' ) Lastname
, case ProductID
WHEN 22 then count(S.Product)
Else 0
END AS Builders
, case ProductID
WHEN 23 then count(S.Product)
Else 0
END AS Associates
, case ProductID
WHEN 24 then count(S.Product)
Else 0
END AS Affiliates
FROM vwpersons p with (nolock)
join vwSubscriptions S with (nolock)
on S.RecipientID = P.ID
where P.Lastname in (select Ltrim(Rtrim(H.name)) from externaldata.dbo.Hispanicnames H)
group by P.Lastname, S.ProductID
having count(P.LastName)>=1
order by 1
Result set :
Firstname Builders AssociatesAffiliates
Abarca 010
Abascal200
Abelar 100
Abeyta100
Abeyta010
Abreu 100
Abreu 010
Acevedo100
Acevedo050
AVG(CASE) Statement - Help Please
Aug 20, 2007I am trying to get avg score by site, by call type. Columns are Site(varchar), Calltype(varchar), totalscore(float). Calltypes are A, B, C, D. Sites are 1, 2, 3, 4. I can do a straight average statement and only get one calltype.
I want to do a CASE statement to get all average scores for all calltypes.
Select Site, avg(totalscore) as [Avg Score]
FROM DB
WHERE calltype = 'A'
GROUP BY Site
Results
Site Avg Score (for A)
1 85
2 75.5
3 85.33
SELECT Site, AVG(CASE WHEN TotalScore > 0 AND CallType = 'A' THEN Totalscore
ELSE 0 END) AS [Avg Score For A]
FROM DB
GROUP BY Site
Results
Site Avg Score For A
1 i get 8.5
2 i get 37.75
3 i get 36.57
Why am I getting a difference?
Any help is greatly appreciated - thank you
SQL CASE Statement
Aug 18, 2004Hi Ive got a simple query where I want to calculate an average of one number divided by the other ie: avg(x / y)
Im trying to use a case statement to return 0 in the event that y is 0, to avoid a division by zero error. My query is still returning a division by zero error anyway can anybody help?
SELECT CCode, CASE WHEN BS_TOTAL_ASSETS = 0 THEN 0 ELSE AVG(BSCLTradeCreditors / BS_TOTAL_ASSETS) END AS myaverage
FROM [Company/Year]
GROUP BY CCode, BS_TOTAL_ASSETS
Thanks
Case Statement
Apr 11, 2008i ahve one fucniton:
create function fntotalcountcustclas
( @campaign varchar(50), @startdate datetime, @enddate datetime)
RETURNS TABLE
AS
RETURN
( Select t.itemnmbr,t.custclas, t.custclasdescription, t.totalcustclas as totalcount
from
(
select
vi.itemnmbr, replace(vc.custclas,'','Unspecified') as custclas, vc.custclasdescription, count(vc.custclas) as totalcustclas
from vwcustnmbr vc
join vwitemnbmr vi
on vi.sopnumbe=vc.sopnumbe
Where vi.Campaign = @Campaign and (vc.docdate between @startdate and @enddate)
group by vi.itemnmbr,vc.custclas, vc.custclasdescription
) as t
)
when i m executing it:
select * from fntotalcountcustclas('copd','1/1/2008','4/11/2008')
order by totalcount desc
i m getting results like:
itemnmbr,custclas,custclasdescription,totalcount
------------------------------------------------
06-5841 STANDARD Standard(web) 31
06-5840 STANDARD Standard(web) 30
kr-014 STANDARD Standard(web) 72
06-5841 INDPATIENT Patient 12
06-5840 INDPATIENT Patient 9
06-5845 INDPATIENT Patient 6
06-5841 PROGRAM Program 6
06-5841 INST-HOSPITAL Hospital 11
...................
Basically, i ahve to use one condition to get corrrect output related to inputs:
like - i have to input @category varchar(50), @category_value varchar(50)
and if category = 'campaign' then category_value = ''
then output should be itemnmbr sum(totalcount) [whatever should be custclas or custclasdesscription]
itemnmbr sumcount
-----------------
06-5840 52
06-541 101
06-452 26
kr-045 252
and if categroy = 'item' then category_value = any itemnmbrs(06-5840,06-5845,06-5841 etc..)
then output should be
itemnmbr custclas custclasdescription totalcount
-----------------------------------------------------
06-5840 STANDARD Standard(web) 31
06-5840 INDPATIENT Patient 9
06-5840 PROGRAM Program 6
06-5840 INS-HOSPITAL Hospital 17
like that..
can anyone help me to write case statement.
thanks a lot!!
create function fntotalcountcustclas
( @campaign varchar(50), @startdate datetime, @enddate datetime,
@category varchar(50), @category_value varchar(50))
RETURNS TABLE
AS
RETURN
( Select t.itemnmbr,t.custclas, t.custclasdescription, t.totalcustclas as totalcount,
case when category
from
(
select
vi.itemnmbr, replace(vc.custclas,'','Unspecified') as custclas, vc.custclasdescription, count(vc.custclas) as totalcustclas
from vwcustnmbr vc
join vwitemnbmr vi
on vi.sopnumbe=vc.sopnumbe
Where vi.Campaign = @Campaign and (vc.docdate between @startdate and @enddate)
group by vi.itemnmbr,vc.custclas, vc.custclasdescription
) as t
)
Case Statement
May 5, 2008Im running the following sql statement but I dont see the
expected output. There are few differences between acc & cl1, mcc & cl2 , ncr & cl3 but I dont see either 'ONE' or 'TWO' or 'THREE'.
There is even a case where cl3 is null but the sql is not filling in either one or two or three. Query simply returns id & rest as null values.
SELECT P1.id,
CASE
WHEN p1.acc!= p1.cl1 then 'ONE'
WHEN p1.mcc!= p1.cl2 then 'TWO'
when p1.ncr!= p1.cl3 then 'THREE'
Else NULL END
As NOnMatchingColumn
from
(select id, acc, cl1,mcc,cl2,ncr,cl3 from dbo.ml)P1
Help With Case Statement
Jun 6, 2008I'm not sure if I am doing this the right way. In my table I have project ids. Each project id has several activities associated with it. Each project has a starting balance. Each activity posts an expense to the total balance of the project. If the project has enough money to handle the charges made by the activities, all the activity expenses can be "posted". If there isn't enough money, I want to loop through the activities, check to see if there is enough of a balance to "post" the first one, If there is, then I want to re-adjust the balance and check the second activity. I want to scroll through each project/activity to see what can be "posted". Here is what I have so far, but I cannot work out how to change the total balance amount. Hopefully what I am trying to do makes sense!
declare @testId nchar(6)
declare @RowNum int
declare @newBalance int
select top 1 @testId=projID from #ProjIds
set @RowNum = 0
WHILE @RowNum <= (Select Max(temp_id) from #ProjIds)
BEGIN
set @RowNum = @RowNum + 1
set @newBalance = (select top 1 Bal_2300
from #RevRecData
where @testId=projId
order by projID, activity)
select projId, activity, postCr, Bal_2300,
'New_Status' = Case when (postCr <= Bal_2300) then 'Can Clear' else 'Still Check' END,
'New_Balance' = Case when (postCr <= @newBalance) then (@newBalance - postCr) else @newBalance End
from #RevRecData
where @testId=projId
order by projID, activity
select top 1 @testId=projId from #ProjIds
where projId > @testID
END
Need Help Using Case Statement
Jun 7, 2008I've these following table
SEL
Date_Taken | Main_ID | Time | Daily_Rainfall
---------------------------------------------------
...
...
...
4/3/2005 | 202 | 1015 | 2
4/3/2005 | 202 | 1045 | 2
4/3/2005 | 202 | 1215 | 7
4/3/2005 | 203 | 715 | 2
4/3/2005 | 203 | 1345 | 2
4/3/2005 | 203 | 1530 | 7
...
...
...
5/29/2005 | 203 | 1100 | 56
5/29/2005 | 203 | 1130 | 156
5/29/2005 | 203 | 1145 | 256
...
...
...
Station_Info
State | Main_ID
--------------------
SEL | 202
SEL | 203
SEL | 204
SEL | 205
SEL | 209
Main_ID | Month_Year | 3MthCumRf | 6MthCumRf | 9MthCumRf | 12MthCumRf
------------------------------------------------------------------------------
202| 4/30/2005 | 525.8 | 683.11 | 356.33 | 754.33
203| 4/30/2005 | 435.5 | 400.9 | 290.34 | 234.34
204| 4/30/2005 | 265.53 | 453.21 | 543.66 | 753.24
205| 4/30/2005 | 251.38 | 754.33 | 478.34 | 785.22
209| 4/30/2005 | 259.5 | 356.34 | 894.33 | 354.78
202| 5/30/2005 | 565.8 | 383.11 | 756.33 | 254.33
203| 5/30/2005 | 485.5 | 444.9 | 744.34 | 755.34
This query only display Max(Daily_Rainfall) per day from SEL
SELECT t1.MAIN_ID,t1.DATE_TAKEN,t1.TIME,
t1.DAILY_RAINFALL,
CASE WHEN DATEDIFF(mm,t1.DATE_TAKEN,GETDATE()) <=3
THEN t3.[3MthCumRf]
WHEN DATEDIFF(mm,t1.DATE_TAKEN,GETDATE()) <=6
THEN t3.[6MthCumRf]
WHEN DATEDIFF(mm,t1.DATE_TAKEN,GETDATE()) <=9
THEN t3.[9MthCumRf]
WHEN DATEDIFF(mm,t1.DATE_TAKEN,GETDATE()) <=12
THEN t3.[12MthCumRf]
END AS CumRf
FROM
(SELECT ROW_NUMBER() OVER(PARTITION BY DATE_TAKEN,MAIN_ID
ORDER BY DAILY_RAINFALL DESC) AS RowNo,* FROM dbo.SEL)t1
INNER JOIN dbo.STATION_INFO t2 ON t2.MAIN_ID=t1.MAIN_ID AND
t1.RowNo=1 INNER JOIN dbo.LT t3 ON t3.STATION_ID =t2.STATION_ID
AND t1.DATE_TAKEN>=CONVERT(VARCHAR(10),DATEADD(m,-3,GETDATE()),101)
ANDt1.DATE_TAKEN<CONVERT(VARCHAR(10), GETDATE(), 101)
WHERE t2.STATE='SEL'
ORDER BY MAIN_ID,DATE_TAKEN,TIME
In my query, i still can query if last3month using CASE WHEN DATEDIFF(mm,t1.DATE_TAKEN,GETDATE()) <=3 THEN t3.[3MthCumRf]
How to adjust my CASE statement
if Main_ID=203, Date_Taken=5/5/2005,
i should pickup following rows
Main_ID | Month_Year | 3MthCumRf | 6MthCumRf | 9MthCumRf | 12MthCumRf
-------------------------------------------------------------------
203| 5/30/2005 | 485.5 | 444.9 | 744.34 | 755.34
if Main_ID=203, Date_Taken=4/5/2005,
i should pickup following rows
Main_ID | Month_Year | 3MthCumRf | 6MthCumRf | 9MthCumRf | 12MthCumRf
203| 4/30/2005 | 435.5 | 400.9 | 290.34 | 234.34
Need someone help... plz
Case When Statement
Aug 22, 2013In my temptable I'm still trying to replace NULL values with 0 (zero).I tried ISNULL and that didn't work.I tried ISNULL and it didn't work. I was told by a senior developer I work with that I should do something like a case when. whatever that is.
INSERT INTO #TEMPLEASEDOLLARSSUBMITTED (SalesName, UserID, LeaseDollarsSubmitted)
(
SELECT (FirstName + '' + LastName)AS [Sales Team Member], Usr.UserID,
SUM (ISNULL(MerAppEqL.MonthlyPayment,0))AS [Leases $ Submitted]
FROM MerchantAppEquipmentLease MerAppEqL WITH(NOLOCK)
INNER JOIN MerchantAppEquipment MerAppEqt ON MerAppEqL.EquipmentLeaseID = MerAppEqt.LeaseNumber
[code]...
Or should I have put the ISNULL when I updated #TEMPDASHBOARD because that is where the NULL values show up. They don't show up in #TEMPLEASEDOLLARSSUBMITTED table?
Case Statement
Jan 3, 2006Hello,
I have a sql statement that uses case statement to calculate a variable, I would like to use that variable in the same sql statement to calculate a different variable.
In my code Wed_Var is calculated, but since I dont know a way to use the Wed_Var in Wed_Adj, I copy the whole formula again.
Any help is appreciated.
Thanks
SELECT TOP 100 PERCENT dbo.VIEW_ManPlan_Dock_Prev_4WK.Terminal,
Wed_Var = CASE WHEN dbo.VIEW_ManPlan_Dock_Prev_Current.Tue = 0 THEN dbo.VIEW_ManPlan_Dock_Prev_Run_Tuesday.Tue_Var WHEN (dbo.VIEW_ManPlan_Dock_Prev_Current.Mon
+ dbo.VIEW_ManPlan_Dock_Prev_Current.Tue)
/ dbo.VIEW_ManPlan_Dock_Prev_Run_Tuesday.Week_To_Date < .75 THEN .75 WHEN (dbo.VIEW_ManPlan_Dock_Prev_Current.Mon + dbo.VIEW_ManPlan_Dock_Prev_Current.Tue)
/ dbo.VIEW_ManPlan_Dock_Prev_Run_Tuesday.Week_To_Date > 1.25 THEN 1.25 ELSE (dbo.VIEW_ManPlan_Dock_Prev_Current.Mon + dbo.VIEW_ManPlan_Dock_Prev_Current.Tue)
/ dbo.VIEW_ManPlan_Dock_Prev_Run_Tuesday.Week_To_Date END,
Wed_Adj = CASE WHEN dbo.VIEW_ManPlan_Dock_Prev_Current.Tue = 0 THEN dbo.VIEW_ManPlan_Dock_Prev_Run_Tuesday.Tue_Var * (dbo.VIEW_ManPlan_Dock_Prev_4Wk.Wed
/ 4) WHEN (dbo.VIEW_ManPlan_Dock_Prev_Current.Mon + dbo.VIEW_ManPlan_Dock_Prev_Current.Tue)
/ dbo.VIEW_ManPlan_Dock_Prev_Run_Tuesday.Week_To_Date < .75 THEN .75 * (dbo.VIEW_ManPlan_Dock_Prev_4Wk.Wed / 4)
WHEN (dbo.VIEW_ManPlan_Dock_Prev_Current.Mon + dbo.VIEW_ManPlan_Dock_Prev_Current.Tue)
/ dbo.VIEW_ManPlan_Dock_Prev_Run_Tuesday.Week_To_Date > 1.25 THEN 1.25 * (dbo.VIEW_ManPlan_Dock_Prev_4Wk.Wed / 4)
ELSE (dbo.VIEW_ManPlan_Dock_Prev_4Wk.Wed / 4) * ((dbo.VIEW_ManPlan_Dock_Prev_Current.Mon + dbo.VIEW_ManPlan_Dock_Prev_Current.Tue)
/ dbo.VIEW_ManPlan_Dock_Prev_Run_Tuesday.Week_To_Date) END,
Week_To_Date = CASE WHEN dbo.VIEW_ManPlan_Dock_Prev_Current.Tue = 0 THEN dbo.VIEW_ManPlan_Dock_Prev_Run_Tuesday.Week_To_Date + (dbo.VIEW_ManPlan_Dock_Prev_4Wk.Wed
/ 4)
* dbo.VIEW_ManPlan_Dock_Prev_Run_Tuesday.Tue_Var WHEN (dbo.VIEW_ManPlan_Dock_Prev_Current.Mon + dbo.VIEW_ManPlan_Dock_Prev_Current.Tue)
/ dbo.VIEW_ManPlan_Dock_Prev_Run_Tuesday.Week_To_Date < .75 THEN dbo.VIEW_ManPlan_Dock_Prev_Run_Tuesday.Week_To_Date + (dbo.VIEW_ManPlan_Dock_Prev_4Wk.Wed
/ 4) * .75 WHEN (dbo.VIEW_ManPlan_Dock_Prev_Current.Mon + dbo.VIEW_ManPlan_Dock_Prev_Current.Tue)
/ dbo.VIEW_ManPlan_Dock_Prev_Run_Tuesday.Week_To_Date > 1.25 THEN dbo.VIEW_ManPlan_Dock_Prev_Run_Tuesday.Week_To_Date + (dbo.VIEW_ManPlan_Dock_Prev_4Wk.Wed
/ 4) * 1.25 ELSE dbo.VIEW_ManPlan_Dock_Prev_Run_Tuesday.Week_To_Date + (dbo.VIEW_ManPlan_Dock_Prev_4Wk.Wed / 4)
* ((dbo.VIEW_ManPlan_Dock_Prev_Current.Mon + dbo.VIEW_ManPlan_Dock_Prev_Current.Tue)
/ dbo.VIEW_ManPlan_Dock_Prev_Run_Tuesday.Week_To_Date) END
FROM dbo.VIEW_ManPlan_Dock_Prev_4WK INNER JOIN
dbo.VIEW_ManPlan_Dock_Prev_Current ON
dbo.VIEW_ManPlan_Dock_Prev_4WK.Terminal = dbo.VIEW_ManPlan_Dock_Prev_Current.Terminal INNER JOIN
dbo.VIEW_ManPlan_Dock_Prev_Run_Tuesday ON
dbo.VIEW_ManPlan_Dock_Prev_4WK.Terminal = dbo.VIEW_ManPlan_Dock_Prev_Run_Tuesday.Terminal
ORDER BY dbo.VIEW_ManPlan_Dock_Prev_4WK.Terminal
Case Statement
Mar 26, 2007(CASE WHEN (Sheet1$.NOTES = 'unscheduled visit')
THEN 1 END) AS [unscheduled visit]
I am not sure how to use the Case statement with more than one Note
ie
unscheduled visit
early termination
I tried
(CASE WHEN (Sheet1$.NOTES = 'unscheduled visit') OR (Sheet1$.NOTES = 'early termination')
THEN 1 END) AS [unscheduled visit]
(CASE WHEN (Sheet1$.NOTES = 'unscheduled visit'OR'early termination')
THEN 1 END) AS [unscheduled visit]
I am confused on the proper syntax. All the example I can find use a numeric value. Thanks!
Case Statement ?
May 9, 2007I have a case statement:
(AVG_Excess*1.0) / CASE Bound WHEN 0 THEN 1 ELSE Bound END AS Avg_SIR_Excess
I want to add null as a when statement with 0 is this correct syntax to use:
(AVG_Excess*1.0) / CASE Bound WHEN 0 or NULL THEN 1 ELSE Bound END AS Avg_SIR_Excess
Thanks!
WHEN / CASE Statement
Jul 5, 2007Folks!
Getting error msg from the attached stored procedures! Error msg-'Invalid column name 'TRUE'
can you help/tell what I'm doing wrong
Thk
Josephine
CREATE PROCEDURE dbo.SP_EXPERIAN_QUEUE
(
@FRAUDANALYSTNVARCHAR(50),
@QUEUENVARCHAR(24),
@STATUSNVARCHAR(24)
)
AS
SELECT
E.EXPERIANID,
E.ALERT_RECEIVED_DATE,
E.ACCT,
E.SRC_INDV_ID,
E.INQUIRY_GOVT_NUMBER,
E.CUST_NM,
E.INQUIRY_STATE,
E.INQUIRY_DATE,
E.ALERT_IDENTIFIER,
E.[OVERRIDE] ,
E.BEST_SSN,
E.PRECISEIDSCORE
FROM
TBLEXPERIAN E
WHERE
TRUE = CASE
WHEN @FRAUDANALYST = 'ALL' THEN TRUE
WHEN EXPERIANANALYSTASSIGNED = @FRAUDANALYST THEN TRUE
ELSE FALSE END
AND
TRUE = CASE
WHEN @QUEUE = 'ALL' THEN TRUE
WHEN @QUEUE = 'LOWSCORE' AND
(
E.PRECISEIDSCORE < '500' OR
(
E.PRECISEIDSCORE < '600' AND
(
E.FraudShieldIndicator4 = 'Y' OR
E.FraudShieldIndicator5 = 'Y' OR
E.FraudShieldIndicator6 = 'Y' OR
E.FraudShieldIndicator13 = 'Y' OR
E.FraudShieldIndicator14 = 'Y' OR
E.FraudShieldIndicator25 = 'Y' OR
E.FraudShieldIndicator26 = 'Y' OR
E.FraudShieldIndicator27 = 'Y' OR
E.FraudShieldIndicator16 = 'Y' OR
E.FraudShieldIndicator10 = 'Y'
)
)
) THEN TRUE
WHEN @QUEUE = 'HIGH' THEN TRUE
ELSE FALSE END
AND TRUE = CASE
WHEN @STATUS = 'ALL' THEN TRUE
WHEN @STATUS = 'PENDING' and
(
E.EXPERIAN_DECISION_DT IS NOT NULL AND
E.EXPERIAN_DECISION IN ('YELLOW',
'E-MAIL SENT',
'ESCALATED FOR DECISION',
'MANAGEMENT REVIEW',
'QUALITY REVIEW',
'7 DAY LETTER')
) THEN TRUE
WHEN @STATUS = 'UNWORKED' AND
E.EXPERIAN_DECISION_DT is null THEN TRUE
ELSE FALSE END
Josephine