Join Results From Multiple EXEC Calls
Apr 25, 2006I would like to make inner join with results from different exec %procedureName% calls.
thanks.
ADVERTISEMENT
SQL Job Fails After 4 Failed Exec() Calls
Apr 16, 2008I am running the code below in a sql job. Exec (@SQL) errors every time but after 4 failures the job fails instead of trying @MaxRetries times. Any idea on why this is happening?
Set @RetryCounter = 0
WHILE (@RetryCounter < @MaxRetries)
Begin
SELECT @error_value = 0
Exec (@SQL)
SELECT @error_value = @@ERROR
If @error_value = 0
Set @RetryCounter = @MaxRetries
Else
Begin
WAITFOR DELAY '00:05:00'
Set @RetryCounter = @RetryCounter + 1
End
End
Multiple Calls To SP
May 16, 2006Hi group,
I've got a performance issue.
Here's in global what the sp (Let's call it SP_A) does.
Step 1 Call a different SP (Lets call it SP_B) and store the output in a variable
Step 2 SP_B runs a select statement that returns 1 value
Step 3 SP_A uses this value as a parameter in a select statement.
Step 4 The result of the SP_A is the result of the select statement (744 rows (always))
All tables used in SP_A and SP_B are temp tables.
Total performance of SP_A is between 0.090 and 0.140 seconds.
The problem is that this SP is called 180 times from outside SQL server. That means that the total processing time is somewhere between 21 and 25 seconds.
When I move the entire processing to within SQL server I gain only 2 seconds. So I lose 2 seconds in connecting to the database 180 times.
Can someone give me some pointers on where to look for performance wins?
If you like I can add the SP's
Regards,
Sander
Combine Multiple Sql Calls Into 1
Jan 15, 2006I have an old app that I'm trying to recode and improve performance.
From the start it makes three seperate calls to a db, checks to see if the record exists, if it doesn't it adds it, then takes the data from all three and inserts it into a final call.
Here is a quick example of the script
Select * from table1 where id = " & tempVariable
If Not RS.EOF Then
strTable1 = RS("SomeRec")
Else
RS.ADDNEW
RS("SomeRec") = tempRec1
RS.UPDATE
RS.Requery
strTable1 = RS("SomeRec")
End If
RS.CLOSE
Select * from table2 where id =2
If Not RS.EOF Then
strTable2 = RS("SomeRec")
Else
RS.ADDNEW
RS("SomeRec") = tempRec2
RS.UPDATE
RS.Requery
strTable2 = RS("SomeRec")
End If
RS.CLOSE
Select * from table3 where id =3
If Not RS.EOF Then
strTable3 = RS("SomeRec")
Else
RS.ADDNEW
RS("SomeRec") = tempRec3
RS.UPDATE
RS.Requery
strTable3 = RS("SomeRec")
End If
RS.CLOSE
INSERT INTO Table4 (Table1, Table2, Table3) VALUES ('" & strTable1 & "', '" & strTable2 & "', '" & strTable3 & "'
These is probably an easy solution however I don't know where to start. Any help or ideas will be greatly appreciated.
Thanks
-Scott
Multiple Calls To ServerReport.SetParameters() With Varying Numbers Of Parameters
Jun 20, 2007I'm new to programming with the ReportViewer object and this issue has me stumped: it appears if you have some optional parameters in your report, and a way to refresh that report with different parameter values, the report "remembers" parameter values from previous calls to SetParameters() on subsequent renderings of the report. If a parameter is included in a call to ServerReport.SetParameters() on the first rendering, but not included in a subsequent call and the report is re-rendered, the previous value of the parameter (rather than the default value) appears to be used.
Here's a snippet of some test code I wrote within an ASP.NET 2.0 test application:
protected void Page_Load(object sender, EventArgs e)
{
if (!Page.IsPostBack)
{
this.rptViewer.ServerReport.ReportServerUrl = new Uri(this.txtReportServerUrl.Text);
this.rptViewer.ServerReport.ReportPath = this.txtReportPath.Text;
}
}
protected void btnViewRpt_Click(object sender, EventArgs e)
{
ReportParameter[] rptParams = GetReportParameters();
this.rptViewer.ServerReport.SetParameters(rptParams);
this.rptViewer.ServerReport.Refresh();
}
private ReportParameter[] GetReportParameters()
{
int paramCount = 0;
ReportParameter[] retVal;
string emptyVal = null;
if (txtName.Text != "") paramCount++;
if (txtAddress.Text != "") paramCount++;
if (txtZip.Text != "") paramCount++;
retVal = new ReportParameter[paramCount];
paramCount = 0;
if (txtName.Text != "")
retVal[paramCount++] = new ReportParameter("Name", txtName.Text);
if (txtAddress.Text != "")
retVal[paramCount++] = new ReportParameter("Address", txtAddress.Text);
if (txtZip.Text != "")
retVal[paramCount++] = new ReportParameter("Zip", txtZip.Text);
return retVal;
}
The test report was written to simply echo back the values of the parameters that are specified. The report definition allows NULL to be specified for the parameters.
The test app was written so if I enter a blank value for Name, Address or Zip, the corresponding parameter does not get created in C# and does not get sent to the report server. If I view the report with all three values (parameters) filled in, I see the parameters echoed back to me in my simple report as expected. If I clear the parameter values the first time the report is rendered, none are sent to the report server and I get no values echoed back in my report, also as expected. I can change the values and click on the View Report button and see the new values for the parameters as expected. However, if I clear any previously-specified parameters and click on View Report, the previously-specified values for the ones that are now cleared are still displayed by the report.
So my question is: once a parameter has been sent to the report, how does one "unsend" it on subsequent refreshes? I know I can create the parameter and set its value to null...but I have a situation here where that can cause errors. It'd be better if I could simply leave out the unspecified parameters and have the report refresh and render as if I were rendering it for the first time.
Any suggestions?
Exec Without Results
Feb 20, 2007this might sound dumb or impossible, but is there a way to run exec commands forcing them to not return results
View 6 Replies View RelatedEXEC @SQLString With Output Results
Jun 2, 2005Hello, I have been working around this issue, but couldn't yet find any solution.I have a stored procedure that calls a method to do a certain repetitive work.In this function, I have a dynamic query, which means, that I am concatinating commands to the query depending on the input of the function.for example, there is an input for a function called "Id"Inside the function, if Id = 111I need to add " and ID <> 1" and if Id has another value I need to add " and ID = c.ID" something like that.Now, inside the function, I need to return a value by executing the above @SQLString as follows:EXEC @SQLStringWhen I need is something likeEXEC @SQLString, @Total OutputReturn (@Total)Are there any ideas ?regards
View 1 Replies View RelatedWierd XML Results From 'Exec SQL Task
Sep 15, 2006Hi All, we got a problem that I hope you guys can help us with.
We are trying to extract data from a SQL database in XML format to a variable (string) using an 'Execute SQL Task'
In the task we are using an ADO.NET connection to the database which is fine and via direct input we are using this query.
SELECT
title,
initials,
surname,
username,
gender,
emailaddress,
addressline1,
addressline2,
addressline3,
town,
postcode,
country,
emailcontact,
postalcontact,
telephone
FROM
CRMCustRecords
FOR XML path('customer'), root('CRMData'), ELEMENTS XSINIL
In SSMS this is fine and returns an ok (to my eyes anyway!) XML resultset.
<CRMData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<customer>
<title>xxx</title>
<initials>xxxxxxx</initials>
<surname>xxxxxx</surname>
<username>xxxxxx</username>
<gender>x</gender>
<emailaddress>xxxx@xxxxxxx.xx.xx</emailaddress>
<addressline1>xxxxx</addressline1>
<addressline2 xsi:nil="true" />
<addressline3 xsi:nil="true" />
<town>xxxx</town>
<postcode>xxxxxxxxx</postcode>
<country>xx</country>
<emailcontact>x</emailcontact>
<postalcontact>x</postalcontact>
<telephone>99999999999</telephone>
</customer>
<customer>
</CRMData>
However the SSIS task (running exactly the same query) is returning
<ROOT>
<CRMData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<customer>
<title>xxx</title>
<initials>xxxxxxx</initials>
<surname>xxxxx</surname>
<username>xxxxxxxx</username>
<gender>x</gender>
<emailaddress>xxxxx@xxxxxxxxxx.xx.xx</emailaddress>
<addressline1>xxxxxxxxxx</addressline1>
<addressline2 xsi:nil="true" />
<addressline3 xsi:nil="true" />
<town>xxxxx</town>
<postcode>xxxxxxxx</postcode>
<country>xx</country>
<emailcontact>x</emailcontact>
<postalcontact>x</postalcontact>
<telephone>9999999999</telephone>
</customer>
</CRMData>
</ROOT>
I setup the query as a stored procedure and changed the SSIS accordingly. Running the sp from within SSMS was fine but the task still returned the wierd results.
This is completely unexpected and giving us headaches. It doesn't even look like well-formed XML to my eyes and won't display in IE without showing problems! Where are the eroneous /'s and ROOT nodes coming from?
I can't imagine we are the only people to have run into this and I'm sure we aren't doing something quite right - just stuck as to what we're doing wrong.
Hopefully I've provided enough info. If not just ask.
Thanks for any and all input
Pat
Capturing The Results From Exec Command
Apr 21, 2006Hi,
I'm writing a small query where I have a dynamic table name and dynamic condition for the criteria. In order to execute this, I need Exec command.
exec(select count(*) from @dynamictable where condition = @dynamiccond)
But here I want to capture the count from the select statement. Could any of you help me capture the results from exec command?
Thanks
Need To Pull A Select Few Results From INSERT EXEC
Aug 17, 2006I'd *like* to execute a sProc within another sProc, because this other one (let's call it dataProc) will provide me with results I need that are calculated based off execing other procs within that proc itself.
I'd like to use this data in a new sProc (we'll call it newProc), but I don't need NEARly all of the columns. The dataProc returns 1 row with 42 columns. I need about 4-5 of those for my newProc.
The dataProc does not have any output variables, and I do not want to change the signature, because several pages/apps use this existing dataProc.
My question:
Is there a way to INSERT INTO table EXEC dataProc
*Without* making a temp table that takes in every single column the dataProc puts out?
Any help is much appreciated.. thanks!
Right Join Returns Same Results As Left Join
Feb 5, 2015Why does this right join return the same results as using a left (or even a full join)?There are 470 records in Account, and there are 1611 records in Contact. But any join returns 793 records.
select Contact.firstname, Contact.lastname, Account.[Account Name]
from Contact
right join Account
on Contact.[Account Name] = Account.[Account Name]
where Contact.[Account Name] = Account.[Account Name]
Linked Server Exec Stored Procdure Results In Transaction Context In Use By Another Session.
Nov 3, 2005I am using sql 2005 beta
View 23 Replies View RelatedTransact SQL :: Create Email Report Which Gives Result Of Multiple Results From Multiple Databases In Table Format
Jul 24, 2015I'm trying to create an email report which gives a result of multiple results from multiple databases in a table format bt I'm trying to find out if there is a simple format I can use.Here is what I've done so far but I'm having troble getting into html and also with the database column:
EXEC msdb.dbo.sp_send_dbmail
@subject
= 'Job Summary',
@profile_name =
'SQL SMTP',
[code]....
Multiple Concurrent Sql Exec Commands?
Mar 12, 2008I was wondering if it was possible to run 2 queries at the same time,IE rather than runningexec query1 exec query2 and having to wait for query1 to finish before query2 started, just have them run at the same time (they're not conflicting).I want to do this in TSQL, not by opening another query window in vs2005.
View 2 Replies View RelatedExec Storeprocedure - Multiple Joins
May 5, 2008Hi,I am written a store procedure that would access four tables and grab appropriate fields.. I am using JOIN functionality because it can have multiple rows. ( The goal is: )Step 1: User can search by ID or MEMBER_ID or both .. grab all the data from mainTable based on the search. WORKS.Step 2: TABLE 2 (userTable table) get EMAIL for each record that was grabbed.. based on the ID. WORKS.Step 3: TABLE 3 and TABLE 4.. I am having some problems combing into the query.. how to add multiple JOINS… Is it safe? Please see below what data needs to be combined into the query.--Code works for Step 1 and 2.declare @ID varchar(20), @MEMBER_ID varchar(20) set @ID= null --testing data.. set @MEMBER_ID ='15552' –testing data.. Select MainTable.REFNO,MainTable.ID,mainTable.MEMBER_ID,userTable.EMAILFROM mainTableLEFT JOIN userTableON mainTable.ID = userTable.IDWhere (mainTable.ID = @ID OR @ID IS NULL) and(mainTable.MEMBER_ID = @MEMBER_ID OR @MEMBER_ID IS NULL)TABLE 3: (works by itself)SELECT SR.COMPANY, SR.LOCATION_NOFROM SI INNER JOIN SR ON SI.SR_ID = SR.SR_IDWHERE SI.ID = MainTable.ID)ORDER BY SR.DATE_RECEIVED DESCTABLE 4: (works by itself)I will be retrieving LOCATION_NO from SR table and comparing the value to the below query: for each record that was found in the mainTable.select LOCATION_NAME from locationwhere LOCATION_NO= SR.LOCATION_NO Please help me solve this.. Thank you
View 5 Replies View RelatedExec Multiple Batches (GO) With Dynamic Sql
Jun 10, 2008Hello SQL Team!
I'm stuck at this problem for days and need help.
The problem is with the GO keyword. I know the GO causes the batch to get executed and all local variables are lost. But I can't seem to find a work around. I would like each stored procedure to get executed in different batches.
create table sql_cmd(cmd nvarchar(255))
insert into sql_cmd(cmd) values('exec user_sp param1,''param2'')
insert into sql_cmd(cmd) values('exec user_sp2 param1,''param2'')
declare @sql nvarchar(255)
declare c_sql cursor --small table peformance not a problem. Also open to other suggestions
for select cmd from sqlcmd
open c_sql
fetch next from c_sql
into @sql
while @@fetch_status = 0
begin
print @sql
exec sp_executesql @sql
GO
fetch next from c_sql
into @sql
end
Problem Getting Results From A Join
Jan 5, 2007i have a query with some inner joins that return information about an employee
i am running into a problem in that i need one employees email based on one inner join and anothers based on another inner join -- is there a way to get both in one query?
select employee.email , bunch of other stuff
from work
INNER JOIN technician ON business_location.technician_id = technician.technician_id
inner join salesrep on business_location.salesrepid = salesrep.salesrep_id
not sure how to get both of those to employee.emp_id and get the email
technician.technician_id = employee.emp_id
salesrep.salesrep_id = employee.emp_id
Not Getting Distinct Results With Inner Join
Mar 5, 2007Hello, first post since I can usually find answers by reading the forums. I've searched the internet up and down and for some reason I can't get this query to work properly.
I have two tables:
ticket
ticket_id
ticket_to
ticket_from
message
message_id
ticket_id
message
There can be several messages per ticket, connected by the ticket_id. I'd like to only pull only the most recent message, as well as the results from the ticket table. Currently I'm getting all messages per ticket.
Here's what I have:
SELECT distinct ticket.ticket_to, ticket.ticket_from, message.ticket_id, message.message
FROM tickets
INNER JOIN message ON tickets.ticket_id = message.ticket_id
GROUP BY message.ticket_id, message, ticket_to, ticket_from
Any help would be greatly appreciated! Thanks much.
Inner Join Multiplies Results....
Oct 16, 2007
Hi, i guess u have run into it again..
I have 3 tables
Table 1 is holding word documents :
WordDoc
wd_id integer primary key
wd image
Table 2 is holding parts of the document in a master detail fashion as from one document we can create many parts of it.
WordPartDoc
wpd_id integer primary key
wpd_wd_id integer foreign key from WordDoc
wpd_part image
Table 3 holds the persons or groups to whom we have given a copy of a specific part.
PersonsCopiedAt
pca_id integer primarey key
pca_wpd_id integer foreing key from WordPartDoc
pca_pg_id integer this is the id of the table that holds the persons or the id of the table that holds the group
pca_p_or_g char(1) this is a flag : 'P' for a person, 'G' for a group
Now, here is my problem... I have created the following sql query
select wd_id, wpd_id
from wordDoc
inner join wordPartDoc on wpd_wd_id = wd_id
inner join PersonCopiedAt on pca_wpd_id = wpd_id
where pca_pg_id = someID and pca_p_or_g = 'G' --or 'P'
This works perfectly if a pca_pg_id is provided, but this is provided using a combobox... If the user doesn't select a person - and thus - no id is provided - inner join brings me as many records of wpd_id as the number of persons that were given a copy. I understand that this is the correct behaviour but in the later case (when no id is provided) i want only one record to be returned. Is there a way to do so ? do i have to redisign the db schema ?
thanx
theodore
Join Results Of SQL Queries
Jan 25, 2008Hello all,
I have been using T-SQL for a while now although the majority of my work required relativley simple queries.
I just need to know is there a way to JOIN the results of several SELECT queries, maybe through the use of functions??
A reference to any online article would be most helpful.
Cheers,
Sean
JOIN Multiple Tables From Multiple Databases
May 23, 2008Hello,
I am in the progress of designing a new section of my database and was thinking of creating a hole new database instead of just creating tables inside the database. My question is can you JOIN multiple tables in an SQL Statement from multiple databases. Ie, In the Management program I have a database called 'Convention' and another one called 'Services', inside the two databases there are many tables. Can I link say tblRegister from Convention to tblUser in Services?
Thanks
How Can I JOIN The Results Of Two Stored Procedures?
Jun 11, 2007How can I JOIN the results of two stored procs?
I have a two stored procs: sp_Users_GetByID and sp_UserInfo_GetByID
I want to create another stored proc that basically grabs the results from both of these, joins them, and returns that data. I just don't know how...
Suppress Duplicates In Join Results
Sep 2, 2004I really must be missing something here...
Trying to cross-update 2 tables.
Picture a checkbook reconcilliation without common check numbers. The checkbook has uniqueids and the bank has transaction ids but they are different. So the match is on date/payee and amount. So I wrote 2 checks to the same person, on the same day, for the same amount but forgot to enter one in the register.
when i run the update statement:
update b set b.bankid=c.myid
from checks c
join bank b on c.cdate=b.cdate
and c.payee=b.payee
and c.cost=b.cost
Both bank statement records would be updated to my one check record [can't happen]
Also: this will be running on a hundred thousand records per month with potential for duplication/ommission on either side.
What's a poor newbie missing??
I'm doing something similar on a lesser volume by running sequential statements through an ASP script but performance is poor. I know SQL can do this, just not how to approach it.
Thanks for any guidance
Dale
Two Tables - Join And Filtering Results
Jan 28, 2015I have two tables, one with data for one type of ID (call it key1) and a table where this ID (call it key2) is transformed to another. It is not one-to-one match with these types of ID and I want to check those key2 cases that have two or more key1 linked to it.
It is simple enough and for the easiest check I don't even need table1 to run it as table2 has both key1 and key2 variables.
However, not all doubles are of identical worth. Table1 (that has only key1) has a year variable. I am interested in doubles that have same year variable, ie. in table1 there are two key1 cases with the same year variable that are linked to one key2 case in table2.
So in essence in table1 I have key1, year and in table2 I have key1, key2 and I am interested in those key2-cases that have more than one key1 linked to it where years are the same.
SELECT query.key2
FROM (
SELECT DISTINCT a.key1, b.key2
FROM table1 AS a JOIN table2 AS b ON a.key1=b.key1 JOIN table1 AS c ON
a.key1=c.key1
WHERE a.year=c.year)
AS query
GROUP BY query.key2
HAVING COUNT(*)>1
I tried it joining table1 twice and fiddling around with various JOIN and WHERE clauses (the one on show being the simplest and most naive one) but the query still returns key2-doubles whose key1 cases are linked to different years. It is simple enough if you give a distinct year value in where clause (and drop second table1 join as unnecessary) but I don't want to go through all years manually one by one. I was thinking some kind of iterative loop that changes the value of the year in where clause could do the trick (and be heavy computationally) but I don't really know how to go around doing it, haven't done any loops in SQL ever.
Why Is This JOIN Statement Not Returning The Right Results?
Sep 19, 2007
Hi,
I have three tables:
1 Order Details
2 Product Info
3 Received Qty
The query is pretty simple however I'm getting incorrect results.
The query grabs a load of information (including a SUM statement) from the order details tbl.. this is INNER JOIN ed to the products tbl to match an ID field which grabs some extra info from the product info tbl.
all fairly straightforward and works without a problem..
However I now need to add in the received qty tbl (as the name suggests this keep a track of the qty's of items received)
I need to join this tbl to the order details tbl based on a unique ID from the orders tbl and then SUM together all of the entries in that received qty tbl for that item.
Result is I get a single record which shows the qty ordered (from the order details tbl), and the total received (from the received qty) tbl
These are held in a seperate tbl as an order can be deliveryed in several stages.
Here is my statement:
SELECT PDS_Login.Supplier_Products.ProductName, PDS_Login.Supplier_Products.ProductCode, dbo.Suppliers_POs_Details.POID,
dbo.Suppliers_POs_Details.PODetailsID, dbo.Suppliers_POs_Details.Qty, dbo.Suppliers_POs_Details.PricePerItem,
dbo.Suppliers_POs_Details.PoDetailsStatus, dbo.Suppliers_POs_Details.PoDateExpected, dbo.Suppliers_POs_Details.PODateReceived,
SUM(dbo.Suppliers_POs_Details.Qty * dbo.Suppliers_POs_Details.PricePerItem) AS LineTotal, SUM(dbo.Suppliers_POs_Details_Received.Qty)
AS QtyReceived
FROM dbo.Suppliers_POs_Details INNER JOIN
PDS_Login.Supplier_Products ON dbo.Suppliers_POs_Details.ProductID = PDS_Login.Supplier_Products.ProductID LEFT OUTER JOIN
dbo.Suppliers_POs_Details_Received ON dbo.Suppliers_POs_Details.PODetailsID = dbo.Suppliers_POs_Details_Received.PODetailsID
WHERE (dbo.Suppliers_POs_Details.POID = @POID)
GROUP BY dbo.Suppliers_POs_Details_Received.Qty, PDS_Login.Supplier_Products.ProductName, PDS_Login.Supplier_Products.ProductCode,
dbo.Suppliers_POs_Details.POID, dbo.Suppliers_POs_Details.PODetailsID, dbo.Suppliers_POs_Details.Qty, dbo.Suppliers_POs_Details.PricePerItem,
dbo.Suppliers_POs_Details.PoDetailsStatus, dbo.Suppliers_POs_Details.PoDateExpected, dbo.Suppliers_POs_Details.PODateReceived,
dbo.Suppliers_POs_Details_Received.Qty
The problem is, if there is more than one relating record in teh Received Qty tbl instead of that being added together as I want, two results appear...
It's obviously something simple but I can't seem to figure it out - anyone point me in the right direction?
Row_number With Distinct And Inner Join Messes Up Results
Jul 28, 2007I want to select all usernames from tlbUsers which practice a certain sport.I also have a table UsersAndSports:UserID intSportID intI therefore need an inner join statement:select username from(SELECT ROW_NUMBER() OVER (ORDER BY au.LastActivityDate DESC) as RowNum,ud.username from tblusers usinner join tblUsersAndSports uas on uas.usercode=us.usercode and (uas.sportID=3 or uas.sportID=4)WHERE us.UserName <>'' )as MemberInfo WHERE RowNum between (@startRowIndex+1) AND (@startRowIndex+@maximumRows)The problem lies in the usage of the ROW_NUMBER command. I need that in order to effectively page through my records, but it also makes thatI cant make a distinct selection as each RowNum is unique....:SIn case the user would practice 2 sports, the query would return 2 rows...if I place a distinct in front of the username as such:select distinct username fromThe query would return each user only once...BUTBUTBUT: my startrowindex and maximumrows apply to the results that can be found in the MemberInfo selection..so lets say my startrowindex would be 0 and maximumrow 5if my 1st query (without distinct) was to return:johnjohnjohnjohnmikemikerobmy 2nd query (with distinct) would return:johnmikewhereas I want it to return:johnmikerobWhat can I do?
View 2 Replies View RelatedReturning Results Left Outer Join With Conditions
Sep 21, 2006I have a SELECT Statement that I am using that is pulling from two tables. There won't always be results in the second table so I made a LEFT OUTER JOIN. The problem I am having is that I need to have three conditions in there:WHERE (employee.emp_id = @emp_id) AND (request.requested_time_taken = 'FALSE') AND (request.request_end_date >= GETDATE()))The two conditions from the request table are causing the entire query to return NULL as the value. I need help trying get a value whether or not there are any results in the request table.Here is the full select statement:SELECT (SELECT SUM(ISNULL(request.request_duration, '0')) AS Expr1
FROM employee LEFT OUTER JOIN
request AS request ON employee.emp_id = request.emp_id
WHERE (employee.emp_id = @emp_id) AND (request.requested_time_taken = 'FALSE') AND (request.request_end_date >= GETDATE()))
AS dayspending
FROM employee AS employee_1 LEFT OUTER JOIN
request AS request_1 ON employee_1.emp_id = request_1.emp_id
WHERE (employee_1.emp_id = @emp_id)
GROUP BY employee_1.emp_id, employee_1.emp_begin_accrual, employee_1.emp_accrual_rate, employee_1.emp_fname, employee_1.emp_minitial,
employee_1.emp_lname
Transact SQL :: How To Join Results Of Two Queries By Matching Columns
Aug 10, 2015I have two queries as below;
SELECT EventID, Role, EventDuty, Qty, StartTime, EndTime, Hours
FROM dbo.tblEventStaffRequired;
and
SELECT EventID, Role, StartTime, EndTime, Hours, COUNT(ID) AS Booked
FROM tblStaffBookings
GROUP BY EventID, Role, StartTime, EndTime, Hours;
How can I join the results of the two by matching the columns EventID, Role, StartTime and EndTime in the two and have the following columns in output EventID, Role, EventDuty, Qty, StartTime, EndTime, Hours and Booked?
(SQL 2000) Incorrect Results When Using An Outer Join And A View!
Mar 29, 2008Hi,
I have a query written in SQL 2000 which returns incorrect result. The query uses left outer join and a view. I read an issue related to this in one of microsoft bug report in this article http://support.microsoft.com/kb/321541.
However, there's a slight difference in the sympton second bullet wherein instead of a expression the query returns a fixed string for one of the column value.
Although the issue mentioned in article seems to be fixed. The later one still seems to be reproducible even with Service Pack 4. However, this issue doesn't appear in SQL Server 2005.
Here's the query to reproduce this error.
Code Snippetcreate table t1 (pk1 int not null,primary key (pk1))
create table t2 (pk1 int not null,label1 varchar(10) not null,primary key (pk1))
go
insert into t1 values (1)
insert into t2 values (2, 'XXXXX')
go
create view V as
select pk1, 'ZZZZ' as label1 from t2
go
select A.pk1 as A_pk1, B.pk1 as B_pk1, B.label1 as B_label1
from t1 as A left outer join V as B on A.pk1 = B.pk1
go
This query is similar to the one mentioned in the article except that in the SELECT clause of CREATE VIEW statement I am passing a fixed value for column "label1".
I just want to confirm that this is an issue and no fix is available for this so far.
Regards,
Naresh Rohra.
SQL Server 2012 :: How To Join Pivot Results With Dynamic Columns
Mar 5, 2015I have a lookup table, as below. Each triggercode can have several service codes.
TriggerCodeServiceCode
BBRONZH BBRZFET
BBRONZH RDYNIP1
BBRONZP BBRZFET
BCSTICP ULDBND2
BCSTMCP RBNDLOC
I then have a table of accounts, and each account can have one to many service codes. This table also has the rate for each code.
AccountServiceCodeRate
11518801DSRDISC -2
11571901BBRZFET 5
11571901RBNDLOC 0
11571901CDHCTC 0
17412902CDHCTC1 0
14706401ULDBND2 2
14706401RBNDLOC 3
What I would like to end up with is a pivot table of each account, the trigger code and service codes attached to that account, and the rate for each.
I have been able to dynamically get the pivot, but I'm not joining correctly, as its returning every dynamic column, not just the columns of a trigger code. The code below will return the account and trigger code, but also every service code, regardless of which trigger code they belong to, and just show null values.
What I would like to get is just the service codes and the appropriate trigger code for each account.
SELECT @cols = STUFF((SELECT DISTINCT ',' + ServiceCode
FROM TriggerTable
FOR XML PATH(''), TYPE
).value('(./text())[1]', 'VARCHAR(MAX)')
,1,2,'')
[Code] ....
Merge Join Gives Unexpected Results When The Input Has Speacial Characters
May 14, 2007Hi
I have a strange issue here.
Both the input datasets of the merge join are sorted . Everything works fine if the dataset doesn't contain speacial characters like - (hipen).
This is the sorted dataset.ASI311_3ASI311_3ASI312ASI311ASIKit1ASIKit1
Merge Joiner has to look for ASI311 and finds it in the list and everything works as expected. But if the dataset is changed to
ASI311_3ASI311_3ASI-312ASI311ASIKit1ASIKit1
Then it doesn't find the ASI311 in the above dataset ?
Only change between the two datasets is the - (hipen) which is added in one of the field. Does SSIS has a differenent precedence of the special characters than that of the Database. Both the datasets are on SQLServer.
Can anyone point out the issue here?
Thankyou
Vidya
DTS Package With Multiple Results
Feb 28, 2008Hi everyone, I have a DTS package on my SQL Server database that returns several different results. Does anybody know how I would access any one particular part of the return. I am trying to make it so that there is only one run to the database for the information, but am not sure how to get just the parts I want out of the DTS package. for Example, here is my DTS Package:
Select @InvoiceNo as InvoiceNo, '02/01/08' as PaymentDate, 1000.00 as PaymentAmt, 500.00 as RemainingAmt, 'X31235X' as ReceiptNumber
Declare @Results Table ( InvoiceNo char(10), Amt float)
Insert Into @Results Values('SNJ0100001',100.00)Insert Into @Results Values('SNJ0100002',200.00)Insert Into @Results Values('SNJ0100003',300.00)
Select * from @Results
How would I ask for just the results from the @Results section and then somewhere else on my page I will want to return just the results from the @InvoiceNo section?? I would normally call the package from my code-behind and I know how to do that, just not to pull a particular section. Here is what I have so far on that section:
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"SelectCommand="hsp_rpt_AR_ReceiptStatus" SelectCommandType="StoredProcedure"><SelectParameters><asp:ControlParameter ControlID="TextBox1" Name="InvoiceNo" PropertyName="Text" Type="String" /></SelectParameters></asp:SqlDataSource>
Thanks for any helpRandy
Combining Multiple Results Into One Row
Mar 6, 2006Hey guys, here is my issue, i'm trying to combine multiple columns of data into one row. For example, I have a temp table:
create table #Custom_Address
( patient_idchar(10)null,
episode_idchar(3)null,
custom_address varchar(100) null
)
As you can tell, the 'custom_address' column is going to house the results of the combination.
I am trying to INSERT (combine) using this statement:
INSERT #Custom_Address
select cm.patient_id, cm.episode_id, (cc.coverage_plan_add1 +' ' + coverage_plan_add2 + ' ' + coverage_plan_city+ ' ' + coverage_plan_st+ ' ' + coverage_plan_zip) as custom_address
FROM #ClaimMaster cm join Coverage_Custom cc on cm.patient_id = cc.patient_id and cm.episode_id = cc.episode_id
WHEREcc.coverage_plan_add1 > 0
OR cc.coverage_plan_add2 > 0
OR cc.coverage_plan_city > 0
OR cc.coverage_plan_st > 0
OR cc.coverage_plan_zip > 0
GROUP BY cm.patient_id, cm.episode_id
I want to insert the patient_id, episode_id, and then combine the 'cc.coverage_plan_add1 +' ' + coverage_plan_add2 + ' ' + coverage_plan_city+ ' ' + coverage_plan_st+ ' ' + coverage_plan_zip' data to represent my "custom_address" column and only when there is data in those columns.
Then I do my update:
UPDATE#ClaimMaster
SET #ClaimMaster.custom_address = ca.custom_address
FROM #ClaimMaster
JOIN#Custom_Address ca on #ClaimMaster.patient_id = ca.patient_id and #ClaimMaster.episode_id = ca.episode_id
However, when I do this, it says my 'cc.coverage_plan_add1 + etc' columns are invalid because they are not contained in either an aggregate function or a GROUP By clause.
If i'm combining all the data to represent a single column, how do I format my group by clause? Or is my entire INSERT statement wrong?
As a side note, my #ClaimMaster table is another temp table, but the problem is not in there.