Can anyone show me how to join 2 different data types in a SQL query. For example, I want to join two tables.
Table 1:
- Field 1 = ID (Varchar,10)
- Field 2 = Balance
Table 2:
- Field 1 = SSN (Numeric, 9)
Field ID should be = to SSN, but the data type is different. PLease help me to join them.
Thanks,
Hi,
I´m exporting an ms-excel file, then I use a lookup transformation to get a field from a SQL Server 2005 table. The Lookup transformation editor, after selecting the table, shows a warning that says:
at least one mapping between a column from available input columns ans a column from available lookup columns must be defined on the columns page.
So I try to make a relationship in the Lookup transformation editor's column tab where I find the Available input columns and the available lookup columns but I get the following error:
The following columns cannot be mapped:
[Department, DEP_CLEGALCODE]
One or more columns do not have supported data types, or their data types do not match.
The field in SLQ Server is varchar(10) and the input field is a derived column transformation; I have tried different Data Types but I always have the same error.
The DataFlow is: ExcelSource --> Derived Column --> Lookup --> Flat file destination
thanks.
I am trying to find a reference for a client that lists the fields available to be substituted into a data driven subscription from the query, along with the expected data types.  For example, the field on whether or not to include a link to the report seems to be expecting a bit data type.I have searched and can't seem to find anything.  I guess I could walk through the interface and try different data types, but if  a list exists, that would be better.Â
View 4 Replies View RelatedDoes anyone know of any cross-references between SQL Server data types and the new data types introduced with SQL Server Integration Services?
View 6 Replies View RelatedOne of my report has different data types like decimal,percentage and integer values.
When I exported the report to excel , all the values are showing as "general" data type.
How to get excel data type same as ssrs report data type by default when exported to excel?
I Have a table with #Sample like below
=================================
#Sample
id int,
SSN varchar(20),
State varchar(2)
Â
Sample Data:
ID SSN STATE
1 999-000-000 AB
2 979-000-000Â BC
3 995-000-000Â CD
=================================
We used filter logic based on the SSN & State.
We are passing these values through variables like
Declare @State varchar(2)
Declare @SSN varchar(20)
While run time these values are lets suppose @SSN = '999-000-000' & @State='ABC'
Now the Result is displayed with the state data Like 'AB' only.
Output: 1 999-000-000 AB
instead it should give system generated error.
Here I have 2 Questions:
1. Why it is taking 1st 2 Charecters?
2. Why it does not have any system generated for length?
I can do validation with Length function for these 2 variables however if have 100 variables then it should not feasible case. So, what is the reason behind?Â
OK so there is some data in an Oracle DB that I need to query and analyze. Unfortunately, the criteria for selecting/grouping the data is stored in a MS Sql Server DB. This cannot be changed.
SqlServerGroup Name ID# Item ConditionAAA123 1 a 1AAA123 2 a 1AAA123 3 a 1AAA123 4 a 2AAA123 5 a 2AAA123 1 b 3AAA123 2 b 4AAA123 3 b 3AAA123 4 b 4AAA123 5 b 3BBB123 1 a 1BBB123 2 a 1BBB123 3 a 2BBB123 4 a 2BBB123 5 a 2
OracleGroup Name ID# ValueAAA123 1 50%AAA123 2 55%AAA123 3 60%AAA123 4 80%AAA123 5 70%BBB123 1 35%BBB123 2 45%BBB123 3 50%BBB123 4 50%BBB123 5 80%
I need to be able to get this:Group Name Item Condition ValueAAA123 a 1 55%AAA123 a 2 75%AAA123 b 3 60%AAA123 b 4 67.5%BBB123 a 1 40%BBB123 a 2 60%
Any idea how I can get the data from these two DBs to talk to each other? Thanks.
I know similar questions have been asked but I wanted to try my luck that my issue is somehow different.
I am querying a database which has detail information (sales transactions) and is grouped by customer. I also have a table with one record for each customer with some historical sales information (summary information). The requirements for the report are to have the sums of the sales for each customer along with the historical data for that customer in the same row in the table. I haven't found a way to do this using one dataset and from what I've read, the current version doesn't support joining multiple datasets over a grouping field (customer).. or at all.
Any one have ideas?
I have an source file and i have to load it into the data base by changing datatype of the columns in ssis
View 1 Replies View RelatedI'm in the process of converting a rather huge VSAM database into a set of SQL tables.
I am using the same data names from the mainframe (like XDB-NAME to RDB-NAME).
I load the files using Import Export Data and it makes the tables with such column names as col001, col002, col003, etc... and always sets the data types to varchr(255).
And I have to cut and paste the data names from the manframe side to the server side (and the data types to.)
So, is there an easier way to do this? Or am I doomed to cut-n-paste my days away...
Thanks for any help.
Hi,
I have multiple table with the same schema as follows
Table1
ID Date
---------------
1 D1
2 D2
3 D3
4 D4
Table2
ID Date
---------------
2 D21
3 D31
4 D41
.....
I just want to build a mater table out of these existing tables . I need a query that builds as faster as possioble as these tables might contains millions of records
The final Table Should be as follows
ID CatName Date
------------------------------
1 Name1 D1
2 Name2 D2
2 Name21 D21
3 Name3 D3
3 Name31 D31
4 Name4 D4
4 Name41 D41
Can any one provide me with the best performace query that results the above output
With Best Regards,
~Mohan
Hello,
I am using Visual studio 2005 and have such a problem. I have a report that takes most of its date from €śordersview€? that is linked to lots of other fields. The final report has fields such as product name, number, Date, quantity and actual quantity etc. This works fine, but the program that I get the data from can€™t keep all the data in itself, because it slows the time of its work enormously. So we made it so that all the data of orders that are completed ant older that 2 days would be copied to another table €śOrdersArchive€? and deleted from €śOrders€? table.
Now I need to make a report that takes data from €śordersArchive€? if its older that two days, and from €śorders€? if it is new. The fields are the same in both cases and I would like the data to appear in the same table so it could be grouped, sorted and evaluated by the same criteria. Is it even possible and if it is how should I do it?
For now I only managed to create 2 separate tables in the same report that take date from different datasets.
Regards
Darius
Dear all,
I have four different tables with three columns. The first two columns are equal for all tables. The third column is different:
Table I
COUNTRY | PRODUCT | SALES VALUE
AAA AAA 10
AAA AAB 10
Table II
COUNTRY | PRODUCT | SALES COST
AAA AAC 10
Table III
COUNTRY | PRODUCT | SALES MARGIN
AAB AAA 10
Table IV
COUNTRY | PRODUCT | SALES XXX
AAA AAA 5
What I would like to accomplish is to obtain a table where the records from these tables would be joined in a single table:
COUNTRY | PRODUCT | SALES VALUE | SALES COST | SALES MARGIN | SALES XXX
AAA AAA 10 0 0 5
AAA AAB 10 0 0 0
AAA AAC 0 10 0 0
AAB AAA 0 0 10 0
Can you advise me on what the best way to achieve this is? Thanks!
Kind regards,
Pedro Martins
SQL Server 2000, ASP.Net 1.1
I've been writing this stuff for a while, and can't seem to come to the
conclusion of how I should be retrieving data and assigning this data
to variables.
Since i'm using SQL Server, I'm convinced that I should be using the
datareaders GetSqlDouble (or whatever) function, but this would mean i
need my local variables to be one of the SQL types. The problem
with that is, that there will have to be lots of conversions done by me
to be able to use a SQL type in my application.
For instance, I have a class where i'm retrieving dates. In order
to retrieve them correctly (Null values included), I need to retrieve
them with GetSqlDateTime(), then when it comes time to display the date
in a table, i must first check for nulls, then convert to a
string. This seems to be very cumbersome. Would I be better
off just using GetDateTime(), and the .ToString method, and ignoring
Sql Types all together?
so, basically, how are you guys using your sql server data? with
the supplied sql types, and doing all of the post-processing work
manually? I feel like i'm having trouble conveying my
issue...hopefully someone knows what i mean....i'd just like some
direction to save trouble in the long run, since i feel like there's
got to be a better way...
Confused!
Thanks,
JJ
I have 2 table that I want to join and output a row on a condition that one of the records have a null in the field. Heres what I have.employee table (empid, name)tasks table (taskid, empid, taskname, resolution)If the resolution is null than I want it to be accounted for in each employee record. Heres my query so far that joins the 2 tables and accounts for each employee and counts each task they have. I need another column that counts the tasks.resolution's null values for each employee but cant figure it out. Thanks for any help!SELECT e.empid, e.name, COUNT(t.ID) as 'tcount'FROM tasks t RIGHT JOIN employee e ON c.empid = t.empidGROUP BY e.empid, e.nameorder by 'tcount' desc
View 3 Replies View RelatedIs it possible to easily copy data from one table to another if the data types don't match. I know you can do a INSERT INTO table1(col1,col2) SELECT (col2,col7) FROM table2 if the data types match but is there a way to do this if they don't. I'm not trying to copy date times into bit fields or anything. I just have an old table that I built when I really didn't know what I was doing now I at leastthink I have a better understanding of what data types to use, so I was wanting to move the data in the orignal table to my new one. Most of the fields in the olddatabase are text datatypes and the new database is nvarchar(50) data types. Thanks for any suggestions.
View 4 Replies View RelatedHello,
I have a really dumb question regarding SQL data types. I have a couple columns in a table that are specified as MONEY. These columns are being read from my web app and displayed on the website for reference when filling in other information.
My problem is that when it is displayed on the website it give four decimal places instead of two. For example I want it to report $33,000.29 but what is actually displayed is $33,000.2965.
How can I set up either SQL or my web app so that it only displays the two decimal places? I've looked into changing the datatype already but SMALLMONEY and MONEY have the same type of decimal values.
Thanks!
I am looking for a chart of SQL Server data types and information about them, such as usage, constraints, etc. Could anyone point me in the right direction?
Thanks
I'm just getting used to using SQL 7 Database and am looking for some recommendations on what DATA TYPES to use when designing tables.
The site I am working on now uses cold fusion to enter, update, and insert mainly text and articles. Now the problem with the articles is that some of them are pretty big. And when inserting or updating them, if they go over the limit of characters I get an error.
I know in access I used to use the data type "MEMO" and be able to put a large piece of info in that field.
What's the equivalent for SQL server databe?
What are the most used/common or recommended data types that should be used when putting tables together?
Thanks
George
hi, i'm trying to build an online forum using sql server 2000 and coldfusion mx.
could anybody help me as to what datatypes i should use for my database fields?
i'll be using 2 simple tables to start with, ie TOPICS and POSTS. each will contain fairly basic information such as name of poster, time, data, title, message etc.
any help would be greatly appreciated.
thanx, zaffi.
Which data type do I need to assign to my field to let users enter characters such as +=-_| etc....pretty much every single character from a standard keyboard....
thanks
Hi,
I am pretty new with SQL and was dabbling in a test database that is linked with a software application.
I made a change to a table - Lets call this (Table1).
Table1 has a multiple columns.
Column1 is defined as numeric(9)
Column2 is defined as varchar(20)
In this case, I wanted to make all values in Column2 = Column1 that did not have a value defined so I ran the following query:
update Table1 set Column2 = Column1 where Column2 = ''
This took effect but the particular software application doesn't recognize these values because they are the wrong data type.
How can I convert all data in a column to varchar(20) if it is another data type (i.e. in this case numeric(9))?
I've tried in Enterprise manager to redesign the table and adjusted the length to 21 and then back and saved it but this did not work. I was looking at Convert and Cast functions but don't know how to write one to accomplish what I need to do here.
Half of the data in Column2 is varchar(20) and half is numeric(9).
I want all to be varchar(20).
Thanks,
asyncd
Im comparing values. if i add the values which is numeric or monetary in the column and if it is greater than zero it will insert to a table, but the datatype of my column([Day 30 AMT] etc. is char. i want to implement like these like these because it cant return a result if i query..
FROM tbl1 a LEFT OUTER JOIN tb2 b
ON a.ID = b.ID
WHERE b.ID IS NULL AND
a.[Day 30 AMT] + a.[Day 60 AMT] + a.[Day 90 AMT] + a.[Day 120 AMT] + a.[Day 150 AMT] + a.[Day 180 AMT] + a.[Day 210+ AMT]) > 0
What is the difference between int and numeric data type in sql server 2000. When I should use which?
View 2 Replies View Relatedwhat is the equivalent data type of autonumber of access in sql server?
View 2 Replies View RelatedHi,
I want to store a decimal value which I get from an execute sql task into a package variable. Which data type should I specify when creating the package variable?
Thanks,
Tom
I have successfully made a couple of SSIS packages to read data from a legacy AS400 to SQL Server 2005. These are working fine. I am now working on one that is trying to pull some financial data and I keep getting the following error for the decimal columns:
"The component ciew is unavailable. Make sure the component view has been created. The input column "input column AMT1 (2870) cannot be mapped to "external metadata column AMT1(2852) because they have different data types."
Now I made sure that the data sitting on the AS400 is of type decimal and the SQL server column is the same. What else do I need to look for?
Thanks for the information.
Hello, I am following this article about building an ASP.Net application which uses SQL Express 2005. The document calls for building a couple of tables. One column is identified with data type of "Byte" which are is available for selection within the Visual Studio 2005 interface. The following values show in the drop down of data type in VS2005:
Bigint
Binary(5)
Bit
Char(10)
DateTime
Decimal (18,0)
Float
Image
Int
Money
NChar(10)
NText
Numeric(18,0)
Nvarchar(50)
Nvarchar(max)
Real
SmallDateTime
SmallInt
SmallMoney
Sql_Variant
Text
Timestamp
TinyInt
UniqueIdentifier
Varbinary(50)
VarBinary(max)
varchar(10)
Varchar(max)
XML
I choose Char with a size of 1. Would this be correct, or am I missing something?
Thanks in advance for your assistance!!
Is there some type of resource that tells you what all the Data types are and what they are used for. For example, whats the diffrence between Nvarchar and Char? Things like that. Thanks!
View 1 Replies View RelatedThe problem:I'm updating a report to be "multi-language" capable. Previously,any items that had text associated with them were unconditionallypulling in the English text. The database has always been capable ofstoring multiple languages for an item, however.Desired output:Given the test data below, I'd like to get the following resultsselect * from mytestfunc(1)Item_Id, Condition, QuestionText1876, NOfKids <= 10, This many children is unlikely.select * from mytestfunc(2)CheckID, Condition, QuestionText1876, NOfKids <= 10, NULLThe current SQL for my UDF:CREATE FUNCTION Annotated_Check (@Lang_ID int) RETURNS TABLE AS RETURN (SELECT tblCheck.Item_ID, tblCheck.CheckDescr AS Condition,tblQuestionText.QuestionTextFROM tblCheck LEFT OUTER JOIN tblQuestionText ON (tblCheck.Item_ID =tblQuestionText.Item_ID)WHERE ((tblQuestionText.LanguageReference = @Lang_ID) OR(tblQuestionText.LanguageReference IS NULL)))Test data:CREATE TABLE [dbo].[tblCheck] ([Item_ID] [int] NOT NULL ,[CheckDescr] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CreationDate] [datetime] NULL ,[RevisionDate] [datetime] NULL) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]GOALTER TABLE [dbo].[tblCheck] ADDCONSTRAINT [DF__tblCheck__Creati__0D7A0286] DEFAULT (getdate()) FOR[CreationDate],CONSTRAINT [PK_Check] PRIMARY KEY CLUSTERED([Item_ID]) WITH FILLFACTOR = 90 ON [PRIMARY]GOCREATE TABLE [dbo].[tblLanguage] ([ID] [int] IDENTITY (1, 1) NOT NULL ,[Priority] [int] NULL ,[Name] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,[Spoken] [bit] NULL ,[CreationDate] [datetime] NULL ,[RevisionDate] [datetime] NULL) ON [PRIMARY]GOALTER TABLE [dbo].[tblLanguage] WITH NOCHECK ADDCONSTRAINT [PK_Language] PRIMARY KEY CLUSTERED([ID]) WITH FILLFACTOR = 90 ON [PRIMARY]GOALTER TABLE [dbo].[tblLanguage] ADDCONSTRAINT [DF__tblLangua__Creat__2CF2ADDF] DEFAULT (getdate()) FOR[CreationDate],UNIQUE NONCLUSTERED([Priority]) WITH FILLFACTOR = 90 ON [PRIMARY]GOCREATE TABLE [dbo].[tblQuestionText] ([Item_ID] [int] NOT NULL ,[LanguageReference] [int] NOT NULL ,[QuestionText] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[SameAs] [int] NULL ,[CreationDate] [datetime] NULL ,[RevisionDate] [datetime] NULL) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]GOALTER TABLE [dbo].[tblQuestionText] ADDCONSTRAINT [DF__tblQuesti__Creat__76969D2E] DEFAULT (getdate()) FOR[CreationDate],CONSTRAINT [PK_QuestionText] PRIMARY KEY CLUSTERED([Item_ID],[LanguageReference]) WITH FILLFACTOR = 90 ON [PRIMARY]GOINSERT INTO tblCheck (Item_ID, CheckDescr)VALUES(1876, 'NOfKids <= 10')INSERT INTO tblLanguage (ID, Priority, Name, Spoken)VALUES(1,1,'English', 1)INSERT INTO tblLanguage (ID, Priority, Name, Spoken)VALUES(2,2,'Espanol', 1)INSERT INTO tblQuestionText (Item_ID, LanguageReference, QuestionText)VALUES (1876, 1, 'This many children is unlikely.')Any tips or pointers will be appreciated. Thanks.
View 2 Replies View RelatedI find that dynamic masking does not work on joining tables in SQL Server 2016 CTP2.1.
For examples, I create the following table:
CREATE TABLE [dbo].[HRM_StaffAppointment](
[StaffID] [nvarchar](11) NOT NULL,
[ApptSeqNo] [smallint] NOT NULL,
[ReportingDept] [nvarchar](10) NULL,
[Code] ...
Then I apply mask on StaffID and RankDesc.
alter [dbo].[HRM_StaffAppointment] alter column [StaffID] add masked with (function='default()')
alter [dbo].[HRM_StaffAppointment] alter column [RankDesc]
add masked with (function='default()')
When User A logged in and query on HRM_StaffAppointment, StaffID and RankDesc are perfectly masked. But User A can remove the masking using another table:
CREATE TABLE [dbo].[staffID](
[staffID] [nvarchar](255)Â
) ON [PRIMARY]
select a.*
from dbo.HRM_StaffAppointment as a
left join dbo.staffID as b
on a.StaffID = b.StaffID
It looks like a security hole to me, or I'm doing anything wrong?
Having a slight problem. For whatever reason I had a column setup for nvchar but the only data i have in there is dates (MM/DD/YY) and a whole bunch of NULLs. I wanted to change the datatype to datetime but it gave me an error. I thought it was due to all the NULLs, so I removed all the nulls. It still doesn't work. I get the error : Conversion failed when converting datetime from character string.
I don't belive its because I have the data in mm/dd/yy format. I created another table and populated it with mm/dd/yy data as nvchar (50) and then converted to datetime and it worked fine.
any ideas?
Hey guys,
I have a table with the following information.
A1,A2,A3,A10,A11,A12,A14,A20,A21B1,B2,B3,B10,B11,B12,B14,B20,B21C1,C2,C3,C10,C11,C12,C14,C20,C21Now if I assign this field as a char,varchar,text field then when sorting it turns outA1,A10,A11,A12,A14,A2,A20 etc. So in order to go around this issue, I placed a blank ' ' (space) before the items that are less than 10 so that it'll sort as' A1', ' A2', ' A3' , 'A10' etc. However, now the problem is since the B and C series also have this space it actually sorts as' A1', ' A2', ' A3', ' B1', ' B2' ... 'A11','A12' etc. Now, I know why it is doing that. I'm trying to figure out if there is a solution to this issue. I've considered having two fields instead, one for the letter and another for the number, However, I need to display them together and I also need to do some reporting on these figures, so even if i concatenate the two fields together, it'll be a string field and sort by the same way. Any ideas?