Using MS SQLServer 2000
Is there a way to create a query that will return only 1 row within a join for example:
select a,b,c,d
from tbl1
inner join tbl2 on top 1 tbl2.a = tbl1.a <-- return only the top record here...
I dont have too much of a problem with joins... however I was wondering if there was a mechanism to just specify what would be the top most record from a join clause.
thanks
Kevin
Let me start off with my table layouts.
CREATE TABLE [dbo].[Competition] (
[Id] INT IDENTITY (1, 1) NOT NULL,
[Name] NVARCHAR (150) NOT NULL,
[Remarks] NVARCHAR (350) NULL,
[Start] DATETIME NOT NULL,
[IsActive] BIT NULL,
[End] DATETIME NOT NULL,
[Code] ....
Then here is my query with the problem below. The problem is that multiple EntryImages can relate to a single Entry. My goal is to only select one Row for each Entry (using @EntrySelection) but when I join to EntryImages I always get back multiple rows when an Entry has multiple EntryImages.
Declare@EntrySelection int= 10
select top (@EntrySelection)
[dbo].Entries.Id,
[dbo].Entries.CatchDate,
[dbo].Entries.CompetitionId,
[dbo].Competition.Name,
[Code] ....
have tried joining several tables and the result displays duplicate rows of virtually every line/row. i have tried using distinct but failed miserably.
select purchaseorders.traderid,
suppliers.name
stockbatches.partid,
allpartmaster.partdesc,
allpartmaster.prodgroup,
[code]....
I am still fairly new to SQL, having been tasked with creating a csv file from data now someone else has left.
I can do the csv export using sqlcmd and I have the query sorted and am pulling out the right data, but it generates two rows, as one of the tables has multiple records per cardholder. See the query below, I know there is a way of doing it with XML PATH, I think, but it has got me slightly confused.
set nocount on
selectdbo.card.EncodedNumber,
dbo.card.IsEnabled,
dbo.Cardholder.FirstName,
dbo.cardholder.LastName,
dbo.card.ExpiryTime,
dbo.PersonalDataString.Value
[Code] .....
Greetings!
I need to run a select statement that only returns 50 rows. How do I limit the amount of rows returned? Normally the query will return hundreds of rows but all I need is the first 50 it retrieves. I have looked in the BOL and can only find help with a block cursor not just a query.
Thanks a million
zachary
I have a query set up that returns the data that I would like, but Iwould only like the latest data for each vehicle number. The query Ihave set up isSELECT TOP 100 PERCENT dbo.vwEvents.EventName,dbo.luSessionAll.SessionName, dbo.luOuting.OutingNumber,dbo.luVehicle.VehicleName, dbo.luOuting.OutingID,dbo.tblOutings.OutingStartTime,dbo.tblSessions.Ses sionDate,dbo.tblSessions.SessionStartTimeFROM dbo.vwSessions INNER JOIN dbo.vwEvents ONdbo.vwSessions.Event = dbo.vwEvents.EventIDINNER JOINdbo.luSessionAll ON dbo.vwEvents.EventID =dbo.luSessionAll.Event INNER JOINdbo.luOuting ON dbo.luSessionAll.SessionID =dbo.luOuting.SessionID INNER JOINdbo.luVehicle ON dbo.luSessionAll.Vehicle =dbo.luVehicle.VehicleID INNER JOINdbo.tblOutings ON dbo.luOuting.OutingID =dbo.tblOutings.OutingID INNER JOINdbo.tblSessions ON dbo.tblOutings.[Session] =dbo.tblSessions.SessionIDGROUP BY dbo.vwEvents.EventName, dbo.luSessionAll.SessionName,dbo.luOuting.OutingNumber, dbo.luVehicle.VehicleName,dbo.luOuting.OutingID, dbo.tblOutings.OutingStartTime,dbo.tblSessions.SessionStartTime, dbo.tblSessions.SessionDateORDER BY dbo.luVehicle.VehicleName, dbo.tblSessions.SessionDate,dbo.tblSessions.SessionStartTime, dbo.tblOutings.OutingStartTimethis returns all the outings. I would like the outing that has, inorder of importance, the latest session date, latest session time andlatest outing start time. Outing start time can sometimes be <<Null>>but the other two always have values. How would I go about doing this?thanks in advance for any help
View 2 Replies View RelatedI have a stored procedure below that returns a table of coaches. It worked before now it does not. It returns nothing, in vistual studio 2005 and on my asp.net webpage. But when I execute it in query analyzer with just SELECT * FROM Coaches it returns the rows. There is no error just will not return what I need. I recreated the database and stored procedure still doing the same thing. Any ideas? Would this be on my server hosting side? ALTER PROCEDURE [dbo].[GetCo]ASSELECT * FROM Coaches
View 2 Replies View RelatedHi All:
My below sub in application is returning only the Header Row instead of the relevant rows I guess therez problem in my "str" Syntax. However I fail to understand where exactly is it faultering. Private Sub btnSearch_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSearch.Click
Try
con.Open()Dim empID As String = txtEmpID.Text
Dim FName As String = txtFName.Text
Dim LName As String = txtLName.TextDim str As String = "Select Emp_ID, Emp_FName,Emp_LName,Emp_Address1,Emp_HNo,Emp_MNo from Emp_Details where Emp_ID='" & empID & " ' Or Emp_LName='" & LName & " ' Or Emp_FName=' " & FName & "'"""Dim da1 As New SqlDataAdapter(str, con)
da1.Fill(ds, "Emp_Details")
dgEmp.DataSource = ds
dgEmp.DataMember = "Emp_Details"
dgEmp.DataBind()
Finally
con.Close()
End Try
End Sub
Thanks in Advance for your quick help.
Regards,
Brandy
TotalSelected.Value = SqlDataSource1.SelectCommand = "SELECT COUNT(*) FROM tblNews";
the reason i am tring to do this is so if i can find out the amount of rows before sqldatasource selects for details view then i can make the sqldataesource select depends on total minus 5 so e.g. if total 200 then - 5 so i can select bottom 195 so it misses top 5 for details view any1 any ideas?
Thanks Andy,
Hi,
I created a temporary table inside a stored procedure called TmpCursor and the last time I include this..
Select * from #TmpSummary
GO
Inside my web page, I have the following code...
QrySummary = "Exec TmpCursor"
Set rsSummary = Server.CreateObject("ADODB.RecordSet")
rsSummary.Open QrySummary, cnCentral
cnCentral is my sqlconnection string..
This is the error I got when viewing the page
Error Type:
ADODB.Recordset (0x800A0E78)
Operation is not allowed when the object is closed.
BTW, the stored procedure works fine in Query Analyzer.
TIA
I would like to return the the Primary Key of the row altered from this query - what changes do I need to make?
UPDATE Members SET LastLog = @time WHERE UserName=@user AND Password=@pass;
Thanks in advance,
I was racking my brains trying to figure out why SomeCommand.ExecuteNonQuery() was not returning any rows...
SQL Server 2005 likes to put the SET NOCOUNT ON statement in every stored procedure you write. By hiding the count of records touched by your query, you also disable the results to be consumed by your application.
So I don't recommend using this statement for your stored procedures and ASP.NET applications, as this functionality is fairly critical for error trapping.
This question has been posted on the site before but I could not find any resolution....I want to return rows 11 - 20 from a query that returns 100 records without using a cursor or temp table.
The closest query I have found is a query that numbers the rows, but I can't seem to use rownumber in a between clause...
Use Pubs
SELECT emp_id, lname, fname, job_id,
(SELECT COUNT(*) FROM employee e2 WHERE e2.emp_id <= e.emp_id AND e2.job_id = 10) AS rownumber
FROM employee e
WHERE job_id = 10
ORDER BY emp_id
Thanks,
Jim
I have two tables and I want to return data from both. Currently my select statement is returning just 1 child record for each parent record and I want to return all child records that match the parent record.
Here's a sample of my tables/data/etc.
t1
------------
speciesid | species
1 | Mammals
2 | Rodents
3 | Reptiles
t2
---------
animalid | animal
3 | Skink
3 | Iguana
3 | Rattlesnake
2 | Meerkat
1 | Hippo
1 | Elk
What I want to do is pull up a list of all the species and under each list all the animals currently listed under that species.
So the result I want should look like:
Mammals (Hippo, Elk)
Reptiles (Skink, Iguana, Rattlesnake)
Rodents (Meerkat)
so currently I have:
SELECT A.animalid, S.speciesid, A.animal, S.species from t2 as A, t1 as S where S.speciesid=A.animalid order by species
this works great, it's just that it only returns one animal instead of all of the animals. Any help would be appreciated.
Say you have a table that contains 1000 rows, you create a simple select statement with a where clause that returns 100 or so of those rows. Easy enough.
Now, let's say that you wish to modify that select so that out of the 100 rows that match the where clause criteria, you only wish to return 10 rows randomly (i.e., you could run this query multiple times and get different results). How exactly would you go about doing this, efficiently?
I've thought about creating a stored procedure that will query the initial 100 rows into a temp table with an additional column (to number the rows from 1 to 100). Then setting up a loop (10 iterations) that will then generate a random number from 1 to 100 and select that row number into another temp table. At the end of the loop I'll have my table of randomly selected records. I am sure there is probably a better way to do this...
~Mike
I'm trying to write a query that will return rows within a specified range and print to a Crystal Report. When I run the query, it produces 2 row of everything. I would use the SELECT DISTINCT clause, but Crystal Reports will not let me edit the Select statement. But I can edit the FROM, WHERE and ORDER BY clauses. I think the problem is in my INNER JOINS but I'm having a problem figuring it out. Can someone please guide me in the right direction.
SELECT
DrawingVouchers."PlayerID",
DrawingVoucherNumbers."PromoID", DrawingVoucherNumbers."VoucherNumber", DrawingVoucherNumbers."IssueDate", DrawingVoucherNumbers."UserID",
CDS_PLAYER."LastName", CDS_PLAYER."FirstName",
CDS_ACCOUNT."Address1A", CDS_ACCOUNT."City1", CDS_ACCOUNT."State1", CDS_ACCOUNT."Zip1"
FROM
{ oj (("WinOasis"."dbo"."DrawingVouchers" DrawingVouchers INNER JOIN "WinOasis"."dbo"."DrawingVoucherNumbers" DrawingVoucherNumbers ON
DrawingVouchers."PlayerID" = DrawingVoucherNumbers."PlayerID")
INNER JOIN "WinOasis"."dbo"."CDS_PLAYER" CDS_PLAYER ON
DrawingVoucherNumbers."PlayerID" = CDS_PLAYER."Player_ID")
INNER JOIN "WinOasis"."dbo"."CDS_ACCOUNT" CDS_ACCOUNT ON
CDS_PLAYER."Player_ID" = CDS_ACCOUNT."Primary_ID"}
WHERE
DrawingVoucherNumbers."VoucherNumber" >= 37806 AND
DrawingVoucherNumbers."VoucherNumber" <= 37813
SELECT
[tblSections].[pageTitle],
[tblSections].[sectionURL],
[tblSectionContents].[articleID],
[tblSectionContents].[fileID],
[tblSectionContents].[linkID],
[tblCopy].[copyText],
[tblFiles].[fileName],
[tblFiles].[fileCaption],
[tblGroupings].[grouping],
[tblLinks].[linkURL]
FROM [tblSections]
LEFT JOIN [tblSectionContents] ON [tblSectionContents].[sectionID] = [tblSections].[id]
LEFT JOIN [tblCopy] ON [tblSectionContents].[articleID] = [tblCopy].[id]
LEFT JOIN [tblFiles] ON [tblSectionContents].[fileID] = [tblFiles].[id]
LEFT JOIN [tblGroupings] ON [tblFiles].[groupingID] = [tblGroupings].[id]
LEFT JOIN [tblLinks] ON [tblSectionContents].[linkID] = [tblLinks].[id]
WHERE [tblSections].[id]=2
ORDER BY
[tblSectionContents].[articleID],
[tblSectionContents].[fileID],
[tblSectionContents].[linkID]
If I pass it the ID of a section that has files or copy or [stuff in other tables] attached, then I get a result set that makes sense.
But if I pass it a section ID that doesn't reference any other content tables (ie: the section just has a title and a link URL), I don't get anything back.
Shouldn't it should still get me the fields from the row in tblSections that matches the ID I'm passing it?
How can I make it so that it does?
Thanks :)
I can't even think how I would go about beginning to solve this problem, so any tips/pointers would help immensely.
I'm running a query that builds a time line of a process using messages in a table called Event. The Event table is joined with a table called Charge_Info based on N_Charge, the charge number. It builds the time line by looking in the Message field for various text strings that signify a specific point has been reached in the process and builds a record for each charge number with data from N_Charge and timestamps from the events table.
The problem I have is that there aren't records for every event in the Event table, ie, for every charge that doesn't have a "Heating Complete" event, the returned recordset has no mention of that charge. The system recording these events is pretty much crap, but there's nothing to be done about that right now. What I want to happen is for the query to return every record in N_Charge and a null string or NULL in place of the non-existing events.
The stored procedure is pasted below. I pass the dates I want and select from the Event table into a temporary table and then do the join/text search on that table. It helped performance tremendously compared to the text search searching all 400,000+ records in the Event table and then doing the date select.
Thanks for any help in advance,
TimC
SELECT EVENT.Time_Stamp, EVENT.N_CHARGE, EVENT.Message
INTO #EVENT_FILTERED
FROM EVENT
WHERE (EVENT.TIME_STAMP >= @StartDate) AND (EVENT.TIME_STAMP < @EndDate)
SELECT CHARGE_INFO.TIME_STAMP, CHARGE_INFO.N_CHARGE, CHARGE_INFO.BASE,
CHARGE_INFO.N_RECIPE, CHARGE_INFO.N_FCE, CHARGE_INFO.N_CH,
CHARGE_INFO.HEIGHT, CHARGE_INFO.CREW_EOC, CHARGE_INFO.CREW_SOC,
CHARGE_INFO.TIME_START, CHARGE_INFO.TIME_FCE_SET,
CHARGE_INFO.TIME_FCE_IGNITED, CHARGE_INFO.TIME_FCE_REMOVED,
CHARGE_INFO.TIME_CH_SET, CHARGE_INFO.TIME_CH_REMOVED,
CHARGE_INFO.WEIGHT, CHARGE_INFO.TIME_POST_PRG_COMPLETE,
EVENT.TIME_STAMP AS IC_Set,
EVENT_1.TIME_STAMP AS Cycle_Started,
EVENT_2.TIME_STAMP AS Leak_Test_Done,
EVENT_3.TIME_STAMP AS End_N2_PrePurge,
EVENT_4.TIME_STAMP AS Heating_Complete,
EVENT_5.TIME_STAMP AS Split_Temp_Met,
EVENT_6.TIME_STAMP AS End_N2_Final_Purge,
EVENT_7.TIME_STAMP AS Inner_Cover_Removed,
EVENT_8.TIME_STAMP AS Cycle_Complete,
EVENT_9.TIME_STAMP AS Post_Purge_Time_Met
FROM dbo.CHARGE_INFO CHARGE_INFO LEFT OUTER JOIN
#EVENT_FILTERED EVENT_9 ON CHARGE_INFO.N_CHARGE = EVENT_9.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_7 ON CHARGE_INFO.N_CHARGE = EVENT_7.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_6 ON CHARGE_INFO.N_CHARGE = EVENT_6.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_8 ON CHARGE_INFO.N_CHARGE = EVENT_8.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_5 ON CHARGE_INFO.N_CHARGE = EVENT_5.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_3 ON CHARGE_INFO.N_CHARGE = EVENT_3.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_1 ON CHARGE_INFO.N_CHARGE = EVENT_1.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_4 ON CHARGE_INFO.N_CHARGE = EVENT_4.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_2 ON CHARGE_INFO.N_CHARGE = EVENT_2.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT ON CHARGE_INFO.N_CHARGE = EVENT.N_CHARGE
WHERE (EVENT.MESSAGE LIKE '%Inner Cover Set%') AND
(EVENT_1.MESSAGE LIKE '%Cycle Started%') AND
(EVENT_2.MESSAGE LIKE '%Leak Test Done%') AND
(EVENT_3.MESSAGE LIKE '%End of N2 PrePurge%') AND
(EVENT_4.MESSAGE LIKE '%Heating Complete%') AND
(EVENT_5.MESSAGE LIKE '%Split Temp Met%') AND
(EVENT_6.MESSAGE LIKE '%End N2 Final%') AND
(EVENT_7.MESSAGE LIKE '%Inner Cover Removed%') AND
(EVENT_8.MESSAGE LIKE '%Cycle Complete%') AND
(EVENT_9.MESSAGE LIKE '%Post Purge Time Met%') AND
(CHARGE_INFO.TIME_STAMP >= @StartDate) AND
(CHARGE_INFO.TIME_STAMP < @EndDate)
ORDER BY CHARGE_INFO.BASE, CHARGE_INFO.TIME_STAMP DESC
Is there a way to allow the count () to return a 0 for the rows with a NULL value instead of not returning that row?
View 15 Replies View RelatedHeres my problem, the first part selects a row from the database, ifthere is no row with the criteria it inserts a row and then returns it,the problem is the IF statement that inserts the row, never returns theselect after it. if there is a row initially in the database, itreturns the right information, I just can't get it to return the rowafter inserting it. Anyone know what the problem could be?Stored procedure:ALTER PROCEDURE dbo.CheckCurrentPayPeriod(@UserID varchar(50))ASBEGIN-- This SP checks to see if the current PayPeriod exists,-- if not it will create the payperiod for them and returnDECLARE @appStartDate DATETIMEDECLARE @dt DATETIMEDECLARE @rows intSET @appStartDate = (SELECT PayPeriodStart FROM PayPeriodStart)SET @dt = GETDATE()SELECTUserIDFROMPayPeriodWHERE(PeriodStart <= CONVERT(varchar(10), @dt, 101)) AND (PeriodEnd >=CONVERT(varchar(10), @dt, 101)) AND (UserID = @UserID)-- Inserts their new PayPeriodDECLARE @PayPeriodID intif (@@ROWCOUNT = 0)BEGINDECLARE @sDate datetimeDECLARE @eDate datetimeSET @sDate = @appStartDateSET @eDate = DATEADD(day, 13, @sDate)INSERT INTOPayPeriod(UserID, PeriodStart, PeriodEnd)VALUES(@UserID, @sDate, @eDate)/*EXEC @PayPeriodID = InsertPayPeriod @UserID, @sDate, @eDate*/SET @PayPeriodID = @@IDENTITYSELECT * FROM PayPeriod WHERE PayPeriodID = @PayPeriodIDRETURNENDelseRETURNEND
View 1 Replies View RelatedI've been tearing my hair out over this UDF. The code works within astored procedure and also run ad-hoc against the database, but does notrun properly within my UDF. We've been using the SP, but I do need aUDF instead now.All users, including branch office, sub-companies and companies and soon up the lines are in the same table. I need a function which returnsa row for each level, eventually getting to the master company all theway at the top, but this UDF acts as though it can't enter the loop andonly inserts the @userID and @branchID rows. I have played with theWHILE condition to no avail.Any ideas on what I am missing?(Running against SQL Server 2000)---------------------------------------------------ALTER FUNCTION udfUplineGetCompany (@userID int)RETURNS @upline table (companyID int, companyname varchar(100), infovarchar(100))ASBEGINDECLARE @branchID intDECLARE @companyID intDECLARE @tempID int--Insert the original user dataINSERT INTO @uplineSELECT tblusersid, companyname, 'userID'FROM tblusersWHERE tblusersid = @useridSELECT @branchID = tblUsers.tblUsersIDFROM tblUsersINNER JOIN tblUsersUsersLnkON tblUsers.tblUsersID = tblUsersUsersLnk.tblUsersID_ParentWHERE tblUsersUsersLnk.tblUsersID_Child = @userid--Up one levelINSERT INTO @uplineSELECT tblusersid, companyname, 'branchID'FROM tblusersWHERE tblusersid = @branchidSET @tempID = @branchIDWHILE @@ROWCOUNT <> 0BEGINSELECT @companyID = tblUsers.tblUsersIDFROM tblUsersINNER JOIN tblUsersUsersLnkON tblUsers.tblUsersID = tblUsersUsersLnk.tblUsersID_ParentWHERE tblUsersUsersLnk.tblUsersID_Child = @tempIDAND tblUsersId <> 6--Insert a row for each level upINSERT INTO @uplineSELECT tblusersid, companyname, 'companyID'FROM tblusersWHERE tblusersid = @companyIDSET @tempID = @companyIDENDRETURNEND
View 2 Replies View Related
This is probably very elementary to someone more experienced, but I'm having a hard time coming up with a way to do the following:
SELECT * FROM Transactions
WHERE MyField LIKE (SELECT MyValues FROM SearchValues)
But I can't because the subquery will return multiple rows. That's all I'm really trying to do - search all the rows in Transactions.MyField for any of the search values returned from the subquery.
And I can't restructure the SearchValues table to combine them into a single-row comma-delimited field or anything like that.
Any help would be appreciated-
Kenneth
Hi,
I have the following table
JobID JobType JobName ParentJobID etc...
12345 Disconnection MyJob1
98475 New Pilot MyJob2 12345
85746 Streetlight MyJob3 98475
etc
I need a query that returns all the jobs that relate to a specific job
e.g if I pick 12345 I get the following:
12345 Disconnection MyJob1
98475 New Pilot MyJob2
85746 Streetlight MyJob3
As they are all related records.
Can anyone help
Thanks
If stored procedure A EXECUTEs stored procedure B, and stored procedure B does a select statement which returns a dataset, how does stored procedure A access that data ?
View 12 Replies View RelatedLately I noticed that I cannot return any rows using enterprise manager. The version I am using is MS-SQL 7.0 with SP 1 on NT. This will return an error:-
An unexpected error happened during this operatation.
[Query]-Query Designer encountered a query error.
Unspecified error.
I can return rows using another computer with enterprise manager installed.
Any help appreciated.
Tony
I am trying to run queries on a table (table has zero rows). Inspite of giving 0 rows returned the query keeps on running and I have to cancel it. I tried inserting a dummy row into the table but even the insert operation is taking too long.Every query which I hit on the table just keeps on running without giving any result.
But this is not the case with other tables in the database.They are all running fine giving proper results. But this one table is behaving funny.
Hi,I have the following stored procedure that does some processing andputs the result in a temporary table. I tried several things thatprocedure to display output that I can access with ADO.Net, but itdoesn't work. It doesn't even display the result in the query analyzerunless I add SELECT @ReturnFullNameAny help?The stored procedure:CREATE PROCEDURE sp_SEARCH_MULTIPLE_NAMES @search4fatherOfvarchar(255), @maximum_fathers int = 100, @ReturnFullName varchar(255)Output....SELECT @ReturnFullName = name FROM #FULLNAME------------------------------------------------To Execute the stored procedure:DECLARE @test varchar(255)EXEC sp_SEARCH_MULTIPLE_NAMES @search4fatherof='مريم',@returnfullname=@testPRINT CONVERT(varchar(255), @test)
View 5 Replies View RelatedHi,In the process of localizing the 'regions' table, we added three newtables. The localized data will be stored in the TokenKeys andTokenValues tables. It would be easier if we did away with theTokeyKeys/TokenValues tables and just added a localeid in the regionstable, but this is the desired schema by the client. Here's theschema:Table: regionsid nameabbreviation1 United StatesUSTable: localesid locale1 en_US2 fr_CATable: TokenKeysid key1 db.regions.name2 db.regions.abbreviationTable: TokenValuesid keyid valuelocaleid1 1 Etas Unis22 2 EU2The old sql was simply this:select name, abbreviation from regionswhich returns:United States, USBut the new sql needs to link in the localized data from the tokeykeysand tokenvalues tables using the localeid... I’m trying to figure outwhat the sql statement would look like to return this:Etats Unis, EU (This is supposed to be the French version)My confusion is we are trying to return multiple column values fromthe same column (TokenValues.value) and make them act as separatecolumns in the same record, like it was with the original.Thanks
View 1 Replies View RelatedI have a stored procedure which return a single value and one which return multiple rows between two colums.
In my code for the procedure which returns a single value i use (executescalar) which works fine.
I am not sure what command to use in my code when i am calling the stored procedure that returns multiple rows between colums.
Any help would be appreciated.
Thanks.
I wish to call a custom code function from a table control that would return rows of data to be displayed in the table. Is this possible?
Specifically, I'd like to pass a large text string to the function, have the function break the string into smaller strings, and then have the smaller strings displayed in the table. The number of lines returned may vary, depending on the original string passed in.
Hello,
I have an external process that polls message rows from a table. apon taking them, it also needs to mark them as taken. there is a status column in the table. marking messages as taken will change the value of status.
How can i perform both these operations in one command? Select the top x rows where their status is equal 1, then update the status of those same rows to a value of 5 for example.
I could iterate through the result of hte intial select and change the status 1 by 1 using a cursor, but this seems like a slow option.
Any other ideas?
Thank you.
Hi,
I Have created a stored procedure to use full text search and return the results back,
When i run this procedure in the query analyzer it is working fine, but when i run this procedure from asp.net application, it is returning zero rows.
I have checked all the parameters and everything in my web application, there is nothing wrong in there.
Another stored procedure which almost do the samething with some different parameters is working fine on both ends.
I am using Sql server 2005 (express) + VS.NET 2005. and using ASPNET to connect to database.
Thanks in advance for any suggestions.
I have had at least 2 occurences of a DFT OLEDB source returning the correct number of rows but all rows are empty (they contain zeros or ''). This has happened in two different places in different SSIS packages within an ETL task. In one case the source was on a different server running SQLServer and in the other it was a different database on the same server as the SSIS package. This occured running on different servers, one with SQL 2005 SP2 and the other without. Both are 64 bit AMD systems running 64 bit SQL 2005. As there is a derived column transformation that has performed the derivation on the blank columns I assume the problem is with the OLEDB source but it could be with the data stream from the OLEDB source to to whatever follows. Has anyone else had this problem and does anyone know of a fix?
View 7 Replies View Related