What is the syntax of left triming characters seperated by space.
e.g elsie reed
and i want elsie to go to one field and reed in another field i do not want to use numbers because they don't all have the same numbers but are all seperated by spaces
Guys,
I need to cleanup a query on Item Numbers.
I don't want to edit the data... just display it clean.
I want to show ItemNumbers without any 'S' on the left, and without any '501' or '601' on the right.
What do you think is my best bet fot getting this?
I was thinking about using TRIM, but maybe that's just for whitespace.
I have a table PLACE with a character column CODE
[Code] [nchar](4) NULL
I need to left pad the column with 0 if it is less than 4 characters long and extract the first 2 characters on the left into a new column COUNTY_CODE.
How can I do that in transact SQL?
I tried:
   Â
SELECT Â RIGHT(RTRIM('0000'+ISNULL([Code],'')),4) Â Â Â
  FROM [Place]
  WHERE [Place Code]='B' and [Code]='627'
And I got 0627. And how do I extract the first 2 characters?
How to remove space left to right and right to left
If I give limit >60 for first 60 character; limit 60< second 60 character
Result would be check if space at 60 character if yes remove and go the 59 character check then space remove and 58 character check if there is charater then display
As well as after 60 character to till 120 for right space
Anyone know why using
SELECT *
FROM a LEFT OUTER JOIN b
ON a.id = b.id
instead of
SELECT *
FROM a LEFT JOIN b
ON a.id = b.id
generates a different execution plan?
My query is more complex, but when I change "LEFT OUTER JOIN" to "LEFT JOIN" I get a different execution plan, which is absolutely baffling me! Especially considering everything I know and was able to research essentially said the "OUTER" is implied in "LEFT JOIN".
Any enlightenment is very appreciated.
Thanks
-- Why is the left table in a LEFT JOIN limited by the where clause on the right table?eg
DECLARE @LeftTable TABLE (LeftID INT NOT NULL IDENTITY(1, 1), LeftValue INT NULL)
INSERT @LeftTable (LeftValue)
VALUES (111)
INSERT @LeftTable (LeftValue)
VALUES (222)
[code]....
is there a function trimming string such as Trim in vb?
View 2 Replies View RelatedIN ACCESS
UPDATE 14_Together_final_ICNs INNER JOIN 14_Together_UniqueSKUs ON [14_Together_final_ICNs].SKU = [14_Together_UniqueSKUs].SKU SET [14_Together_final_ICNs].sku_desc = [14_Together_UniqueSKUs].NewDesc
WHERE (((Trim(Nz([NewDesc])))<>""));
THIS IS WHAT I TRY IN SQL SEVER BUT GET A DIFFERNET RESULT
UPDATE [14_Together_final_ICNs]
SET sku_desc = [14_Together_UniqueSKUs].NewDesc
FROM [14_Together_final_ICNs] INNER JOIN
[14_Together_UniqueSKUs] ON [14_Together_final_ICNs].SKU = [14_Together_UniqueSKUs].SKU
WHERE (RTRIM(LTRIM([14_Together_final_ICNs].sku_desc))<> N'')
Guys/Girls
Have a small problem I have received a load of data in a flat file format and each column has dividend up with a comma. I have stuck the whole row in to its own column.
What I want to do is take the first 12 characters of the row and put them in there own column.
I think I need to use the Len function or the trim function, so can some body point me in the right direction on how to do this.
Regards Lee
Okay basic question from the village idiot. How do I return only the date and not the time from a datetime column and also can I return only a set number of digits in a float column?
Thanks in advance peter
The Yak Village Idiot
Hi I have the below paragraph in my datacolum called 'Description'
Ansmann Powerline 5 Super Fast Charger, Microprocessor controlled desktop charger with discharge function for up to 5 NiCd/NiMH cells, For all NiCd and NiMH rechargable batteries including AA/AAA/C/D/9V, Negative Delta V control, faulty cell detection, defined predischarge, trickle charge, separate status indicator for every charging slot, ultra rapid charging, 230V AC. For UK use. Price for 1 Charger.
How do I take only the sentence upto the first comma in my STORED procedure
(ex:Ansmann Powerline 5 Super Fast Charger)
Advance thanks
Vaishu
hello
for MS SQL 2000, i cannot get it
i am having names like AB_12 I want to get all rows with left part similar , AB im that case
SELECT id, name
FROM Users
WHERE LEFT(name, CHARINDEX('_', name) - 1) AS name IN
(
SELECT LEFT(name, CHARINDEX('_', name) - 1) AS ns
FROM Users
GROUP BY LEFT(name, CHARINDEX('_', name) - 1)
HAVING (COUNT(*) > 1)
)
does not work
is there any way to use a variable ?
declare @nm nvarchar
set @nm = SELECT LEFT(name, CHARINDEX('_', name) - 1) AS ns
FROM Users
thank you for helping
we need to cut the aprostrophe out of a name (ie...o'brien, o'leary) to create userid's... can this be done....thanks!
View 1 Replies View RelatedWhat is the best way to trim a string to the space in a select statement? An example string would be:
'asdf and hjkl'
The result would be:
'asdf'
hi guys,
i need to update a column by trimming the right end. i tried many things but its not working. can anyone tell me?
Regards,
David
OK, the problem is like this; say the table is sumthing like this
i have a table 't3' has 3 fields
id(number,2)
date(date/time)
text(varchar,200)
eg. id date text
-----------------------
01 05-jul-07 abcdefghijkl (i want to get rid of the first 6 characters i.e. abcdef)
i want to display 'text' field from t3 table but with the first 6 characters trimmed/removed (i want to get rid of the 6 first characters)
so i did:
select LTRIM(text,6) from t3
but the above code didn't work because LTRIM only trims spaces NOT characters... Is there any way that i can trim off the first 6 characters from every record in the 'text' field?
In my report, i have a TextBox which retrieve the result from the database.I am using this code :
=Fields!Category.Value.ToString().Trim(" ").TrimEnd(",").TrimStart(",")
But i am encountering a problem,wherein,when the value contains '&' (ex. Jog & Hop)
the result became Jog&Hop.
What could be wrong with my trim???
Thanks!!
"select RTrim(columName) from tableName"
it can change the stirng " abc" to "abc". But I want change the string "a bc" to "abc".
Why the TRIM cannot work ?
How do I do ?Thanks.
Whan using the TRIM() function in a SELECT we are getting an invalid function error. What gives? I thought TRIM() was T-SQL & not one of Microsoft's SQL "extras".
Thanks!
can any one explain how to trim a value on bothside in rss
for eg:
'asd '
' asd'
i wanna this output 'asd'............
can i give this command
=Format(Fields!company.Value.Trim)
I need the values as below using select query of my column.
I need to find the text after the first space ' ' and before the first '('
Source Column
==================
0636 KAVITHI (LOC)
0638 SRI KRISHNA (NAT)
0639 SELVAM
0643 GOOD SERVICE (LOC)
0644 FINA CARE EVENT (LOC)
Expected Result
==================
KAVITHI
SRI KRISHNA
SELVAM
GOOD SERVICE
FINA CARE EVENT
I’m trying to optimize the following view so that it runs faster and to trim the code where possible. It runs for 1:57mins. Is that good or it can run much faster than that? Where do l start? It’s a view for a report. Please help l’m running on SQL 2000
CREATE View SalesTest AS
SELECT dbo.Loan.loan_No AS [Loan No], dbo.Customer.customer_No AS [Customer No], dbo.Customer.first_Name + ' ' + dbo.Customer.surname AS Customer,
dbo.Employer.employer_Name AS [Employer Name], dbo.Loan.store AS [Store No], dbo.Store.store_Name AS Store,
dbo.Region.region_Description AS Region, dbo.Financier.financier_Short + dbo.Term.term_Description AS Product,
dbo.Loan.date_Issued AS [Transaction Date], dbo.Loan.capital_Amount AS [Capital Amount], dbo.Loan.interest_Amount AS [Interest Amount],
dbo.Loan.interim_Interest_Amount AS [Interim Interest Amount], dbo.Loan.interest_Amount + dbo.Loan.interim_Interest_Amount AS [Interest2 Amount],
dbo.Loan.insurance_Amount AS [Insurance Amount], dbo.Loan.admin_Fee AS [Admin Fee], dbo.Loan.total_Amount AS [Total Amount],
dbo.Loan_Type.loan_Type_Description AS [Loan Type Description], dbo.Loan.user_Changed AS [User], dbo.Loan.first_Payment AS [First Payment],
dbo.Loan.monthly_Payment AS [Monthly Payment], dbo.Loan.repayment_Period AS [Repayment Period],
dbo.Loan.outstanding_Amount AS [Outstanding Amount], dbo.Loan.last_Payment_Date AS [Last Payment Date],
dbo.Status.status_Description AS Status, CONVERT(Char(3), dbo.Loan.loan_No, 1) AS Company, dbo.Customer.physical_Address1 AS Mine1,
dbo.Customer.physical_Address2 AS Mine2, dbo.Customer.physical_Address3 AS Mine3, dbo.Loan.maturity_Date AS [Maturity Date],
dbo.Agent.agent_Short AS Agent, dbo.Financier.financier_Short AS Financier, dbo.Loan.product AS [Loan Product],
dbo.Deduction_Detail.teba_Account_No AS [Teba Account No]
FROM dbo.Loan INNER JOIN
dbo.Customer ON dbo.Customer.customer_No = dbo.Loan.customer_No INNER JOIN
dbo.Status ON dbo.Status.status = dbo.Loan.status INNER JOIN
dbo.Store ON dbo.Store.store = dbo.Loan.store INNER JOIN
dbo.Product ON dbo.Product.product = dbo.Loan.product INNER JOIN
dbo.Product_Type ON dbo.Product_Type.product_Type = dbo.Product.product_Type INNER JOIN
dbo.Financier ON dbo.Financier.financier = dbo.Product_Type.financier INNER JOIN
dbo.Term ON dbo.Term.term = dbo.Product.term INNER JOIN
dbo.Employer ON dbo.Employer.employer = dbo.Customer.employer INNER JOIN
dbo.Region ON dbo.Region.region = dbo.Store.region INNER JOIN
dbo.Loan_Type ON dbo.Loan_Type.loan_Type = dbo.Product_Type.loan_Type INNER JOIN
dbo.Agent ON dbo.Agent.agent = dbo.Product_Type.agent INNER JOIN
dbo.Deduction_Detail ON dbo.Loan.customer_No = dbo.Deduction_Detail.customer_No AND
dbo.Loan.deduction_No = dbo.Deduction_Detail.deduction_No
WHERE (dbo.Loan.outstanding_Amount <> 0)
Is it possible to use a TRIM(){or similar} function when JOINing 2 tables via a NVARCHAR field in T-SQL?
I need to trim the field first because some of the data contains trailing spaces (GRRR) and so might future data...
I have a SQL table which has field data like below
field a field b
123 KB 246 kb
How can I strip out just the numbers(there will always be a space between the number and KB?
Thanks
hi I have this field
invoice#
007500
190000
000080
I need to run a query to trim the left zeros out and have the following output
invoice#
7500
190000
80
how can I do that in sql select ... or with update table set invoice#=..??
Thanks for your help
Al
I have a table with a keyword field. In this keyword field some of the entries have a space before the word and some don't.
How can I remove all of the spaces from the fields that have them and not trim from the ones that don't.
In a table I have a coulmn of postal-codes where there is a space in the middle of the postcode. How do I do to trim them away?
View 6 Replies View Relatedstr1 has some space in front of it and after it.
trim(str1) does not seem to work.
what is the right syntax for that?
Thanks
For a bulk insert is there a way to trim the data that comes in with a fixed length of say 45 characters but only 14 used and the rest is all spaces?
View 1 Replies View RelatedMy records are like this.
Col1
-----
00001
03456
00577
05011
00099
01090
I want to remove the zeros on the left and the answer should be like this.
Col1
-----
1
3456
577
5011
99
1090
How to trim the leading zeros.
Thanks.
I cannot believe that there is yet another version of SQL Server without a TRIM function. So for SQL 2005 (like I've done in 7.0 and 2000) my T-SQL will look like dog poo because I will have to write LTRIM(RTRIM(MyValue)) anytime I want to remove whitespace from both ends of character values instead of just writing TRIM(MyValue).
View 15 Replies View RelatedThis is a very weird issue, and I can't seem to pinpoint the actual cause. I have a dynamic expression for Excel files that gets evaluated at run-time. One of the parameters for creating this path is pulled from the database - the column is nvarchar(10) and most of the values are only 2-characters long. I have tried LTRIM(RTRIM()) inside SQL Server as well as TRIM() in SSIS's Expression Editor, but nothing seems to work. At run-time the package fails, and the error I receive is because the value that gets pulled from the DB has trailing spaces. What's even annoying is the package runs fine on my XP machine, but fails on a W2K3 box - both setups are using the same back-end database.
Is this is a bug, or am I just screwing up something unknowingly? Thanks.
I have values in a matrix takin too much space. Since they are just used as the matrix column header, cant i trim it or something. To display just the first 3 letters of the the attribute, and not the whole string? Whats the code for that?
=Fields!Collision_Type.Value thats my field right now.
Please help! thanks!