I have a query that doesn't work when i use 4 name convention instead of a openquery. The msg is below. Anyone know what is going on?
Both queries are the same but one doesn't work.
-- works
SELECT TOP 1 * FROM OPENQUERY(AS400_PROD, 'SELECT * FROM PPTREASUSA.ORDDET')
-- doesnt work
SELECT TOP 1 * FROM AS400_PROD.S1030Y3M.PPTREASUSA.ORDDET
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'MSDASQL' reported an error.
[OLE/DB provider returned message: Unspecified error]
[OLE/DB provider returned message: [IBM][iSeries Access ODBC Driver][DB2 UDB]CPF5715 - File ORDDET01 in library QTEMP not found.]
OLE DB error trace [OLE/DB Provider 'MSDASQL' IDBSchemaRowset::GetRowset returned 0x80004005: ].
I'm pretty new to DTS, so forgive me if this is basic. I created a simple DTS package to run a query and export it to a text file. I can execute the package fine from my workstation through EM, but when I try to execute the job to run the package I get this error: Error = -2147467259 (80004005) Error string: Error opening datafile: Access is denied.
I think that maybe SQL Agent doesn't have the right permissions to write to that network drive. What should the permissions be?
This is probably very simple, but I can't get passed this problem.
I have a report in MS Access that uses info generated by a query. One of the text fields in the query contains either the word 'Select' or the name of a course. The report should display a space if the value is 'Select', or the actual value of the field in any other case. The field can never contain a null value.
I've used: =IIf([optVoc1]="Select","",[optVoc1]) in the text box on the report, but this only returns #error regardless of the actual content of the field.
I create and schedule a SQL job to run every minute to update a table base on certain condition but it doesn't work. Job history says successful every time but the table doesn't get updated.
However if I move it to Query Analyzer and run it under dba, it will work. Thinking that it may have to do with the user the job run as, I then change run as user from self to dba. But still SQL job won't update my table.
Anything about user permission or security that I can check? Or it there any other possibility?
When I run the select its fine but I cannot delete..... i have done this many times and it has worked.... I cannot see the error what am i missing
select eqnow.empnumber, eqnow_names.empnumber, eqnow_names.names --delete from eqnow inner join eqnow_names on eqnow.empnumber = eqnow_names.empnumber where eqnow_names.names is null
i get this error Server: Msg 156, Level 15, State 1, Line 4 Incorrect syntax near the keyword 'inner'.
When I try to install the problem I get the following error.
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The log tells me nothing useful. I can't start the thing manually because after clicking cancel on the error message, the installer proceeds to roll back the installation.
This is the autogenerated code from the SelectCommand of my DataAdapter, except the red text. This DataAdapter is used to fill a DataGrid. What I want to do, is to calculate the total memory (4 slots) / PC.This code makes the sum of all memory of all PC's together.I'm not sure if the group by clause is needed here ...Me.OleDbSelectCommand1.CommandText = "SELECT PC.ID, PC.Nummer, PC.Netwerknaam, Case_Type.Type AS Case_Type, Processor_T" & _"ype.Type AS Processor_Type, Processor_Snelheid.Snelheid AS Processor_Snelheid, " & _"(SELECT SUM(Memory) FROM Memory, PC, RAM WHERE RAM.PcID = PC.ID AND RAM.GrootteID = Memory.ID)" & _"AS Memory, OS.Naam AS OS, OS_SP.Nummer AS OS_SP, Gebru" & _"iker.Naam AS Gebruiker_Naam, Status.Status, PC.Tagged FROM (Status RIGHT OUTER J" & _"OIN ((((((((PC LEFT OUTER JOIN (RAM LEFT OUTER JOIN Geheugen ON RAM.GrootteID = " & _"Geheugen.ID) ON PC.ID = RAM.PcID) LEFT OUTER JOIN Case_Type ON PC.Case_TypeID = " & _"Case_Type.ID) LEFT OUTER JOIN OS_SP ON PC.OS_SpID = OS_SP.ID) LEFT OUTER JOIN Ge" & _"bruiker ON PC.GebruikersID = Gebruiker.ID) LEFT OUTER JOIN Processor_Snelheid ON" & _" PC.Processor_SnelheidID = Processor_Snelheid.ID) LEFT OUTER JOIN Processor_Type" & _" ON PC.Processor_TypeID = Processor_Type.ID) LEFT OUTER JOIN OS ON PC.OsID = OS." & _"ID) LEFT OUTER JOIN Switchbox_Details ON PC.ID = Switchbox_Details.PcID) ON Stat" & _"us.ID = PC.StatusID) GROUP BY PC.ID, PC.Nummer, PC.Netwerknaam, Case_Type.Type, " & _"Processor_Type.Type, Processor_Snelheid.Snelheid, OS.Naam, OS_" & _"SP.Nummer, Gebruiker.Naam, Status.Status, PC.Tagged"I would like to know how to calculate the total memory for each separate PC.Hope you can help me.
I try to copy a DB from one server to another. On the target server an older version of the DB has been deleted and I now try to attach the new version using "sp_attach_db DBname, Filelocation", but I always get an error "Device Activation error. The physical file name 'D:mssql7dataAgency_log.ldf' may be incorrect" "Database 'Agency' cannot be Created"
To me it seems that the database is looking for the log files (now deleted). I've tried forcing a new log file I created using the same locations for the mdfs. I've tried using create a new database and replace the mdf file, but nothing works.
I wanted to create a new trigger, but Enterprise Manager tells me about an "Incorrect syntax near @UpdatedByID, line 28". I double-checked everything, but it still does not work :mad: .
Any hints :confused: ?
TIA,
-Gernot
Here is the statement (line 28 is marked with ***):
CREATE TRIGGER TransferToABII ON [dbo].[CALGeneral] FOR INSERT AS BEGIN TRANSACTION BEGIN DECLARE @Event varchar(255), @BBaseUID int, @StartDate smalldatetime, @EndDate smalldatetime, @Details varchar(255), @AddressID int, @ProjectID int, @UpdatedByID int, @ActID int, @EventID int
BEGIN EXEC BrainBase.dbo.BB_NEW_CREATE_NoteTask_Ret *** (@UpdatedByID, @AddressID, @ProjectID, @BBaseUID, @StartDate, GetDate(), @Event, NULL, NULL, NULL, NULL, @Details text, @ActID = @ActID OUTPUT, @EventID = @EventID OUTPUT) END BEGIN UPDATE CALGeneral SET ActID = @ActID WHERE ID = INSERTED.ID END END
IF @@ERROR <> 0 BEGIN RAISERROR('Error occured',16,1) ROLLBACK TRANSACTION END COMMIT TRANSACTION
I'm combining first name, last name, middle name, and an ID number together into an alias. Then I need to match that alias with a variable passed to the page (its a search results page). The problem is it claims that there is no table with the name of my alias. Anyone know what I'm doing wrong?
A mockup of the SQL looks like this:
SELECT UserID, Last_Name + ', ' + First_Name + ' ' + Middle_Name + '.' AS name FROM Table WHERE name LIKE 'variable%'
Everything looks right with the results, if I take out the WHERE clause it has name displayed properly and joined together with the rest of the data in the results properly.
Thanks in advance for any help that can be provided!
hi all, i made a stored procedure that uses the sp_send_dbmail to send mails. SQL server dislays the message "mail queued" but nothing is recieved
here is the code of the stored procedure i made EXEC msdb.dbo.sp_send_dbmail @profile_name = 'Exams', @recipients = 'me@domain.com', @Body_format = 'HTML' , @subject = 'Room Preparation' , @body='hi there'; so can anyone help with this issue thanks in advance
I have a drill through that passes four parameters. Three are passed from the current selections in that reports parameters and the fourth needs to be the customer name they click on in the body of the report so it's passed as Fields!fieldname.Value. When I click on the customer name, the drillthough fires but the report simply doesn't load. If I remove the parameter from the field clicked on and just pass the three parameters, it goes to the drill through correctly and that fourth parameter just sets to the default for that parameter in that report.
I can then simply check that parameter and select the value from the list that is exactly the same as the value I was attempting to pass it in the drill through and report refreshes correctly.
Whatever it is, is something in the manner that the value is passed in the drill through specifically.
Hello, I've rescued a MDF and LDF files off a client's old server, and I wanted to attach it to our own, but I can't seem to get the command to work, basically I have these two files, which I've dropped on our server:
So when I do a SP_ATTACH_SINGLE_FILE_DB 'somedb','C:Program FilesMicrosoft SQL ServerMSSQLDataMYCLIENTNAME_Data.MDF'
It says the LDF path my be incorrect, and that there's two other files that are missing: MYCLIENTNAME_LOG (no extension) extra_log (no extension)
I thought the whole point of the command is that you only need a single file? Its very hard to go back to the client's old server and try to find these two files, and it doesn't really matter if we loose a bit of data, so long as the bulk of it is available.
Update: I think I've found the answer...its not possible to do this, it really needs all the log files. Any workarounds?
I have been looking at this for over a day now. I cannot see why this procedure does not work, its so simple. No matter what happens it always returns 0. If it locates a record, it doesnt update it, yet it still returns 0. It should not be returning 0 if its not updating so I can't figure out why it does. Why does this always return 0? [pre]Create Procedure CreateNewCategory @title nvarchar(100), @description nvarchar(1000), @displayOrder intAS DECLARE @Result as int IF EXISTS(SELECT categoryTitle FROM categories WHERE categoryTitle = @title) BEGIN SELECT @Result = 1 ENDELSE BEGIN INSERT INTO categories(categoryTitle, categoryDescription, displayOrder) VALUES(@title, @description, @displayOrder) /* If no error was encountered, 0 will be returned. */ SELECT @Result = @@Error ENDGO[/pre] Thanks!
Since I have to go across the network, I'm trying to use the UNC. However, this won't even work when I'm using the UNC to point to the server on which this is run. I'm trying to restore a single table on 6.5. What is the obvious piece that I'm missing?
This works.
LOAD TABLE address FROM DISK = 'd:MSSQLackupDBBackup.DAT' WITH source='address'
This doesn't.
LOAD TABLE address FROM DISK = 'server1d$MSSQLackupDBBackup.DAT' WITH source='address'
Hello, I upgraded to Beta 3 and now mail isn`t working(I hate mail!) I found 2 error messages. One when trying to add an operators email id and the other when I try to "test" mail under server properties.
- Unable to start a mail session on the server with this mail profile.
- no mail profile defined.
The account that I am using is used for all our SQL Servers and was working on this server on 6.5 before the upgrade. I have checked the new SQLServerAgent service and it`s using the correct account.
Any help would be appreciated.
And to all you that are off for a long Labor Day weekend...I`m jealous!
Hi all, I have a problem with this trigger. It seams to be very simple, but it doesn't work...
I created a trigger on a table and I would want that this one updates a field of a table on a diffrent DB (Intranet). When I test it normally (a real situation), it doesn't work, but when I do an explicit update ("UPDATE AccesCard SET LastMove = getDate();" by example) it works.
If anyone could help me, I would appreciate.
NB: Is there a special way, in a trigger, to update a table when the table to update is on another BD ?
Francois
This is the trigger: ------------------------------------------------------------
ALTER TRIGGER UStatus ON AccesCard AFTER UPDATE, INSERT AS
DECLARE @noPerson int
SET NOCOUNT OFF
IF UPDATE(LastMove) BEGIN SELECT @noPerson = Person FROM INSERTED UPDATE Intranet.dbo._Users SET Intranet.dbo._Users.status = 1 WHERE personNo = @noPerson; END
I have the following situation: A webserver in a DMZ which connects to a DbServer in a Domain.
but when I try to make a ODBC connection on the webserver I get the well-known "Server does not exist or access denied" error.
I tried using IP address as well as FQDN. I turned off the firewall in the router (I'm able to access shares and what not from the webserver so the firewall is really turned off).
I think however i have narrowed down the problem to the TCP/IP connection of the SQL Server. Normally when you try from a command prompt "telnet dbserver 1433" you get a connection. But when I try this to the specific DbServer I get an "unable to connect" error. Even when I try it on the dbserver itself (so telnet localhost 1433). This should work always?
In the network configuration of the sql server the Named Piped as well as the TCP/IP protocols are enabled. TCP/IP is offcourse configured on port 1433.
Hi again, all...here I am again, trying to work on my CloseIndex thang again...Same subject, different tack...
Basically, I have two tables...for the sake of simplicity, let me define them as:
PortfolioIndex PortfolioID int CreateDate smalldatetime CloseIndex float
PortfolioPerformance PortfolioID int CreateDate smalldatetime PrevDate smalldatetime DailyPerChg float
UPDATE PortfolioIndex SET CloseIndex = CASE WHEN PPI.CloseIndex IS NULL THEN 100.00 ELSE (PPI.CloseIndex + (PPI.CloseIndex * PP.DailyPerChg / 100)) END FROM PortfolioIndex AS P INNER JOIN PortfolioIndex AS PPI on (P.PortfolioID = PPI.PortfolioID), PortfolioPerformance AS PP WHERE (P.PortfolioID = PP.PortfolioID) AND ((P.CreateDate = PP.CreateDate) AND (P.CreateDate = @CreateDate) AND (PPI.CreateDate = PP.PrevDate))
What I am trying to do is...get the previous day's portfolioIndex row's CloseIndex and create a new one for today's row.
As ugly as it is, it works when I execute it in the SQL Query Analyzer, but when I try to create the stored procedure, the syntax check complains that the PortfolioIndex reference at the UPDATE... part is AMBIGUOUS...yet when I define it in the SP as P.PortfolioIndex, it fails at run time saying there is no object named P.PortfolioIndex (well, of course there isn't!).
How can I make this work (and if possible, make it prettier too! *L* ;) )
I need to write a stored procedure the passes in a fieldname, retrives next key type int data from that field, increments the field, and returns the NextKey.
Would be nice if something like this worked: DECLARE @iNext INT SELECT @iNext = SELECT @columnName FROM Next_Keys WHERE ID = 1 SELECT @iNext = @iNext +1 UPDATE Next_Keys Set @columnName = @iNext WHERE ID = 1 RETURN @iNext
SQL Server 2000 - Win Server 2003 Editing SP from VS2005 TSQL newbe writing first sp"
***Disclaimer*** This is homework, just need a hint.
I compare this to other scripts and can't find any differences. I'm getting a syntax error:
Msg 102, Level 15, State 1, Line 4 Incorrect syntax near '('. Msg 102, Level 15, State 1, Line 3 Incorrect syntax near '('. Msg 102, Level 15, State 1, Line 3 Incorrect syntax near '('.
Any hints would be great! Thanks.
USE StateUBookstore
ALTER TABLE dbo.Classes ADD( InstructorID char (5) NOT NULL, Credits int NOT NULL); GO
ALTER TABLE dbo.Students ADD( PhoneNO char(14) NULL, Email char (50) NULL), DROP COLUMN BookStoreEmp; GO
ALTER TABLE dbo.Enrollment ADD( Semester int NOT NULL, EndDate DateTime NOT NULL);
I setup a maintenance plan in SQL and added some vbscript codes. One line is just wscript.sleep 10000. When I tried to run the job, I received error description: variable is undefined: 'wscript'
The UpdateTrackingCS program will call a stored procedure to get the inserted data and update other databases. And the reason to put the commit statement in sql2000 is to have sql commit the transaction, so the store procedure in UpdateTrackingCS can query thtat inserted records.
When I use the same code in SQL2005, no matter what I do the UpdateTrackingCS program cannot query the data by the UPSID. It always says record not found.
I have tried to change commit to begin trans ... commit trans. But nothing works. Please help!
The UpdateTrackingCS program will call a stored procedure to get the inserted data and update other databases. And the reason to put the commit statement in sql2000 is to have sql commit the transaction, so the store procedure in UpdateTrackingCS can query thtat inserted records.
When I use the same code in SQL2005, no matter what I do the UpdateTrackingCS program cannot query the data by the UPSID. It always says record not found.
I have tried to change commit to begin trans ... commit trans. But nothing works. Please help!
Using the Query Analyzer, I issued the statement "EXEC xp_sendmail'anyone@hotmail.com, 'Test.'" and received 'email sent' confirmation.But, my email was never received.I used the same statement to send mail to a Yahoo account and it wasreceived.Is there a way to be able to send email using SQL xp_sendmail to aHotmail account?Thank you very muchmike
