Local Variables In Case Statment
Nov 11, 2004
Hi
I am trying to use a global variable in a case when and am not getting the correct results. If I use static data, it works fine.
Here is a tableless example, which should return Shipper. Any ideas are appreciated.
Code:
declare @shipperGBS varchar(3000)
declare @sQuote char
set @sQuote = char(39)
set @shipperGBS = 'ACI,ADO,ALD,AMS,AWB'
set @shipperGBS = Replace(@shipperGBS, ',', @sQuote + ',' + @sQuote)
set @shipperGBS = @sQuote + @shipperGBS + @sQuote
select case when ('ACI' IN (@shipperGBS)) then 'Shipper' else 'Consignee' end as ClientCharge
View 1 Replies
ADVERTISEMENT
Apr 7, 2008
Hi There i have a query that uses conditional Select statment my query is:
Select A,B,C case
when '1' then 'one'
when '2' then 'two'
end
from table
what if i want to include addional condition in the case condition like C case
when '1' and A is null then 'C is one and A is null'
Thank you :D
View 3 Replies
View Related
Oct 30, 2007
I am trying to have all these calulcation int one column under AccessFeeFinal, but it is not working. It was working when I just had the one case statement, but we needed to add another one in because we were getting some blank info in the column. Below are the two statement then I added a third on to show you how I think it should be, but it is not working for me. Please help me out if you can. I was thinking maybe I needed to use an IF Statement.
CASE clm_att1
WHEN 'NG' THEN (clm_H30)*(clio_fee04/100)
WHEN 'NA' THEN '0.00'
WHEN 'AF' THEN (clm_H30)*(clio_fee04/100)*.65
ELSE Null
END as AccessFeeFinal,
CASE clm_att1
WHEN 'NG' THEN (clm_sppo)*(clio_fee04/100)
WHEN 'NA' THEN '0.00'
WHEN 'AF' THEN (clm_sppo)*(clio_fee04/100)*.65
ELSE Null
END as AccessFeeFinal,
CASE clm_att1
WHEN 'NG' THEN (clm_H30)*(clio_fee04/100)
WHEN 'NG' THEN (clm_sppo)*(clio_fee04/100)
WHEN 'NA' THEN '0.00'
WHEN 'AF' THEN (clm_H30)*(clio_fee04/100)*.65
WHEN 'AF' THEN (clm_sppo)*(clio_fee04/100)*.65
ELSE Null
END as AccessFeeFinal,
Thanks
Wendy
View 5 Replies
View Related
Oct 18, 2007
Any ideas why i am getting an error
set dateformat YMD
set datefirst 7
CREATE TABLE #ChildSessions (
siteid integer null
,childid integer null
,sessionid integer null
,sun integer default 0
,mon integer default 0
,tue integer default 0
,wed integer default 0
,thr integer default 0
,fri integer default 0
,sat integer default 0)
declare @firstofweek as datetime
declare @lastofweek as datetime
--select datepart(dw,getdate())
select @firstofweek=cast(floor(cast(dateadd(day,(-1*datepart(dw,getdate())+1),getdate()) as float)) as datetime)
select @lastofweek=dateadd(minute,-1,dateadd(day,7,@firstofweek))
declare @myday integer
set @myday=0
while @myday<7
BEGIN
INSERT INTO #childSessions
SELECT
c.siteid
,c.childid
,sg.sessionid
,case @myday WHEN 1 THEN 1 ELSE 0 end
,case @myday WHEN 2 THEN 1 ELSE 0 end
,case @myday WHEN 3 THEN 1 ELSE 0 end
,case @myday WHEN 4 THEN 1 ELSE 0 end
,case @myday WHEN 5 THEN 1 ELSE 0 end
,case @myday WHEN 6 THEN 1 ELSE 0 end
,case @myday WHEN 7 THEN 1 ELSE 0 end
FROM
child c
,sessionAttendance sa
,session s
,sessiongroup sg
WHERE
c.childID = sa.childid
AND c.siteid = sa.siteid
AND c.active = 1
AND c.potential = 0
AND s.identityid = sa.identityid
AND s.siteid = sa.siteid
AND sg.sessionid = s.sessionID
AND sg.siteid = s.siteid
AND s.dayofweek = @myday
AND @firstofweek <= sa.dateTo
AND @lastofweek >= sa.dateFrom
SET @myday=@myday+1
END
SELECT
c.forename,
c.surname,
sg.sessionname,
CASE (sum(sun)) WHEN 0 THEN ' ' ELSE 'X',
CASE (sum(mon)) WHEN 0 THEN ' ' ELSE 'X',
CASE (sum(tue)) WHEN 0 THEN ' ' ELSE 'X',
CASE (sum(wed)) WHEN 0 THEN ' ' ELSE 'X',
CASE (sum(thr)) WHEN 0 THEN ' ' ELSE 'X',
CASE (sum(fri)) WHEN 0 THEN ' ' ELSE 'X',
CASE (sum(sat)) WHEN 0 THEN ' ' ELSE 'X'
FROM child c,sessiongroup sg,#childsessions cs
WHERE c.childid=cs.childid
AND c.siteid=cs.siteid
AND sg.sessionid=cs.sessionid
AND sg.siteid=cs.siteid
GROUP BY c.forename,c.surname,sg.sessionname
ORDER BY sg.sessionname,c.forename,c.surname
DROP TABLE #childsessions
Msg 102, Level 15, State 1, Line 66
Incorrect syntax near ','.
View 3 Replies
View Related
May 13, 2008
HI,
I have a problem with using CASE in my database,
Here is the code that I am using but not working
SELECT Computers.[Computer ID], Computers.Model, Computers.[Dell Service Tag], Users.[First Name] CASE WHEN Users.[first name] is NULL THEN Users.[user ID] ELSE Users.[First Name]+' '+Users.[Last Name] AS NAME ENDFROM Computers INNER JOIN Users ON Computers.[Computer ID]=Users.[Computer ID]ORDER BY Users.[First Name];
Could you please tell me where is wrong?Thanks in advance,Azi
View 1 Replies
View Related
Feb 6, 2008
I have this case statement below it is for an access fee. My problem that I am having is that now I am getting a number that is huge. Example, 8.2350000000. I need this to be rounded up and numbers srinked to 8.24, how can I add that in my case statement below? Please help if you can.
Thanks
CASE clm_att1
WHEN 'NG' THEN CASE clm_h30 WHEN 0 THEN cast(clm_sppo as decimal(12,2))*(cast(clio_fee04 as decimal (12,2))/100)
ELSE cast(clm_H30 as decimal(12,2))*(cast(clio_fee04 as decimal (12,2))/100)
END
WHEN 'NA' THEN '0.00'
WHEN 'AF' THEN CASE clm_h30 WHEN 0 THEN cast(clm_sppo as decimal(12,2))*(cast(clio_fee04 as decimal (12,2))/100)
ELSE cast(clm_H30 as decimal(12,2))*(cast(clio_fee04 as decimal (12,2))/100)*.65
END
ELSE Null
END AS AccessFeeFinal,
View 2 Replies
View Related
Mar 18, 2005
hi,friend
is it possible to use 'select case' statment in sql query.
give any idea or solution.
thanks in advance.
View 2 Replies
View Related
Feb 25, 2008
I have a case statement I need to refer to several times in my select statement and it's quite long. I would like to just refer to if by name. I tried to create a variable for the Case statement (see below) but I get an error that says, "
Sub query returned more than 1 value. This is not permitted when the sub query follows =, !=, <, <= , >, >= or when the sub query is used as an expression."
USE GP05
GO
DECLARE @EmpID nvarchar (6)
SET @EmpID = (SELECT CASE WHEN NOT(dbo.BE010130.EMPID_I IS NULL) THEN dbo.BE010130.EMPID_I
WHEN dbo.BE010130.EMPID_I IS NULL AND NOT(dbo.UPR00500.EMPLOYID IS NULL) AND dbo.UPR00600.EMPLOYID IS NULL THEN dbo.UPR00500.EMPLOYID
WHEN dbo.BE010130.EMPID_I IS NULL AND dbo.UPR00500.EMPLOYID IS NULL AND NOT(dbo.UPR00600.EMPLOYID IS NULL) THEN dbo.UPR00600.EMPLOYID
WHEN dbo.BE010130.EMPID_I IS NULL AND NOT(dbo.UPR00500.EMPLOYID IS NULL) AND NOT(dbo.UPR00600.EMPLOYID IS NULL) THEN dbo.UPR00500.EMPLOYID
END FROM dbo.BE010130 FULL OUTER JOIN dbo.UPR00500 ON dbo.BE010130.EMPID_I = dbo.UPR00500.EMPLOYID AND dbo.BE010130.BENEFIT = dbo.UPR00500.DEDUCTON
FULL OUTER JOIN dbo.UPR00600 ON dbo.BE010130.BENEFIT = dbo.UPR00600.BENEFIT AND dbo.BE010130.EMPID_I = dbo.UPR00600.EMPLOYID)
SELECT @EmpID
I can get around this by simply retyping the case statement when I refer to it in the where clause, but I would prefer not to do this. Can someone point a newbie in the right direction? I have 5 case statements in this query and it starts to look pretty ugly when you have to retype them multiple times.
Thanks!
View 9 Replies
View Related
Sep 25, 2006
declare @Id integer
set @Id=1145
select '@'+'Id'
result: @Id
But I want the result to be 1145. Is it possible, If so please let me know how.
Thanks
Suresh
View 5 Replies
View Related
Jun 12, 2008
quote:list the first and the last name of the employee with a name of Thomas. Use local variables for the first name and the last name and the @@ROWCOUNT command.
SET NOCOUNT ON
DECLARE @variable varchar(50)
SET @variable = 'name'
SELECT @variable = fname + ' ' + lname
FROM employee
WHERE @variable = '%Thomas%'
IF @@ROWCOUNT > 0
PRINT 'Employee Name is ' + @variable
ELSE
PRINT 'Employee not found'
when i execute it, it said employee not found. what do i need to add or revise?
it should be:
quote:Employee Name is Argon Thomas.
View 5 Replies
View Related
Aug 1, 2007
how do i get text local variables in a stored procedures? cos i was thinking of doing a log to log what my SP did or not do.
View 4 Replies
View Related
Feb 4, 1999
I have an installation script and want to create a database based on some data in a table (config). Testing the script though I get a message:
Msg 170, Level 15, State 1
Line 12: Incorrect syntax near '@DBData'.
The relevant sql is:
declare @DBName varchar (40)
declare @DBData varchar (40)
declare @DBLog varchar (40)
declare @DBSize int
select @DBName = obj_txt from config where obj_nm='DBName'
select @DBData = @DBName + '_Data'
select @DBLog = @DBName + '_Log'
select @DBSize = obj_int from config where obj_nm='DBSize'
raiserror('Creating Database %s ....',0,1,@DBName) with nowait
Create Database @DBName
on @DBData = @DBSize
Log on @DBLog = @DBSize
I don't think there's anything wrong, apart from the fact I am using the local variables. Is this allowed on a Create Database statement? I haven't found anything in Technet that may help.
Here's hoping....
Thanks
Dan
View 1 Replies
View Related
Nov 23, 2006
Hey guys, needless to say I'm new at this.
What I'm trying to accomplish is to execute a SQL string via exec and inside it set the value of a local variable. I understand that I cannot do this the way I'm currently doing it because an Executed string runs in a scope of its own so local variables are invisible. And sure enough this is the error I get. So how do I make this work?
Code snip:
declare @ErrMessage as varchar(1000)
set @Sql = 'if exists ( select * from ' + @TargetTable + ' where (' + @ValueField + '=' + '''' + @NewValue + ''''
set @Sql = @Sql + ' and ' + @TagField + '= ' + '''' + @Tag + '''' + '))' + @CRLF
set @Sql = @Sql + 'set @ErrMessage = ''Insertion could not be performed. ' + @NewValue + ' is already an entry in the table. '''
So what I want is check if a certain table has entries...what table? I don't know, there are tens that this check will apply to. And if that tavle has an entry that satisfies the where clause then assign the appropriate error message to @ErrMessage.
I understand sp_executesql might do the trick because it allows passing local params back and forth.
Any ideas on how to make this work? I appreciate the effort.
View 3 Replies
View Related
Jul 23, 2005
How do you declare and then SELECT a value for a local variable withinstored procedure, increment the value and then use in an Insertstatement? ThanksAny sites that explain this syntax for SQL Server 2000? Thankshals_leftCREATE PROCEDURE [dbo].[InsertQualUnit]@QualRef tinyint,@UnitRef tinyint,@UnitGroupRef tinyint,// this needs to be a local var not an output param, how ?@UnitPosition tinyint OutputAS// Assign a value to the the variable from a SELECT query, how ?SELECT @UnitPosition= SELECT MAX(UnitPosition) FROM tblUnitGroupWHERE QualRef=@QualRef AND UnitRef=@UnitRef ANDUnitGroupRef=@UnitGroupRef// inc the value@UnitPosition+=1// Use the new value in another SQL statementINSERT INTO tblQualUnits ( QualRef, UnitRef, UnitGroupRef ,UnitPosition )VALUES ( @QualRef, @UnitRef, @UnitGroupRef , @UnitPosition)GO
View 4 Replies
View Related
May 7, 2008
I have a function that returns a table of matching names. For the most part it returns under 5,000 results which doesn't cause too much lag joining to the search report data (which is indexed). But sometimes there might be 10,000 + search name results. I find this and higher can cause excessive lag joining. Is it possible to index this result table from the function? Or any other suggestions?
THANKS
View 8 Replies
View Related
Nov 2, 2006
Can someone show how to do this?I have a SqlDataSource1, and i have a SELECT * FROM Table1How would i get@ProdName@ProdNumber Into the following local variablesString ProductNameInt ProductNumber I’m using C# and ASP 2.0 VWDThanks for Help1
View 2 Replies
View Related
Mar 24, 2004
I'm having a problem declaring variables in UDFs. Are they allowed? Can someone send me some syntax to see what I am doing wrong?
View 4 Replies
View Related
Dec 12, 2005
Friends,I would just like to know that why SQL Server doen't allow us to definea text data type local variable while creating trigger?I tried creating a text variable in a trigger as a local variable andit raises error."Implicit conversion from data type text to nvarchar is not allowed.Use the CONVERT function to run this query".For this i have to use convert function in MS SQL Server.-ThanksBhavin Vyas
View 1 Replies
View Related
Jul 20, 2005
Is there ANY data type other than varchar that is valid for localvariables and allows more than 8000 characters?
View 3 Replies
View Related
Mar 18, 2008
I have a stored procedure where I gather some data and then insert the data into a table variable. I then attempt to go through each row of the table variable, asign the values to local variables to be inserted into other tables. However, the local variables show as NULL.BEGIN
DECLARE @tblcontact table
(
SOKey int,
Cntctkey varchar(60),
Cntctownerkey int,
LASTNAME varchar(32),
FIRSTNAME varchar(32),
WORKPHONE varchar(32),
EMAIL varchar(128),
processed int DEFAULT 0
)
INSERT INTO @tblcontact (SOKey, Cntctkey, Cntctownerkey, LASTNAME, FIRSTNAME, WORKPHONE, EMAIL)
SELECT ...
DECLARE @ID int,
@sokey int,
@cntctkey int,
@cntctownerkey int,
@name varchar(65),
@email varchar(128),
@phone varchar(32)
WHILE EXISTS (SELECT * FROM @tblcontact WHERE processed = 0)
BEGIN
SELECT @ID = MIN(SOKey) FROM @tblcontact WHERE processed = 0
SELECT @cntctkey = (CAST(LTRIM(REPLACE(Cntctkey,'CN',' '))AS int)),@cntctownerkey = Cntctownerkey, @name = FIRSTNAME + ' ' + LASTNAME, @phone = WORKPHONE, @email = EMAIL, @sokey = SOKey
FROM @tblcontact
WHERE @ID = SOKey AND @cntctkey <> '43778'
INSERT INTO tciContact (Cntctkey, Cntctownerkey, CreateType, EMailAddr, EmailFormat, EntityType, ExtUser, Name, Phone, UpdateCounter)
VALUES (@cntctkey, @cntctownerkey, '0', @email, '3', '401', '0', @name, @phone, '0')
UPDATE tsoSalesOrder
SET Cntctkey = @cntctkey, UserFld4 = 'temp'
WHERE SOKey = @sokey
UPDATE @tblcontact
SET processed = 1 WHERE @ID = SOKey
END
END
View 4 Replies
View Related
Jul 3, 2003
I would like to know if there is a penalty for Varchar variables in stored procedures if I declare them Varchar(8000) instead of Varchar(1000).
I have a lot of variables and sometimes the content will be more them 1000 characters.
Is memory only allocated for the the actual contents or for the complete declared length?
View 2 Replies
View Related
Aug 18, 2004
I am brand spankin new to stored procedures and don't even know if what I want to do is possible. From everything I've read it seems like it will be. I have a table, punchcards. In this table are all the punch in/out times for a week. I want to create a stored proc to calculate how many hours a punchcard entry is.
Thats the dream.
The reality is that I can't even get a tinyint from a table to load to a variable and be printed out. I am using sql server 8.
Here is what I have as of this moment for my sp.
ALTER PROCEDURE usp_CalculatePunchcard
AS
DECLARE @dtPP DateTime
SET @dtPP = (SELECT thursday_in1
FROM punchcards
WHERE (punchcard_id = 1))
/*
Also tried....
SELECT @dtPP=thursday_in1
FROM punchcards
WHERE (punchcard_id = 1)
*/
PRINT @dtPP
RETURN
/*
for some reason i can't use GO ... even though every
document i've read on stored procedures has used GO
and none use RETURN
*/
The only output this is producing is ' Running dbo."usp_CalculatePunchcard". '
Any help would be greatly appreciated as I am about to kick someone/something.
Thanks
View 2 Replies
View Related
Jan 18, 2008
Hi all
I have two tables I need to Select the record from the First table and insert them into the second table and delete the record from the first table how can i do that with the SQL Statment?
Thank you in advance .....
Regards,
sms
View 15 Replies
View Related
Oct 2, 2007
We have a 64-bit VM server running SQL Server 2005. The SQL Server on this particular VM server has 6 local instances installed. On the Management Studio logon screen I can type the full name of the local instance and connect to it, however if I press the drop down in the Server name field, choose Browse and select the Local Servers tab there is nothing listed under Database Engines.
Any idea why the 6 local instances don't show up under Database Engines? This is preventing me from installing a vendor application because their installer looks for local SQL Server instances on this server, but if SQL Server won't even show the local instances then the installer doesn't see them either.
Any help is greatly appreciated.
Thanks,
Craig
View 3 Replies
View Related
Sep 4, 2006
Hi,
I am not comfortable with DTS 2000 but I need to execute a encapsulated DTS 2000 package from a SSIS package. The real problem is when I need to pass SSIS variables to DTS 2000 package. The DTS 2000 package have 3 global variables that I can identify on " Execute DTS 2000 Package Task Editor - Inner Variables ". I believe the SSIS variables must be mapped on " Execute DTS 2000 Package Task Editor - OuterVariables ". How can I associate the SSIS variables(OuterVariables ) to "Inner Variables"? How can I do it? Much Thanks.
João
View 8 Replies
View Related
Jan 24, 2006
Hi,
I would like to design a SSIS package, which have couple of variables. It loads a xls file specified in a variable [varExcelFileFullPath] .
I will run it by commands: exec xp_cmdshell 'dtexec /SQL ....' (pls see an example below).
It seems it does not get the values passed in for those variables. I deployed the package to a sql server.
are there any grammar errors here? I copied it from dtexecui. It worked inside Dtexecui not in dos command.
exec xp_cmdshell 'dtexec /SQL "LoadExcelDB" /SERVER test /USER *** /PASSWORD ****
/MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW
/LOGGER "{6AA833A1-E4B2-4431-831B-DE695049DC61}";"Test.SuperBowl"
/Set Package.Variables[User::varExcelFileName].Properties[Value];"TestAdHocLayer"
/Set Package.Variables[User::varExcelWorkbookName].Value;"Sheet1$"
/Set Package.Variables[User::varExcelFileFullPath].Value;"D: estshareTestAdHocLayer.xls"
/Set Package.Variables[User::varDestinationTableName].Value;"FeaturesTmp"
/Set Package.Variables[User::varPreSQLAction].Value;"delete from FeaturesTmp"
'
thanks,
Guangming
View 2 Replies
View Related
Jun 7, 2006
I am facing a problem in connecting to the local database with server name as (local).
I have installed SQL Server 2005 in my machine. When I try to connect to the SQL server with the server name as SUNILKUMAR I am able to connect but when I try to connect to the same server with the server name as (local) I am not able to connect. SUNILKUMAR is my machine name and SQL server is running locally.
if anyone can help me what is the problem in this case it is highly appriciated.
View 7 Replies
View Related
Dec 21, 2005
Hi Everyone
I am at the stage of architecting my solution
My goal is to develop the system on a windows application and pda
There is a central server which will create a publication called inventory
The laptops which host the windows application will be subscribers to the central server using merge replication
The client now wants the PDA using SQL Mobile to synchronize with the local subscirber database on the laptop using active sync. They dont want to do it via WIFI to the IIS Server at the central server
I have been reading for days and I am still unsure whether this is possible to do.
I know Appforge provide a conduit for palm to access synchronization but not local sql databases
I would appreciate your help immensley
View 7 Replies
View Related
Aug 31, 2015
How can I change my T-SQL text editor from text sensitive to text insensitive?
View 2 Replies
View Related
Jan 6, 2005
Hello:
I have created an SQL server table in the past on a server that was all case sensative. Over time I found out that switching to a server that is not case sensative still caused my data to become case sensative. I read an article that said you should rebuild your master database then re-create your tables. So after rebuilding the master database, a basic restore would not be sufficient? I would have to go and manually re-create every single table again?
Any suggestions?
View 4 Replies
View Related
May 4, 2007
Can someone point me to a tutorial on how to search against a SQL Server 2000 using a case insensitive search when SQL Server 2000 is a case sensitive installation?
thanks in advance.
View 3 Replies
View Related
Aug 17, 2005
We need to install CI database on CS server, and there are some issueswith stored procedures.Database works and have CI collation (Polish_CI_AS). Server hascoresponding CS collation (Polish_CS_AS). Most queries and proceduresworks but some does not :-(We have table Customer which contains field CustomerID.Query "SELECT CUSTOMERID FROM CUSTOMER" works OK regardless ofcharacter case (we have table Customer not CUSTOMER)Following TSQL generate error message that must declare variable @id(in lowercase)DECLARE @ID INT (here @ID in uppercase)SELECT @id=CustomerID FROM Customer WHERE .... (here @id in lowercase)I know @ID is not equal to @id in CS, but database is CI and tablenames Customer and CUSTOMER both works. This does not work forvariables.I suppose it is tempdb collation problem (CS like a server collationis). I tried a property "Identifier Case Sensitivity" for myconnection, but it is read only and have value 8 (Mixed) by default -this is OK I think.DO I MISS SOMETHING ????
View 4 Replies
View Related
May 29, 2008
I am working in a SQL server database that is configured to be case-insensetive but I would like to override that for a specific query. How can I make my query case-sensitive with respect to comparison operations?
Jacob
View 5 Replies
View Related
