Login Failed For 'sa' After Transactional Replication
Feb 5, 2001
Hi all,
I hope someone who knows how to fix the following problem could shed some light:
I have set up a two-way transactional replication between two SQL 7.0 servers. The updates and inserts on server A is successfully replicated to server B. But when I tried to test if changes on server B is replicated onto server A, I got a 'login failed for user 'sa'' when I modified a user table. It sounds strange because I already logged in using 'sa' and all SQL servers use the same 'sa' login. I wonder if it is a Microsoft bug. The same problem happened on a pair of SQL 2000 Enterprise servers.
Transactional replication running via a pull subscription between a single subscriber and single publisher on Windows 2000 servers (all current service packs and patches) with SQL Server 2000.
Early on Sunday morning, the server hosting the publisher was rebooted...but SQL Server Agent failed to start fully, causing the log reader agent to not start and no alerts to trigger. Still trying to isolate the cause of the problem with SQL Server Agent, as it's been problematic to keep it up and running. For the most part, though, it's coming up properly after restarts of the service or reboots, and starting all agents/functions.
However, the snapshot agent ran a number of times pulling schema and batch copies for the articles in the replicated dataset, and the distribution agent now fails each time it runs with a reference to "not having the initial snapshot for the publication available". SQL Server Agent went down before this could complete, and I left it down until I could ascertain the best route to take...
Any chance I can circumvent having to reapply a initial snapshot of the publication db (this is a large set of data), and just apply transactions from the log since my downtime has only been about 60 hours? Or is there an agent setting, job run to reinitialize, or an inherent quality to SQL Server Agent that will demand a complete reapplication of the snapshots due to the down time?
I'm betting that the distribution agent will start moving data as soon as the snapshot agent finishes up (as I said, it has not completed yet), but I'm praying there's a way to get around this...
Now, I am getting closer and receiving the following message in the Distribution Task (repl_subcriber is the owner, AutoStart is the Frequency):
"37000[Microsoft][ODBC SQL Server Driver][SQL Server] Login failed - User: Reason: Not Associated with a trusted SQL Server connection."
I have 'sqlexecutivent' and 'pswd' defined on the CA (Publisher) and VA (Subscriber) Servers. I have 'sqlexecutivent' defined in the NT Administrator group on both machines. I have trusted the NT Administrator group to SQL Server on both machines (xp_grantlogin 'administrator', 'admin'). I have trusted the NT 'sqlexecutivent' login to SQL Server on both machines (xp_grantlogin 'sqlexecutivent', 'admin'). I have logged-in to both NT machines using the 'sqlexecutivent' login and 'pswd'. I have started the MSSQLServer Service and SQLExecutive Service using 'sqlexecutivent' and 'pswd'. When I set up the Topology, Publication, and Subscription I was registerred in SEM as 'sa'. I do not know if this is needed, but in SQL Server I also created 'sqlexecutive' logins and 'sqlexecutive' database users on both machines.
Please tell me what I am missing. Do I need to do anything with the repl_subscriber and repl_publisher login ids? Do I need to configure a DSN? Do I need to check anything in the registry? Maybe I need to just start over again with a fresh start by uninstalling the Replication Topology, Publishing, etc. Maybe I should try Multi-Protocol.
Again, these are two NT 4.0, SP3 machines running SQL Server 6.5 SP5a. They are set up in the same Workgroup. I can connect to both machines in SEM and by Mapping a Network Drive. The default netlibrary is set to named pipes.
As part of my appreciation for your efforts, I will document this process and mail it to you once it is working.
I have been attempting to set up replication between two 6.5 servers in the same domain, and all I get is a login failed error on my replication task. Both servers use standard security and an admin login for the server and exec service, and I am using the default remote server setup as installed with replication. I'm sure it will be something simple, but I can't see it. Thanks in advance for any help you can offer.
hi, so i have a new box and I'm trying to get my websites and SQL Server 2005 Standard Edition working on it, but the pages give me the following error when I try to load them: "Cannot Open Database "XXXX" requested by login. The login failed. Login failed for user 'xxx'" Everything seems exactly the same settings and user-wise from my old box to my new one, but nevertheless everything I've tried gives me the same error. I've tried creating new users in SQL Server and giving them appropriate permissions to my database. I've even tried just using the built in 'sa' account. Nothing seems to change the error, except when I give it the incorrect password then it just says 'login failed' This leads me to believe that i'm successfully logging into the SQL Server, but it doesn't want to give me access to the database I'm requesting access too. But "apparently" the account i'm using should have access to the database. If nothing else the 'sa' account should, but that didn't work either. I'm stumped. Any ideas?
Replication-Distribution: Task 'CAServer_Page_VAServer_InPage' failed. 3700[Microsoft][ODBC SQL Server Driver][SQL Server] Login Failed - User: Reason: Not associated with a trusted SQL Server connection.
I checked under the SQL Security Manager, View, SA Privilege and my sqlexecutivent login is set up as:
CAServersqlexecutivent sa
Thanks in advance for any tips you can give me with this. Both servers are set up in a workgroup. We are not using Domains.
Also, should my table already exist on the Subscribing Server?
We have a SQL 2000 Active/Passive cluster running on Windows 2000. On one node, everything logs in fine (second node is powered off). I can use local authentication fine in OSQL (-E) and even see my connection in SQLEM current activity as [DomainUser] for the NT account which I am logged in as. Then I bring the second node online and initiate a failover. SQL Server starts but Cluster Admin cannot connect and starts throwing this Anonymous Logon error. I open a command prompt and try the same OSQL (-E) local login and sure enough it is also giving the Anonymous Logon connection user. I do not understand why the failover to a second node is causing the Trusted Connection Local authentication to switch to Anonymous instead of the [DomainUser] which I am using. Any help is appreciated. John.
I'm interested in combining the Peer-to-Peer Transactional Replication and Standard Transactional Replication to provide a scale out solution of SQL Server 2005. The condition is as follows:
We may have 10 SQL Server 2005 (1 Publisher + 9 Subscriber) running transactional replication in the production environment and allow updates in subscribers. To offload the loading of the publisher, we plan to have 2 Publisher (PubNode1 and PubNode2) using Peer-to-Peer Transaction Replication and the rest 8 subscribers will be divided into 2 groups. The subscribers 1-4 (SubNode1, SubNode2, SubNode3, and SubNode4) will be set to be standard transactional replication subscribers of PubNode1, and the rest 4 subscribers (SubNode5, ..., SubNode8) will be set to be standard transactional replication subscribers of PubNode2.
Is it possible to setup above 2 Publisher + 8 Subscriber topology? Also, could we set the 8 subscribers with updatable subscriptions to achieve each node is updatable?
We do not plan to set all the 10 nodes using Peer-to-Peer Transactional Replication as it is necessary to make sure n*(n-1)/2 (i.e. 45) peer-to-peer connections is reliable. It seems that the maintenance cost is high if the servers are not in a LAN and the topology is very high coupling. So we prefer to divide the 10 nodes into 2 groups and reduce the cost of each node to maintain the connections to all other sites.
Hi when i try and open a database in sql server management studio i get the error "Cannot open user default database. Login failed. Login failed for user 'DOMAINUser'. (.Net SqlClient Data Provider)", what can i do to rectify this, i have googled around and still havent found no answers.
Hi, Im getting this error when attempting to retrieve data from an sql database.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open database requested in login 'projectAllocations'. Login fails. Login failed for user 'sa'.
Source Error:
Line 13: objConn = New SqlConnection( "Server=LAB303-066NETSDK; Database=projectAllocations; User ID=sa;Password=mypassword") Line 14: objCmd = New SqlCommand("SELECT * FROM project_descriptions", objConn) Line 15: objConn.Open() Line 16: objRdr = objCmd.ExecuteReader() Line 17: While objRdr.Read()
Been looking through the forums for a solution to this problem.I already tried granting access through statements such as:exec sp_grantloginaccess N1'machineNameASPNET'But they don't seem to work.. i vaguely remember seeing somewhere a DOS command line statement that grants access to the ASPNET_WP and that fixed my problem before on another computer.. but this is a new computer and i forgot to write down the command.Can anyone help explain and propose a solution to my problem. Many thanxs.
I am using the MSDE to connect to my ASP.NET application. I get this error after clicking the login button of my login page. Anyone know why this would happen?
Thanks for any help,
Cannot open database requested in login 'DataSQL'. Login fails. Login failed for user 'serverASPNET'.
Hey Microsoft: this affects development that will eventually sell a lot of seats on SharePoint Server 2007. If you guys and gals can't straighten out this mess, you can't expect custom solutions with custom web parts. So pay attention for your own good. Yes, SPS 2007 is what this is all about. I've created simpe web parts and deployed them, same VS 2005, but I need local development and debugging for more complex stuff. I'm really disappointed that you have no solution for this problem.
I've seen other posts on this, but the result seems to be the same: if you fix it, it's by accident, not by design.
1. I created a blank ASP.NET web site
2. I added a web part manager
3. I added a web part zone
I get the error described above. I have no idea why SQL Server settings are so screwed up.
I've tried all the stuff in the other posts - security settings, command line installation, etc. None of those worked.
The default template(s) don't copy anything into App_Data, nor create an empty folder. I don't know why that is. I have other web sites working just fine, but they use remote SQL databases, or local ones I created, and didn't need profile management (no forms authentication, no web parts, no web zones).
I've also started out with a local database, using SQL Authentication, later moving it to a remote server, and never had any problems. The SQL Server developer edition and Express seem to work just fine. I can also debug stored procs when the .mdf is in App_Data. So the problem isn't one of connectivity.
What would cause the default screw-up? This would seem to point from all directions to a problem with Visual Studio (2005)? The installation is defalt - perhaps some extras included (copy local), but nothing unusual. AJAX for ASP.net is installed, but not used in the above "default web site" trial. Likewise Syncfusion's tools, which work fine on other developer workstations at this same location, all of which are from the same image (purchased at the same time & imaged). That web parts work on other boxes, running all the same management tools (anti-virus, remote sys admin/sms etc.) makes none of those suspect.
I think Microsoft needs to have a clean problem solution and publish it. SP1 certainly doesn't fix it. What's worse is the stupid, lame error message. "I can't open the default database". Well, what did you try? What do you think the default is? What settings are you using? Why is there no debugging information other than the usual worthless trace information showing it's all deep within the ProviderBase and SqlClient namespace code? How is that supposed to be helpful?
If anyone has anything solid, not guesses, I'd like to know.
Hi,I have transactional replication set up on on of our MS SQL 2000 (SP4)Std Edition database serverBecause of an unfortunate scenario, I had to restore one of thepublication databases. I scripted the replication module and droppedthe publication first. Then did a full restore.When I try to set up the replication thru the script, it created thepublication with the following error messageServer: Msg 2714, Level 16, State 5, Procedure SYNC_FCR ToGPRPTS_GL00100, Line 1There is already an object named 'SYNC_FCR To GPRPTS_GL00100' in thedatabase.It seems the previous replication has set up these system viewsSYNC_FCR To GPRPTS_GL00100. And I have tried dropping the replicationmodule again to see if it drops the views but it didn't.The replication fails with some wired error & complains about thisviews when I try to run the synch..I even tried running the sp_removedbreplication to drop thereplication module, but the views do not seem to disappear.My question is how do I remove these system views or how do I make thereplication work without using these views or create new views.. Whyis this creating those system views in the first place?I would appreciate if anyone can help me fix this issue. Please feelfree to let me know if any additional information or scripts needed.Thanks in advance..Regards,Aravin Rajendra.
i'm using the Enterpirse library logger to write logs into a database. When choosing connection string i choose the database i want in the "connection properties" dialog box and push 'Test connection' button. everything goes well.
then i open the SQL Server Management studio express and connect to the databse to check some things, from that point on , when i push the 'Test Connection' button in the Enterprise library i get the error:
"cannot open user default database. Login failed. login failed for user My'server/MyuserName'"
even when i close the sql server manager , it is still stuck - the connection test doesn't work anymore.... it only work when i restart the computer.
I have been researching on the proper steps or sequence to follow to completely remove SQL Server 2012 Transactional Replication. Â I have read articles about using SSMS as well as using replication stored procedures and some procedures use SQLCMD or just regular TSQL executed in SSMS. Â I have also read articles where people said all you really need is connect to the Publisher instance, find the publication you want to remove and choose "Delete" and everything will be taken care of behind the scene. I have three SQL servers that participate in transactional replication. Â SQL-P (publisher),Â
SQL-D (distributor) and SQL-S (subscriber). Â Do I need to connect to the distributor instance and the subscriber instance when removing transactional replication or is it just really connecting to the publisher and click delete on the publication? I want everything gone including any metadata, systems tables, distributions db and any other replication objects created during the initial configuration.
I Guys I am trying to create an application that writes data to a SQL database (studio express). The application works fine but as soon as I open the table with the SQL server management studio express the application does not work any more displaying the following message:
€œCannot open user default database. Login failed. Login failed for user€¦€?
If I siwtch off and on the computer the problem disappear till the table will be open with the database management studio express!!!!!
Hi I have asp.net2 app using SQLExpress which works fine in VS2005. When I compile it and try to run it from IIS on the same machine using the same sql server database with: connectionstring="server=.SQLEXPRESS;Database=abc.mdf;Trusted_Connection=yes"/> I get the following error. Cannot open database abc.mdf requested by login. The login failed. Login failed for user 'machinenameASPNET' Any help much appreciated
I have a script component. What it does, it queries the a table using a connectionstring assigned to it in the Connection Managers Editor (which is an ado.net adapter). this works fine when i'm using a windows login in the ado.net connection manager. But when i changed my connection to use SQL server login, I encounter this error:
OnError,,,Add new records to Dim_T_Status (Case),,,10/14/2007 5:54:47 PM,10/14/2007 5:54:47 PM,-1073450910,0x,System.Data.SqlClient.SqlException: Login failed for user 'CS_REPORT'. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket) OnError,,,LOAD AND UPDATE OCEAN Dimension Tables,,,10/14/2007 5:54:47 PM,10/14/2007 5:54:47 PM,-1073450910,0x,System.Data.SqlClient.SqlException: Login failed for user 'CS_REPORT'. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket) OnError,,,LoadOCEANDimensions,,,10/14/2007 5:54:47 PM,10/14/2007 5:54:47 PM,-1073450910,0x,System.Data.SqlClient.SqlException: Login failed for user 'CS_REPORT'. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
Cannot open database "QuoteSystem" requested by the login. The login failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'. Last time I recieved this error I had to add ASPNet, NTAuthority, and myWebSiteUsers USERS under the database properties-->permissions setting for the specific database I am trying to access with the website but this database(QuoteSystem) does not lists any of these objects so I can add them. Does anybody know what I have to do to fix this? I am using SQL Server 2005.
Please, can anyone tell me why I am getting the undermentioned error message when I develop my application as an IIS Site in Visual Web Developer 2005 Express ? I have already developed and successfully tested it as a 'FileSystem Web Site' .I am using SQLSErver Express 2005 edition and have which I have installed along with the Northwind database as per the download instructions. My IIS software is version 5.1 which I have checked and it is configured to allow Integrated Windows Authentication. the relevant code is (1) web.config file connection strings <connectionStrings> <add name="NorthwindConnectionString" connectionString="Data Source=.sqlexpress;Initial Catalog=Northwind;Integrated Security=True" providerName="System.Data.SqlClient"/> </connectionStrings>(2) the grid view control and sqldatasource <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="CategoryID" DataSourceID="SqlDataSource1"> <Columns> <asp:BoundField DataField="CategoryID" HeaderText="CategoryID" InsertVisible="False" ReadOnly="True" SortExpression="CategoryID" /> <asp:BoundField DataField="CategoryName" HeaderText="CategoryName" SortExpression="CategoryName" /> <asp:BoundField DataField="Description" HeaderText="Description" SortExpression="Description" /> </Columns> </asp:GridView> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:NorthwindConnectionString %>" SelectCommand="SELECT [CategoryID], [CategoryName], [Description] FROM [Categories]"> </asp:SqlDataSource>This is the full error message and details: Server Error in '/sqlservertest' Application.
Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'JERRY-3C9615BAAASPNET'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'JERRY-3C9615BAAASPNET'.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
All the logins with sysadmin role are locked out in one of the SQL server. Also in that instance Logon trigger is implemented which allows only certain users with Windows Authentication to logon.
This server is converted into single user mode by using command prompt. Now we are attempting to connect to SQLServer using command sqlcmd -S FTCPU3239 (since we do not have any other login) and create a new login with sysadmin role but are refused due to logon trigger. it says Login failed for login 'DomainNameUserName' due to trigger execution.
Hi all, Iam getting this error System.Data.SqlClient.SqlException: Cannot open database "XYZ" requested by the login. The login failed.Login failed for user 'xyz-abcASPNET'. when trying to open the page.... http://localhost:1807/projectname/WebFormName.aspx as http://localhost/projectname/WebFormName.aspx Couldnt figure out the solution.Please help Soujanya
Hi, I just installed Visual web developper 2008 express with all options including SQL srvr express 2005!
This is from default iso image on the official website.
I create my first project and when I want to do ASP.NET configuration from web site menu, i got this error:
"Cannot open database "aspnetdb" requested by the login. The login failed."
I am just trying to learn here so i even did not create any dB or something, it is 1st time I run configuration to add security roles and users for testing!
I also un-installed all and re-installed, still the same...
I am working on bringing our disaster recovery site to be a live site. Currently we replicate to one of out servers (server B) with merge replication (from server A). Server A also does one way transactional replication form some table to several other servers including servers at the DR site.
This setup is not going to be fast enough for what we need so I am wondering if a table is receiving merge replication will the merge updates also replicate down the transaction path??
Example... Server B update a row and merges to Server A. With this update them replicate (via transactional) to Server C??
Error!!! 1>Cannot open database "intranet" requested by the login. The login failed.Login failed for user 'RAGHAVEN-71AF9BASPNET'. Error!!! 2> An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) These both errors r coming simultaneously when start to debug only when i tried to retrive data from database , from past two days not able to work on database,plz help me in solving this ,i tried everything what i know and even on experts advice from recommended websites, forums and on google search..
I am getting the above error. On server1 I am running a dts package via a sql server job (sql server2005). This has been working perfectly for over a year. This package needs to access a database on server2. The database in question on server2 was recently restored from our produciton environment to refresh the data. Every since thsi time the job on server1 is failing with the above error.
Steps I have taken so far: droped the user from server2 and recreated it gave the user sysadmin rights on server 2 and server1
I'm using Visual Web Developer, .NET Framework 2.0, ASP.NET 20., IIS 5.1. on Windows XP Pro SP2.
I have assigned every possible user i can think of full permissions to the web folder, all of the subfolders, and the database files. This includes Administrator, Administrator Groups, ASPNET user, IUSR_Machine, Interner guest account, Network Group, Network Service Group, Power Users Group, Users.
I'm logged on as administrator.
When i run the web service from within VWD, i get this error.
Cannot open database "eBayTrader" requested by the login. The login failed. Login failed for user 'DHJC2R91ASPNET'.
Does anybody know how to resolve this problem ?
I have been working on it for days. I will gladly pay someone to work this out with me over the phone/email. I'll send you a check before we start.
I have created a new database within SQLServer Express 2005 and have an ASP page in IIS. Any time i attempt to access the database I get the following error:
[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open database "testDB" requested by the login. The login failed.
The ODBC connection that I have created works fine if connecting to the same table (literally three sample fields with two records) in an Access database.
The database connection that I am using is:
Set DatabaseConnection = Server.CreateObject("ADODB.Connection") DatabaseConnection.Open "DSN=testDB;UID=EINSTEINAdministrator&pwd=password;DATABASE=testDB;APP=ASP Script" Set rs = Server.CreateObject("ADODB.recordset") SQLString = "SELECT * FROM testTable" rs.Open SQLString, DatabaseConnection if NOT rs.EOF then Response.Write(rs("testField1") & " - " & rs("testField2")) end if rs.Close DatabaseConnection.Close Set DatabaseConnection = Nothing
EINSTEIN is the name of the server, rs = Recordset. I have tried changing to just Administrator instead of machinenameAdministrator with no success. I have got SQL Server Management Studio Express CTP, and can log in fine to SQL Server using EINSTEINAdministrator.
Many a times see the below error in SQL Error log.
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: ]
Is this something to do here?
Note: If I run the below statement I know that the SQL Error log entry will go off, but wanted to know the real significance of this error?
CREATE LOGIN [NT AUTHORITYANONYMOUS LOGON] FROM WINDOWS
I get that error.I'm sure you see this question alot, but i'm dumfounded by it. Problem is that i've taken the code directly off the live website, yes i've changed the connection string... Private _connStr As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=EFM;User ID=*****;password=******;Trusted_Connection=true" and am using the database that was originally worked on... Only thing that has changed is my new computer.... had to reload everything... new VWD, new sql express, new sql servermanagement studio express... all semmingly working fine... ie i can see the database and edit it, i just cant connect to it through the localhost to test the program. Any Ideas? why does this error come up... how can i fix it? Thanks in advance Cannot open database "EFM" requested by the login. The login failed.Login failed for user 'GERTIEIBM USER'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open database "EFM" requested by the login. The login failed.Login failed for user 'GERTIEIBM USER'.
Source Error:
Line 19: MyBase.New()Line 20: myConn = New SqlConnection(_connStr)Line 21: myConn.Open()Line 22: End SubLine 23:
Source File: C:Documents and SettingsIBM USERDesktopEntertainmentwwwrootApp_CodecDB.vb Line: 21
Hi, we are running a webapplication, using IIS6, Windows 2003 64 bit in classic Asp. In the asp pages we connect to our SQL server (SQL Server 2005 64bit,windows 2003 64 bit), mirrored on a third sql server (same software setup as the first sql server).
The mirroring is without witness.
This works perfectly but sometimes we get the following error :
Description: [Microsoft][SQL Native Client][SQL Server]Cannot open database "OBJECTS" requested by the login. The login failed.
In the logs of sql, we see that the offending connection does not go the principal but to the mirror. Which would cause the problem of course..
The name of the database varies, and there is no consistent error. Most of the time there are no problems (95%), but sometimes we get these errors.
Connection from the asp to sql is done using ADO, using following driver in the connectionstring :
Driver="{SQL Native Client}"
Does anyone have an idea what could be the problem ? We can of course increase timouts for the mirroring, but is this the solution ?
