Looking For The Change Using A Complex Logic
Apr 25, 2008
I have records like below
ID Facility Procedure Date Action
1001 A 888 07/01/2007
1002 A 888 07/31/2007
1003 B 888 09/01/2007
1004 B 888 09/15/2007
1005 B 888 10/11/2007
1006 B 999 10/24/2007
1007 B 777 10/25/2007
1008 B 777 10/30/2007
I have to update an action column based on the business logic below.
1. if there is a change in FACILITY with the same PROCEDURE and the DATE between new facility and the date of previous record is less than 30 days ,
then update ACTION = TP
2. if there is a change in procedure , update Action = TS
3. is there is a change in FACILITY but have different PROCEDURE, then NO UPDATE
The output should look like below:
ID 1003 has TP because the FACILITY has changed with the same PROCEDURE compare to the previous record and the DATE is less than 30 days
ID 1006 has TS because the PROCEDURE has changed compare to previous record
ID 1009 didn’t get changed because it has different PROCEDURE even though FACILITY got changed...
ID Facility Procedure Date Action
1001 A 888 07/01/2007
1002 A 888 07/31/2007
1003 B 888 08/05/2007 TP
1004 B 888 09/15/2007
1005 B 888 10/11/2007
1006 B 999 10/24/2007 TS
1007 B 999 10/25/2007
1008 B 777 10/30/2007 TS
1009 D 666 11/07/2007
What is the best way to do this? Do I have to use a cursor to compare each record? Can you sow me some code examples?
View 7 Replies
ADVERTISEMENT
Apr 25, 2008
I have records like below
ID Facility Procedure Date Action
1001 A 888 07/01/2007
1002 A 888 07/31/2007
1003 B 888 09/01/2007
1004 B 888 09/15/2007
1005 B 888 10/11/2007
1006 B 999 10/24/2007
1007 B 777 10/25/2007
1008 B 777 10/30/2007
I have to update an action column based on the business logic below.
1. if there is a change in FACILITY with the same PROCEDURE and the DATE between new facility and the date of previous record is less than 30 days ,
then update ACTION = TP
2. if there is a change in procedure , update Action = TS
3. is there is a change in FACILITY but have different PROCEDURE, then NO UPDATE
The output should look like below:
ID 1003 has TP because the FACILITY has changed with the same PROCEDURE compare to the previous record and the DATE is less than 30 days
ID 1006 has TS because the PROCEDURE has changed compare to previous record
ID 1009 didn€™t get changed because it has different PROCEDURE even though FACILITY got changed...
ID Facility Procedure Date Action
1001 A 888 07/01/2007
1002 A 888 07/31/2007
1003 B 888 08/05/2007 TP
1004 B 888 09/15/2007
1005 B 888 10/11/2007
1006 B 999 10/24/2007 TS
1007 B 999 10/25/2007
1008 B 777 10/30/2007 TS
1009 D 666 11/07/2007
What is the best way to do this? Do I have to use a cursor to compare each record? Can you sow me some code examples?
View 2 Replies
View Related
Feb 15, 2007
okay;
i have a table called tblSlots
tblSlots is a list of Start datetimes and End datetimes.
every day has the same list of 10 slots.
tblSlots:
PKSlotINDEX
datStartTime
datEndTime
then i have a table called tblPersons
tblPersons:
PKPersonINDEX
txtLast
txtFirst
then i have a table called tblSchedule
tblSchedule:
PKScheduleINDEX
fkSlotINDEX
fkPersonINDEX
i want to write a query that takes any one specific person's schedule for an entire specific day, adds an arbitrary number of days to datStartTime, and finally inserts the PKSlotINDEX corresponding to the calcultated StartTime and fkPersonINDEX.
wow complicated isnt it...
the goal is to take the schedule of one day for one person and copy it to another day; i can scrap my current layout if necessary.
thanks!
View 1 Replies
View Related
Mar 28, 2008
Table:GRoupAllocation
______________________
GroupId (Primarykey)
GroupName
Table:SystemAllocation
_______________________
SystemId(Primarykey)
SystemName
GroupId (foreignkey)
Table:DeviceAllocation
_______________________
DeviceId (Primarykey)
DeviceName
SystemId (foreignkey)
_______________________
Table:SensorAllocation
_______________________
SensorId (Primarykey)
SensorName
GroupId (Primarykey)
SystemId (foreignkey)
_______________________
Table:GRoupAllocation
______________________
GroupId GroupName
1 Group1
2 Group2
3 GRoup3
4 Group4
Table:SystemAllocation
___________________________
SystemId SystemName GroupId
1 system1 1
2 system2 2
3 system3 3
4 system4 2
5 system5 1
Table:DeviceAllocation
___________________________
DeviceId DeviceName SystemId
1 Device1 1
2 Device3 3
3 Device4 2
Table:SensorAllocation
____________________________________________
SensorId SensorName GroupId SystemId DeviceId
1 sensor1 1 1 1
3 sensor3 2 2
4 sensor4 3 3 3
my results should be like this:
Results:
___________________________________________________________________
GroupName SystemName DeviceName SensorName
___________________________________________________________________
Group1 system1 Device1 sensor1
Group1 null null sensor2
GRoup2 system2 null sensor3
GRoup2 system4 null null
Group3 system3 Device3 sensor4
Group4 null null null
so i need to populate the results in treeview.my treeview looks lika this:
Group1
|____System1
|________Device1
|_______sensor1
|_______system5
Group2
|____System2
|________Device1
|_______sensor1
|____System4
|____Device4
like this i need to populate. i need to show all the groupname and belonging systemName and belonging devicename and belonging sensorname
so please give me query for this complex operation please
criteria's
1.GRoup can have systems and system can have devices and device can have sensors
2.GRoup can have systems and systems can have sensors[no device]
3.GRoup can have systems and systems can have devices [no sensor]
4.GRoup can only have system [no device, no sensor]
5.GRoup can have only sensor[no system, no device]
so please
View 5 Replies
View Related
Sep 21, 2004
This concerns eligibility healthcare information. A member can have multiple rows in the table showing they are eligible for different date ranges with different health plans. eff_date and term_date are the fields in this table. Term_date can be NULL.
I need a WHERE statement that shows members
1) eligible between 1/1/2004 and 8/15/2004
(term_date is null or term_date >= '8/15/2004')
and eff_date <='1/1/2004'
2) members are allowed only one gap in this timeframe of up to 45 days. *NEED HELP
3) a gap of 1 day should not be counted as a gap in enrollment. *NEED HELP
Any help on #2 and #3 would be appreciated.
View 1 Replies
View Related
Nov 8, 2006
hi.I am having probelms with an update statement. every timei run it, "every" row updates, not just the one(s) intended.so, here is what i have. i have tried this with both AND and ORand neither seem to work.i dont know why this is elluding me, but i'd appreciate help with thesolution.thanks.UPDATE addSET add_s = 1WHERE add.add_status = 0 and add.add_email = 'mags23@rice.edu'or add_s in(SELECT a.add_sFROM add a, edit eWHERE a.email_address = e.email_addressand e.public_name = 'professor')
View 22 Replies
View Related
Mar 28, 2008
Table:GRoupAllocation
______________________
GroupId (Primarykey)
GroupName
TableystemAllocation
_______________________
SystemId(Primarykey)
SystemName
GroupId (foreignkey)
TableeviceAllocation
_______________________
DeviceId (Primarykey)
DeviceName
SystemId (foreignkey)
_______________________
TableensorAllocation
_______________________
SensorId (Primarykey)
SensorName
GroupId (foreignkey)
SystemId (foreignkey)
deviceid(foreignkey)
_______________________
Table:GRoupAllocation
______________________
GroupId GroupName
1 Group1
2 Group2
3 GRoup3
4 Group4
TableystemAllocation
___________________________
SystemId SystemName GroupId
1 system1 1
2 system2 2
3 system3 3
4 system4 2
5 system5 1
TableeviceAllocation
___________________________
DeviceId DeviceName SystemId
1 Device1 1
2 Device3 3
3 Device4 2
TableensorAllocation
____________________________________________
SensorId SensorName GroupId SystemId DeviceId
1 sensor1 1 1 1
3 sensor3 2 2
4 sensor4 3 3 3
my results should be like this:
Results:
___________________________________________________________________
GroupName SystemName DeviceName SensorName
___________________________________________________________________
Group1 system1 Device1 sensor1
Group1 null null sensor2
GRoup2 system2 null sensor3
GRoup2 system4 null null
Group3 system3 Device3 sensor4
Group4 null null null
so i need to populate the results in treeview.my treeview looks lika this:
Group1
|____System1
|________Device1
|_______sensor1
|_______system5
Group2
|____System2
|________Device1
|_______sensor1
|____System4
|____Device4
like this i need to populate. i need to show all the groupname and belonging systemName and belonging devicename and belonging sensorname
so please give me query for this complex operation please
criteria's
1.GRoup can have systems and system can have devices and device can have sensors
2.GRoup can have systems and systems can have sensors[no device]
3.GRoup can have systems and systems can have devices [no sensor]
4.GRoup can only have system [no device, no sensor]
5.GRoup can have only sensor[no system, no device]
so please give me query for this. not stored procedures.i need query for this
View 3 Replies
View Related
May 28, 2008
Input Columns
Jan,Feb,March,April,May,June,July......December
All these columns Have Boolean 'Y' Or 'N' Data
Here is what i want as output
Example
Jan 'Y'
Feb 'Y'
March'Y'
April'Y'
May 'N'
June 'Y'
July 'Y'
..
..
..
Dec 'Y'
Output should be:
Start date:jan/year
End date:April/year
Again the start date:May/year
End Date: dec/year
So basically For the same person i should have two recods...
Text file to sql server 2005
How can i achieve this
Please let me know
View 14 Replies
View Related
Oct 8, 2007
Hi, I am trying to replicate the row level security rules in reporting service and realize the "security filter" property is a pure client side filter expression.
In our old system, we are using a set of rules to decide the row level security, something like:
if user is owner of this file or
( if user's department matches this file and the user is the department manager ) or
if this user has unfinished task associated with this file or
...
So obviously it need more information than the just GetUserId(). What we have done is creating a CLR UDF as GetUserCaseList( int uid ) and returns a two column table ( case_id, case_right ).
We want to somehow inject these logics into the reporting while the user is using reportBuilder.exe, but we cannot find a way to put it into the data source view and/or the semantic data model.
I am pretty sure I am not the only guy who's having this problem, but I cannot find any hint....
Thanks in advance.
Jian
View 3 Replies
View Related
May 14, 2008
please need rescue- complex update logic
this is my table
1
2
3
4
5
EMPID
fld1
fld11
fld111
fld2
fld22
fld222
fld3
fld33
fld4
fld44
fld444
fld5
fld55
fld555
1111
A
B
C
7
8
9
G
H
I
J
K
L
M
N
2222
N
M
L
K
J
I
H
G
F
E
D
C
B
A
3333
1
2
3
A
B
C
C
E
Y
I
O
W
Y
P
i need to update for example the eployee 1111 with employee 3333
but with swap ( take the value of employee 1111 in field- fld2,fld22,fld222 and swap value between employee 3333
in field- fld2,fld22,fld222 )
Code Snippet
---update eployee 1111 with employee 3333
-so
if i put the value 2
than ------------------ swap value between 2 employee
set empid1= 1111
set empid2=3333
value_swap=2
if value_swap=2
than
update fld2,fld22,fld222
with fld2,fld22,fld222
------------------- take the value of employee 1111 in field- fld2,fld22,fld222 and swap value between employee 3333
--------------------in field- fld2,fld22,fld222
value_swap
=1
=2
=3
=4
=5
EMPID
fld1
fld11
fld111
fld2
fld22
fld222
fld3
fld33
fld4
fld44
fld444
fld5
fld55
fld555
1111
A
B
C
A
B
C
G
H
I
J
K
L
M
N
2222
N
M
L
K
J
I
H
G
F
E
D
C
B
A
3333
1
2
3
7
8
9
C
E
Y
I
O
W
Y
P
Code Snippet
---update eployee 2222 with employee 1111
-so
if i put the value 5
than ------------------ swap value between 2 employees
set empid1= 1111
set empid2=2222
value_swap=5
if value_swap=5
than
update fld5,fld55,fld555
with fld5,fld55,fld555
------------------- take the value of employee 1111 in field- fld5,fld55,fld555 and swap value between employee 3333
--------------------in field- fld5,fld55,fld555
=1
=2
=3
=4
=5
EMPID
fld1
fld11
fld111
fld2
fld22
fld222
fld3
fld33
fld4
fld44
fld444
fld5
fld55
fld555
1111
A
B
C
7
8
9
G
H
I
J
K
W
Y
P
2222
N
M
L
K
J
I
H
G
F
E
D
C
B
A
3333
1
2
3
A
B
C
C
E
Y
I
O
L
M
N
TNX FOR ALL THE HELP I GET IN THIS Forum
View 7 Replies
View Related
Dec 7, 2006
Hello all,
I am new to SSIS, so I am hoping there is an easier way to do this...
I need to evaluate a date in a field and determine if it is between the beginning and end of whatever the current month is... In Access, this was written as something like:
IIF(datevalue >= CDate(Format(Now(),"mm/01/yy")) AND datevalue < CDate(Format(DateAdd("m",1,Now()), "mm/01/yy)), value1, value2)
Trying to recreate this in SSIS using expressions during a derived transformation has been extremely difficult. Here is what I came up with:
(DUE_DATE >= (DT_DATE)( (DT_WSTR,2)MONTH(GETDATE())+"/01/"+ (DT_WSTR,2)YEAR(GETDATE()))) && (DUE_DATE<(DT_DATE)( (DT_WSTR,2)MONTH( DATEADD("m",1,GETDATE()) )+"/01/"+(DT_WSTR,2)YEAR( DATEADD("m",1,GETDATE() )))) ? value1 : value2
Any help you all could give would be appreciated.
Thanks!
Josh
View 7 Replies
View Related
Nov 12, 2003
I have web forms with about 10-15 optional search parameters (fields) for a give table. Each item (textbox) in the form is treated as an AND condition.
Right now I build complex WHERE clauses based on wheather data is present in a textbox and AND each one in the clause. Also, if a particular field is "match any word", i get a ANDed set of OR's. As you can imagine, the WHERE clause gets quite large.
I build clauses like this (i.e., 4 fields shown):
SELECT * from tableName WHERE (aaa like '%data') AND (bbb = 'data') AND (ccc like 'data%') AND ( (xxx like '%data') OR (yyy like '%data%') )
My question is, are stored procedures better for building such dynamic SQL clauses? I may have one field or all fifteen. I've written generic code for building the clauses, but I don't know much about stored procedures and am wondering if I'm making this more difficult on myself.
View 7 Replies
View Related
May 12, 2015
Trying to determine what the minimum permissions i can grant to a user so they can see the change tracking data
View 1 Replies
View Related
May 10, 2008
Can anyone see where my logic may have gone a stray?
A user would be attempting to update a gridview row, I'm storing the amount of an item and the qty they purchased. If the order was for $150 and the grid has two item 1 x $50 and 2 x $50 the order already totals $150, so if the user tries to change the first item to a qty of 2 x $50 the total would be $200 and this would be more than the total payment or $150.
I want to then tell them they cannot do this.
@AP_ID Int,@AI_ID int,@PurchaseAmount money,@PurchaseQTY int,@LastUpdate datetime,@LastUpdateBy nvarchar(50),@Receipt_ID intASdeclare @current_item_total decimal(18,2)declare @new_item_total decimal(18,2)declare @total_payments decimal(18,2)declare @current_purchase table(receipt_id int,purchase_amt money)INSERT INTO @current_purchase SELECT tblPurchase.Receipt_ID,(tblPurchase.PurchaseAmount * tblPurchase.PurchaseQty) as purchase_amtFROM tblPurchase INNER JOIN tblReceipts ON tblPurchase.Receipt_ID = tblReceipts.Receipt_IDWHERE tblReceipts.Receipt_ID=@receipt_id--Get total already saved to recordselect @current_item_total = sum(purchase_amt) from @current_purchase--Get total amount of payment saved to recordselect @total_payments = sum(tblReceipts.AmountPaid) from tblReceipts where tblReceipts.receipt_id=@receipt_id--Get total amount user is trying to save to recordset @new_item_total = (@PurchaseAmount * @PurchaseQTY)--If current total plus new total is greater than total payment, tell user they cannot do this.IF ((@current_item_total + @new_item_total) > @total_payments)BEGINSELECT 'You are attempting to add more than your total payment.' AS MESSAGEENDELSEBEGIN--UPDATE ROWUPDATE tblPurchase SET [AI_ID]=@AI_ID,[PurchaseAmount]=@PurchaseAmount,PurchaseQTY=@PurchaseQTY,LastUpdate=@LastUpdate,LastUpdateBy=@LastUpdateBy WHERE [AP_ID]=@AP_ID SELECT 'Item was updated.' AS MESSAGEEND
View 2 Replies
View Related
Jan 6, 2004
Trying to bind some data to a datalist for a report.
User selects an Industry from a dropdown list and then I dump all records for that industry. However in order to parse some of the record field values into names (I.E. from a 1 to the actual company name) for some records I have to read TABLE_ONE and for other records I might have to read TABLE_TWO depending on the value of FIELD_ONE.
If FIELD_ONE = "A" then I get the NAME from TABLE_ONE.
If FIELD_ONE = "B" then I get the NAME from TABLE_TWO.
If FIELD_ONE = "C" then I get the NAME from TABLE_THREE.
I'm lost at how to get started on this. I thought about adding IF statements to my query but these won't work because I'm not passing in the value of FIELD_ONE ahead of time - it's part of the query. So I thought maybe I could do a pre-read and store all FIELD_ONE values in an ArrayList and pass these in as parameters, but the stored proc is only being called once - so that won't work.
Any thoughts on how I can do this?
View 2 Replies
View Related
Apr 27, 2006
tbl_one hv 8mil rows, tbl_2 have 8k rows...
if
select count(*) from tbl_one
where sub_col1 = 2
return 3mil rows
and
select count(*) from tbl_2
where ad_col1 = '000009'
return 4k rows
HOW COME..
select count(*) from tbl_one,tbl_2
where (sub_col1 = 2 and ad_col1 = '1234')
return more than 12 billion rowss?? helpp..
View 7 Replies
View Related
May 3, 2006
I have to write trigger to relate two table.
If I have made changes like insert, update and modify in one table1 automatically have to change the table2 and vice versa.
How this can be done, do we need to point the common key fields in both table while inserting
View 8 Replies
View Related
Jun 12, 2007
What i'm trying to do is if this column dt.IN_DIV_NO is populated take that value first if it's null than rr.AIQ_R_DIVISION_NO and if that column is null than rr.F_DIVISION_NO.
This is what i came up with, will it evaluate the way i need it to?
case When dt.IN_DIV_NO is not null then dt.IN_DIV_NO else case when rr.AIQ_R_DIVISION_NO is null then rr.F_DIVISION_NO end end as Current_DIV
Thank-you
View 4 Replies
View Related
Mar 13, 2008
I have a logic problem,
I am selecting from a table
Select * from TAB_A
where state not in (1,4)
and create_date < '2008-01-01'
and
(
(x != 2 and y != 1 and z != 4) or
(x != 6 and y != 3 and z != 1) or
(x != 8 and y != 0 and z != 9)
)
then for example i am getting results where x,y and z is equal to one
or more of above combinations ?
Now i vaguely remember that using or with a != messes up the logic ?
if so can i use an NOR ? does it exist ?
View 5 Replies
View Related
Mar 25, 2008
I am looking for the best approach to update a table's column based on the results of two other different tables. My tables structure is as follows.
Table 1 has columns A and B (tblemployee has location and employeenumber )
Table 2 has columns C and A (tblocation has locationID (identity) and location)
Table 3 has coumns C and B (tblcountry locationID (foreign key) and employeenumber.)
I want to update Table 3 (tblcountry) with the new locationID if and employee changes location or gets miscoded using an SSIS package.
Thanks in advance.
View 7 Replies
View Related
Nov 14, 2007
I am having a little problem with my logic.
i have a table simplehoursassignment that has a field named br.
i need to get the value from simplehoursassigment & say if @mybit AND br > 0
set each day.
--CREATE PROCEDURE rpt_siteMealList(
-- (@cmb1 AS VARCHAR(100)) WITH ENCRYPTION
--)
--
--AS
DECLARE @dtm1 AS DATETIME
DECLARE @mybit AS INTEGER
SET @mybit=10
SELECT @mybit = CASE datepart(dw,@dtm1)
WHEN 1 THEN 1 -- 'Sunday'
WHEN 2 THEN 2 -- 'Monday'
WHEN 3 THEN 4 -- 'Tuesday'
WHEN 4 THEN 8 -- 'Wednesday'
WHEN 5 THEN 16 -- 'Thursday'
WHEN 6 THEN 32 -- 'Friday'
WHEN 7 THEN 64 -- 'Saturday'
END
SELECT br FROM simplehoursassignment
IF @mybit AND br > 0
BEGIN
CASE WHEN @mybit = 1 THEN 'Sunday'
WHEN @mybit = 2 THEN 'Monday'
WHEN @mybit = 3 THEN 'Tuesday'
WHEN @mybit = 4 THEN 'Wednesday'
WHEN @mybit = 5 THEN 'Thursday'
WHEN @mybit = 6 THEN 'Friday'
WHEN @mybit = 7 THEN 'Saturday'
END
END
View 3 Replies
View Related
Apr 30, 2008
I have this query that is returning the same result twice and i cannot find why. I only have one record in Subquote.
Does anyone know what the problem is?
Code Snippet
SELECT s.*
FROM Quote q
INNER JOIN SubQuote s
ON q.id = s.quoteID
INNER JOIN TakeOffSheetItem t
ON t.quoteID_takeoffitem = q.id AND t.subQuoteID_takeoffitem = s.subquoteid
INNER JOIN PipeGroup p
ON p.quoteID_PipeGroup = q.id AND p.subQuoteID_PipeGroup = s.subQuoteID
WHERE (q.id = 1
AND q.deleted = 0
AND s.deleted = 0
AND t.deleted_takeoffitem = 0
AND p.deleted_PipeGroup = 0)
ORDER BY s.subquoteid
Thanks
K
View 4 Replies
View Related
Jul 31, 2006
I am trying to figure out how to set up this database.
Basically, there are products with their associated fields. Each product can belong to multiple categories, and each category also has subcategories.So far I have the following, but not sure if this is the best way to set it up...TABLE Products:product_id (int) (1-many relationship to product_id in Table Product_Category)sku (int)descriptionpriceTABLE Categorycategory_id (int) (1-many relationship to category_id in Table Product_Category)nameTABLE SubCategorysubcategory_id (int) (1-many relationship to subcategory_id in Table Product_Category)category_id (int)nameTABLE Product_Categoryprodcat_id (int) product_id (int) (many-1 relationship to product_id in Table Products)category_id (int) (many-1 relationship to category_id in Table Category)subcategory_id (int) (many-1 relationship to subcategory_id in Table SubCategory)
Thanks,Mick
View 1 Replies
View Related
Mar 20, 2007
Suppose in the table below the left column is called intNumber and right column is called strItem.I want to select the rows where the intNumber number appears for the first time(the ones marked with arrows), how do I do it?
View 4 Replies
View Related
May 21, 2007
I'm trying to figure out how to track what messages have been read by what users in a message board program we wrote. The users are identified by an ID number and each message has a unique number.
Let's say there are 10000 users and 200,000 messages. What would be the database setup/logic to track every user as to what messages they had read or not read? Maybe I'm missing something but it does not seem to be a trivial task.
View 2 Replies
View Related
Feb 27, 2006
Hi there!
Hope somebody got some better insight into this problem than i have. I'm struggling with some db logic.
Overview:
I have a client who is a publisher. They would like to post all their advert-size specs for each magazine to their web site. My first thought was that ill be able to build one table and populate it with the information for each magazine. I was wrong. Each magazine comes in a different size. Thus each magazine will have different advert-sizes as well.
Layout for a magazine will look something like this:
Size Trim Type Bleed
Full Page 280x440 270x430 290x450
Half Page 140x220 130x210 150x230
etc...
Some mags will not have values for Half pages since they dont print half pages and others will not have specs for Bleed.
Because of this - as an easy way out I created a table per magazine. It works but i dont think its very smart.
Break it down!
Ok so what im trying as a solution is to have three tables. The 1st table will hold the magID and Size values (e.g Half Page). The 2nd table will also have the magID and the Trim, Type, Bleed info. The 3rd table holds magID, sizeID, specID and the actual value (140x220).
I thought that this would be better because within these three tables i can store the information for each magazine regardless of their differences. Brilliant!
The Problem.
The problem comes when i have to put it all back together again. I need to represent this data in a table so i can bind it to a datagrid. I have NO idea how to do this. What i THINK i need to have is some temp table created on the fly. The row names for this temp table will come from the 1st table. The column names will come from the 2nd table and the values for each field will come from the 3rd table bound by foreign keys.
I've somewhat managed to do this with INNER JOINS. But it doesn't give the desired result. I need to set row and column NAMES using tables 1 & 2 then populate the columns with table 3, then bind to a datagrid.
Any ideas on how i could manage this?
If you made it tis far through my question then thanks anyways! I hope you can help me out!
Ta
View 4 Replies
View Related
Oct 26, 1999
I need to create a view joining 2 tables(1st with data, 2nd is a lookup) but I need to have some
logic(IF/ ELSE,ELSE and an UPDATE).
What is the best way?
-aw
View 1 Replies
View Related
Jul 28, 2005
I have 2 tables:
First table: empID,PlanID,groupID
Second: PlanID,groupID,EffectiveDate,TerminationDate,DeadlineDate
I need to show only employee with in spesific group who is not
enroll for the current month until deadline passed.
Example:
empID PlanIDgroupID
11012
PlanIDGroupIDEffectiveDate TerminationdateDeadlineDate
101208/01/200508/31/200508/15/2005
111209/01/200509/31/200509/15/2005
91208/01/200508/31/200508/15/2005
If I run it today I should not get any results back. If I run in
on 8/15/2005 I should get back data with palnID11.
View 1 Replies
View Related
Jul 27, 2004
Arrrgggg, nothing makes any sence any more. I need to write a select statement that will display results based on one of two things...
Zip Code OR City State
By the way this is a Table of addresses with zip codes, I also have a Lat/Long table associated to all the different zip codes that need to be joined.
The Psuedo code is somethinglike this...
SHOW All People WITH Appropreate Longditude and Latitude
Who Live
In @This ZipCode
OR
(In @State AND @City)
-------------------
Table Dealers
-------------------
dlrID - varchar
dlrName - varchar
dlrAddress - varchar
dlrCity - varchar
dlrState - varchar
dlrZip - varchar
dlrCountry - varchar
-------------------
-------------------
Table ZipCodes
-------------------
zipCode
zipCity
zipState
zipCountrty
zipLat
zipLong
...
-------------------
I have achieved this with Joins but the query takes 2+ minutes to execute
What am I doing wrong??? I am sure there is a better approach to this!
Thanks,
--Lito
View 13 Replies
View Related
Oct 9, 2006
Hi,
This might just be my brain not working after the weekend, but I'm having problems working out just how to do this.
The table:
CREATE TABLE [dbo].[tblQuiz] (
[id] [int] IDENTITY (1, 1) NOT NULL ,
[q1] [nvarchar] (100) COLLATE Latin1_General_CI_AS NULL ,
[q2] [nvarchar] (100) COLLATE Latin1_General_CI_AS NULL ,
[q3] [nvarchar] (100) COLLATE Latin1_General_CI_AS NULL ,
[q4] [nvarchar] (100) COLLATE Latin1_General_CI_AS NULL ,
[q5] [nvarchar] (100) COLLATE Latin1_General_CI_AS NULL ,
[q6] [nvarchar] (100) COLLATE Latin1_General_CI_AS NULL ,
[q7] [nvarchar] (100) COLLATE Latin1_General_CI_AS NULL ,
[q8] [nvarchar] (100) COLLATE Latin1_General_CI_AS NULL ,
[quizdate] [datetime] NULL ,
[ipaddress] [nvarchar] (50) COLLATE Latin1_General_CI_AS NULL ,
[sessionid] [nvarchar] (50) COLLATE Latin1_General_CI_AS NULL ,
[score] [int] NULL
)
The field [q5] has one of three values in it: "Happy", "Unhappy" or "Neither".
I have a list of about 50 session ID's. If a record in [tblQuiz] has a [sessionid] that matches one in this list, then:
if [q5]= 'Happy' then change it to 'Unhappy'
if [q5]= 'Unhappy' then change it to 'Happy'
The only way I can think of is to change all of one matching record type to some other value, then change all the other type, then change all the original type back to the other type. Which doesn't make much sense even when I've written it down, much less when I'm doing it and have to remember where I'm at. Is there a better way?
View 3 Replies
View Related
Jan 4, 2007
Hi pundits,
I need a logic for solving a realtime issue.
I have series 2^0,2^1,2^2,.......2^n ( i.e 1,2,4,8,16.....2^n)
I want to write a function(algorithm) which returns all the terms used(added) to form the number
e.g fun(7) :-1,2,4
fun(5) :-1,4
fun(257):-1,256
fun(6):-2,4
Ur help is highly appreciated.
Thanks in advance.
View 1 Replies
View Related
Jun 8, 2007
I have some table data and know how I want the results but I'm just having a bit of trouble in constructing the SQL logic to obtain the desired results. There's a site where visitors are able to select from a list of parts, and it will return a set of model/products that they can produce with the selected parts. Here's the data ...
tblModel tblPart
ModelId ModelName PartId PartName
---------------------- ----------------------
1 Alpha 1 CHOO1 Stem
2 Bravo 2 BH034 Rod
3 Bravo Pro 3 HRE Seat
tblModelPart
ModelPartId ModelId PartId
---------------------------------
1 1 1
2 2 1
3 2 3
4 3 1
5 3 2
6 3 3
... and here's the logic that I'm trying to implement, assume that the user selects from a form, parts with the PartId 1 and 3 ...
1. Return all models that contain only the parts selected.
ModelId ModelName
---------------------
2 Bravo
2. Return all models that contain the parts selected, and may contain other parts.
ModelId ModelName
---------------------
2 Bravo
3 Bravo Pro
... so do you have any idea on how the SQL would look for either of these queries?
Thanks in advance,
Goran
View 8 Replies
View Related
Dec 1, 2005
I need to do something like the following logic: (What I am trying to do is a weight conversion statement)
select
part,
desc,
net_wt,
net_wt_um,
pack_um,
pack_wt,
@somevariable = net_wt / (if net_wt_um <> pack_um then
(if exist(select conversion)
from table1
where field2 = pack_um)
then pack_wt / conversion
else pack_wt
Any thougts? I am basically just looking for a way to do if/else in select statements.
Thanks,
Scott
View 9 Replies
View Related
