I have a table (temp_Order) wherein I use to insert a temporary order... after inserting the temporary order, when the buyer submits the order,
I want to loop through the table and fetch the orders made by the buyer and insert those products on another table (Order)...
how can I achieve this? im currently using sqlDataSource...
I want to loop through rows and append values to a declared variable. The example below returns nothing from Print @output, it's as if my @output variable is being reset on every iteration.
declare @i int,@output varchar(max)
set @i = 1
while @i < 10
begin
set @output = @output + convert(varchar(max),@i) + ','
print @output
set @i = @i +1
end
Hi,
I have some duplicate rows in a table. I didnt define any primary key or unique key on the table.
I can get unique rows using DISTINCT, but i want to fetch only the duplicated rows and also i want to delete the duplicated rows.
How can i do it?
Please help me.....
Thanx in Advance
I am trying to create a stored procedure where i would like to fetch the next previous and current rows from a particular pagename which is stored in a table with sorting of dateadded
like my products table structure
id
iQty
strProductTitle
strPageName
DtAdded
DtApproved
my dummy records are like
1 13 'PCHDD' 'PCHDD' '2009-12-03 04:32:30.363' '2009-12-04 04:32:30.363'
2 30 'SDRAM' 'SD_Ram' '2009-12-03 04:32:30.363' '2009-12-06 04:32:30.363'
3 12 'Pen Drive' 'Pendrive' '2009-12-03 04:32:30.363' '2009-12-05 04:32:30.363'
4 3 'Note Book' 'NoteBook' '2009-12-03 04:32:30.363' '2009-12-08 04:32:30.363'
5 15 'VIO' 'VIO' '2009-12-03 04:32:30.363' '2009-12-06 04:32:30.363'
6 19 'PS2' 'PS_2' '2009-12-03 04:32:30.363' '2009-12-09 04:32:30.363'
7 31 'PS3' 'PS_3' '2009-12-03 04:32:30.363' '2009-12-02 04:32:30.363'
8 23 'WII' 'WII' '2009-12-03 04:32:30.363' '2009-12-10 04:32:30.363'
9 22 'Speakers' 'Speakers' '2009-12-03 04:32:30.363' '2009-12-16 04:32:30.363'
10 12 'Iphone' 'I_phone' '2009-12-03 04:32:30.363' '2009-12-15 04:32:30.363'
now if i query for a record like
I_phone
i should get
Prv Detail I_pad row
11 23 'Ipad' 'I_pad' '2009-12-03 04:32:30.363' '2009-12-11 04:32:30.363'
Current Detail I_phone
10 12 'Iphone' 'I_phone' '2009-12-03 04:32:30.363' '2009-12-15 04:32:30.363'
Next Record Speakers
9 22 'Speakers' 'Speakers' '2009-12-03 04:32:30.363' '2009-12-16 04:32:30.363'
I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50. insert into Table values('arun's',20) My sqlserver is giving me an error instead of inserting the row. How will you solve this problem?
I am trying to figure out how to do looping in SQL.
I have table like below:
ID System Material
1 Floor Wood
1 Floor Carpet
1 Wall Dry wall
1 Wall Paper
2 Floor Wood
2 Floor Carpet
I 'd like to end up with results like:
ID System Material
1 Floor Wood, Carpet
1 Wall Dry Wall, Paper
2 Floor Wood, Carpet
Any suggestions?
Thanks,
I need Insert rows in the OrderDetails Table based on values in the Orders Table
In the Orders table i have a columns called OrderID and ISale.
In the OrdersDetails i have columns called OrderID and SaleType
For each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 1, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value K and another row with the value KD.
That is a row will be added and the value in the SalesType column will be K, also a second row will be added and the value in the SalesType column will be KD
Also for each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 0, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value Q and another row with the value QD
That is a row will be added and the value in the SalesType column will be Q, also a second row will be added and the value in the SalesType column will be QD.
I need a SQL Script to accomplish this. thanks
I imagine a data-retrieval scenario where data destined for several different tables are collected and initially placed into one 'collector' table (say, ALLDATA); a stored procedure then kicks in and passes the records to individual destinations. For example, I might want to have data for two persons, Ann and Betty, come in and be routed to table_ann and table_betty respectively, with the correspondence stored in table LOOKUP:
id output_table
Ann table_ann
Betty table_betty
How could this be implemented? Perhaps with some kind of loop over the rows of LOOKUP, with table name retrieved and entered into a (EXEC-written?) query
insert into <table_name>
from alldata
where id in (select distinct id
from lookup
where output_table = <table_name>)
But how could one iterate over the list of table names? (These could be placed in table, of course, and the question become 'how could one iterate over a table's rows?')
I hope that this is an easy question for SQL Server pros, and will be grateful for a brief pointer/code snippet. (I may have given more background then necessary, but perhaps there are better solutions available there as well?)
Thanks a lot!
HiIs there any way to script a table (with EM or Management studio) alongwith data contained in the table (rows values)?J
View 1 Replies View RelatedI need one query:
create table #task(TaskId bigint unique, Name varchar(2000))
insert into #task values(1, 'Text Text Text Text Text Text Text <<Name>> Text Text Text <<Salary>>')
insert into #task values(2, 'Text Text Text <<Name>> Text Text Text Text <<Company>> Text Text Text <<Salary>> Text Text Text')
[Code] ....
Now I need to create an inline function who resolve the task name with appropriate values and return me the resolved task name
select * from fn_TaskResolver(1, 'Text Text Text Text Text Text Text <<Name>> Text Text Text <<Salary>>')
I try this function but its return multiple rows as i just want to return one row. as I have big data set so i don't want to use scaler or Multi Line function.
create function fn_TaskResolver(@TaskId bigint, @name varchar(2000)
Return table
as
return
[Code] ....
I am a newbie to Sql server and i am having a task where my current table with always two rows existing and ID column as primary key looks like below:
ID PlateNo Type Image Name
27 455 User img1.jpg
32 542 Alternative img2.jpg
And i want a sql query to modify my table so that the data should be like as shown below:
ID PlateNo Type Image Name
27 542 Alternative img2.jpg
32 455 User img1.jpg
I need one query...
create table #task(TaskId bigint unique, Name varchar(2000))
insert into #task values(1, 'Text Text Text Text Text Text Text <<Name>> Text Text Text <<Salary>>')
insert into #task values(2, 'Text Text Text <<Name>> Text Text Text Text <<Company>> Text Text Text <<Salary>> Text Text Text')
-- select * from #task
[Code] ....
Now I need to create an inline function who resolve the task name with appropriate values and return me the resolved task name
select * from fn_TaskResolver(1, 'Text Text Text Text Text Text Text <<Name>> Text Text Text <<Salary>>')
I try this function but its return multiple rows as i just want to return one row. as I have big data set so i don't want to use scaler or Multi Line function.
create function fn_TaskResolver(@TaskId bigint, @name varchar(2000)
Return table
as
return
(
with data as
[Code] ....
Hi,
I am facing a peculier problem. I have 3 records in my table. when i am trying to fetch the top 2 its able to fetch the records. but when trying fro moire than 2 (say top 3 or just the *) it say time out. can any one help me out in this regard.
Below is the error that I get when tryong to open the record from SSMS
SQL Execution Error.
Executed SQL statement: SELECT Transaction_ID, tril_gid, WorkGroup_ID, CreatedBy, CreatedDate, ModifiedBy, ModifiedDate, LCID FROM Symp_TransactionHeader
Error Source: .Net SqlClient Data Provider
Error Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
---------------------------
OK Help
---------------------------
Thanks,
Rahul Jha
I have a table with this info:
NrCard numberPersonAuto123456789101112
11111111111111111111User1VW Jetta6,46,46,46,45,825,825,825,825,825,825,826,4
22222222222222222222User2Honda CR-V 13,2113,2113,2112,0112,0112,0112,0112,0112,0112,0113,2113,21
How I can get this result:
NrCard numberPersonAutomonthvalue
11111111111111111111User1VW Jetta16,4
11111111111111111111User1VW Jetta26,4
11111111111111111111User1VW Jetta36,4
11111111111111111111User1VW Jetta45,82
11111111111111111111User1VW Jetta55,82
11111111111111111111User1VW Jetta65,82
[code]....
Should I use unpivot or pivot?
I have a form to assign JOB SITES to previously created PROJECT. The JOB SITES appear in the DataList as it varies based on customer. It can be 3 to 50 JOB SITES per PROJECT.
I have "PROJECT" table with all necessary fields for project information and "JOBSITES" table for job sites. I also created a new table called "PROJECTSITES" which has only 2 columns: "ProjectId" and "SiteId".
What I am trying to do is to insert multiple rows into that "PROJECTSITES" table based on which checkbox was checked. The checkbox is located next to each site and I want to be able to select only the ones I need. Btw the Datalist is located inside of a formview and has it's own datasource which already distincts which JOBSITES to display.
Sample:
ProjectId - SiteId
1 - 5
1 - 9
1 - 16
1 - 18
1 - 20
1 - 27
1 - 31
ProjectId stays the same, only values for SiteId are being different.
I hope I explaining it right. Do I have to use some sort of loop to go through the automatically populated DataList records and how do I make a multiple inserts to database table? We use SQL Server 2005 and VB for code behind. Please ask if I missed on some information. Thank you in advance.
Hi All,
I have following problem
please help me to resolve it.
There is table for shipping
as follows:
City
Kg
Rate(rs)
Rajkot
1
25.00
Rajkot
2
30.00
Rajkot
3
42.50
Ahemedabad
1
42.50
Ahemedabad
2
55.00
Ahemedabad
3
67.50
Ahemedabad
4
80.00
Goa
1
90.00
Goa
2
105.00
Goa
3
120.00
Gondal
1
25.00
Gondal
2
30.00
Gondal
3
42.50
Morbi
1
25.00
Morbi
2
30.00
Morbi
3
42.50
Gandhinagar
1
42.50
Gandhinagar
2
55.00
Gandhinagar
3
67.50
Gandhinagar
4
80.00
We need to display
the table in html page using any Asp.Net language.
The result table should be:
City(s)
1
2
3
4
Rajkot,Gondal,Morbi
25.00
30.00
42.50
-
Ahemedabad,Gandhinagar
42.50
55.00
67.50
80.00
Goa
90.00
105.00
120.00
-
Baruch
70.25
80.00
92.00
120.50
Description:
- Display all the cities
together for which all the shipping charges for (1-4) kgs are same. The range
of kgs is not fixed.
Reply as soon as possible.
Thanks
I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.
Example:
Temp table: (Contains only one field with all distinct values in table 1)
Days_in_warehouse
20
30
40
Table 1 :
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20
2 5 30
3 7 40
Updated Table 1:
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20 20
1 10 20 30
1 10 20 40
2 5 30 20
2 5 30 30
2 5 30 40
3 7 40 20
3 7 40 30
3 7 40 40
how can I update Table 1 to get desired results?
I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.
Example:
Temp table: (Contains only one field with all distinct values in table 1)
Days_in_warehouse
20
30
40
Table 1 :
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20
2 5 30
3 7 40
Updated Table 1:
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20 20
1 10 20 30
1 10 20 40
2 5 30 20
2 5 30 30
2 5 30 40
3 7 40 20
3 7 40 30
3 7 40 40
How can I update Table 1 to see desired results?
The objective is to identify orders where an order fee has been applied incorrectly. I have multiple orders per customer, my table contains an orderID and a customerID. Currently if the customer places additional orders before the previous orders have been closed/cancelled, then additional fees are being applied.
Let's say I'm comparing order #1 to order #2. I need to identify these rows where the following is true:-
The CustID is the same.
Order #2 has a more recent order date.
Order #2 has a FeeDate Before the CancelledDate of Order #1 (or Order #1 has no cancellation date).
So in the table the orderID:2835692 of CustID: 24643 has a valid order fee. But all the subsequently placed orders have fees which were applied before the first order was cancelled and so I want to update the FeeInvalid column with a 'Y'. The first fee will always be valid.
I think I understand why the code I am trying doesn't achieve the result I want but I can't figure out how to write it correctly. Below is one example of code I've tried and also code to create the table and insert some test data.
update t1
SET FeeInvalid = 'Y'
FROM MockData t1 Join MockData t2 on t1.CustID = t2.CustID
WHERE t1.CustID = t2.CustID
AND t2.OrderDate > t1.OrderDate
AND t2.FeeDate > t1.CancelledDate
CREATE TABLE [dbo].[MockData](
[OrderID] [float] NULL,
[code]....
I have the following variables VehicleID, TransactDate, TransactTime, OdometerReading, TransactCity, TransactState.
VehicleID is the unique vehicle ID, OdometerReading is the Odometer Reading, and the others are information related to the transaction time and location of the fuel card (similar to a credit card).
The records will be first grouped and sorted by VehicleID, TransactDate, TransactTime and OdometerReading. Then all records where the Vehicle ID and TransactDate is same for consecutive rows, AND TransactCity or TransactState are different for consecutive rows should be printed.
I also would like to add two derived variables.
1. Miles will be a derived variable that is the difference between consecutive odometer readings for the same Vehicle ID.
2. TimeDiff will be the second derived variable that will categorize the time difference for a particular vehicle on the same day.
My report should look like:
VehID TrDt TrTime TimeDiff Odometer Miles TrCity TrState
1296 1/30/2008 08:22:42 0:00:00 18301 000 Omaha NE
1296 1/30/2008 15:22:46 7:00:04 18560 259 KEARNEY NE
Can someone please help me here?
Thanks,
Romakanta
Here are two tables:
TABLE_A
[ac] [dest]
1 A
1
1
2
2
3
3 B
3
(ac=1, dest=A; ac=3, dest=B)
The space between '1' and 'A' isn't showing up correctly.
TABLE_B
[fleet] [ron]
1 A
1 A
1 A
1 A
1 A
2
2
2
2
3 B
3 B
(fleet=1, ron=A; fleet=3, ron=B; etc.etc.)
I would like to fill TABLE_B's column "ron" by referring to TABLE_A's column "dest".ac = fleet, and for each ac, I would like to loop through the 'dest' column in TABLE_A from top to bottom to get the top most value. If there are no values (like with ac = 2), then value is blank.
For 1, the value is A.
For 2, the value is blank.
For 3, the value is B.
Therefore, in TABLE_B, for all 'ron' for fleet=1, the value is filled A.
For all 'ron' for fleet=2, the value is blank.
For all 'ron' for fleet=3, the value is B.
- create variable 'v'
- where ac=fleet, loop through 'dest' from top to bottom to get top-most value. variable 'v' = the value.
- in TABLE_B, for each ac=fleet, insert variable 'v' into the 'ron' column
I've been looking online and cannot find any help / resources with this so I brought it here :D
I'm looking for help in creating a Cursor (this will be inside a SP) that will loop through the records of a "Table" (Temporary or Retrieved) and for each row that is looped through I can use it's values to do inserts against a few other tables.
Any resources / help would be great! I work best by example.
Hello, Its hard trying to explain this.
I have 3 tables
Table 1 is where the users are stored, each user has a username and a userrank
Table 2 is where the points that decides the userrank are stored
Table 3 contains the available userranks like this
Table 1 (user_list) looks briefly like this:username nvarchar(20),userrank int, -- Reference to Table3 id... alot more fields
Table 2 (settings_profile) looks like this:username nvarchar(20),total_active_points int,... some more fields
Table 3 (data_ranks) looks like this:id int primary key auto inc,rankname nvarchar(20),min_pts int,max_pts int
Points get added to table 2 whenever they do something that generates points on the site. Points also get withdrawn every 7 days, so a user can only collect points for 7 days, on the 8th day, all points he earned on the 1st day is reduced from the current points with this code:
WHILE (SELECT @username = username, @id = id, @temp1 = ap_sentmails, @temp2 = ap_createdthreads, @temp3 = ap_createdanswers, @temp4 = ap_signguestbook, @temp5 = ap_blogcomment, @temp6 = ap_createblogentry, @temp7 = ap_profilefirsttime, @temp8 = ap_profilephoto, @temp9 = ap_activateguestbook, @temp10 = ap_addnewfriend, @temp11 = ap_superguruvote, @temp12 = ap_forumtopicvote, @temp13 = ap_labervote, @temp14 = ap_funstuffitemvote, @temp15 = ap_movievote, @temp16 = ap_actorvote, @temp17 = ap_money_new WHERE (created < Dateadd(dd, -7, @todaysdate))BEGINSET @sum = 0SET @sum = @temp1 + @temp2 + @temp3 + @temp4 + @temp5 + @temp6 + @temp7 + @temp8 + @temp9 + @temp10 + @temp11 + @temp12 + @temp13 + @temp14 + @temp15 + @temp16 + @temp17UPDATE settings_profile SET total_active_points = total_active_points - @sum WHERE (username = @username)DELETE FROM konto_daylist WHERE (id = @id)END
Now my question is this, i want to loop thru the table A, collect all usernames inside of it, then run it against table b and table c to determine the current rank of the user.Something like this...
DECLARE @username nvarchar(20)DECLARE @pts int, @rank int
...something that starts a loop thru table A (user_list) and get the username into @username...
SELECT @pts = total_active_points FROM settings_profile WHERE (username = @username)-- Determine the rank here, by compairing the points the user have against the pointstabel in table data_ranksSELECT @rank = id FROM data_ranks WHERE (pts_min => @pts AND pts_max < @pts)UPDATE user_list SET rank = @rank WHERE (username = @username)
...next persion in the loop...
This SP runs once a day and will first reduce the points from 8days ago, then it will run thru all the users and determine their new rank...
But how do i loop thru all the users? with a cursor?
Hello,
I am a little new at T-SQL. and I could use a suggestion on the best way to accomplish this task. I have an application where I must loop through a table in Microsoft SQL Server 2005, find the records that match and break them up into groups where the value of the Thickness field is in groups of ( <=8).
Lets say I have 100 records and the table contains sacks marked A, B, C, and D. Within Sack A is 6 records. Each of the 6 records has a thickness column with a value between 0.5 to 1.0 (my example shows 2) I have a column called bundle that I must update to show a 1 for the first group of (<=8) inches thick a 2 for the second group (<=8) inches thick and so on. Then repeat the process for sacks B, C and D.
The table itself has the following
Order Number |Zipcode |Sack(A, B, C,or D)| Thickness |Bundle|
1 |19809 |A | 2 |NULL |
2 |19809 |A | 2 |NULL
3 |19809 |A | 2 |NULL
4 |19809 |A | 2 |NULL
5 |19809 |A | 2 |NULL
6 |19809 |A | 2 |NULL |
7 |19721 |B | 4 |NULL |
8 |19721 |B | 3 |NULL |
9 |19721 |B | 2 |NULL |
10 |19721 |B | 5 |NULL |
11 |19721 |B | 2 |NULL |
12 |19721 |B | 2 |NULL |
What I need to do is sum the thickness until it gets to less than 8 and update bundle with a 1. The result would be 4 records and the table would then look like this:
Order Number |Zipcode | Sack(A, B, C,or D)| Thickness |Bundle|
1 |19809 |A | 2 |1 |
2 |19809 |A | 2 |1
3 |19809 |A | 2 |1
4 |19809 |A | 2 |1
5 |19809 |A | 2 |NULL
6 |19809 |A | 2 |NULL |
7 |19721 |B | 4 |NULL |
8 |19721 |B | 3 |NULL |
9 |19721 |B | 2 |NULL |
10 |19721 |B | 5 |NULL |
11 |19721 |B | 2 |NULL |
12 |19721 |B | 2 |NULL |
Notice there are two records that are not bundles for sack A. I need to place them in a separate bundle called 2. The result will be as follows
Order Number |Zipcode | Sack(A, B, C,or D)| Thickness |Bundle|
1 |19809 |A | 2 |1 |
2 |19809 |A | 2 |1
3 |19809 |A | 2 |1
4 |19809 |A | 2 |1
5 |19809 |A | 2 |2
6 |19809 |A | 2 |2 |
7 |19721 |B | 4 |NULL|
8 |19721 |B | 3 |NULL
9 |19721 |B | 2 |NULL
10 |19721 |B | 5 |NULL |
11 |19721 |B | 2 |NULL |
12 |19721 |B | 2 |NULL |
Now Sack A is complete so I must move on to Sack B. The first two records total to 7 and adding another record would move the thickness past 8 so I must update the bundle for only the first two records with a 1. The next two total to seven also and the following 2 total to four. We must set those bundles to 1, 2, 3 as follows
1 |19809 |A | 2 |1 |
2 |19809 |A | 2 |1
3 |19809 |A | 2 |1
4 |19809 |A | 2 |1
5 |19809 |A | 2 |2
6 |19809 |A | 2 |2 |
7 |19721 |B | 4 |1 |
8 |19721 |B | 3 |1 |
9 |19721 |B | 2 |2 |
10 |19721 |B | 5 |2 |
11 |19721 |B | 2 |3 |
12 |19721 |B | 2 |3|
These scenarios just keep repeating until the last record
Thank you for any help you can give me
The process of adding a column with DEFAULT (0) to a table that has 15million records takes a despicable amount of time (too much time) and the transaction log of the database grew to an unacceptable size. I would like to accomplish the same task using this procedure:
·Add the column to the table with null value.
·Loop through the table (500000 records at a time) and SET the value in the newly added column to 0.
·Issue a commit statement after each batch
·Issue a checkpoint statement after each batch.
·Alter the table and SET the column to NOT Null DEFAULT (0)
Here is my Sample script
ALTER TABLE EMPLOYEE ADD EZEVALUE NUMERIC (9,6) NULL
Go
Loop
UPDATE EMPLOYEE SET EZEVALUE = 0
Commit Tan
CHECKPOINT
END (Repeat the loop until the rows in EMPLOYEE have the value 0)
Go
ALTER TABLE EMPLOYEE ALTER COLUMN EZEVALUE NUMERIC (9,6) NOT NULL DEFAULT (0)
My problem is with the loop section of this script. How do I structure the loop section of this script to loop through the employee table and update the EZEVALUE column 500000 rows at a time, issue a Commit Tran and a CHECKPOINT statement until the whole table has been updated. Does anyone out there know how to accomplish this task? Any information would be greatly appreciated.
Thanks in advance
Hi,
If i have an SP called mySP that accepts one parameter @param
If I have a table of paramaters with only one column like this:
Param1
Param2
..
ParamN
How do I do if I want to execute the SP on all the table fields:
some thing like this:
Exec my SP 'Param1'
Exec mySP 'Param2'
...
Exec mySP 'ParamN'
I want that automatically since the parameters are going to be in a table called myTblParams
Notice that I don t want to pass all the parameters to the SP just once but only one value each time I execute the SP since mySP ccepts only one parameter.
Thanks a lot for guidelines
I have 2 identical tables one contains current settings, the other contains all historical settings.I could create a union view to display the current values from table A and all historical values from table B, butthat would also require a Variable to hold the tblid for both select statements.
Q. Can this be done with one joined or conditional select statement?
DECLARE @tblid int = 501
SELECT 1,2,3,4,'CurrentSetting'
FROM TableA ta
WHERE tblid = @tblid
UNION
SELECT 1,2,3,4,'PreviosSetting'
FROM Tableb tb
WHERE tblid = @tblid
I have a large table that looks like this.
(ID INT NOT NULL IDENTITY(1,1),PK INT , pocket VARCHAR(10))
1, 1, p12, 1, p23, 2, p34, 2, p45, 3, p56, 3, p67, 4, p78, 5, p19, 5, p210,5, p83
i would like to loop through the table and concatenate the pocket filed for all the records that has the same pk. and insert the pk and the concatenated string into another table in a timely manner.
can anyone help?
i have to use temporary tables. (not cursors-with cursors i know how to di it, but i want with temporary table)
thanks in advance
I'm stuck. I have a table that I want to pull some info from that I don''t know how to.
There are two colomuns, one is the call_id column which is not unique and the other is the call_status column which again is not unique. The call_status column can have several values, they are ('1 NEW','3 3RD RESPONDED','7 3RD RESOLVED','6 PENDING','3 SEC RESPONDED','7 SEC RESOLVED').
i.e example, this is the existing data.
Call_id Call_Status
555555 3 3RD RESPONDED
235252 7 SEC RESOLVED
555555 7 3RD RESOLVED
325252 6 PENDING
555555 6 PENDING
325235 3 SEC RESPONDED
555555 1 NEW
This is the data I want...
Call_id Call_Status
555555 3 3RD RESPONDED
555555 6 PENDING
555555 7 3RD RESOLVED
The call_id could be any number, I only want the 6 PENDING rows where there are other rows for that call_id which have either 3 3RD RESPONDED or 7 3RD RESOLVED. If someone knows how it would be a great help.
Cheers,
Chris
Here is some data that will explain what I want to do:
Input Data:
Part ColorCode
A100 123
A100 456
A100 789
B100 456
C100 123
C100 456
Output Data:
Part ColorCode
A100 123;456;789
B100 456
C100 123;456
I am relatively new to SQL and as a project I have been asked to create the SQL for a simple database to record train details. I want to implement a check constraint which will prevent data from being inserted into a table if the weight of the train is more than the maximum towing weight of the locomotive. FOr instance, I need to add the unladen weight and maximum capacity of each wagon (located in the wagon type table) and compare it against the locomotive maximum pulling weight (the locomotive class table). I have the following SQL but it will not work:
check((select SUM(fwt.unladen_weight+fwt.maximum_payload) from
hauls as h,freight_wagon as fw,freight_wagon_type as fwt,train as t where
h.freight_wagon_serial_number = fw.freight_wagon_serial_number and
fw.freight_wagon_type = fwt.freight_wagon_type and
h.train_number = t.train_number) <
(select lc.maximum_towing_weight from locomotive_class as lc,locomotive as l,train as t where
lc.locomotive_class = l.locomotive_class and l.locomotive_serial_number = t.locomotive_serial_number))
The hauls table is where the constraint has been placed and is the intermediary table between train and freight wagon.
I may not have explained this very well; but in short, i need to compare the sum of two values in one table against a values located in another table...At present I keep getting a message telling me the sub query cannot return more than one row.
I have two tables A(uname,address,full_name) and B(uname,full_name). I want to update table A for all matching case of uname in table B.
View 5 Replies View RelatedI have a master table containing details of over 800000 surveys made up of approximately 400 distinct document names and versions. Each document can have as few as 10 questions but as many as 150. Each question represents one row.
My challenge is to create a separate spreadsheet for each of the 400 distinct document names and versions containing all the rows and columns present in the master table. The largest number of rows would be around 150 and therefore each spreadsheet will not be very big.
e.g. in my sample data below, i will need to create individual Excel files named as follows . . .
"Document1Version1.xlsx" containing all the column names and 6 rows for the 6 questions relating to Document 1 version 1
"Document1Version2.xlsx" containing all the column names and 8 rows for the 8 questions relating to Document 1 version 2
"Document2Version1.xlsx" containing all the column names and 4 rows for the 4 questions relating to Document 2 version 1
I assume that one of the first things is to create a lookup of the distinct document names and versions assign some variables and then use this lookup to loop through and sequentially filter the master table data ready for creating the individual Excel files.
--CREATE TEMP TABLE FOR EXAMPLE
IF OBJECT_ID('tempdb..#excelTest') IS NOT NULL DROP TABLE #excelTest
CREATE TABLE #excelTest (
[rowID] [nvarchar](10) NULL,
[docName] [nvarchar](50) NULL,
[Code] .....
--Output
rowIDdocNamedocVersionquestionblankField
1document11q1NULL
2document11q2NULL
3document11q3NULL
4document11q4NULL
5document11q5NULL
6document11q6NULL
[Code] .....