I have uninstalled and reinstalled several times and I can't get Reporting Services to create the virtual directories in Default Web Site, instead it creates a new web site called Report Server with the virtual directories under that, this Report Server website points to C:Program FilesMicrosoft SQL ServerInetPubwwwroot. Any ideas as to why this happens? My Default Web Site is called Default Website from the initial IIS install , I am on XP Pro SP 2 with IIS 5.1. This is an issue for me since I don't want to have on another site that doesn't have the aspnet mapings.
I am dumbfounded and can't figure out what to do to make it not do that with the default configuration option checked during install. Should I uninstall and reinstall again and not use the default configuration?
I contact you because we installed Report Services 2012 and after configuring werb service URL, database, Report Manager URLs... the URLs linked to the Report server + Report Manager does not work.After searching in IIS, it seems that even if virtual directories are created, they are linked to directories which does not exist :- c:Program FilesMicrosoft SQL ServerMSRS11.ReportReporting Services does contain only LogFiles and RSTempFiles directories.
The above chart has three Values in it (slightly late in pink, rather late in hot pink and very late in red). Because of the ordering of these values the red very late values can't be seen. When I shuffle the order around slightly they are indeed there:
...This report runs dynamically for one of a number of activities the user can select, as such I have no way of knowing which of these series will be at the lower end of the scale and which will be at the higher end. Is it possible to set the Values/Series to be transparent so I can be assured that all will be visible to the user at runtime?
I have installed SQL Server Management Studio 2005 and have beenfinding the equivalent of the Data Transfer Services in SQLServer2000. I think I have worked out that it is in SQL Server IntegrationServices but when I open File-New-Project I do not see the SQL ServerIntegration Services there, though Help assumes that it is availablefor selection when starting a new project..How can I make it visible in the New Project window?I have successfully used the import function so I think this meansthat Inegration Services is there somewhere.I would appreciate some advice,Best wishes, John Morgan
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified. Restored my Reportserver and ReportserverTempDB databases Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script) at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'? Is it possible to migrate from 32bit to 64bit?
I am trying to install SQL 2005 in a 2-node virtual Windows 2003 cluster. I set the cluster up through Virtual Server 2005 with 2 virtual nodes and one virtual domain. The nodes can connect to each other as well as the physical machine. When I try to install a fresh copy of SQL 2005 on my cluster, I get an error every time. The error stops the installation while checking system configuration after installing prerequisites. The log file entry is as follows:
******************************************* Setup Consistency Check Report for Machine: --SERVERNAME-- ******************************************* Article: WMI Service Requirement, Result: CheckPassed Article: MSXML Requirement, Result: CheckPassed Article: Operating System Minimum Level Requirement, Result: CheckPassed Article: Operating System Service Pack Level Requirement, Result: CheckPassed Article: SQL Compatibility With Operating System, Result: CheckPassed Article: Minimum Hardware Requirement, Result: CheckPassed Article: IIS Feature Requirement, Result: Warning Description: IIS is not installed, therefore Report Server feature will be disabled Action: Install IIS in order for Report Server feature to be enabled Article: Pending Reboot Requirement, Result: CheckPassed Article: Performance Monitor Counter Requirement, Result: CheckPassed Article: Default Installation Path Permission Requirement, Result: CheckPassed Article: Internet Explorer Requirement, Result: CheckPassed Article: Check COM+ Catalogue, Result: CheckPassed Article: ASP.Net Registration Requirement, Result: CheckPassed Article: Minimum MDAC Version Requirement, Result: CheckPassed <Func Name='PerformDetections'> 1 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0 Error: Action "InvokeSqlSetupDllAction" threw an exception during execution. Error information reported during run: Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "ComputerList" {"SqlComputers", "", ""} in cache Source File Name: datastoreclusterinfocollector.cpp Compiler Timestamp: Fri Sep 16 13:20:12 2005 Function Name: ClusterInfoCollector::collectClusterVSInfo Source Line Number: 883 ---------------------------------------------------------- Failed to detect VS info due to datastore exception. Source File Name: datastoreclustergroupsproperties.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: ClusterGroupScope.SharedDisks Source Line Number: 56 ---------------------------------------------------------- Failed to find a cluster group that owned shared disk: J: WinException : 2 Error Code: 0x80070002 (2) Windows Error Text: The system cannot find the file specified. Source File Name: datastoreclustergroupsproperties.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: ClusterGroupScope.SharedDisks Source Line Number: 56
We are in the process of doing a side by side installation of the SQLserver 2000 and SQL server 2005 on the same server. To install theReporting services feature of SQL server 2005 requires IIS. We have aseperate web server running IIS that connects to the database server.My question is : can we still install Reporting services on thedatabase server without the IIS?Thank you
Hi, Our team is developing an ASP.NET 1.1 Application that is written using VS2003 but using SQL Server 2005 as database. Can we use a Report Viewer Control that comes with SQL Server 2005 in our ASP.NET 1.1 application? If not, Can some one suggest some alternative way of showing SQL Server 2005 Reports in ASP.NET 1.1 application?
Does anyone know how to beautify the parameter control layouts on a report header?
For example I have a drop down multi selection control for a parameter for a report. I'd like it to be three times as wide. I could just add spaces to the labels but I'd prefer a more elegant solution.
hi, i am using SQL server reporting services 2005. but when i tried to deply onto the report server, i am getting error "rsReportServerServiceUnavailable". can anybody tell me what is the problem. manytimes i m getting this error.
I've been trying to look for information about using an SQL 2005 database with ASP.NET 2.0 - while there are loads of different articles coving configuring a database to use with asp.net, I cannot find anything on securing a sub-folder in my asp.net application. At the moment I am successfully connecting to, and validating users via a login page in my asp.net application, however, this is all pointless since I can still browse to the pages without logging in! I have tried putting in the usual <location> tags in my root web.config file and asp.net throws an error referring to my connection string, I have also tried adding a web.config file to the sub-directory, but that just uses the windows login, and I can't find anything that'll allow me to tie my own login page to it... Arrrgh! Any help will be greatly appreciated! Thanks in advance.
Apologies for the generic subject heading but I have a client who at my suggestion has implemented a reporting solution using SSRS. However, we are now finding serious limitations with this solution, primarily regarding exporting matrix data to Excel. The major concern is that after exporting matrix data you cannot sort, filter or format properly as we cannot repeat the group data, merged cells is also another big problem.
They are now seriously looking at bringing in different technology to address these problems and I was wondering if anybody had any positive ideas, as to how I can provide a way forward and overcome our issues?
Can I easily add an add-in to the existing export options, does SQL 2008 offer any improvements, are there any 3rd party offerings out there?
Service cannot be started. System.TypeInitializationException: The type initializer for 'Microsoft.ReportingServices.Library.Global' threw an exception. ---> System.Configuration.ConfigurationErrorsException: Configuration system failed to initialize ---> System.Configuration.ConfigurationErrorsException: This configuration section cannot be used at this path. This happens when the site administrator has locked access to this section using <location allowOverride="false"> from an inherited configuration file. (C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServerinReportingServicesService.exe.config line 5) at System.Configuration.ConfigurationSchemaErrors.ThrowIfErrors(Boolean ignoreLocal) at System.Configuration.BaseConfigurationRecord.ThrowIfParseErrors(ConfigurationSchemaErrors schemaErrors) at System.Configuration.ClientConfigurationSystem.EnsureInit(String configKey) --- End of inner exception stack trace --- at System.Configuration.ClientConfigurationSystem.EnsureInit(String con...
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any tips would hugely help. I checked this config file and have not seen this info in the file.
Is there a control in SQL Server 2005 Reporting Services similar to Crystal reports Designer control that can be embedded in third party applications that allows their user to design their own reports through the application.
Basically we are using the crystal control in our current software and are looking to move Microsoft reporting services
Your comments would be greatly appreciated. Thanks
I have recently installed SQL Server 2005 on Windows 2003 R2 Server (Standard Edition). When I run Reporting Services Configuration Manager, I get a message "Invalid Namespace". What could be wrong?
I'm using Reporting Services Configuration tool to add the Reporting and ReportingTemb databases. Once the have been created, the tool attempts to upgrade the databases and can not create a script. This are the errors I see from the from the Reporting Services Configuration Tool after creating the databases:
! Verifing Database Version
The Database version (C.0.8.40) does not match your Reporting Services installation. You must upgrade your Reporting Services database.
! Creating upgrade script for database version C.0.8.40
ReportServicesConfigUI.WMIProvider.WMIProviderException: The version does not match a supported version.
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.GenerateDatabaseUpgradeScript(String databaseName, String serverVersion, String& script)
I've reinstalled the entire SQL Server 2005 installation. As part of company installation precodure, SQL 2005 w/o Reporting Services is installed first, followed by SP1. I then perform the SQL Reporting Services installation add-on.
How can we Integrate SQL server 2005 Report builder, Report designer in a custom .Net Application ? . Please Help me.
I want to provide Report Designer, Report builder and Query builder functionalities to my .Net application. How can I Integrate them in my application?
I apologize in advance for the lack of homework before posting, but I am just looking for a quick answer, or a quick point in the right direction to figure this out.
I have a developer from an adjacent team that wants to use Reporting Services in a SQL Server 2005 installation.
From what I found online during what I thought was a definitive search yesterday, I gave him the MSDN SQL Server 2005 DVD and told him that Reporting Services is now part of the standard installation. Which is what my brief search yesterday indicated to me.
He did the installation (full, according to him) and said he could not find Reporting Services.
So, the quick question is...
Where is Reporting Services in SQL Server 2005? I don't have a separate MSDN DVD that contains it as was the case on SQL Server 2000. This further supports my (wavering) position that it is part of the standard installation.
Thoughts? Direction? Collective kicks in the posterior?
I am new to both Reporting Services and Webservices implementation so I am just trying to use a simple example. I found a Webservice on the internet that returns movie information:
Setup: Windows server 2003 SP1, SQL 2005 SP2, Sharepoint Office server 2007, Report Services addin (CTP v9.00.3027).
Using the Report server configuration tool, setting Report Server Virtual directory, end up with RS Configuration tool crashing.
It appears to be happening on the task "Changing Secure connection level", & returns "System.NullReferenceException was unhandled Message: Object reference not set to an instance of an object."
I am working with one example on SQL Server 2005 Reporting Services. I have a stored procedure with two parameters. I want to call this stored procedure from SQL Server Reporting Services 2005.
CREATE PROCEDURE spEmp ( @id int, @name varchar(150) ) AS BEGIN SELECT EmpId, EmpName, EmpSal FROM Emp WHERE EmpId = @id AND EmpName = @name END
I want to pass
@id AND @name
parameters from reporting services form. Can you please give me link / article / steps to follow this in SQL SERVER REPORTING SERVICES 2005 ?
I have downloaded the freeware SQL Server 2005 Express Edition for learning SQL Server. Now I want to get familiar with the BIDS and the reporting services. I want to know whether Express Edition supports these tools. If not then what do i need to have to get the same started?? I have a pc running on Vista.
Help from anyone will be greatly appreciated as I have been looking at the forums for quite a while and i am totally confused in this respect. What is the most uncomplicated way to solve this problem??
Everything installed fine except for the Reporting Services portion of the service pack...
Time: 04/25/2007 16:01:51.575 KB Number: KB921896 Machine: OIGASRVSQL001 OS Version: Microsoft Windows Server 2003 family, Enterprise Edition Service Pack 2 (Build 3790) Package Language: 1033 (ENU) Package Platform: x86 Package SP Level: 2 Package Version: 3042 Command-line parameters specified: Cluster Installation: Yes Log Location on Passive Nodes: (OIGASRVSQL001) C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix (OIGASRVSQL002) C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix
********************************************************************************** Prerequisites Check & Status SQLSupport: Passed
********************************************************************************** Products Detected Language Level Patch Level Platform Edition Setup Support Files ENU 9.2.3042 x86 Database Services (OMNIDB1) ENU RTM 2005.090.1399.00 x86 ENTERPRISE Reporting Services (OMNIDB1) ENU RTM 9.00.1399.00 x86 ENTERPRISE Notification Services ENU SP2 9.00.3042.00 x86 ENTERPRISE Integration Services ENU SP2 9.00.3042.00 x86 ENTERPRISE SQL Server Native Client ENU 9.00.3042.00 x86 Client Components ENU SP2 9.2.3042 x86 ENTERPRISE MSXML 6.0 Parser ENU 6.10.1129.0 x86 SQLXML4 ENU 9.00.3042.00 x86 Backward Compatibility ENU 8.05.2004 x86 Microsoft SQL Server VSS Writer ENU 9.00.3042.00 x86
********************************************************************************** Products Disqualified & Reason Product Reason Database Services (OMNIDB1) This installation must be run from the active node. You are running it from a passive node. To proceed, cancel the installation and run it again from the active node.
********************************************************************************** Processes Locking Files Process Name Feature Type User Name PID wmiprvse.exe Reporting Services Application 3224
********************************************************************************** Product Installation Status Product : Setup Support Files Product Version (Previous): 3042 Product Version (Final) : Status : Not Selected Log File : Error Description : ---------------------------------------------------------------------------------- Product : Database Services (OMNIDB1) Product Version (Previous): 1399 Product Version (Final) : Status : NA Log File : Error Description : This installation must be run from the active node. You are running it from a passive node. To proceed, cancel the installation and run it again from the active node. ---------------------------------------------------------------------------------- Product : Reporting Services (OMNIDB1) Product Version (Previous): 1399 Product Version (Final) : Status : Failure Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRS9_Hotfix_KB921896_sqlrun_rs.msp.log Error Number : 2228 Error Description : MSP Error: 2228 The installer has encountered an unexpected error. The error code is 2228. Database: . Unknown table '_sqlDomainGroup' in SQL query: SELECT `Property`, `Component_`, `RestoreProperty`, `Service`, `ServiceName` FROM `_sqlDomainGroup` ORDER BY `Order`. ---------------------------------------------------------------------------------- Product : Notification Services Product Version (Previous): 3042 Product Version (Final) : Status : Not Selected Log File : Error Description : ---------------------------------------------------------------------------------- Product : Integration Services Product Version (Previous): 3042 Product Version (Final) : Status : Not Selected Log File : Error Description : ---------------------------------------------------------------------------------- Product : SQL Server Native Client Product Version (Previous): 3042 Product Version (Final) : Status : Not Selected Log File : Error Description : ---------------------------------------------------------------------------------- Product : Client Components Product Version (Previous): 3042 Product Version (Final) : Status : Not Selected Log File : Error Description : ---------------------------------------------------------------------------------- Product : MSXML 6.0 Parser Product Version (Previous): 1129 Product Version (Final) : Status : Not Selected Log File : Error Description : ---------------------------------------------------------------------------------- Product : SQLXML4 Product Version (Previous): 3042 Product Version (Final) : Status : Not Selected Log File : Error Description : ---------------------------------------------------------------------------------- Product : Backward Compatibility Product Version (Previous): 2004 Product Version (Final) : Status : Not Selected Log File : Error Description : ---------------------------------------------------------------------------------- Product : Microsoft SQL Server VSS Writer Product Version (Previous): 3042 Product Version (Final) : Status : Not Selected Log File : Error Description : ----------------------------------------------------------------------------------
********************************************************************************** Summary One or more products failed to install, see above for details Exit Code Returned: 2228
I've tried to install all features in the SQL Server 2005 to run on Windows Vista. The Reporting Services failed to install. I think it is because of the IIS 7.0 that 's not recognised by SQL Server.
Is there anyone who have had the same problem and is there anyone who have a suggestion to solve this problem?
