Hello,
am using c# and a Stored proceedure in MS SQL 2005.
For data size i used the varchar (max) in my stored proceedure. But in the c# class. What do i use ? Here is a line of my code
thanks
Ehi
command.Parameters.Add(new SqlParameter("@csv", SqlDbType.VarChar, 8000, "recipients"));
Hello,
We are using Exec(@sql) with @sql varchar(8000), but 8000 is not enough. Like query get cut off in the middle of the script. We need more than that. Is there any way to store more than 8000 characters in the variable ?
We use SQL Server 7.
Thanx in advance.
Hi all!
I'm using this store proc to get a pivot table in SQL:
USE [m0851System]
GO
/****** Object: StoredProcedure [dbo].[sp_CrossTabIntoTable] Script Date: 01/25/2008 09:59:37 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[sp_CrossTabIntoTable]
@select varchar(8000),
@sumfunc varchar(100),
@pivot varchar(100),
@table varchar(100)
-- AJOUTÉ PAR JULIEN BONNIER 17 juillet 2007
,@tbl_result varchar(100),
@fld_sufx varchar(10)
-- FIN JULIEN BONNIER
AS
--DECLARE @sql varchar(8000), @delim varchar(1)
DECLARE @sql varchar(8000), @delim varchar(1)
SET NOCOUNT ON
SET ANSI_WARNINGS OFF
-- AJOUTÉ PAR JULIEN BONNIER 17 juillet 2007
-- MODIFIÉ PAR JULIEN BONNIER 25 janvier 2008 (ajout de la clause case)
IF LEFT(@tbl_result,1)='#'
BEGIN
IF EXISTS(SELECT name FROM tempdb.dbo.sysobjects WHERE type='U' AND name='' + @tbl_result + '')
EXEC ('DROP TABLE ' + @tbl_result + '')
END
ELSE
BEGIN
IF EXISTS(SELECT name FROM sysobjects WHERE type='U' AND name='' + @tbl_result + '')
EXEC ('DROP TABLE ' + @tbl_result + '')
END
-- FIN JULIEN BONNIER
EXEC ('SELECT ' + @pivot + ' AS pvt INTO ##pivot FROM ' + @table + ' WHERE 1=2')
EXEC ('INSERT INTO ##pivot SELECT DISTINCT ' + @pivot + ' FROM ' + @table + ' WHERE '
+ @pivot + ' Is Not Null')
SELECT @sql='', @sumfunc=stuff(@sumfunc, len(@sumfunc), 1, ' END)' )
SELECT @delim=CASE Sign( CharIndex('char', data_type)+CharIndex('date', data_type) )
WHEN 0 THEN '' ELSE '''' END
FROM tempdb.information_schema.columns
WHERE table_name='##pivot' AND column_name='pvt'
-- MODIFIÉ PAR JULIEN BONNIER 18 juillet 2007
--SELECT @sql=@sql + '''' + convert(varchar(100), pvt) + ''' = ' +
SELECT @sql=@sql + '''' + convert(varchar(100), pvt) + '' + @fld_sufx + ''' = ' +
stuff(@sumfunc,charindex( '(', @sumfunc )+1, 0, ' CASE ' + @pivot + ' WHEN '
+ @delim + convert(varchar(100), pvt) + @delim + ' THEN ' ) + ', ' FROM ##pivot
-- FIN JULIEN BONNIER
-- AJOUTÉ PAR JULIEN BONNIER 15 octobre 2007
ORDER BY pvt
-- FIN JULIEN BONNIER
DROP TABLE ##pivot
SELECT @sql=left(@sql, len(@sql)-1)
PRINT(LEN(@sql))
SELECT @select=stuff(@select, charindex(' FROM ', @select)+1, 0, ', ' + @sql + ' ')
-- AJOUTÉ PAR JULIEN BONNIER 17 juillet 2007
SELECT @select=stuff(@select, charindex(' FROM ', @select), 6, ' INTO ' + @tbl_result + ' FROM ')
-- FIN JULIEN BONNIER
--EXEC (@select)
PRINT('YOYO'+@select)
RETURN
SET ANSI_WARNINGS ON
But now my @sql and @select that are varchar(8000) get bigger than 8000 for one of my reports... So my query fails ever times.
What can I do to fix it ?
Thanks in advance.
Or Tho
Hi ?
i have created a store procedure that will copy the proceduers of one database to another database. it's working fine, but i am hving problem to run the the store proceduer when character lenght goes more then 8000 words. i have couple of proceuder that has words more then 8000, is there any good and short way to do solve this problem
Thanks and looking forward.
-MALIK
if a user chooses to request a lot of customers to report on say from a multi select listbox - what is the best way to pass this list to my stored proc? Looking for suggestions.
thanks,
Hi,
I have a problem with a text string which is more than 8000 chars.
I am taking this string as an input from an application.so,I cannot define a local variable as text or ntext and varchar has limitation of only 8000 char.
Can anyone help me in dealing with this situation.
Also,I cannot break the string at application level.I wish if I could solve it at db level somehow?
TIA
pd
Is there a way to create a datatype other than varchar that is greater than 8000? :o
View 3 Replies View RelatedI'm wondering if there's a way to use the string function replicate() to produce an output greater than 8000 bytes. From the documentation REPLICATE returns a varchar of max 8000 but I'm told there's a way to stop this restriction.
My mentor has been giving me tasks to try and accomplish and for this one I'm to create a stored procedure with no limitations, however I'm stuck at this replicate() problem.
Any help or guidance would be great.
Thanks
Hi,
I have a MDX query which is of an aprox length of 10000 characters. I
have to execute the query from within the stored procedure in sql. To
run this query I use the openrowset method.
If the length of my query is less than 8000 characters my query
executes perfectly, but the moment it exceeds 8000 characters it stop
working. Please suggest a solution for the same.
Sample Code:
declare @mdxqry varchar(8000)
declare @SearchCond varchar(8000)
set @SearchCond = @SearchCond + '
[ProductsAccounts].CurrentMember.properties("AS Date") <= "' + @TDate
+ '" '
set @mdxqry = '''WITH ' +
'MEMBER [Measures].[Difference] as ''''[Measures].[Expected Interest
Amount] - [Measures].[Adjusted Interest]'''' ' +
'MEMBER [Measures].[Loan Closed within Report Period] as ' +
'''''iif(cdate([ProductsAccounts].CurrentMember.properties("Closed
Date")) < cdate("' + @ToDate + '"), "Yes", "No")''''' +
'MEMBER [Measures].[ClosedBeforeLastInstallment] as
''''iif([Measures].[Loan Closed Before Last Instal]=1, "Yes", "No")''''
' +
'SELECT ' +
'{[Measures].[Expected Interest Amount], [Measures].[Adjusted
Interest], [Measures].[Difference], ' +
'[Measures].[Zero Interest Transactions],
[Measures].[ClosedBeforeLastInstallment], ' +
'[Measures].[Loan Closed within Report Period]} ON 0, '
set @mdxqry = @mdxqry +
'{Filter([ProductsAccounts].[Account Id].Members, (' + @SearchCond +
'))} on 2, ' +
@BranchFilter +
'FROM InterestAnalysis'''
set @mdxqry = 'SELECT a.* FROM
OpenRowset(''MSOLAP'',''DATASOURCE="SERVERNAME"; Initial
Catalog="DATABASENAME";'',' + @mdxqry + ') as a'
exec(@mdxqry)
I have already tried splitting my query into smalled chunks and
executing it, but still I face the same problem.
This is how I have Done it:
declare @mdxqry1 varchar(8000)
declare @mdxqry2 varchar(8000)
declare @SearchCond varchar(8000)
set @SearchCond = @SearchCond + '
[ProductsAccounts].CurrentMember.properties("AS Date") <= "' + @TDate
+ '" '
set @mdxqry1 = '''WITH ' +
'MEMBER [Measures].[Difference] as ''''[Measures].[Expected Interest
Amount] - [Measures].[Adjusted Interest]'''' ' +
'MEMBER [Measures].[Loan Closed within Report Period] as ' +
'''''iif(cdate([ProductsAccounts].CurrentMember.properties("Closed
Date")) < cdate("' + @ToDate + '"), "Yes", "No")''''' +
'MEMBER [Measures].[ClosedBeforeLastInstallment] as
''''iif([Measures].[Loan Closed Before Last Instal]=1, "Yes", "No")''''
'
set @mdxqry2 = 'SELECT ' +
'{[Measures].[Expected Interest Amount], [Measures].[Adjusted
Interest], [Measures].[Difference], ' +
'[Measures].[Zero Interest Transactions],
[Measures].[ClosedBeforeLastInstallment], ' +
'[Measures].[Loan Closed within Report Period]} ON 0, '
set @mdxqry2 = @mdxqry2 +
'{Filter([ProductsAccounts].[Account Id].Members, (' + @SearchCond +
'))} on 2, ' +
@BranchFilter +
'FROM InterestAnalysis'''
set @mdxqry2 = 'SELECT a.* FROM
OpenRowset(''MSOLAP'',''DATASOURCE="SERVERNAME"; Initial
Catalog="DATABASENAME";'',' + @mdxqry + ') as a'
exec(@mdxqry1 + @mdxqry2)
Thanks in Advance
Charu
I have the following SQL select query:
Code:
SELECT
inbound_emails.inbound_email_id,
inbound_emails.campaign_id,
campaign_header.campaign_name,
customers.customer_name,
inbound_emails.date_received,
[Code] ....
Without any indexes (other than PK's) this query would take 1min 21 secs to return all 8500 records.
I wasn't satisfied with that so I added indexes to the tables.
Indexes are;
inbound_emails:
PK: inbound_email_id
1. campaign_id (non-unique, non-clustered)
2. email_from (non-unique, non-clustered)
3. email_to (non-unique, non-clustered)
campaign_header:
PK: campaign_id
1. campaign_name (unique, non-clustered)
customers:
PK: customer_id
1. customer_name (unique, non-clustered)
contracts:
PK: contract_id
1. contract_name (unique, non-clustered)
2. customer_id (non-unique, non-clustered)
Have I made a hash of the indexes? Or is the query statement badly written? What is a reasonable amount of time to expect to retrieve 8500 records?
I think email_from and email_to on inbound_emails is the main culprit, but I don't understand why?
Hi
I have a BULK INSERT task to do, inserting
contents of a file per row.. (not lines total contents of text files)
but it seems 8000 is the max size of a field in SQL 2000 ?
is this the case ?
In SS 2000 it seems that there is no variable data type that can hold more than 8000 characters (varchar) or 4000 unicode characters (nvarchar). I've seen posts where multiple variables are spliced together to extend this limit. I am looking at performing string manipulations in an sproc and I need to be able to deal with the full 2GB/1GB limit of text and ntext field types. Is this possible? How do you deal with that?
View 14 Replies View Related
Hi,
I had a VARCHAR(MAX) parameter declared in my stored procedure and trying to concatenat single column from a table which has~500 rows into a string and keep in this variable, if i am not mistaken, i read that the VARCHAR(MAX) actually can hold up to 2GB of data, so it make me confuse why the variable which i declared as MAX size, can only hold up 8000 characters, any idea?
Regards,
Derek
I am trying to change a text field into a varchar 8000.
I get his error message when trying to convert.
Unable to modify table.
ODBC error: [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot create a row of size 8317 which is greater than the allowable maximum of 8060.
[Microsoft][ODBC SQL Server Driver][SQL Server]The statement has been terminated.
Anyone know of a way to either truncate the text field or
to select only those that are over the 8000 character mark?
Please advise
Thanks
Susan
I was trying to build a string based on one field from one table in Stored Procedure. I know if I declare A VARCHAR variable for the string, it won’t allow to exceed 8000. If does, it will truncate the reminding parts of the fields. What might be the simple solution for that? Even though I know I might need to use several substrings but how?
Thanks!
J827
Declare @sql varchar 8000
Select @sql =@sql + convert(varchar(50),fieldName) from tableA where conditions …
Hi, everyone, I want to know is there a way for me to set varchar to store more than 8000 characters? (I did checked from sql server books online and i know that the maximum storage for varchar, but i just want to know is there any exceptional way for me to store more than that).
Thanks for any reply.
aex
Hi,
I wrote this sql function which takes a comma seperated string of numbers, splits the numbers seperately and stores it in a table. I have specified the input parameter type as text instead of varchar, the size of the string can get more than 8000.
But the function is not working properly if the input size is more than 8000. For example if the input string is of length 8005 and this is the input string from 7995 to 8005 - '123,124,125'. It works fine till 123 and after that it throws an error, Syntax error converting the varchar value '124,125' to a column of data type int. Can anyone tell me what is wrong with this. I am using string functions like charindex, substring. I can post the full function if you want.
Thanks.
hi all, I'm after a way to produce a single-lined output of a char/varchar string replicated over 8000 times.
basically I've been given a task to create a stored procedure which can accept any integer to replicate a string X times.
From what I've read the replicate() fn will covert to varchar of max 8000 bytes.
I've thought about creating a UDF to accept the varchar and int and run a loop to keep outputting but 'print' will pass an endline to the buffer which is no good for my loop.
Any help would be great on this. Thanks.
Is there any possibility to store more then 8000 chars in a column?
View 1 Replies View RelatedI have two string variables each has Varchar(8000)
Declare @VariableA varchar(8000)
Declare @VariableB varchar(8000)
How can I concatenate these two variables without converting them to varchar(max) ?
If try select @VariableA + @VariableB , I only got 7999 characters…
Hello,
We have migrated a sql server 2000 database to sql server 2005, this was done through scripts (table, stored procedures and data).
To access this database we are using an ASP.Net 2.0 application which uses the sqlhelper Aplication Block to connect to the database.
Everything works fine except one Stored Procedure which has an OUT varchar(8000) parameter.
We use the following .Net Code to execute the stored procedure this stored procedure:
aParams[2] = sSerDatos.GetParameter("@DominiosMenu", DbType.String, 8000);
aParams[2].Direction = ParameterDirection.Output;
sSerDatos.ExecuteNonQuery("VM_SDominiosMenu", aParams)
When we invoque the sqlcommand we get this sqlexception:
The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 3 ("@DominiosMenu"): Data type 0xE7 has an invalid data length or metadata length.
If we change the DbType.String Size to 4000 in the .Net code everything works, this same procedure work correctly in SQL Server 2000 with the same .Net code.
Any help would be appreciated.
Thanks,
Sam
I have this sql statement in a stored procedure
SELECT @sql=@sql + '''' + convert(varchar(100), pivot) + ''' = ' + stuff(@sumfunc,charindex( '(', @sumfunc )+1, 0, ' CASE ' + @pivot + ' WHEN ' + @delim + convert(varchar(100), pivot) + @delim + ' THEN ' ) + ', ' FROM ##pivot
in the statement, where @sql is defined as DECLARE @sql varchar(Max). the problem is that this statement produces results that are in excess of 8000 characters and the results are truncated. Is there anyway to avoid this? I know that it's not possible to user ntext/text as a local variable, and if i try to return the result as an ouput paramater, only the first result is returned.
my code is based off of this article http://www.sqlteam.com/article/dynamic-cross-tabs-pivot-tables
Thanks for any suggestions.
Hi
I need to pass the where clause of my statement as an input parameter for a stored procedure. As this is built dynamically within the program (Borland C++), it could sometimes exceed the maximum 8000 bytes of a varchar. I thought of sending in two input paramenters and concatenating them into a memo in the sql, but cannot seem to be able to execute the memo variable (i.e. exec(memo) doesn't work). Is there any other options for passing in such a huge parameter.
Also, I do not think there is any other option than passing in the where clause: passing in seperate parameters and building the clause in sql would require over 300 parameters to be passed, and as the possible number of combination is indefinate, I cannot have a different Stored Procedure for each potential case.
Thank you
Any way to parse out a text value (not varChar, using text data type) that is > than 8000 characters long? I'm looping through 1 big string passed to the DB that is pipe delimited, but I find myself needing the substring function to keep track of which segment I'm acting on (after an update, I then need to take that segment and remove it from the string)...but the subString function won't take anything larger than 8000 chars.
Say I have this string that is text data type...
'aaa|bbb|ccc|ddd|....'
..and so on, surpassing 8000 char length, how could you parse it out using the pipes as the delimter, then do an Update using that segment? Afterward, return to that string and find the next segment, then use it, and so on (in a loop). I tried using an update to set the string = replace(string, segmentJustUsed, '') to "erase" it, but replace can't take text as the datatype. Any help? Hope this isn't to confusing.
Hi all,I have a internet page written in asp to submit into authorscurriculum vitae publications (title, author, year, etc.).If the author submit less than 8000 characters it functions OK, but Ifthe author try's to submit more than 8000 characters the asp page doesnot return an error but the text is not saved in the database or,sometimes, it returned a "Typ mismatch" error.Here is the sp:---------------------------------------------------------------------CREATE PROCEDURE sp_CV_publications(@formCommandnvarchar(255)='process',@id numeric=null,@id_personint=null,@typPubID tinyint= NULL,@publicationstext=null)ASif @formCommand='process'beginINSERT INTO CV_publications(idperson,typPubID,publications)VALUES (@id_person@typPubID,@publications);select 1 as status, @@IDENTITY AS insertedID, * FROMCV_publications WHERE id=@@IDENTITYend----------------------------------------------------------------------------The server is running IIS5 and SqlServer 2000Any ideas ???
View 1 Replies View RelatedBooks Online gives a way to send a message larger than the VARCHAR max of 8000 chars, but the @query argument to xp_sendmail is a simple text string and my data is much more complex, and formatted. Also BOL shows an example using a temporary text file, but it is not clear precisely how you write your insert statements. I tried the following, which writes out all the data and sends it ok except, after each row, there is about a page of blank spaces. What is wrong with my syntax?
SET LANGUAGE British
GO
DECLARE @msgstr VARCHAR(80)
DECLARE @cmd VARCHAR(80)
DECLARE @PMID INT
DECLARE @forename VARCHAR(30)
CREATE TABLE ##texttab (c1 text)
SET @msgstr = 'THE FOLLOWING QUOTES ARE CURRENTLY MARKED AS PENDING:'
INSERT ##texttab SELECT @msgstr
DECLARE C2 CURSOR FOR SELECT ProjMgrID FROM surdba.SVY_QUOTES WHERE StatusID=6
OPEN C2
FETCH NEXT FROM C2 INTO @PMID
WHILE @@FETCH_STATUS = 0
BEGIN
IF @PMID > 1000
SELECT @forename = ISNULL(Forename,' ') FROM surdba.SVY_PERSONNEL_GENERAL WHERE EmployeeID = @PMID
ELSE
SET @forename = ' '
INSERT ##texttab values (RTRIM(@forename))
FETCH NEXT FROM C2 INTO @PMID
END
CLOSE C2
DEALLOCATE C2
INSERT ##texttab values ( ' - This information is autogenerated from the Survey database.')
SET @cmd = 'SELECT c1 FROM ##texttab'
EXEC master.dbo.xp_sendmail @recipients = 'Robin Pearce',
@subject = 'ALL PENDING QUOTES',
@query = @cmd,
@no_header = 'TRUE'
DROP TABLE ##texttab
GO
Would appreciate any help on this one, I do not have time to learn HTML,
thanks
Robin Pearce
I need to handle this conversion in SSIS and not on oracle.
The following expression is executed on a datatype of dt_str with a length of 8000.
SUBSTRING((DT_STR,8000,1252)Column_name,1,8000)
Records longer then 4000 bytes take an error path
The next expression with 4000 bytes works but there is truncation.
SUBSTRING((DT_STR,4000,1252)Column_name,1,4000)
Basically I need to know how to cast a text or ntext into a varchar or nvarchar using ssis but I need to capture the first 8000 byes without truncation.
is this possible?
Using SSIS Reading From oracle I can convert to a text or ntext field but I am having a hard time going directly to a varchar.
What causes SQL Server 2000 to create tables with default column sizes of 8000 for a varchar datatype??
I would assume this can cause significant performance problems.
(see attached)
HI
i want to save data larger than 8000 charactors in a colomn
is there any way to do it in mssql server 2000 desktop addition
plz help me
Thanks in advance
Hi..
I m working on MS SQL Server 2000.
I am trying to pass a list of numbers to a stored procedure to be used with 'IN()' statement.
I was doing something like..
Create Procedure proc
(
@Items varchar(100) --- List of numbers
)
AS Begin
Declare @SQL varchar(8000)
Set @SQL =
'
Select Query......
Where products IN (' + @items + ') '
'
Exec (@SQL)
This stored procedure is working fine, but when i m adding more required stuff to that, the size exceeds 8000, & it gives the error "Invalid operator for data type. Operator equals add, type equals text."
Can any1 please help me out with this ASAP??
Does anyone know of a way to execute sql code from a dynamically builttext field?Before beginning, let me state that I know this db architecture isbuilt solely for frustration and I hope to make it better soon.Unfortunately, there is never a non-crucial time in which we can do anupgrade, so we are stuck for now.Point 1:There are multiple tables: students, courses, cross-referencestudent/courses, teachers, cross-reference teacher/courses, andothers.Point 2:Yearly archiving is done by appending a 2 digit year suffix to thetable and rebuilding the table structure for the current year. Thatis, each of the tables named above has an archive table for 1999,2000, 2001, etc. This leads to many tables and a big mess whenunioning them.Point 3:A history report is run by building a big query that unions each unionof tables (students, courses, etc) by year. This query has grown toobig for a varchar(8000) field. Actually, it's too big for 2 of them.Point 4:I don't want to write code to maintain any more varchar(8000) fieldsfor this query. It should be much more easily handled with atemporary table holding each bit of yearly archive data. I have builtthis and it works fine. I have also figured out how to pull the rowsfrom that table, concatenate them, and insert the resulting lump intoa text field in another table.Point 5:I haven't figured out how to grab the 5 or so records from that tableand execute them on their own. I figured I could grab them, put theminto a text field that's big enough to hold the whole query and thenselect and execute that text field. I've had no luck with that and Ihaven't had any luck finding any references that might help me withthis problem. I keep thinking of nesting execute() calls, but thatdoesn't work.I'm open to questions, potential solutions, hints about different wayto approach the problem, anything.Many thanks in advance,Rick Caborn
View 7 Replies View RelatedProblem about pass a big string (over 8000 characters) to a variable nvarchar(max) in stored procedure in SQL 2005!
I know that SQL 2005 define a new field nvarchar(max) which can stored 2G size string.
I have made a stored procedure Hellocw_ImportBookmark, but when I pass a big string to @Insertcontent , the stored procedure can't be launch! why?
create procedure Hellocw_ImportBookmark @userId varchar(80), @FolderId varchar(80), @Insertcontent nvarchar(max)
as declare @contentsql nvarchar(max); set @contentsql=N'update cw_bookmark set Bookmark.modify(''declare namespace x="http://www.hellocw.com/onlinebookmark"; insert '+ @Insertcontent+' as last into (//x:Folder[@Id="'+@FolderId+'"])[1]'') where userId='''+@userID+''''; exec sp_executesql @contentsql;
Does anyone know why this statement would fail? I have created my own assembly which is on the server and when i run the mdx query call myassembly.mystoredproc() it returns data, but now when I use call myassembly.mystoredproc() it returns an error.
using an mdx query this works fine
call AsmTest.Asm.Analysis.TestClass.NameMe()
When using openquery i get an error
select * from openquery(NV, 'call AsmTest.Asm.Analysis.TestClass.NameMe()' )
OLE DB provider "MSOLAP.3" for linked server "NV" returned message "Prepare is not safe during execution of the NameMe stored procedure.".
Msg 7321, Level 16, State 2, Line 1
An error occurred while preparing the query "call AsmTest.Asm.Analysis.TestClass.NameMe()" for execution against OLE DB provider "MSOLAP.3" for linked server "NV".
linked server definition
USE master
GO
/* Add new linked server */
EXEC sp_addlinkedserver
@server='NV', -- local SQL name given to the linked server
@srvproduct='', -- not used
@provider='MSOLAP.3', -- OLE DB provider (the .2 means the SQL2K version)
@datasrc='nvsifwfp', -- analysis server name (machine name)
@catalog='ARTSDW' -- default catalog/database