Hello,
I have been trying to find out what the maximum memory we can have on SQL7 standard edition server. Have not been able to find it anywhere...
Anuy ideas would be greately appreciated.
TIA
B.
I learned that SQL2000 Standard Edition can only support up to 2GB RAM, we have a WIN2K system on a server with 4CPU, 4GB RAM,
if we run SQL2000 Stanard Edition on it, will the 2 extra 2GB of RAM be wasted ?
Since there is a big diff. between licensing cost of SQL Standard and Enterprise, that's why the user choose Std. edition.
Any opinion or comment...
Hi,
I'm having trouble finding the optimum memory settings for SQL Server 2005. I have 4 instances running on a macine with 8 dual-core processors and 18GB of RAM. I have tried the following memory settings so far:
No maximum - one instance used about 12GB of RAM so then the others struggled
Maximum of 4GB each (2GB left for Windows) - meant that 3 instances could be using 1GB each and then another at 4GB and needing more whilst 9GB sat unused.
Minimum of 2GB each - one instance would use up 10GB and then never give any back to the other instances.
I also find that setting a maximum then just causes a high amount of paging. What I would like to do is have each instance use a minimum amount, say 1GB, and then have each instance use a maximum of 13GB (3GB for other 3 instances running at a minimum level and 2GB for Windows). This 13GB should then be released and allocated to another instance when necessary, assuming it is no longer all being used. I do not want paging to occur if an instance reaches 13GB.
How do I go about configuring SQL Server to behave like this? Is it possible?
Thanks.
Hi
-I have istalled sql server 2005 standard edition , I want to install sql server 2005 enterprise edition on the same machine.
Is it possible? I have Microsoft windows server 2003 SP2 and 1GB RAM.
I want to use partition function with the enterprise edition, will the trial version of sql server work for me?
-If I have already created a database and tables using the standard edition, will I be able to access and use the database using the installed trial version or will I have to start a fresh creating a new database?
- Is it possible to access the same database with any of the installed versions?
BTW, I am prety new to sql server and databases , I am trying to learn by myself
Thanks
Hello!M a newbie.. I just want to know, that wots the difference b/w SQL Server Standard Edition and Express Edition.?And can I use Visual Studio 2005 (Professional Edition) with SQL Server Express Edition.?
View 1 Replies View RelatedDear All,We have a database which contains many tables which have millions ofrecords. When We attach the database with MS SQL Server 2005 StandardEdition Server and run some queries (having joins, filters etc.) thenthey take very long time to execute while when We execute same querieson Enterprise Edition then they run 10 times faster than on standardedition.Our database does not use any features which are present in EnterpriseEdition and not present in Standard Edition. We want to know what arethe differences between Standard Edition and Enterprise Edition forperformance. Why should we go for Enterprise Edition when StandardEdition has all the features required.We are presently using evaluation versions of SQL Server 2005 Standardand Enterprise Editions.Thanks and regards,Nishant Sainihttp://www.simplyjava.com
View 23 Replies View RelatedI am attempting to upgrade a 2005 Standard Edtion to Enterprise Edition. This is a default instance. All components are upgraded successfully except the Database Engine. I receive the following error:
SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]The certificate cannot be dropped because one or more entities are either signed or encrypted using it.. To continue, correct the problem, and then run SQL Server Setup again.
This installation does not have encryption enabled, so I do not undersand the error or how to correct it.
After rebooting the SQL instance appears to be upgraded to Enterprise, but it cannot be upgraded to SP2.
Thanks,
Hi all--I'm researching the cleanest downgrade path from a trial edition of SQL Server 2005 Enterprise to a licensed Standard Edition copy. It looks like downgrading will entail uninstalling the old version and installing the new version, but I'd like to save the original setup as much as possible. Detaching the old databases will preserve the non-system databases; what method would work best for restoring the system databases?
Thanks!
- Jon
The enterprise edition of SQL server includes some advanced BI features, for example the fuzzy lookup feature of IS. If the IS package lives on an enterprise edition of SQL server and the database the package it is targeting lives on a standard edition of SQL server can the advanced features be used? Can you run a fuzzy look against a database on a standard edition of SQL server when th IS package lives on an enterprise edition of SQL server? THANKS!
View 1 Replies View RelatedHi,
I have recently upgraded a SQL x64 server from Developer Edition to Standard Edition, This succeeded without issue. Following a reboot SQL Server yielded the following message
Your SQL Server installation is either corrupt or has been tampered with unable to load SQLBoot.DLL. Please uninstall then re-run setup to correct this issue.
Please can anyone help ?
Many Thanks
Marcus Stuart
I'd like to upgrade from my current SQL Server version: 09.00.3042 (Workgroup edition that comes with SBS upgrade) to the standard edition that I've just purchased. I've attempted to run setup.exe SKUUPGRADE=1 from the command prompt and it just tells me that there's nothing new to install.
I don't really want to uninstall the current installation just to do something that shouldn't be complicated to do, upgrading software versions should not be a difficult process.
Does anybody have any experience with this?
I believe it is possible to restore databases from Enterprise edition to an enviroment with Standard edition. We have been able to do it on databases without any partitioned tables. But if a database has partitioned tables it will not start up in the Standard edition after a successful restore. The error log states that the database will not start because partitions are not allowed in Standard edition (which we knew). But we were led to believe that the databases would restore and open fine, the partitions would just not be there in Standard edition. Are we possibly doing something wrong or will this just not work?
Thanks
Chris
As an ISV, I want to certify my product on Standard Edition. I am using Developer Edition everywhere. Is there a way I can do the certification using the Developer Edition, or do I need to obtain/purchase a copy of the Standard Edition?
View 3 Replies View RelatedI found so many websites wrote that fuzzy grouping ,fuzzy lookup, term extraction, term lookup,Dimension processing destination adapter and Data mining model training destination adapter only available at Enterprise Edition.
Anyway i still can use these components at Standard Edition.
Is that any features different between these two edition for these components? Thanks
Hello all,
Here I need some help or suggestions for the following topic...
I am using SQL server 2000 enterprise edition installed on the machine. Now I wanted to change the edition from enterprise to standard.
There are around 4 user databases exists on the server.
What are the areas I have to take care while doing this? Could I do as normal installation?
No log shipping implemented on the server.
Your suggestions would be very helpful to me.
Thanks in advance.
Does anyone know if there are any issues with restoring Master DB ontoa server running Standard Edition from a server running EnterpriseEdition of SQL Server?
View 1 Replies View RelatedWe have a performance problem with a SQL statement (never completes) on one of our customer€™s sites. They are running SQL Server 2005 Standard Edition with SP2. The server is dual core with 3GB or RAM.
We requested a backup of the database and restored it to a SQL Server 2005 Developer Edition Server with SP2. The server has a single CPU with 2GB or RAM. However the exact same SQL (cut and paste) executes in approx 35 seconds.
We restored the backup of the customers database SQL Server 2005 Standard Edition with SP2. The server is dual core with 2GB or RAM. However as on eth customer site the SQL never completes.
So our question is why is this happening and is there a solution?
Our understanding is that the SQL Server 2005 engine is the same but Developer Edition (aka Enterprise Edition) has additional options.
I tried to download PerformancePoint Server Trial Version to ther server today and I got to the configuration point of the Analysis Services Setting, and when I clicked next to proceed with the configuration I got a popup error message:
"Microsoft Analysis Server must be Evaluation, Developer or Enterprise Edition".
Now I have SQL Server 2005 Developer Edition Disc (Bought it with Visual Studio 2005) but on the server I have SQL Server 2005 Standard Edition, if I try to run the sql server developer Edition disc, I use the wizard download and it seems that the download is going through the SQL Server entire download, it's like I'm re-downloading SQL Server all over again.
Does that seem right?
what is the best approach to work around this probelm?
I appreciate any help
Thanks
I have a report that calculates mean, min, max, stddev of somer exercises for a class (pushups, situps, trunk lifts, etc). I also have to calculate those for the 1-mile run time (ex: data -- 7:56, 6:35, 9:45 ( in minuteseconds). Obviously the standard Avg(), Min(), Max(), StdDev() functions won't work for time. So I put in some custom code to convert the time to seconds so I can use the standard functions on the seconds and also code to convert that answer back to minuteseconds. Max() works, but for example when I try to calculate the min(), it includes nulls from the dataset as zeros (not every student has to do the mile run). So the min is always 0. How can I exclude nulls from being calculated. The min() function excludes nulls so it returns the correct min() on integer data. What else can I do?
View 3 Replies View RelatedI know that SQL2000 can utilize AWE to address more that 2GB of available application addressable RAM, however, I'm not sure how much memory SQL7 can support. BOL hints that SQL7 does take advantage of the /3GB boot.ini switch in W2K and NT4AS. However, no reference so far illuminates the functional enhancements and possible tradeoffs that this change may provide.
Thanks,
Meg
Just two questions actually. We have built a ColdFusion based forums package. Currently we have it on two beta sites, and we are usin sql 7 for the db. Firstly the forums are serving 200-300 people at any given time, about 16,000 unique people a day. SQL & seems to stay at around 50% cpu usage on a dual p3 with 512mb ram. Is that normal? Seems like alot of cpu usage. The other thing is it takes 500mb of ram and just about drains the server of all of its ram even though in the memory properties for the sql server its set to 255mb maximum. Any insight is appreciated.
View 2 Replies View RelatedHello, everyone:
I have SQL Server 2000 Standard Edition running on Windows 2000 Server. There are always memory full alter. I am going to configure that.
I hope a clearation about a concept. In my enviroment, does SQL Server take maximum memroy upto 2GB, no matter if QWE is enabled?
BOL said AWE is available only in the SQL Server 2000 Enterprise and Developer editions. Does it mean AWE cannot be configured on SQL Server 2000 Standard Edition?
Thanks
ZYT
I need to up the Maximum Memory setting.
Out of the box it is set to 2147483647 MB.
I assume this is ~2GB. I have been instructed
to set it to 1GB less than total server memory
which is 16GB. When I change the value
it just changes back.
How do I change it and how are these Megabyte
numbers calculated?
OS: Windows 2003 R2 Enterprise
SQL: SQL Server 2005 Standard
Thanks!
Hi,Is there an Upgrade path from SQl server 2000 Standard edition toEnterprise edition? DO we just have to uninstall and do a reinstall?Any help is appreciated.ThanksGG
View 1 Replies View RelatedI have a SQL Server 2005 Enterprise Edition running in a cluster environment. There is the request to Upgrade to Standard Edition. (Yes, the other way round)
How can I excute an Up-/Downgrade and avoid new installation ?
Thanks for help
Peter
Hi All,
Do I need to remove Microsoft SQL Server 2005 (Standard) from the Add or Remove program to replace it with Developer Edition?
I also wondering if I would need to backup my data and log files first, would they be deleted during the process?
Thanks.
Hi, there,
We are running SQL 2000 & SP4 with our ASP.NET application, now we plan to upgrade to Enterprise Edition due to the huge diffirence in price. Can any one of u give an brief introduction of the difference between these two, and what is the advantages of enterprise edition?
Any suggestion will greately appreciated.
Shermaine
Hi All,
Do I need to remove Microsoft SQL Server 2005 (Standard) from the Add or Remove program to replace it with Developer Edition?
I also wondering if I would need to backup my data and log files first, would they be deleted during the process?
Thanks.
I am trying to find a suitable size for TempDB in RAM .
Is it possible to find the instantaneous maximum usage of the TempDB in RAM?
In other words how can I find the maximum amount of memory used* by TempDB ?
bim@sifas.com.tr
mikiz@turk.net
If I change the Maximum Memory option (sp_configure or vai EM), do I need to restart the MSSQL service?
Clive
I am curious about maximum memory setting .
Should we set maximum memory setting for each SQL server? For example a server has 6 GB memory then should we set maximum memory setting = 3.5 GB ?
A query was taking 20 seconds and consuming 70% CPU takes only 1 second after setting Maximum Memory property to 2048 MB - why?
Server:
OS Microsoft(R) Windows(R) Server 2003, Enterprise Edition
Version5.2.3790 Service Pack 1 Build 3790
8 GB memory
Two Dual-core AMD Opteron 285 2.6GHz Processors
Server is not configured for AWE
Fiber channel connection to EMC Clarion - two LUNs - one for MDF, one for LDF
SQL 2005
SQL 2005 32 bit Standard Edition - SP1 (version 9.0.2047)
Three instances installed on server - only one instance in use
Binaries and system databases on local mirrored disk
Database file (MDF) on one EMC LUN - dedicated physical drives
Log file (LDF) on one EMC LUN - dedicated physical drives
Query in question:
SELECT TOP 10 Address.Address1, Address.Address2, Address.City, Address.County, Address.State, Address.ZIPCode, Address.Country, Client.Name,
Quote.Deleted, Client.PrimaryContact, Client.DBA, Client.Type, Quote.Status, Quote.LOB, Client.ClientID, Quote.QuoteID, Quote.PolicyNumber,
Quote.EffectiveDate, Quote.ExpirationDate, Quote.Description, Quote.Description2, Quote.DateModified, Quote.DateAccessed, Quote.CurrentPremium,
Quote.TransactionDate, Quote.CreationDate, Quote.Producer FROM ((Client INNER JOIN Address ON Client.ClientID = Address.ClientID) INNER JOIN Quote ON
Client.ClientID = Quote.ClientID) WHERE (Quote.Deleted = 0) AND ((Address.AddressType)='Mailing') ORDER BY Client.Name
Address table - 161,075 rows
Client table - 161,634 rows
Quote table - 59,145 rows
With default maximum memory setting (2,147,483,647 MB) - query runs in 20 seconds and consumes over 70 % of the CPU.
After changing maximum memory setting to 2048 MB, query runs in less than 1 second.
Question is:
What is the best practice for setting the minimum and maximum memory settings for SQL 2005?
What can be monitored to identify the cause of these type of issues - using profiler, PerfMon, other tool?
Thanks
How to set maximum server memory by using sql scripts in sql server 2014?
View 5 Replies View Related