Merge Client Failing

Aug 31, 2006

Hi

We have sql2005 merge replication happening - it is using replisapi.dll over the net.

One of the clients has been working fine, until yesterday afternoon - we are running sql2005 sp1 at subscriber and distributer

The message is as follows....


Please help !

Error messages:


The process could not read the request message due to OS error 10054. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147014842)
Get help: http://help/MSSQL_REPL-2147014842

The format of a message during Web synchronization was invalid. Ensure that replication components are properly configured at the Web server. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147199374)
Get help: http://help/MSSQL_REPL-2147199374

The subscription to publication 'yarraman main' could not be verified. Ensure that all Merge Agent command line parameters are specified correctly and that the subscription is correctly configured. If the Publisher no longer has information about this subscription, drop and recreate the subscription. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201019)
Get help: http://help/MSSQL_REPL-2147201019

View 1 Replies


ADVERTISEMENT

SQL Express Failing Due To SQL Native Client

May 11, 2006

I am running Windows XP Media Center Edition and receiving the following error when trying to install the SQL Express Server with Advanced Options:



An installation package for the product Microsoft SQL Native Client cannot be found. Try the installation again using a valid copy of the installation package 'sqlncli.msi'.



I did view the readme and found the following advice:


3.1 Existing SQL Native Client Installation May Cause Setup to Fail
Setup might fail and roll back with the following error message: "An installation package for the product Microsoft SQL Native Client cannot be found. Try the installation again using a valid copy of the installation package 'sqlncli.msi'." To work around this problem, uninstall SQL Native Client by using Add or Remove Programs. On a cluster, uninstall SQL Native Client from all nodes. Then, run SQL Server Setup again.

The problem is that I do not have the SQK Native Client installed to uninstall it.

Any suggestions/ideas?

Thanks in advance.

View 4 Replies View Related

Integrity Job Failing On Merge Replication Database

Jan 2, 2002

Hi everbody,

Integare check job failing on replication(merge) database.Can you tell me how to schedule the this job.
Thanks
Mark

View 1 Replies View Related

Merge Replication Failing After Recreating The Publication

Jun 7, 2006

I am having a problem with merge replication after recreating a publication. It is a simple two-way replication between two servers allowing applications to update data at both ends, i.e. 1 publisher, 1 subscriber for all tables except some junk ones. The problem started after I did the following:

1) I dropped and recreated the publication to allow for some changes to the database schema. These caused problems so I dropped the subscription and publication and restored the databases at each end from backups taken before we started.

2) When I created the publication again, it wouldn't let me use the same name as it thought the publication already existed. It let me use a different name instead.

3) Most things work OK but one of the tables is not replicating inserts from the subscriber to the publisher. There are no errors and no conflicts, other similar tables replicate OK. Inserts go across the other way OK.

4) I am getting replication conflicts on another table that says 'Unable to synchronize the row because the row was updated by a different process outside of replication'

I believe the problem is to do with the original publication details still being in the restored databases, so am looking to drop the publication & subscription, remove the remnants of the old publication, fix the data and recreate pub & sub. What do I need to do to get rid of the old replication data in the database?

Any help much appreciated.



View 4 Replies View Related

SQL Server 2012 :: Merge Statement Using SCD2 Failing?

Mar 18, 2015

I have created mergse statement using SCD2.where I am inserting the data if my BBxkey is not matching with target and updating the rows if the bbxkey is matching and rowchecksum is different.

Working of Store procedure

There are 2 scenario covered in this procedure on the basis of that ETL happening.

There are 2 columns deriving from source table at run time, one is BBxkey which is nothing but a combination of one or more column or part of column and another column is a Rowchecksum column which is nothing but a Hashvalue of all the column of the tables for a row.

Merge case 1:-WHEN NOT MATCH THEN INSERT

If source BBxkey is not there in Archive table that means if BBxKey is null then those records are new and it will directly inserted into Archive table.

Merge case 2:-WHEN MATCH THEN UPDATE

If Source.BBxkey=Target.BBxkey && Source.Rowchecksum<>Target.Rowchecksum then this means source records are available in Archive table but data has been changed, in this case it will update the old record with latestversion 0 and insert the new record with latestversion 1.

my sp failing when source having more than 1 same bbxkey.

error [Execute SQL Task] Error: Executing the query "EXEC dbo.ETL_STAGE_ARCHIVE ?" failed with the following error: "The MERGE statement attempted to UPDATE or DELETE the same row more than once. This happens when a target row matches more than one source row. A MERGE statement cannot UPDATE/DELETE the same row of the target table multiple times. Refine the ON clause to ensure a target row matches at most one source row, or use the GROUP BY clause to group the source rows.".

Sample store procedure

DECLARE @Merge_Out TABLE (Action_Taken varchar(8),
TimeIn datetime,
BBXKey varchar(100),
RowChecksum nvarchar(4000),Col001 varchar(8000),Col002 varchar(8000),
Col003 varchar(8000),Col004 varchar(8000),Col005 varchar(8000),

[code].....

How Can I avoid such failure of my sp.

I want to handle those case where S.bbxkey=T.bbxkey && s.rowchecksum=t.rowchecksum

View 2 Replies View Related

SQL 2005 E-mail Client Failing To Send Email Based On Job Status....

Mar 4, 2008

Kind of a newby sql question, but here goes:I have a sql 2005 database that I have a job that runs Sunday morning at 12:30 am.  I set it up using SQL Svr Mgt Studio 2005. Under  the Management directory I set up Database Mail to work with my local SMTP server. I can send a test email just fine.I then set myself up as an operator with my email address. (Under operators directory) I then went back to the properties of the job I set up, and under 'notification', chose e-mail operator (me) when Job Succeeds. The job runs, itt suceeds, but NO email!It flat out won't work. there are NO entries in teh( email) log for errors either.  Anyone? TIA  Dan  OR is it better to script these jobs using xml? I don't have time to learn a new thing right now, just need it to work!  

View 1 Replies View Related

SQLServer 2005 Service Pack 2 Client Components Is Failing To Install

May 25, 2007

I have Windows XP Professional Version 2002 Service Pack2.

I Have:

Microsoft SQL Server Management Studio 9.00.2047.00
Microsoft Analysis Services Client Tools 2005.090.2047.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 5.0 6.0
Microsoft Internet Explorer 7.0.5730.11
Microsoft .NET Framework 2.0.50727.42
Operating System 5.1.2600





Service Pack is failing to Install CLIENT COMPONENTS; message is:



Product : Client Components
Product Version (Previous): 2047
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQLTools9_Hotfix_KB921896_sqlrun_tools.msp.log
Error Number : 29549
Error Description : MSP Error: 29549 Failed to install and configure assemblies c:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024894
Error message: The system cannot find the file specified.
Error description: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.



This situation, I am guessing, also preventing me to run import/export from the SQLServer Client.



Any help is appreciated. Thanks.

View 6 Replies View Related

Maintenance Plan Failing With Login Failed For User 'sa'. [CLIENT: &&<local Machine&&>]

Nov 28, 2007

Maintenance plan for bakcup is failing with "Login failed for user 'sa'. [CLIENT: <local machine>]"

I went to the Maintenance Plan and opened the Subplan. I clicked the "Manage Connections"

It has three tabs:

Name: Local Server Connection
Server: prod
Authentication: SQL Server Authentication

I clicked the Edit and it shows the Connection Properties:

It says: Enter information to logon to the server. "Use a specific Username and Password" is checked. Username is set as "sa" while the password is empty. I typed in the correct password and pressed Ok. When I go back again, the password still shows empty. I tried to run the plan and it again fails. Do you know why it is not showing the password as blank even if I try to save the password.

View 1 Replies View Related

SQL Server Mobile 2005 Merge Replication Failing Over SSL, But Can Browse Through Pocket IE.

Jan 28, 2008

Hi All, this system is scheduled to go live in near to a day... but i have hit an issue when switching on SSL. Any help would be greatly appreciated.

Device Env:
Windows Mobile 5.0 + Messaging and Security Feature Pack
SQL Server Mobile 2005.

Merge replication works fine without SSL. After running the Configure Web Sync wizzard to setup SSL merge replication no longer works. Note i checked using pocket IE by browsing to https://mycompany.com/pub/sqlcesa30.dll?diag and all worked fine. There was no prompt saying the cert was bad etc.

The certificate is a:
Equifax secure global ebusiness CA-1 cert.
Signature algorithm md5RSA
public key RSA(1024 bits)
thumbprint algorithm sha1

Stacktrace given is:
- ex {"A request to send data to the computer running IIS has failed. For more information, see HRESULT."} System.Data.SqlServerCe.SqlCeException
- Errors {System.Data.SqlServerCe.SqlCeErrorCollection} System.Data.SqlServerCe.SqlCeErrorCollection
Count 1 Integer
Item In order to evaluate an indexed property, the property must be qualified and the arguments must be explicitly supplied by the user. System.Data.SqlServerCe.SqlCeError
HResult -2147012858 Integer
InnerException Nothing System.Exception
Message "A request to send data to the computer running IIS has failed. For more information, see HRESULT." String
NativeError 28037 Integer
Source "Microsoft SQL Server 2005 Mobile Edition" String
StackTrace "at System.Data.SqlServerCe.NativeMethods.CheckHRESULT()
at System.Data.SqlServerCe.SqlCeReplication.Synchronize()
at MyApp.Helper.Replication.SynchronizeInit()
at MyApp.CallSynchronize()
at System.Windows.Forms.Control.OnGotFocus()
at System.Windows.Forms.Control.WnProc()
at System.Windows.Forms.ContainerControl.WnProc()
at System.Windows.Forms.Form.WnProc()
at System.Windows.Forms.Control._InternalWnProc()
at Microsoft.AGL.Forms.EVL.EnterMainLoop()
at System.Windows.Forms.Application.Run()
at MyApp.Program.Main()

View 2 Replies View Related

SQL SERVER 2005 REPLICATION (MERGE AGENT FAILING : PUSH SUBSCRIPTION)

Mar 27, 2006

ERROR MESSAGE:

"Message: Incorrect syntax near 'NoteID'."

Here is a snipet from the output file:

2006-03-27 13:01:49.820 Skipping file 'NotesHistory_21.sch' because it has already been delivered for a previous article or by a previously interrupted snapshot.
2006-03-27 13:01:49.867 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET ANSI_NULLS ON

2006-03-27 13:01:49.898 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:49.945 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET QUOTED_IDENTIFIER ON

2006-03-27 13:01:50.008 [17%] OLE DB Subscriber 'LUZERNV4-PDOSQL4': CREATE TABLE [dbo].[MSmerge_conflict_EFILE_MERGE_NotesHistory](
[NoteID] [int] NOT NULL,
[CaseRefNum] [int] NOT NULL,
[KeyField] [varchar](500) NOT NULL,
[KeyValue] [varchar](500) NOT NULL,
[Note] [varchar](800) NULL,
[NoteField] [varchar](100) NULL,
[ScanDocID] [int] NULL,
[PDF_ID] [int] NULL,
[RescanCode] [int] NULL,
[RescanNote] [varchar](100) NULL,
[AuditID] [bigint] NOT NULL,
[rowguid] [uniqueidentifier] ROWGUIDCOL NOT NULL
)


ꜽśã¹? êœ?Å›B 27 13:01î–”Å›è›ªç —êœ?Å›é”?Ä€Percent Complete: 17
2006-03-27 13:01:50.086 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET ANSI_NULLS ON


2006-03-27 13:01:50.117 Preparing table 'NotesHistory' for merge replication
2006-03-27 13:01:50.164 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET QUOTED_IDENTIFIER ON


2006-03-27 13:01:50.195 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.258 OLE DB Subscriber 'LUZERNV4-PDOSQL4': if object_id('MSmerge_conflicts_info') is not NULL
alter table [MSmerge_conflict_EFILE_MERGE_NotesHistory] add origin_datasource_id uniqueidentifier NULL

2006-03-27 13:01:50.351 OLE DB Subscriber 'LUZERNV4-PDOSQL4': if object_id('MSmerge_conflicts_info') is not NULL
create nonclustered index [ncMSmerge_conflict_EFILE_MERGE_NotesHistory] on [MSmerge_conflict_EFILE_MERGE_NotesHistory] ([rowguid], origin_datasource_id)

2006-03-27 13:01:50.383 OLE DB Subscriber 'LUZERNV4-PDOSQL4': exec sp_MSsetconflicttable @article = N'NotesHistory', @conflict_table = N'MSmerge_conflict_EFILE_MERGE_NotesHistory'

2006-03-27 13:01:50.430 OLE DB Subscriber 'LUZERNV4-PDOSQL4': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.476 [17%] The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.Percent Complete: 17
2006-03-27 13:01:50.50é”?Ä€
2006-03-27 13:01:50.539 Applied script 'NotesHistory_21.cft'
2006-03-27 13:01:50.586 OLE DB Subscriber 'LUZERNV4-PDOSQL4': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.617 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.711 Percent Complete: 17
2006-03-27 13:01:50.742 {call sp_MSsetconflicttable (N'NotesHistory', N'MSmerge_conflict_EFILE_MERGE_NotesHistory', N'LARGOS00-SDI', N'EFILE', N'EFILE_MERGE')}
2006-03-27 13:01:50.773 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.867 Percent Complete: 0
2006-03-27 13:01:50.898 Category:COMMAND
Source: Failed Command
Number: 0
Message: {call sp_MSsetconflicttable (N'NotesHistory', N'MSmerge_conflict_EFILE_MERGE_NotesHistory', N'LARGOS00-SDI', N'EFILE', N'EFILE_MERGE')}
2006-03-27 13:01:50.961 Percent Complete: 0
2006-03-27 13:01:50.992 Category:SQLSERVER
Source: LUZERNV4-PDOSQL4
Number: 102
Message: Incorrect syntax near 'NoteID'.
2006-03-27 13:01:51.039 Percent Complete: 0
2006-03-27 13:01:51.070 Category:NULL
Source: Merge Replication Provider
Number: -2147201001
Message: The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
2006-03-27 13:01:51.133 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.180 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.226 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.258 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.305 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.336 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.383 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.414 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.445 Disconnecting from OLE DB Distributor 'LARGOS00-SDI'
2006-03-27 13:01:51.492 Disconnecting from OLE DB Distributor 'LARGOS00-SDI'
2006-03-27 13:01:51.523 The merge process will restart after waiting 60 second(s)...

View 1 Replies View Related

Data Flow Job Failing, Destination = Microsoft SQL Native Client, Error Message Not Too Helpful...

Dec 14, 2007

Hi there,

I have a Data Flow task which uses an XML File Source with six parellell Outputs, each going firstly to a Data Conversion Task, then the results of each end in a SQL Server Destination Object. (All using the SQL Native Client)

To eplain this further, the Xml file contains 6 different types of elements, the Dataflow splits out each type of element and processes them into different tables. The Data Transformation object exists only because the XML fields are Uni-code and the table fields are VarChar not nVarChar.


Initially using this setup I found that the Connection would timeout using the SQL Native Client so I changed the Timout on the Destination Objects to 0. This fixed the problem to some degree, however at present I can run the Pakage using the Visual Studio enviroment and everything works fine, no problem. When I run the Dtsx file using the SQL Server Agent, I end up getting the error below...



Error: 2007-12-14 14:33:19.16 Code: 0xC0202009 Source: Import XML File to SQL SQL - CP [2746] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from

I understand that this error is somewhat of a 'catch all' and that the way the Native SQL Server Connection object works makes Error Capturing difficult. I have tried a few things which I will list as I'm sure they will be suggested...


I have played around with the 'MaxInsertCommitSize' property of the SQL Server Destination Objects to no avail (IE, changing to 50000, 10000, 1000 all of which resulted in the same problem)

I am running the ssis pakage from the server which is the destination

As mentioned above the Timeout on the SQL Server Destination Objects is set to 0

What I have already mentioned and still don'tt quite understand is that I can run the job successfully from the Visual Studio enviroment but as a job run off the SQL Server it fails...



Can

View 8 Replies View Related

Merge Replication Failing With Named Pipes Provider, Error: 40 - Could Not Open A Connection To SQL Server

Sep 28, 2007



Hi,

I have merge replication configured over VPN and the replication is failing to connect to the subscriber through Named pipes with the error Named Pipes Provider, error: 40 - Could not open a connection to SQL Server ......

Actually , I am having issues with Named pipes connection from publisher to subcriber. I have enabled the protocols and also enabled the remote connections using both tcp/ip and named pipes. I have created the client network alias using named pipes

Also, due to security reasons only few ports have been released on the subscriber. Please provide me some information on the following.
1) Does any port specifically be released for listening on named pipes? i am able to connect using tcpip with out any issues as 1433 has been released.
2) How to configure the replciation to use tcpip and not named pipes (guess by default it will use named pipes)?




View 1 Replies View Related

HTTPS Merge Client Synchronisation Issues

May 1, 2007

Hi


We have about 70 clients, each with their own databases synching to a copy of their database on a remote webserver. They synchronise using a Windows Service which we wrote using RMO.



For completeness, our setup is as follows:

subscription.CreateSyncAgentByDefault = False -- I wrote a windows service to synchronise
subscription.UseWebSynchronization = True
subscription.InternetSecurityMode = AuthenticationMethod.BasicAuthentication
subscription.SubscriberType = MergeSubscriberType.Anonymous



Sometimes, one of our clients synchronisation goes up the spout - it might take hours to synchronise - despite their internet connection being fine. And once this starts to happen, nothing will fix it. We've restarted their server, rebooted their router etc etc.



Well, the only way of fixing it is to recreate the publication, copy the backup, reinitialise and start again, which costs us a days work and inconveniences the client greatly.


What would be the likely trigger for this. How can we stop this happening again.


If it helps we could create a trace to help resolve this.....



Regards

Bruce

View 1 Replies View Related

Optimising Merge Replication For Both Server And Client Subscribers

Jan 4, 2007


I need to merge replicate data to two different types of subscribers:

Clients subscribers which will have a very small percentage of the data from the central database. The data on these machines will be managed using dynamic filtering on host_name()
Server subscribers which will manage a copy of all the data from the central database
There will be far fewer server subscribers than client subscribers.

As I see it I have two options for the configuration
1) Use two separate merge publications €“ one which is filtered and one which isn€™t
2) Use a single merge publication and setup the filtering so that the server subscribers receive all the rows

Which option is likely to lead to better performance?

With option 1) there would be 2 complete sets of replication metadata which need to be maintained €“ so I am tending towards option 2. Are there any disadvantages in using a dynamic filter to return a very large number of rows?

View 6 Replies View Related

'Left Outer Merge Join' Failing To Join Valid Row

Aug 10, 2007

Scenario:

OLEDB source 1
SELECT ...
,[MANUAL DCD ID] <-- this column set to sort order = 1
...
FROM [dbo].[XLSDCI] ORDER BY [MANUAL DCD ID] ASC


OLEDB source 2
SELECT ...
,[Bo Tkt Num] <-- this column set to sort order = 1
...
FROM ....[dbo].[FFFenics] ORDER BY [Bo Tkt Num] ASC

These two tasks are followed immediately by a MERGE JOIN

All columns in source1 are ticked, all column in source2 are ticked, join key is shown above.
join type is left outer join (source 1 -> source 2)

result of source1 (..dcd column)
...
4-400-8000119
4-400-8000120
4-400-8000121
4-400-8000122 <--row not joining
4-400-8000123
4-400-8000124
...


result of source2 (..tkt num column)
...
4-400-1000118
4-400-1000119
4-400-1000120
4-400-1000121
4-400-1000122 <--row not joining
4-400-1000123
4-400-1000124
4-400-1000125
...

All other rows are joining as expected.
Why is it failing for this one row?

View 1 Replies View Related

Client With Tcp/ip Produce &#34;time Out Error&#34; While Same Client While Switced To Named Pipes

May 28, 2001

We have 15 clients running our applicaton
14 of then conected to SQL server using TCP/IP and it runs fine

1 of 15 when connected using TCP/IP produce "..Time out error "
but runs fine when swiched from TCP/IP to Named pipes

1.What area should we look to correct problem with Time out using TCP/IP ?
2. Where to get information about using TCP/IP via Named pipes ?

View 1 Replies View Related

Install SQL Server2005 Error:[Native Client]Encryption Not Supported On The Client

May 10, 2006

Product: Microsoft SQL Server 2005 -- Error 29515. SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][SQL Native Client]Encryption not supported on the client. Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.

View 78 Replies View Related

Client Unable To Establish Connection Encryption Not Supported On SQL Server. (Microsoft SQL Native Client)

May 2, 2006

On Windows XP systems I get the following issue when trying to browse the MSDB folder in SSIS

Client unable to establish connection
Encryption not supported on SQL Server. (Microsoft SQL Native Client)

I have noticed another post where several others have noticed the same issue. It appears to only occur on Windows XP installations. Is there a workaround or fix for this?

View 2 Replies View Related

Setup Error : [SQL Native Client] Encryption Not Supported On The Client

Nov 1, 2006

Hi,

I have SQL2000 installed as the default instance, and now I'm trying to install SQL 2005 standard edition as a named instance.

I receive this error :
SQL Server could not connect to database service for server configuration.. [SQL Native client] Encryption not supported on the client. However I'm able to install client tools

The setup works fine on other box with the same config : SQL 2000/Windows XP, is there any work around for this issue ?

In my SQL 2000 client network utilty "Force proctocol encryption " is desabled and did not find the setting for SQL 2005 !

Thank you

View 1 Replies View Related

Upgrade Client Connectiviity Tools On Client Machines

Jul 23, 2005

Hello,Is it necessary to upgrade the Client Connectivity Tools on all clientmachines after the SQL Server database server is upgraded from Version7.0 to 2000?Thank you in advance!Eddy

View 1 Replies View Related

Merge Repliction - Run Stored Procedure When Merge Agent Starts

Jul 23, 2005

I have database on SQL Server 2000 set up with a merge publication.This publication is configured with a number of dynamic filters toreduce the amount of data sent to each client. Each client has ananonymous pull subscription. The merge process can be triggered by thewindows sync manager and my application.To improve performance I have created some helper tables to hold themapping between user login and primary keys of selected entities.For the replicated data to be correct the contents of the helper tablesneeds to be up to date.I need to fire off a stored procedure on the publisher beforereplication starts to verify that this data is up to date. I can notsee any documented way of doing this however I have been experimentingwith some unorthodox systems.Firstly has anyone any ideas?I have been considering adding a trigger to some of the tables used bythe Microsoft replication code - yes I know this is very nasty.My problems arise because executing this stored procedure will causesome data to be updated. In updating data we could create a newgeneration in the database. I must therefore run my stored procedurebefore any the Microsoft code makes any generation checks / updates.Anyone done anything similar, Anyone have any better ideas?Any comments would be gratefully received.

View 1 Replies View Related

Sql Native Client Or Sqlserver Client

Mar 3, 2007

Hi,

While using Sql Native Client ,VB Application giving error

"Transcation Cannot Start because more than one ODBC connection is in use"

But when useing SqlServer client then work perfectly ok.

Please guide where to use Sql Native Client.

Thanks

Rizwan



View 1 Replies View Related

SQL NATIVE CLIENT - OLE DB Connection On 64 Bit Client

Apr 23, 2008

I have tried this on several different operating systems (VISTA and XP ) and several versions of SQL NATIVE CLIENT including 2005.90.3042.0

I have a 64 bit "SQL NATIVE CLIENT" connection that fails. The exact same connection and code succeeds on 32 bit.
My customer and I prepend "oledb:" to the connection string and it starts working.

FAILS on 64 bit:
Provider=SQLNCLI.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=Wrigley_Test;Data Source=MONGO;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=RIPTIDE;Use Encryption for Data=False;Tag with column collation when possible=False;MARS Connection=False;DataTypeCompatibility=0;Trust Server Certificate=False

WORKS
oledb:Provider=SQLNCLI.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=Wrigley_Test;Data Source=MONGO;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=RIPTIDE;Use Encryption for Data=False;Tag with column collation when possible=False;MARS Connection=False;DataTypeCompatibility=0;Trust Server Certificate=False

I debugged my code to the point that I know it is happening when I call CreateAccessor for my SQL statement.


m_hr=m_pIAccessor->CreateAccessor(DBACCESSOR_ROWDATA, GetCols(), (m_pDBBinds+IsBookmarked()), 0, &m_hAccessor, NULL);

Error:

Microsoft SQL Native Client: Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.

Does anyone have any suggestions?

View 6 Replies View Related

Change A Merge Subscriber To Become A Merge Publisher

Aug 16, 2004

Hi,

I'm using merge replication to maintain a backup copy of my main (publisher)MSDE database. A push subscription periodically (1 per minute) updates the backup DB.
It's intended that if the main db goes down then the backup (subscription) db can be configured as a publisher. This must all be performed via scripting.
The initial configuration of the main publisher and subscription is controlled via scripting, which works fine.
The problems occur when I try to configure the subsciber to become a publisher. A script is executed on the subscriber but fails at the point when it's configuring the publisher detail. The error is something like "unable to configure a publication for a database setup as an anonymous subscription".
I'm guessing that there are subscritpion artifacts added to the database which need to be removed before it can be configured as a new publisher.

Please help,
Jez W

View 1 Replies View Related

Bcp Failing

Jan 4, 2001

i ran it from the command prompt. I used my nt account which belongs to the domain admin nt group. my account does have sql access as sa.

also on one of the servers all jobs are failing with the following message - Unable to Connect to Sql Server (local). The nt log records the error that the specific user sqlexec (this is the account on which sql executive runs) is not defined as a valid user of a trusted sql server connection. I am not able to change the security setting on this server using EM nor am i able to use the sql security manager. I get an access denied error. What is the workaround for this problem? Will stopping and restarting the sql service help?
------------

How did you run bcp? In dos prompt or as sql job? Which nt account did you run bcp under? Did you grant sql access for that nt account?


------------
aruna at 1/3/01 4:39:49 PM

Subject:
From:
Date: bcp failing (reply)
Ray Miao ()
1/3/01 4:15:33 PM

yes i did. it still gives me the same error - 18452 error not associated with a trusted connection
-----------------

Did you enable mixed login mode on the server?

------------
aruna at 1/3/01 2:55:59 PM


hello ray

It still does not work. I granted SA rights for the nt group via sql security manager. For one of the servers i get the following error message -
This sql server does not support Windows NT SQL Server Security stored procedures.


--------------
From:
Date: bcp over trusted connections failing (reply)
Ray Miao ()
1/3/01 12:51:50 PM

Use security manager to grant access for nt account.


------------
aruna at 1/3/01 11:59:49 AM

i am attempting to bcp using the -T (trusted connection) option in sql 6.5. the login security mode is set to integrated. the bcp is however failing with msg 18452 error not associated with a trusted connection. why is this happening? i do not want to hardcode the sa password in the bcp command.

thanks

View 1 Replies View Related

Help With Failing Job

May 10, 2006

I have an excutable on the c drive and I have created a job to run that excutable

In the Job
C:Folderjob.exe BA

The job was running until we had a power outage. Now I can get it to run with a scheduled job, the only way I can get it to run is typing it on the command line. I have tried droping and recreating this job but nothing works.

The error is: The stip did not generate any out put.

Do I need to troubleshoot the excutable which is a whole other beast.

Any help would be great.

Thanks

View 4 Replies View Related

SQL Job Failing

Apr 19, 2004

We have a sqljob keep failing if we set the ownership of the job other than 'sa'. Any idea why this fails?

View 6 Replies View Related

Job Failing

Aug 22, 2005

Hi,

View 6 Replies View Related

Job Failing

Apr 9, 2007

I have a scheduled job on a SQL 2000 database which is failing. Here is the error message :



The job failed. Unable to determine if the owner (cacisnasir) of job Integrity Checks Job for DB Maintenance Plan 'IDS' has server access (reason: Could not obtain information about Windows NT group/user 'cacisnasir'. [SQLSTATE 42000] (Error 8198)).



I am the SA on the instance. I wonder why would I be getting this error message? I am able to logon to this instance and browse and change things. So clearly it recognizes me. But when I run the job it fails. Wonder why? my SQL Server version is 8.0.

View 6 Replies View Related

[C#] Failing To Use SCOPY_IDENTITY()

Dec 20, 2004

Dear Reader,

Currently I am building an application for a theme park where I work as a trainee for school, one project for me is to rebuild all the hundreds of databases into a few sql driven application's. Now I got a problem whit the use of SCOPE_IDENTITY(). Because the data has to be correct before inserting it into the database I use the transact features of .NET and I create 1 SQL string wich I dump in that method. The problem is that I can't be able to use the value of SCOPE_IDENTITY() for some reason, maybe you guys see a mistake in the actual (dynamic) query:
Here is the query built up by my program to write the data (of a single form) into the database:

DECLARE @OID int;
INSERT INTO Medisch (med_za_ID, med_WeekNr, med_Enen, med_Bijzonderheden, med_AfwijkendGedrag, med_SexGedrag, med_GemAdemhaling, med_GemHoesten, med_Temperatuur, med_Conditie, med_BloedGeprikt, med_Cupje, med_BasisVis, med_Eetlust, med_GemGewicht)VALUES(3,1123,,'','','',,,,'','False','False',45,'',);
SELECT @OID = SCOPE_IDENTITY();
INSERT INTO Medisch_Medicijnen_Details (mmd_mmt_ID, mmd_med_ID, mmd_Hoeveelheid, mmd_Aantal) VALUES(@OID, 2,23, 23 );

Everything else works unless the SCOPE_IDENTITY() things.
I hope someone can help me out fixing this mistake.
Tnx in advanced,

Grz.
Stefan

View 10 Replies View Related

DTS Failing(very Urgent)

Feb 13, 2002

Sql Guru's,

I have some DTS packages some times failing.one day sucess and next day it's failing. The following error showing.
DTSRun: Executing... DTSRun OnStart: DTSStep_DTSExecuteSQLTask_3 DTSRun OnError: DTSStep_DTSExecuteSQLTask_3, Error = -2147217900 (80040E14) Error string: OLE DB provider 'SQLOLEDB' reported an error. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147217900 (80040E14); Provider Error: 7399 (1CE7) Error string: OLE DB provider 'SQLOLEDB' reported an error. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error: -2147217900 (80040E14); Provider Error: 7312 (1C90) Error string: [OLE/DB provider returned message: Timeout expired] Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_3 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRu... Process Exit Code 1. The step failed.

Any body help me. This is very urgent

View 2 Replies View Related

Login Failing....

Apr 24, 2001

this is the message that i'm getting and i dont know what to do so that i can access my SQL databases thru cold fusion:

ODBC Error Code = 37000(Syntax error or access violation)

[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.

i didnt have any problems with this database until i moved it over to another SQL server and tried the cold fusion front end to it. i dont know what to do now.

View 1 Replies View Related

Who Is Failing SA Login

Feb 16, 2001

I have inherited the task of setting some standards for SQL Server setup and usage in my company. Use of SA with and without a password was rampant. As I get DTS jos and VB code changed to use another account I have been securing the SA account with a password that no one uses. I now get a multitude of failed logins for the SA account on multiple systems by people trying to logon as SA, not jobs. Is there any way to generate an error message that will pass the host PC or server, or network ID of the user trying to login with the SA account?

Thanks in advance.
Bill

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved