I Have 3 columns in source (ID1,ID2,ID3) ..i want make a lookup of 'Dnumber' column in the target table with each of the 3 columns.Has to map the unmatched ones(ID's) in the 'Dnumber'
Iam fine till getting the unmatched ID's from each of the column from source ..but getting problem in mapping these 3 columns in to 'Dnumber'
Ex: Lets say got the unmatched are like this ,
ID1 ID2 ID3 1 4 6 2 5 7 3 8
Output should be :
Dnumber 1 2 3 4 5 6 7 8
I Can't use UnionAll..bcoz 3 columns should map to the same target column.Not sure about Merge Join
Hi, Is this anyway to finding updated/ deleted recored using anyother data flow transformation tasks without using sql task. Can find the new records using merge join task.
Is there better way to merge master table using staging table?
I have two tables each with a date field. I have to combine these two tables and sort on the date. I want the date from each table to be on the same column though, not in seperate columns.
I need to populate a table from several sources of raw data. For agiven security (stock) it is possible to only receive PARTS ofinformation from each of the different sources. It is also possibleto have conflicting data.I am looking to make a composite picture of a given security using thefollowing rules:1) The goal is to replace all NULL and Blank values with data2) Order of precedence (from highest to lowest) is Non-NULL Non-Blank--> Blank --> NULL3) In the case of Non-NULL Non-Blank values that conflict (aredifferent) leave existing value (even if NULL or Blank)For example:Given the following rows:Symbol Identity IdSource Exchange Type SubType Name-------- ------------ --------- --------- ------- ---------------------------TZA 901145102 CUSIP XNYS Stock NULL TV AZTECATZA 901145102 NULL NULL NULL NULLWSM 969904101 CUSIP XNYS Stock NULL WILLIAMSSONOMAWSM 969904101 NULL XNYS Stock NULLWILLIAMS-SONOMAWSM CUSIP XNYS Stock Common NULLWSM NULL CUSIP XASE Stock NULL WILLIAMSSONOMATYC 902124106 CUSIP XNYS Stock NULL TYCOTYC 902124106 CUSIP XNYS Stock NULL TYCOINTERNATIONALI am looking for the following results ('*' indicates changed value)Symbol Identity IdSource Exchange Type SubType Name-------- ------------ --------- --------- ------- ---------------------------TZA 901145102 CUSIP XNYS Stock NULL TV AZTECATZA 901145102 *CUSIP *XNYS *Stock NULL *TV AZTECAWSM 969904101 CUSIP XNYS Stock *Common WILLIAMSSONOMAWSM 969904101 *CUSIP XNYS Stock *CommonWILLIAMS-SONOMAWSM *969904101 CUSIP NULL Stock Common NULLWSM *969904101 CUSIP XASE Stock *Common WILLIAMSSONOMATYC 902124106 CUSIP XNYS Stock NULL TYCOTYC 902124106 CUSIP XNYS Stock NULL TYCOINTERNATIONAL
Hi I have a problem out here. I have two databases with the same table structure and I want to merge data from both the tables . Please can anyone let me know. Iam using Sql Server 7.0.
So I have been trying to get mySQL query to work for a large database that I have. I have (lets say) two tables Table_One and Table_Two. Table_One has three columns: Type, Animal and TestID and Table_Two has 2 columns Test_Name and Test_ID. Example with values is below:
In Table_One all types come under one column and the values of all Types (Mammal, Fish, Bird, Reptile) come under another column (Animals). Table_One and Two can be linked by Test_ID
I am trying to create a table such as shown below:
This should be my final table. The approach I am currently using is to make multiple instances of Table_One and using joins to form this final table. So the column Bird, Reptile, Mammal and Fish all come from a different copy of Table_one.
For e.g
Select Test_Name AS 'Test_Name', Table_Bird.Animal AS 'Birds', Table_Mammal.Animal AS 'Mammal', Table_Reptile.Animal AS 'Reptile, Table_Fish.Animal AS 'Fish' From Table_One
[Code] .....
The problem with this query is it only works when all entries for Birds, Mammals, Reptiles and Fish have some value. If one field is empty as for Test_Two or Test_Three, it doesn't return that record. I used Or instead of And in the WHERE clause but that didn't work as well.
I don't know the correct syntax to accomplish this. I've looked in the on-line help but am not coming up with anything.
Basically I have two identically structured tables in two separate databases.
I wanted to select anything from the dbo2.table that isn't in the dbo1.table and insert it into dbo1.table.
I thought I could do something like... quote:
Select INTO dbo1.table
and then add my select statement. But that throws an error: quote:Server: Msg 2714, Level 16, State 6, Line 1 There is already an object named 'bkupproceduresfeeschedule' in the database.
And the on-line documentation says an INTO is only for a new table.
How can I merge records from one table into another table?
I'm trying to avoid a large amount of manual data manipulation.
Here's the background: Legacy system that has (well let's call apples apples) pretty much no method of enforcing data integrity, which has caused a fairly decent amount of garbage data to be inserted in some tables. Pulling one of the [Individuals] table from within this Legacy system and inserting it into a production system, into the Table schema currently in place to track [Individuals] in this Production system.
Problem: Inserting the information is easy, how to deduplicate the records that exist within the staging table that the legacy [Individuals] table has been dumped into in production, prior to insertion. (Wanting to do this programmatically with SQL or SSIS preferably, so that I can alter it later to allow for updating existing/inserting new)
Staging Table Schema:
; CREATE TABLE [dbo].[stage_Individuals]( [SysID] [int] NULL, --Unique, though it's not an index intended to identify the [Individuals] [JJISID] [nvarchar](10) NULL, [NameLast] [nvarchar](30) NULL, [NameFirst] [nvarchar](30) NULL, [NameMiddle] [nvarchar](30) NULL,
[code]....
Scenario: There are records that duplicate the JJISID, though this value is supposed to be unique for every individual. The SYSID is just a Clustered Index (I'm assuming) within the Legacy system and will be most likely dropped when inserted into the Production [Inviduals] table. There are records that are missing their JJISID, though this isn't supposed to happen either, but have valid information within SSN/DOB/Name/etc that can be merged into the correct record that has a JJISID assigned. There is really no data conformity, some records have NULLS for everything except JJISID, or some records will have all the [Individuals] information excluding the JJISID.
Currently I am running the following SQL just to get a list of the records that have a duplicate JJISID (I have other's that partition by Name/DOB/etc and will adapt whatever I come up with to be used for those as well):
; select j.* from (select ROW_NUMBER() OVER (PARTITION BY JJISID ORDER BY JJISID) as RowNum, stage_Individuals.*, COUNT(*) OVER (partition by jjisid) as cnt from stage_Individuals) as j where cnt > 1 and j.JJISID is not nullNow, with SQL Server 2012 or later I could use LAG and LEAD w/ the RowNum value to do my data manipulation...but that won't work because we are on SQL Server 2008 in this environment.
[URL]
With, the following as a potential solution:
GSquared (3/16/2010)Here's a query that seems to do what you need. Try it, let me know if it works.
Performance on it will be a problem, but I can't fine tune that. You'll need to look at various method for getting this kind of data from the table and work out which variation will be best for your data. Without access to the actual table, I can't do that.
; WITH CTE AS (SELECT master_id, MIN(ID) AS first_id, MAX(Account_Expiry) AS latest_expiry FROM #People GROUP BY master_id) SELECT P1.master_id,
[code].....
Unfortunately, I don't think that will accomplish what I'm looking for - I have some records that are duplicated 6 times, and I'm wanting to keep the values within these that aren't NULL.
Basically what I'm looking for, is to update any column with a NULL value to the corresponding Duplicate [Individuals] record value for that column.
**EDIT - Example, Record 1 has a JJISID with NULL NameFirst & NameLast BUT Record 2 has the same JJISID and values for NameFirst & NameLast. I'm wanting to propogate the NameFirst & NameLast from Record2 into Record1
Please note that the number columns are different in each table. I wanted to dump the data of Source table to Destination table. I meant to say that the rows of 2 columns in Source table to last 2 rows of Destination table. And also my oreder of the columns in Destination table will vary. So i need to a way to dynamically insert the data in bulk. but i will know the column names for sure before inserting.
Is there anyway to bulk insert into these columns.
I have a business need to create a report by query data from a MS SQL 2008 database and display the result to the users on a web page. The report initially has 6 columns of data and 2 out of 6 have JSON data so the users request to have those 2 JSON columns parse into 15 additional columns (first JSON column has 8 key/value pairs and the second JSON column has 7 key/value pairs). Here what I have done so far:
I found a table value function (fnSplitJson2) from this link [URL]. Using this function I can parse a column of JSON data into a table. So when I use the function above against the first column (with JSON data) in my query (with CROSS APPLY) I got the right data back the but I got 8 additional rows of each of the row in my table. The reason for this side effect is because the function returned a table of 8 row (8 key/value pairs) for each json string data that it parsed.
1. First question: How do I modify my current query (see below) so that for each row in my table i got back one row with 19 columns.
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.* FROM PRODUCT A CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B
If updated my query (see below) and call the function twice within the CROSS APPLY clause I got this error: "The multi-part identifier "A.ITEM6" could be be bound.
2. My second question: How to i get around this error?
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*, C.* FROM PRODUCT A CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B, fnSplitJson2(A.ITEM6,NULL) C
I am using Microsoft SQL Server 2008 R2 version. Windows 7 desktop.
Here is My requirement, I'm not sure if this is possible. Creating table called master like col1, col2 col3, col4 , col5 ...Where Col1, col2 are updatable - this can be done easily
Col3, col4 are columns in another table but these can be just a read only ?? Is this possible ? this is possible with View but not friendly with share point CRUD...Col 5 is a computed column of col 2 and col5 ? if above step can be done then sure this can be done I guess.
Hello,Using SQL Server 2000, I'm trying to put together a query that willtell me the following information about a view:The View NameThe names of the View's columnsThe names of the source tables used in the viewThe names of the columns that are used from the source tablesBorrowing code from the VIEW_COLUMN_USAGE view, I've got the codebelow, which gives me the View Name, Source Table Name, and SourceColumn Name. And I can easily enough get the View columns from thesyscolumns table. The problem is that I haven't figured out how tolink a source column name to a view column name. Any help would beappreciated.Garyselectv_obj.name as ViewName,t_obj.name as SourceTable,t_col.name as SourceColumnfromsysobjects t_obj,sysobjects v_obj,sysdepends dep,syscolumns t_colwherev_obj.xtype = 'V'and dep.id = v_obj.idand dep.depid = t_obj.idand t_obj.id = t_col.idand dep.depnumber = t_col.colidorder byv_obj.name,t_obj.name,t_col.name
I'm in the process of converting legacy DTS packages to SSIS. I need to populate a table that has more fields than the source file. In DTS I did this with an ActiveX script. How do I go about doing this within SSIS.
In the ActiveX script most of the fields were defaulted with either spaces or zeroes.
One of the Destination fields needs to be incremented by 1 for each new record inserted.
I just created a new table with over 100 Columns and I need to populated just the first 2 columns.
The first columns to populate is an identify column that is the primary key. The second column is a foreign_key to an other column and I am trying to populate this columns with all the values from the foreign_key value. This is what I am trying to do.
column1 = ID column2= P_CLIENT_D
SET IDENTITY_INSERT PIM1 ON
INSERT INTO PIM1 (P_CLIENT_ID) SELECT Client.ID FROMP_Client
So I am trying to insert both an identity values and a value from an other table while leaving the other columns blank. How do I go about doing this.
Hello,I have a query that I need help with.there are two tables...Product- ProductId- Property1- Property2- Property3PropertyType- PropertyTypeId- PropertyTypeThere many columns in (Product) that reverence 1 lookup table (PropertyType)In the table Product, the columns Property1, Property2, Property3 all contain a numerical value that references PropertyType.PropertyTypeIdHow do I select a Product so I get all rows from Product and also the PropertyType that corresponds to the Product.Property1, Product.Property2, and Product.Property3ProductId | Property1 | Property2 | Property3 | PropertyType1 | PropertyType2 | PropertyType3 PropertyType(1) = PropertyType for Property1PropertyType(2) = PropertyType for Property2PropertyType(3) = PropertyType for Property3I hope this makes sence.Thanks in advance.
I have two tables with the common column-name/ The first one include such columns as the name of football team, its country and budget. The second one include the team name, victories (quantity of it), lost games, and season. So I have the task to select such column as name, victories, lost games in 2nd table but only that ones that has budget over 1 mln? How to build select statement SELECT name, victories, lost g/ from TABLE2 WHERE budget >1000000 from TABLE1? Or should I equates the table1.name=table2.name??
Case: Exporting Report to PDF/Printing/TIFF Report: Contains 1 table with 19 Columns. 1 column is static, the other 18 are visible at the users descretion. Report when printed/exported to pdf spans 2 pages naturally, 16 on the first page, 3 on the second, and the column widths have been adjusted to provide a perfect page span .
User A elects to hide two of the columns, and show the rest. The report complies and the viewable version is perfect, the excel export is perfect.. the PDF export on the first page causes every fith column, starting with the last column that was hidden to be expanded to take up additional width. On the spanned page, it renders the first column on that page correctly, then there is a white space gap equal to the width of the hidden columns and then the rest of the cells show with the last column expanded to take up the same width that the original 2 columns were going to take up, plus its width.
We have tried several different settings to see if it helps this issue or makes it worse. So far cangrow/canshrink/keep together have made no impact. It is not possible to increase the page size due to limited page size selection availablility for the client. There are far too many combinations of what the user can elect to show or hide to put together different tables to show and hide on the same report to remove this effect.
Any help or suggestion on this issue would be appreciated
I have a table A, with two ID columns. In a report both ID colums shouldbe shown with the actual value stored in a second table, BThe problem is, both IDs need to be looked up in B, but are not in thesame row.How do I do this in an efficient way? A sub select?Thanks,--John MexIT: http://johnbokma.com/mexit/personal page: http://johnbokma.com/Experienced programmer available: http://castleamber.com/Happy Customers: http://castleamber.com/testimonials.html
Orders, with OrderID as primary key, a code for the client, and a code for the place of delivery/receipant.
Both the client and place of delivery should be linked to the table:
Relations, where each relation has it's own PrimaryID which is a auto-numbered ID. Now I want to substract my orders, with both the clientcode, and the place of delivery code linked to the relations table, so that for both the name and adress is shown.
I can link one of them by:
InnerJoin On Orders.ClientID = Relations.ClientID, but it's not possible to also link to the ReceipantsID. Is there a way to solve this?
hello im working on a project with a friend and store source files in a subversion server. since we are both working on the same DB everytime one of us makes a change we discover a problem in merging our changes.
is there any tool that can help in merging and making diff?? is there any alternativa?
Say you have a fact table with a few columns that all reference the same key column in a dimension table, you want to write a view to return the information for those keys?
USE MyTestDB; GO SET NOCOUNT ON; IF OBJECT_ID ('dbo.FactTemp' ,'U') IS NOT NULL DROP TABLE dbo.FactTemp;
[Code] ....
I'm using very small data at the moment, and the query plan and statistics don't really say which way.
I have two SQL tables with the following structureInstructor tableINIDINNameINEmailInstructor PhotoIPIDINIDIPPhotoNow my new Instructor table got a new fieldINIDINNameINEmailINPhotoQuestion, how can I merge the Instructor Photo table IPPHoto field into Instructor table INPhoto field? Thank you.
I wonder about the possibility of merging two identical databases on two different servers upon recovering from connection failure between them, using triggers. In order to create a simple synchronization
I have a website wih about 50000 pageviews permonth. I am using multiple access database for each section. for example for photogallery there is a separate database, for jokes there is another one. Now I am thinking to convert my all access databases into MSSQL Server2005 databases.There are about 5 access databases I want to merge them and convert them into 1 MDF file.How to do this?I am very new to SQL Server. Please Help I update access databases in MS ACCESS and upload them in server.When I will use SQL Server Databases How will I update them? From VS2008? Any other method? Or Should I think about creating WebBased control panel for my website like CP present in every CMS(joomla, dotnetnuke etc)? ....................................................................................................................... I have VS2008 and SQL Server 2005 Express.
I have two sql server databases...one holds nothing but personalisation information. The other holds various other types of data. I would like to merge these two DBs into one (including all stored procedures,etc.), but being a relative noob to SQL Server, I can't seem to figure out exactly how to accomplish this. Neither database holds anything that the other holds; data-wise, stored procedure-wise or any other wise. ;-) Can anyone point me in the right direction?
We've got an incident database on our server and we want our consultants could add, modify, delete incidents on our customers sites with their laptop. When they come back we can also synchronise our incidents database with their modifications.
I defined the database on our server ( sql7 sp3) as distibutor and publisher, the other computers coulb be only suscribers.
It would be very easy except for a case :
when a line is modified on our server database and the same line in the same table is modified on the suscriber computer, the changes on publisher (distiributor) seems to have priority on the suscribers. But we would like to control this : we want the suscribers, when they come back, if this case appears, could choose good merging or not if it's possible, and if it is not, we would like at less they could have a message saying they will lost that they change (incident by incident if it's possible)
So what is possible to resolve it by the best way ?
Help!!, Does anyone know of a way that I can merge three seperate fields into one field in my sql statement. EG. SELECT catnumber, catnumber2,catnumber3 FROM Categories WHERE Customer = 'xxxx' and itemnumber = 1 or 2 or 4
I want the catnumber, catnumber2, catnumber3 all in one field so I can sort by it. If anybody could help me it would be greatly appreciated. Thanks Mike
I need to figure out what is the easiest way to do this is. I have two tables that have the following columns:
Code:
TABLE 1 AcctNbr, GiftRef, Gdate, PayCode, Amt
Table 2 GiftRef, Amt, MotvCode, FundId
I need to merge the two tables with GiftRef being the common table between them. I have exported the tables from MSSQL to Access and am wondering what the easiest way to do this is. Is there an SQL Query that can merge the two tables on export by GiftRef? Is it easier to do this in Access now that I've exported the two Tables? Any help on this would be awesome. Thanks.
My client drops for me many files like this on a shared drive M: daily 1_Test.csv 2_Test.csv 3_Test.csv
I would like you to advice on how to write a SQL code (that can include DTS if possible) that will take this files, merge them into one (since they have same columns) and send them to another client as one file. But it must only take the files of the same date and must not resend files i have send already. I need this to be an automated process since the files are dumped into M:drive midnite and I need this code so that I can schedule it as a job and run around 4h00am.
I'm pretty new to SQL altogether. I kinda gave myself a crash-course when the software I was using, Papertrack, was having problems. It all started when I tried to move the database. Now there are two separate databases that I can see on SQL Enterprise manager. I picked up the book and figured some things out, but still don't know how to merge the databases. I called the support for the software and got to know them on a middle-name basis. Is there a way I can merge the two databases so that the software can pull queries from both and access the files? To anyone that likes a challenge,
