I installed the hotfix available at support.microsoft.com/kb/936971 and even rebooted the server, but I am still getting the error. I am working on a Windows 2003 server with SQL Server 2005 (and reporting services). I am not trying to publish any reports using SSRS. I'm just working on designs and saving them. Any help for this at this point?
Leigh
if i get this message one more time I am going to put my fist through my monitor
View 114 Replies View RelatedHello,
While tryign to edit the XML for the rdl , i am stuck it will not allow me to edit and i have to kill the devenv process and open vs again.
I looked through some of the threads and tried apply KB 936971 Hot Fix and I am running into the following error.
The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch."
Did any one come across this. Any assistance would be greatly appreciated
Thanks,
SqlNew
has anyone encountered the "microsoft visual studio cannot shut down because a modal dialog is active. close the active dialog and try again." error when shutting down.
i have been getting that every once and awhile, and do not see any open dialog windows that need to be closed, and i end up having to end-task on my visual studio session.
does anyone know what is causing this error and how to avoid it?
thanks a bunch!
-dk
I saw a powerpoint slide with a Configure Sync Settings dialog in visual studio. I am unable to find this dialog in visual studio team system. Can someone tell me how to get to this Configure sync settings dialog?
View 4 Replies View RelatedI can't download this fix due to a block on FTM downloads and it is driving me round the bend.
Does anyone know where it is possible to get hold of the fix?
Was this included in SP1 (vs.net)?
Hi,
Please give me some idea to persist or set title of modal dialog during postback.
The title of modal dialog is going lost whenever postback happen on modal dialog.
document.title is not working after postback.
Thanks,
Sandeep, India
I have a query that executes just fine except that it won't recognize varchar(255) ( or any other value within the () ) and if I leave it off like this: varchar, then it executes but it leaves that value as 1 and that is just not very useful for my purposes. This also happens with anything else that requires () to add length such as char(), or nvarchar(), etc... Any ideas?
View 1 Replies View RelatedHi
I am new to all SQL Related. I am trying to create a datasource to our old database we used in the company to write reports on the data. when I create a new data source and enter all required info, when testing the connection, i get a reply that I do not have the necessary permissions to use this object, although my account is specified as an administrator? can somebody please explain this to me.
I get this message in a balloon that pops up frequently when I am trying to work in the SSIS designer. For example, I get it when working in a DataFlow task, trying to open editors for the OleDb Source and Destination. Is anyone else getting this? What could be the cause, it seems to get sluggish. Thanks.
View 33 Replies View Related
Hi
I am new to all SQL Related. I am trying to create a datasource to our old database we used in the company to write reports on the data. when I create a new data source and enter all required info, when testing the connection, i get a reply that I do not have the necessary permissions to use this object, although my account is specified as an administrator? can somebody please explain this to me.
How do you define a JDBC datasource in Microsoft Visual Studio? I am using Microsoft Visual Studio to develop reports for SSRS and would like to connect to DB2 via JDBC. Attempting to use the SQL JDBC install as a example, I don't see how to define the SQL JDBC driver to Visual Studio. The SQL JDBC runtime install is very clear, but I don't see how to use this type of datasource in Visual Studio.
Thanks!
I'm in a SSIS Package Design tab working on a data flow. It was working fine up to now, but all of a sudden I keep getting this error that says, "Microsoft Visual Studio has encountered a problem and needs to close." And it has that "Send Error Report" and "Don't Send" button at the bottom. This started happening when I tried to add a Data Viewer on a Data Flow Path. And now every time I do this to try to debug my data flow, it gives me this message and closes my project.
However, the package executes without any package errors, but I as I described above, I can't add a Data Viewer because it keeps giving me this message and closing my package.
Hi
I have around 160 packages in SSIS. When i run these packages, after some times the errror comes that the system is low on virtual memory and then visual studio freezes. I have a machine with 1G memory. All these packages are not running parallely but they have some dependencies defined on them.
Please let me know if theres some way to configure it correctly,
Thanks,
Vipul
I have created one Custom Task in SSIS. Basically I have one solution and 2 class library project one for Task and one for UserInterface
when i try to drag new task from tool box it says following errror
===================================
Failed to create the task. (Microsoft Visual Studio)
===================================
The task editor of the type 'CustomErrorControl.CustomControlnew,CustomErrorControl,Version=1.0.0.0,Culture=Neutral,PublicKeyToken= 0c2b681d5171851e' is not installed correctly. (Microsoft.DataTransformationServices.Design)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=TaskEditorNotProperlyInstalled&LinkId=20476
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.DtrTaskDesigner.InitializeTaskUI()
at Microsoft.DataTransformationServices.Design.DtrTaskDesigner.OnNewTaskAdded()
at Microsoft.DataTransformationServices.Design.DtsBasePackageDesigner.CreateExecutable(String moniker, IDTSSequence container, String name)
CustomErrorControl is my name space and CustomControlNew is my class name.
does it TypeName should appear like what i have?
I have unstalled it and try to reinstall it. change the stong name key and they try again but somehow same error..
Please help..
I'm now getting this with great regularity. Dell PWS390,2gig,Big HD,experienced user C++...Refactor recently installed although I do not use it.
CLEARLY, the hang comes when one highlites a line and then cursors down to highlight additional lines...I believe this invokes refactoring --- while pre-refactoring install would get a hang occasionally, I now get one frequently. I am uninstalling refactor....
Hello all,
Over the weekend, I loaded the SQL Server SP2 on to my production database after having it on my dev server for two weeks with out any problems.
After I did this, I went to check all my SSIS packages and found them not able to load.
I get this message €œMicrosoft Visual Studio is unable to load this document: The package failed to load due to error 0xC0010014 €œOne or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors€?. This occurs when CPackage::LoadFromXML fails.
Now when I look at the errors I see:
Error 1 Error loading Master_Full_Weekly.dtsx: Error loading value "<DTS:LogProvider xmlns : DTS="www.microsoft.com/SqlServer/Dts" > <DTS : Property DTS:Name="ConfigString">SQL_TPMTSH_Datamart</DTS: Property><DTS : Property DTS:Name="DelayValidation">0</DTS: Property><DTS: Property DTS:Name="ObjectName">DTS Log Provider for SQL Serve" from node "DTS: LogProvider". D:ETLProjectsTPMTPMTSHMaster_Full_Weekly.dtsx 1 1
Does anyone know what this is about and how I can go about fixing it?
I have all this gray space at the top of my tasks. When I <Ctrl>+<Alt>+<Left-click> to select all of my tasks and then try sliding it up, it creates even more gray space and actually moves it down. If instead when I <Ctrl>+<Alt>+<Left-click> and then <Ctrl>+<Arrow-up> it doesn't move it. Is there any easy way to eliminate all this gray space at the top?
View 3 Replies View RelatedHi
View 8 Replies View RelatedHi Everyone,
Please help me on this issue. I'm a new SSIS User.
I've installed Sql Server 2005 Developer Edition
When I create a new SSIS Project in Business Intelligence Development Studio,
I get the following message:
"Microsoft Visual Studio is unable to load this document: Object reference is not set to an instance of an object".
Error loading 'package.dtsx'bject reference is not set to an instance of an object
When I try to debug the package, I get the below message:
parameter Component(System.Design) is null.
I've uninstalled and installed SS 2005 several times, yet the problem persists.
Please help.
This is the package.dtsx
<?xml version="1.0"?><DTS:Executable xmlnsTS="www.microsoft.com/SqlServer/Dts" DTS:ExecutableType="MSDTS.Package.1"><DTSroperty DTS:Name="PackageFormatVersion">2</DTSroperty><DTSroperty DTS:Name="VersionComments"></DTSroperty><DTSroperty DTS:Name="CreatorName">USkothand1</DTSroperty><DTSroperty DTS:Name="CreatorComputerName">US6051KOTHAND1</DTSroperty><DTSroperty DTS:Name="CreationDate" DTSataType="7">4/8/2008 10:53:39 AM</DTSroperty><DTSroperty DTS:Name="PackageType">5</DTSroperty><DTSroperty DTS:Name="ProtectionLevel">1</DTSroperty><DTSroperty DTS:Name="MaxConcurrentExecutables">-1</DTSroperty><DTSroperty DTS:Name="PackagePriorityClass">0</DTSroperty><DTSroperty DTS:Name="VersionMajor">1</DTSroperty><DTSroperty DTS:Name="VersionMinor">0</DTSroperty><DTSroperty DTS:Name="VersionBuild">0</DTSroperty><DTSroperty DTS:Name="VersionGUID">{FBD98635-EDDE-4F58-9D53-356E8CB653FB}</DTSroperty><DTSroperty DTS:Name="EnableConfig">0</DTSroperty><DTSroperty DTS:Name="CheckpointFileName"></DTSroperty><DTSroperty DTS:Name="SaveCheckpoints">0</DTSroperty><DTSroperty DTS:Name="CheckpointUsage">0</DTSroperty><DTSroperty DTS:Name="SuppressConfigurationWarnings">0</DTSroperty><DTSroperty DTS:Name="ForceExecValue">0</DTSroperty><DTSroperty DTS:Name="ExecValue" DTSataType="3">0</DTSroperty><DTSroperty DTS:Name="ForceExecutionResult">-1</DTSroperty><DTSroperty DTS:Name="Disabled">0</DTSroperty><DTSroperty DTS:Name="FailPackageOnFailure">0</DTSroperty><DTSroperty DTS:Name="FailParentOnFailure">0</DTSroperty><DTSroperty DTS:Name="MaxErrorCount">1</DTSroperty><DTSroperty DTS:Name="ISOLevel">1048576</DTSroperty><DTSroperty DTS:Name="LocaleID">1033</DTSroperty><DTSroperty DTS:Name="TransactionOption">1</DTSroperty><DTSroperty DTS:Name="DelayValidation">0</DTSroperty>
<DTS:LoggingOptions><DTSroperty DTS:Name="LoggingMode">0</DTSroperty><DTSroperty DTS:Name="FilterKind">1</DTSroperty><DTSroperty DTS:Name="EventFilter" DTSataType="8"></DTSroperty></DTS:LoggingOptions><DTSroperty DTS:Name="ObjectName">Package</DTSroperty><DTSroperty DTS:Name="DTSID">{191D188C-EA6E-46D6-A46A-8C9F3C21C321}</DTSroperty><DTSroperty DTS:Name="Description"></DTSroperty><DTSroperty DTS:Name="CreationName">MSDTS.Package.1</DTSroperty><DTSroperty DTS:Name="DisableEventHandlers">0</DTSroperty></DTS:Executable>
Thanks
Best Regards
Hello, How are you?
I have a problem when I try to create a new connection with Microsoft SQL Server 2005 Compact Edition from Visual Studio 2005 IDE. When I€™m going to choose the data source, the SQL Server 2005 Compact Edition provider doesn€™t appear in the list. I installed the SQL Server 2005 Compact Edition from this page http://www.microsoft.com/downloads/details.aspx?FamilyId=%2085E0C3CE-3FA1-453A-8CE9-AF6CA20946C3&displaylang=en. In the additional information says by installing SQLServerCE31-EN.msi installs the provider (System.Data.SqlServerCe.dll) in the GAC (global assembly cache) and registers the OLEDB provider (sqlceoledb30.dll). So, I don€™t understand why couldn€™t I create a new connection with Microsoft SQL Server 2005 Compact Edition from Visual Studio 2005 IDE?
I appreciate your help€¦
Hello. I have received the follwoing error upon an attempt to Browse the Cube. All other tabs are functional, including the Calculations tab. We are running Windows Server 2003 SP2 and SQL Server 2005 SP2. Any suggestions would be greatly appreciated!
**EDIT** - Have confirmed SP1 for VS2005 is installed both locally and on server, also.
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.Office.Interop.Owc11.PivotView.get_FieldSets()
at Microsoft.AnalysisServices.Controls.PivotTableFontAdjustor.TransformFonts(Font font)
at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdatePivotTable(Boolean translate)
at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdateAll(Boolean translate)
at Microsoft.AnalysisServices.Browse.CubeBrowser.InitialUpdate()
at Microsoft.AnalysisServices.Browse.CubeBrowser.SupportFunctionWhichCanFail(FunctionWhichCanFail function)
I ask because I'm still looking for the source of interface problems I have in using the SSIS designer.
View 4 Replies View RelatedI start SQL Server Management Studio on my workstation and get the following message.
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to open connection dialog.
------------------------------
ADDITIONAL INFORMATION:
Could not load file or assembly 'SqlMgmt, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040) (mscorlib)
------------------------------
BUTTONS:
OK
------------------------------
I had SQl Express version installed previously and everything worked. I could connect to one server running SQL Express and a different server running full up SQL 2005 enterprise version.
I uninstalled All SQL express programs and installed tools from SQL 2005 developer.
I have rebooted, started the program directly (not using a link of any kind) and all attempts fail. After dismissing the error msg the tool opens and I can run queries agains the DB but the database engines and related tables do not show.
My work station is Windows XP with SP2 installed.
I have googled the problem extensively and tried solutions found but none have solved the problem.
Any help greatly appreciated.
I have a database in my "App_Data" folder of my visual studio project. I can view it fine in Visual Studio's built-in tools for managing a database attached to a solution. However i recently started playing around with the SQL Server Management Studio Express program. When i attach my database to Management Studio, and try to run my program it crashes. I think it might be a permissions error?!? When i detatch it and reattach it in visual studio it runs fine again. Any suggestions? ThanksJason
View 1 Replies View RelatedI recently installed the Evaluation Edition of SQL Server 2005 x64 and it appears that MS Visual Studio 2005 is installed in stead of SQL Server Business Intelligence Development Studio. When I choose new project the only template available is "Blank Solution". How do I get all the templates (i.e. Analysis Server Project, Integration Services Project, Report Model Project, Report Server Wizard project, etc.)?
Or would it be better to uninstall MS Visual Studio 2005 and attempt to reinstall BIDS?
I am new to visual studio and I am still not sure of all its components and features.
I installed visual studio 2005 standard edition but cannot find SQL Server Management Studio?
I guess this must be because it is not included with Visual studio 2005 standard. Is it included with VS 2005 professional?
I want to add pictures of products to my shopping site using an SQL database and I’ve been told that SQL Server Management studio is required as it is a graphical tool.
How would I go about obtaining the SQL server management studio. There seems to be different versions of SQL server that it is confusing to know which one to purchase.
Will the SQL server 2005 version that comes with Visual studio standard be sufficient for me now right? I want to create a shopping site with hundreds, perhaps even thousands of products. I want to use an SQL server 2005 database. The database will include ‘dynamically generated’ product images if that is the correct terminology.
My goodness, it seems I still have so much to learn.
Thanks
I have created a database under management studio and i want it to be connected in visual studio but it failed
the error msgs said that the database can't be connected coz the database with same name exits but that is not true
How do i get the database that i am using in visual studio into my SQL server management studio?
i need to create some scripts to create stored procedures on a live server.
I have SSRS in Visual Studio. I created a query that works fine in SQL Server Management Studio, but when pasted into Visual Studio I get the error "An expression of non-boolean type specified in a context where a condition is expected, near '('.
Here is the query. Can anyone help on why this isn't working? Thanks.
SELECT CASE WHEN MONTH(dbo.MAS_CCS_ARN_InvHistoryHeader.SOTransDate) = MONTH(GETDATE()) AND YEAR(dbo.MAS_CCS_ARN_InvHistoryHeader.SOTransDate) = YEAR(GETDATE())
THEN dbo.MAS_CCS_ARO_InvHistoryDetail.SOExtChargeAmount ELSE 0 END AS CurrentMonth,
CASE WHEN SubString(dbo.MAS_CCS_GL_Account.Account,1,3) = '400' THEN 'ALEDO' ELSE ' ' END AS Location,
dbo.MAS_CCS_ARN_InvHistoryHeader.SOTransDate, dbo.MAS_CCS_ARN_InvHistoryHeader.InvoiceNumber,
dbo.MAS_CCS_AR1_CustomerMaster.CustomerName, dbo.MAS_CCS_ARO_InvHistoryDetail.DetailSeqNumber,
dbo.MAS_CCS_ARO_InvHistoryDetail.LineType, dbo.MAS_CCS_GL_Account.Account, dbo.MAS_CCS_ARO_InvHistoryDetail.SOExtChargeAmount
FROM dbo.MAS_CCS_AR1_CustomerMaster, dbo.MAS_CCS_ARN_InvHistoryHeader, dbo.MAS_CCS_ARO_InvHistoryDetail,
dbo.MAS_CCS_GL_Account
WHERE dbo.MAS_CCS_AR1_CustomerMaster.CustomerNumber = dbo.MAS_CCS_ARN_InvHistoryHeader.CustomerNumber AND
dbo.MAS_CCS_ARN_InvHistoryHeader.InvoiceNumber = dbo.MAS_CCS_ARO_InvHistoryDetail.InvoiceNumber AND
dbo.MAS_CCS_ARO_InvHistoryDetail.SOGLSalesAcct = dbo.MAS_CCS_GL_Account.AccountKey
I have installed Visual Studio 2005 which includes SQL Server Express but not the Management Studio.
Can I install SQL Server Management Studio Express?
Hi,
Where can I download the OLE DB Provider for Microsoft Active Directory Service.
I'm using sql server 2005, windows server 2003. not sure the version of AD. (all 32 bit).
Cheers
Chris
I am having issues with sql commands. I have 2 tables joined that shows me set sales and equipment sold to customers. Now my issue is I dont want all the customers showing. Their is a field that is types of sales (aka on rent, reserved). When I do a querie it shows all cust for all types of sales. What would the command and how would it look. I thought about it and i figured I should use a If cust type sale is = to on rent and reserved then show cust name. The next thing is I dont want this to be the primary filter and it should only be a filter for cust name and not affect the results of the info already gathered. any help would be great thanks.
View 14 Replies View Related