when i try to establish mirroring with the below command i am getting an error..
alter database SharePoint_AdminContent_c32bc-190-4-b1-1cab
set partner = 'tcp://mirror-server.3000';
go
the error :
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near '-'.
i am not sure why it's throwing an error..any help would be appreciated...
thanks
Hi, I'm having an issue setting up Database Mirroring. The environment here could be an issue.
I'm trying to set this up using 2 different servers both are SQL Ent Edition SP2, windows 2003. I'm not using a witness at this time. The 2 servers do not belong to a domain. They are both in workgroups.
I can setup the endpoints and everything up to the point just before I start mirroring. The issues happen when I go to start mirroring. It gives me a nasty error "please use a FQDN to establish the endpoints. The problem here is I don’t have any FQDN for these servers since they're in a Workgroup.
So, my question here is and I haven't found anything stating that you can't set up mirroring in a workgroup environment but is it possible? I'm assuming since its yelling at me for a FQDN that I can't. Is there any other ways to implement mirroring without a domain?
Thanks for your time, help!
Hello room,
I am newbie to Database mirroring.
I have 3 window server 2003 running in window virtual server 2005.
Server1 of sql 2005 instance:
-- SQLDev01
Server2 of sql 2005 instance:
-- SQLDev02
Serve3 of sql 2005 instance:
-- SQLDev03
The servers are running on DC and the sql servers was setup with Window authentication mode only.
Also, All the sql instances'services are running under single domain user name.
e.g: sqladmin.
I have tried to setup manually and t-sql and both running into some issues.
Can anyone help and share t-sript to setup database mirroring.?
Thanks for the help.
TJ
Hi:
I am looking for a Step-by-Step document for setting up and configuring of database mirroring if one is available. I have gone through BOL and found some related documentation but want to see if a step-by-step document is available. If so can any one please direct me to the resource.
Thank you
AK
I'm setting it up using the directions provided by Microsoft @
http://msdn2.microsoft.com/en-us/library/ms189047.aspx
The problem I originally ran into was exactly like the one mentioned in the
following posting:
http://www.microsoft.com/technet/community/newsgroups/managed/dgbrowser/en-us/default.mspx?&query=mirroring&lang=en&cr=US&guid=&sloc=en-US&dg=microsoft.public.sqlserver.clustering&p=1&tid=95381f96-a34a-4d99-9e31-12719452a11d
I found an article online stating that this can occur of your principle
backup wasn't restored to the mirror server in NO RECOVERY mode. I missed
that step when performing the first restore, so i deleted that database and
started over using the NO RECOVERY option on the mirror restore.
The problem I've run into now is that after my restore executes and
completes, the database remains in a (Restoring...) state and never becomes
accessible.
Anyone know what causes this?
Thank you,
- Tyler
I am trying to work through a test on database mirroring I am following the whitepaper that Micrososft published on how to configure mirroring and sahrepoint, but when i failover the config database and admin content database it doesnt appear to work. I execute the following commands after both are failed over
----
stsadm.exe -o renameserver -oldservername <OldPrincipalServer> -newservername <NewPrincipalServer>
iisreset
----
It doesnt work it get the following error.
Unable to connect to database. Check database connection information and make sure the database server is running.
When i bring the admin content databse back to the original principle the admin site works great.
What am I missing?
Hi, iam from Mexico,
somebody has installed SQL 2005 with mirroring and sharepoint 2007?
regards.
thanks
I have 2 servers a sharepoint frontend/sql server and a SSRS server. I have installed SQL2005 SP2 and am trying to configure the SSRS box for Sharepoint Inegration. I created the Database for the new sharepoint integration mode. But when I look at the configuration manager for SSRS I see that the Sharepoint Integration is not configured. I see this in the config manager "...Windows Sharepoint Services object model is not installed..."
I have done this before but I can figure out to install just the wss object model.
Any help would be great.
Erik
Prepare to setup DB mirroring. Three MS 2003 servers. Two SQL 2005 standard edition as partners and one SQL 2005 Express as witness. Question:
1. Servers are under workgroup (not domain user). Is it ok to use local service account to run DB engine service on all three machine? Is SQLServerAgent service required when setup mirroring?
2. If SQL Server is running as a local service, Do I have to manually create certificates before setup mirroring?
3. After create certificates, can management studio be used to create endpoints on all three machines? If yes, how to select certificates that have been created? If no, can management studio be used to setup mirroring after endpoints have been created?
After going through the Enterprise Manage mirroring setup, I get the error message ...
The server network address "TCP://MYMACH.mynet.net:5022" can not be reached or does not exist. Check the network address name and reissue the command. (Microsoft SQL Server, Error: 1418)
I have three instances of SQL Server 2005 Enterprise Edtion
MSSQLSERVER (primary) endpoint 5022
MSSQLSERVER (partner) endpoint 5023
MSSQLSERVER (witness) endpoint 5024
I have enabled TCPIP and named pipes on all three protocols.
In surface configuration I have enabled everything.
Each instance has the -T1400 flag set.
Each instance is running under mixed security.
Each sql Server and sql agent instance runs exactly in the same domain account.
The machine has been rebooted.
The following tests all pass
telnet MYMACH.mynet.net 5022
telnet MYMACH.mynet.net 5023
telnet MYMACH.mynet.net 5024
This problem happens both with Enterprise Edition and Developer Edition.
Any ideas?
AIM
I have installed SBS 2003 Premium with Exchange 2003 SP1 and now I want to install SQL server 2005 workgroup edition.
Heres what I noticed during setup, following the steps of the Server 2005 Workgroup Edition instructions, starting with Upgrading the Sharepoint instance of WMSDE.
Preparing the http://companyweb website:
Step 4. I should make a backup of the data directory within program filesMicrosoft SQL ServerMSSQL$SHAREPOINT directory. However there is no data-directory there, so nothing to backup there. This is probably the reason for all the rest of the issues, however what does it mean, why is there no such directory present? I checked before doing the sql install that by going to http://companyweb I did indeed land on the sharepoint internal website.
Rest goes all normal, until :
Attaching the databasefiles to the new SHAREPOINT instance of SQL server 2005.
Step 4.: go to MSSQL$SHAREPOINTdata. Not only is there no such subdirectory now, the whole MSSQL$SHAREPOINT directory has in fact now disappeared. So steps 4 till 6 cannot be performed now.
Then further to
Enable full text search in Windows Sharepoint services
Step 2. Remark: I get the error message as described there, however the solution would be to start the SQL server (Shareoint service. However that service is up and running
Furthermore when I go to http://companyweb now, I also get the errormessage indicating no connection can be established with the configuration database.
When I check for services, I find that the whole MSSQL$SHAREPOINT service has disappeared from the list of services.
Hello, everyone
I try to set up Sharepoint Portal Server 2003 in SQL Server 2005 database (on Windows 2003 Server R2). But It cannot create new portal site... the Error message told about "cannot access instance..." (in fact that I input the correct instance, user, and password)...??? I wanna know that How to setup it...
Setapong
What are the DB mirroring trace flags and how to use ?
View 4 Replies View RelatedWould anyone have a suggestion on how to setup a partner to partner NIC configuration for heartbeats/mirroring traffic? I've been told this is the recommended setup but have not found much on how to do it. We currently have a teamed NIC config for redundancy, but would like to have a separate set of NICs on each partner so that mirroring traffic is not interrupted by any regular network traffic.
We also have a witness running in full safety mode. Does this mean partnerA and partner B both need NICs with a crossover cable between them AND is it recommended for the witness to also have extra NICs to both partnerA and partnerB (w/ crossover cables)?
Any suggestions/help/links on properly configuring this would be appreciated.
Server A = primary SQL DBs (mirroring origination)
Server B = failover SQL DBs (mirroring destination)
For database mirroring a witness is required.
Can the witness live in another instance of SQL on server B?
I have a 2 node cluster having 4 cores each wherein having 3 instances of SQL 2008 R2 enterprise comprising of 60 databases, 20 on each instance. I need to setup mirroring for each of the databases to a secondary server having 4 cores and 3 instances.
What i understand is that in this case the mirror server will be providing max of 512 worker threads and the 60 mirror databases would consume 240 threads.
What all needs to be checked for looking into the feasibility of going ahead with a async mirror setup as mentioned above.
We have a database. It is enabled for mirroring. We need to delete the old records. That is around 500k records from a table. But it has foreign key relation. How to do in Production servers these kind of deletes?
View 2 Replies View RelatedUsing SQL Server 2008, we would like propose mirroring between two servers of a critical database. Since we initiate, may require to clarify on its purpose and also required changes from application end.Any changes required from OS Level? (I believe both servers IP or Host name should be added in host entries. Mirroring ports should be allowed/open including Principal and mirror server IP Addresses): Windows Team.Any changes required from Application? (Instance name, authentication: user name and its password should be added in web config files): Application Team.Any changes required from Network Team?Also for mirroring both the principal and mirror servers should be with same version, does it only mean SQL Server 2008 versions are enough or does it also mean to say build numbers 10.00.4000 should also be same.URL....
View 5 Replies View RelatedI get the following error when I try to navigate to a report/model/data source, stored in a Sharepoint Document Library using a Sharepoint URL based on an Extranet or Intranet zone - but it works OK using the url for the Default zone:
System.Web.Services.Protocols.SoapException: The specified path refers to a SharePoint zone that is not supported. The default zone path must be used. ---> Microsoft.ReportingServices.Diagnostics.Utilities.SecurityZoneNotSupportedException: The specified path refers to a SharePoint zone that is not supported. The default zone path must be used.
Is this a limitation of the SQLRS-WSS3 integration or is there a workaround?
Many thanks to anyone who can help!
Does anyone know the location of Microsoft.ReportingServices.SharePoint.UI.WebParts.dll after you install the web part? I am wondering if I can inherit from this web part to wrap some other functionality into it. I know that i see it in the GAC buyt can't seem to find it so I can look at the assembly using reflector.
Also, how easy is it to pass in parameters to the Report Viewer?
Thanks!
Erik
Since I wasn't getting any replies with answers or suggestions to my initial posting, I figured I would continue to list the problems and solutions I've encountered while trying to setup and utilize SharePoint integration mode, and read data from SharePoint with SSRS reports (developed in VS2005). Hopefully this is helpful to anyone that is also trying to learn all this stuff and figure it out.
(Single server - W2K3R2_SP2 as: DC / SQL2005 Standard / MOSS2007 Enterprise - see the bottom of this posting for the steps I took to set that up)
Note: After I get this to work, I intend to post my experiences for setting up SharePoint Integration with SQL and SP on separate boxes.
1. In the new reporting section under SharePoint application management in the Central Admin Console, the Grant database AND Set Server Defaults work when using the domain admin account, but not when using the SQLSPS service account I used to setup both SQL and SharePoint. Why can't I use the service account? Is the domain admin account now going to be used as a service account for accessing the sharepoint database?
This question remains unanswered as of yet.
2. Reporting Services configuration tool shows Sharepoint integration as red x when I create a new database in integration mode. (the service account SQLSPS and the Server object are members of the group WSS_WPG). If I switch back to native mode (the original reportserver database), the red x goes to a blue exclamation instead. Using Service Credentials or Windows credentials (as either the service account SQLSPS or as domain admin) doesn't change anything.
RESOLVED by using a domain user account for the ReportServer WebApp. Even though everything is installed on the same machine, it seems using the default of NETWORK SERVICE wasn't acceptable. Possibly because SharePoint is configured to allow additional machines in the farm?
3. http://servername:8080/reportserver will display Report Server information as it did before the integration on port 80, but http://servername/reportserver doesn't display anything through SharePoint.
Resolved. I needed to define a repository before I could view it (go figure). When I created a sharepoint site based on a report center template, created a data connection library and report library, and then referenced that by http://servername/sites/myReportCenterSite/myReportLibrary, I was able to see the equivalent of http://servername/reports (which is now disabled due to integration mode).
4. Unable to deploy to new report center sharepoint site I mention above using Visual Studio. I kept getting "A connection could not be made to the report server http://servername/sites/ReportCenter. Server was unable to process request. The request failed with HTTP status 503: Service unavailable (System.Web.Services). In Visual Studio, the project properties were: TargetDataSourceFolder = http://servername/sites/myReportCenterSite/myDataConnectionLibrary, TargetReportFolder = http://servername/sites/myReportCenterSite/myReportLibrary, TargetServerURL = http://servername/sites/myReportCenterSite/
Found these errors in the event logs on the server.
Event Type: Warning
Event Source: W3SVC
Event ID: 1021
Description:
The identity of application pool, 'ReportServer' is invalid. If it remains invalid when the first request for the application pool is processed, the application pool will be disabled. The data field contains the error number.
Event Type: Warning
Event Source: W3SVC
Event ID: 1057
Description:
The identity of application pool 'ReportServer' is invalid, so the World Wide Web Publishing Service can not create a worker process to serve the application pool. Therefore, the application pool has been disabled.
Event Type: Error
Event Source: W3SVC
Event ID: 1059
Description:
A failure was encountered while launching the process serving application pool 'ReportServer'. The application pool has been disabled.
RESOLVED the issue by changing the Application Pool used by reporting services from ReportServer to DefaultAppPool and changing the account DefaultAppPool used from NETWORK SERVICE to my service account SQLSPS. I have no idea why ReportServer is invalid, it was set to use the service account SQLSPS the same as DefaultAppPool is. Perhaps the reporting services add-on makes a change to invalidate this?
5. Attempting to read a SharePoint list using a SSRS report. This should be fun.
First, created a new custom list in the ReportCenter SharePoint sites I've been using and called it myCustomList. I added one item with a title of myCustomListItem1. I don't know if I need to do more than that for a simple test of reporting or not yet.
Second, configured new shared data source. Name = myCustomList1DataSource, type=XML, Connection String = http://servername/_vti_bin/lists.asmx (this URL is viewable in IE), Using Windows authenticaion.
Third, in VS2005 on a workstation in the domain, create new report item (report1.rdl). New dataset for report; Name=Report1DataSet, Data Source=myCustomList1DataSource (Shared), Command type = text, Query String = [See Queries and associated errors below]:
Initial query obtained from: Connecting SQL Reporting Services to a SharePoint List (David Wise)
http://www.sharepointblogs.com/dwise/archive/2007/11/28/connecting-sql-reporting-services-to-a-sharepoint-list-redux.aspx
Note: Queries when executing the dataset (which errors out) and when executing a query in CAML Viewer for the same information (which does work just fine) both initially return 401.1 and 401.2 errors (as viewed in Fiddler). Since the CAML query works, I have not tracked this down yet.
A. Original format from posting
<Query>
<Method Namespace=http://schemas.microsoft.com/sharepoint/soap/ Name="GetListItems"/>
<SoapAction>
http://schemas.microsoft.com/sharepoint/soap/GetListItems
</SoapAction>
</Query>
Parameter; Name => listName, Value => =myCustomList
Was NOT prompted to define the query parameters
- Gets this error: "An error occurred while setting the command text property of the data extension command. The XmlDP query is invalid. (Microsoft.ReportingServices.DataExtensions)."
- Advanced information from the error => 'http' is an unexpected token. The expected token is '"' or '''. Line 2, position 19. (System.Xml)
B. Changed: Placed the namespace URL in quotes (also tried with and without / in namespace after /soap)
<Query>
<Method Namespace="http://schemas.microsoft.com/sharepoint/soap/" Name="GetListItems"/>
<SoapAction>http://schemas.microsoft.com/sharepoint/soap/GetListItems
</SoapAction>
</Query>
Parameter; Name => listName, Value => =myCustomList (also tried Value => myCustomList) (no equal sign)
Clicked "!" to execute, and got prompted to define the query parameters
Entered Name => listName, Value => myCustomList
- Gets this error: "failed to execute web request for the specified URL (Microsoft.ReportingServices.DataExtensions)."
- Advanced information: <faultstring>Server did not recognize the value of HTTP Header SOAPAction: http://schemas.microsoft.com/sharepoint/soap/GetListItems/.</faultstring>
C. Try the query string that seems to work for Stramit CAML Viewer to read myCustomList
Stramit CAML query:
<Query xmlns="http://schemas.microsoft.com/sharepoint/soap/">
<OrderBy>
<FieldRef Name="ID" />
</OrderBy>
</Query>
Also tried
<Query xmlns="http://schemas.microsoft.com/sharepoint/soap/">
</Query>
And tried entering no query...
Parameter; Name => listName, Value => =myCustomList (also tried Value => myCustomList) (no equal sign)
Clicked "!" to execute, and got prompted to define the query parameters
Entered Name => listName, Value => myCustomList
- Gets this error: "failed to execute web request for the specified URL (Microsoft.ReportingServices.DataExtensions)."
- Advanced information: <soap:Fault><soap:Code><soap:Value>soap:Receiver</soap:Value></soap:Code><soap:Reason><soap:Text xml:lang="en">Server was unable to process request. ---> Data at the root level is invalid. Line 1, position 1.</soap:Text></soap:Reason><soap: Detail /></soap:Fault>
RESOLVED. Went back to the query used in B above, and mysteriously it works now. This could be the "funny things happen" symptom I've been reading about. We'll see if it continues to function.
Here's what I've learned so far on Issue #5:
1. XML is confusing. XmlDP is even more confusing...whatever that is. Apparently it's new to/with Reporting Services in SharePoint integration mode?
2. There is far too little documentation regarding XmlDP and querying SharePoint lists from SQL Reporting Services.
3. According to http://msdn2.microsoft.com/en-us/library/ms159741.aspx: You must use the generic query designer to create the query. The query is not analyzed to identify parameters; therefore you must create parameters through the Parameter tab on the Dataset dialog box.
Tried this query:
<Query>
<SoapAction>http://schemas.microsoft.com/sharepoint/soap/GetListItems</SoapAction>
<Method Namespace="http://schemas.microsoft.com/sharepoint/soap/" Name="GetListItems" />
<Parameters>
<Parameter Name="listName">
<DefaultValue>myCustomReport2</DefaultValue>
</Parameter>
<OrderBy>
<FieldRef name="ows_Date" />
</OrderBy>
</Parameters>
</Query>
I was still prompted for the listName and the list returned with ows_Date still out of order. So maybe that proves this statement is true?
<translation: why make it convenient when it's already [somewhat] functional?>
4. When building the dataset, anything I place in the "Query string" box has to be enclosed in <query></query> tags or it errors out. I am trying to understand how to translate the CAML viewer query (which does work but isn't wrapped in query tags) into something that fits between query tags, and it hasn't gone well so far.
<translation: To be at one with your reports Grasshopper, you must understand xml>
5. According to http://srv1/sites/ReportCenter/_vti_bin/lists.asmx, "GetListItems" operation is supported
<translation: you're getting warmer...>
6. According to the soap output of my site http://srv1/sites/ReportCenter/_vti_bin/lists.asmx?op=GetListItems, I am only allowed to specify the following parameters: listName, viewName, query, viewFields, rowLimit, queryOptions and webID.
<translation: that and $3.00 will get you a cup of coffee>
7. According to http://www.sharepointblogs.com/dwise/archive/2007/11/28/connecting-sql-reporting-services-to-a-sharepoint-list-redux.aspx, only listName, viewName and rowLimit parameters are usable(?) (query and queryOptions may not be working properly with SSRS).
<translation: that kind of sucks>
8. When this started mysteriously working again, I tested using the "/" at the end of the namespace (wouldn't work without) and the "=" sign in front of the parameter value as defined on the parameter tab of the dataset (turns out to be optional).
As long as I can query SharePoint and get my list information back, I'm going to consider this issue closed and move on to actually using this information in a report. I'm sure that won't work right either, but why stop now?!
6. Ok, now that I can read SharePoint list data with SSRS, I need to try and actually do something with it.
A. Begin by setting up new data to report on
1. Create a new custom list (myCustomList2) and add a test record. This list will simulate the data we intend to submit to SharePoint using InfoPath, so it has a number of custom/created columns in it
2. Modify the working information from #5 above; add a new shared data source (myCustomList2DataSource), tell the dataset to use the new shared data source, change the information set in the parameter tab (Name => listName, Value => =myCustomList2) and test the dataset. Lucky me, it actually returned the record I entered on the first try.
B. Begin to build the report with the dataset returned
1. So, as I'm feeling good that it's actually reading the list in Step A without me threatening to destroy the machine, I look to the left in the Dataset results navigation pane in VS2005 and realize there are NO fields for me to choose to report on.
2. At this point, I have no clue what to do about getting this XML data into a report. Not that I have a large clue about SSRS otherwise, but I have at least been able to build SSRS reports when using a SQL database as the datasource. Fyi, http://msdn2.microsoft.com/en-us/library/ms159741.aspx states: "Reports can use data from XML documents and Web services, or embed XML in the query. There is no built-in support for retrieving XML documents from a SQL Server database.", in case anyone is trying to do that....
RESOLVED. Since the fields were not appearing automatically, I had started to add new fields to the dataset manually (if it doesn't work, beat it with a hammer, right?). I entered half a dozen or so fields, each one with the exact name as displayed in the query results, and then decided it would be fun to hit the refresh fields icon. As soon as I did that, all the fields shown in the query immediately appeared in the dataset and I was able to add them to a report. I don't know if I hit the refresh fields when working in issue #5, so I can't say if they are there now because of that, or because of adding some fields manually first, a combination of the two, or if it's just one of those mystery items I'm reading about with sharepoint reporting.
7. Rows are being returned even though they have NULL values (so far anyway), and most data is returning nicely for the bulk of the columns I created in the list I'm reporting on. Here are the current issues:
A. I have one column in my SharePoint list that is multi-lined text. If the text type is either rich text or enhanced rich text, the value returned in the query is formatted like this: "<div class=ExternalClassyadayada<div>My notes display here". If I set the column to be plain text, this doesn't happen. I will need to figure out how to filter that for my report.
RESOLVED. David Wise had some code listed at http://www.sharepointblogs.com/dwise/archive/2007/11/28/connecting-sql-reporting-services-to-a-sharepoint-list-redux.aspx that addressed this issue somewhat. I modified it to match my circumstances. Disclaimer: I'm not a programmer, so use this at your own risk.
function ExtractMultiLineText(myField as string) as string
dim strBegin as string
dim strEnd as string
dim myBegin as integer
dim myEnd as integer
dim myTextLength as integer
strBegin = "<div>"
strEnd = "</div>"
if myField = nothing then return ""
if myField = "" then return ""
myBegin = Instr(myField, strBegin) + Len(strBegin)
myEnd = Instr(myField, strEnd)
myTextLength = myEnd - myBegin
if myBegin < 1 then return myField
return mid(myField, myBegin, myTextLength)
end function
B. I have two columns in the SharePoint list that are set as number values with 0 decimal places. When I query those however in SSRS, they return with the number plus like 12 zeroes behind the decimal. Not a major issue, but I'll put it on the list anyway.
RESOLVED. Used the Int() function; =Int(Fields!ows_myProblemNumber)
C. If I go to "/_vti_bin/lists.asmx?op=GetListItems", it appears from the sample soap output that I am allowed to ask GetListItems for is: listName, viewName, query, viewFields, rowLimit, queryOptions and webID. As I mentioned in issue #5, according to http://www.sharepointblogs.com/dwise/archive/2007/11/28/connecting-sql-reporting-services-to-a-sharepoint-list-redux.aspx, only listName, viewName and rowLimit parameters are usable(?) and query and queryOptions may not be working properly with SSRS.
So, if I can't put anything other than this in my query string;
<Query>
<Method Namespace="http://schemas.microsoft.com/sharepoint/soap/" Name="GetListItems"/>
<SoapAction>http://schemas.microsoft.com/sharepoint/soap/GetListItems</SoapAction>
</Query>
and I only have a couple parameters to pass on top of that, then it appears to me that my options for filtering the amount of data returned from the SharePoint list is to figure out a way to do it with expressions in the parameters or in the report itself. Am I missing something? Is this really all I get to work with out-of-the-box?
More to come...
==================================
Installation steps taken to build the server VM:
==================================
(Using VirtualPC 2007)
1. Build OS (2003R2SP2) and promote to DC
1a. Create domain user service account SQLSPS
2. Prep for SQL
2a. Install ASP.NET, IIS (www) and .NET 2.0
3. Install SQL/SSRS 2005 Std
3a. Verify SSRS works
3b. RS config tool shows SP integration as blue exclamation
3c. Use service account SQLSPS for anything requiring Windows credentials
4. Install SQL2005 SP2
4a. Verify SSRS works
4b. RS config tool shows SP integration as blue exclamation
5. Prep for SharePoint
5a. Install .NET 3.0
6. Install MOSS2007 Enterprise and configure
6a. Webapps, SSP and anything else use svc acct SQLSPS
6b. Move Default website to port 8080 and re-activate (SharePoint stopped the site)
6c. Verify SSRS works on 8080
7. Install Reporting Services Add-in
8. Create new RS database in integration mode (with service credentials)
8a. RS config tool shows SP integration as red x
9. SP central admin /application management / manage integration settings
9a. reports server = http://srv1:8080/reportserver (since default port has been moved to 8080)
10. SP central admin /application management/grant database access
10a. using the FQDN, confirm servername and default instance - click OK
10b. Prompted for an account to use to retrieve information; svc acct SQLSPS did not work, domain admin did though
11. SP central admin / application management/set server defaults
11a. Accepted all defaults
12. Verify reportserver answers at http://srv1:8080/reportserver (via reportserver AppPool and DefaultAppPool)
13. Changed the application pool identity for the ReportServer AppPool from Network Service to the domain user service account I used for all SQL and SharePoint configurations (SQLSPS) and rebooted. The red x for sharepoint integration in the RS configuration tool is now a green checkmark.
I have just finished configuring my first test mirrored environment (High safety mode). I setup the database engine service accounts on each of the servers with domainuser. I inherited a production mirrored environment set up by someone else. On the production servers the database engine service account is NT Authorityuser a local account. I am trying to practice installing Windows updates within a mirrored environment and I not sure how to proceed when the service account is NT Authority user account. should I change the service account to a domainuser?
View 2 Replies View RelatedWhen I issue this command:
ALTER DATABASE foo set PARTNER = 'TCP://10.3.3.1:1234'
I get this error message:
The database is being closed before database mirroring is fully initialized. The ALTER DATABASE command failed.
What does that mean, and how do I fix it?
Hi,
View 6 Replies View RelatedIt looks like I'll be assigned with development and database management utilizing Microsoft Office Sharepoint Services and saw that there are some issues as it can become quite unwieldy.
I was wondering what difficulties to expect from MOSS and/or Sharepoint in terms of managing and backing up. Any tips or suggestions?
Hello,
I was curious if you can have merge and/or snapshot replication setup on a MS sharepoint database? Thanks.
John
I set up a new mirror server. Everything is good except that the Database Mirroring Monitor is not working for one of the databases. In the monitor the principal data is showing up as blank
If I look at dbm_monitor_data on the principal most of the data columns (e.g. Send_queue_size) are null where as they have data for the other databases.
Both servers are SQL Server 9.0.2047 Enterprise Edition.
Any idea what might be going on here?
Thanks in advance.
Hello,There's information on my Internal SharePoint DataBase that I want to access. How can I do this? Could you help me or at least point me in the right direction.The information I am requesting is just text.Thank you,Mark
View 4 Replies View RelatedWhen i try to connected to existing configuration database it's only shows NT AUTHORITYNETWORK SERVICE as my login user for database access , when i type another user , error message " you must specifay the same user account as your farm server you wish to join " how i can change it.
please help me how i can change the configuration user and password for my singel farm server
Thanks , i fixed it ??
Hi All,
Does anybody know the OS requirements for Database Mirroring? I checked BOL and Google but couldn't find any info on that.
Thanks.
Hi All,
I have read on the web that high protection mode not recommended, except in the event of replacing the existing witness server. But I can't find the reason why anywhere. Can anybody explain? Thanks.
Hi All,
Couple of questions about database mirroing.
1. Once the mirroring is setup is it possible to switch between high-protection and high-performance modes? If it is will I have to stop the mirroring, switch the modes and then restart it again?
2. Let's say the principal server went down and I manually failed over to the mirror server. Mirror server runs as a new principal server for a couple of days and then I bring the original principal server back up. What needs to be done in order to bring transactions on the principal server up to date?
Thanks.
for a database mirroring , which stretergy is good.
Creating with witness server or without it.?
I am firsttime doing this , so i am posting it to the forum..
and also if we are creating the database mirroring with witness server for automatic failover , will the witness server need the same amount of harddisk space like the pricipal or mirror server.??
thanks