Has anybody had any problems with mmc crashing when running Enterprise Manager on SQL Server 7.0/SP1? This occurs on a fairly regular basis on several of our development NT client machines (NT SP4 and SP5). We are running Version 1.1 of mmc. Is there a later version (or service pack) we need to be using?
Any comments on this would be appreciated.
Thanks
Has anybody here seen and resolved the following error?
The MS DTC Transaction Manager is in an inconsistent state and cannot proceed. Please contact Microsoft Product Support. (null)
File: . mtx.cpp, Line: 2570.
We've had this just crop up on a server over the last week. Not finding a lot.
How can I copy a SQL 7 database from one server to another? Please tell me all the ways because I've tried the obvious and it doesn't work. (backup and restore - won't go from one server to another, DTS transfer object Wizard - does a whole pile of errors and doesn't do stored proceedures and trigures). Thanks for help in advance. Also, what is the email address to post to the listserv and where is the FAQ for SQL7? Most of my listserv's tell you where to post right at the bottom of the digest I get - any chance you guys would do that with this list? Thanks again.
View 6 Replies View RelatedI am running SMS ontop of SQL 7. I keep getting these SQL dump files and cant figure out where to begin. Can somebody help and put me on the right path?
2001-07-22 12:08:55.46 spid12 Process ID 12 attempting to unlock unowned resource PAG: 7:1:507423..
2001-07-22 12:13:21.29 spid8 Error: 1203, Severity: 20, State: 1
2001-07-22 12:13:21.29 spid8 Process ID 8 attempting to unlock unowned resource PAG: 7:1:505802..
2001-07-22 15:15:48.20 spid11 Using 'sqlimage.dll' version '4.0.5'
Dump thread - spid = 11, PSS = 0x700634b4, EC = 0x216da084
Stack Dump being sent to D:MSSQL7logSQL02866.dmp
************************************************** *****************************
*
* BEGIN STACK DUMP:
* 07/22/01 15:16:00 spid 11
*
* Input Buffer 417 bytes -
* INSERT INTO Summarizers_Status (SiteCode, MessageDLL, MessageID, Status,
* Updated, GUID_ID) SELECT DISTINCT SiteCode, "SMS_RES1.DLL", 40, (SELECT
* ISNULL(MAX(x.Status), 0) FROM Summarizer_SiteSystem x WHERE x.SiteCode
* = a.SiteCode), (SELECT ISNULL(MAX(x.TimeReported), '1/1/1998 01:00') FRO
* M Summarizer_SiteSystem x WHERE x.SiteCode = a.SiteCode), "{78B42510-ABB
* D-11d1-BB12-3A84C6000000}" FROM Summarizer_SiteSystem a
*
************************************************** *****************************
-------------------------------------------------------------------------------
Short Stack Dump
0x77f67a6b Module(ntdll+7a6b) (ZwGetContextThread+b)
0x00784f83 Module(sqlservr+384f83) (utassert_fail+19f)
0x005b572c Module(sqlservr+1b572c) (ExecutionContext::Cleanup+9d)
0x004eb421 Module(sqlservr+eb421) (ExecutionContext::Purge+45)
0x004eb182 Module(sqlservr+eb182) (stopsubprocess+e5)
0x004e9d4e Module(sqlservr+e9d4e) (subproc_main+174)
0x41092a47 Module(ums+2a47) (ProcessWorkRequests+ec)
0x4109326b Module(ums+326b) (ThreadStartRoutine+138)
0x7800bee4 Module(MSVCRT+bee4) (beginthread+ce)
0x77f04ede Module(KERNEL32+4ede) (lstrcmpiW+be)
2001-07-22 15:16:01.24 kernel SQL Server Assertion: File: <proc.c>, line=1927
Failed Assertion = 'm_activeSdesList.Head () == NULL'.
2001-07-22 15:16:01.31 spid11 Using 'sqlimage.dll' version '4.0.5'
Dump thread - spid = 11, PSS = 0x700634b4, EC = 0x216da084
Stack Dump being sent to D:MSSQL7logSQL02867.dmp
Help!!!
our sql server (7.0) crashed today because it's running out of space, apparently as a result of some process(es) loading data onto it that left less than one mb of free space on the C/ drive. Most of the data and backups are on the D/ drive which has tons of free space. The swap file was on C/ but the dba moved it after today's episode. His diagnosis is that there are files being created in the server's cache that are clogging it up.
What I really need to find out if there are any temp files generated by scheduled packages that could cause this to happen? We are relatively new to executing jobs on the sql server, so this was not an anticipated situation. Essentially, this server has about 12 jobs that import and transform data from an AS/400 server onto the SQL Server every week. We've been running the jobs for about 4 months and just about 3 weeks ago I noticed a big degradation in the server's performance. Also, how can I find out which physical drive the jobs are residing on? Could anyone suggest on the best course of action please?
Irene
out if there are some sort of temp files that are generated when the scheduler executes jobs on the server.
Hi All
Last to last friday, the server crashed.We had to restart the machine to bring up the sql server.Initially we thought this as a one odd instance.This friday, almost the same time, it crashed again. By the time users complained saying they are not able to acces the application, the server froze.I was not able to see the processes running during this time.
Now I realised there is a potential problem.
I check all the logs - > SQL Server log, SQL Agent log, Event viewer.
I dont see any error messages related to this.
Since both weekends it happened at the same time, I assume that there might be some job running on the friday evening which is bringing the server down.
I checked for all the scheduled jobs and didnt find anything. So I assume this might be because of some adhoc jobs ran from the application which is causing this issue.
This have been highly escalated by the users and I have to act :mad:
I am planning to put a trace to see the happenings during this time.
Questions
1) What all parameters(in the profiler) should i take into consideration
2) Any other ways of troubleshooting the same.
3) Any whitepapers / documents to similar issues
Plz respond,my job is at stake :(
Thanks
Sree
:eek:
OK, I'm having fun here. I have 3 anonymous subscribers using merge replication all, including the server, on SQL 2000 Server SP3a.
2 of the 3 subscribers crash during the merge process, a Dr Watson error log comes up saying that the replmerg.exe has died.
I have checked for orphaned processes of the same name to no avail. Just in case I made a mistake, I rebooted the server to ensure that any orhpaned processes were killed. No Joy.
Does anyone have any idea what this would happen?
Hello,
I am trying to programatically create an SQL Server destination in SSIS. I am creating the connection string, then initiating a connection, and then call AcquireConnections(nothing).
When running in debug mode or in command line, all works perfect. However, when running from within a Windows Service, I get the following exception:
System.Runtime.InteropServices.COMException (0xC020801C): Exception from HRESULT: 0xC020801C at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.AcquireConnections(Object pTransaction) at ...
Any ideas ?
Thanks,
Hanan.
All of a sudden one of my projects/packages seems to have encountered a strange problem. First I tried to remove a data viewer which caused BIDS to crash and tell me that VS has encountered a problem and needs to close. This is repeatable every time I try to remove the data viewer or the link or the transforms or the entire data flow. How do I get around this besides starting from scratch and how do I figure out why this is happening and is there some fix?
thanks
John
Please direct me to detailed causes of SQL server crashing after a 17805 Invalid Buffer Received From Client. Our production server goes down, following this msg.
We applied service pack 5a, and it is still crashing. It crashes using either NAMED PIPES or TCP/IP protocol (via ODBC) The driver versions are older, ODBC 3.0 and SQL Server 2.65, respectively.
I need some direction on this. I'm leaning towards the possibility that this is an application problem.
Any help, any configuration setting changes, upgrades, workarounds, will be accepted. Thank you much!
Dear Folks:
I am currently engaged in finding the reason why a certain SQL client application (now running under XP SP2) fails when it attempts to query an sql database. This "failure" happens after the nth operation of the same. The application can run anywhere between 2 seconds and 2 hours before it displays a GPF dialog window and is terminated by the user. The application was developed more than 10 years ago using Borland c++ 4.52 (I am using 5.01) and was deployed as a 16 bit windows app. Since then, they've the client) "apparently" had some success running it under Win95/Win98 and 32 bit OSs like W2K and XP.
At this time, I (think I) know that a specific query operation (runing through the KDBF framework) that returns a 13059 BDE code before the returned object is accessed and the KERNAL reports a NULL Handle error. Inside the KBDEF framework, the query function translates to a DbiQExecDirect(,,) function call to the BDE. I have looked at the code and can not find anything wrong.. nor would i expect too. The application worked at one time. But,clearly, something has changed in the environment of both the test system I have, and one installed at a customer site. I have modifed just about every modifiable parameter I can think of. The system in question is an IBM branded machine running XP pro with SP2 applied. I do not know if the app run under XP SP1 correctly, however.
Any suggestions would be greatly appreciated. (i know.. stop using BDE)
Thank you
JRC
I have two datasets, each of which are pretty much exactly alike. Each
dataset has a corresponding matrix on the report and thats all there is.
When I run each query they work fine but when i preview the report I get the
following:
An error occurred during local report processing. An internal error occurred
on the report server. See the error log for more details.
My query is as follows:
SELECT dbo.SR_Service.SR_Service_RecID,
CASE WHEN sr_type.description LIKE 'Internal' THEN sr_service_recid END AS
internal,
CASE WHEN sr_type.description LIKE 'Incident' OR
sr_type.description LIKE 'scheduled maintenance' OR
sr_type.description LIKE 'support email' THEN
sr_service_recid END AS incident,
CASE WHEN sr_type.description LIKE 'projects' THEN sr_service_recid END AS
project,
(SELECT period FROM TE_Period WHERE (CONVERT(varchar(10),SR_Service.
Date_Entered,101) BETWEEN TE_Period.Date_Start AND TE_Period.Date_End) AND
TE_Period_Setup_RecID =106) AS period
FROM dbo.SR_Service INNER JOIN
dbo.SR_Type ON dbo.SR_Service.SR_Type_RecID = dbo.
SR_Type.SR_Type_RecID
WHERE (DATEPART(yyyy, dbo.SR_Service.Date_Entered) = '2006')
ORDER BY period
I am able to run all the other reports I have created, including those with
subquerys.
What the heck could be making Reporting Services crash? Where can I even
find the error log?
I have a mobile application that uses a sql mobile database.
The problem I am encountering is that when I created a data adapter and execute the update command of the dataadapter the application crashes.
This is the third form in the application, the other forms also have code that interacts with the database and everything works up to this update command. I have tried the update command manually using SQL Management Studio and it runs without problems.
I am using the a database Provider Factory to allow me to choose between using the Mobile Database or the SQL Server Database. When I run the code using the SQL Server Database it will run without any problems.
The line of code that causes it to crash is located inside a TRY/CATCH block, but it doesn't catch the error. The application simple crashes and ends. I get an Error Report that has the following information.
Here is the part of the code that is causing the problem:
Code Snippet
Dim myAdapter As IDbDataAdapter = pf.CreateDataAdapter()
myAdapter.UpdateCommand = pf.CreateCommand()
myAdapter.UpdateCommand.Connection = cn
myAdapter.UpdateCommand.CommandType = CommandType.Text
myAdapter.UpdateCommand.CommandText = updateCmd
Try
myAdapter.UpdateCommand.ExecuteNonQuery()
Catch err As Exception
MessageBox.Show("An error occurred - " & err.Message)
Finally
cn.Close()
End Try
Bucket Parameters:
EvntType: WinCE501bException
AppName: ltc.exe
AppVer: 5.1.0.0
AppStamp: 48248053
ModName: sqlceqp30.dll
ModVer: 3.0.5300.0
ModStamp: 458ac2af
Any help will be greatly appreciated.
I have an application which is providing printing facility using a custom hardware interface device.
Whenever a print is required user punches in his ID number into the hardware device, and hence an underlying application gets the event and it calls a managed DLL, which inturn calls the Reporting services webservice on the same server. Problem starts after some days (typically after 2 -3 days), when the server response becomes slow and the aspnet_wp.exe restarts every now and then and after this sequence of happening, finally it crashes with some event in application in event log which reads:
The server was unable to allocate from the system nonpaged
pool because the pool was empty.
Also many times the applications log file reads :
There is an error in XML document (1, 948).
I think this error starts when the aspnet_wp.exe is restarting, but I am not sure.
The server operating system is Windows 2000 SP-4, MS SQL Server 2000 Standard Edition SP-4, MS Reporting Services 2000 Standard SP-2 with .Net Framework v1.1
The Server is running many applications apart from the ones listed above and there is a moderate usage of TCP/IP sockets for communicating with certain hardware devices.
Please help me out!
I have a program that works perfectly...until it crashes. It basically logs info into a SqlCE local file database. After a random time (15 seconds to ~5 minutes) it crashes with the following exception. I cannot find much correleation in the code I've written, except that it seems to crash less often in debug mode...
-- Context: SqlProvider(SqlCE) Model: AttributedMetaModel Build: 3.5.20706.1
System.Transactions Critical: 0 :
<TraceRecord xmlns="http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord" Severity="Critical">
<TraceIdentifier>http://msdn.microsoft.com/TraceCodes/System/ActivityTracing/2004/07/Reliability/Exception/Unhandled</TraceIdentifier>
<Description>Unhandled exception</Description>
<Exception>
<ExceptionType>System.AccessViolationException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType>
<Message>Attempted to read or write protected memory. This is often an indication that other memory is corrupt.</Message>
<StackTrace>
at System.Data.SqlServerCe.NativeMethods.SafeRelease(IntPtr&amp; ppUnknown)
at System.Data.SqlServerCe.SqlCeCommand.ReleaseNativeInterfaces()
at System.Data.SqlServerCe.SqlCeCommand.Dispose(Boolean disposing)
at System.Data.SqlServerCe.SqlCeCommand.Finalize()
</StackTrace>
</Exception></TraceRecord>
Hi
We're having trouble with Enterprise manager when trying to view views or table data/properties, we get an access violation error and the database crashes sometimes corrupting tables.
Ive seen some posts stating a post SP3 for SQL Server is required and some posts saying client access should be modfied.
However our enterprise manager clients are registered with SA so I dont think that is an issue.
Can anyone give me some help with this and/or direct me to the hotfix please.
Cheers
Louise
I got a server that Crashed. My network group was able to get it up and running but it's vary fragile. One of the disk is done. What's the best way to get the my database:tables,views,stored procedured,dts packages, jobs off the bad server without crashing it again? I used the databae copy utility but found out that some of the database are replicated and it wont allow it to copy.
Thanks
Just another day in the life of a dba
i have my SQL server 2005 crashing when Events log is full
I have a hacker attacking my DB with a brut force tool but whereas he does not have the password, event log registers his access attempts as Failure Audit.
I have thousands of lines of "Failure Audit" in my event log
The event logs are set to be overwritten automatically when they reach 16Mb but it's not working correctly, they r not overwriting their content.
in SQL 2005 ERRORLOG file i see:
2007-05-14 01:57:11.57 spid80 Error: 17054, Severity: 16, State: 1.
2007-05-14 01:57:11.57 spid80 The current event was not reported to the Windows Events log. Operating system error = 1502(The event log file is full.). You may need to clear the Windows Events log if it is full.
SQL Agent cannot starts because it's not able to write in the event log that it's starting and when it cannot write in event log, it does not start and my sql server crashed
My Question is simply how to fix this issue once for all
After an error trying to connect to a database, I am trying to query the number of status records using SQLGetDiagField() and am getting an access violation? I am trying to open a connection to data in an Excel file using the Excel ODBC driver. Any hints?
View 1 Replies View RelatedI had the following erroneous code in a SQL Server stored C# procedure:
class P
{
private DateTime? e;
public P(
DateTime? e)
{
this.e= e;
}
public DateTime? E
{
get
{
return E; // correction return e;
}
set
{
E= value; // correction e = value;
}
}
}
Calling the getter of E of the class P creates an infinite number of method calls. This causes the .NET stack overflow. This sometimes caused our SQL crash. Here's the log:
29.3.2007 9:46:08 A fatal error occurred in .NET Framework runtime. The server is shutting down.
29.3.2007 9:46:10 Microsoft SQL Server 2005 - 9.00.2153.00 (X64)
May 9 2006 13:58:37
Copyright (c) 1988-2005 Microsoft Corporation
In my opinion an error in SQL server CLR stored procedure must not be able to crash the whole SQL Server, as it seems to do. Could someone verify this?
What makes finding problems like this problematic is that the only error is like ".NET stack overflow". No pointer to where in the code the error occured. It took hours for me to find the problem
Clearly, my code isn't written as well as it should be. I don't understand enough about data access and could use some help.I have several database tables, but one primary table that is the most accessed. Generally, I need to build a list from the data based on some filter. I'm using a repeater control, since all I need to display per record is a name, maybe a city or birthday, and possibly a little graphic, and my customer doesn't want a grid type of display. The filter is determined by the page requested. The exception is a search page where the user builds the filter and a grid is used to display the results.The results always contain a link to a page that has more detail on the selected record. What is the best way to handle this? I'm still trying to get a handle on different ways to get data and I'm not doing much with caching. Would it make sense to keep the data in memory from the page that displays the list (or search page) to the detail page? What if the detail page is accessed directly, say from a bookmark? How do I cache this?I'm currently using strongly typed datasets.Below is an example of what I'm doing - this is from the code behind of one of the list pages - members with birthdays this month. Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Dim theMonth As String = DateTime.Now.ToString("MMMM") Me.LabelMonth.Text = theMonth Dim MemberAdapter As New WAPTableAdapters.membersTableAdapter Repeater1.DataSource = MemberAdapter.GetBirthday("Female", DatePart("m", Today)) Repeater1.DataBind() Repeater2.DataSource = MemberAdapter.GetBirthday("Male", DatePart("m", Today)) Repeater2.DataBind() End Sub Protected Sub Repeater1_ItemDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.RepeaterItemEventArgs) Handles Repeater1.ItemDataBound If e.Item.ItemType = ListItemType.Item OrElse e.Item.ItemType = ListItemType.AlternatingItem Then Dim LabelIcon As Label = CType(e.Item.FindControl("LabelIcon"), Label) Dim person As WAP.membersRow = CType(CType(e.Item.DataItem, System.Data.DataRowView).Row, WAP.membersRow) If System.IO.File.Exists(Server.MapPath("~/images/picts/" & person.FILE2 & ".jpg")) Then LabelIcon.Visible = True End If End If End Sub Protected Sub Repeater2_ItemDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.RepeaterItemEventArgs) Handles Repeater2.ItemDataBound If e.Item.ItemType = ListItemType.Item OrElse e.Item.ItemType = ListItemType.AlternatingItem Then Dim LabelIcon As Label = CType(e.Item.FindControl("LabelIcon"), Label) Dim person As WAP.membersRow = CType(CType(e.Item.DataItem, System.Data.DataRowView).Row, WAP.membersRow) If System.IO.File.Exists(Server.MapPath("~/images/picts/" & person.FILE2 & ".jpg")) Then LabelIcon.Visible = True End If End If End Sub It seems pretty simple and straightforward to me, but these pages shouldn't be crashing when the site gets busy, so I have to be doing something wrong. Diane
View 5 Replies View RelatedI've installed the client tools on my notebook, and EM normally works properly. However, sometimes Enterprise Manager will crash on me for no obvious reason(it generates errors, but this takes forever, so i kill it). It is not consistent, nor can I reproduce the error, but it happens about once a day, never at the same time. Anyone else see this? My pc has win2K professional on it.
View 1 Replies View RelatedI just recently replaced my old HP laptop with a Sony VAIO. I installed all of my development software on it, including SQL Server 2005 and the studio. At some point when I am using the studio on this new laptop, if I try to resize any of the columns to better fit the data, it crashes my laptop. I get the infamous Blue Screen of Death.
The laptop is a Sony Vaio BX670P and it has Win XP SP2 with all of the latest and greatest updates loaded on it.
The BSD blames a driver for causing the crash and points out "win32k.exe" specifically. This has never happened to me before.
Does anyone know why this might be happening?
- - - -
- Will -
- - - -
http://www.strohlsitedesign.com
Hi,
I've been running SQL2000 for the past few years with 2gb of RAM and just recently upgraded to SQL2005 with 4 gigs.
My old system would always have the sqlservr.exe process using as much RAM as it could, this number would never really drop, maybe if it did it was in the single digit percentages.
I was just setting up new maintenance plans on my server, and I noticed from the time I started to the time I finished the SQLSERVR.EXE process dropped from using 3.5gb of RAM to just 1.5GB of RAM right now. It's pretty steadily going up too.
Does sql2005 have some new advanced memory management features? Did creating a sql maintenance plan release some memory? Did sqlserver crash ? I've never seen this before.
Thanks very much! :)
mike123
Here is my dilema. I have a 120 GB database that I need to mask customercredit card numbers in. The field is a varchar (16). I need to updatethe field so that we only store the first 4 numbers and the last 4numbers of the credit card and insert * to fill in the rest of thecredit card number.I was going to do this as a loop using the following code:While Exists (Select Top 10 * From Header Where IsNumeric(CCNbr) = 1)BeginBegin Transaction T1UpdateHeaderSetHeader.CCNbr = Left (D1.CCNbr, 4) + '********' + Right (D1.CCNbr, 4)From(Select Top 10 * From Header Where IsNumeric(CCNbr) = 1) as D1Commit Transaction T1If Not Exists(Select Top 10 * From Header Where IsNumeric(CCNbr) = 1)BreakElseContinueEndIn theory this only selects the top 10 rows, updates them, dumps the logand moves on to the next 10 until all the rows are updated.I tried running this on my test database and it fills up the transactionlog.Can anyone tell me the best way to go about doing what I need?Thanks*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies View RelatedWe are using MS Excel 2007 Pivot tables to access en SSAS 2005 Cube. Farly often when we reopen an excel spreadsheet with one or more pivot tables we get an error like this:
Excel found unreadable Content. Do you wish to repair
When we click yes the following log is shown:
Removed Feature: PivotTable report from /xl/pivotCache/pivotCacheDefinition1.xml part (PivotTable cache)
Removed Feature: PivotTable report from /xl/pivotCache/pivotCacheDefinition2.xml part (PivotTable cache)
Removed Feature: PivotTable report from /xl/pivotTables/pivotTable1.xml part (PivotTable view)
Removed Feature: PivotTable report from /xl/pivotTables/pivotTable2.xml part (PivotTable view)
Removed Records: Workbook properties from /xl/workbook.xml part (Workbook)
And all the pivot tables are converted to plain text.
I have read about this in KB 929766 but this do not apply since KPIs are not used.
The KB 943088 is more interesting but after upgrading all user with SP 1 the problem is still there, mostly when we open old excel-files that has been created without SP 1 but opened and saved once with SP 1. After that we are not able to open them at all, either with or without SP 1 installed.
Is there some way to €œsave€? pivot tables from destruction? I can€™t ask the users to rebuild all there spreadsheets that have been created prior SP1. What will happen when there is a new SP for Excel? Rebuild all spreadsheets and pivot tables again?
Hi,
I'm having an issue with reporting services installed on a Win2000 machine.
I was able to install RS successfully on the server. Everything worked fine, but when I try to deploy a project, SS BIDS keeps asking for a valid password, no matter if I enter any valid password or not. After that if I try to access reporting service, the web interface says:
€œThe report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError) Get Online Help €?
In order to get it back working I have to go to Reporting Services Configuration Manager and mark €œApply default settings€? in Report Server Virtual Directory and Report Manager Virtual Directory.
It is worth to say that no matter what project I try to deploy, it is always the same behavior, and that no error log is generated either in event viewer or in the reporting services log directory.
Any idea what is happening?
Regards,
Germán.
I am using reporting services 2000 already for 2 years. This problem is occurring on 2-3 reports, I can't say exactly what is the reason.
How I use the report designer is pretty simple and consistent. Report data is usualy produced by calling a stored procedure (on SLQ server 2000), I have a few parameters. Some of Paramaters are dates with a default values calculated to give yesterday's date or today - 7 days. And that is the only code in the report itselft. As soon as I click on Yes/No paramater, that doesn't have default, and is int in proc and report, then complete Visual Studio Environment starts flashing, making bip-bip noise, and is blocked, no access and reponse. I can't close it for a while, I can't bring up task manager, and in general this crash is very much resource intensive, Outlook is freezing, can't open IE, new spreadsheet. I am working on windows Xp platform. Eventually I would manage to close VS thru task manager.
As soon as this report is uploaded to Report Manager, the place where all the reports are available to users, on different server, the same report works fine.
Has anyone experienced this and what would be the reason.
Thanks in advance,
Elizabeta R
Hi,I'm accessing a pair of databases with ASP/ADO,and using stored procedures on the first access.The first access works OK - everything gets writtento where it's supposed to be.On attempting to write to a pair of database tablesin the second database (second access attempt),the server crashes, as does the app, and I get the following error:--------------------------------------------------------------------Server Error in '/Webfolder01' Application.Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Data.SqlClient.SqlException: A transport-level error has occurred when receiving results from the server. (provider: Shared Memory Provider, error: 0 - The pipe has been ended.)--------------------------------------------------------------------After this, I have to go into the services panel and restart SQL 2005.This doesn't happen if I use small test data sets in the first access,and I can comment out the second access attempt, and the first accessexecutes just fine with both the large and small data sets,so I'm thinking that this has something to do with synchronisation:Perhaps the second attempt is being made before the server is ready.Is there something that I need to do to make certain that SQL 2005is ready to receive data?I'm using SqlBulkCopy with both accesses, but I don't see how thatcould be a problem.--------------------------------------------------------------------[SqlException (0x80131904): A transport-level error has occurred when receiving results from the server. (provider: Shared Memory Provider, error: 0 - The pipe has been ended.)] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +857370 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734982 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) +556 System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) +164 System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected) +34 System.Data.SqlClient.TdsParserStateObject.ReadBuffer() +30 System.Data.SqlClient.TdsParserStateObject.ReadByte() +17 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +59 System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal() +1327 System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer (Int32 columnCount) +916 System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState) +176 System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table) +6 Database_control.DB_ctrl_class.load_datatable_to_DB_table(DB_ref_class src_table) in i:Virtual WebfoldersDBctrl.cs:978--------------------------------------------------------------------THANK YOU VERY MUCH!!!
View 4 Replies View Relatedhopefully, the subject addresses my problem. the server is running like a charm.
Service pack 2 has been installed. The only connection I remember creating after the initial installation is a remote connection.
I've checked to make sure I am allowing multiple protocols.
I am not able to get a response from the following:
C:Usersamfrizzell>SQLCmd -S .aaron-toshiba -E -Q "SELECT @@Version"
HResult 0xFFFFFFFF, Level 16, State 1
SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establi
shing a connection to the server. When connecting to SQL Server 2005, this failu
re may be caused by the fact that under the default settings SQL Server does not
allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
The instance is running as I can connect to it through Visual Studio 2005.
What did I do wrong? I could really use this application in order for me to develop websites. It's sort of a pain to go to another computer to use the more powerful features of SQL Server 2005 Server management Studio (standard edition).
Help me... somebody please help me.
Thanks.
Aaron
Kind of a weird problem. Just migrated some Access tables to SQL 2005 backend. This is only happening on one users machine, WinXP and Access 2003 with the linked tables to SQL 2005. When they try to run a query that has a date criteria, Access will crash. Any other type of criteria, the query works fine. Things I have tried:
1) Installing Office Service Pack 3
2) Repairing Office 2003
Thanks.
I'm having many many issues installing sql server management tools. i had visual studio 2005 installed first, but uninstalled and sql related things before trying to install sql server management tools again - i also deleted the program files/microsoft sql server/ folder so there are no references.
Firstly the system configuration check gives me a warning that the system doesn't meet the recommended hardware requirements - this is wrong... i've got 2.33Ghz dual core + 1gb of ram...
I select just management tools + client connectivity to install and click next -> the setup support files/native client/owc11 etc all install fine but workstation components etc fail and the setup log appears to either be empty and not available
and MSXML6 fails... after clicking finish the installer appears to crash - : "Microsoft SQL Server 2005 Setup has encountered a problem and needs to close. We are sorry for the inconvenience"... I have tried all sorts of variations on this install and have had no problems in the past - please help!
The setup log from the MSXML6 failure -
=== Verbose logging started: 18/03/2008 12:34:09 Build type: SHIP UNICODE 3.01.4000.4039 Calling process: C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (5C:78) [12:34:09:067]: Resetting cached policy values
MSI (c) (5C:78) [12:34:09:067]: Machine policy value 'Debug' is 0
MSI (c) (5C:78) [12:34:09:067]: ******* RunEngine:
******* Product: {AEB9948B-4FF2-47C9-990E-47014492A0FE}
******* Action:
******* CommandLine: **********
MSI (c) (5C:78) [12:34:09:067]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (5C:78) [12:34:09:067]: Grabbed execution mutex.
MSI (c) (5C:78) [12:34:09:067]: Cloaking enabled.
MSI (c) (5C:78) [12:34:09:067]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (5C:78) [12:34:09:067]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (28:E4) [12:34:09:113]: Grabbed execution mutex.
MSI (s) (28:74) [12:34:09:113]: Resetting cached policy values
MSI (s) (28:74) [12:34:09:113]: Machine policy value 'Debug' is 0
MSI (s) (28:74) [12:34:09:113]: ******* RunEngine:
******* Product: {AEB9948B-4FF2-47C9-990E-47014492A0FE}
******* Action:
******* CommandLine: **********
MSI (s) (28:74) [12:34:09:113]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (28:74) [12:34:09:113]: MainEngineThread is returning 1605
MSI (c) (5C:78) [12:34:09:113]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (5C:78) [12:34:09:113]: MainEngineThread is returning 1605
=== Verbose logging stopped: 18/03/2008 12:34:09 ===
The log summary:
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Tue Mar 18 12:05:06 2008
EOC429 : The current system does not meet recommended hardware requirements for this SQL Server release. For detailed hardware requirements, see the readme file or SQL Server Books Online.
Machine : EOC429
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : EOC429
Product : Microsoft SQL Server Native Client
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : EOC429
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_OWC11_1.log
--------------------------------------------------------------------------------
Machine : EOC429
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_BackwardsCompat_1.log
--------------------------------------------------------------------------------
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.
Time : Tue Mar 18 12:19:20 2008
List of log files:
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_Core(Local).log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_SQLSupport_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_SQLNCLI_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_OWC11_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_BackwardsCompat_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_MSXML6_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_Datastore.xml
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_.NET Framework 2.0.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_Core.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_.NET Framework 2.0 LangPack.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_.NET Framework Upgrade Advisor.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_.NET Framework Upgrade Advisor LangPack.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_.NET Framework Windows Installer.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_.NET Framework Windows Installer LangPack.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_SNAC.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_Support.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_SCC.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_EOC429_WI.log
I created an ODBC to Lotus notes server and database. Â This ODBC connection works, however, when I put the ODBC into SSIS and test the connection my visual studio 2010 crashes and has to restart. Â Is there a fix I am missing on my VS2010? Â Or am I doing something wrong in my SSIS project?
View 2 Replies View Related