I make PROCEDURE to send email useing db msdb and this PROCEDURE dbo.sp_send_dbmail like this
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'saly',
@recipients = @email,
@subject = @subject,
@body = @body;
Go
And when EXEC it gives me mail qeue
and mail don't arrive where it goes i don't know please tell me what error
thankx very much
Hi There,
I'm having a little trouble with a large query I have written to be sent as an email.
I want to send it as a csv so I've added commas in between each value in the query.
This is causing an error though, I think the ' that surround the commas are closing the query early. Is there any way around this? like encapsulating the query?
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'ggsgn'
,@recipients = 'sgsdm'
,@subject = 'Nsgdday'
,@attach_query_result_as_file = 1
,@body_format = 'text'
,@query ='
use sdgsgdgs
select
a1.c#,',', client,',', fr,',', tpe,',', dateReq as DateRequested,',', ... '
Whenever I start my SQL Express 2005 database, I get the following in the logs :
View 10 Replies View RelatedI'm getting the following output from dbcc checktable(sysdtssteplog):
Msg 8928, Level 16, State 1, Line 2
Object ID 594101157, index ID 0: Page (1:744) could not be processed. See other errors for details.
Msg 8939, Level 16, State 98, Line 2
Table error: Object ID 594101157, index ID 0, page (1:744). Test (IS_ON (BUF_IOERR, bp->bstat) &&bp->berrcode) failed. Values are 2057 and -1.
Msg 8976, Level 16, State 1, Line 2
Table error: Object ID 594101157, index ID 1. Page (1:744) was not seen in the scan although its parent (1:4660) and previous (1:607) refer to it. Check any previous errors.
Msg 8978, Level 16, State 1, Line 2
Table error: Object ID 594101157, index ID 1. Page (1:745) is missing a reference from previous page (1:744). Possible chain linkage problem.
CHECKTABLE found 0 allocation errors and 4 consistency errors in table 'sysdtssteplog' (object ID 594101157).
repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKTABLE (msdb.dbo.sysdtssteplog ).
Is this a DTS package or log file I can just remove, or can I just somehow remove that data from the table? I ask this because all the DTS packages seem to be running (and logging) fine.
Or will this involve restore and replace? What direction should I go from here?
I have not seen any hardware errors on this machine. Yet.
Thanks for any and all help.
When I try import a SSIS package into the MSDB I get the following error message:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
The SQL server specified in SSIS service configuration is not present or is not available. This might occur when there is no default instance of SQL Server on the computer. For more information, see the topic "Configuring the Integration Services Service" in Server 2005 Books Online.
The .Net Framework OleDb Data Provider requires Microsoft Data Access Components(MDAC) version 2.6 or later. Version 2.12.4202.3 was found currently installed. (MsDtsSrvr)
------------------------------
BUTTONS:
OK
------------------------------
I do have default instance installed and the SSIS servie is running. When I look at the SSIS service configuration it shows a period for the server which I thought meant local host. Also I have MDAC 2.8 installed. What else do I need to look at?
Has anyone ever seen fatal error 1109, I cannot find any info on it. Also, our msdb was either corrupted at a clients site or someone deleted it and tried to recreate it to cover themselves....any how...all of the stored procedures are missing from it and it will not let us back up data or schedule tasks...do I need to re-install SQL Server 6.5 to fix this?
Thank you.
Hi All
View 4 Replies View RelatedI've just installed sql 2005x64 and sp2 on a active/passive cluster on 2003. Everything is working fine except browsing the stored msdb packages in SSIS. Remote acces is enabled - as are named pipes. I've tried doing this on the local server as well. I was able to create a maintenance plan and run it with no problems.
We got an error during the install pertaining to SSIS, but hit ignore and it went on successfully.
It was - failed to install and configure assemblies .....MSMQTask.dll in the com+ catalog. Error -2147467259.
description: Error HRESULT E_FAIL has been returned from a call to a COM component.
The browsing error is below.
Thanks!
Sam
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
The SQL server specified in SSIS service configuration is not present or is not available. This might occur when there is no default instance of SQL Server on the computer. For more information, see the topic "Configuring the Integration Services Service" in Server 2005 Books Online.
Login timeout expired
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
Named Pipes Provider: Could not open a connection to SQL Server [2]. (MsDtsSrvr)
------------------------------
BUTTONS:
OK
------------------------------
Hi all,
I get this error when trying to open folder MSDB in management studio.
I'm running Win 2003, SQL server 2005 64 bit on AMD with two instances of SQL.
Any one that have a solution ? I havent found any thing that works.
If I enable VIA in SQL Server I can't start SQL Service
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
Login timeout expired
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
VIA Provider: The specified module could not be found. (Microsoft SQL Native Client)
------------------------------
Login timeout expired
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
VIA Provider: The specified module could not be found. (Microsoft SQL Native Client)
Hi,
When I am trying to drop a user using following statement
--First remove access from all databases
Set @SQL =
'
USE [?];
if ''' + @login_name + ''' in (Select name from sysusers )
EXEC [?].dbo.sp_revokedbaccess @name_in_db = N''' + @login_name + ''';
'
Exec sp_msforeachdb @SQL
Print 'Access Removed.'
exec @ret_value=master.dbo.sp_droplogin @login_name
I am getting an error,
User has been dropped from current database.
User has been dropped from current database.
Access Removed.
No permission to access database 'model'.
Server: Msg 229, Level 14, State 5, Line 1
SELECT permission denied on object 'sysjobs', database 'msdb', owner 'dbo'.
Login dropped.
The SQL Version I am using is
-------------------------------------------
Microsoft SQL Server 2000 - 8.00.2039 (Intel X86)
May 3 2005 23:18:38
Copyright (c) 1988-2003 Microsoft Corporation
Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
Please help me to solve this issue.
Mujeeb.
Hi,
I currently have SQL2005 Std, using 2 separate domain accounts for both SQL server and SQL agent. When accessing the MSDB stored packages folder from mgmt studio, I get the following error:
Client unable to establish connection.
Encryption not supported on SQL server.
I did google for this error, but have tried all suggestions, including updating the MsDtsSvr.ini.xml file with the servername. I am using a default instance.
Also, I am only able to access the MSDB folder if I set the SQL service account to the local admin account. I have also set the SQL service account to be part of the local admins group, but without any luck.
TIA.
When using "sp_send_dbmail", messages are queued through Service Broker. Other than the system views, "dbo.sysmail_...", in MSDB, is there another way to know if an email was sent successfully?
Also, in 2000 you did not need to supply the whole email address in order for xp_sendmail to work. For example, I could use my name, "RGioia" as the recipient and it would send email to rgioia@<my current domain>. Does anyone know of a work-around for this in 2005 or do you just have to ensure that full email addresses are used?
Thanks in advance!!
I wrote a trigger as follows:
CREATE TRIGGER TR_ABC
ON TABLE_A
AFTER INSERT
AS
DECLARE @E_MAIL VARCHAR(255),
@MESSAGE VARCHAR(255)
SET @MESSAGE = 'A new call request has been logged'
SELECT @E_MAIL = E_MAIL
FROM TABLE_A AS A
LEFT OUTER JOIN TABLE_B AS B
ON B.SYSADMIN = A.SYSADMIN
WHERE SYS_ADMIN = 1
EXEC MSDB.DBO.SP_SEND_DBMAIL
@profile_name = 'SCINFO',
@recipients = @E_MAIL,
@body = @MESSAGE,
@subject = 'SCI Service Request';
The problem is everytime I insert data into the table I get an error stating that-:
'At least one of the following parameters must be specified. "@recipients, @copy_recipients, @blind_copy_recipients".
Mail queued.'
Please help.
SQL Server 2005Help. I have a problem:On a 2000 box, I am calling the sp_send_dbmail stored procedure on a2005 box (they are linked servers).This is how I'm calling the proc (from the 2000 box), which usessp_send_dbmail to send the mail.EXEC My2005Server.DatabaseName.dbo.SendNotification@recipients = 'me@yahoo.com',@subject = 'SENDING @TOTAL,@body = @text1 + @text2 + @text3 + @text4 + @text5@text1 - @text5 are varchar(8000).As you can see I'm trying to take advantage of the varchar(max) that@body allows.However, I get this error:Server: Msg 170, Level 15, State 1, Line 22Line 22: Incorrect syntax near '+'.I need to be able to concatenate these somehow... as I cannot put theminto one large variable from the 2000 server side.Can you see the problem here?Help.Thanks
View 1 Replies View RelatedHello all,
I'm new to this forum and have the same question on SQLTeam.com, where I'm a frequent forum user.
I'm trying to send the results of a table to a group of people by email, see code used below:
exec msdb.dbo.sp_send_dbmail @profile_name = 'DT', @recipients = 'isantos@foo.net;', @subject = 'QA Results', @body = 'Some Text', @query = 'select * from [db].[dbo].[table]', @execute_query_database = 'db', @exclude_query_output = 1, @append_query_error = 1;
Error message I get by email:
Msg 15404, Level 16, State 19, Server TAKKARA, Line 1 Could not obtain information about Windows NT group/user 'WECLICKisantos', error code 0x5.
If I remove the @query, @exclude_query_output and @append_query_error options, I can send the email without a problem, just whenever I try to add a query to it that it gives me this error message.
I'm a sysadmin, I can run that query, I have access to the DatabaseMailUserRole under msdb and the profile that I'm using is public... I'm kind of stuck, let me know if you can help.
I'm running the following test
declare @dbccdate varchar(60)
set @dbccDate='dbcc east' + convert(varchar(60),getdate(),10)
exec msdb.dbo.sp_send_dbmail
@recipeints='human@gmail.com',
@body = 'This is a test'
@subject= @dbccdate ,
@query='dbcc checkdb (msdb)',
@attach_query_result_as_file=1,
@query_attachment_filename='Dbcc_MSDB_Results.txt'
This works fine but, I'd really like the subject to contain the line
"Checkdb found 0 errors..." So mgmt doesn't have to open the txt file to view the results.
I've tried dumping the results to a txt file first. Then trying to read the text file for the line inquestion. I wrote a for loop to parse the results command line, but can't figure how to add that value to the subject.
The script is this:
for /f %i in ('findstr /B /I "CHECKDB" y:dbcclogmsdblog.txt') do echo %i
Is there anyway to do this?
Have a funny one that I've not yet resolved, and was wondering if I am the only one.
SQL2005 SP1 server, Ent Ed, 64 bit, clustered machine.
SP2a installed over Easter weekend.
about 12 days after apparently succesful upgrade, the cluster was failed over. After that fail-over, an existing job started failing, with the following message:
quote:Error executing extended stored procedure: Invalid Parameter [SQLSTATE 42000] (Error 22050). The step failed.
All the job does is build a SQL query, then supply the query to sp_send_dbmail for execution:
DECLARE
@RetCodebit,
@Tovarchar(200),
@Subjectvarchar(100),
@CCvarchar(200),
@Queryvarchar(max),
@Debugsmallint
--cut section that has the query , but these are straight SQL
--queries - no SP or XP usage whatsoever
EXEC@RetCode = msdb.dbo.sp_send_dbmail
@profile_name= 'Email',
@recipients= @To,
@subject= @Subject,
@copy_recipients= @CC,
@query_result_header=0,
@Query=@Query
One 'funny' I noticed is that up until the failover, SSMS seemed to erport the version of the server as still the SP1 (2157). After failover, it now lists (3042). This may simply be a symptom of SSMS not auto-refreshing though. We have (I believe) failed back again since then, still no joy.
Any Ideas?
*##* *##* *##* *##*
Chaos, Disorder and Panic ... my work is done here!
I am trying to use the sp_send_dbmail sproc but I get the following error:
Msg 22051, Level 16, State 1, Line 0
Attachment file C: est.txt is invalid.
My code:
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'SQL Server Mail Profile blah blah',
@recipients = 'myEmail@somewhere.com,
@body = 'Hello World',
@subject = 'Hello World',
@file_attachments = N'C: est.txt'
why would that be? The test.txt file does exist on my drive!
Please advise.
I have a table which contains a list of addresses to send an email to. I'd like to be able to do something like:
update emaillist
set sendcount = SendMyMessage( emailaddress )
where sendcount = 0
In this case SendMyMessage is a user defined function which calls the sp_send_dbmail stored procedure.
However, I am receiving an error saying "Only functions and extended stored procedures can be executed from within a function"
From what I've seen, it sounds like I am forced to use a cursor to go through my email list table. Is that the only way?
Under SQL 2000, using a user defined function to call CDONTS was a no brainer....
Thanks,
Chris.
I just started getting these errors on a few (not all) servers the other day. These servers have been running fine for a few months now...
Msg 14661, Level 16, State 1, Procedure sp_send_dbmail, Line 476
Query execution failed: Error initializing COM
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
I can only find one thread regarding this error, specifically with dbmail and I am doing the same thing (executing a query and attaching the results).
http://www.sqlservercentral.com/forums/shwmessage.aspx?forumid=149&messageid=248650
This thread points to a KB article http://support.microsoft.com/kb/910416 which is close except for the fact that these were not upgrades, but clean installs. I'm leary of applying the hotfix to my servers.
Is this a known issue internal to MS and is the referenced hotfix appropriate to install?
I have a stored procedure that sends an mail using sp_send_dbmail. My problem is, if I execute the stored procedure via my ASP.NET 2005 application, the email will not send. I know the stored procedure is being called and works because:
1. The stored procedure does 2 things, sets a status, then sends the email. The status is being changed, but the email is not being sent.
2. When I investigate with Sql Server Profiler, I see the stored proc being called and the values of the parameters are set as they should be.
What I don't understand is, I can copy the call in Sql Server Profler, and paste it in a Query Analyzer window and execute that same call, and everything works fine, status is changed, and the email is sent (to myself for testing and I receive it just fine).
Is there a reason why the email won't send via code? Am I suppose to setup some security that will allow my application to send emails? Any info would be GREATLY appreciated.
Hi,
We have a DTS package in the old SS2000 that we are still using in SS2005. We change the old xp_sendmail to use the new sp_send_dbmail. This runs fine without attachment. But with attachment, I'm encountering an error when running the package.
The task reported failure on execution.
The client connection security context could not be impersonated. Attaching file requires an integrated client login.
Syntax error or access violation.
I cannot find much topic on the net about this error.
Thanks very much for any help.
Regards
Hi everyone,
I'm trying to usie "sp_send_dbmail" and i'm required to provide value to: "@profile_name" argument. The trouble is i have no idea what it means..
How do i get to know what is my "profile_name" ?
Thanks.
Hallo
I want to write a trigger that sends me an email, when new records are added into a table.
For testing I have created one table called location1, which has simple data from AdventureWorks.Production.Location. And another table is called new_location, which stores the newly added records.
Here is the trigger:********************************
use [AdventureWorks]
if object_id ('location1') is not null
drop table location1
go
create table location1(LocationID int, LName varchar(50))
if object_id ('new_location') is not null
drop table new_location
go
create table new_location
(LocationID int, LName varchar(50))
if object_id ('change_ID', 'TR') is not null
drop trigger change_ID
go
create trigger change_ID on location1
for insert
as
delete new_location
insert into new_location
select * from inserted
exec sp_send_dbmail
@profile_name = 'Profile',
@recipients = 'email',
@subject = 'New Record(s) added.',
@query = 'select * from new_location order by LocationID';
go
********************************
After I insert statement, Management Studio runs the executing throughout.
insert into location1
select LocationID, Name
from Production.Location
order by LocationID
Can somebody help?
Hello all -
I'm using SQL Server 2005. I'm trying to send an email with query results attached.
I've enabled database mail (surface config, config wizard, profile set, accounts loaded).
I know database mail itself works as I'm able to send plain text messages as well as messages with HTML embedded.
However, when I try to format a query to send attachments with mail, as shown in BOL; I always get this error message -
<snip>
Msg 14661, Level 16, State 1, Procedure sp_send_dbmail, Line 476
Query execution failed: Error initializing COM
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
<snip>
Here is a sample of the query...
DECLARE @WHO VARCHAR(255)
SET @WHO = '<name would go here>'
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'sqlmail'
,@recipients = 'my.name@wouldgohere.com'
,@subject = 'testing attachment'
,@query = N'SELECT email_body
FROM WFS_non_stock_email_sendit_history
WHERE who_entered = @WHO
ORDER BY date_created DESC
OPTION(MAXDOP 1)'
,@execute_query_database = 'whaley'
,@attach_query_result_as_file = 1
,@query_attachment_filename = 'TESTATTACH.txt'
,@query_result_separator = ';'
If I were to run this query outside of this dbmail code, the query works fine.
If I can believe the go to line editor, line 476 in the sp_send_dbmail sproc is...
DELETE sysmail_attachments_transfer WHERE uid = @temp_table_uid
My problem here is this is a system sproc that MSFT built. I don't understand why I would get this error message instead of something more definitive and indicative of the problem.
Has anyone else seen this problem? I really need to be able to send attachments.
Thanks
Randyvol
hi all,
i made a stored procedure that uses the sp_send_dbmail to send mails. SQL server dislays the message "mail queued" but nothing is recieved
here is the code of the stored procedure i made
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'Exams',
@recipients = 'me@domain.com',
@Body_format = 'HTML' ,
@subject = 'Room Preparation' ,
@body='hi there';
so can anyone help with this issue
thanks in advance
Hello,
I'm using sp_send_dbmail with query option. Is there a way to not have "1 rows returned" in the email?
Thanks!
I am trying to use sp_send_dbmail to exec stored procedure results to an email as an attachement. This works very well, except for one problem, it is not giving the result headers for the queries in the stored procedure even with the
@query_result_header = 1
I have also tried this with a VERY simple query, just incase it was the multiple result sets causing the problem, also not putting the results as an attachment and just straight into the body.
Does anybody know how to solve this problem?
Thanks in advance,
Chris
Hi everyone,
i'd like to assign "@recipients" for sp_send_dbmail derived from a query as follows:
Code SnippetDECLARE @mailist VARCHAR(2000)
SET @mailist=
'select email
from
server.db.dbo.table
where
lastname=' +''''+'aaa'+''''
exec msdb.dbo.sp_send_dbmail
@profile_name='myprofile',
@recipients=@mailist,
@subject='email address through a query',
@...
when i run it i dont get any error message but mails to dot arrive.
any suggestion why ?
Thanks a lot
I'm trying to get sp_send_dbmail to attach the @query result set as an xml file.
The email is being sent and the attachment is present, but rather than ascii xml, it contains a chunk of nonsense like this
0x440352004F005700440470006B00650079004409660069007200730074006E0061006D00650044086C006100730074006E0061006D0065004410700068
I've tested the query with the first bit of code and sent the email with the second bit. I think I can jimmyjack it to write the xml to a temp file on the server and send that file using the @file_attachments parameter, but I'm hoping someone out there knows how to get this one to work.
Thanks in advance for any help you can give me.
Here's my code:
-- test that xml output is being generated
DECLARE @OUTPUT xml
SET @OUTPUT = (SELECT * FROM database..table FOR XML PATH('ROW'), root('ROOT'))
SELECT @OUTPUT
-- run the email proc
EXEC msdb.dbo.sp_send_dbmail
@QUERY= 'SET NOCOUNT ON SELECT * FROM database..table FOR XML PATH(''ROW''), root(''ROOT'')'
,@RECIPIENTS= 'userid@companyname.COM'
,@subject= 'Subject'
,@attach_query_result_as_file= 1
,@query_attachment_filename= 'ATTACHMENT.xml'
,@query_result_width= 32767
,@query_no_truncate= 1
,@append_query_error= 1
,@query_result_header= 1
When i use sp_send_dbmail stored procedure inside a Execute SQL task,the task is executed successfully.
But when i look in to 'Database Mail Log', it says
"The mail could not be sent to the recepient because of the mail server failure. Exception message: cannot send mails to mail server(The remote certificate is invalid according to the validation procedure)
Please let me know what can be the issue.
Hi everyone.
I've just installed sql server 2005 (evaluation) and i need to turn the option of using sp_send_dbmail on. I tried books on line but didnt manage to understand how it is done.
Thanks
Hi,
I have a SQL Agent Job that selects records that are of a particular age (from Table1) and inserts them into another table (Table 2) - multiple records get inserted as a single INSERT step. On Table 2 I then have a trigger set FOR INSERT which I was hoping would send an email using the fields copied from the batch job, one of which being an email address.
The trigger is: -
Code Snippet
CREATE TRIGGER trgSendMail ON Table2 FOR INSERT AS
DECLARE @myEmail VarChar(50)
SELECT @myEmail = strEmail FROM Inserted
EXEC sp_send_dbmail
@Profile_Name = '{MailProfile}',
@Recipients = @myEmail,
@Subject = '{MailTitle}',
@Body = '{MailBody}'
Thing is, the agent works fine but the trigger only sends an email to the first row inserted.
Any ideas on how to get around this so that if the batch job inserts 10 rows into Table2 then 10 emails are sent out?
Shaun.