I've got trouble -- somehow my msdb is corrupt and is marked as "suspect". I cannot open it up or it is apparently devoid of any table, etc.
It's on my SQLExpress instance and I'm willing to blow the entire server away -- since this server has been used as a sandbox for personal use.
Can I simply re-install SQLExpress?
Hi all,
I have a big problem with a Database on SQL-Server7.0 running on windows 2000 advanced server. The msdb database is marked suspect. I have tried a few suggestions in the SQL BOL but no luck.
Can anyone help please!
We have a new installation on Friday which was running fine. Unfortunately today, the msdb is marked suspect. Do I uninstall and reload SQL server or change the status. We only have a training data on the server presently. Does anybody has any other suggestions? Please help. Thanks for your assistance.
View 4 Replies View RelatedI have SQL Express SP1 installed on serveral machines, each has one instance and each instance has more than one database.
Recently, I found out some dbs are marked Suspect. MOM tool reported something like:
The database "your-DB" in the instance "Your-Instance" is in a critical state. The state is: Suspect.
I tried to run "DBCC CHECKDB", but it failed.
Can someone tell me what could cause the problem, and how to fix it?
Thanks,
Peter
Hello Gurus,
After the power failure my database was marked suspect. According to my associate we will execute SQL command sp_resetstatus. My question is what are the things we have to do first before we execute the command? We are using NT 4.
thanks
Claudio
Usman Masood writes "we were using our database named db1. when suddenly it stopped working and upon checking it gave an error that db1 and db2 are marked as suspected. while we were only using db1,,,,what is the cause of this error?"
View 1 Replies View RelatedHi all
I tried this command
DBCC CHECKDB (A2PD,REPAIR_ALLOW_DATA_LOSS)
The above command was not executed as there was some long rollback was going from a user...
I stopped and re started the MSSQLSERVR service...
Then i found the follwing error..
how can i work with the database A2PD marked as suspect
Server: Msg 926, Level 14, State 1, Line 1
Database 'A2PD' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
Thanks
Hi,I restored my Windows XP system and discovered that I cannot access aMSDE DB that was saved in D: drive (I restored my primary partition inC). How can I restore it?Thanks a lot.
View 6 Replies View RelatedHi there,
I need urgent help regarding a database that has been
marked as suspect.
I need to get the data from the database!!
I have a copy of the structure of the database but I need to get cerain very recent data from the database.
I have tried bcp and it doesn't work.
The backup that I have won't sufice
If a database is marked as suspect, Will it recover?>
And if so how long will it take.
If it won't recover is there any other way of getting the data,
Thanks in advance,
Fin
I have the MS SQL2000 database failed to recover at computer restart. Now the database is marked suspect. How can I manage to recover the data?
Thank you.
I'm running Win2000/SQL2000 on a Compaq CL380 Cluster Server. After a powerdown to do a physical move, the MSDB is now marked SUSPECT. I have tried the stored procedure SP_RESETSTATUS, a DBCC consistency check, and also have restored the database from backup. The database still shows MSDB is suspect. What can I do? We can't get a good backup as long as it is still this way as it depends on the SQL Agent.
View 1 Replies View RelatedDear Experts,
in one of our servers, the MSDB database is in suspect mode, and i've used the command sp_resetstatus
and i restarted the service also but still it is in suspect mode.
how can i change that to normal state?
it is asking to check the errorlog.
Vinod
Even you learn 1%, Learn it with 100% confidence.
My msdb database is marked as suspect. This means that my maintenance plandoesn't work. I'm a novice when it comes to sql server so now I'm wonderingif anyone could give a hint on how to fix the suspect msdb database? Doesthis database contain any vital information? What could be the reason thatthis database become suspect?Appreciate any suggestions in this matter.Thanks!--mvhHallgeir
View 2 Replies View RelatedHi,
I have mssql 2005 installed and i see that MSDB database is marked as suspect. I almost tried all the steps which are submitted in the forums.
1) I shut down the server, navigating to the directory 'd:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn' and doing the following: start sqlservr.exe -c -T3608
2) renamed the damaged msdb files (msdbdata.mdf and msdblog.ldf in the 'd:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData' directory)
3) Run the instmsdb.sql script in the 'd:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLInstall' directory
--x---
When I executed third step it returned me below error:
Msg 926, Level 14, State 1, Line 63
Database 'msdb' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
Please advice me.
A client improperly shutdown a PC running MSDE and it corrupted the MSDB database which contained several DTS packages. I have tried fixing the problem on my own but have exhausted all the simple options like restarting SQL Server.
I googled the problem and found the following SQL script:
USE MasterGO-- Determine the original database statusSELECT [Name], DBID, StatusFROM master.dbo.sysdatabasesGO-- Enable system changessp_configure 'allow updates',1GORECONFIGURE WITH OVERRIDEGO-- Update the database statusUPDATE master.dbo.sysdatabasesSET Status = 24WHERE [Name] = 'msdb'GO-- Disable system changessp_configure 'allow updates',0GORECONFIGURE WITH OVERRIDEGO-- Determine the final database statusSELECT [Name], DBID, StatusFROM master.dbo.sysdatabasesGO
I ran it and and it generated the log file below. I restarted MS SQL but the database was still marked as suspect (as I would expect from the log file).
Any help in interpreting and recovering from this problem would be greatly appreciated.
Thank,
MickeyBob
Log file:
2007-07-09 15:47:39.39 server Microsoft SQL Server 2000 - 8.00.760 (Intel X86) Dec 17 2002 14:22:05 Copyright (c) 1988-2003 Microsoft Corporation Desktop Engine on Windows NT 5.1 (Build 2600: Service Pack 2)2007-07-09 15:47:39.39 server Copyright (C) 1988-2002 Microsoft Corporation.2007-07-09 15:47:39.39 server All rights reserved.2007-07-09 15:47:39.39 server Server Process ID is 2324.2007-07-09 15:47:39.39 server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQLLOGERRORLOG'.2007-07-09 15:47:39.40 server SQL Server is starting at priority class 'normal'(2 CPUs detected).2007-07-09 15:47:39.84 server SQL Server configured for thread mode processing.2007-07-09 15:47:39.84 server Using dynamic lock allocation. [500] Lock Blocks, [1000] Lock Owner Blocks.2007-07-09 15:47:39.89 spid3 Starting up database 'master'.2007-07-09 15:47:40.01 server Using 'SSNETLIB.DLL' version '8.0.766'.2007-07-09 15:47:40.01 spid5 Starting up database 'model'.2007-07-09 15:47:40.01 server SQL server listening on Shared Memory.2007-07-09 15:47:40.01 server SQL Server is ready for client connections2007-07-09 15:47:40.04 spid3 Server name is 'BALEHANDLING'.2007-07-09 15:47:40.04 spid3 Skipping startup of clean database id 52007-07-09 15:47:40.04 spid3 Skipping startup of clean database id 62007-07-09 15:47:40.04 spid3 Starting up database 'msdb'.2007-07-09 15:47:40.23 spid5 Clearing tempdb database.2007-07-09 15:47:41.18 spid5 Starting up database 'tempdb'.2007-07-09 15:47:55.56 spid51 Using 'xpstar.dll' version '2000.80.760' to execute extended stored procedure 'sp_MSgetversion'.2007-07-09 15:48:01.60 spid3 Analysis of database 'msdb' (4) is 100% complete (approximately 0 more seconds)2007-07-09 15:48:01.62 spid3 Recovery of database 'msdb' (4) is 0% complete (approximately 9 more seconds) (Phase 2 of 3).2007-07-09 15:48:43.95 spid3 Recovery of database 'msdb' (4) is 40% complete (approximately 5 more seconds) (Phase 2 of 3).2007-07-09 15:48:43.96 spid3 7678 transactions rolled forward in database 'msdb' (4).2007-07-09 15:48:43.96 spid3 Recovery of database 'msdb' (4) is 40% complete (approximately 5 more seconds) (Phase 3 of 3).2007-07-09 15:48:44.01 spid3 Using 'dbghelp.dll' version '4.0.5'*Dump thread - spid = 3, PSS = 0x42c2c098, EC = 0x42c2c3c0*Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQLlogSQLDump0030.txt* ********************************************************************************* BEGIN STACK DUMP:* 07/09/07 15:48:44 spid 3** ** ** MODULE BASE END SIZE* sqlservr 00400000 00B2CFFF 0072d000* ntdll 7C900000 7C9AFFFF 000b0000* kernel32 7C800000 7C8F3FFF 000f4000* ADVAPI32 77DD0000 77E6AFFF 0009b000* RPCRT4 77E70000 77F00FFF 00091000* USER32 77D40000 77DCFFFF 00090000* GDI32 77F10000 77F56FFF 00047000* OPENDS60 41060000 41065FFF 00006000* MSVCRT 77C10000 77C67FFF 00058000* UMS 41070000 4107CFFF 0000d000* SQLSORT 42AE0000 42B6FFFF 00090000* MSVCIRT 002A0000 002B0FFF 00011000* sqlevn70 41080000 41086FFF 00007000* NETAPI32 024F0000 02543FFF 00054000* SSNETLIB 00DC0000 00DD4FFF 00015000* WSOCK32 00DF0000 00DF8FFF 00009000* WS2_32 00E00000 00E16FFF 00017000* WS2HELP 00E20000 00E27FFF 00008000* SSNMPN70 02CD0000 02CD5FFF 00006000* security 02FD0000 02FD3FFF 00004000* SECUR32 02FE0000 02FF0FFF 00011000* VERSION 030C0000 030C7FFF 00008000* SSmsLPCn 03000000 03006FFF 00007000* ntdsapi 030A0000 030B2FFF 00013000* DNSAPI 030D0000 030F6FFF 00027000* WLDAP32 03100000 0312BFFF 0002c000* msv1_0 03330000 03352FFF 00023000* iphlpapi 03360000 03378FFF 00019000* OLE32 03390000 034CBFFF 0013c000* xpsp2res 034D0000 03794FFF 002c5000* CLBCATQ 037A0000 0381EFFF 0007f000* OLEAUT32 03820000 038ABFFF 0008c000* COMRes 038B0000 03974FFF 000c5000* sqloledb 03990000 03A10FFF 00081000* MSDART 03A20000 03A44FFF 00025000* COMCTL32 03A50000 03AE9FFF 0009a000* comdlg32 03AF0000 03B38FFF 00049000* SHLWAPI 03B40000 03BB5FFF 00076000* SHELL32 03BC0000 043D4FFF 00815000* MSDATL3 043E0000 043F6FFF 00017000* comctl32 044C0000 045C2FFF 00103000* oledb32 04810000 04886FFF 00077000* OLEDB32R 04480000 04490FFF 00011000* xpstar 04890000 048D6FFF 00047000* SQLRESLD 04420000 04426FFF 00007000* SQLSVC 048E0000 048F6FFF 00017000* ODBC32 04900000 0493CFFF 0003d000* odbcbcp 044A0000 044A5FFF 00006000* W95SCM 04940000 0494BFFF 0000c000* SQLUNIRL 04950000 0497CFFF 0002d000* WINSPOOL 04980000 049A5FFF 00026000* SHFOLDER 049B0000 049B8FFF 00009000* odbcint 04B00000 04B16FFF 00017000* clusapi 04B20000 04B30FFF 00011000* resutils 04B40000 04B51FFF 00012000* USERENV 04B60000 04C12FFF 000b3000* NDDEAPI 04C30000 04C37FFF 00008000* SQLSVC 04C40000 04C45FFF 00006000* xpstar 04C50000 04C58FFF 00009000* dbghelp 04CA0000 04D54FFF 000b5000** Edi: 42C2C3C0: 42C2C098 42C2CB30 42C2CB30 42C2CD20 42C2CD20 42C2C030 * Esi: 00000000: * Eax: 00000000: * Ebx: 42C2C098: 01000003 00000000 00000000 00000000 00000000 00000000 * Ecx: 0294B43C: 00000000 0001003F 00000000 00000000 00000000 00000000 * Edx: 7C90EB94: 24A48DC3 00000000 0024648D 90909090 24548D90 C32ECD08 * Eip: 0087A90E: 4D830088 75FFFFFC 0875FF0C E8E04D8B 0000002D 64F04D8B * Ebp: 0294B420: 0294BC40 0087C41F 42C2C098 0294BDA4 0294C016 77C3F931 * SegCs: 0000001B: * EFlags: 00010246: 006C0069 00730065 0053005C 00650069 0065006D 0073006E * Esp: 0294B3F4: 42C2C3C0 00000000 42C2C098 0294B43C 42C2C000 0294B3F4 * SegSs: 00000023: * ******************************************************************************** -------------------------------------------------------------------------------* Short Stack Dump* 0087A90E Module(sqlservr+0047A90E) (GetOSErrString+00003BDB)* 0087C41F Module(sqlservr+0047C41F) (GetOSErrString+000056EC)* 00931097 Module(sqlservr+00531097) (CDStream:umpBytesHex+000A9840)* 007FC8A6 Module(sqlservr+003FC8A6) (CDStream:perator=+00005B0E)* 00403B44 Module(sqlservr+00003B44)* 004416A7 Module(sqlservr+000416A7)* 0040F1E5 Module(sqlservr+0000F1E5)* 0040FF2B Module(sqlservr+0000FF2B)* 0040FE45 Module(sqlservr+0000FE45)* 00436DD6 Module(sqlservr+00036DD6)* 0043683C Module(sqlservr+0003683C)* 0040FD6F Module(sqlservr+0000FD6F)* 0040FB39 Module(sqlservr+0000FB39)* 008607CA Module(sqlservr+004607CA) (CDStream:perator=+00069A32)* 0086C203 Module(sqlservr+0046C203) (CDStream:perator=+0007546B)* 004401D7 Module(sqlservr+000401D7)* 0085EA07 Module(sqlservr+0045EA07) (CDStream:perator=+00067C6F)* 0050C003 Module(sqlservr+0010C003)* 005100FF Module(sqlservr+001100FF)* 0050F152 Module(sqlservr+0010F152)* 00519C2D Module(sqlservr+00119C2D)* 00829863 Module(sqlservr+00429863) (CDStream:perator=+00032ACB)* 005196A1 Module(sqlservr+001196A1)* 00518066 Module(sqlservr+00118066)* 41074698 Module(UMS+00004698) (UmsThreadScheduler::~UmsThreadScheduler+00000198)* 542868FF Module(UNKNOWN+00000000)* -------------------------------------------------------------------------------2007-07-09 15:48:44.06 spid3 SQL Server Assertion: File: <recbase.cpp>, line=1378 Failed Assertion = 'm_offBeginVar < m_SizeRec'.2007-07-09 15:48:44.06 spid3 Location: recbase.cpp:1378Expression: m_offBeginVar < m_SizeRecSPID: 3Process ID: 23242007-07-09 15:48:44.06 spid3 Error: 3624, Severity: 20, State: 1.2007-07-09 15:48:44.06 spid3 Error: 3314, Severity: 21, State: 32007-07-09 15:48:44.06 spid3 Error while undoing logged operation in database 'msdb'. Error at log record ID (97997:269:86)..2007-07-09 15:48:44.09 spid3 Using 'dbghelp.dll' version '4.0.5'*Dump thread - spid = 3, PSS = 0x42c2c098, EC = 0x42c2c3c0*Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQLlogSQLDump0031.txt* ********************************************************************************* BEGIN STACK DUMP:* 07/09/07 15:48:44 spid 3** ** ** MODULE BASE END SIZE* sqlservr 00400000 00B2CFFF 0072d000* ntdll 7C900000 7C9AFFFF 000b0000* kernel32 7C800000 7C8F3FFF 000f4000* ADVAPI32 77DD0000 77E6AFFF 0009b000* RPCRT4 77E70000 77F00FFF 00091000* USER32 77D40000 77DCFFFF 00090000* GDI32 77F10000 77F56FFF 00047000* OPENDS60 41060000 41065FFF 00006000* MSVCRT 77C10000 77C67FFF 00058000* UMS 41070000 4107CFFF 0000d000* SQLSORT 42AE0000 42B6FFFF 00090000* MSVCIRT 002A0000 002B0FFF 00011000* sqlevn70 41080000 41086FFF 00007000* NETAPI32 024F0000 02543FFF 00054000* SSNETLIB 00DC0000 00DD4FFF 00015000* WSOCK32 00DF0000 00DF8FFF 00009000* WS2_32 00E00000 00E16FFF 00017000* WS2HELP 00E20000 00E27FFF 00008000* SSNMPN70 02CD0000 02CD5FFF 00006000* security 02FD0000 02FD3FFF 00004000* SECUR32 02FE0000 02FF0FFF 00011000* VERSION 030C0000 030C7FFF 00008000* SSmsLPCn 03000000 03006FFF 00007000* ntdsapi 030A0000 030B2FFF 00013000* DNSAPI 030D0000 030F6FFF 00027000* WLDAP32 03100000 0312BFFF 0002c000* msv1_0 03330000 03352FFF 00023000* iphlpapi 03360000 03378FFF 00019000* OLE32 03390000 034CBFFF 0013c000* xpsp2res 034D0000 03794FFF 002c5000* CLBCATQ 037A0000 0381EFFF 0007f000* OLEAUT32 03820000 038ABFFF 0008c000* COMRes 038B0000 03974FFF 000c5000* sqloledb 03990000 03A10FFF 00081000* MSDART 03A20000 03A44FFF 00025000* COMCTL32 03A50000 03AE9FFF 0009a000* comdlg32 03AF0000 03B38FFF 00049000* SHLWAPI 03B40000 03BB5FFF 00076000* SHELL32 03BC0000 043D4FFF 00815000* MSDATL3 043E0000 043F6FFF 00017000* comctl32 044C0000 045C2FFF 00103000* oledb32 04810000 04886FFF 00077000* OLEDB32R 04480000 04490FFF 00011000* xpstar 04890000 048D6FFF 00047000* SQLRESLD 04420000 04426FFF 00007000* SQLSVC 048E0000 048F6FFF 00017000* ODBC32 04900000 0493CFFF 0003d000* odbcbcp 044A0000 044A5FFF 00006000* W95SCM 04940000 0494BFFF 0000c000* SQLUNIRL 04950000 0497CFFF 0002d000* WINSPOOL 04980000 049A5FFF 00026000* SHFOLDER 049B0000 049B8FFF 00009000* odbcint 04B00000 04B16FFF 00017000* clusapi 04B20000 04B30FFF 00011000* resutils 04B40000 04B51FFF 00012000* USERENV 04B60000 04C12FFF 000b3000* NDDEAPI 04C30000 04C37FFF 00008000* SQLSVC 04C40000 04C45FFF 00006000* xpstar 04C50000 04C58FFF 00009000* dbghelp 04CA0000 04D54FFF 000b5000** Edi: 42C2C3C0: 42C2C098 42C2C3C4 42C2C3C4 42C2CD20 42C2CB30 42C2C030 * Esi: 00000000: * Eax: 00000000: * Ebx: 42C2C098: 01000003 00000000 00000000 00000000 00000000 00000000 * Ecx: 02946B44: 00000000 0001003F 00000000 00000000 00000000 00000000 * Edx: 7C90EB94: 24A48DC3 00000000 0024648D 90909090 24548D90 C32ECD08 * Eip: 0087A90E: 4D830088 75FFFFFC 0875FF0C E8E04D8B 0000002D 64F04D8B * Ebp: 02946B28: 02947348 0087C41F 42C2C098 029474AC 02947735 77C3F931 * SegCs: 0000001B: * EFlags: 00010246: 006C0069 00730065 0053005C 00650069 0065006D 0073006E * Esp: 02946AFC: 42C2C3C0 00000000 42C2C098 02946B44 42C2C000 02946AFC * SegSs: 00000023: * ******************************************************************************** -------------------------------------------------------------------------------* Short Stack Dump* 0087A90E Module(sqlservr+0047A90E) (GetOSErrString+00003BDB)* 0087C41F Module(sqlservr+0047C41F) (GetOSErrString+000056EC)* 00931097 Module(sqlservr+00531097) (CDStream:umpBytesHex+000A9840)* 0085C09D Module(sqlservr+0045C09D) (CDStream:perator=+00065305)* 0050A016 Module(sqlservr+0010A016)* 008D048F Module(sqlservr+004D048F) (CDStream:umpBytesHex+00048C38)* 0085D84B Module(sqlservr+0045D84B) (CDStream:perator=+00066AB3)* 005100FF Module(sqlservr+001100FF)* 0050F152 Module(sqlservr+0010F152)* 00519C2D Module(sqlservr+00119C2D)* 00829863 Module(sqlservr+00429863) (CDStream:perator=+00032ACB)* 005196A1 Module(sqlservr+001196A1)* 00518066 Module(sqlservr+00118066)* 41074698 Module(UMS+00004698) (UmsThreadScheduler::~UmsThreadScheduler+00000198)* 542868FF Module(UNKNOWN+00000000)* -------------------------------------------------------------------------------2007-07-09 15:48:44.14 spid3 SQL Server Assertion: File: <logscan.cpp>, line=3063 Failed Assertion = '(m_lastLSN == NullLSN) || (m_lastLSN > m_curLSN)'.2007-07-09 15:48:44.14 spid3 Location: logscan.cpp:3063Expression: (m_lastLSN == NullLSN) || (m_lastLSN > m_curLSN)SPID: 3Process ID: 23242007-07-09 15:48:44.14 spid3 Using 'dbghelp.dll' version '4.0.5'*Dump thread - spid = 3, PSS = 0x42c2c098, EC = 0x42c2c3c0*Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQLlogSQLDump0032.txt* ********************************************************************************* BEGIN STACK DUMP:* 07/09/07 15:48:44 spid 3** ** ** MODULE BASE END SIZE* sqlservr 00400000 00B2CFFF 0072d000* ntdll 7C900000 7C9AFFFF 000b0000* kernel32 7C800000 7C8F3FFF 000f4000* ADVAPI32 77DD0000 77E6AFFF 0009b000* RPCRT4 77E70000 77F00FFF 00091000* USER32 77D40000 77DCFFFF 00090000* GDI32 77F10000 77F56FFF 00047000* OPENDS60 41060000 41065FFF 00006000* MSVCRT 77C10000 77C67FFF 00058000* UMS 41070000 4107CFFF 0000d000* SQLSORT 42AE0000 42B6FFFF 00090000* MSVCIRT 002A0000 002B0FFF 00011000* sqlevn70 41080000 41086FFF 00007000* NETAPI32 024F0000 02543FFF 00054000* SSNETLIB 00DC0000 00DD4FFF 00015000* WSOCK32 00DF0000 00DF8FFF 00009000* WS2_32 00E00000 00E16FFF 00017000* WS2HELP 00E20000 00E27FFF 00008000* SSNMPN70 02CD0000 02CD5FFF 00006000* security 02FD0000 02FD3FFF 00004000* SECUR32 02FE0000 02FF0FFF 00011000* VERSION 030C0000 030C7FFF 00008000* SSmsLPCn 03000000 03006FFF 00007000* ntdsapi 030A0000 030B2FFF 00013000* DNSAPI 030D0000 030F6FFF 00027000* WLDAP32 03100000 0312BFFF 0002c000* msv1_0 03330000 03352FFF 00023000* iphlpapi 03360000 03378FFF 00019000* OLE32 03390000 034CBFFF 0013c000* xpsp2res 034D0000 03794FFF 002c5000* CLBCATQ 037A0000 0381EFFF 0007f000* OLEAUT32 03820000 038ABFFF 0008c000* COMRes 038B0000 03974FFF 000c5000* sqloledb 03990000 03A10FFF 00081000* MSDART 03A20000 03A44FFF 00025000* COMCTL32 03A50000 03AE9FFF 0009a000* comdlg32 03AF0000 03B38FFF 00049000* SHLWAPI 03B40000 03BB5FFF 00076000* SHELL32 03BC0000 043D4FFF 00815000* MSDATL3 043E0000 043F6FFF 00017000* comctl32 044C0000 045C2FFF 00103000* oledb32 04810000 04886FFF 00077000* OLEDB32R 04480000 04490FFF 00011000* xpstar 04890000 048D6FFF 00047000* SQLRESLD 04420000 04426FFF 00007000* SQLSVC 048E0000 048F6FFF 00017000* ODBC32 04900000 0493CFFF 0003d000* odbcbcp 044A0000 044A5FFF 00006000* W95SCM 04940000 0494BFFF 0000c000* SQLUNIRL 04950000 0497CFFF 0002d000* WINSPOOL 04980000 049A5FFF 00026000* SHFOLDER 049B0000 049B8FFF 00009000* odbcint 04B00000 04B16FFF 00017000* clusapi 04B20000 04B30FFF 00011000* resutils 04B40000 04B51FFF 00012000* USERENV 04B60000 04C12FFF 000b3000* NDDEAPI 04C30000 04C37FFF 00008000* SQLSVC 04C40000 04C45FFF 00006000* xpstar 04C50000 04C58FFF 00009000* dbghelp 04CA0000 04D54FFF 000b5000** Edi: 42C2C3C0: 42C2C098 42C2C3C4 42C2C3C4 42C2CD20 42C2CB30 42C2C030 * Esi: 00000000: * Eax: 00000000: * Ebx: 42C2C098: 01000003 00000000 00000000 00000000 00000000 00000000 * Ecx: 029468EC: 00000000 0001003F 00000000 00000000 00000000 00000000 * Edx: 7C90EB94: 24A48DC3 00000000 0024648D 90909090 24548D90 C32ECD08 * Eip: 0087A90E: 4D830088 75FFFFFC 0875FF0C E8E04D8B 0000002D 64F04D8B * Ebp: 029468D0: 029470F0 0087C41F 42C2C098 02947254 029474D9 77C3F931 * SegCs: 0000001B: * EFlags: 00010246: 006C0069 00730065 0053005C 00650069 0065006D 0073006E * Esp: 029468A4: 42C2C3C0 00000000 42C2C098 029468EC 42C2C000 029468A4 * SegSs: 00000023: * ******************************************************************************** -------------------------------------------------------------------------------* Short Stack Dump* 0087A90E Module(sqlservr+0047A90E) (GetOSErrString+00003BDB)* 0087C41F Module(sqlservr+0047C41F) (GetOSErrString+000056EC)* 00931097 Module(sqlservr+00531097) (CDStream:umpBytesHex+000A9840)* 0085C2C1 Module(sqlservr+0045C2C1) (CDStream:perator=+00065529)* 0050A17A Module(sqlservr+0010A17A)* 0050A0BF Module(sqlservr+0010A0BF)* 0050A016 Module(sqlservr+0010A016)* 008D048F Module(sqlservr+004D048F) (CDStream:umpBytesHex+00048C38)* 0085D84B Module(sqlservr+0045D84B) (CDStream:perator=+00066AB3)* 005100FF Module(sqlservr+001100FF)* 0050F152 Module(sqlservr+0010F152)* 00519C2D Module(sqlservr+00119C2D)* 00829863 Module(sqlservr+00429863) (CDStream:perator=+00032ACB)* 005196A1 Module(sqlservr+001196A1)* 00518066 Module(sqlservr+00118066)* 41074698 Module(UMS+00004698) (UmsThreadScheduler::~UmsThreadScheduler+00000198)* 542868FF Module(UNKNOWN+00000000)* -------------------------------------------------------------------------------2007-07-09 15:48:44.17 spid3 SQL Server Assertion: File: <logscan.cpp>, line=3282 Failed Assertion = 'm_lastLSN == NullLSN || startLSN < m_lastLSN'.2007-07-09 15:48:44.17 spid3 Location: logscan.cpp:3282Expression: m_lastLSN == NullLSN || startLSN < m_lastLSNSPID: 3Process ID: 23242007-07-09 15:48:44.20 spid3 Error: 9004, Severity: 23, State: 72007-07-09 15:48:44.20 spid3 An error occurred while processing the log for database 'msdb'..2007-07-09 15:48:44.20 spid3 Error: 3414, Severity: 21, State: 12007-07-09 15:48:44.20 spid3 Database 'msdb' (database ID 4) could not recover. Contact Technical Support..2007-07-09 15:48:44.20 spid3 Recovery complete.2007-07-09 15:48:44.20 spid3 SQL global counter collection task is created.2007-07-09 15:49:21.09 spid51 Starting up database 'Baling'.2007-07-09 15:49:21.18 spid51 Starting up database 'WWAlmDb'.2007-07-09 15:49:21.29 spid51 Starting up database 'Baling'.2007-07-09 15:49:21.39 spid51 Starting up database 'WWAlmDb'.2007-07-09 15:51:11.90 spid53 Starting up database 'Baling'.2007-07-09 15:51:11.96 spid53 Starting up database 'WWAlmDb'.2007-07-09 15:51:33.82 spid52 Error: 15457, Severity: 0, State: 12007-07-09 15:51:33.82 spid52 Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install..2007-07-09 15:51:33.89 spid52 Error: 15457, Severity: 0, State: 12007-07-09 15:51:33.89 spid52 Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install..
Mu MSDB database is in suspect mode. Anyone have any info to help get it out. It tells me that it cannot find the path specified for the backups, yet the path exists and there is more than enough disk space even though it says that there is not? I am confused. First time getting this error and doesn't make sense why.
Thanks!
Dear Experts,
I'm using sql server 2005, and now i'm trying to restore with one backup. then i'm getting error saying that MSDB database in suspect mode.
how to make the DB to the normal mode....
please help me in this regard
Vinod
Even you learn 1%, Learn it with 100% confidence.
We found an interesting 'issue' in one of our productive user database:
The output of msdb..suspect_pages table:
db_idfile_idpage_idevent_typeerror_countlast_update
16 2 22 32015.06.12 10:40
16 2 3 3 3 2015.06.12 10:40
16 2 6 3 3 2015.06.12 10:40
16 2 7 3 3 2015.06.12 10:40
16 2 1 3 3 2015.06.12 10:40
The problem is, that this user database only has one data file and file_id 2 is the log file.I understand that the event_type shows checksum and torn page error but in the log file? DBCC CHECKDB shows no errors and the database is part of an AOAG in synchronized state.We have log backups in every 15 minutes.
Hi
I want to suspect database
stop server first
I try to rename C:Program Files (x86)Microsoft SQL ServerMSSQL.1MSSQLDatamsdbdata.mdf to msdbdata.sav
and then start the server
use command to check:
SELECT status & 256 FROM master.dbo.sysdatabases WHERE name = database_name
if the result is 256,it means the msdb is suspect,but the result is 0,it same as the normal status
do you know how to set database suspect with this way, or do you know other way to suspect databse.
absolutely,I could re-back my server noraml with your way
Thanks
Whenever I start my SQL Express 2005 database, I get the following in the logs :
View 10 Replies View RelatedOne of my database (name XYZ) shows suspect status in EM but when i try to dig further by running below query i get only "OK" ( see query)
SELECT [name],status, case status when (status & 32) then 'Loading'
when (status & 32) then 'Loading'
when (status & 64) then 'Pre Recovery'
when (status & 128) then 'Recovering'
when (status & 256) then 'Not recoverd'
when (status & 512) then ' Offline'
when (status & 1024) then ' Single user'
when (status & 1024) then ' Read only'
when (status & 32768) then ' Emergency Mode' else 'OK' end as status
FROM master.dbo.sysdatabases
WHERE [name] NOT IN ('distribution', 'tempdb', 'model','Pubs','Northwind')
also i run this
select * from sysdatabases where databaseproperty(name,N'IsSuspect') <> 1
and here also i get all the database including "XYZ"...i guess if "XYZ" is suspect the resultset should not be including "XYZ"
Why if the EM shows suspect status FOR "XYZ" DATABASE it should come up when i check status column in sysdatabases table?
Hi! maybe this question is very common, but i can resolve that. I have a DB marked 'loading', and nothing seems to change this state. Is any way to revert to a normal state, or the only way is destroy and re-create?
Thanks in advance
Hi all,
I want to know if the System.Xml.XmlTextReader is marked with Host Protection Attributes(HPA) in the SQL Server 2005 CLR. I ask this because when I add a custom class that inherits from System.Xml.XmlTextReader, I get a code access security error at runtime. I am able to register the assembly just fine. I have tested it with all the cases and pretty much sure my code breaks in this class.
My code snippet is shown below:
public class CustomXmlTextReader : XmlTextReader
{
......
......
}
Doesn't really matter what is in this class. It gives an expection even when there is no code inside.
Any help is greatly appreciated.
Thanks,
Jai
I canceled a restore job, and now the database is marked (Loading). When I go to propertied it tells me "database can't be opened, it's in a middle of a restore" Yet from a Query window I can connect and run queries against that database. Should I just wait until it finishes "Loading" or should I re-start the server?
Thanks
I have a 3GB DB that I was running an update script on. The sript failed and ran out of transaction log space. I expanded it and stopped and restarted SQL. The user DB is now marked as recovering. How long should I wait for it to recover? I don't want to have to restore again and start all over with my script. Please help.
(By the way this is a restored DB)
Thanks.
LC
Simon writes "Hi
using the following syntax in SQL 2005 (win 2003) to restore a log to a marked transaction. Code runs ok but I'm never getting back to the point in time where id 13 still exists , help !
kind regards
Simon
/*backup and overwrite */
BACKUP DATABASE AdventureWorks
TO DISK = N'C:SQL Backupsadw.bak'
WITH FORMAT, INIT, NAME = N'AdventureWorks-Full Database Backup'
GO
/* verify data */
restore verifyonly
from disk = 'C:SQL Backupsadw.bak'
with file = 1
go
-- with MARK to place a marker in the tranny log
BEGIN TRANSACTION CandidateDelete13a
WITH MARK N'Deleting a Job Candidate';
GO
USE AdventureWorks;
GO
DELETE FROM AdventureWorks.HumanResources.JobCandidate
WHERE JobCandidateID = 13;
GO
COMMIT TRANSACTION CandidateDelete13a;
GO
BACKUP LOG AdventureWorks
TO DISK = N'C:SQL Backupsadw_log.bak'
with format, NAME = N'AdventureWorks-Trans Log Backup'
GO
/*
RESTORE DATABASE AdventureWorks FROM DISK = N'C:SQL Backupsadw.bak' WITH FILE = 1, RECOVERY, NOUNLOAD, REPLACE,STATS = 10
GO
*/
use master
RESTORE DATABASE AdventureWorks FROM DISK = N'C:SQL Backupsadw.bak' WITH FILE = 1, NORECOVERY, NOUNLOAD, REPLACE,STATS = 10
GO
use master
RESTORE LOG AdventureWorks FROM DISK = N'C:SQL Backupsadw_log.bak'
WITH recovery, STOPatMARK = 'CandidateDelete13a'
GO"
We've got a Sharepoint 3.0 SQL database that was partially corrupted during an ill executed BackupExec restore. Now the database will not start up.
Error log reports:
2008-05-07 13:01:50.85 spid8s Starting up database 'model'.
2008-05-07 13:01:50.89 spid8s The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2008-05-07 13:01:50.89 spid5s The database 'msdb' is marked RESTORING and is in a state that does not allow recovery to be run.
2008-05-07 13:01:50.89 spid8s Error: 927, Severity: 14, State: 2.
2008-05-07 13:01:50.89 spid8s Database 'model' cannot be opened. It is in the middle of a restore.
2008-05-07 13:01:50.89 spid8s Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized.
2008-05-07 13:01:50.89 spid8s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
I'm looking for suggestions on how to get the database back up and running with minimal SQL Server knowledge. If anyone has a quick and dirty how-to that would be appreciated of course any detailed documents specific to this configuration would also be greatly appreciated.
Thank you,
~Pete
hi all,
i have a snapshot replication running on multiple publisher singel subscriber running on sql2k. i'm frequently encountering these error.
the subscription has been marked inactive and must be reinitialized.
no synch
i've set the subcription to never expire in the publications property tab.
thanks
Hello Friends
I had a really big Problem.
Sorry about my Englisch, came from Austria.
After a SQL Database Restore, who ends with no faults, i cannot connect to it.
In the Enterprise Manager it is marked as "in load" and in the Errorlogfile stand following.
"Bypassing Recovery für Database "WINLINE" because it is marked "in load"?
What does it mean! Please help!!
Thanks for all answers
Mike
Hi All,
Sql Server 7
I have database called ecatalog
i have a scheduled job which shrinks the database every day once at 12 am
today the job got failed
In the view Job history its showing the below contents
-------------------------------------------------------
Database 'ecatalog' is already open and can only have one user at a time. [SQLSTATE 42000] (Error
924) DBCC execution completed. If DBCC printed error messages, contact your system
administrator. [SQLSTATE 01000] (Message 2528). The step failed.
And in Application Log of event viewer its showing the below contents
------------------------------------------------------------------------------
The description for Event ID ( 208 ) in Source ( SQLServerAgent$ABCSQL ) cannot be found. The
local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: Shrink Database
- ecatalog, 0xA0C4F8157A744244A61A4ECABE8C6056, Failed, 4/19/2004 12:00:03 AM, The job failed.
The Job was invoked by Schedule 27 (Shrink Database - ecatalog). The last step to run was step 1 (Shrink Database - ecatalog)..
I ran the job manually it worked fine
but now when i go and see the database ecatalog in my Enterprise Manager
it is showing ecatalog(Single User)
What is the meaning of this, will this make any problem to my database
Please help me in this.
Waiting for Reply
Adil
Hi all,
Is there a method of identifying all the procedures in a database that are marked for autostart?
i.e. select name from sysobjects where blah = 'autostart'
Thanks,
rocr
I read in Microsoft SQL Server 2005 Integration Services by Kirk Haselden that the BULK INSERT task was provided for backward compatibility and its use is disrecommended.
But after looking on the web I cannot find information supporting this.
Do you think the BULK INSERT task should be used for new development?
Thanks
After I restore a database with SQL the database I cannot access it. However, after restoring using Enterprise Manager I do not have the same problem. The message I get is:
Database 'les_test' cannot be opened. It is in the middle of a restore.
The code I am trying to use for the restore is:
RESTORE DATABASE les_test
FROM DISK = 'c:MSSQL7BACKUPiztrobeta_db_200012011201.BAK'
WITH NORECOVERY,
REPLACE,
MOVE 'biztrobeta_PRI' TO 'c:mssql7DATAiztrobeta_PRI.ndf',
MOVE 'biztrobeta_FGE_Dat1' TO 'c:mssql7DATAiztrobeta_FGE_Dat1.ndf',
MOVE 'biztrobeta_FGX_Idx1 ' TO 'c:mssql7DATAiztrobeta_FGX_Idx1.ndf',
MOVE 'biztrobeta_LOG' TO 'c:mssql7Dataiztrobeta_LOG.ldf'
GO
I tried changing the status in the master..sysdatabases tables, but the restored database was still not accessible. I tried to do this using the following statment:
UPDATE sysdatabases
SET STATUS = 4194316
WHERE name = 'les_test'
GO
Any help is appreciated.
Thanks,
Les