Hi
Im installing MSDE2000 on new Machine Pentium IV LGA Processor HT technology; OS Windows 2000 Professional. Its getting roll Back after some installation.
The same setup if im installing on my other new Machine With Scoket 478 Processor OS Windows2000 Professional. Its installing completly.
Is there any compatibilty problem.
Please Advice me what to do. Thanks In advance
Hi,
I've been trying to follow Microsoft's instructions on installing MSDE2000 for Visual Studio. I do instancename=VSDOTNET SECURITY=SQL SAPWD=XXXX and all that. When I reboot, I notice that I have no services in the SQL Service Manager, nor can it find my computername.
Anybody know why this is?
hey guys heres my problem iam trying to install SQL server2000 but i keep on running into problems....??
here is what iam having problems with
setup SAPWD="AStrongSAPwd" SECURITYMODE=SQL
it keeps saying the instance name specified is invalid there has to be an easyer way to run the program...??
i have all ready set up an instance name and the SAPWD.
any suggestions?? please help
Hi,
I have a problem with the database that I created using MSDE 2000 SP4. I tried to attached the database into the new SQL Express using the sp_attach_db and it worked. The message mentioned is that the DB has been upgraded. When I tried to attach back the DB back to my MSDE, it can't be done.
My PC is XP pro SP2. Before I reattach the DB back to MSDE, I detach the DB from my SQL express.
Is it because once the SQL express upgraded the DB, it cannot be supported by MSDE or SQL 2000 ?
Thanks. Any help is greatly appreciated.
Ii have installed msde 2000 now all my Access files are in 2000 format how do i change back to 2003?
View 1 Replies View Relatedlooks like a noob question but how can i manage msde2000...i can see sql is runnin but how can i create database , attach/detach database, write functions and so on...
thanx alot for the reply :)
Hi there,
I'm having some trouble with my MSDE2000 (version 8.00.194) and I'd appreciate any insight you could provide...
Long story short, I'm not sure what went wrong, but after stopping my SQL server to change DBs, it wouldn't start again. On the server, it showed no errors. In my services list, it said something along the lines of 'This service has no actions to perform, and so will not start'. It was a few days back, so I forget the exact message...
After restarting my PC, the service started without any errors, but my ODBC Connections will not find my SQL server. I get the following messages with the following scenarios:
Server: (local) : SQL server does not exist or access denied.
Server: . : Specified SQL server not found.
Server: 127.0.0.1 : Login failed for user <username>.
Server: <PC name> : Login failed for user <username>.
I have come across a similar issue before, where re-installing the MSDE sorted it out, this time however, I cannot uninstall the desktop engine: simply shows 'An error has occured during the installation' and nothing else after that. I also cannot apply any service packs, I get the same message as above. I have also tried upgrading to MSDE2005 (using company CDs on my PC at work), to be told that the installation has been blocked due to the following software: 'MSDE2000 8.00.194'.
For the record, I have also installed SP3 for Win XP... Not sure if that might be the issue? I somehow doubt it though. I tried a system restore to the day before the problem started, and it is still doing the same after a successful restore.
Help?!? Please? I need an SQL server for my work software to function correctly, I work in a busy call centre and I cannot get this fixed myself. I'm on the brink of formatting with a fresh install if XP.
Regards,
Andre.
I have side by side msde2000 and sqlexpress installed. I need to move a db that has been detached from msde2000 and where it works perfectly fine into sql express. After I select the .mdf file to attach I get this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'LTBAHIASQLEXPRESS'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
SQL Server detected a logical consistency-based I/O error: torn page (expected signature: 0x55555555; actual signature: 0x55555551). It occurred during a read of page (1:97) in database ID 6 at offset 0x000000000c2000 in file 'C:Memo2005DiaryMEMOinMEMOsql.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Converting database 'MEMOsql' from version 539 to the current version 611.
Database 'MEMOsql' running the upgrade step from version 539 to version 551. (Microsoft SQL Server, Error: 824)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=824&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Thanks for any help,
Luis
I just downloaded and installed MSDE2000 sp3a for winform and asp.net
quickstart tutorial. But I found it has no sample database such as pubs
and northwind. It used to have these databases. At least in last September
when .Net web Matrix came out.
If this is the case, can someone tell me where to get the sql scripts
to create Northwind database in MSDE?
Becasue the winform tutorial uses this database.
Thanks in advance!
Lei Xu
hi there,
i have following system:
the MSDN is running on a win98 machine,
the client-applications, which uses the DB are running on winXP.
there are (SOMETIME!) connection problems to the DB, i guess because of
connection timeouts.
unfortunately i can not change the system, i only can change some setting
or install additionally components such as MDAC.
what can i do,
please help me, it is a support case for a customer.
thank you very much.
mik
Hello !
I have installed msde2000A , but wanted to use Adventure Works database for which I am trying to install sql server express edition 2005 ,
But I want to install it w/o removing earlier msde2000A .
Is it possible.. I was guessing I could install 2 instances .
1st of mase200A and 2nd that of sql express edition 2005.
If it is poss , how to do that ? any other particular procedure / or normal install procedure .
Any one can help ?
Thanks
Bobo
I attempted to install MSDE on a WinXP machine(server) today. I installedfrom the command prompt as follows:-[color=blue]>setup INSTANCENAME="NetSDK" SECURITYMODE=SQL BLANKSAPWD=1[/color]Before I get 'blasted', I know that I 'really shouldn't' use a blank sa pswdbut.......I did :-)I then detached (sp_detachdb) an existing db from another machine. Moved itonto the new instance and reattached it.Finally, I executed the following scripts:-sp_addlogin @loginame = 'name', @passwd = 'password', @defdb = 'dbName'sp_grantdbaccess 'name'sp_addrolemember 'db_owner', 'name'So, this was fine and I could connect to the new db using either windowsintegrated security or 'name'/'password' BUT..BIG BUT, only at the server.When I tried to connect from a client I received an error message, 'SQLServer Does Not Exist or Access Denied'.I am assuming that all is well with the db and that it is something I havedone...or more probably not done with the sql server instance (as the errorsuggests:-). Can anyone please suggest my error?Thanks
View 3 Replies View RelatedHi,
i have a problem when i try to do an inplace update of msde2000 to SQLServer2005Express (adv.).
The following error message is displayed:
SQL Server Setup failed to execute a command for server configuration. The error was [Microsoft]
[SQL Native Client][SQL Server]Incorrect syntax near '='..Refer to the server error logs and Setup logs for detailed error information
Has anyone a suggestion to solve the problem ?
thank you in forward.
BR
Jürgen
Hi,
Recently when i try to upgrade my current MSDE 2000 (SP3a) to SP4, the system just keep on failing me. Here is the scenario:
1. Download the MSDE2000 SP4 from microsoft
2. Extract the SP4
3. Run the following command in either the command prompt or via a batch file:
echo off
echo "Start to Upgrade MSDE SP4 ... "
setup.exe /UPGRADESP SQLRUN INSTANCENAME=JSNG SECURITYMODE=SQL UPGRADEUSER=sa UPGRADEPWD=Th3B3st /L*v c:MSDE_Log.log
echo "SP4 Upgrade Process completed!"
4. Once the above batch file was runned, the standard SQL configuration screen (gathering information) will be triggered.
5. However after a while the installation will just stopped.
6. When i checked on the log, i have found out that the failure of installation is due to the system has failed to configure the server. PFB for the last few rows of the verbose log:
=== Logging stopped: 8/22/2006 17:36:49 ===
MSI (c) (90:88) [17:36:49:865]: Note: 1: 1729
MSI (c) (90:88) [17:36:49:865]: Product: Microsoft SQL Server Desktop Engine -- Configuration failed.
MSI (c) (90:88) [17:36:49:865]: Grabbed execution mutex.
MSI (c) (90:88) [17:36:49:865]: Cleaning up uninstalled install packages, if any exist
MSI (c) (90:88) [17:36:49:865]: MainEngineThread is returning 1603
=== Verbose logging stopped: 8/22/2006 17:36:49 ===
7. When i check the MSI Installer Event ID at Microsoft site, it just said that this is the server configuration problem and i cant find any solution.
Any forumers here experience the above before? Mind to share some thoughts?
FYI, my current MSDE configuration is as follow:
- MSDE 2000 Release A (SP3a - 8.00.760)
- Installed Instance = JSNG
Thanks.
regards,
JS
Has any one had experience with upgrading MSDE2000 with no instance to SQL2005 Express?
Thanks
ZS
Hi
I am using MS Access project as a frontend and MSDE 2000 as a backend database. I have few users and i want to give every one restricted access to database based on their use.
How can i create user accounts. I checked tools-->Security--> but workgroup admin option is not active. How to solve this puzzle
Thanks in advance
Neha
Can't connect from Win XPpro to named instance nor default instance on server running MSDE2000 SP3 via LAN (WORKGROUP). Works fine from Win 2K in the same network. Attached screen shot of error message. Osql gives the same response.
View 2 Replies View RelatedI am aware that instances of both can exist on the same machine.
But I assume that is when a different instance of SQL Server Express is installed with an existing instance of MSDE2000
Many moons ago, when the various flavours and betas of SQL Express became available, I upgraded from MSDE2000 - didn't think I would need it again.
I now have an application, Sony Vegas 6, which uses MSDE2000 for it's Media Manager. According to their support it won't install to SQL Server Express 2005.
When I try to install MSDE2000, it always fails with "Setup failerd to configure server..." and rolls back.
In the event log, there is an entry
The description for Event ID ( 19011 ) in Source ( MSSQL$SONY_MEDIAMGR )
cannot be found. The local computer may not have the necessary registry
information or message DLL files to display messages from a remote
computer. You may be able to use the /AUXSOURCE= flag to retrieve this
description; see Help and Support for details. The following
information is part of the event: (SpnRegister) : Error 1355.
I have down all the usual things like uninstalling SQL Server Express 2005 (using control panel and msiexec /x {GUID}), patching the registry etc etc
The result is always the same.
The Sony Media Manager is not important and I probably won't use it but it's annoying the hell out of me - I've always claimed, over a good few years, that there was no computer problem that I couldn't finally solve, but presently this has got me beat and I feel undone!!!!!!! :-)
regards
Stuart
www.mckears.com
I'm trying to install the MSDE2000 on window xp, sp2. During the installing, apperance the percent bar is rolling back, which is not even completed install. I had read the issue from microsoft to restart the server service, and...but no luck. Is there anyone has an ideas.
View 1 Replies View RelatedMy Problems & Situation:Hi! I am a ASP.NET starter. My platform is WinXP Home Edition and I haven't installed any version of SQL server before.I download different version of MSDE and extracted in my C drive separately, including: 1. Microsoft SQL Server 2000 Desktop Engine (MSDE 2000) Release A 2. Microsoft SQL Server 2000 Service Pack 3a (contained MSDE 2000) 3. MSDE 2000 for Developers Using Visual Studio .NETsince all of the above versions have the same problem when I try to install it.
The problem is that when I double click each of the setup.exe, it will show a pop up error:[A strong SA password is requires for security reasons. Please use SAPWD switch to supply the same. Refer to readme for more details. Setup will now exit.]
Then I found a solution from Microsoft, it told me that: 1. Run the setup in the command prompt 2. Locate in the extracted path 3. type --> "Setup.exe /qb+ INSTANCENAME=NetSDK DISABLENETWORKPROTOCOLS=1 SAPWD=<pwd>"
p.s. I have changed the <pwd> to 123abc
However....another Error Occur:1st pop up --> [Unable to determine system default collation.]2nd pop up --> [Microsoft SQL Server Desktop Engine Setup failed.]
My Question:1. Why the error still occour when I type that command to setup? (Solution from Microsoft)2. How can I fix it and complete the installation?3. How many users(maximum) can be created in a MSDE database?
Greateful if anyone can give me hand.
How do I add login user ASPNET to my SQL 2000 Desktop Engine Server?. I can not find the "Server Manager" in the Start - Programs. Is there any other way to get around adding ASPNET login to the SQL server so I can test my VB program. I got the error: Login failed for user 'com_nameASPNET'.
View 1 Replies View RelatedThe 6:th of march Sql server data tools for Visual Studio 2012 was released.
[URL]
I seem to be unable to install this using the link provided on the blog page. I'm getting a "Same architecture installation" error. Running on the machine is Visual Studio 2012 Premium & Sql Server 2012 (64bit).
why I'm getting this installation error.
I am trying to install SQL Server 2000 on a Win2K OS machine but Iget this error message:"A previous program installation created pending file operations onthe installation machine. You must restart the computer before runningsetup."I see others have had this problem but have fixed it using the solutionin:http://support.microsoft.com/defaul...kb;en-us;312995I have tried the solution but to no avail. The registry key:HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lSessionManagerPendingFileRenameOperations keeps reappearing as soon as Iclose RegEdit.Any ideas?Thanks,lq
View 3 Replies View RelatedPlease help,I am trying to install MSDE 2000 so that Backup exec will run on thisserver. I have gotten so far as to find an entry in my SQLSTP.TXT filethat says that c:mssql7 was detected so the install fails.Now, to start with there is no directory called C:mssql7 on thisserver. I have gone through all MS articles on manual removal of SQLserver and instances. I have searched the registry for mssql7 andremoved any keys that matched, as per MS article I have searched onSQLBOOT.dll and it is not present anywhere on my system and I still getthe same results.2:07:44 Begin Action: Detection12:07:44 SQL Server version already installed: 7.00.62312:07:44 Previous Install SQL Path: C:MSSQL712:07:44 Previous Install SQL Data Path: C:MSSQL712:07:44 End Action Detection12:07:44 Begin Action: ODBCLocked12:07:44 End Action ODBCLocked12:07:44 GetDefinition returned: 112:07:44 Previous SQL Server ProductType: MSDE [0x4]12:07:44 This combination of Package and Operating System allows a fullproduct install.can anyone think of anything here..what else could be causing the server to think there is a previousversion of SQL 7 on this box!!!?
View 1 Replies View RelatedI get an error when trying to install the SQL Native Client. It
says it cannot find the installation package and to use a valid copy of
'sqlncli.msi'. I've downloaded the Express setup twice and get
the same error from both of them.
I'm attempting this in a VMWare session setup for Windows 2K, Advanced
Server. I am trying to test my installation and setup
procedures. This is not a production setup, just install testing
and documentation. I have allocated only 272MB to the VMWare
session, which is why the system doesn't meet the recommended settings.
Any help would be greatly appreciated.
Below is the Summary.txt output file.
Microsoft SQL Server 2005 9.00.2047.00
==============================
OS Version : Microsoft Windows 2000 Advanced Server Service Pack 4 (Build 2195)
Time : Wed May 03 09:54:23 2006
CPCWIN2KVM1 : The current system does not meet recommended hardware
requirements for this SQL Server release. For detailed hardware
requirements, see the readme file or SQL Server Books Online.
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.2047.00
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : SQL Native Client
Error : An
installation package for the product Microsoft SQL Server Native Client
cannot be found. Try the installation again using a valid copy of the
installation package 'sqlncli.msi'.
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Failed
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SQLNCLI_1.log
Last Action : InstallFinalize
Error String : An installation package for the
product Microsoft SQL Server Native Client cannot be found. Try the
installation again using a valid copy of the installation package
'sqlncli.msi'.
Error Number : 1706
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.2047.00
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_MSXML6_1.log
--------------------------------------------------------------------------------
Hi every one,
I'd like to install SQL SERVER 2005 Express Edition ,I begin to install it from DVD but during the installation it dosn't ask me about any instance and after installation there isn't SQLExpress service and I can't use sql server .(there are not MSSQL and Binn directory in sql server 2005) but when I install visual studio 2005 and after that I install sql server 2005 it ask me for name of instance and with this way every thing is ok and I use sql server completely.
I 'd like to know the complete installation of sql server 2005 is depend on installation of visual studio 2005 befor it ?if not how can I introduce any instance after installation of sel server 2005 .
Hello,
Yesterday, to start SQLServer, I have used the DOS Command
setup SAPWD=xxx from C:sql2ksp3MSDE.
I think tne mix mode of authentification is correct.
But when I want to connect to the database by SQLEntMan, it doesn't work ...
How can I connect to SQLServer ?
Server adress = name of the computer
Username = ?
Password = password of windows ? password of of SAPWD ?
Thank you any help
Ben
Hi, I ama trying to install SQL Server Express 2005, when the setup.exe does an anlysis of the machine configuration it tellme that out of 10 checks one has failed, and that the machine needs tobe rebooted in order to fulfill a requirment from a previous installation, I did this and went to start the installation process again only ot be told that this check failure still exists, unfortunately I cannot progress, has anybody experienced this, I am using Windows XP Hone, with ASP.NET 2.0 installed and Web Dev Express 2005 Beta 2Looking forward to hearing fom you
View 3 Replies View RelatedI am trying the SQL 7 STANDARD installation on WIN`98. However, it creates the directory structure on the hard-disk alonwith files but on connecting to server it comes out with a VC++ assertion failed message.
The TCP/IP sockets are being used and the TCP/IP port (local ping) is working fine. Windows 98 was installed again and there are no prequisites for SQL 7 on 98 but the problem persists !
Anyone who has installed it on WIN`98 ?
TIA
Raghu
I have problems after installation in W98 of the Desktop.
In Enterprise Manager when I try to connect to the server gives the following error:
Assertion failed!
program c:windowsmmc.exe
file: ../src/sqlsspi.c
line: 119
Expression: Count
after I click on RETRY and gives the error:
a connection could not be establish to TEST05 - [SQL-DMO]code execution exception:
EXCEPTION_BREAKPOINT.
Please verify SQL SERVER is running and check your SQL Server registration properties and try again.
I check, and in Service Manager is TEST05 - MSSQLServer - running.
Also in Query Analyzer gives an error:
Assertion failed!
program c:mssql7innisqlw.exe
file: ../src/sqlsspi.c
line: 119
Expression: Count
after I click on RETRY and gives the error:
This program (ISQLW) has performed an ilegal operation and will be shutdown
ISQLW caused an exception 03H in module MSVCRT.dll at 0177:7800...
Where is the problem? From wrong installation or W98?
The installation CD was camming in the book :
"Special Edition" - Using SQL SERVER 7.0 from Stephen Wynkoop.
Please reply,
Tanks.
Hi:
We ran SQL Replication in Production SQL 7.0 with SP1. We encountered some problems. We ran the same tests in QA which used SQL 7.0 with SP1. The problems were gone.
Both Production and QA used SQL 7.0 with SP1 but they came from different resource CDs. Production one was installed from Microsoft Select CD in 1998. I did not recall the CD which was used for QA.
It indicated those two SQL 7.0 functioned differently and Production on had a bug in it. Can somebody to share with me a detecting tool and a criteria to find out where is wrong in the Production SQL 7.0?
Thank you.
Joan
Hi,
I am having pentium 3 with windows 98 I had Sql Server 7 installed But due to some problem i uninstalled it.
I am having difficulty in reinstalling the same i uninstalled completely and even removed entries in registry and tried to install But i am getting the same error always.
1)Acmsetup failed
2)setup failed to configure the server Refer to the server error logs and cnfgsvr,out for more information
There is nothing in server error logs
cnfgsvr.out file looks like this
Starting Service ...
An error occurred while attempting to start the service (1460)
SQL Server configuration failed.
What is ACMSETUP what it does how i can prevent its failure is the failure of ACMSETUP a reason for sqlserver set up failure
I appreciate ur replies
I have installed sqlserver 2000 (desktop edition) on my pc at home. I am running windows xp home edition. what i am finding is i am not able to log in to either Enterprise Manager or Query Analyzer. I have tried using different accounts during installation.
The service has started and the server seems to be running, but I cannot make a connection.
any suggestions,
thanks,
jim