Multi-value Parameter In Master Report Passing To Single Param Sub-report In A List.
Aug 20, 2007
Here's tricky one.
I have a fairly complex report that was given to me that was hard coded for single parameters. There is a dropdown for each market (created from a query in SSRS). The users have to run for each market each week.
Is there a way to use this report as a Sub-report inside a list of a master report and then use a mult-value parameter?
I want this multi-value parameter to build the values for the list and then run the "sub-report" for each value.
Essentially, I want to create a for each loop.
Any ideas?
View 4 Replies
ADVERTISEMENT
Nov 5, 2007
How do I display multiple parameter values on report page from a multi-value report parameter. For example, I have a report parameter where users can select multiple attendance codes and I want them displayed at the top of the report after it's run.
Currently, only the first value is showing on the report.
Thanks.
View 1 Replies
View Related
Jul 29, 2015
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chartÂ
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
View 2 Replies
View Related
Jan 30, 2007
I am designing a report which will be used under the subreport control of a master report, now i am using a stored procedure for the subreport which has two parameters.
In the subreports dataset parameters tab, how can i mention the master reports columns, since i do not see the master reports columns here. since it is a different report.
If i use a hardcoded select query then i can just say
select address, city, state, zipcode from customer where (customerid = @customerID)
but i am using a stored proc. how to define the parameters under datasets parameter tab.
Thank you very much for the information.
View 2 Replies
View Related
Jul 2, 2015
I have a sp where query is as below.
DECLARE @ServerCIName varchar(5000)
SELECT * FROMÂ dbo.INC
WHERE Status in ('Assigned','In Progress','Pending')
and Description like '%' + (Select * from SplitDelimiterString(@ServerName,',')) + '%'
and (select DATEADD(dd, DATEDIFF(dd, 0, (Submit_Date)), 0)) = (select DATEADD(dd, DATEDIFF(dd, 0, getdate()), 0))
In place of "and Description like '%' + (Select * from SplitDelimiterString(@ServerName,',')) + '%' ", if I use "and Description like '%' + @ServerName + '%' " and pass a single value, it works.
But @ServerName contains multiple values and it is dynamic (not constant).
How do I query the data?
View 6 Replies
View Related
Jan 9, 2007
Request is to have a Requirement number from the requirement form generate a report in Reporting Services with the requirement number as a filter.
I can set up the parameter - how does the value get there? Should I be asking this question in the Visual C# group?
Thanks!
Terry B
View 1 Replies
View Related
Dec 29, 2006
Hi,
I want to give filtering criteria in my SSRS report.
I have drop down list control having list of Email's of clients.
So, how can i pass the value of the particular Email id in my SSRS report using Report Viewer control?
How can i pass user input as parameter in my report using visula studio 2005?
Thanx,
Ruja
View 1 Replies
View Related
Aug 14, 2006
Hi All,
I have a question, How to user the Multi value in Visual Studio Report Designer.
My dataset contains the following
Select empno,empname,basicpay,deptcd from employee where deptcd in (substring(@gdept,1,4))
Here variable gdept is the report parameter. I am passing the value.
it works fine with single value.
( the source of gdept is a another dataset to list the deparment code+name,
Example
DEP1 - COMPUTER
DEP2 - ADMIN
DEP3 - FINANCE
)
when I preview, i have a combo box to select the department.
If I choose one deparment, it works fine.
If I choose more than one department or select all I have error message
"substring function requires 3 aruguments."
what is wrong is the query
Please advise.
Cheers,
Saleem
View 1 Replies
View Related
Dec 1, 2005
I have a rs report with a parameter(named Site) that is defined as multi-value. What I am trying to do is call the report from an html form with the parameter populated with a comma seperated list of values. The html code is a minimally modified version of the code found in ch. 11 of the hitchhikers guide(code included below after the solid line). If I don't select any items, then execution is fine.
View 6 Replies
View Related
May 16, 2007
I have two subreports on one master report who's parameters @ReportDate would be set to the same date each time the report is run. When i run the master report i get an error for each report that tells me that one or more parameters required to run the report have not been specified. How do i pass the parameter i want to use in both reports from the master report through to the subreports.
Thanks again!
View 3 Replies
View Related
Mar 22, 2007
I have a parameterized main report that contains a link to a sub report with parameters. Then from the sub report I have a link that takes you back to main report. If I use multi value parameters or single value parameters the links going back and forth between the two reports works just dandy, when I run it on my PC. However when I deploy the reports to the Web Server, the link going from the sub report back to the main report only works if the parameters are single select. Going from the Main to the Sub it doesn€™t matter.
This is the error I get using multi select parameters going from the sub report back to the main.
The path of the item "(null)" is not valid. The path must be less than 260 characters long and must start with slash. Other restrictions apply. (rsInvalidItemPath)
Any suggestions?
View 1 Replies
View Related
Feb 1, 2007
HI there.
I have been working on this for quite some time and I can not figure out what I am doing wrong.
I have a report filter called ItemFilter and I have declared as a report parameter where the multi value checkbox is checked. The values from this filter are coming from the item table.
SO the users drilldown on the filter when they run the report an select the Items that they would like to display info for. I had the following code before in the where
where
([CRONUS International Ltd_$Item].No_ = @itemfilter). This only worked if they selected on item from the list.
I want them to be able to select multiple Items or all. The code above did not work because there were commas separating one item from the other and I was getting an error.
I changed to
whrere
([CRONUS International Ltd_$Item].No_ IN (@itemfilter)).
Now this only returns the first item that I enter on my Itemfilter parameter.
Does anyone have any clue in regards to this ?? I am sure I am using the wrong syntax, but I do not know what to change it too.
Thanks
View 1 Replies
View Related
Nov 8, 2007
I am experiencing a problem that has been posted a number of times but cannot find a solution. Passed linked report parameter value through URL:
Jump to URL:
Code Block="javascript:void(window.open('http://myservert/Reports/Pages/Report.aspx?ItemPath=/Sales/Enquiries/Order+Enquiry&rs:Command=Render&Cust="+Fields!Cust.Value+"'))"
When I click the link I am taken to the report but it is waiting for me to enter a parameter. I can see the parameter in the url address and it looks correct. I also tried Parameter!Cust.value (which has the same value as Fields!Cust.Value) but get the same result.
The target report has the correct name parameter: Cust. In any case, when I use "Jump to report" instead, it works correctly - although I don't see the parameter value in the url.
Any advice appreciated.
Thanks,
SQL Servant
View 20 Replies
View Related
Sep 21, 2007
Hi all
Basically I had 2 paramater which ComputerName and MemberName.
The membername was set as Multi-Value as sets as follow:
Label: Value:
Exclude Domain Admins Domain Admins
Exclude Local Install Local Install
And the query is:
SELECT id,
ComputerName,
GroupName,
MemberName,
ScanDate
FROM GROUPMEMBERS WITH (NOLOCK)
WHERE ComputerCN LIKE '%' + @ComputerName + '%'
AND MemberName NOT IN (@MemberName)
ORDER BY ComputerName ASC
The prompt is like this:
Computer Name [ ] Excluded by [ ]
The issue is in the second prompt I have to select
"something" which is I don't want to. I want the user to have this parameter as an optional.
Any ideas?
Thanks
View 2 Replies
View Related
Mar 18, 2007
Hi all. Is it possible to pass parameter FROM Report to my windows application(C#) ? Report is made in Business Intelligence Project. I just want to retrieve the total row number to my windows appication. Is it possible? If yes, Can you provide codes for this? Thanks. Your help would be highly appreciated.
-Ron-
View 4 Replies
View Related
Feb 29, 2008
I am trying to create a drill-down report by passing the Customer ID number to the drill report. The 'parent' report is a tabular report, as is the 'child.' As long as I used the numeric Customer ID, the child report returned no rows from the passed parameter. However, when I use the Customer Name instead, the child report functions correctly.
Here is the parameter as passed using the Customer ID:
[Customer Hierarchy].[Customer ID].&[70011231]
Can anyone shed some light on why this wouldn't work?
Thanks,
nanc
View 2 Replies
View Related
Apr 21, 2008
I have a string report parameter called @name. In my script, i have and a.name like '%@name%' but it returns no rows. I tried removing the '% but still doesn't work. What is the correct way to script this?
View 3 Replies
View Related
Apr 1, 2008
I know this is the code to add a single valued report parameter to a report via asp.net
Dim paramList As New Generic.List(Of ReportParameter)
paramList.Add(New ReportParameter("MyParameter", "MyValue", False))
Me.ReportViewer1.ServerReport.SetParameters(paramList)
But how do I go about adding a multi valued parameter?
View 8 Replies
View Related
May 8, 2007
Hi, I have found this question asked many times online, but the answers always consisted of getting a parameter from the user and to the report. That is NOT what everyone was asking. I would like to know how to pass a parameter I already have into my stored procedure. Using Visual Studio 2005, in the "Data" tab of a report calling something likeUnique_Login_IPsreturns correctly when that stored proc takes no params, but when I have one that takes the year, for example, I do not know how to pass this info in. Note: the following does not work in this context : EXEC Unique_Login_IPs ParameterValue nor does EXEC Some_proc_without_paramsVisual studio seems to want only the procedure name because it returns errors that say a procedure with the name "the entire line above like EXEC Unique_Login_IPs ParameterValue" does not exist.... Thanks in advance,Dustin L
View 1 Replies
View Related
Jan 18, 2007
I have defined a monthly substription for a series of reports. I would like to be able to pass a paremter used in generating the report to the file name define in the subscription.
I can do it if I used system names such as @datetime, but I want to be able to use a parameter unique to the report.
For example if the parameter for the report was CARS and I was quesrying Toyotas how can I get toyoats to show up in the file name?
Any suggestions?
View 1 Replies
View Related
Mar 24, 2008
Hi all;
Could any body tell me as to how I would be able to pass report grouping in drill through report.
Please review the diagram below to better understand my problem
Report 1 (Summary) Columns1 Column 2
Row-1:Grouped by attribute X Calculation based of dates Calculation based of dates
Row-2: Grouped by attribute Y Calculation based of dates Calculation based of dates
The Drill thru option should be present in all of the columns; so that, when any of the numbers in the column are clicked it should drill through to another report which should show all the records pertaining to all the values in X1
Report 2 (Details) Report 3 ((Details)
X1 Y1
X2 Y2
X3 -
X4 -
X5 -
- Yn
-
-
-
Xn
What I did so far was to pass the report parmeter in report 1 as "Fields! attribute X ,Value" and same for Y
The problem with is that only the first value of the group that satisfies condition gets passed on to the detail reports. Kindly let me know were I am going wrong and what should I be doing.
Awaiting your opinions
Thanks and Regards
GM
View 4 Replies
View Related
May 25, 2015
I am trying to pass more then one parameter from URL , Below is my URL
="javascript:void(window.showModalDialog('http://in-mh-co-dt0030/ReportServer_SQLSERVER2012TAB/Pages/ReportViewer.aspx?%2fTest%2fProduct_WiseV1.0&rs:Command=Render&Lob="+Fields!Line_of_Business.Value+"&Year="+Sum(Fields!Year_list.Value,
"Year_Param_DS")+"', ''))"Â
 Lob parameter is in the same dataset , But Year parameter is from different Dataset(Year_Param_DS).But If I am passing second parameter (Year) like Sum(Fields!Year_list.Value, "Year_Param_DS") i am not able to open the popup.
If i am removing the sum word Main report is giving an error that "Report item expressions can only refer to fields within the current dataset scope or, if inside an aggregate, the specified dataset scope."e syntax (I am working using MDX query) to pass two parameter through url, one from same dataset and 2nd is from another dataset.Or it is not possible to pass the value field from other Dataset in URL (Go to URL option).
View 2 Replies
View Related
Mar 31, 2006
I have a Report that I want to access that has a parameter input for the date, Production_Date. I want to allow the user to use the DateTimePicker to select the date to use for Production_Date. I can't seem to find the correct way to format what I'm tring to do. My production date field is in a format without punctuation so that it becomes:
Dim ProductionDate = ((DateTimePicker1.Value.Month * 1000000) + (DateTimePicker1.Value.Day * 10000) + DateTimePicker1.Value.Year)
which gives me a value that I want to send as a parameter for the Reporting Services report that I have located on a tab in my project. The report is:
Me.ReportViewer1
I want to send the ProductionDate to the report where the report looks for Production_Date. Obviously, I 'm very new to this. I'd appreciate any suggestions. As it runs now, the default date is loaded (today's date) from the expression I calculated in Reporting services:
=(Now.Month*1000000)+(Now.Day*10000)+Now.Year
This is a big roadblock right now and I can't seem to put together a legal means to pass this value. Thanks for any help.
View 8 Replies
View Related
Feb 19, 2008
I am trying to figure out a way to toggle the visibility of attribute data based on a parameter. Specifically, I have a report that has many columns that an end-user may not want to see, depending on what they are using the report for. I know you can toggle visibilities on individual columns easily enough, however I want the user to be able to select which fields (at the attribute level) they want visible on the report up in the parameters, via a multi-value prompt.
Is this possible with reporting services 2005?
Thanks.
View 9 Replies
View Related
Mar 19, 2008
Hi All,
I have a report parameter which i multivalue. I want to display the selected value in a text box. I have written the following code :
=Switch(Parameters!ServiceAttribute.Count = 1,Parameters!ServiceAttribute.Value(0),
Parameters!ServiceAttribute.Count = 2,(Parameters!ServiceAttribute.Value(0) & ", " & Parameters!ServiceAttribute.Value(1)))
Which suggests that if only one of the two multivalue parameter id is selected display the same (Parameters!ServiceAttribute.Value(0)).
This works fine when i select both the attributes but throws an exception "Index was outside the bounds of the array" when i select only one of the parameters. Can anyone help me with that?
Also i want this report parameter to allow null i.e. if a user does not select anything he should still be able to view the report.
In case of regular dropdowns i have added a <Null> value to the existing values and set the default to null. But in case of multi-value, it does not give an option of adding <Null>
View 5 Replies
View Related
Nov 30, 2007
I need to use a non-queried report parameter to filter a dataset for a report.
The dataset column I'm filtering is numeric. The dataset is not a sproc, it's a table in SQL Server that I am querying.
The Non-queried parameter values (Multi-value) are 1, 2, 3, 4, 5, >=6.
Selecting the >=6 throws the error: "Error converting data type nvarchar to numeric."
Which sucks.
Because...when I go straight into my dataset I can filter my numeric column with the exact same values (=1 or =3 or >=6) and everything works fine. The error is only raised when I use the @Parameter in the dataset.
I've tried eveything, researched everywhere online and I can't find any guidance anywhere.
View 10 Replies
View Related
Jul 2, 2015
I'm building a report and I want to have a parameter that has multiple integer values (not text).I can get it to work just fine if I create a value for each and every numeric value, but I want the user to only see two choices in the dropdown menu (plus the "Select All" that gets automatically created when I tick the box for "Allow multiple values"). How can I make this work?
For example, for my TYPE parameter I'd like something like this:
Label: Tigers
Value: 2
Label: Lions Bears Oh My
Value: 1,3,4,5,6
But I can't seem to set a multiple Value for an integer. And I can't seem to wrap the value with quotes and use Text as the Data Type because it says an error occured during processing (I assume because the field I'm going against is of the Integer format).My query would look something like this (the real one is a lot more complex):
SELECT
v_R_System.Netbios_Name0
,v_GS_COMPUTER_SYSTEM_EXT.PCSystemType0
FROM
v_R_System
INNER JOIN v_GS_COMPUTER_SYSTEM_EXT
ON v_R_System.ResourceID = v_GS_COMPUTER_SYSTEM_EXT.ResourceID
WHERE
v_GS_COMPUTER_SYSTEM_EXT.PCSystemType0 IN (@TYPE)
I've tried different Expressions, filters, options, syntax, and what-not, but I think I'm missing something basic.
View 2 Replies
View Related
Sep 28, 2007
Hi All
New user here. I've got a report with a couple of multi-value parameters and I'm displaying the selected values on the report using = Join(Parameters!ReportingGroup.Value, ", "). This works properly.
The users now want the report to display "All" if "Select All" is chosen, rather than showing the whole list.
Can anybody help me with this? I'm thinking of using an IIF statement in my expression, but have no idea how to define the condition?
Thanks in advance
Grant
View 3 Replies
View Related
May 2, 2008
Hi All,
I'm having trouoble with changing my report name when I swtich to different parameter values.
I use the following expression.
IIf(Parameters!GroupVar1.Label = "CBank", "CBank", IIf(Parameters!GroupVar1.Value ="DTC","DTC","Total"))
This works fine when I clear Mutli-Value box in paramter properties. but when I use multi-value, this does not work.
Is there any solution for this?
Thanks
View 1 Replies
View Related
Jan 22, 2007
Hi All,
Is there is any way to display the User selected parameter information if the parameter is multiselect ?
I was able to display if the parameter is single valued but if it is multivalued (list), i was not able to .
Any help is greatly appreciated.
Regards,
View 8 Replies
View Related
Dec 13, 2007
it looks like a multi value parameter is the only kind of parameter that displays a checkbox.
A single checkbox for yes/no parameters are more intuitive to my users than 2 choices from a query.
I tried to set the multi value attribute on such a param but at run time get errors from a couple of places 1) expressions that reference such a parameter, seemingly confused about the value field being allowed to be either an object or an integer 2) unchecking the checkbox causes a prompt demanding that a value be set.
Does anybody have a trick or see what I am missing in trying to make a parameter act like a single yes/no checkbox in just one line of a dropdown parameter list?
View 3 Replies
View Related
Jul 13, 2007
All,
I have two reports in my project. One is summary and the other is drill through. In Summary report I have StartDate and EndDate Parameters which are DateTime type. Language settings on my workstation are set to Canadian English, and so are in the IE. When I deploy the reports to the Sharepoint WebParts based reporting portal, the reports run fine individually. However, when I try to drill through from summary report to the detail report, the following error is displayed, where the StartDate is 13/07/2007 (Canadian format dd/MM/yyyy):
The value provided for the report parameter 'StartDate' is not valid for its type. (rsReportParameterTypeMismatch)
Why do the reports run fine individually? Obviously something is wrong with Report Server processing the parameters, that it converts the date format to US English only when passing parameters to drill through report. This problem is eliminated when I change the language settings to US-English on my workstation.
Any ideas how can this be fixed, if at all? It would certainly be not feasible to have all the users change their settings from Canadian to US-English.
Thanks.
View 6 Replies
View Related
Jul 9, 2007
Hi,
There is a .net application which has a screen with four options(text boxes)
Each of these should take to reports generated by SQL REp Services
This is the requirment
The School selected in the App should be passed on to the report
How should I pass the parameter in my report
so that when user selects a link or text box report for that particular school number is displayed
Thanks
sowree
View 3 Replies
View Related
