The log for our SQL 2000 database shows constant "starting up database dbname" entires. Is there a option that causes the databases to constantly be starting or is this a new feature of SQL 2000.
View 1 RepliesThe log for our SQL 2000 database shows constant "starting up database dbname" entires. Is there a option that causes the databases to constantly be starting or is this a new feature of SQL 2000.
View 1 Replies View RelatedHi,
I need help desperately. The following is an example of the data that I have.
I have two tables one name Customers and the other named Orders. The tables have the following attributes
CUSTOMER
CustomerNum, CustomerName, OrderNum
ORDER
OrderNum, OrderDesc, CustomerNum
Bare in mind that the CustomerNum can have multiple customers attached to it, example a whole family (I know bad database design but it's too late to change) Let's use the following info for the tables respectively
CUSTOMER
0001 Sharon Bigbsy 1234
0001 Dale Bigbsy 1235
0001 Omar Bigbsy 1236
ORDERS
1234 Chips 0001
1235 Gatorade 0001
1236 Candy 0001
The query i'm using is select Customer.CustomerNum, Customer.CustomerName, Orders.OrderDesc from CUSTOMER, ORDERS where CUSTOMER.CustomerNum = ORDER.CustomerNum
The results are as follows
0001 Sharon Bigbsy Chips 1234
0001 Sharon Bigbsy Gatorade 1235
0001 Sharon Bigbsy Candy 1236
0001 Dale Bigbsy Chips 1234
0001 Dale Bigbsy Gatorade 1235
0001 Dale Bigbsy Candy 1236
0001 Omar Bigbsy Chips 1234
0001 Omar Bigbsy Gatorade 1235
0001 Omar Bigbsy Candy 1236
It's giving all the orders place to each customer name but I need only the following
0001 Sharon Bigbsy Chips 1234
0001 Dale Bigbsy Gatorade 1235
0001 Omar Bigbsy Candy 1236
I'm using SQL in MS Access 2003. Please disregard the abnormalities of the tables, it's someone else's work I inherited with over 6000 entried.
Any help will be greatly appreciated
Ok,In one table, I need to find all instances of multiple entries of aninvoice number in the column InvoiceNumber.For example, there may be more than one entrie of 321, 567, and 987in column InvoiceNumber.321 skin care product321 vitamins321 bottled water567 rubbing alcohol567 dental floss987 fabric softener987 tissue paper987 marlboro cigarettsAny help is appreciated.Thanks,Trint
View 2 Replies View RelatedHi All,
I'm using Microsoft SQL Server Management Studio with SQL Server 2005 (SP2).
I have not had much experience with t-SQL and iterative logic implementation through SQL, therefore I think my problem is fairly basic for most of the pros here.
Here it goes...
I have two tables at hand, TestTab1 and TestTab2.
TestTab1 contains two attributes (columns) namely account_name (nvarchar(50)) and entry_count (int). For all rows in TestTab1, account_name is unique, i.e. for each account_name there is only 1 row in TestTab1. This is my source table.
TestTab2 contains one attribute namely account_name (nvarchar(50)). This table is empty and is my destination table.
I need to insert X entries (rows) for each account_name into TestTab2 where X is the int value in entry_count againt each account_name in TestTab1.
In other words, I need to insert account_name into TestTab2 as many times as the number in entry_count indicates.
I tried reading through the documentation but the help was not friendly enough for me to understand how to implement this.
Looking forward to the pro support.
Thanks,
Very basically, I need to return a result set based on another value and only if there are multiples of that other value.
Example. select * from mytable
Returns (--column separater)
John---1---1
John---1---1
John---2---2
John---3---3
John---3---3
John---4---4
So I want a query that would return only
John---1---1
John---1---1
John---3---3
John---3---3
The query cannot be something as simple as this:
Select * from mytable where John=1 or John=3
I have to many possible results to plan like that. I am thinking some kind of aggregate with a group.
Looking for returning multiple entries from a time span. I have a date, start-time, end-time and duration. I need the start-times separated in a list. It's fine if temp tables are needed - I have that clearance.
Entry might look like:
(datetime) date: 7/10/2014
(int) start-time 820
(int) end-time 1000
(int) duration 20
The result would needed:
(datetime) 7/10/2014 08:20:00
(datetime) 7/10/2014 08:40:00
(datetime) 7/10/2014 09:00:00
(datetime) 7/10/2014 09:20:00
(datetime) 7/10/2014 09:40:00
I am trying to find books which have the same title and publisher name as at least two other books and need to also show the book ref (ISBN number). I have the below script so far:
SELECT isbn, title, publishername
FROM book
WHERE title in (SELECT title
FROM book
GROUP BY title
HAVING count(title)>2 or count(publishername)>2)
order by title;
This is a snap shot of the output:
ISBN Title Publishername
0-1311804-3-6 C Prentice Hall
* 0-0788132-1-2 C OSBORNE MCGRAW-HILL
* 0-0788153-8-X C OSBORNE MCGRAW-HILL
* 0-9435183-3-4 C Database Development MIS
* 1-5582806-2-6 C Database Development MIS
[Code] ....
What I should be seeing is only the ones I have put an * next to. What am I missing from the scrip?
I work for an organization that repairs serialized devices. Each time a device is repaired it's serial number is recorded in a database table along with the date it was repaired along with other information about the device. There are multiple cases where a unit has been repaired more than once.
I am trying to write a query that will return the serial only once and that record will be the record of the latest repair date. To sum it up,
Return a list of serials where if a serial exists more than once in the table, return only the instance of the serial record(s) with the max(created_dt). The end result will be a list of distinct serial numbers.
Here is my Query. The problem I believe is in my sub-query but I am not sure how to structure it.
SELECT
S.Id
, RMA
, PinSerial
, L4Serial
, L4Model
[Code] ....
Installed evaluation copy a while ago.
Yesterday got a new server and wanted to detach and move the database from old server. However, SQL server will not start on old server.
New server runs SQL 2000 Enterprise edition.
How do I get my old database detached and moved?
Your advise is appreciated.
My SQL2K was running fine. Yesterday, I decided to install SP3a. During the installation, it failed when apply sp3_serv_repl.sql. And I can't start SQL server anymore. The error is :
FRunCM : Process <> generated Fatal Exception C0000005
Exception Access Violation - SQLServer is terminating this process.
No matter what I did, I couldn't start the service again.
SO I decided to uninstall SQL2K and install again. Installation is ok, no problem. But, again the SQLServer service cannot start up. The same error appeared. Besides, there is also the error about :
Supersocket Error 1355.
I have tried all the suggestions that I can find in the net but nothing seems to work.
Please advise what should I do. Thank you very much.
Philip
Where to start.
I have my 2005 CD ready and server.
So i will install 2005.
How do i start migrating SQL 2000 to SQL 2005 (on our SQL 2000 some of the databases cannot be converted to 2005 as the vendor is not ready.
Is there a way to do each database one by one.....(If so if anyone got any recommendations on how to start this i appreciated it).
Thanks
ver: SQL-DMO Version: 8.00.760I have the option to automatically start SQL Server on startup, butwhen it does start up, the SQL Server Service Manager does not havethe green arrow indicating that it is active. When I double-click itto display the SQL Server Service Manager, it shows the name of theserver, but no services in the drop-down box.When I start Enterprise Manager I see an instance of MSDE wheresomeone installed an MSDE application. That is active. But I have to"connect" to the localhost. The instance name is the name of the MSDEapplication. I would like it to connect to the localhost on startup.Any ideas on how to correct this problem?Thanks,RBollinger
View 2 Replies View RelatedHi
We have a demo version of our SQL2000 application that uses MSDE. This has always worked sucessfully in the past.
However, at the most recent installation however there is a problem which I cannot seem to fix.
MDSE was installed on Windows 2000 using the Local Admin account.
When the user logs on to the PC, SQL will not start gives error message '5 Access Denied'.
I have given the local user read/write permission to the Data directory and mdf/ldf files that it contains.
I have tried starting SQL specifiying it to log on using the Local Admin account but it makes no difference.
Does anyone know what else can I do?
Thank you
Mark
Please feel free to redirect me if this has been previously addressed. I've read through the FAQ post and searched the forums, and as yet haven't found anything relevant on Google so I'm hoping you folks can help.
I am using SQL Server 2005 Express Edition on a fully patched Windows 2000 Server, and for some reason the database just will not start up when the machine starts or reboots. The service starts fine if I go start it by hand though. This is obnoxious because it prevents me from running fully automated updates to the box since that reboots it at least once a week on "patch Tuesday".
Here are what my related services and their startup types look like:
SQL Server (MSSQLSERVER) Automatic
SQL Server Active Directory Helper Disabled
SQL Server Browser Disabled
SQL Server VSS Writer Manual
This is a production machine so I'd prefer not to run any services I don't have to. All this database needs to do is sit there and get hit by a local Cold Fusion instance that talks to it by TCP/IP. Any administration on it I tend to do locally with Management Studio Express by remotely logging into the server on it's internal IP.
The really weird thing is, I have these services configured exactly the same on development environments I've created in Windows XP and Windows 2003 Server Standard Edition. This seems to be specific to Windows 2000 Server, and I just can't figure it out...
Any advice much appreciated!
Hello,
I had created a windows service using C#. I set its Startup Type as Automatic but it is not getting started automatically when my System Starts.
Hi, I've been trying to write an sql statement that can output the 10 minimum entries from a database, but I can't figure out how to do it.
Any help?
If I wanted to search for Jobs as a particular status (e.g. 0130) and wanted to keep the jobs at this status until it has reached 0500, 0125, or 0900 in it's subsequent status log entry, how can I write the SQL for it to achieve it?
I have the following SQL which searches for the Jobs at 0130, but don't know how to develop it further to search on the requirement above.
------ SQL -------
SELECT
job.job_number,
(SELECT MAX(jsl.job_log_number)
FROM job_status_log jsl
WHERE
job.job_number = jsl.job_number AND
jsl.status_code = '0130') as Last_Early_Warning_Status_Entry
[code].....
In the job_status_log table above, there is a job_log_number field which increments by 1 when there is a new status log entry.
Hi all.. I've been scouring the forums for about 6 hours to no
avail. This is a really simple question. I'm trying to have
a registration page that lets the user input name, email, desired
username, and password. I want to check the username and email
fields to make sure ppl cannot sign up twice. So from what I've
gathered I have a couple of options:
1) i can set up a unique constraint on the database columns,
2) i can run a select statement before inserting,
3) i can store the whole database column in a variable then search through it.
My question is how to do option 2? All of my transactions are through a sqldatasource object in c#.
Hi,
Is there a way to link an Access 97 database to a SQL database which would get updated as changes in the Access 97 database take place? In fact, the SQL database will be just a copy of an Access database. If there were changes made to the fields in the Access database these changes should be made to the entries in the SQL database as well.
Thank you,
Misha
Hi everyone,
I just found out that one of my user database was missen from the sysdatabases entries. The database was missen from the EM and I queried the sysdatabases table but found nothing. The data and log files are intact in the hard drive directory.
Is this a bug or what?
Osas
Hi folks, sorry for the poor explanation.
Im using SQL 2000
I have a database that has a column named 'Initials' in a char in field
I want to be able to return in a query the highest entries if an indiviuals initials & count from the table, so it would display some like this
Initials Count
DRT 51
AMS 49
JJJ 21
PLI 10
Hope u can help, thanks in advance
I have a report that accepts a list in the filter and searches the data base for the items in the list. How do I get the result to include all items in the list even if they are not located in the database? Thanks.
View 4 Replies View RelatedWhen our rep distribution services time-out (several times a day) some dba's just restart the service while others restart the rep job which starts the service. Are there any differences between these two methods? Does restarting the service inherit any changes made to the job's attributes?
Thanks!
OK, I've been looking and maybe there is an answer to this somewhere, but I haven't seen it.
I've got a database that has as its status "Shutdown, Normal". All the other DBs on my machine are "Normal" as status. The problem is that the one that is shutdown is the one I really need to be executing in. How do I start it?
Thanks!
Jeff
Hello,
How can I delete duplicate entries from tables in my database using Query Analyzer, as there are many duplicate entries in my tables, I want to delete them.
Thanks in advance,
Uday.
Hi,
I would appreciate any help or suggesions on starting with database design for an asp.net site.
I know this question maybe sounds silly but I feel stuck and don't know where to start.
Yours sincerely
Andla
Hi,
I have a SQL2k STD with SP3 installed.
Currently, only one database db_XYZ is there. The server has been started up since 07/03/2003 16:00 pm. But in the sql server current log: "Starting up database 'db_XYZ'." info is spreading from that time (16:00 pm) to this morning 10:00am at an interval from every 1 minute to 4 minutes.
Why need to 'Starting up' this database so much times?
This reminds me that this 'Starting up' is kind of 'abused' in many other servers. Any idea?
thanks
David
OK, I am experienced in VB6 but new to SQL.
And I want to use SQL for my database for some software I develop.
I have understood the basic principles how to communicate with a data base using SQL. What I have not understood is how I start a new database for SQL, subject SQL as such is installed on the server. But how to initiate a new data base?
Will really appreciate help with this.
Per Oberg
Hi,
I've got a sitatuation where one of our sql databases appears to be frequently "starting". The log entry looks like:
Starting up database 'Database'.
And seems to occur at irregular intervals and does not seem to be inline with any other db activity....i.e. transaction log backups, insertions or reads.
This DB is fairly busy receving inserts from our PBX CTI software almost constantly.
Note this is the only DB on the server displaying this behaviour (we've got two named instances running with several databases in each).
Any help / pointers appreciated.
Rgds,
SLE
We have SQL 2000 (SP2) , Our SQL server agent showing green light as started from EM , It is succussfully restarting from NT Services too . But When I open the properties of the jobs from EM its gives error message SQL DMO error " SQl Agent is starting , try later " . And in EM Next run Date & Time not available .
MDDB database is accessable & in Log file its recovered fully
Thankx in Advance
Sha
SQL agent is using NT login with all permission & agent and sqlserver using the same NT username . SA password has not been changed for more than one year.
The SQL Server agent log is showing "waiting to recover database". What could be the reason ?
------------
Ray Miao at 6/5/2002 8:13:38 AM
Double check with sql service manager. Did you change sa pwd?
------------
Shaji at 6/5/2002 4:36:16 AM
Hi ,
Whenever I restart the Server , SQL server service is starting properly, but the agent is showing the green sign in EM ,agent Log also its showing its started. But in EM the jobs are not showing the next run time its showing ( Date and time not available). When I double click the jobs its showing the following error message
Micorsoft SQL - DMO ( ODBC Sql state 42000)
Error 14258 : can not perform this operation while SQL server agent is starting)
FYI :This server contain the databases of SMS too .
Thank you ,
Shaji
Hi,
I'm trying to create a database that takes specific information from a number of databases on different servers to make some reporting that we have much easier.
I'm pretty new to SQL so I'm not sure of the best way to proceed. I read an article that suggested I use the OPENROWSET command. The problem is, the version of SQL that came with one of the programmes we use is limited and will not allow you to turn on the allow "Ad Hoc distributed Queries" so the SLQ statement will not execute.
I'm confused why it won't let me to connect through ODBC as I've created a web page that selects data from this database with no problems!
Here is the SQL statement that I've written to make sure it is the correct one (on the msdn library page it said that this was the ODBC connection):
SELECT a.*
FROM OPENROWSET('MSDASQL','DRIVER=(SQL Server);SERVER=APPOLOACT7;UID=sa;PWD=***************',
'SELECT * FROM MDCTestAndDev.dbo.TBL_CONTACT') AS a
I've also created the ODBC connection using the tool on Administration Tools>Data Sources ODBC
Any help would be greatly appreciated (also any ways of selecting from one database and inserting it into another will be helpfull)
Thanks