hi all,
i'm a newbie in SSIS. i created a package to transfer data from one table to another. before the data flow, i added a Execute SQL Task package that truncate the dest table if it exists and create a new one if it doesn't.
i'll encounter an error (invalid object name) when i run the whole package but no error if i execute the tasks 1 by 1.
what's the workaround for this? thanks!
Hi All,
What is the most straighforward way of not importing rows that already exist in the destination table (as determined by a primary key value)? Thanks.
Regards,
Daniel
My source has 2.2 million of records. I'm performing the incremental load.In the lookup transformation i used the destination table for the reference using Full cache mode.For the first time package executed successfully but when i executed the package second time, Suddenly Package hangs while running.Than i truncate the data from the destination table and restart the SQL Server Services.After doing all this i executed package again and it worked but when i executed package second time, again package hangs up .I have 8GB RAM and i5 2.5 GHz Processor laptop.
View 7 Replies View RelatedI am developing a custom destination component and I have encountered a few areas where there seems to be a lack of helpful documentation and examples.
1. I have not been able to find any information on or examples of creating custom destinations with an error output. The OLE DB Destination has an error output so I investigated the input and error output properties in the advanced editor and found that the OLE DB Destination error output is synchronous with the input (its SynchronousInputID matches the input's ID) and has its ExclusionGroup value set to 1. Using this information, I modeled my error output after the OLE DB Destination.
ProvideComponentProperties:
AddErrorOutput(ERROR_OUTPUT_NAME, input.ID, 1);
ProcessInput:
int errorOutputID = -1;
int errorOutputIndex = -1;
GetErrorOutputInfo(ref errorOutputID, ref errorOutputIndex);
...
buffer.DirectErrorRow(errorOutputID, 0, errorOutputIndex);
Checking the input and error output properties in the advanced editor for my custom destination component I find the following:
Input
-----
ID: 3515
Error Output
------------
ExclusionGroup: 1
ID: 3516
IsErrorOut: True
SynchronousInputID: 3515
Shortly after I start my SSIS package and it encounters an error row, I get the following exception:
[My Destination Adapter 1 [3512]] Error: System.ArgumentException: Value does not fall within the expected range. at Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSBuffer90.DirectErrorRow(Int32 hRow, Int32 lOutputID, Int32 lErrorCode, Int32 lErrorColumn) at Microsoft.SqlServer.Dts.Pipeline.PipelineBuffer.DirectErrorRow(Int32 outputID, Int32 errorCode, Int32 errorColumn) at MyDestination.ProcessInput(Int32 inputID, PipelineBuffer buffer) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
2. My custom destination component is used for writing a file with a fixed schema. I followed the means by which source component examples add their output columns, but applied this to my external metadata columns. In my Validate() I check if the ExternalMetadataColumnCollection.Count == 0 and return DTSValidationStatus.VS_NEEDSNEWMETADATA; to force a call to ReinitializeMetaData(). In ReinitializeMetaData() I call a method that creates the input's external metadata columns that reflect my external data source.
This works fine except every time I add my custom destination component to a SSIS Package and go to edit the component I am greeted with a dialog box that states: "The component is not in a valid state. ... Do you want the component to fix these errors automatically?" Pressing the Yes button, I assume, makes the call to ReinitializeMetaData() and I have my external metadata columns. Where is the correct place to add the external metadata columns so the user does not have to take this extra step every time they add my component to their package?
Hi all,
I am developing an ETL wherein the requirement is to do an incremental load and at the same time, if there is a record that got deleted in the Source delete it from the destination too, makes sense.
The approach am doing is, pick data from the SRC and Destination, pass it onto a Merge join component, do a Full Outer join, then pass the rows to a conditional split. Newly Added records and updated records I can handle, how do I handle the Deleted records?
Am I correct in the way I am doing or there is something better to handle this?
Thanks in advance
I am working on SSIS wehre I need to work on a flat file as a source and needed to import it to database. If the destination table have the record already, I need to update it and if not exist, I just need to import the whole data.
View 9 Replies View RelatedHow to design ta SSIS package which loops through DESTINATION folder files and checks whether that file is there in the SOURCE or not.
If the file exists then I have to check the modified date on DESTINATION file if it is greater than 1 day delete that file. If the modified date is less than that SOURCE file then I have to copy that
file to DESTINATION<o:p></o:p>
<o:p></o:p>
If there are files which exists in SOURCE and not in DESTINATION, then how shall we copy all the files to the DESTINATION that are created on the day of execution of package.<o:p></o:p>
Posted - 09/10/2007 : 15:53:26
Hey all - got a problem that seems like it would be simple (and probably is : )
I'm importing a csv file into a SQL 2005 table and would like to add 2 columns that exist in the table but not in the csv file. I need these 2 columns to contain the current month and year (columns are named CM and CY respectively). How do I go about adding this data to each row during the transformation? A derived column task? Script task? None of these seem to be able to do this for me.
Here's a portion of the transformation script I was using to accomplish this when we were using SQL 2000 DTS jobs:
'**********************************************************************
' Visual Basic Transformation Script
'************************************************************************
' Copy each source column to the destination column
Function Main()
DTSDestination("CM") = Month(Now)
DTSDestination("CY") = Year(Now)
DTSDestination("Comments") = DTSSource("Col031")
DTSDestination("Manufacturer") = DTSSource("Col030")
DTSDestination("Model") = DTSSource("Col029")
DTSDestination("Last Check-in Date") = DTSSource("Col028")
Main = DTSTransformStat_OK
End Function
***********************************************************
Hopefully this question isnt answered somewhere else, but I did a quick search and came up with nothing. I've actually tried to utilize the script component and the "Row" object, but the only properties I'm given with that are the ones from the source data.
thanks in advance!
jm
I am using SQL Server 2005 and trying to create a linked server on Oracle 10. I used the commands below:
EXEC sp_addlinkedserver
@server = 'test1',
@srvproduct = 'Oracle',
@provider = 'MSDAORA',
@datasrc = 'testsource'
exec sp_addlinkedsrvlogin
@rmtsrvname = 'test1',
@useself = 'false',
@rmtuser='sp',
@rmtpassword='sp'
When I execute
select * from test1...COUNTRY
I get the error. "The OLE DB provider "MSDAORA" for linked server "...." does not contain the table "COUNTRY". The table either does not exist or the current user does not have permissions on that table."
The 'sp' user I am connecting is the owner of the table. What could be the problem ?
Thanks a lot.
I'm inserting from TempAccrual to VacationAccrual . It works nicely, however if I run this script again it will insert the same values again in VacationAccrual. How do I block that? IF there is a small change in one of the column in TempAccrual then allow insert. Here is my query
INSERT INTO vacationaccrual
(empno,
accrued_vacation,
accrued_sick_effective_date,
accrued_sick,
import_date)
[Code] ....
'****************************************************************************
Cmd.CommandText = "Drop Table Raj"
Cmd.ExecuteNonQuery()
Cmd.CommandText = "Select * Into Raj From XXX"
Cmd.ExecuteNonQuery()
'**************************************************************************
This generates error that Table already exist.
If Wait 1 sec then execute statement then it works fine.
Thanks in Advance
Piyush Verma
Hello,
Probabaly a silly question yet as a DOTNET developer, I'm trying to simulate DTS when for example, I don't have permission to perform DTS on a production server.
In particular and interested regards caching of rows before the service decides to flush the buffer and write to the target table. Safe to assume DTS is cursor based?
I want to make a query, stored procedure, or whatever which will only display the primary key where there does no exist a foreign key in linked table.For example. If I had two tables with a one to many relationship.A [Computer] has one or more [Hard Drives]. I want to select only those computers which do not have a Hard Drive(s) associated with them. That is, show all computers where the Computer_ID field in the [Hard Drives] table does not exist. This seems simple but I'm drawing a blank here.
View 1 Replies View RelatedI have table 'stores' that has 3 columns (storeid, article, doc), I have a second table 'allstores' that has 3 columns(storeid(always 'ALL'), article, doc). The stores table's storeid column will have a stores id, then will have multiple articles, and docs. The 'allstores' table will have 'all' in the store for every article and doc combination. This table is like the master lookup table for all possible article and doc combinations. The 'stores' table will have the actual article and doc per storeid.
What I am wanting to pull is all article, doc combinations that exist in the 'allstores' table, but do not exist in the 'stores' table, per storeid. So if the article/doc combination exists in the 'allstores' table and in the 'stores' table for storeid of 50 does not use that combination, but store 51 does, I want the output of storeid 50, and what combination does not exist for that storeid. I will try this example:
'allstores' 'Stores'
storeid doc article storeid doc article
ALL 0010 001 101 0010 001
ALL 0010 002 101 0010 002
ALL 0011 001 102 0011 002
ALL 0011 002
So I want the query to pull the one from 'allstores' that does not exist in 'stores' which in this case would the 3rd record "ALL 0011 001".
I need to delete all records in the TBL_PCL_LENS_DATA table that do not have a corresponding record in the TBL_VERIFICATION table.
Primary Table: TBL_PCL_LENS_DATA
PK: Serial Number
PK: ProcessedDateTime
Child Table: TBL_VERIFICATION
PK: Serial Number
Thanks,
Sean
Hi,
If you have two synchronous transformation components and the input of the second is connected to the output of the first, does the first transformation process (loop through) all rows in the buffer before outputting these rows to the second transformation? Or does the first transformation output each individual row to the second transormation as soon as it has finished processing it?
Thanks in advance,
Lawrie.
tell me the difference between Audit transformation and rowcount transformation.
Because audit and rowcount transformation will provide the environment variables.
Only difference i am finding is rowcount returns the count of rows its updating .
Apart from these is there any other difference?
Tell me the scenario where i need to use the audit transformation.
I am stuck on finding a solution to transpose source data from a system via a metadata look-up table into a destination table. I need a method to transpose/pivot the source data into columns (which are by various data-types). The datatypes for each column are listed in a metadata table.
Source Data Table:
Table Name: Source
SrcID AGE City Date
01 32 London 01-01-2013
02 35 Lagos 02-01-2013
03 36 NY 03-01-2013
Metadata Table:
Table Name:Metadata
MetaID Column_Name Column_type
11 AGE col_integer
22 City col_character
33 Date col_date
Destination table:
The source data to be loaded into the destination table(as shown below):
Table Name: Destination
SrcID MetaID col_int col_char col_date
01 11 32 - -
01 22 - London -
01 33 - - 01-01-2013
02 11 35 - -
02 22 - Lagos -
02 33 - - 02-01-2013
03 11 36 - -
03 22 - NY -
03 33 - - 03-01-2013
I am trying to pull a min value of a date column from table 1, if table 1 does not have any record I need pull a date column from table 2. Table 2 will always have a unique record ID (No duplicate ID's).
Table 1
ID date
1 1/1/2014
1 1/5/2014
Table 2
ID date
1 1/5/2014
2 10/15/2014
Here is the desired result when running for ID = 1 (select Min(date) where ID = 1, I should be getting 1/1/2014 from Table 1.
If I am running the same query where ID=2 then I should be getting 10/15/2014 from Table 2. So basically I need to check if a value exists on Table 1 first, if there is no value on Table 1 and then to grab the value from Table 2.
I need a SSIS Package that compares the two tables and removes the rows in the first table with keys that do not exist in the second table. For example....
I have a table of returns based on returnID. In another table I have returnErrors that are based on returnID as well. I want a package that will uses my returns table as a source and compares that dataset to the dataset of the returnError and remove or spilt the data so that my remaining dataset only has returns that have returnErrors. I can do this in T-SQL, but I am looking for a SSIS solution that uses the conditional split transformation or some other transformation(s) combinations.
-- Ryan
I have someone in my organization that is running
EXTREMELY large queries on our SMS database from
his desktop. By that I mean that he is pulling all the fields
from multiple tables requesting 40+ fields. (And yes, he
states that he needs all this information from 1 query!!)
With this in mind, can you tell me where the work is performed?
Are all the requested tables and fields pulled back to the
desktop and then joined? Or, does the work get done on
the server?
Thanks! I appreciate the help.
Toni
Hi,
Can anyone please point me in the right direction?
What I am trying to do should be very straightforward:
Take a flat file, perform various transformation on various columns using the SCRIPT COMPONENT task, then send the transformed (and un-transformed) rows to a table in the database.
My question is, how to do this using scripting? I have yet to see an example of what I'm trying to do. (I have both Kirk Haselden's book, Donald Farmer's SSIS scripting book, and the msdn website, but I have yet to see an example of what I'm trying to do!)
FILE SOURCE --> SCRIPT COMPONENT (synchronous transform) --> OLE DB DESTINATION
How do I account for all the columns that will be both transformed and un-transformed, and get them into the table? That is the missing piece of information I can't find anywhere.
The closest thing I found was this code snippet. Do I need to use this syntax, eg. Me.Output0Buffer.FirstName = (where FirstName is the actual column name??)
etc.
Then, once I hook up the SCRIPT COMPONENT to the OLEDB Destination, which uses a connection manager to the table, it will insert FirstName with what I specify?
Help. Thanks.
Me.Output0Buffer.AddRow()
Me.Output0Buffer.FirstName = columnValue (or whatever)
Hi everyone!
I'm on my way to learn SSIS by myself and it's a little complicated!
I'd like to ask you one thing:
I have two tables at my data source, one is "Clients" and the other one is ClientsAddress. That is, a client can have more than one address. Both tables are related by a one to many relationship and the tables description is:
CLIENTS CLIENTSADDRESS
#PK_Client #PK_Client
other fields.. #ID_address
... other fields
What i intend to do is to obtain one table with approximately 3 fields, each one for a possible client address; something like this:
CLIENTS
PK_Client
ID_Address1
ID_Address2
ID_Address3
My question is what transformation can i use? an how ?
Thanks very much in advance!!
Emilio Leyes
Salta, Argentina
Currently database1 and database2 are planned to be synchronized with the interval of 5 seconds!! ( dont know exact, but i select run continoulsly on subscriber screen )
This could cause serious performance issues as both applications will be live on difference servers.
how can i Synchronization should be performed on day basis or it should be modification basis to avoid any performance issue on live application
i am using merge replication
Local distributor
and subscriber on another server .
plz help me
its urgent
hi i am running this program
and its giving some problem while execution.
When the program tries to create the table expt1..its says
Msg 2714, Level 16, State 1
There is already an object named 'expt1' in the database.
and if i try to drop the table expt1 it says
Msg 3701, Level 11, State 1
Cannot drop the table 'expt1', because it doesn't exist in the system catalogs.
How should I resolve this problem...?
==========================
Declare @cmdstring varchar(255)
Declare @filename varchar(32)
DECLARE @v datetime
SELECT @v = GetDate()
Create table expt1(GMSKEY char,CONTRACT char,ORIGINALCONTRACT char,STATEMENTID char,
STATEMENTDATE char ,partner char ,ADDRESSSEQ char,BOOKINGAMOUNT char,
BOOKINGCURRENCY char,TAXEDIND char,TAXTYPE char,
DUEPERIOD char,ACCOUNTNUMBER char,PRODMONTH char,PRODYEAR char,BOOKINGUNIT char,
BOOKINGQUANTITY char,STATEMENTSEQ char,COSTID char,DELIVERYMETHOD char)
SELECT
DETAILTRANS.GMSKEY,
DETAILTRANS.CONTRACT,
DETAILTRANS.ORIGINALCONTRACT,
DETAILTRANS.STATEMENTID,
convert(varchar,DETAILTRANS.STATEMENTDATE,106) statementdate,
DETAILTRANS.partner,
DETAILTRANS.ADDRESSSEQ,
DETAILTRANS.BOOKINGAMOUNT,
DETAILTRANS.BOOKINGCURRENCY,
DETAILTRANS.TAXEDIND,
DETAILTRANS.TAXTYPE,
TITLECT.DUEPERIOD,
DETAILTRANS.ACCOUNTNUMBER,
DETAILTRANS.PRODMONTH,
DETAILTRANS.PRODYEAR,
DETAILTRANS.BOOKINGUNIT,
DETAILTRANS.BOOKINGQUANTITY,
DETAILTRANS.STATEMENTSEQ,
DETAILTRANS.COSTID,
TITLECT.DELIVERYMETHOD,
'' RECEND
INTO expt1
FROM DETAILTRANS,TITLECT
where DETAILTRANS.TITLEID=TITLECT.TITLEID
AND DETAILTRANS.CONTRACT IS NOT NULL
AND DETAILTRANS.CONTRACT!='N/A'
AND DETAILTRANS.EXPREV='E'
AND DETAILTRANS.PRELIMORFINAL='F'
AND DETAILTRANS.postedDATE IS NULL
ORDER BY DETAILTRANS.GMSKEy
select @filename = 'XAPIALTMKT'+CONVERT(varchar, @v, 112)+ SUBSTRING(CONVERT(varchar, @v, 108), 1, 2)
+ SUBSTRING(CONVERT(varchar, @v, 108), 4, 2)+ SUBSTRING(CONVERT(varchar, @v, 108), 7, 2) + '.TXT'
Select @cmdstring = 'bcp GM_PROD..expt1 out d:est' + @filename + ' -c -t"|" -r -S -Usa -Psa'
exec master..xp_cmdshell @cmdstring
drop table expt1
===========
Thanks
Harish
I have an appplication which creates triggers on tables. It works on nearly every table I have in my repository except for one. When I attempt to apply it to that one, I get the following:
"The object TABLENAME does not exist or is invalid for this operation."
I know the table exists and am able to access data in it just fine. So what are all possible reasons why CREATE TRIGGER might be an invalid operation for it?
I have data as below: select ID,code,go,back from tableA
ID code go back
2 C US UK
2 A UK US
1 A US UK
1 Z UK US
1 C UK US
1 A US UK
I only want to pull out whole ID group which code Z exist. I tried as below:
select ID,code,go,back from tableA A
where exists
( select ID,go,back
from tableA B with (nolock)
where A.ID = B.ID
and A.code='Z')
But it only appear:
ID code go back
1 Z UK US
How can I appear with the group as well?
ID code go back
1 A US UK
1 Z UK US
1 C UK US
1 A US UK
Im from Russia, sorry if my english is not very good.
Here's the case:
1)-------------------------------
I made a DTS-package in sql2000 that transfers the [sql table] into [dbf file] via jet4.
First i create (in delphi) the empty dbf with the same name and columns same as in sql table.
Second, I run my DTS with variables - source and destination table names
In DTS there is source, destination and transformation . After I send the Variables(table names)
, the transformation "arrow" needs to be "refreshed" to make column names in both tables correspond each other. For that in transformation I chose ActiveXScript Mode and wright VB Script:
'**********************************************************************
' Visual Basic Transformation Script
'************************************************************************
' Copy each source column to the destination column
Function Main()
dim i
For i = 1 To DTSSource.Count
DTSDestination(i) = DTSSource(i)
next
Main = DTSTransformStat_OK
End Function
And it works
2)------------------------------
I want to do same thing in sql2005 SSIS but don't figure out how...
I managed to make a package that recieves (in variables) table names and runs correctly.
But after I change those variable names into any other it crashes -
Description: "component "OLE DB Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
Of cource this happens 'cause I didn't "refresh" the transformatoin (and maybe also source and dest), but I don't know how.
Anyone can help ?!
I have 1 table to be merge replicated to 2 other servers (DATA5 and DATA5R). Whichever server I push a subscription to first works just fine. The second server get the following error.
Table 'UPDATE_LOG' does not exist in the Subscriber database.
(Source: DATA5R (Data source); Error number: 21078)
---------------------------------------------------------------------------------------------------------------
'. Check sysobjects.
(Source: DATA5R (Data source); Error number: 2501)
---------------------------------------------------------------------------------------------------------------
The process could not deliver the snapshot to the Subscriber.
(Source: Merge Replication Provider (Agent); Error number: -2147201001)
---------------------------------------------------------------------------------------------------------------
I'm not sure why it expect the table to be there already. It doesn't on the first server. Am I missing something. If I create the substription for DATA5R first then it works and DATA5 fails.
What am I missing?
Hello,
I need to delete rows from one table that appear in another table.
For example:
newnames has fname, lname, age
oldnames has fname, lname, age
So, I want to be able to remove the rows from newname where there are rows in oldnames. This should be simple enough.
This is what I'm trying to use but it is deleting everything from oldnames.
delete from oldname
select * from newnames
Hi,
I have a table of row IDs, order numbers, and status. Status is a value of 1 or 2. Some rows only exist as a 1, some only as a 2, and some exist twice -- once as 1 and once as 2. I want to select orders that are 2 as well as rows that are 1 but do not also exist in the table as 2. Ultimately I will only see each order number once. Is there a better/faster way than doing multiple selects and comparing them to each other?
Example data:
RowID OrderNum Status
1 101 1
2 102 1
3 102 2
4 103 2
Desired results when selecting ID and ordernum from that table:
1 101
3 102
4 103
Thanks.
Hello I am trying to run a select statement in Java against SQL Server 2K. But I keep getting an error saying that the table doesn't exist.
Is this a problem with my SQL statement?
select * from counting
I also tried
select * from dbo.counting
my connection url is
jdbc:microsoft:sqlserver://IS-0081526:1433;databaseName=bail;
I can run these queries from Query analyzer I am able to run them with the same account and login.
Hi,
I am getting message while modifying one table in SSMS like "Table '?' could not be loaded. Column '?' does not exist" . Howevery particular column exist in table and even i am able to modify it with T-SQL.
Any Idea?