My Database File Corrupted,why?
Nov 10, 2007
hi,
i developed an application which running on PDAs.i am using sqlserver ce database.my database file sometimes corrupted,why sqlce databases are corrupted and what can i do not corrupted.i can repair my database file when it corrupted but my customers not understand when database file was corrupted,so they think that program doesnot work.
View 4 Replies
ADVERTISEMENT
Oct 9, 2007
yes,I have an error, like 'The database file may be corrupted. Run the repair utility to check the database file. [ Database name = SDMMC Storage Cardwinpos_2005WINPOS2005.sdf ]' .I develope a program for Pocket Pcs and this program's database sometimes corrupt.what can i do?please help me
View 4 Replies
View Related
Nov 28, 2014
I run MSDE on a Windows XP Server and my database was marked as "suspect" by Enterprise Manager and its icon become gray. I detach that database and try to re-attach it but there is an error as the following:
Error 3624:
Location : page.cpp:2801
Expression: rowLength >= offset + deleteLenght
SPID : 56
Precess ID:1612
After that, I uninstall the MSDE and re-install new MSDE SP4 and try to re-attach the database file again and there is still an error. Is there anyway i can recover the data from that database?
View 4 Replies
View Related
May 9, 2007
A friend of mine called and said that his database was suspect and he detached it and was unable to attach it. The SQL Server Version is 2000 with the latest service packs installed. When I checked it the database (MDF) size was 1MB and the LDF size was 3.8 GB. I was not able to attach the two together and I was not able to attach the database using sp_attach_single_file_db. I did find an old backup of his database and attached that so he can work off of it but it is 1 yr old and he needs recent data. Since the MDF seemed to be blank we cant do much with that, but there seems to be data in the LDF. Is it possible to extract any data from the LDF file?
Sunny
View 1 Replies
View Related
Jun 3, 2015
We have database when trying to make read only throwing below error: with stack dump
Location: recovery.cpp:4517
Expression: m_recoveryUnit->IsIntendedUpdateable ()
SPID: 51
Process ID: 6448
Msg 926, Level 14, State 1, Line 1
Database 'XXXX' cannot be opened. It has been marked SUSPECT by recovery.
See the SQL Server errorlog for more information.
Msg 5069, Level 16, State 1, Line 1
ALTER DATABASE statement failed.
Msg 3624, Level 20, State 1, Line 1
A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
Msg 3313, Level 21, State 2, Line 1
During redoing of a logged operation in database 'XXXX', an error occurred at log record ID (0:0:0). Typically, the specific failure is previously logged as an error in the Windows Event Log service. Restore the database from a full backup, or repair the database.
Msg 3414, Level 21, State 1, Line 1
An error occurred during recovery, preventing the database 'XXXX' (database ID 7) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
Investigation DONE:
- DBcc checkdb shown Clean
- database is online and able to access
-Detached database and attached with rebuild log, still could not bring database read_only
SQL version : SQL server 2008 SP4.
View 15 Replies
View Related
Nov 14, 2007
We have one database of 5 GB of which when we take the backup and restore in another location, it says "Device Activation Error. The Physical file name e:databaseike_log.ldf may be incorrect".
The database has more than one log file.
Now when we use another procedure to create new database and stop the sql, then replace the old mdf file and REBUILDLOG. (Ie dbcc rebuildlog(nike,1,0)). It says incorrect DBCC Statment.
Pl. suggest us what to do?
View 3 Replies
View Related
Jul 20, 2005
Need to recover from a corrupted log file. The database in EnterpriseManager shows the database as corrupt.Using sp_Attach_db produces a corrupt log message.Any way to recover the data?Thanks
View 2 Replies
View Related
Nov 1, 2007
hello,
i am using sql server ce 2.0 on windows ce 4.2.sometimes my sdf file gets corrupted but i cant understand why?i know how this file repair.but for me it is not a solution.please somebody help me!
View 1 Replies
View Related
Mar 16, 2006
ok..my friend sent me a video via file transfer, but when i tried to view it, and open it up with windows movie maker (that is the program she made the video on) it said the file was corrupted. is there any way i can fix the corrupted file? or any other program i can view it on? windows media player also declares it corrupted.
View 1 Replies
View Related
Apr 3, 2008
Hi This is chetan jain sql server DBA.
I came accross a probplem while synchronising production with DR in logshipping.
logshipping was stopped and the message was " Cannot copy the ......TRN . file is corrupted.
can anybody suggest that what should be done if TRN file is corrupted...because if i manully restore the logs at DR i will need every log file to sync Prod with Dr.log file that is corrupted cannot be skipped...neither it can be restored at Dr.
please suggest the solution..
Thanks in Advance...
Thanks in advance.
-- Chetan
View 4 Replies
View Related
Jul 20, 2005
Recently, one of our database's mdf and ldf was corrupted. We were able tobring back the database with the capability of importing and querying thedata. However, the data is not the full list. Some of the data are stillmissing because the tables we want still has sone 'chain mis linkage' errorwhen we did a DBCC checkdb/checktable. DBCC couldn't fix those errorseither. We're pretty sure that there are some data still burry under thecorruption. Then we thought of the life LDF file. This file should haverecorded every transaction up to the point of failure. So we trying torecover that file, but there are 2 problems. First is we don't have back upof that file and 2nd, that file is also corrupted. I couldn't backup thecorrupted ldf file at its current state. It's giving me some unrelated errormessage like disk space is out. All I know now is the only hope to recoverthose missing data are in this LDF file. We tried to use this software fromLimingent Log Explorer to recover it. So far no such luck with that. SoI'm asking anyone who has similar experience or problem. Please let me know.I need to know anyway to recover this LDF file, either by using sql server'snative tools or 3rd party tools. Any input is helpfull. thanks in advance.Wei
View 1 Replies
View Related
Jun 7, 2007
hello i have this problem if anyone can help
EXEC sp_attach_single_file_db @dbname = 'world',
@physname = 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataworld.mdf'
Msg 1813, Level 16, State 2, Line 1
Could not open new database 'world'. CREATE DATABASE is aborted.
Msg 3456, Level 21, State 1, Line 1
Could not redo log record (9767813:109:10), for transaction ID (1:1182802845), on page (1:27846), database 'world' (database ID 5). Page: LSN = (9767810:70:66), type = 2. Log: OpCode = 3, context 19, PrevPageLSN: (9767812:47:11). Restore from a backup of the database, or repair the database.
Msg 3313, Level 21, State 2, Line 1
During redoing of a logged operation in database 'world', an error occurred at log record ID (9767813:109:10). Typically, the specific failure is previously logged as an error in the Windows Event Log service. Restore the database from a full backup, or repair the database.
thanks
View 10 Replies
View Related
Aug 6, 2015
I want to know is there any process alert me that my data or .ldf file get corrupted?
I've been going through data corruption from last 2 days in row that .ldf getting corrupted and I've to fix it.
Is there anyway I can setup any alert? or any better procedure ?
View 31 Replies
View Related
Jul 21, 2014
our sql server databases are on a window cluster server.how to correct this issue or why would this happen? FILESTREAM data container 'M:TessituraDB DataDocuments' is corrupted. Database cannot recover.
View 0 Replies
View Related
Aug 7, 2015
Log shipping was configured 6 months back. A Transaction log file got corrupted today. How to resolve this?
View 20 Replies
View Related
Apr 11, 2006
I use this code to get Tiff files from db , but output file seems to be corrupted :
Dim pubsConn As SqlConnection = New SqlConnection("Server=(local);uid=sa2;pwd=sony;database=pubs;") Dim logoCMD As SqlCommand = New SqlCommand("SELECT pub_id, logo FROM pub_info", pubsConn)
Dim fs As FileStream ' Writes the BLOB to a file (*.bmp). Dim bw As BinaryWriter ' Streams the binary data to the FileStream object.
Dim bufferSize As Integer = 100 ' The size of the BLOB buffer. Dim outbyte(bufferSize - 1) As Byte ' The BLOB byte() buffer to be filled by GetBytes. Dim retval As Long ' The bytes returned from GetBytes. Dim startIndex As Long = 0 ' The starting position in the BLOB output.
Dim pub_id As String = "" ' The publisher id to use in the file name.
' Open the connection and read data into the DataReader. pubsConn.Open() Dim myReader As SqlDataReader = logoCMD.ExecuteReader(CommandBehavior.SequentialAccess)
Do While myReader.Read() ' Get the publisher id, which must occur before getting the logo. pub_id = myReader.GetString(0) ' Create a file to hold the output. fs = New FileStream("\Server1shared1logo" & "KK" & ".tiff", FileMode.OpenOrCreate, FileAccess.Write) bw = New BinaryWriter(fs)
' Reset the starting byte for a new BLOB. startIndex = 0
' Read bytes into outbyte() and retain the number of bytes returned. retval = myReader.GetBytes(1, startIndex, outbyte, 0, bufferSize)
' Continue reading and writing while there are bytes beyond the size of the buffer. Do While retval = bufferSize bw.Write(outbyte) bw.Flush()
' Reposition the start index to the end of the last buffer and fill the buffer. startIndex += bufferSize retval = myReader.GetBytes(1, startIndex, outbyte, 0, bufferSize) Loop
' Write the remaining buffer. bw.Write(outbyte, 0, retval - 1) bw.Flush() ' Close the output file. bw.Close() fs.Close() Loop
' Close the reader and the connection. myReader.Close() pubsConn.Close()
Me.Div1.InnerHtml = ("<embed height=650 width=100% toolbar='' src= '" & "\Server1shared1logoKK.tiff" & "' type='application/x-alternatiff'>")
View 1 Replies
View Related
Feb 8, 2012
I trying to update my Aggregation Design for a partition using BIDS Helper. The current aggregation design contains about 60 aggregations and the new aggregation I am trying to add is across 5 dimension attributes, the product of which is about 500,000 unique values. The fact table is about 13,000,000 rows.
When I deploy the aggregation and run ProcessIndex, I get the follow error:
File system error: The following file is corrupted: Physical file: ?E:Program FilesMicrosoft SQL ServerMSAS10_50.MSSQLSERVEROLAPDataTestDB.14.dbcube_2.607.cub
cubemeasuregroup_2.633.detDefaultPartition_2.579.prt852.agg.flex.data. Logical file.
If I remove the new aggregation, deploy, and run ProcessIndex again, it processes fine.
Is there some file size limitation I am running into? The agg.flex.data file is 7.8 GB before adding the new aggregation, so it isn't subject to the same 4 GB limit as .asstore.
Windows Server 2008 64 bit
SQL Server 2008 R2 (10.50.1746.0) 64 bit
View 5 Replies
View Related
Jan 25, 2005
Hi all,
Had a disk problem here, and all apps connected to our database hung. Nothing was responding, rebooted, and mssqlserver hangs on startup.
If i move the mdf and ldf files of the database in question to another folder, mssqlserver starts up ok, with the db marked as suspect.
It would seem the the mdf and ldf are corrupted.
I am restoring a backup from yesterday, but this will take hours.
Any suggestions trying to recover it as it sits?
Thanks in advance for any ideas.
View 7 Replies
View Related
Dec 15, 2005
I have a SQL 2000 database whose MDF is approx. 105 GB. Everything has been working fine for months until this past weekend when the database server dropped offline. I restarted the services and SQL server looks to have started up okay. However, trying to access it via Enterprise Manager causes EM to hang. Checking the Windows event log, there are a whole series of messages stating ...
3455 : Analysis of database 'ptportal' (7) is XX% complete (approximately 61 more seconds)
This 'analysis' ran for over 12 hours ... I have never seen this run before, much less this long. Now, there are a new series of messages stating ...
3450 : Recovery of database 'ptportal' (7) is XX% complete (approximately 56526 more seconds) (Phase 2 of 3).
This 'recovery' has been running for 9 hours now. Does anybody have any idea what has happened here or what is going on? My guess is that this database has been corrupted and SQL Server is trying to do a repair? Anybody know how long this usually takes and what the success liklihood would be?
Thanks
-- Jeff Chastain
View 1 Replies
View Related
Oct 4, 2007
Hi,
I have a database corrupted showing on the Object Explorer the name of the database and showing near (6.5). Deleted not accepted any other function not allow. Is there any way to take off from the Object Explorer?
Best regards
View 3 Replies
View Related
Mar 20, 2000
I am backing up SQL 6.5 DB using Backup Exec 7.2 on NT 4.0 server SP4 with SQL server agent. The backup job ends in Failed status and a warning that DBname is corrupt. I then try to run DBCC Checkdb, newalloc, and checkcatalog commands to repair the DB. No further ahead yet. Are there any other commands that I can perform on the DB so that the corruption can be repaired, or verified there indeed is corruption of DB?
View 1 Replies
View Related
Aug 13, 2006
Hi, my 'model' database corrupted and my SQL Server 2005 Express can't be started.
I believe I have the SAME problem as his:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=455524&SiteID=1
but when I try the command start sqlservr.exe -c -T3608, an error message appeared:
"Your SQL Server installation is either corrupt of has been tampered
with (Error getting instance ID from name). Please uninstal then re-run
setup to correct this problem"
Well, the problem is that I have an ActiveBPEL database inside, and I really need a way without reinstalling it.
Any solution??
Thanks,
Edwin
View 6 Replies
View Related
Jun 8, 1999
Hi Everyone,
I am a newbie to SQL Server Admin. Today when I ran Dbcc newalloc on Model it is showing
corruption on syobjects with a 2525 error. I am not sure how to fix this problem? Since
this is a critical payroll application server, I need to solve it at the earliest.
If anybody has faced this problem earlier or knows how to solve, please respond to the following
address: vsrikanth@ameren.com
Thanx for all responses
Srikanth
View 1 Replies
View Related
Dec 28, 2006
The following list of actions leads to a corrupt database on SQL Server 2005.
Create a database snapshot
Drop a table in the database
Backup the database
Restore from backup
Revert to the snapshot
I'm not entirely surprised that it results in a corruption, what is surprising is that I can revert from a snapshot after restoring. There needs to be some kind of check to prevent reverting to a snapshot in a case like this. Until SQL Server prevents you from doing it, I'd recommend a best practice is to delete all snapshots before you restore a database so that you cannot do this by accident.
View 3 Replies
View Related
Apr 16, 2015
We have repartioned a server (create a larger C-drive/system partition). It's about Windows Server 2003. Before repartioning SP2 was not installed. After repartioning checkdisk started automatically (as normal after using a disk partitioning tool). Checkdisk did some interesting and bad things with my files: changing file permissions and make some files corrupt, how I don't know. Something to do with SP2 not installed and the NTFS filesystem. After this action I have a corrupted SQL database. Tried to repair with the DBCC CHECKDB repair commands, but fail. Error in event viewer:
Error: 823, Severity: 24, State: 2
I/O error (bad page ID) detected during read at offset 0x0000003bdc4000 in file 'D:program filesMicrosoft SQL ServerMSSQLData352.MDF'.
I also still have NTFS errors in my event viewer. What to do? How can I repair the database? Only running checkdisk again? (and will this work?) Than all file security will be reset to Administrators.
Other ways to rebuild my database? (tools???) Unfortunally there isn't a good backup available due to a lack of good configuration of the backup software.
View 2 Replies
View Related
Mar 29, 2007
Let me start off by saying that under normal circumstance I would just restore from the last good backup. However in this case it appears as though the last good backup was sometime last August ... arg! After much yelling at the person responsible I've been attempting to get my blood pressure below 200 and see what data is recoverable.
First off, this was a RAID5 system that failed 1 drive. Secondly, before we got someone in there to replace said drive it failed a second drive and the system went down. We managed to massage the system back online but it appears that there is some corruption as a result which is no surprise.
I've done DB repairs in the past and it hasn't been too bad, but this time it is looking a little gnarly.
I've kicked everyone off the server and tried starting SQLServer several different ways.
I tried starting the service normally and then flagging the bad DB into single user mode with "ALTER DATABASE foo SET SINGLE_USER". I then did a select * from sysdatabases to make sure it took, which it did. I also tried starting the whole SQLServer in single user mode from the command line, "SQLServr -m".
I can run "DBCC CHECKDB('foo')" and I get a long ugly list of allocation errors. I posted it to a link as the 1349 lines returned is a little long:
http://chrisnet.net/sqlbad/dbcc_checkdb.txt
But when I attempt to bite the bullet and destroy data in an attempt to put things back together with:
"DBCC CHECKDB('foo', REPAIR_ALLOW_DATA_LOSS) WITH ALL_ERRORMSGS"
I get:
Server: Msg 7919, Level 16, State 2, Line 1
Repair statement not processed. Database needs to be in single user mode.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
But yet the database is in single user mode, according to everything I check check on. Is this just SQL's way of telling me the corruption is too severe to be repaired? No output is displayed in the shell cmd window like it is for a successful DBCC either (when running sqlservr -m).
Ideas? Or do I put a bullet through it's brain?
-Chris
View 7 Replies
View Related
Jan 18, 2011
I was trying to update an SSAS database on a test server and got the following error when trying to deploy from Visual Stuido. I get a similar error in SMS. I tried to delete the database before deploying but I get an error when trying to delete. I rebooted the server.
(SQL Server 2005 R2, Windows Server 2008R2.)
Error 1 File system error: The following file is corrupted: Physical file:
?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataHeidtman Sales Cube.0.dbDim Age.0.dim5.Dim Age.Dim Age.dstore. Logical file . Errors in the metadata manager. An error occurred when loading the Age dimension, from the file, '?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataHeidtman Sales Cube.0.dbDim Age.5.dim.xml'. Errors in the metadata manager. An error occurred when loading the Heidtman DW cube, from the file, '?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataHeidtman Sales Cube.0.dbHeidtman DW.7.cub.xml'. 0 0
View 3 Replies
View Related
Sep 2, 2007
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
View 3 Replies
View Related
Jul 23, 2005
Hello,I am trying to recover a SQL Server 7 database from another hard diskdrive that has a corrupted Windows 2000 Advanced Server installation. Iam not able to repair the corrupted Windows 2000 Advanced Serverinstallation but the file system is intact. I have installed a new copyof SQL Server 7 onto a new hard disk and have used the sp_attach_dbsystem stored procedure to attach the database from the old hard driveinto the new installation of SQL Server 7 on the new hard drive. Thedatabase shows up in the Enterprise Manager View and all the data andstructure are there, but when I try to run a Web site that uses ODBCconnections to the database I get the following error:ODBC Error Code = 08001 (Unable to connect to data source)[Microsoft][ODBC SQL Server Driver][Named Pipes]Specified SQL servernot found.I have double-checked that all the NTFS permissions, ODBC DSNs, and WebServer settings are correct and when I run the SQL Server ODBC drivertest at the completion of each ODBC DSN setup, it is successfull.1) Why am I getting this ODBC error?2) What steps have I missed in the recovery process?3) If I have done something wrong recovering my database, can I stillrecover it since I still have: a) The old master database file and logfile; b) The old database (non-master) file and log file; c)A backed-up(Enterprise Manager -> Right Click A Database -> All Tasks -> BackupDatabase) copy of the old database (non-master) file; ?My System Specifications:-Windows 2000 Advanced Server-SQL Server 7-IIS 5.0-Cold Fusion Server 4.5 Professional Full EditionThanks For Your Time,Nathan
View 2 Replies
View Related
Sep 17, 2015
Pages on a full recovery model database corrupted, need to ensure data loss is minimal for restore operation am thinking about restoring the latest full backup.
View 4 Replies
View Related
Jun 12, 2007
How to repair a corrupted OLAP database?
View 2 Replies
View Related
Mar 24, 2006
I know allot of folks are having this problem and I tried lots of things but nothing works. I understand the problem is coping the SQL Express on another server is the problem - I just not sure what to do?
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
This is the last statement on the Stack Trace:
SqlException (0x80131904): An attempt to attach an auto-named database for file e:wwwdata81d0493fwwwApp_DataTestDatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091
I checked my server forum and they said I had to name a database:
Example: Database=(unique name);
But this didn't work either.
I just tried a simple web project that has only one database and one table in SQL Express with one sqldatasource and one datagrid. It works fine on my pc but when I use the copy function in Visio Studio 2005 Pro - I can't run the site on the remote server: www.myjewelrydirect.com
I tried coping the database manually. I tried disconnecting the database before I copy it. Below is my connection statement:
<connectionStrings>
<add name="TestDB" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|TestDatabase.mdf;Integrated Security=True;User Instance=True"
providerName="System.Data.SqlClient" />
</connectionStrings>
With all the comments in these forums - this must be a bug.
I have been working on this problem for over 2 weeks - HELP!
View 1 Replies
View Related
Jul 31, 2007
Hi Everyone,
when i am trying to attach a 'xxx.mdf' file it is showing message 'xxx.mdf' is not a primary database file.
Please suggest me what could be the reasons and what are the possible ways to recover my database.
I have lot of important data in the database.
Thanks and Regards,
Shashidhar
View 7 Replies
View Related