one value should be always positive in report
I just replace "-" to " " using Replace(Fields!sumamount.Value,"-","") and format is currency like $ 1234.12
but after replace I get 1234.1200 in report
format of cell is currency like $ 1234.12 and if I don't use replace - it's ok
how to remove two last zero and add "$" ? or may be other ideas how to show alway positive value ?
I have the following query
OutPut:
ChildName BillPayerName Cost
Mary Fred £50
Total Balance Blank
The problem is when I check for a value > 00.1 in the having clause the total balance column disappears.
But its ok if I use any other comparison operator.
I.e < 00.1.
Any ideas.
create procedure Rpt_pos1 --(@cmb1 as varchar(50)) with ENCRYPTION as
--declare @startdate smalldatetime
AS
set dateformat ymd
set datefirst 7
--loop through weeks
create table #getTable (thesite integer null,thechild integer null,cost money null)
insert #getTable select s.siteid,c.childid,0
from site s,child c
where --s.siteName=@cmb1
c.siteID=s.siteID
and c.active=1
and c.potential=0
insert #getTable
select s.siteid,c.childid,isnull(sum(round(bt.total,2,2)),0)*-1
from site s,child c,billingTotal bt
where --s.siteName=@cmb1
s.siteID=bt.siteid
and c.siteID=s.siteID
and bt.siteID=s.siteID
and bt.childid=c.childid
and c.active=1
and c.potential=0
group by s.siteID,c.childid
insert #getTable select s.siteid,c.childid,isnull(sum(round(p.amount,2,2)),0)
from site s,child c,payment p
where --s.siteName=@cmb1
p.siteID=s.siteid
and c.siteID=s.siteID
and p.childID=c.childID
and c.active=1
and c.potential=0
group by s.siteID,c.childid
create table #results (ChildName varchar(200) null,BillPayerName varchar(200) null, Cost varchar(20) null)
insert
#results
select c.forename + ' ' + c.surname
,case b.telhome when '' then b.Forename + ' ' + b.Surname
else b.Forename + ' ' + b.Surname + ' (' + b.telhome + ')' end
,case when sum(round(g.cost,2,2)) < 0 then cu.Symbol + cast(sum(round(g.cost,2,2)) as varchar(15))
when sum(round(g.cost,2,2)) > 0 then cu.Symbol + cast(sum(round(g.cost,2,2)) as varchar(15))
when sum(round(g.cost,2,2)) = 0 then cu.Symbol + cast(sum(round(g.cost,2,2)) as varchar(15)) end
from
#gettable g
,child c
,billpayer b
,currency cu
,site s
where
cu.currencyid=s.currency
and s.siteID=c.siteID
and c.siteID=g.thesite
and c.childID=g.thechild
and b.billpayerID=c.billPayerID
group by
c.forename,
c.surname,
b.telhome,
b.surname,
b.forename,
c.siteID,
cu.symbol
having sum(round(g.cost,2,2)) > 00.1
order by
c.surname asc
insert #results
select '','',''
insert #results
select
'Total Balance'
,''
,c.Symbol + cast(sum(round(g.cost,2,2)) as varchar(15))
from
#gettable g
,site s
,currency c
where
g.thesite=s.siteid
and c.currencyID=s.currency
group by
c.symbol
having sum(round(g.cost,2,2)) > 00.1
drop table #gettable
select * from #results
drop table #results
go
I need to be able to check & display people who have a positive value in the bills.
i.e > 1p.
On the billingtotal table i need to sum > 1p.
CREATE PROCEDURE rpt_PositiveAccountBalances
(@cmb1 as varchar(100)) WITH ENCRYPTION
AS
BEGIN
SELECT DISTINCT
Site.siteName,
Child.surname + ', ' + Child.forename AS ChildsName,
billPayer.surname + ', ' + billPayer.forename AS BillPayerName,
BillingTotal.total
FROM
Site
INNER JOIN
Child
ON
Site.siteID = Child.siteID
INNER JOIN
BillingTotal
ON
Site.siteID = BillingTotal.siteID
CROSS JOIN
billPayer
WHERE
site.sitename=@cmb1
END
Hey guys,
I have a very peculiar issue going on. I have a table that contains a decimal(18,2) column called "Amount". Looking at this table through Enterprise Mgr, I can see that there are values in there that are negative. However, when I run a query in Query Analyzer, it displays all the negative values as positives.
The only workaround I've found right now is to change the column type to "real" and then change it back to decimal(18,2), and it starts showing the negatives as negative. However, without performing this absurd workaround, it doesn't work.
Is there a known bug in QA that would manifest itself as this? What is the cause for this?
Thanks in advance.
Hi,
I have table with a column which has both negative and positive values.
I want to calculate the sum of positve values and the sum of negative values from that column separately. Is it possible.
Plase help me.
Ex: My Input Values are
column1
-186.5499257
-141.8985222
-95.3846883
-71.1359768
-69.39071172
30.44750844
40.33666032
53.81527872
98.2967252
112.948667
OutPut goes like This
Column1 Column2
-186.5499257 null
-141.8985222 null
-95.3846883 null
-71.1359768 null
-69.39071172 -564.36
30.44750844 null
40.33666032 null
53.81527872 null
98.2967252 null
112.948667 335.84
I was just wondering if there is a way of converting a number from negative to positive within Reporting Services, ie remove the "-" sign from the front of the number? One of the columns within my report contains a calculation which results in an integer, but it is always a negative number, even though it should really be positive (it would take too long to describe the exact reason for this, but it's to do with the underlying database, which I don't have access to anyway). When I right-click on the relevant cell within the table in Layout view in the Report Designer and go to Expression, there is a list of Conversion functions under the "Common Functions" heading but I can't find anything there which would convert a number from negative to positive. Does anyone know how this can be achieved?
View 5 Replies View Related
I want to convert a positive value to a negative value.
How do I do it...
I have a query that brings in a result from a table that I have to display as a negative, so I use ABS (tbname.fieldname) *-1
This works fine. (Learnt it here from a previous post.)
I have another query that brings in a result from the same table but as a postive. So that works fine too.
Now, I need to sum them together in a new query. If the total value is a positive, fine. If the total value is a negative, it displays as a positive.
My question. Is it actually possible to achieve what I'm trying to do?
Output example below - narrow result for testing.
idpt2 Value2SumQty
N1141307-80970 3.80 2
N1141S2G00009D070 26.16 2
The 3.80 is correct, it is a positive.
The 26.16 is incorrect as it is the output from sum 235.44 -261.6 so I need it to display as -26.6
Ok, I have a table with IP addresses stored in decimal format using both positive and negative numbers.
The way that they are stored is:
Positve
1 thru 2147483647 = 0.0.0.1 - 127.255.255.255
Negative
-2147483648 thru -1 = 128.0.0.0 - 255.255.255.255
Conversion
positive
x/2^24 . (x/2^24)/2^16 . etc . etc
negative
(x+2^32)/2^24 . ((x+2^32)/2^24)/2^16 . etc . etc
I have a script which works by using UNION and the WHERE statements are x>0 x<0
My problem is I need to use a 3rd party app to run the script (McAfee ePO). McAfee does not recognize the UNION. My question is, can I acheive the same results as the script below, without using UNION.
SELECT ReportFullPathNode.FullPathName,
cast(cast(IPSubnetMask.IP_Start as bigint)/16777216 as varchar) + '.' +
cast(cast(IPSubnetMask.IP_Start as bigint)%16777216/65536 as varchar) + '.' +
cast(cast(IPSubnetMask.IP_Start as bigint)%16777216%65536/256 as varchar) + '.' +
cast(cast(IPSubnetMask.IP_Start as bigint)%16777216%65536%256 as varchar),
cast(cast(IPSubnetMask.IP_End as bigint)/16777216 as varchar) + '.' +
cast(cast(IPSubnetMask.IP_End as bigint)%16777216/65536 as varchar) + '.' +
cast(cast(IPSubnetMask.IP_End as bigint)%16777216%65536/256 as varchar) + '.' +
cast(cast(IPSubnetMask.IP_End as bigint)%16777216%65536%256 as varchar),
cast(IPSubnetMask.LeftMostBits as varchar),
IPSubnetMask.IP_Start
FROM IPSubnetMask, ReportFullPathNode ReportFullPathNode
WHERE IPSubnetMask.IP_Start>0 and IPSubnetMask.ParentID = ReportFullPathNode.LowestNodeID
UNION ALL
SELECT ReportFullPathNode.FullPathName,
cast(cast(4294967296+IPSubnetMask.IP_Start as bigint)/16777216 as varchar) + '.' +
cast(cast(4294967296+IPSubnetMask.IP_Start as bigint)%16777216/65536 as varchar) + '.' +
cast(cast(4294967296+IPSubnetMask.IP_Start as bigint)%16777216%65536/256 as varchar) + '.' +
cast(cast(4294967296+IPSubnetMask.IP_Start as bigint)%16777216%65536%256 as varchar),
cast(cast(4294967296+IPSubnetMask.IP_End as bigint)/16777216 as varchar) + '.' +
cast(cast(4294967296+IPSubnetMask.IP_End as bigint)%16777216/65536 as varchar) + '.' +
cast(cast(4294967296+IPSubnetMask.IP_End as bigint)%16777216%65536/256 as varchar) + '.' +
cast(cast(4294967296+IPSubnetMask.IP_End as bigint)%16777216%65536%256 as varchar),
cast(IPSubnetMask.LeftMostBits as varchar),
IPSubnetMask.IP_Start+4294967296
FROM IPSubnetMask, ReportFullPathNode ReportFullPathNode
WHERE IPSubnetMask.IP_Start<0 and IPSubnetMask.ParentID = ReportFullPathNode.LowestNodeID
I've a stacked column chart (vertical) both with positive and negative value.
I want an horizontal line only for the value = 0.
I tried to add a serie and to plot it as line, but I see it in the legend and I don't want to see it.
Can I show the gridlines only for the value 0?
Simona
Sorry if this question has been answered before--i tried a search but nothing came close to what i needed.
I have a report I am creating where I need to group on whether a number is positive or negative. The number will never be zero. This number is a decimal (currency), if that makes a difference.
I have tried creating a formula field with the following expression:
Code Snippet
IIf(Fields!Num.Value > 0, 1, 0)
I tried creating a group using this field (essentially, positive = 1 and negative = 0), but it gave me no results at all.
If you need any more information, please let me know and I will provide what I can. Thanks for your answers!
How do I count the number of positive dollar values in a query? I have various negative and positive dollar values and want to count how many positive I have then I will know how many are negative. I cannot put >0 or >0.00 in the where because it still returns everything cuz the programmer set the datatype to be money
View 4 Replies View RelatedI have a table that displays a bunch of data based on their percentage changes.
There is a parameter (let's say 5%) that the user can set to display only the data which either increased more than 5% or decreased more than 5%.
I want to have a space between the positive changes and the negative changes. ie, to create a blank row between the +'s and the -'s. Does anyone know of a way to do this?
Thanks,
Steven
I am doing some analysis on our customer base and their payment profiles. I have generated two profile strings, one for whether the balance of an account has gone up or down and one for the size of the balance in relation to the normal invoice amount for the customer. So (for example) the balance movement string will look like this:
UUUDUUUDUUUD-D00 Where U = Up, D = Down, - = no change and 0 = no change and no balance
I want to analyse these strings in two ways. The first is that I want to find customers with a similar pattern: in the example below the first and last patterns are the same, just one out of sync but should be considered the same
Movement Multiple CountRecords
UUUDUUUDUUUD1230123012301175
------------0000000000001163
UDUUUDUUUDUU3012301230121082
The second type of analysis is to find customers whose pattern has changed: in the examples above the patterns are repeated and therefore 'normal' in the records below the patterns have changed in that the first part does not match the second part.
Movement Multiple CountRecords
UUDUUUDUUUUU-----------07
UDUUUDUUUUUU------------7
good way to approach this without either a cursor or a hidden REBAR. The challenge as I see it is that I have to interrogate every string to find out if there is a repeating pattern and if so where it starts and how long it is (heuristic because some strings will start with a repeating pattern and then the pattern may change or deteriorate) and then compare the string for N groups of repeating characters to see if and when it changes and I can't think of an efficient method to do this in SQL because it is not a set based operation.
MS SQL Server 2008 R2
I have both positive and negative values in a single column, where I want sum total of positive values & negative values. Is there any Expression for this to sort out.
I have a requirement to use DateDiff(Months,DateTime1,DateTime2) and this must return positive integer values.
Currently negative numbers are being returned because DateTime1 < DateTime2  or DateTime1 > DateTime2 .
The DateTime1 and  DateTime2  values are dynamic and either of them can be bigger than the other.
Any query solution so that always positive value is returned.
I have a 2012 report builder chart that has two series (one area chart and one bar chart) combined into one chart. The problem I'm having is the bar chart has much smaller numbers than the area chart and the scaling is messed up.
Is there any way to put the bar chart on the right axis and keep the area chart on the left axis? My goal is to increase the size of the bar chart in relation to the area chart.
Also, is there any way to make the bar chart color red if the number is negative and green if it is positive?
Why does M$ Query Analyzer display all numbers as positive, no matterwhether they are truly positive or negative ?I am having to cast each column to varchar to find out if there areany negative numbers being hidden from me :(I tried checking Tools/Options/Connections/Use Regional Settings bothon and off, stopping and restarting M$ Query Analyer in betwixt, butno improvement.Am I missing some other option somewhere ?
View 7 Replies View RelatedI have created SSRS report which has many overlapping objects, the output in PDF format seems to good but in word format it is not giving the required output.
View 5 Replies View RelatedWe are migrating data from old DB2 systems to sql server 2012, the DATE FORMAT in those systems is in decimal format with 7 digits. CYYMMDD format.
I need to convert this into DD/MM/YYYY format.
I have date coming to one page as a string in the following format"May 4 2005 12:00AM"
I need to query one of my tables using this date in combination of other nondate values. How can I convert this date into valid sql server datetime format before I query a database tables
Please help
I have a table which stores date-of-birth in varchar 19861231(yyyymmdd). A view takes this data. I want to store this date as mmddyyyy in the view. How can we achieve this?
View 18 Replies View RelatedHi,
I have a set of csv files and a set of Format Specification files for each of the csv files. I need to convert the csv files into another format of csv files as specified in the Format Specification files. All the columns of the input csv files do not have a mapping with the columns of the output csv files. How can I achieve this using SSIS ? This is an urgent requirement. Please reply asap. Thanks.
Hello Expert!
I need help to I translate this data...
Table "LeaveDetail"
StaffNo | StartDate | EndDate | LeaveType |
1 | 23/04/2006 | 26/04/2006 | AL |
2 | 24/04/2006 | 25/04/2006 | MC |
3 | 26/04/2006 | 27/04/2006 | EL |
1 | 30/04/2006 | 02/05/2006 | EL |
Into this format...
|Apr|Apr|Apr|Apr|Apr|Apr|Apr|Apr|May|May|May|May|
StaffNo |23 |24 |25 |26 |27 |28 |29 |30 |01 |02 |03 |04..
---------------------------------------------------------
1 |AL |AL |AL |AL | | ... |EL |EL |EL |
2 | |MC |MC | | |
3 | | | |EL |EL |
Parameter:
Date From e.g. 23/04/2006 to 23/05/2006
Using only query statement...
Is this possible??
TIA
Regards.
Hi All,
I am stuck at one place, where I have to convert CSV format file data into SAP IDOC format file. In SSIS we don't have any such SAP adapter (though we have .NET Data Provider for mySAP suite [SSIS SAP Adapter] but this is still not fully supported by Microsoft, plus it doesn't have feature to convert data into IDOC format) that can do this. Can someone here please provide me some pointers on any third party adapters available in market to do this job or if anyone has already developed some custom approach to achieve this task?
Your quick response on this is highly appreciated.
Regards,
Kuldeep Chauhan
dear all can anybody help me soon....
i am using visual studio 2005 webapplication based on sql server 2005 database.
i can get one date from sql using one query.
I am selecting my field based on following code CONVERT(varchar, Oman.Positions.Datum, 9) AS LastUpdate
this case my output is May 4 2008 3:19:45:000AM.....
this output is correct but from this output i want to avoid millisecond part.
ie i want the output like May 4 2008 3:19:45 AM....
how i can do this
regards
E.g, i have a store procedure. The start date is long date (4/15/2007 3:00pm). i want to select the start date with a particular date (short date format 4/15/2006). Thanks in advance.
View 1 Replies View RelatedI have a table that has a DATE field named. AccountingDate that is in the format YYYY-MM-DD. It's not a VARCHAR field. I simply want to convert this date field into the format MM/DD/YYYY and call it New_Accounting_Date.
I've played with various combinations of CAST & CONVERT but haven't been able to get it to work.
Below is my latest effort which returns the error:
Incorrect syntax near the keyword 'as'
What code would work to return a MM/DD/YYYY value for New_Accounting_Date?
Select GLBATCH.AccountingDate,
convert(GLBATCH.AccountingDate as date),101) AS New_Accounting_Date
from GLBATCH
Hi
I am trying get my VB6 application to insert a record into a table (SQL Express) which has a datetime column but it would not process if the data format is differ to *American Date format*.
The date() function in VB returns 15/11/2006 which is in Australian Date format (DD/MM/YYYY) according to my setting in "Reginal and Lanuage Option-> Locale 0> English (Australia)" setting.
I get the following error:
Msg 242, Level 16, State 3, Server KITSQLEXPRESS, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
The statement has been terminated.
My computer's locale is set to English (Australia) and I expect the datetime format would follow what is set in system locale
I've read an article somewhere on the net about how SQL 2005 eliminate the confusion of date conversion when read/write datetime records into a table...but it seems to me that it is still as in-flexible as MS Access
Is there a setting in the database that takes care of it?
Thanks
Hi,
I have a column date in my database which I should send it to Oracle database. The Date format in Oracle is number. I don’t know how should I convert the date to that format?
Example :
SQL FormatOracle Format
02/16/05 105046
Thanks.
hi siri have table hh .it has two columnsone is hhno is integer datatype another hhdoc is xml data type likehh tablehhno hhdoc---------------------------------------------------------------------------------------------100<suresh>sfjfjfjfjf</suresh>....................................101<ramesh>hhfhfhf</ramesh>..................................how to convert the xml data format into the general data format plshelp me with examples
View 1 Replies View RelatedHi All, I have a serial number field in table. Field type is integer. It is just stored as 1,2,3,12,13, etc.It is showing as 00001,00002,00003,00012,00013 in interface. C# string format is very easy to changed the format.But when i export to excel there is a problem. Let me know how to format string in SQL and export to excel.ThanksAung
View 3 Replies View Relatedi am trying to bcp a data file to a sql table that have diffn formats. the conds are as follows -
1]the last 2 columns of the table need to be omitted
2]the first 2 fields of the data file correspond to the first 2 coulmns of the table and need to be imported
3]the last 2 fields of the data file need to be ommitted
the data in the txt file is as follows -
xxxxxxxx~xxxxxxxx~xxxxx~xxxxx
yyyyyyyy~yyyyyyyy~yyyyy~yyyyy
.....
the format file i use is -
7.0
4
1 SQLCHAR 0 32 "~" 1 C_ALIAS
2 SQLCHAR 0 254 "~" 2 C_DESC
3 SQLCHAR 0 0 "" 0 ENABLED
4 SQLCHAR 0 0 "" 0 SECNAME
5 SQLCHAR 0 0 "~" 0 c2_alias
6 SQLCHAR 0 0 "
" 0 C_DESC2
when i try to bcp data in using the format file i get error -
Unable to open BCP Host Data File
Can anyone tell me what i am doing wrong.
Thanks