I have the following sql:SELECT courseModuleCode FROM courses WHERE courseCode like '%' + @prefixText + '%'UNION
SELECT courseName FROM courses WHERE courseName like '%' + @prefixText + '%'
UNIONSELECT TeacherName FROM courses WHERE TeacherName like '%' + @prefixText + '%' it returns one column, i want to name tha column as "words"how do i do it?thanks
I have a web page that has been in production for over a year. On occasion the web app users report sporadic errors which last a few minutes then go away. The page loads up a generic DataSet, and then that DataSet is assigned to a datagrid on the page. The error is that a column that is expected to be in the dataset is not found. I know this column must exist in the database because its a required field. After we reset IIS, then all returns to normal and the errors go away. Below is the stack trace.
Exception: System.IndexOutOfRangeException Message: Cannot find column LastName. Source: System.Data at System.Data.DataTable.ParseSortString(String sortString) at System.Data.DataView.UpdateIndex(Boolean force) at System.Data.DataView.SetIndex(String newSort, DataViewRowState newRowStates, DataFilter newRowFilter) at System.Data.DataView..ctor(DataTable table, String RowFilter, String Sort, DataViewRowState RowState) at MySystem.Web.GuestSearch.ShowResults(DataSet ds, Int32 currentPageIndex) at MySystem.Web.GuestSearch.LoadResults(Int32 currentPageIndex) at MySystem.GuestSearch.btnSearch_Click(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) at System.Web.UI.Page.ProcessRequestMain()
Our DBA can find no problems on the database side and our web servers don't log any system event problems either. I do not understand why resetting IIS helps the issue. I need to find the real cause of the problems rather than just resetting IIS all the time. Any ideas?
say i have a table, and in it are two columns, column1 and column2 and i do the following query:
SELECT column1, column2 FROM table WHERE column2 = '12345'
i want to check if column1 has all the same values, so in the first case, no
column1 column2
------- --------
4 12345
9 12345
5 12345
column1 column2
------- --------
9 12345
9 12345
9 12345
in the 2nd case, column1 contains all the same values, so yes
is there anyway i can check this? i would be doing this in a trigger.. say when a new row is inserted, the value of column1 is inserted, but col 2 is null.. so when they try to fill in the value for col2 of that row, the trigger checks to see if the value they put for col 2 is already in the table.. if it isn't, then everything is ok. but if it is already in teh table, then it checks col1 to see if all the values of col1 are the same
i hope this makes sense
thanks
Hi All,
Is there a way to hide a column if there is no data for that column? Suppose that I have a SP (lets call it wrapper) which will call multiple SP's. But for any one run, there'll be only one SP which is called. But the columns returned by these SP's is obviously different. So, in order to accomodate the output, can I create a table, add all the possible columns to it, and set the properties of the individual columns such that they will be hidden if there is no data in them? Example, SP 1 returns - ServerName, Location, OS ; SP 2 returns ServerName and location only. Now if the wrapper SP calls only the second SP (SP 2) can I configure in such a way that the third column (OS) is not displayed at all? (In normal cases, it would appear but without any data in it)...
Hope the question is clear... Thanks a lot..
Manoj.
Hi there,
I¡¦ve got a table with the following as well as other info:
User ID
DirectoryTypeID (int)
Region ID (int)
I need to run a query where I could get the region ID, then, in the second column, I¡¦d get all distinct directory types within that region. For example, if I run the query:
subRegionAreaID directoryTypeID
--------------- ---------------
3 1
3 2
3 3
3 9
If need these results to be:
subRegionAreaID directoryTypeID
--------------- ---------------
3 1, 2, 3, 9
Is this possible?
Many Thanks!! ļ
Grazi
Hello,
I have a select statement that looks like this:
SELECT TOP 10 [Id], [Abstract] FROM NewsArticles
Abstract is a TEXT Column. I'd like to limit it to 50 characters... how would I do that.
Thanks,
-- shawn
Hi
In a query in Management Studio, I want to output data to a text file (via Results in text button) without column names and hyphens or dashes, I have searched all SET commands with bad luck because SET FMTONLY OFF do exactly the opposite.
I know this could be a silly question because I have received suggestions in other ways to do that, but I am intrigued If there is a way to prevent column name from being displayed/returned from a query.
@@version yields
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
Thank you very much, best regards
japonce
I am building reports against our TFS development db.
One of the reports tracks days spent (Dwell Time) in various status categories (eg: New, Assigned, In Development, Hold, etc) for a given "ticket".
For a fixed list of values from {Work Item].System_State, I can send the results (days in Assigned) to the column named (Assigned) for each status for each event in the [Work Item History], and then sum them for each ticket as:
Ticket ID New Assigned InDev etc
1230001 2 0 0 ...
1230001 0 1 2 ....
SUM 2 1 2 ....
However, I have many different Projects, each of which use their own Status names.
I don't want to duplicate the same basic report, if I can avoid it.
How can I name and generate this data for the unique Status list for each Project?
Simplest analog is: name = First(Fields!Status.Value, "TFSdb")
and allows value for a column name (category) as: =IIF(Fields!Status.Value = First(Fields!Status.Value, "TFSdb"), Fields!Days.Value, 0)
However this fails beause:
1. It only delivers the FIRST status value, and,
2. I cannot SUM an expression which is itself an aggregate (using First).
I have a question regarding the values returned in the SEARCHABLE column of the system stored procedure sp_datatype_info. What do ALL of the values mean? The SQL Server BOL only provides meanings for the values 0 and 1, but I am also seeing values 2 and 3. What are the meanings of these values?
Thanks,
Sean
I can preview the SQL command in the OLE DB Source Editor and bring back all columns and results just fine but when I click on the Columns I get
TITLE: Microsoft Visual Studio
------------------------------
The component reported the following warnings:
Error at Data Flow Task [OLE DB Source [1]]: No column information was returned by the SQL command.
The columns are there in the preview - why can't SSIS get the column information?
Hi, I was wondering if any SQL Server gurus out there could help me...I
have a table which contains text resources for my application. The text
resources are multi-lingual so I've read that if I add a html language
indicator meta tag e.g.<META NAME="MS.LOCALE" CONTENT="ES">and
store the text in a varbinary column with a supporting Document Type
column containing ".html" of varchar(5) then the full text index
service should be intelligent about the language word breakers it
applies when indexing the text. (I hope this is correct technique for
best multi-lingual support in a single table?)However, when I come to query this data the results always return 0 rows (no errors are encountered). e.g.DECLARE @SearchWord nvarchar(256)SET @SearchWord = 'search' -- Yes, this word is definitely present in my resources.SELECT * FROM Resource WHERE CONTAINS(Document, @SearchWord)I'm a little puzzled as Full Text search is working fine on another table that employs an nvarchar column.Any pointers / suggestions would be greatly appreciated. Cheers,Gavin.
Hi, I was wondering if any SQL Server gurus out there could help me...
I have a table which contains text resources for my application. The text resources are multi-lingual so I've read that if I add a html language indicator meta tag e.g.
<META NAME="MS.LOCALE" CONTENT="ES">
and store the text in a varbinary column with a supporting Document Type column containing ".html" of varchar(5) then the full text index service should be intelligent about the language word breakers it applies when indexing the text. (I hope this is correct technique for best multi-lingual support in a single table?)
However, when I come to query this data the results always return 0 rows (no errors are encountered). e.g.
DECLARE @SearchWord nvarchar(256)
SET @SearchWord = 'search' -- Yes, this word is definitely present in my resources.
SELECT * FROM Resource WHERE CONTAINS(Document, @SearchWord)
I'm a little puzzled as Full Text search is working fine on another table that employs an nvarchar column.
Any pointers / suggestions would be greatly appreciated. Cheers,
Gavin.
I have a strange problem. I have some code that executes a sql query. If I run the query in SQL server query analyzer, I get a set of data returned for me as expected. This is the query listed on lines 3 and 4. I just manually type it into query analyzer.
Yet when I run the same query in my code, the result set is slightly different because it is missing some data. I am confused as to what is going on here. Basically to examine the sql result set returned, I write it out to an XML file. (See line 16).
Why the data returned is different, I have no idea. Also writing it out to an XML file is the only way I can look at the data. Otherwise looking at it in the debugger is impossible, with the hundreds of tree nodes returned.
If someone is able to help me figure this out, I would appreciate it.
1. public DataSet GetMarketList(string region, string marketRegion)2. {3. string sql = @"SELECT a.RealEstMarket FROM MarketMap a, RegionMap b " + 4."WHERE a.RegionCode = b.RegionCode"; 5. DataSet dsMarketList = new DataSet();6. SqlConnection sqlConn = new SqlConnection(intranetConnStr); 7. SqlCommand cmd = new SqlCommand(sql,sqlConn);8. sqlConn.Open();9. SqlDataAdapter adapter = new SqlDataAdapter(cmd); 10. try11. {12. adapter.Fill(dsMarketList);
13. String bling = adapter.SelectCommand.CommandText;//BRG 14. dsMarketList.DataSetName="RegionMarket"; 15. dsMarketList.Tables[0].TableName = "MarketList"; 16. dsMarketList.WriteXml(Server.MapPath ("myXMLFile.xml" )); // The data written to 17. myXMLFile.xml is not the same data that is returned when I run the query on line 3&4 18. // from the SQL query 19. } 20. catch(Exception e) 21. { 22. // Handle the exception (Code not shown)
Hi Experts,
I am extracting data from SQL Server 2005 to flat file destination. I am using SQL Command to specify the data selection query. One of my query uses Replicate function to derive a column value. When I execute this package it fails with the error "Data conversion failed. The data conversion for column "value" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page".
The reason for the problem is that, it is taking the InputColumnWidth of the flat file destination as 8000 and I specified the OutputColumnWidth as 4.
If I change the OutputColumnWidth to 8000, it is working without any error but resulting in the column width of 8000.
I tried using DerivedColumn Transformation's Type cast and DataConversion Transformation but still I am getting the same error in the respective Transformation components.
Can anyone suggest how to solve this issue.
Stored Procedure:CREATE PROCEDURE [dbo].[GetBanner] @BannerPage nvarchar(50), @MagazineID intASBEGIN SET NOCOUNT ON; DECLARE @BannerID int SELECT TOP 1 @BannerID = BannerID FROM Banners WHERE BannerPage=@BannerPage AND MagazineID = @MagazineID AND StartDate <= GetDate() AND EndDate >=GetDate() ORDER BY Views SELECT BannerID, BannerFileName, AltText, URL, Views FROM Banners WHERE BannerID = @BannerID UPDATE Banners SET Views = Views +1 WHERE BannerID = @BannerID UPDATE BannerStats SET Views = Views + 1 WHERE BannerID = @BannerIDEND OnSelected method: protected void dsBanner_Selected(object sender, SqlDataSourceStatusEventArgs e) { int RecordCount = e.AffectedRows; Response.Write(RecordCount); } This ALWAYS gives me 0 - despite the fact that the correct banner is pulled from the database, and updated etc. Also, when I execute the procedure (for valid parameter values) in SSMS, I get "1 row(s) Affected". Can anyone tell me what I need to change to get the proper value? Thanks
View 6 Replies View RelatedI have a table that COULD be linked to 3 other tables, but if one of the link fields is zero I get nothing back at all. Here is my query:
SELECTEvents.*, Agencies.A_NAME AS A_NAME,
(Families.F_FNAME + ' ' + Families.F_LNAME) AS F_NAME,
(Candidates.C_FNAME + ' ' + Candidates.C_LNAME) AS C_NAME
FROM Events
INNER JOIN Agencies ON Events.E_AGENCY_ID = Agencies.A_ID
INNER JOIN Families ON Events.E_FAMILY_ID = Families.F_ID
INNER JOIN Candidates ON Events.E_CANDIDATE_ID = Candidates.C_ID
WHEREE_ID = 89
Even if all the inner join id's are zero, I would at least like to get back the event information.
Could anyone help me out here, or do I have to do 4 queries?
Thanks in advance.
The following sproc returns no records in query analyzer, although it doesn't error out either. Last time adding the length to the end of the variable fixed this problem, but this time it's an integer type which doesn't accept a length. Any ideas?
----------------------------------------------------------------------------------------------------
CREATE PROCEDURE spUnitsbyUnitID
@unitid int
AS
SELECT
E.camid, E.camname, E.cammodel, E.unitid,
D.contactid, D.Contactfname, D.Contactlname, D.Contactphone, D.Contactcell, D.Contactcompany, D.unitid,
C.videoserverid, C.videoservermac, C.videoserveruser, C.videoserverpass, C.videoservermodel, C.videoserverip, C.unitid,
B.radioid, B.radioip, B.radiomac, B.radioessid, B.radiouser, B.radiopass, B.unitid,
A.unitid, A.unitcity, A.unitname, A.unitalias, A.unitdeploydate, A.unitpickupdate, A.unitattatchedcams, A.unitenabled
FROM tbl_units as A
INNER JOIN tbl_radios as B ON A.unitid = B.unitid
INNER JOIN tbl_videoservers as C ON A.unitid = C.unitid
INNER JOIN tbl_contacts as D on A.unitid = D.unitid
INNER JOIN tbl_cameras as E on A.unitid = E.unitid
WHERE A.UnitID = @unitID
GO
-----------------------------------------------------------------------------------------------------
can anyone tell me why i get the following error when i run the below query? its a simple query. i dont understand why its throwing an error. Thanks in advance.
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
The statement has been terminated.
update purchaseorders set orderstatusID = 4 where purchaseorderid in (
select distinct postprocesspurchaseorderID from wishlistitems where postprocesspurchaseorderID is not null
)
Hi,
Any idea why when I run a SELECT stament in Query anaylser it returns 45 rows. But when I create the exact same SQL as a view in Enterprise manager it only returns 44 rows?
Thanks,
Alph
I am getting the below error while trying to run sql query
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
but if in the same below query if i put the parameter in upto 10 then its working fine......if the parameter is 11 or above then the query is giving the above error.
SELECT substring(sc.container_id,0,14) container_id,
imc.item_class,
sh.ship_to, sh.shipment_id,
cust.ADDRESS1,
sh.carrier,
[code]...
I am running a query that works just fine however, I would like it to exclude value that are equal to zero.
Basically my query looks at the commission that clients pay over a number of periods.
So it goes like this
T.Client_Code as Client
,SUM(CASE t.Transaction_Date WHEN DATEADD(day, DATEDIFF(day, 1, GETDATE()),0)THEN (ABS (t.transaction_commission) /((fx.Exchange_Bid + fx.Exchange_Ask)/2 )) ELSE 0 END)as Commission_Day
FROM TABLE T
JOINING FX TABLE
WHERE
fx.Currency = 'USD'
And T.Salesman_Name in ('X''Y'Z)
Group BY
T.Client_Code
It works perfectly fine however, we dont transact with our clients everyday so therefore this list will return all of our clients in the database and many will have generate zero commission. I want to keep the query along those lines I just need to insert something that says "ONLY SHOW WHEN Commission is not ZERO.
i am trying to run Select query to get "application name" and "role" for each user in the DB problem is that each user has more than one App that he is useing and for each App he can have more than one role
My code is:
Code:
select top 100
username,
(Select b.name
from application b
inner join userroleapplication c
on b.applicationID = c.applicationID ) Application,
(select name from role d, userroleapplication gr
where gr.roleID = d.roleID and gr.userID = a.userID) role
from users a
where username in
(
'username'
)
i know where is the problem but i cant figure how to fix this
What i need as a output
Username | Application | Role
"user1" | "App1" | "Role1"
"user1" | "App1" | "Role2"
"user1" | "App2" | "Role1"
"user1" | "App3" | "Role1"
"user2" | "App1" | "Role1"
"user2" | "App3" | "Role1"
etc.
Hi
I have two tables and I need write a query that include subquery that return more than 1 value,Can you give me a idea how to write the query
The table with data is like this,one file maybe belong to many group.
Filename FilegroupID
file1 1
file2 2
file1 3
file1 4
file3 1
file2 5
I need write a query to get the result like this
file1 1,3,4
file2 2,5
file3 1
I try to write a query with subquery but I get error message
"Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression"
I use SQL Server 2005.but I need the subquery return data like "1,3,4".
Please help me.
Thanks
Mark
Select * from table where field <> 'This'
Why does that not return nulls? 'This' does not equal null. Why does sql server work this way?
I have a simple update query that looks like this:
Update Table1 set midpointDate = (select dateadd(day,(datediff(day,startDate,endDate)/2),starteDate) from Table1) where Table1.RowID = Table1.RowID
I am receiving the following error: "Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."Yes, it is all contained in the same table.
I am using SQLExecute() in C++ code.
My query is "select * from Revoked_users"?
How I will come to know the no. of rows returned by SQLExecute() ?
Okay,
I want to fill a table in one database with some info from an identical table from another database. When I run this query, I get the following error:
"Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
The statement has been terminated."
But the point of the subquery was to in fact return more than one value.
Anyone know how I can null-out the returned values of the PrjMgr field? I have bolded the field in question.
Here is the code:
select AgencyId
,ControlNumber
,ISNULL(LLA_AUDITS.PrjMgr,Projects.PrjMgr) as PrjMgr,ISNULL(CASE LEN(datepart(mm, PeriodFinish)) WHEN 1 THEN '0' + CAST(datepart(mm, PeriodFinish) as varchar(2)) ELSE CAST(datepart(mm, PeriodFinish) as varchar(2)) END ,'')As month
,ISNULL(CAST(datepart(dd, PeriodFinish) as varchar), '') As day
,ISNULL(CAST(right(datepart(yy, PeriodFinish),2) as varchar),'') As year
,ISNULL(CAST(left(datepart(yy, PeriodFinish),2) as varchar),'') As century
,custName
from LLA_Audits Left Outer Join Projects
on controlnumber = prjcode Left Outer Join Customers on Agencyid = CustCode
where AgencyId is not null
and not(LLA_AUDITS.PrjMgr is null and Projects.PrjMgr is null)
and left(controlnumber,2)<>'72'
and left(controlnumber,2) <>'13'
and (CPAFirmId IN ('0','')or CPAFirmId is null)
order by ControlNumber
The code below returns 0 rows. The statement is intended as generic statement that would return all records between a particular start and end date and on each date only between a specific start and end time. It works perfectly if the end date is greater than the start date.
Unfortunately, if the start and end dates are equal (i.e, return all records on that one date and only between the specified start and end times) then no records are returned.
BTW, it is also looking for matching datetimes in two tables and there really is matching data in the two tables for that particular date and times.
Can anybody help resolve this?
SELECT DISTINCT t1.* FROM [DbName].[SchemaName].[TableName1] AS t1,
[DbName].[SchemaName].[TableName2] AS t2
WHERE t1.[DateTime] BETWEEN CAST('2006-11-22' AS DATETIME) AND CAST('2006-11-22' AS DATETIME)
AND t2.[DateTime] BETWEEN CAST('2006-11-22' AS DATETIME) AND CAST('2006-11-22' AS DATETIME) AND
CONVERT(DATETIME,CONVERT(varchar, t1.[DateTime],114)) BETWEEN
CONVERT(DATETIME, '10:20:00') AND CONVERT(DATETIME, '12:19:59') AND
CONVERT(DATETIME,CONVERT(varchar, t2.[DateTime],114)) BETWEEN
CONVERT(DATETIME, '10:20:00') AND CONVERT(DATETIME, '12:19:59') AND
t1.[DateTime] = t2.[DateTime]
ORDER BY t1.[DateTime];
Okay, this is what I have as my store procedure:
DECLARE @parentPage varchar(250)
-- Insert statements for procedure here
SET @parentPage = (SELECT [frntPage] FROM [OLissue], [Outlook] WHERE ([Outlook].[issueID] = @OLissueID AND [Outlook].[issueID] = [OLissue].[issueID] AND [OLissue].[frntPage] IS NOT NULL AND [Outlook].[parent] IS NOT NULL))
IF @parentPage IS NOT NULL
IF exists (SELECT [Outlook].[ID], [Outlook].[title], [Outlook].[name], [Outlook].[issueID] FROM [OLissue], [Outlook] WHERE ([Outlook].[issueID] = @OLissueID AND [Outlook].[issueID] = [OLissue].[issueID]))
SELECT [ID], [title], [name], [issueID] FROM [Outlook] WHERE ([issueID] = @OLissueID)
ELSE
SELECT DISTINCT NULL ID, 'No parent page yet' title FROM [Outlook]
And I kept getting this error when testing in SQL Management Studio.
Msg 512, Level 16, State 1, Procedure parentPage, Line 19
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
I have a simple report with a group header, details and footer. How do I display a message to inform users when no data is returned when they enter a parameter which returns no records - at the moment my report returns a blank screen, it would be more useful if I could output the following
'Parameter Name' does not exist.
I have a stored procedure that is going to be called from my ssis job. I create a package and it as an 'Execute SQL Task' within it. My stored procedure will return a 1 or 0. If 1 is returned then the package needs to continue processing. If
0 is returned then the job stops running.
How can I get the value that is being returned from the stored procedure and either continue or stop the job depending on what is returned?
I'm having problem Inserting data from 1table into another table. I'm getting the error:
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
I get the reason why I'm having this error message but I don't know how to fix code... Help please? Thanks
Here's an example of what I'm trying to do...
table1 has:
ID | Name | countryID
1 | Joe | 101
2 | Ben | 102
3 | Tom | 102
Now I wrote this code to insert some of the data from table 1 into table2...
insert into Table2(CompName, ID) values('Information',(select ID from table1 where countryid=102))
Please Help! Thanks...