Name Lookup 5 Times

Dec 17, 2004

Hi

I'm new in SQL. I have a big problem

Database: MSSQL 2000

I have two tables: (results) one with numeric results and one with names (importance_scale)

SELECT * FROM results

name i1 i2 i3 i4 i5
---- ---- ---- ---- ----
john 2 1 2 2 2
anna 0 2 2 2 2
phil 2 2 2 2 2
dave 1 0 2 2 2

SELECT * FROM importance_scale

imp_value imp_name
--------- ------------
2 very important
1 important
0 not important

i1,i2 etc. value it is a imp_value from table 'importance_scale'

I would like to make report which will show all results in this format (in example only first record):
name i1 i2 i3 i4 i5 etc.
----- --- --- --- --- ---
john very important important very important very important very important etc.

I was thinking about using CASE I don't want use cursor. What is the best way?

Thanks for your help

View 2 Replies


ADVERTISEMENT

Performance Expectations For Fuzzy Lookup Against 25mill Row Lookup Table

Oct 31, 2007

We did some "at scale" fuzzy lookup tests today and were rather disappointed with the performance. I'm wanting to know your experience so I can set my performance expectations appropriately.

We were doing a fuzzy lookup against a lookup table with 25 million rows. Each row has 11 columns used in the fuzzy lookup, each between 10-100 chars. We set CopyReferenceTable=0 and MatchIndexOptions=GenerateAndPersistNewIndex and WarmCaches=true. It took about 60 minutes to build that index table, during which, dtexec got up to 4.5GB memory usage. (Is there a way to tell what % of the index table got cached in memory? Memory kept rising as each "Finished building X% of fuzzy index" progress event scrolled by all the way up to 100% progress when it peaked at 4.5GB.) The MaxMemoryUsage setting we left blank so it would use as much as possible on this 64-bit box with 16GB of memory (but only about 4GB was available for SSIS).

After it got done building the index table, it started flowing data through the pipeline. We saw the first buffer of ~9,000 rows get passed from the source to the fuzzy lookup transform. Six hours later it had not finished doing the fuzzy lookup on that first buffer!!! Running profiler showed us it was firing off lots of singelton SQL queries doing lookups as expected. So it was making progress, just very, very slowly.

We had set MinSimilarity=0.45 and Exhaustive=False. Those seemed to be reasonable settings for smaller datasets.

Does that performance seem inline with expectations? Any thoughts to improve performance?

View 4 Replies View Related

Fuzzy Lookup Error When Adding Additional Lookup Columns

Sep 26, 2007

I'm working with an existing package that uses the fuzzy lookup transform. The package is currently working; however, I need to add some columns to the lookup columns from the reference table that is being used.

It seems that I am hitting a memory threshold of some sort, as when I add 3 or 4 columns, the package works, but when I add 5 columns, the fuzzy lookup transform fails pre-execute:

Pre-Execute
Taking a snapshot of the reference table
Taking a snapshot of the reference table
Building Fuzzy Match Index
component "Fuzzy Lookup Existing Member" (8351) failed the pre-execute phase and returned error code 0x8007007A.

These errors occur regardless of what columns I am attempting to add to the lookup list.

I have tried setting the MaxMemoryUsage custom property of the transform to 0, and to explicit values that should be much more than enough to hold the fuzzy match index (the reference table is only about 3000 rows, and the entire table is stored in less than 2MB of disk space.

Any ideas on what else could be causing this?

View 4 Replies View Related

Reporting Services :: SSRS Lookup - Can Use More Than One Field When Doing Lookup

Sep 23, 2015

Say I want to lookup a value in another dataset, but there is a grouping that requires you to know what the values for each level is in order to get to the correct detail record.   Can you still use the lookup function with more than one field to compare against? So for example

Department
\___SalesPerson
     \___Measure

I want to be able to add a new row at the Measure level, but lookup each field from another dataset.  In order to do that I will need the Department AND SalesPerson values to do the lookup, but I dont think the Lookup function will let us do that will.

View 2 Replies View Related

Is It Possible To Lookup Value Based On Two Tables Using Lookup Task

Jun 27, 2007

Hi All,

Actually this is in regard to SCD Type 2 Dimension, Scenario is like that I am moving Fact table from some old source and I have dimensionA description value in fact which I want to replace with appropriate id from Dimension Table and that Dimension table is SCD Type 2 based on StartDate and EndDate and Fact Table doesn't contains direct date value rather there is timeId in Fact so to update the value in Fact table I have to Join Time Dimension table and other Dimension Table to replace fact Description with proper Id.



Lets assume DimensionA Structure

id

Description

StartDate

EndDate



Fact Table

id

measure1

measure2

TimeId

Description



Time Dimension

TimeId

Date

Day

Hour ...

View 1 Replies View Related

Row Yielded No Match During Lookup When Using 2 Columns In Lookup

Jul 24, 2007

I am doing a lookup that requires mapping 2 columns in the column mapping section. When I do this, I get the error "Row yielded no match during lookup" . The SQL that I captured in SQL profiler does find the record when I run it in Management Studio. I have already tried trimming everything to no avail.

Why is this happening?



I tried enabling memory restrictions but then I my package hangs and I get a SQLDUMPER_ERRORLOG.log file with the following logged:



07/24/07 13:35:48, ERROR , SQLDUMPER_UNKNOWN_APP.EXE, AdjustTokenPrivileges () failed (00000514)
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 5952
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x0100C5D0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x00000000
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x00000000
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 11 not used
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 15 not used
07/24/07 13:35:49, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used
07/24/07 13:35:49, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: C:Program FilesMicrosoft SQL Server90SharedErrorDumpsSQLDmpr0033.mdmp
07/24/07 13:35:49, ACTION, DtsDebugHost.exe, Watson Invoke: No


Why am I getting this error with "Enable Memory Restriction"?

View 12 Replies View Related

Row Yielded No Match During Lookup While There Is No Row Going Through The Lookup

Sep 29, 2006

Hi all,

I don't understand what's happening here.

I have a Conditional Split with 3 outputs. On the first output I have a lookup, when I execute the package I have 56 rows going through the Conditional Split, all rows are then going to the 2nd and 3rd output but the lookup on the first output generates an error "Row yielded no match during lookup".

I don't understand why the lookup is generating an error while there is no row going through it.

Any idea ?

Sébastien.

View 6 Replies View Related

How To Pick Nearby Text Of Lookup Terms With Help Of Term Extraction/Term Lookup

Oct 4, 2007

I am designing a ssis package,This is intends to mine text data(Data extracted from websites).
Term lookup/Term extraction has been used as tools for mining.
I have lookup terms defined with me for reference table,but the main problem lie in extracting the nearby text/number/charcters to these lookup terms during mining.
For example :
I found noun "Email" 200 (frequency score) times in my text,Now I want to extract nearby email address(this is also true for PhoneNumber,Address attributes also).so how can I achieve this with SSIS.
If u have some idea/suggestion to carry out this challenge with or without Term Extraction/Term Lookup,plz do write here.

View 1 Replies View Related

Times

Feb 12, 2008

I have set up an sql server which has a column called times. This column is to hold race times however when i enter times such as 22:20:89 with the 89 being milliseconds i am not bale to input this it will only allow me to put times in where milliseconds are below 60. This is a problem especially for the shorter races where half a second is a big difference.
 Thanks Mike

View 2 Replies View Related

EM Times Out

Apr 29, 2002

When trying to connect to a server on a slow connection (satelite), Enterprise Manager times out. I am able to connect with Query Analyzer. Tried to change 'remote login timeout', but that did'nt help, EM seems to timeout long before this value is reached. Any ideas ?

Brgds,
Odd Oren

View 1 Replies View Related

Add Times

Jun 11, 2007

SQL Statement.

Adding times together.



I am trying to add a list of times together retrieved from my database.

They are from seperate records in the same table.



They are in a date format e.g. 01-Jan-2006 03:45:00, what I want to do is ignore the 01-Jan-2006 part as well as the :00 AM part and focus on the hours and minutes. I wish to add these up e.g. 03:45 + 04:45 = 08:30. Is there an easy way of doing this?



Below is the SQL statement of getting times from my database if its any help.




SQL StatementSELECT LENGTH_OF_VISIT FROM NOV.MAIN;




Returned Results

30-Apr-2007 02:00:00 AM

30-Apr-2007 01:00:00 AM

01-Jan-2006 02:30:00 PM

01-Jan-2006 03:10:00 PM

30-Apr-2007 01:00:00 AM

View 1 Replies View Related

Selecting Between Two Times

Feb 19, 2007

Dear All,
 I need to select records between two datetimes.
My Database Structure and sample values are as below
Fromdate                                                        ToDate
2007-02-20 09:00:00.000                                 2007-02-20 12:00:00.0002007-02-20 08:00:00.000                                 2007-02-20 12:00:00.0002007-02-20 06:00:00.000                                 2007-02-20 13:00:00.000
Query i used
select * from tablename where ((fromdate between Convert(datetime,'2007-19-2 10:00',103) and Convert(datetime,'2007-19-2 11:00',103)) or (todate between Convert(datetime,'2007-19-2 10:00',103) and Convert(datetime,'2007-19-2 11:00',103))) 
My query is not returning values when i am querying between '2007-19-2 10:00' and '2007-19-2 11:00'
Please help
Thanks
 
 

View 5 Replies View Related

SQL Transaction Times Out

Dec 20, 2007

Hello everyone,
I have an odd issue and I can't seem to figure it out.  I am using SQL Server 2005 and I am using Transactions in combination with Try/Catch blocks.  My query (executing the stored procedure) never seems to finish the query in query analyzer.  I have removed all statements that exectute or select, etc upon the database except for a  simple Select 'test' as test so I would have something in my Begin/End blocks. Below is my stored proc:
ALTER PROCEDURE [dbo].[ar_mainCheckRecon]
@tripID int,
@payment money,
@adjustment money,
@serviceType tinyint,
@checkTpId int,
@checkTlId int,
@checkNbr varchar(20)
AS
BEGINSET NOCOUNT ON;
BEGIN TRY
BEGIN TRAN select 'test' as test
 
 
END TRY
BEGIN CATCH
RAISERROR('Error commiting transaction', 16,1)
 ROLLBACK TRAN
SELECT '0' as success
END CATCH
 
COMMIT TRANSELECT '0' as errorCode
 
END
I call upon the sproc by running this line in query analyzer:
exec ar_mainCheckRecon 433636, 0, 500, 0, 500, 0, 23
Is there something I am overlooking as to why the query keeps running and never stops? My current execution time is at 3 mins accoring to query analyzer!
Thanks,John
 

View 3 Replies View Related

Inserting Just Times

Jan 20, 2008

When using a SQL Server DateTime column to store just times, e.g. '6:00 PM' I've noticed some weird inconsistency.
If I insert a time in a SQL statement, such as... INSERT INTO myTable (StartTime) VALUES ('6:00 PM')
It winds up going in as  '1/1/1900 6:00 PM'.  This is okay.  This is in fact what I want (unless of course the base day for sql server is in fact 12/30/1899, which is my next question).
If, on the other hand, I insert a time value by hand, using SQL Server Management Studio, then after I insert '6:00 PM' it winds up as '<Today's Date> 6:00 PM', i.e. '1/20/2008 6:00 PM'.
Also, if I insert it using a SQL Parameter, such as...
da.InsertCommand.Parameters.Add("@StartTime", SqlDbType.DateTime, 8, "StartTime")
...Then, if StartTime is 6:00 PM again, it also winds up going in as '<Today's Date> 6:00 PM'. 
Is there a way to control this behavior (other than to programmatically append a base date to the time I'm inserting)? 
Finally, what is the base day for SQL Server 2005?  Is it 1/1/1900 or 12/30/1899?  I think I've seen both. 
Thanks!
Aaron

View 3 Replies View Related

Dates Without Times

Jul 27, 1998

Anyone know of an easy way to work with datetime columns ignoring the time part.

I want to "group by" the date so it is vital that the time part goes.

But I still want to work with the resulting date as a date (i.e. use date functions) so I would prefer to keep the datetime data type.

View 1 Replies View Related

Times In Sql Server

Aug 29, 2004

I want to enter times for running event performances (like 10:26.35 for a person's 2-mile time, for instance). I am using sql server 2000. This is an ongoing concern for me since I do a lot of work with running events. Can someone give me some direction as to how I can best deal with this?

The datetime data types do a lot of converting to 'time-of-day' and that is not what I want. For instance, if I enter a 2-mile time of 10:26.35 (a pretty typical 2-mile time) my db converts it to 10:26:35 AM.

If I use varchar data type there is a ton of code to write when I want to sort the data.

Thanks!

View 3 Replies View Related

Various Times From Various Dates

Aug 29, 2006

Jeff writes "I am trying to write a query to retrieve information that was processed between two times of the day (2:00 pm to 6:00 pm) from a date range... I am perplexed; I am new to SQL and am trying not to become frustrated, but this seems to be beyond my skill level. Any guidence would be greatly appreciated!"

View 8 Replies View Related

How Many Times Does A Letter Appear In A Name

Nov 30, 2006

i have a column containing employee name with datatype varchar.
i want to find out that how many times does letter 'y' appear in employee's name.

am a beginner to sql
help appreciated

cheers

View 5 Replies View Related

Subtracting Times?

Mar 1, 2007

I'd like to take two DateTimes, subtract them and insert the result as HH:MM:SS,

I think you use datediff but I'm not clear on the datediff formatting to get back HH:MM:SS...

Thanks for your help!


--PhB

View 5 Replies View Related

Search Between Times

Apr 22, 2006

Hi I'm new to SQl..I have some monthly data which is being encoded as Varchar...Say forthe month of January 2005 it wud look like '200501'. For each of mymonth I have a coloums which gives me datetime and volume of the job.This is what I'm doingSelectMonth,Time ,Sum(Volume)[color=blue]>From Table A[/color]Where (( Month like '200501%' ) and (Time between '2005-01-0102:00:00.000' and '2005-01-31 06:00:00.000))group by month, timeorder by monthPRoblem: What I want is all the volume between 2am and 6am on every dayof the month?The above query naturaly will give me everything between first and lastof the month...Any help is appreciated...Balaji

View 2 Replies View Related

Times In SQL Server

Jun 9, 2006

I am using an MS Access front end to input data into a SQL serverdatabase. From Access I am generating an update query utilising aninline function. My problem is that when I update a time value,instead of updating the field with something like 08:00:00 it updatesit to 1/1/1900 08:00:00. Is there a way to force the update to onlyuse the hours minutes and seconds and ignore the date part?Any help would be greatly appreciated.RegardsTrevor

View 1 Replies View Related

Adding Times Together

Jul 20, 2005

Hi guys,I have a field in my DB called EventDate as a DateTime field,therefore it holds both the date and time together like this:'2004-10-14 08:42:57.000'.I need to add together all the times in this column for a particulardate range (BETWEEN).Any suggestions will be great.ThanksSunny:)

View 10 Replies View Related

Storing Race Times

Nov 20, 2007

Hi,
I am developing an app that manages race results and I need some advice on the best way to store the race times in sql server. As far as I know, the best datatype would be datetime.
With the data stored, I will need to be able to do things such as:


rank the results based on the race time

View 3 Replies View Related

Stored Procedure Times Out

Jun 18, 2008

Hello,
I have been working on this stored procedure, it pulls the results that i want, but it takes a very long time to execute and about half the time it times out, i have tried changing the timeout settings on the sql server to 0 (no timeout) but it seems to have made no difference.
Could anyone help with making the query a bit more effiecient?  SELECT DISTINCT
webStats.id, webStats.ip, webStats.useragent, browsers.browsername, os.osname, webStats.datestamp, webStats.hourstamp, webStats.hostname,
webStats.refurl, webStats.refhost, webStats.entrypage, webStats.visitcount, webStats.country, searchengines.enginename,
IpToCountry.COUNTRY AS CountryName
FROM webStats LEFT OUTER JOIN
IpToCountry ON webStats.country = IpToCountry.CTRY LEFT OUTER JOIN
searchengines ON webStats.useragent LIKE '%' + searchengines.agentstring + '%' LEFT OUTER JOIN
browsers AS browsers ON webStats.useragent LIKE '%' + browsers.agentstring + '%' LEFT OUTER JOIN
os ON webStats.useragent LIKE '%' + os.agentstring + '%'

WHERE (webStats.datestamp BETWEEN DATEADD(d, DATEDIFF(d, 0, GETDATE()), 0) AND GETDATE())
ORDER BY webStats.datestamp DESCThanks for your help.
Bart

View 10 Replies View Related

SqlConnection Times Out In GetPassword

May 3, 2004

I have some code that opens a SqlConnection to a MSSQL 2000 database. The connection opens great everywhere except inside my implementation of IPasswordProvider.GetPassword(). It just hangs there, and then throws a timeout. I have tried using both trusted connections, and userid/password connection strings. I notice that within GetPassword, the authenticated user is COMPUTERNAMEASPNET, whereas in the web method that actually is getting called, the authenticated user is my personal user account. The SqlConnection opens fine in the actual web method.

Can anyone tell me what could stop a SqlConnection from opening while inside GetPassword()? I kinda need to look up passwords in the database.

View 1 Replies View Related

Exec SP Many Times, From Select?

Aug 5, 2004

Hi All...

if i had the following sp...

*******************************************************
create procedure my_insert (param1 int, param2 int, paramx int)
as
...
complicated insert routine
...
return
*******************************************************

and then i wanted to exec this sp in another procedure i would have

exec my_insert( 1_value, 2_value, 3_value )

My question is how could i exec this will the result set of a select.... something like this

exec my_insert (select 1_value, 2_value, 3_value from another_table).

I know i could have this in an insert result type statement ie...

insert into dest_table (select 1_value, 2_value, 3_value from another_table)

but my insert routine is quite complicated and carries out some other functions so I would like to call (exec) a sp rather than repeating the complication in the select statement

Many Thanks
Gary T

View 4 Replies View Related

Scheduled Job Fails 1 Out Of 3 Times

Sep 28, 1999

I scheduled a Bulk copy operation, and have been getting some inconsistent failures.

Last night the job was set to run every 3 hours, I expect it to take about 1 hour to finish.

The second itteration of the job failed, the first and third ran fine.
Here is the error from DTS

Any suggestions? Is there a better/stable Data Provider for SQL?

... DTSRun: Executing... DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: DTSStep_DTSBulkInsertTask_1 DTSRun OnError: DTSStep_DTSBulkInsertTask_1, Error = -2147217900 (80040E14) Error string: The statement has been terminated. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147217900 (80040E14); Provider Error: 3621 (E25) Error string: The statement has been terminated. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error: -2147217900 (80040E14); Provider Error: 7399 (1CE7) Error string: OLE DB provider 'STREAM' reported an error. The provider did not give any information about the error. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error: -2147217900 (80040... Process Exit Code 1. The step failed.

View 2 Replies View Related

SQL Query Load Times

Feb 10, 2006

I have an VB.NET web app which performs a fairly complicated SQL query. It seems in the morning, the 1st time the page is loaded (and query executed) it takes up to 10-15 seconds to complete loading. Sometimes it even times out. However anytime after that, the page loads up (even from another computer) in about 4-5 seconds. Can someone explain the reason for this and how I might fix the load times in the morning?

Thanks

View 1 Replies View Related

How To Select One Record Many Times?

Sep 14, 2006

The developers of frond end ask to select only one row from one table, but many times, such as 10. That means the output has 10 rows and same.

Any suggestion will be appreciated.

ZYT

View 4 Replies View Related

Function Running Many Times

May 28, 2008

Hello,

I see the following problem regarding a SQL function that returns a value.

We have the following query

SELECT c.Id_Customer, c.Name
FROM t_Customers c
WHERE c.Id_Status = fn_GetParameter('ID_Status.Active')

The idea is not hardcoding the status and other values on each query, and, since SQL Server does not support the definition of constants, we have a table with many parameters and we search them.

We defined the function "WITH SCHEMABINDING" and the SQL Server recognizes it as DETERMINISTIC, so I do not understand why it executes the function as many times as records in the t_Customers table, since every time it is executed it returns the same value.

We could define a variable, assign the value returned by this function to this variable and then use it on the SELECT, but this approach is useless if we use SQL instead of stored procedures (for example, in reports from reporting / BI tools).

Any explanation about why SQL chooses to execute the function many times, and any hint regarding how to make SQL Server execute only once the function will be very appreciated.

Thanks in advance,

Lisandro.

View 3 Replies View Related

Compare Two Times In SQL Express

Jul 19, 2006

Hey, everyone. I'm new to database programming in SQL Server, and I currently have the 2005 express edition. I was wondering whether it was possible to check whether one time (h:mm AMPM) is less or greater than another (the other in this case being the GETDATE). I already made a user-defined function in order to extract the time from a datetime, since SQL Server doesn't support the time data type. The thing is that the value is returned as a char(8) in the 12-hour style HH:MM AMPM format and I'm sure that's what's screwing up the comparison function. What would I need to do to compare two times (24-hour or 12-hour, whichever is easier)?

View 7 Replies View Related

Don't Want To Insert Same Values 2 Times.

Sep 6, 2006

create proc dbo.usp_CatchAddressException @tableName varchar(500) as
-- alter proc dbo.usp_CatchAddressException @tableName varchar(500) as


begin
set nocount on
declare @sql varchar(700)

-- truncate table tempException
set @sql = 'insert hava_dcde.dbo.STREET_EXCEPTION (id_town, id_voter, pre_value, nbr_exception, date_stamp)
select a.id_town, a.id_voter, substring(a.ad_str1, 1, len(a.ad_str1) - charindex('' '', reverse(a.ad_str1))), ''20'', getdate()
from HAVA_DCDE.dbo.' + quoteName(@tableName)+ ' a
where substring(a.ad_str1, 1, len(a.ad_str1) - charindex('' '', reverse(a.ad_str1))+1) not in
(select nm_street from HAVA_DCDE.dbo.state_streets ss)'
-- and a.id_town = + @tableName
-- print(@sql)

exec(@sql)
set nocount off
end
---------------------------------------------------


when i run this SP 2 times, it will insert the values 2 times.
what should i do if i don't want to insert the same values 2 times?
I'm confussed, Should i use update? any input will be appreciated.

View 20 Replies View Related

Query - Between To Dates And Between To Times

Jul 24, 2001

Hi there, I'm a little bit stumped on this one.

I have a column in a table that records when the date and time of an event took place.

Table Name: Chronicle
Column Name: Created (of type DateTime)

I would like to select the Chronicle records that are between two dates.
(e.g. 1 May 2001 and 20 May 2001)
And I would like to select those records that are between two times.
(e.g. 6:00am and 1:00pm)

Does anyone know how to do this or have any pointers for me?
I can see it would be easier if I had the date in one column and the time in the other.
Can it be done without doing that?

cheers,
Hamish

Hamish Norton
hamish@liftrider.com

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved