Need Faster Data Transfer :: Oledb
Nov 22, 2006
i need to fetch data into multiple tables from a remote server (ss 2005)...so inside a sequence container , i have placed various data flow task...each task in turn gets data from oledb source to oledb destination.....there is minimal transformation involved...but the data is huge...and its taking unexpectably long...(im gettin only fresh data..identified by datetime fields of source tables..thats the only check.),
and way to make it faster...source db in not in my control...so i cant get indexes on it..:(
View 9 Replies
ADVERTISEMENT
Sep 14, 2007
Hi,
After I had transfered SSIS package to another PC I tried to open package and I got an error. ".. Failed to decrypt protected XML node "PackagePassword" with error . ".
It turned out, that the password wasn't saved in a OLEDB connection manager of the Package. However "save password" options checked!
But password field was empty.
As soos as I enter password the package executes successfully.
Question: How can I transfer a password for OLEDB Connection within a SSIS package to another developer's VS2005?
View 4 Replies
View Related
May 30, 2008
Is it possible/advisable when transfering very large amounts of data from server to server to:
trasnfer the data to a new table first
second alter new table adding indexes, defaults, ets based on original table
if it is what flow item would be used to transfer/alter the indexes and defaults?
I'm very new to ssis so the more detail you can give the better.
Thanks
View 5 Replies
View Related
Dec 13, 1999
Hello,
I was wondering if there was a different approach I should take in appending data to a table...
My destination table has about 94+ million records in it, and I have been taking two approaches to getting new files into this table:
1) I do a data pump task in a DTS to import the file to a trans (temp) table, which is truncated every time, and then do an INSERT INTO statement from the temp table to my destination table.
The import to the trans table only takes a few minutes (about 1 - 2 million records per file, but have short record lenghts,) but when I do the INSERT INTO statement, it takes upwards of 6 hrs to append.
2) I have tried doing a bulk insert task, going directly to the destination table (which defeats the purpose of my trans table to check out the data prior, but I feel the data is clean at this point.)
I am running the bulk insert right now, and it's been running for over 3 hours...so I'm going to assume this will take just as long as the INSERT INTO statement does like I did before.
My destination table does not have any indexes in it at all, and I don't need to do any transformations to the data when bringing it into SQL since the data is clean. Also, I have a default value constraint on one of my fields on the destination table.
Plus there are other ppl and applications hitting the server which could impact the overall processing, but nothing out of the ordinary is going on the server today. I know there are only so many ways to get a file into a table...but maybe someone knows a different way I should try this.
Thanks for anyone's suggestions!
Kael.
View 1 Replies
View Related
Mar 19, 2014
In the full recovery model, if i run a transaction that inserts 10MB of data into a table, then 10 MB of data is moved in the data file. Does this mean then that the log file will grow by exactly 10MB as well?
I understand that all transactions are logged to the log file to enable rollback and point in time recovery, but what is actually physically stored in the log file for this transactions record? Is it the text of the command from the transaction or the actual physical data from that transaction?
I ask because say if I have two drives, one with 5MB/s write speed for the log file and one with 10MB/s write speed for the data file, if I start trying to insert 10 MB of data per second into the table, am I going to be limited to 5MB/s by the log file drive, or is SQL server not going to try and log all 10 MB each second to the log file?
View 6 Replies
View Related
Oct 25, 2007
Hello,
i want to import data from an excel sheet into a database. While reading from the excel sheet OleDb automatically guesses the Datatype of each column. My Problem is the first A Column which contains ~240 Lines. 210 Lines are Numbers, the latter 30 do contain strings. When i use this code:
Code BlockDim sConn As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & conf_path_current & file_to_import & ";Extended Properties=""Excel 8.0;HDR=NO"""
Dim oConn As New OleDb.OleDbConnection(sConn)
Dim cmd1 As New System.Data.OleDb.OleDbCommand("Select * From [Table$]", oConn)
Dim rdr As OleDb.OleDbDataReader = cmd1.ExecuteReader
Do While rdr.Read()
Console.WriteLine(rdr.Item(0)) 'or rdr(0).ToString
Next
it will continue to read the stuff till the String-Lines are coming.
when using Item(0), it just crashes for trying to convert a DBNull to a String, when using rdr(0).ToString() it just gives me no value.
So my question is how to tell OleDB that i want that column to be completly read as String/Varchar?
Thanks for Reading
- Pierre from Berlin
[seems i got redirected into the wrong forum, please move into the correct one]
View 1 Replies
View Related
Apr 16, 2014
I have an source file and i have to load it into the data base by changing datatype of the columns in ssis
View 1 Replies
View Related
Jun 11, 2007
My vendor requires data to be sent in Excel format. Some of my tables have rows over 65,536 so I need to use Excel 2007 (Max of 1,048,576). Right now my data sits in SQL 2000. I am using MS SQL Enterprise Manager 8.0 to prepare the data. Is there some kind of add on or selection I am missing to use DTS to export from SQL to Excel 2007?Thanks in advance.
View 3 Replies
View Related
Jun 9, 2013
I have two database(MYDB1 , MYDB2) on two different server's(SERVER1 , SERVER2) . I want to create an store procedure in MYDB1 on SERVER1 and get some data from a table of MYDB2 on SERVER2. How can i do this?
View 5 Replies
View Related
Oct 10, 2006
Hi all,
I got an error when i do an OLE db Source pointing to an sql 2000 database and executing a sql query inside the OLE Source. The ole source will point to an OLE DB destination which is an sql 2005 database.
But i got the below error:
Error at Data Flow Task [OLE DB Destination [245]]: the column firstname cannot be processed because more than one code page (936 and 1252) are specified for it.
Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB destination" (245)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow TaSK: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
View 5 Replies
View Related
Nov 15, 2006
I have an excel sheet that contain colummns as in a table in a sql database i want to transfer this data from the sheet to the table frombusiness logic code layer not from the enterprise manager by wizardwhat can i do?? ...please urgent
View 1 Replies
View Related
Aug 29, 2006
I have created a SSIS package that transfer data from a Foxpro database to an instance of SQL Server 2005 Express. I used the wizard to create the package but I load and execute the package within a custom application that I have written in C#.
The way the custom application is intended to work is that the user can have the database in any location on the computer and all he has to do is specify the location then the application programatically changes the location of the source on the package that it has loaded and then execute it. When I initially run the package the first time (using the original path), it works fine and transfers the data. However, every subsequent time I run the application and specify a different path, the database on the SQL Server side gets created as expected but the data is not transfered!
Where am I going wrong? Do I need to save the package after I modify the source then reload and run it again or do i need to change something else in the Data Flow to make this work?
View 4 Replies
View Related
Nov 26, 2015
I am newbie to MDS of SQL,want to know how we can transfer tables from two different SQL Databases to MDS.Suggest me the steps to proceed with any examples.
View 2 Replies
View Related
May 23, 2008
Hi, I got the error
A first chance exception of type 'System.Data.OleDb.OleDbException' occurred in System.Data.dll
The thread 0x3a24 has exited with code 0 (0x0).
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.OleDb.OleDbException: Unrecognized database format 'C:inetpubwwwrootExcelData.xlsx'.The file exists at that location . i tried this solution. I tried to change permissions but it was not saving it.
To resolve this problem, enable read/write permissions for the impersonated user account in the Temp folder. To do this, follow these steps:
1.
In Windows Explorer, locate the following folder:
Document settingsServerNameASPNETLocal settingsTemp
View 13 Replies
View Related
Apr 20, 2006
A little background first. I have a header table and a detail table in my staging area/ods. I need to join them together to flatten them out for load. The Detail Table is pretty deep - approx 100 million rows.
If I use the setting (table or view) and set the table name (say, the detail table), the package starts up nicely. But if I switch the OLE DB Source to using a SQL Statement and then join the tables in the SQL, then the Pre-Execute phase of the package takes a VERY long time. I have waited as long as 30 minutes for this phase to complete, but it never finished.
Another twist...If I take the join select statement out of the OLEDB Source and put it in a view on the server, then swith the OLE DB Source to look at the view using the (table or view) mode, then the package gets through the Pre-Execute phase just fine.
Can someone go into detail as to what the Pre-Execute phase does and why a deep table might make it take a long time? I know already that the pre-execute phase caches the lookups, but not much else.
Any help?
Mark
http://spaces.msn.com/mgarnerbi
View 3 Replies
View Related
Dec 28, 2006
HI,
Inside SSIS's Dataflow task, i'm getting data using ODBC connection(in DataReader Source) for an iSeries library and trying to insert that into DB2 database (using OLEDB destination ). Mappings etc work absolutely fine,but on execution get error as given below:
How do i resolve this error and load data in DB2 , Need help at the earliest.
Thanks in Advance
Amit S
Here is the ERROR Message:
SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Data Reader to DB2, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Reader to DB2, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Reader to DB2, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Data Reader to DB2, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at Data Reader to DB2, OLE DB Destination [12]: An OLE DB error has occurred. Error code: 0x80040E53.
Error: 0xC0047022 at Data Reader to DB2, DTS.Pipeline: The ProcessInput method on component "OLE DB Destination" (12) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at Data Reader to DB2, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0202009.
Information: 0x40043008 at Data Reader to DB2, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Data Reader to DB2, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Reader to DB2, DTS.Pipeline: "component "OLE DB Destination" (12)" wrote 0 rows.
Task failed: Data Reader to DB2
SSIS package "Package.dtsx" finished: Success.
View 17 Replies
View Related
May 8, 2007
Hi,
I have a SSIS project where I am transferring data from DB2 table to SQL Server table. There is a column called REC_ID which I need to encrypt before we store it in SQL Server. Now, SQL Server has buildin encryption functionality and we need to use that as there are views that will decrypt this column and give data to authenticated users.
So, the question is, is there anyway that I can encrypt the column data in my SSIS package using my target SQL server database key and using SQL server encryptbykey function while transferring?
Thanks,
Ujjaval
View 1 Replies
View Related
Feb 1, 2007
Hi,
Can I transfer data between two dataflow.
Is it possible through anyway?
Thanks
Dharmbir
View 4 Replies
View Related
Feb 2, 2008
Slow OLEDB Source in Data Flow
Hi All,
I have a simple data flow task, composed of only an OLEDB Source, a Conditional Split, and two Execute SQL statements (both insert statements, one after the other). When I run my package in Visual Studio for debugging, I noticed that after executing around ~9800 in the first and another ~9800 records in the second insert statements, the OLEDB Source will take around 3 or 4 minutes to fetch another set of ~9800 records. I have set the DefaultBufferMaxRows property of the Data Flow to 10000. My query to retrieve those 700,000 records runs for about 2-3 mins to finish (which I think should be decent enough). Is this an expected behavior of SSIS? The expected number of records to be retrieved is 700,000, and it takes forever to finish the transfer of these records. Please help
View 4 Replies
View Related
Mar 11, 2008
I'm importing from a SQL table that has data fields typed as numeric(18,2) and the OLEDB data source component converts the data to integers (as viewed in the data viewer). I've preceeded the column names with (DT_NUMERIC,18,2) with no results. When the data gets saved to a table with the field typed as money, it appends .00. The truncation of pennies (decimal) results in the diminution of the daily results as much as $1,000. How do I pass the pennies through the OLEDB data source component? Is this truncation by default,or is there something I'm missing in the configuration? thanks.
Dan
View 4 Replies
View Related
Feb 17, 2006
Hello,
I am getting an error while trying to import data into SQL 2005 from an existing Access MDB database. When I try this on another workstation there are no problems and the data is imported successfully.
Could someone tell me what to look for or what setting I have incorrect. On the workstation with the problem I had removed SQL 2000 Personal Edition and installed SQL 2005 Standard Edition. Also, I have both Visual 2003 and 2005 installed on this workstation as well.
Thanks
TITLE: SQL Server Import and Export Wizard
------------------------------
Could not set up data flow connections.
The connection type "OLEDB" specified for connection manager "{DAE0A984-862B-4E4A-890E-8DB4860C9F6B}" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
------------------------------
ADDITIONAL INFORMATION:
The connection type "OLEDB" specified for connection manager "{DAE0A984-862B-4E4A-890E-8DB4860C9F6B}" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
({55FFB2C2-E461-4FDB-B3C4-EE4677B80C77})
------------------------------
BUTTONS:
OK
------------------------------
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Error)
Messages
The connection "SourceConnectionOLEDB" is not found. This error is thrown by Connections collection when the specific connection element is not found.
({3DDD68E3-30A4-4513-B0AB-45F340BAB4C0})
- Setting Destination Connection (Stopped)
- Validating (Stopped)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Stopped)
- Copying to [EJTest].[dbo].[Journal] (Stopped)
- Post-execute (Stopped)
- Cleanup (Stopped)
View 16 Replies
View Related
Nov 17, 2006
I try to use sqlDataSource to gather the input for GrideView. The SELECT statement can run on SQL SEVER 2005, but can't get response when it is running on Visual Web Developer 2005 Express. The error message is : Server Error in '/WebSite1' Application.
I think it was due to "GROUP BY" . Could anyone please tell me how to fix it?? Thanks!!
Stack Trace:
[OleDbException (0x80040e31): timeout expired ] System.Data.OleDb.OleDbDataReader.ProcessResults(OleDbHResult hr) +81 System.Data.OleDb.OleDbDataReader.NextResult() +427 System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method) +351 System.Data.OleDb.OleDbCommand.ExecuteReader(CommandBehavior behavior) +122 System.Data.OleDb.OleDbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) +29 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +183 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +307 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +152 System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +2868 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +84 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +154 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +99 System.Web.UI.WebControls.GridView.DataBind() +24 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +92 System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +100 System.Web.UI.Control.EnsureChildControls() +134 System.Web.UI.Control.PreRenderRecursiveInternal() +109 System.Web.UI.Control.PreRenderRecursiveInternal() +233 System.Web.UI.Control.PreRenderRecursiveInternal() +233 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4435
View 5 Replies
View Related
Jan 23, 2007
Can someone help me with this error, so the page can show the rocords, its works on my PC but not at my host.
I get this error:
Exception Details: System.Data.OleDb.OleDbException: No value given for one or more required parameters.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[OleDbException (0x80040e10): No value given for one or more required parameters.]
System.Data.OleDb.OleDbCommand.ExecuteCommandTextForSingleResult(tagDBPARAMS dbParams, Object& executeResult) +267
System.Data.OleDb.OleDbCommand.ExecuteCommandText(Object& executeResult) +192
System.Data.OleDb.OleDbCommand.ExecuteCommand(CommandBehavior behavior, Object& executeResult) +48
System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method) +106
System.Data.OleDb.OleDbCommand.ExecuteReader(CommandBehavior behavior) +111
System.Data.OleDb.OleDbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) +4
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +141
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
My code is:
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="CMS_Default.aspx.vb" Inherits="cmssystem_CMS_Default" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="CM_form" runat="server">
<div>
<asp:GridView ID="GridView1" runat="server" DataSourceID="CMSqlDataSource">
</asp:GridView>
<asp:SqlDataSource ID="CMSqlDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:CMConnectionString %>"
ProviderName="<%$ ConnectionStrings:CMConnectionString.ProviderName %>" SelectCommand="SELECT [SiteMainID], [SiteMainIdentity], [SiteMainText] FROM [MainSiteText] ORDER BY [SiteMainID]">
</asp:SqlDataSource>
</div>
</form>
</body>
</html>
View 7 Replies
View Related
Feb 27, 2007
Hello
I got a problem with datatransfer via Microsoft.JET.OLEDB.4.0.
As long as I use the following statement it's working but only 255 Characters will be transferred to Excel.
INSERT INTO OPENROWSET('Microsoft.JET.OLEDB.4.0','Excel 8.0;HDR=YES;Database=C:xxxxxx.XLS','SELECT F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12 FROM [Tabelle1$]')SELECT TOP 65000 [Störungsnummer], CONVERT(varchar(50),[Annahmedatum],120) AS [Annahmedatum], CAST([Teilnehmernummer A] AS VARCHAR(255)) AS [Teilnehmernummer A], CAST([Annahmeperson] AS VARCHAR(255)) AS [Annahmeperson], [Annahmeplatz], CAST([Störungscode] AS VARCHAR(255)) AS [Störungscode], [Störungscode Nummer], CAST([Störungsmeldungstext] AS VARCHAR(255)) AS [Störungsmeldungstext], CAST([Wartungsvertrag] AS VARCHAR(255)) AS [Wartungsvertrag], CAST([SOSegment] AS VARCHAR(255)) AS [SOSegment], CAST([Kundensegment] AS VARCHAR(255)) AS [Kundensegment], CAST([TDV] AS VARCHAR(255)) AS [TDV] FROM [yyyyyyyyyyyy].
As soon as I try to extend the varchar over the limit of 255 the following error occurs:
String or binary data would be truncated. Export ERROR: XLS - Export in work.. (Microsoft.JET.OLEDB) The statement has been terminated.
Question: Is it possible to transfer more than 255 Characters into an Excel-Cell? If yes, whats wrong with the statement above?
Thank you very much for an early answer
regards
Chaepp
View 2 Replies
View Related
Apr 24, 2008
Hi All,
In one of my interfaces,i am trying to Stage data in a ##table from a Flat file,so that i can iterate through the data in for each loop afterwards.
I have written a stored Proc to do this.But what i am observing is in the ##Table only the last Row will be persisted.
The SP looks like this
Code Snippet
CREATE PROCEDURE USP_SVInsS093Data_V001
@DetailRECTYPE nvarchar(5),
@StoreNumber int,
@Product nvarchar(20),
@Planogramref nvarchar(20),
@DisplayGroup nvarchar(5),
@ModSequence int,
@Shelfnumber int,
@Productposition int,
@StartModnumber nvarchar(20)
AS
SET NOCOUNT ON
BEGIN
if object_id('tempdb..##S093_TempTable') is not null
drop table ##S093_TempTable
CREATE TABLE ##S093_TempTable(
[DetailRECTYPE] [nvarchar](5) NULL,
[StoreNumber] [int] NULL,
[Product] [nvarchar](20) NULL,
[Planogramref] [nvarchar](20) NULL,
[DisplayGroup] [nvarchar](5) NULL,
[ModSequence] [int] NULL,
[Shelfnumber] [int] NULL,
[Productposition] [int] NULL,
[StartModnumber] [nvarchar](20) NULL
)
INSERT INTO ##S093_TempTable
([DetailRECTYPE]
,[StoreNumber]
,[Product]
,[Planogramref]
,[DisplayGroup]
,[ModSequence]
,[Shelfnumber]
,[Productposition]
,[StartModnumber])
VALUES
( @DetailRECTYPE ,
@StoreNumber ,
@Product ,
@Planogramref ,
@DisplayGroup ,
@ModSequence,
@Shelfnumber ,
@Productposition ,
@StartModnumber
)
If i have a select query after the Data Flow task only the last row is returned.
Now how to make the ##Table keep all the rows.
Any help will appreciated.
Thanks in Advance...
Cheers
Srikanth Katte
View 8 Replies
View Related
Nov 9, 2006
Hi
Inside a data flow task, i have a oledb source and destination. In my situation, I need to pull data from a table in the source, but also hard code some columns myself, which means my source is a blend of data from table, hard coded data, which will then have to be mapped to columns in oledb destination. Does anyone which option to choose in the oledb source dropdown for the data access mode. Keep in mind, i do need to run a a select query, as well as get data from a table. Is it possible to use multiple oledb sources and connect to one destination, because that is really what intend to do here. I am not sure how it will work, or even if its possible. Basically my source access mode needs to be a blend of sql command and table columns, how would that be implemented? Any help or advice is appreciated.
MA
View 4 Replies
View Related
Jan 1, 2007
hello
i am performing the ETL on the as400 db2 database using ms- dts,ssis.
i have built the connection b/w as400 and source to extract data from as400 to staging means in dataflow . when i have built the oledb connction for loading data to destination as oledb destination.then it will connct successfully to the db2 as destination but when execute the task then it not load data , and give provider error.
what can be good solution for this.
can u solve it.
rep plz.
View 2 Replies
View Related
Sep 11, 2007
I am trying to execute a SP like below in OLEDB source in data flow... and this statement include the insert stament ( row by row transaction).. I would like to creat an error hadling logic so that if the trasaction fail to insert the row then ignore that particular row then, move to the next row without stopping the whole process.. how can i do this?
exec usp_Inert_Registration_Episodes_Assessments
@Unique_ID=?,
@Gender_Cd=?,
@Birth_Date=?,
@Race_Ind=?,
@Ethnicity_Cd=?,
@Registration_Dt=? ,
--
--@Object_Key
View 16 Replies
View Related
Feb 15, 2008
During the execution of SSIS Package which is populating huge data into OLEDB Destination from OLEDB Source, then some of the records are getting rejected. Again if we are executing it twice or thrice, the rejected records are getting inserted.
Wants to know, why the records are getting rejected? Target table does not contain any constraints.
Hope to hear soon!!!!!!!!!!!!!!!!!!
View 5 Replies
View Related
Jun 8, 2006
Hi All,
Another requirement has cropped up with regard to picking up connection settings for data sources from an external File.
My source and target are both in SQL Server. What i need is that if my source or target changes I should just change my external file and same should reflect in my package.
How can I accomplish it? Please suggest some solution.
Thanks in advance.
Regards,
Aman Anand
View 2 Replies
View Related
Feb 26, 2008
Hi All,
In one of my SSIS Interface I have to Merge data from a Oledb source and a Flat file source.But after I read from the flat file I have do a basic validation of the file for the length of header,detail and trailer records and then process further.The above Validation I am doing within Script Component.If the validation fails the flow should pass out of the DataFlowTask without Initailsing the Oledb source.
But the problem is i am not able to connect anything to the Oledb source,i.e Oledb source is not taking any incoming Pointers.
Earlier I had done the same Validation in Control Flow Task,but then the interface was reading the same file twice,once in the Control Flow Task and then again in the DataFlowTask.Which i should avoid now.
I hope many of you could have come across such a problem.
Any help on this will be appreciated.
cheers
Srikanth Katte
View 5 Replies
View Related
Aug 22, 2005
Hi everyone,I need some help transfering my database(SQL2005) to the host's server.In SQL 2000 I had the Management tools > DTS or ImportExport tools.SQL2005 lacks this, all I've got is Express Manager > can't connect to multiple databases.Can connect to one database and has a screen to excute TSQL commands.I don't want to have to recreate the whole database on the server.....This would be crazy... 150 stored procedures and 30 tables. Not to mention all the individual settings for each column.I know there is SQL Studio Management tools for the full version of SQL 2005. Anyone got any idea's ?Any input/suggestions is greatly appreciated.Thanks,JShep
View 1 Replies
View Related
Aug 3, 2000
can any body can tell how data trnsfer from oracle database to sql server database. what is the methods i can use? is it required to write scripts.
if scripts required, can anybody can give me sample scipt.
View 1 Replies
View Related
