hey guys heres my problem iam trying to install SQL server2000 but i keep on running into problems....??
here is what iam having problems with
setup SAPWD="AStrongSAPwd" SECURITYMODE=SQL
it keeps saying the instance name specified is invalid there has to be an easyer way to run the program...??
i have all ready set up an instance name and the SAPWD.
any suggestions?? please help
Hi,
I've been trying to follow Microsoft's instructions on installing MSDE2000 for Visual Studio. I do instancename=VSDOTNET SECURITY=SQL SAPWD=XXXX and all that. When I reboot, I notice that I have no services in the SQL Service Manager, nor can it find my computername.
Anybody know why this is?
Hi,
I have a problem with the database that I created using MSDE 2000 SP4. I tried to attached the database into the new SQL Express using the sp_attach_db and it worked. The message mentioned is that the DB has been upgraded. When I tried to attach back the DB back to my MSDE, it can't be done.
My PC is XP pro SP2. Before I reattach the DB back to MSDE, I detach the DB from my SQL express.
Is it because once the SQL express upgraded the DB, it cannot be supported by MSDE or SQL 2000 ?
Thanks. Any help is greatly appreciated.
Hi
Im installing MSDE2000 on new Machine Pentium IV LGA Processor HT technology; OS Windows 2000 Professional. Its getting roll Back after some installation.
The same setup if im installing on my other new Machine With Scoket 478 Processor OS Windows2000 Professional. Its installing completly.
Is there any compatibilty problem.
Please Advice me what to do. Thanks In advance
Ii have installed msde 2000 now all my Access files are in 2000 format how do i change back to 2003?
View 1 Replies View Relatedlooks like a noob question but how can i manage msde2000...i can see sql is runnin but how can i create database , attach/detach database, write functions and so on...
thanx alot for the reply :)
Hi there,
I'm having some trouble with my MSDE2000 (version 8.00.194) and I'd appreciate any insight you could provide...
Long story short, I'm not sure what went wrong, but after stopping my SQL server to change DBs, it wouldn't start again. On the server, it showed no errors. In my services list, it said something along the lines of 'This service has no actions to perform, and so will not start'. It was a few days back, so I forget the exact message...
After restarting my PC, the service started without any errors, but my ODBC Connections will not find my SQL server. I get the following messages with the following scenarios:
Server: (local) : SQL server does not exist or access denied.
Server: . : Specified SQL server not found.
Server: 127.0.0.1 : Login failed for user <username>.
Server: <PC name> : Login failed for user <username>.
I have come across a similar issue before, where re-installing the MSDE sorted it out, this time however, I cannot uninstall the desktop engine: simply shows 'An error has occured during the installation' and nothing else after that. I also cannot apply any service packs, I get the same message as above. I have also tried upgrading to MSDE2005 (using company CDs on my PC at work), to be told that the installation has been blocked due to the following software: 'MSDE2000 8.00.194'.
For the record, I have also installed SP3 for Win XP... Not sure if that might be the issue? I somehow doubt it though. I tried a system restore to the day before the problem started, and it is still doing the same after a successful restore.
Help?!? Please? I need an SQL server for my work software to function correctly, I work in a busy call centre and I cannot get this fixed myself. I'm on the brink of formatting with a fresh install if XP.
Regards,
Andre.
I have side by side msde2000 and sqlexpress installed. I need to move a db that has been detached from msde2000 and where it works perfectly fine into sql express. After I select the .mdf file to attach I get this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'LTBAHIASQLEXPRESS'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
SQL Server detected a logical consistency-based I/O error: torn page (expected signature: 0x55555555; actual signature: 0x55555551). It occurred during a read of page (1:97) in database ID 6 at offset 0x000000000c2000 in file 'C:Memo2005DiaryMEMOinMEMOsql.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Converting database 'MEMOsql' from version 539 to the current version 611.
Database 'MEMOsql' running the upgrade step from version 539 to version 551. (Microsoft SQL Server, Error: 824)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=824&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Thanks for any help,
Luis
I just downloaded and installed MSDE2000 sp3a for winform and asp.net
quickstart tutorial. But I found it has no sample database such as pubs
and northwind. It used to have these databases. At least in last September
when .Net web Matrix came out.
If this is the case, can someone tell me where to get the sql scripts
to create Northwind database in MSDE?
Becasue the winform tutorial uses this database.
Thanks in advance!
Lei Xu
hi there,
i have following system:
the MSDN is running on a win98 machine,
the client-applications, which uses the DB are running on winXP.
there are (SOMETIME!) connection problems to the DB, i guess because of
connection timeouts.
unfortunately i can not change the system, i only can change some setting
or install additionally components such as MDAC.
what can i do,
please help me, it is a support case for a customer.
thank you very much.
mik
Hello !
I have installed msde2000A , but wanted to use Adventure Works database for which I am trying to install sql server express edition 2005 ,
But I want to install it w/o removing earlier msde2000A .
Is it possible.. I was guessing I could install 2 instances .
1st of mase200A and 2nd that of sql express edition 2005.
If it is poss , how to do that ? any other particular procedure / or normal install procedure .
Any one can help ?
Thanks
Bobo
I attempted to install MSDE on a WinXP machine(server) today. I installedfrom the command prompt as follows:-[color=blue]>setup INSTANCENAME="NetSDK" SECURITYMODE=SQL BLANKSAPWD=1[/color]Before I get 'blasted', I know that I 'really shouldn't' use a blank sa pswdbut.......I did :-)I then detached (sp_detachdb) an existing db from another machine. Moved itonto the new instance and reattached it.Finally, I executed the following scripts:-sp_addlogin @loginame = 'name', @passwd = 'password', @defdb = 'dbName'sp_grantdbaccess 'name'sp_addrolemember 'db_owner', 'name'So, this was fine and I could connect to the new db using either windowsintegrated security or 'name'/'password' BUT..BIG BUT, only at the server.When I tried to connect from a client I received an error message, 'SQLServer Does Not Exist or Access Denied'.I am assuming that all is well with the db and that it is something I havedone...or more probably not done with the sql server instance (as the errorsuggests:-). Can anyone please suggest my error?Thanks
View 3 Replies View RelatedHi,
i have a problem when i try to do an inplace update of msde2000 to SQLServer2005Express (adv.).
The following error message is displayed:
SQL Server Setup failed to execute a command for server configuration. The error was [Microsoft]
[SQL Native Client][SQL Server]Incorrect syntax near '='..Refer to the server error logs and Setup logs for detailed error information
Has anyone a suggestion to solve the problem ?
thank you in forward.
BR
Jürgen
Hi,
Recently when i try to upgrade my current MSDE 2000 (SP3a) to SP4, the system just keep on failing me. Here is the scenario:
1. Download the MSDE2000 SP4 from microsoft
2. Extract the SP4
3. Run the following command in either the command prompt or via a batch file:
echo off
echo "Start to Upgrade MSDE SP4 ... "
setup.exe /UPGRADESP SQLRUN INSTANCENAME=JSNG SECURITYMODE=SQL UPGRADEUSER=sa UPGRADEPWD=Th3B3st /L*v c:MSDE_Log.log
echo "SP4 Upgrade Process completed!"
4. Once the above batch file was runned, the standard SQL configuration screen (gathering information) will be triggered.
5. However after a while the installation will just stopped.
6. When i checked on the log, i have found out that the failure of installation is due to the system has failed to configure the server. PFB for the last few rows of the verbose log:
=== Logging stopped: 8/22/2006 17:36:49 ===
MSI (c) (90:88) [17:36:49:865]: Note: 1: 1729
MSI (c) (90:88) [17:36:49:865]: Product: Microsoft SQL Server Desktop Engine -- Configuration failed.
MSI (c) (90:88) [17:36:49:865]: Grabbed execution mutex.
MSI (c) (90:88) [17:36:49:865]: Cleaning up uninstalled install packages, if any exist
MSI (c) (90:88) [17:36:49:865]: MainEngineThread is returning 1603
=== Verbose logging stopped: 8/22/2006 17:36:49 ===
7. When i check the MSI Installer Event ID at Microsoft site, it just said that this is the server configuration problem and i cant find any solution.
Any forumers here experience the above before? Mind to share some thoughts?
FYI, my current MSDE configuration is as follow:
- MSDE 2000 Release A (SP3a - 8.00.760)
- Installed Instance = JSNG
Thanks.
regards,
JS
Has any one had experience with upgrading MSDE2000 with no instance to SQL2005 Express?
Thanks
ZS
Hi
I am using MS Access project as a frontend and MSDE 2000 as a backend database. I have few users and i want to give every one restricted access to database based on their use.
How can i create user accounts. I checked tools-->Security--> but workgroup admin option is not active. How to solve this puzzle
Thanks in advance
Neha
Can't connect from Win XPpro to named instance nor default instance on server running MSDE2000 SP3 via LAN (WORKGROUP). Works fine from Win 2K in the same network. Attached screen shot of error message. Osql gives the same response.
View 2 Replies View RelatedI am aware that instances of both can exist on the same machine.
But I assume that is when a different instance of SQL Server Express is installed with an existing instance of MSDE2000
Many moons ago, when the various flavours and betas of SQL Express became available, I upgraded from MSDE2000 - didn't think I would need it again.
I now have an application, Sony Vegas 6, which uses MSDE2000 for it's Media Manager. According to their support it won't install to SQL Server Express 2005.
When I try to install MSDE2000, it always fails with "Setup failerd to configure server..." and rolls back.
In the event log, there is an entry
The description for Event ID ( 19011 ) in Source ( MSSQL$SONY_MEDIAMGR )
cannot be found. The local computer may not have the necessary registry
information or message DLL files to display messages from a remote
computer. You may be able to use the /AUXSOURCE= flag to retrieve this
description; see Help and Support for details. The following
information is part of the event: (SpnRegister) : Error 1355.
I have down all the usual things like uninstalling SQL Server Express 2005 (using control panel and msiexec /x {GUID}), patching the registry etc etc
The result is always the same.
The Sony Media Manager is not important and I probably won't use it but it's annoying the hell out of me - I've always claimed, over a good few years, that there was no computer problem that I couldn't finally solve, but presently this has got me beat and I feel undone!!!!!!! :-)
regards
Stuart
www.mckears.com
I'm trying to install the MSDE2000 on window xp, sp2. During the installing, apperance the percent bar is rolling back, which is not even completed install. I had read the issue from microsoft to restart the server service, and...but no luck. Is there anyone has an ideas.
View 1 Replies View RelatedMy Problems & Situation:Hi! I am a ASP.NET starter. My platform is WinXP Home Edition and I haven't installed any version of SQL server before.I download different version of MSDE and extracted in my C drive separately, including: 1. Microsoft SQL Server 2000 Desktop Engine (MSDE 2000) Release A 2. Microsoft SQL Server 2000 Service Pack 3a (contained MSDE 2000) 3. MSDE 2000 for Developers Using Visual Studio .NETsince all of the above versions have the same problem when I try to install it.
The problem is that when I double click each of the setup.exe, it will show a pop up error:[A strong SA password is requires for security reasons. Please use SAPWD switch to supply the same. Refer to readme for more details. Setup will now exit.]
Then I found a solution from Microsoft, it told me that: 1. Run the setup in the command prompt 2. Locate in the extracted path 3. type --> "Setup.exe /qb+ INSTANCENAME=NetSDK DISABLENETWORKPROTOCOLS=1 SAPWD=<pwd>"
p.s. I have changed the <pwd> to 123abc
However....another Error Occur:1st pop up --> [Unable to determine system default collation.]2nd pop up --> [Microsoft SQL Server Desktop Engine Setup failed.]
My Question:1. Why the error still occour when I type that command to setup? (Solution from Microsoft)2. How can I fix it and complete the installation?3. How many users(maximum) can be created in a MSDE database?
Greateful if anyone can give me hand.
How do I add login user ASPNET to my SQL 2000 Desktop Engine Server?. I can not find the "Server Manager" in the Start - Programs. Is there any other way to get around adding ASPNET login to the SQL server so I can test my VB program. I got the error: Login failed for user 'com_nameASPNET'.
View 1 Replies View RelatedIn my ASP.NET app, I'm executing a stored procedure via a SQLCommand the searches a customer database. I believe the default timeout is 90 seconds. I'm curious of what happens to the SQL Server Stored Procedure after timing out from the ASP.NET application. Does it timeout at the same time or do you have to set up a value in SQL Server?
View 1 Replies View RelatedHello, I am a SQL rookie. I have followed the tutorial and installed MSDN as it says. However, I am unable to create a database with WebMatrix. I keep getting an error that reads "SQL Server does not exist or access denied. ConnectionOpen (Connect())."
When I loaded the SQL, everything seemed to go well. I got all of the results that the tutorial said I should.
Please advise on my next steps. Thank you in advance.
JS
If you have a SQL server setup that isn’t using a SAN but just a normal raid array and you wanted to utilize a SAN now.
What are the steps, I'm guessing that you will need to start the services under a domain user correct?
Is it as easy as detaching the DB and then reattaching the DB on the SAN?
I'm assuming you need to map the data and log arrays from the server to the SAN correct?
I can’t seem to find any documentation on moving a server to a new SAN. Can someone post links if you have them?
Do you need ENT edition or is Standard OK .
Thanks for your help.
Hi
I'm trying to set up a new job to update a field in the table, I've managed to get the select syntax to work, but when I added an IF statement and Update syntax it didn't like it and the following error was shown:-
Server: Msg 156, Level 15, State 1, Line 9
Incorrect syntax near the keyword 'BEGIN'.
This is the syntax I'm trying to use for the job:-
USE EmployerEngagement
IF (SELECT On_Stop
FROM tblEmployer LEFT OUTER JOIN tblWP_Details
ON tblEmployer.Emp_ID = tblWP_Details.Emp_ID LEFT OUTER JOIN tblVetting
ON tblWP_Details.Record_ID = tblVetting.Record_ID
WHERE tblEmployer.On_Stop = 0
AND tblVetting.Next_Vett_Date <= GETDATE())
BEGIN
UPDATE tblEmployer
SET On_Stop = 1
END
Basically I just want to change the On_Stop value from 0 to 1 if the Next_Vett_Date is before or on todays date.
Am I using the wrong syntax for this?
Thanks
How do i do it? do i have to set up an ODBC?
View 20 Replies View RelatedHello,I've noticed on my DTS that it is connecting to the remote SQL Servervia Named Pipes. Not sure why I've been getting the following error:[DBNETLIB][ConnectionWrite (WrapperWrite()).] but I wanted to changethe DTS from using Named Pipes to use TCP/IP. How to do it?Also, if anyone has any clues on what this error means, please let meknow!Step Error Source: Microsoft Data Transformation Services (DTS) DataPumpStep Error Description:The number of failing rows exceeds the maximumspecified. (Microsoft OLE DB Provider for SQL Server (80004005):[DBNETLIB][ConnectionWrite (WrapperWrite()).]General network error.Check your network documentation.)Step Error code: 8004206AStep Error Help File:sqldts80.hlpStep Error Help Context ID:0Tnks!
View 1 Replies View RelatedI am trying to connect to my database in SQL SERVER EXPRESS via dreamweaver. I am trying to create DSN connection but when i click on sql server in the optionlist it lists about 100 options of the sql server i want to connect to. How do I find out which one is the one I have my tables in and the sql server express that I use.
Cheers
I am unable to set the value of my SqlParameter unless it is to a string.sqlCmd.Parameters.Add('@myParameter', SqlDbType.Bit).Value := false;
Setting it to false or 0 results in error: "Incompatible types: 'Object' and 'Boolean' (or 'Integer')"
I've tried to cast them as objects and that didn't work. I don't understand why something like 'false' (as a string) will.
FYI: I'm using Delphi.NET and hating it.
sry im an idiotbut how do u take like "SELECTbla FROM blar WHERE blam=blfda" and make the thing it "selects" into a variable thnx
View 5 Replies View RelatedHi, I have just started with ASP, and have a problem. I have created a stored procedure which looks to a specific tablename for information, based upon the users choice from a dropdown list.
The control works fine when executed from within visual web developer, and I manually enter the value that the variable expects. However I can not get the dropdown listbox value to be written to the SQL value. I have tried for days, traweled the net for answers, borrowed 3ft in height of SQL books! so either I am doing something fundamentally wrong, or I am missing something. My SP is:
ALTER Procedure GenericTableSelect
@tablename VarChar(20)
AS
Declare @SQL VarChar(1000)
SELECT @SQL = 'SELECT [base model] FROM '
SELECT @SQL = @SQL + @tablename
Exec ( @SQL)
and from the page the command to call it is:
SelectCommand=generictableselect></asp:SqlDataSource>
But this fails to compile and comes back with "@tablename not defined"
any pointers in the right direction would help.
The object of this is for two drop down boxes - the first is populated from one database of categories, the selection of which populates the second drop down list with items from within that category.
Cheers,
Richard
Hello all,
I've gotten approval at my work place to implement a new web server cluster. We currently have one web server running Windows 2003 and one SQL 2005 box. I've gotten approval to purchase 2 new web servers that will eventually become our primary servers.
I've browsed Microsoft's site but can't seem to find any FAQ's or How-Tos on clustering that are of any help. Is there anyone out there who has some info that could help me get started?
Thanks.
Richard M
I have been using MySQL as the back end of my .Net 2.0 applications for a while using a custom membership provider without any problems.Having now switched to a new webhost which supports both MySQL and MS SQL Server 2005 and also creating a new site thought I should set up the new site to use MS SQL..... I am having trouble however setting up the SQL server to act as the membership provider. Following the advice on here I tried using aspnet_regsql.exe... Firstly, when trying to get the list of databasses on the remote server I get the following error: Failed to query a list of database names from the SQL Server. Invalid object name 'Sysdatabases' If I then just type in the name of my database and go through to the end I get the following error:Exception:An error occurred during the execution of the SQL file 'InstallCommon.sql'. The SQL error number is 8152 and the SqlException message is: String or binary data would be truncated. I can connect to my MS SQL server remotely without any problem using the likes of MS SQL Server Management Studio Express. Is there any other way I can setup the databases needed for user and roles access control or is the usage of MS SQL much more complicated than what MySQL was?
View 4 Replies View Related