New SQL 2005 Old SQL 7 And AS400 Need To Transfer Data
Nov 14, 2007
I am creating a migration tool that retrieves data from an AS400 and an SQL 7 server to create a new database in SQL 2005. I have managed to create a linked server in SQL 2005 to the AS400. I don't know if it works or not. I've been trying to create a linked server to the SQL 7 server with no luck. The AS400 and SQL servers are on the same network. The SQL 2005 server is hosted somewhere else. I have access to everything. The SQL 2005 server is running Workstation. I tried to use Integration Services but finally discovered it was unavailable to Workstation.
I could use some good ideas or help.
View 1 Replies
ADVERTISEMENT
Jan 24, 2007
Is there a good way to port data from an AS400 over to SQL server 2005? If anyone has any experience with this, can you tell me where to go to get info?
View 3 Replies
View Related
Mar 22, 2006
I have a simple SSIS package that I want to move data from SQL 2005 to DB2/AS400. In order to use OLEDDB destination, I installed HIS2004 that provides DB2OLEDB support.
For simplicity and testing purpose, I created a connection pointing to a SQL table that contains only one ccolumn "last_name" of type "nvarchar(50)". This is my source, I then created another connection using DB2OLEDB pointing to a table on DB2 that contains only one field "name" of type "GRAPHIC(50)". This is my destination and the connection works fine to DB2 database. When I run the package, it has type conversion error as follows:
[OLE DB Destination [34]] Error: An OLE DB error has occurred. Error code: 0x00040EDA. An OLE DB record is available. Source: "Microsoft DB2 OLE DB Provider" Hresult: 0x80040E07 Description: "Data or literal value could not be converted to the type of the column in the data source, and the provider was unable to determine which columns could not be converted. Data overflow or sign mismatch was not the cause.".
If I manually assign a vaule to the "last_name" using the "Derived Column" task like "Hello John", it just works fine.
Anyone knows what went wrong? Did I miss anything here? Thanks.
As a FYI: DTS works great in moving data from SQL 2000/2005 to DB2.
Your help will be appreciated.
View 2 Replies
View Related
Sep 11, 2007
Hi Guys
I am trying to replicate data from DB2/AS400 to SQL Server2005 (ENT edition) currently we use 3rd party tool to replicate data from DB2 to SQL Server2000 (ENT edition) and like to get rid of this 3rd party tool. I am searching for the last 3 weeks but didn€™t get a good starting point. I have linked DB2 to SQL Server2005 and can run queries against DB2/AS400 box. Now I want to set up transactional replication from DB2 to SQL Server 2005. I have read about peer to peer topologies but I don€™t know if that€™s the route I have to take?
So can someone please help me? I really appreciate your help.
Thanks
Tariq
View 1 Replies
View Related
Apr 18, 2007
Hi All,
I want to Import data from AS400 to Sql2005. From the Sql Management studio I invoke the Import Data wizard. For the source I connect to the ISereis system and for the Destination I select the Sql2005 Database , When I go to the next step i.e select source tables I get the error
"An error has occured which the SQL Server Integration Wizard was not prepared to handle
No error message available,result codeB_E_CANTCANCEL(0*80040E15).(System.Data)" .After this I am unable to proceed further. I am using client Access tool to connect to ISereis
IBM DB2 UDB for isereis IBMDA400 OLE DB Provider
Regds,
Anu
View 2 Replies
View Related
Feb 27, 2006
How can i transfer table records in a SQL 2005 express db (housed locally) to another SQL 2005 db (live)? I'm using the stripped down, free version Management Studio Express and can't find an "import table" function. Any information or links to information is appreciated.
regards,
dj
View 1 Replies
View Related
Apr 27, 2007
I am trying to copy a database from sql2000 to sql2005 but it is giving me the following error:
To connect to this server you must use SQL Server Management studio or SQL server management objects (SMO)
this can be done or servers are not compatible?
View 2 Replies
View Related
Nov 14, 2007
hi, i need to transfer data from a table in sql 2005 to another one with the same structure and data type definitions in oracle, i have made data flows in ssis that retrieve data from oracle to sql but none that made the other way...
1. is there any special connection type i must use?
2. do i need an odbc to connect to oracle?
where can i find information about!??
thanks for your help. !!!
View 2 Replies
View Related
Sep 25, 2007
Hi forum.
I have a problem to import dates from an excel table into MS SQL2k5 database. Some time ago worked but now I reived the next message:
Operation stopped...- Initializing Data Flow Task (Success)- Initializing Connections (Success)- Setting SQL Command (Success)- Setting Source Connection (Success)- Setting Destination Connection (Success)- Validating (Success)- Prepare for Execute (Stopped)- Pre-execute (Stopped)- Executing (Error) Messages * Error 0xc002f210: Preparation SQL Task: Executing the query "" failed with the following error: "Retrieving the COM class factory for component with CLSID {7816B7A3-CD60-4539-BD38-C35AFC61F200} failed due to the following error: 80040154.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. (SQL Server Import and Export Wizard) - Copying to [PMS].[dbo].[tbl_1$] (Stopped)- Post-execute (Stopped)- Cleanup (Stopped)
Can someone to help with this problem?
View 14 Replies
View Related
Jan 4, 2008
Hi,
I am trying to transfer data from a sql server 2000 database to a Sql Server 2005 database... and i just want to transfer around 2 tables.. and my sql server 2000 database is located in one machine and the 2005 database is located in the other machine.. So i am trying to insert data into the sql server 2005 database. So can i do it like this..
Insert into SqlServer2005comp.Databasename..TableName
(
Columns
)
Select
Columns
From
sqlserver2000comp.Databasename..tablenames
Where UserId = @UserId.
Is this the right way to do it.. and can i give this query in the sqlserver2005 db or the 2000 db
any help or ideas will be appreciated.
Regards...
Karen
View 9 Replies
View Related
May 28, 2008
Hi All! i have a database in SQLEXPRESS 2005 but i need to this Database in SQL 2000...there is any way to move data from sqlexpress 2005 to sql 2000.... please help me.....
View 4 Replies
View Related
May 8, 2007
Hi, I am attempting to create SSIS packages to extract data from our AS/400 DB2 databases and populate tables for analysis and reporting in SQLServer. We have recently installed a new 2005 SQL Server to replace our existing 2000 databases. I have several DTS packages setup to connect to the 400s and copy the needed data to SQL2000 and these work great but do not transition to SSIS very well. I can get my SSIS packages to work if I create a seperate data flow task for each table but that does not seem appropriate for a tool like SSIS. I would think that what I am attempting is a very common thing to do. Maybe other enumerators could be used but I have not been able to get it to work.
I am trying to use a foreach loop, currently with a forech item enumerator, to first truncate the table on the SQL Server database using an Execute SQL task, and the to use a Data Flow task to refresh the data using an ole db source and destination. I have the truncate portion working, but when I try to setup the Ole db source using a variable it tells me I have no input columns. I have a variable from the forech loop that loops through the table names, this variable is used in a second variable which is set to EvaluateAsExpression with the expression set to the follwoing: "select * from " + @table_name
I have set delayvalidation to true and validateexternalmetadata to false. What do I do in order to get around this issue? Also, how should the old db destination be set so that it load the data into the table specified in the variable?
Thanks for any help you can provide.
Keith C
View 6 Replies
View Related
Jan 4, 2008
Hi,
I am trying to transfer data from a sql server 2000 database to a Sql Server 2005 database... and i just want to transfer around 2 tables.. and my sql server 2000 database is located in one machine and the 2005 database is located in the other machine.. So i am trying to insert data into the sql server 2005 database. So can i do it like this..
Insert into SqlServer2005comp.Databasename..TableName
(
Columns
)
Select
Columns
From
sqlserver2000comp.Databasename..tablenames
Where UserId = @UserId.
Is this the right way to do it.. and can i give this query in the sqlserver2005 db or the 2000 db
any help or ideas will be appreciated.
Regards...
Karen
View 7 Replies
View Related
May 30, 2008
Is it possible/advisable when transfering very large amounts of data from server to server to:
trasnfer the data to a new table first
second alter new table adding indexes, defaults, ets based on original table
if it is what flow item would be used to transfer/alter the indexes and defaults?
I'm very new to ssis so the more detail you can give the better.
Thanks
View 5 Replies
View Related
Jun 2, 2006
I was trying to set up a replication process to move data from SQL 2005 to DB2/AS400.
To get it started, I have create a simplest table (say, PERSON) on SQL 2005 server, and the same table (PERSON) on DB2/AS400. I have only one column SSN (of type int). I have journaled the table on DB2 end. I was able to have successfully configured publisher (on SQL 2005) and subscriber (i.e. a pushed subscription). I used transactional replication. And I also installed HIS 2004 to have DB2OLEDB ready. I was able to use query/insert/delete against table on DB2 based the linked server (that I created for testing purpose).
I did a lot of reading on this and my impression is that replicating to DB2/AS400 is supported from SQL 2005. But I always have this error from replication monitor. Can anyone enlighten me what was wrong.
Command attempted:
CREATE TABLE MY_DB.PERSON(
SSN
INT NOT NULL)
(Transaction sequence number: 0x00000020000000F9000100000004, Command ID: 4)
Error messages:
A SQL error has occurred. Please consult the documentation for your specific DB2 version for a description of the associated Native Error and SQL State. SQLSTATE: 42710, SQLCODE: -601 (Source: MSSQL_REPL_DB2, Error number: -601)
Get help: http://help/-601
A SQL error has occurred. Please consult the documentation for your specific DB2 version for a description of the associated Native Error and SQL State. SQLSTATE: 42710, SQLCODE: -601 (Source: MSSQL_REPL_DB2, Error number: -601)
Get help: http://help/-601
View 11 Replies
View Related
Jul 1, 2007
Hello,
I have de same problem that you have to get data from AS/400 to SQL Server 2005 using the SQL Server Import and Export Wizard.
Did you successfully? If yes how please?
I have used:
IBM DB2 UDB for iSeries IBMDA400 OLE DB Provider,
IBM DB2 UDB for iSeries IBMDARLA OLE DB Provider,
IBM DB2 UDB for iSeries IBMDASQL OLE DB Provider,
Microsoft OLE DB Provider for DB2
Regards
Rui Martins Santos
RMS
View 2 Replies
View Related
Nov 3, 2005
I am attempting to transfer a table from an AS400 to SQL Server 2005 through SSIS. I am using the IBM DB2 UDB ISeries IBMDASQL OLEDB Provider as the source connector. I have tried to set up the source connector using the Table or View option but it says that No Tables Could Be Loaded. I can specify an SQL command and it shows the columns and appears to set up correctly except for showing a warning indicating that it cannot retrieve the column code page information from the OLEDB provider. When I run the job, it fails with the following error:
View 16 Replies
View Related
Jun 17, 2005
I've been trying to use the integrations services to access AS400 data with almost no success. Any suggestions or help you can give me would be appreciated. Some of the issues I can't make sense of are the following.
View 11 Replies
View Related
Mar 10, 2008
Hi all,
I have a issue need your great help. Would you please help to check it and tell mw how to fix this issue? Thanks.
*****All of softwares are English version****
Server:
WIndows Server 2003 SP2 + SQL Server 2005 SP2
AS400:
V5R4
Client :
Winsows XP SP2 + SQL Server 2005 SP2
Client Access V5R4 Full Version.
*****All of softwares are English version****
Issue:
I have a file in the AS400 with Chinese characters and need to dowload to SQL Sever 2005 daily.
In the SQL Server, I created a database and table which collection is "SQL_Latin1_General_CP1_CI_AS", and I modified one of field which collection is from "SQL_Latin1_General_CP1_CI_AS" to "Chinese_Taiwan_Stroke_CS_AS" (( the filed data type is "nvarchar" and the length is 42).
That mean that field can display the Chinese characters correctly.
In the SSIS,
1.Craeted a OLE DB Source to get the data ( The field name is "CUST_CHINESE_NAME" and the length is 42) from AS400
2.Craete a Data Conversion to convert that field from "String" to "Unicode String[DT_WSTR]" (The new field name is "Copy of CUST_CHINESE_NAME")
3.Create a Data Conversion 1 to convert that field from "Unicode String[DT_WSTR]" to "String[DT_STR]" and code page is change to "950"(The new field name is "Copy of Copy of CUST_CHINESE_NAME")
4. Creatd a OLE DB Destination to get that convert data and input the SQL Server ( the filed data type is "nvarchar" and the length is 42).
When I execute that SSIS, I got the error message in the third step.
****************************************************************************************************************************
[Data Conversion 1 [521]] Error: Data conversion failed while converting column "Copy of CUST_CHINESE_NAME" (487) to column "Copy of Copy of CUST_CHINESE_NAME" (544). The conversion returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[Data Conversion 1 [521]] Error: The "output column "Copy of Copy of CUST_CHINESE_NAME" (544)" failed because truncation occurred, and the truncation row disposition on "output column "Copy of Copy of CUST_CHINESE_NAME" (544)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Data Conversion 1" (521) failed with error code 0xC020902A. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC020902A. There may be error messages posted before this with more information on why the thread has exited.
****************************************************************************************************************************
View 10 Replies
View Related
Mar 29, 2006
Hi all
I am trying to connect to an AS400 to download data to a 64bit sql server 2005 server. I am able to do this easily by migrating existing sql2000 DTS packages but how do i do this is in an SSIS project creating the process from scratch? and how do i incorporate activex transforms like you could in DTS2000 into the trasnform with copy columns?
Please help i am slowly turning grey trying to get this to work.
thanks
Chris
View 1 Replies
View Related
Jun 7, 2007
Hello,
I want to set up As400 DB as a publisher and the sql server 2005 as a subscriper, so that I can read some data from AS400 DB in sql server 2005 and every evening, I need the replicated data from AS400 to be refreshed.
Can I do it ? If yes, how to do it?
Thanks
View 1 Replies
View Related
Apr 10, 2008
I am trying to send a file from SQL 2005 back to our AS400 DB2 db. First time trying to get this to work in SSIS.
I have a couple fields that are datetime in SQL Server and see SQL server sees datetime fields from DB2 as string so I am converting them to Strings using derived columns. That part seems to work fine. Get no errors on that part.
The conversions seem like they are working but it is faling when it tries to send it to as/400. I get the following error: any ideas on what is wrong?
[OLE DB Destination [1569]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "IBMDA400 File Rowset" Hresult: 0x80004005 Description: "CPF5029: Data mapping error on member DSSCNTL. ". An OLE DB record is available. Source: "IBMDA400 File Rowset" Hresult: 0x80004005 Description: "CPF5035: Data mapping error on member DSSCNTL. ". An OLE DB record is available. Source: "IBMDA400 File Rowset" Hresult: 0x80004005 Description: "CPF5035: Data mapping error on member DSSCNTL. ".
I even created a sql table with same field sizes as one I am sending to AS400 and its sucessful there. So seem like it mght have somthing to do with sending to AS400 but not sure what.
Any ideas?
Stacy
View 1 Replies
View Related
Jul 31, 2007
Hi all,
I am working at insurance company that using AS400 as it main server. All transaction data is already kept for about 10 years (or even more..). This data is growing larger from time to time, and after several upgrades (that cost a lot!), my supervisor has an idea to partly move the data from AS400 to SQL Server. (since the cost for upgrading sql server is cheaper than AS400).
So.. let say, we only want to kept data in AS400 from 4 years before until now (2004 – 2007), and the rest of data is kept in SQL Server.
So first, all transaction data from 1997 – 2003 is transferred to SQL and deleted in AS400.
If user queried data and didn’t found the data in AS400, it will search the SQL, if data is found in SQL, then data is transferred back to AS400 and deleted in SQL.
I’m using SQL Server 2000 DTS (use HiT OLEDB) to transfer the data from AS400 to SQL and vice versa.
I wanna ask if anyone has done this before? What’s the difficulties by using this approach? (btw, I will implement the DTS using user control in vb.net)
Or anyone has a better solution to overcome this problem?
Thanks,
[RU]
View 2 Replies
View Related
May 19, 2008
How do i import As400 data in to SQL2005(standard version) using SSIS?? Please help!!!
View 1 Replies
View Related
Dec 26, 2006
Anyone writing data to DB2 on an AS400 with SSIS?
I cannot get the OLEDB destination configured correctly. I can set the destination up with a SELECT sql query, and preview the resultset.
View 38 Replies
View Related
Aug 4, 2007
When I execute the package in Debug mode, it works.
I then import the package into SQL Server 2005 and it is showing under Stored Packages --> MSDB - AS400Package
I can right click and Run Package from there and it works fine.
When I set the package up to run as a job, it fails. What I have noticed is that the Sign On that I use in the package shows that there was in "invalid login" after the job fails.
I hope I have this post in the right place and hope I have left enough information behind to help. If not let know what else I need to post. I have only been using Business Intelligence Development for a couple days and SQL Server 2005 for about a week or so. All of the SQL DTS packages that I have created seem to be working fine with their jobs as well as my stored procedures.
Thanks for any help you can give me.
View 11 Replies
View Related
Jun 13, 2001
I need to have an automated process to read data from DB2/AS400 and feed it to SQL Server 2000. Has anyone done this before? Any suggestions how it may be done? I know my company doesn't want to spend a lot to do this.
Thanks for your time.
View 2 Replies
View Related
Apr 4, 2007
I have been trying to transfer some data from a file located in a AS400 Server to SQL , but the file has more than one Member Name. I'm not sure how to specify a different member name on the SQL query . Please help.
The name of the file is:
Library = MTGLIBP2
File Name = CHSAVQPL
Member Name = INS
this is the query I have so far but I still need to reference the Member Name
SELECT *
FROM OPENQUERY(AS400PL,'SELECT * FROM mtglibp2.CHSAVQPL')
View 1 Replies
View Related
Apr 30, 2007
I created a SSIS package moving data from a SQL 2005 table to an existing DB2 table on AS400 using Microsoft OLE DB Provider for DB2.
When the package was run, it showed that rows were successfully inserted to DB2. However, the data didn't seem to be converted correctly. Most of the string values were inserted as unusual characters. Also any string values of digits were not inserted.
For example, 1.) a character field (char(1) or nchar(1) as I have tried both types) in SQL 2005 table with a simple value of 'H' was inserted into the DB2 table field of type "A" (alphanumeric) of length 1 as 'ç' and others letters were inserted as other unusual characters. 2.) A string value of '00100' in SQL Server is not inserted to DB2 table at all.
Later we found that the fields inserted with usual characters are difined as CSSID =65535. A few fields with correct data inserted have CSSID=00037.
Does anyone know why this happened and how to solve this to get the data inserted correctly in the DB2 table?
Thanks in advance for any help!
View 3 Replies
View Related
Jun 10, 2005
Is there a as400/db2 native provider to extract data?
View 9 Replies
View Related
Jun 6, 2006
SĂĽleyman writes "I want to transfer databases with cubes and virtual cubes from SQL 2000 Analysis Server to SQL 2005 SQL Express.
1.how i can transfer the cubes?
2.how i can transfer the virtual cubes?
3.Why i see the tables(saw)and the cubes in SQL Managment only under Tables together and nothing under cubes?
Please help me
many thanks
SĂĽleyman from Germany/Frankfurt am Main"
View 1 Replies
View Related
Apr 17, 2007
Hi,
Yesterday I had posted a query of How to transfer the Data from AS400 files to Sql 2005 tables with DTS and the error I received for the same. I am not able to view the replies since it has been deleted. Pls repost the same. I posted the query expecting for a solution but instead my question was deleted..... the very purpose of forum is defeated.
Regds,
Anu
View 4 Replies
View Related
