Newbie Question On Accessing Count(*) Results
Oct 11, 2004
hello,
this is my sql query with access:
Dim SQLstr2 As String = "Select count(*) as total, oDate from Order_Details where oNo = " + Request("oNo") + " group by oDate"
However, problem is, I am clueless about how to access the data that is derived from my count(*).
I tried this: Response.Write(reader2("total"))
All I get is that No data exists for the row/column.
I tried not to select oDate and even took away the WHERE, but the same problem persists. Any ideas please?
View 1 Replies
ADVERTISEMENT
Nov 20, 2007
I have the following datasource...
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ***%>"
ProviderName="<%$ ***%>" SelectCommand='SELECT "var1", "var2", "var3" FROM "tbl1"'>
</asp:SqlDataSource>
Would it be possible to use VB code to read the reasults from this datasource? (There are conditions that restrict me from running the query itself through VB code.)
As always, any help is greatly appreciated. Thanks!
View 1 Replies
View Related
May 18, 2004
Hi,
Can anyone tell me how to access the results from a select statement within the stored procedure?
This is to implement auditting functionality, before updating a record i want select the original record and compare the contents of each field with the varibles that are passed in, if the fields contents has changed i want to write an audit entry.
So i'd like to store the results of the select statement in a variable and access it like a dataset. e.g
declare selectResult
set selectResult = Select field1,field2,field3 from table1
if selectResult.field1 <> @field1
begin
exec writeAudit @var1,@var2,var3
end
Many thanks.
View 4 Replies
View Related
Jun 5, 2006
Can I use sqlDatareader with a stored procedure to return more than one reultset that I ll be accessing through MyDatareader.MoveNext
Any Little example on both the stored proc and the .Net side
Thanks
View 4 Replies
View Related
Mar 19, 2007
Does anyone know if it is possible to access the execution plan results programmatically through a stored procedure or .NET assembly? I have the code sample
SET SHOWPLAN_XML ON; query... SET SHOWPLAN_XML OFF;
but it can only be run from the interface. I have tried a couple of solutions including dynamic sql to try to capture the results in a variable or file with no luck.
Does anyone know of a way to programmatically capture this information? We are doing some research with distributed query processing of dynamically generated queries using multiple processing nodes, and it would be helpful to know an estimate of how large the query is before sending it away to be processed.
I have looked at the dm_exec_query_stats view; but it can only be run on a query that has already been executed. I need to know the execution plan before the query is executed. If there is a way to get a query to show up in this view without being executed, then that would work as well.
Thanks -- MT
View 3 Replies
View Related
Jun 20, 2007
I've found example code of accessing an SQLDataSource and even have it working in my own code - an example would be Dim datastuff As DataView = CType(srcSoftwareSelected.Select(DataSourceSelectArguments.Empty), DataView) Dim row As DataRow = datastuff.Table.Rows(0) Dim installtype As Integer = row("InstallMethod") Dim install As String = row("Install").ToString Dim notes As String = row("Notes").ToString The above only works on a single row, of course. If I needed more, I know I can loop it.The query in srcSoftwareSelected is something like "SELECT InstallMethod, Install, Notes FROM Software"My problem lies in trying to access the data in a simliar way when I'm using a SELECT COUNT query. Dim datastuff As DataView = CType(srcSoftwareUsage.Select(DataSourceSelectArguments.Empty), DataView) Dim row As DataRow = datastuff.Table.Rows(0) Dim count As Integer = row("rowcnt") The query here is "SELECT COUNT(*) as rowcnt FROM Software"The variable count is 1 every time I query this, no matter what the actual count is. I know I've got to be accessing the incorrect data member in the 2nd query because a gridview tied to srcSoftwareUsage (the SQLDataSource) always displays the correct value. Where am I going wrong here?
View 6 Replies
View Related
Aug 23, 2006
My query returns a table of results, I would like to add a count columnthat contains the number of each result type returned.i.e.Type Count1 31 31 32 22 23 43 43 43 44 24 2Because there are 3 of type 1, 2 of type 2, 4 of type 3 etc...Is there straightforward way of doing this in SQL?Thanks
View 1 Replies
View Related
Jul 20, 2005
Just a quick question, how do I divide the results of these two queriestogether ?(select count (*) as ontime from schedule where actualarrivaldate <=estimatearrivaldate)(select count (*) as total from schedule)Thanks for any helpRobert
View 2 Replies
View Related
Apr 13, 2007
I have the following problem, I need to create the TotalsY and TotalsN values.
Can anybody give some direction on how to count these character values.
Column1 Y
Column 2 Y
Column 3 N
TotalsY 2
Totals N 1
Column1 =First(Fields!NOB_Pickup_L_D_T.Value)
Column 2 =First(Fields!NOB_Return_L_D_T.Value)
Column 3 =First(Fields!NOB_New_L_D_T.Value)
TotalsY 2 <I Dont Know>
Totals N 1 <I Don't Know>
Thanks,
Rick
View 1 Replies
View Related
Dec 4, 2007
I have a store procedure "Get_Student_By_District" ParameterDistrictID if null return all
Return: Value(DistrictID, DistricName, SchoolID, SchoolName, TeacherID, TeacherName, StudentID, StudentName)
I will need to write another store procedure to calculate the additional 7 fields and include all the information it already has to have one dataset for my table in a Report.
1. Number of Students for a given Teacher
2. Number of Students for a given School
3. Number of Students for a given District
4. Number of Teachers for a given School
5. Number of Teachers for a given District
6. Number of Schools for a given District
7. Number of Districts
What and how is the best way to do this?
Thanks
View 5 Replies
View Related
Jan 18, 2003
Two tables: CompanyPrices(CompanyID, ProductID, Price), CompanyRegion(CompanyID, Region)
ProductID is the primary key.
I want to get 10 smallest prices in each Region. In other words, I am looking for 10 cheapest prices in each region. So, if there are 20 regions, I should get excatly 200 rows having prices for products from 200 companies if there were at least 10 companies in each region.
I tried the follwoing, but get incorrect results.
select S1.Region, S1.Price from (select CompanyPrices.*, Region from CompanyPrices inner join CompanyRegion on CompanyPrices.CompanyID=CompanyRegion.CompanyID) S1 inner join
(select CompanyPrices.*, Region from CompanyPrices inner join CompanyRegion on CompanyPrices.CompanyID=CompanyRegion.CompanyID) S2 on S1.Region = S2.Region
group by S1.Region, S1.Price having count(*)<=10 order by S1.Region, S1.Price
However, if I want to get 10 cheapest products for each company, the above sql works by modifying the join condition. Instead of S1.Region = S2.Region , I use S1.CompanyID = S2.CompanyID and I get correct results for 10 cheapest products for each company.
select S1.CompanyID, S1.Price from (select CompanyPrices.*, Region from CompanyPrices inner join CompanyRegion on CompanyPrices.CompanyID=CompanyRegion.CompanyID) S1 inner join
(select CompanyPrices.*, Region from CompanyPrices inner join CompanyRegion on CompanyPrices.CompanyID=CompanyRegion.CompanyID) S2 on S1.CompanyID = S2.CompanyID
group by S1.CompanyID, S1.Price having count(*)<=10 order by S1.CompanyID, S1.Price
I am not sure what is wrong in the first query and why it does not work when the second one works. Could someone help in making the first query work to give me correct results?
View 2 Replies
View Related
Jun 6, 2008
Hey all - VERY new to SQL so I apologize if I butcher normally trivial things :)
Looking to run a query that will retrieve the number of results returned from a select statement...
Currently have a LicenseID table with a Software column...the statement that works on it's own that i've got is:
SELECT * FROM Software WHERE LicensesID = 2
Currently when I run that with the data so far I get 4 results returned to me...how can I add to that statement so that instead of displaying the results themselves, I just get the number 4 returned as a total number of results?
Thanks all!
View 2 Replies
View Related
Nov 28, 2007
I'm reading a lot of data from a database using SqlDataReader. Now I'd like to report the progress to the user, but for this I need to know in advance how many items SqlDataReader will return.
Is there any way to get this 'number of expected results' from the SqlDataReader?
tia,
Sam
View 1 Replies
View Related
Feb 12, 2008
I have 2 tables. Product, ProductCategory.
Product table consists of (productid, productname, producttypeid, createdate, portid)
productcategory consists of (productid, categoryid, productcategoryid, categoryid, prodroletypeid, createdate)
I want to write sql query to get the unique products. So the count should only give one value/resuls. But when I run the following query, I am getting more than one rows
select count(distinct categoryid) as uniquecat
from productcategory as pc, product as p
where pc.prodroletypeid in ('P', 'F')
and pc.createdate <= dateadd(d, 30, getdate())
and p.portid = 100
group by pc.productid
View 3 Replies
View Related
May 17, 2007
Iam using front page to dispalay my results.
At the bottom it shows me 1/10 i.e 1st page of 10 pages.
but what do i do if i want it to be shown as 1-10 out of 100 (if each page contains 10 results).
or it would be really good if i get count of both no. of recors as well as no. of pages.
View 2 Replies
View Related
Jul 20, 2005
I have a table that seems to have a bad index. When I do the followingquery I get inconsistant and needless to say incorrect results.select count(*) from mytable where mycolumn = 1If I remove the index from "mycolumn" the query works correctly. If Iadd the index back (even with a new name etc...) it doesn't workright.Has anyone ran into this? or does anyone know how I can fix thisproblem?It seems that removing the index is not really removing everythingbecause when I add a new one I get this same problem... btw, this isisolated to this column on this table. all other indexes within thedatabase are fine.Any help would be appreciated.Thanks,dharper
View 1 Replies
View Related
Sep 6, 2007
I have an aggregate transform that outputs two columns, a group by (DT_STR) and a count(column name) (DT_UI8). The results are put into a Recordset Destination. When I attempt to map these columns to variables in a Foreach Loop Container (using a Foreach ADO Enumerator), I get the error:
Error: 0xC001F009 at ExtractNNRPersonUpdates: The type of the value being assigned to variable "User::NNRPersonCount" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Error: 0xC001C012 at Foreach Household Loop Container: ForEach Variable Mapping number 2 to variable "User::NNRPersonCount" cannot be applied.
The variable mentioned in the error message is setup as a UInt64. I've tried all other integer data types and nothing works. I also tried changing the data type of the count coming out of the Aggregate transform but received a warning stating this isn't possible.
Any idea what I may be doing wrong?
View 3 Replies
View Related
Sep 12, 2013
I need to query the count of an occurrence in a given period of time, so I created this query. But it does not give me any results.
SELECT TOP 1000
o.[ID]
,o.[TimeOfOrder]
,x.[StreeLine1]
FROM [SC].[dbo].[bvc_Order] o
FULL JOIN SC.dbo.xmlAddressRead x
ON o.ID= x.id
WHERE DATEDIFF(HOUR,o.[TimeOfOrder],(DATEADD(Hour, -48, GETDATE()))) < 48
GROUP BY x.[StreeLine1], o.ID, o.TimeOfOrder
HAVING COUNT(x.[StreeLine1])>1
Then I change the query slightly and I ask it to show me the ones that are going to '599 Ships Landing Way' and it gives me 356 results! The Query doesn't crash, but it doesn't give me the results I need. What did I do incorrectly?
SELECT TOP 1000
o.[ID]
,o.[TimeOfOrder]
,x.[StreeLine1]
FROM [SC].[dbo].[bvc_Order] o
FULL JOIN SC.dbo.xmlAddressRead x
ON o.ID= x.id
WHERE DATEDIFF(HOUR,o.[TimeOfOrder],(DATEADD(Hour, -48, GETDATE()))) < 48
AND x.[StreeLine1]='599 Ships Landing Way'
I use Microsoft SQL 2008
View 12 Replies
View Related
Jan 28, 2014
These separate COUNT queries are very fast:
SELECT COUNT(id) as viewcount from location_views WHERE createdate>DATEADD(dd,-30,getdate()) AND objectid=357
SELECT COUNT(id)*2 as clickcount FROM extlinks WHERE createdate>DATEADD(dd,-30,getdate()) AND objectid=357
But I want to add the COUNT statements, so this is what I did:
select COUNT(vws.id)+COUNT(lnks.id)*2 AS totalcount
FROM location_views vws,extlinks lnks
WHERE (vws.createdate>DATEADD(dd,-30,getdate()) AND vws.objectid=357)
OR
(lnks.createdate>DATEADD(dd,-30,getdate()) AND lnks.objectid=357)
Turns out the query becomes immensely slow. There must be something I'm doing wrong here which results in such bad performance, but what is it?
View 7 Replies
View Related
Feb 24, 2007
Hi there
I sorry if I have placed this query in the wrong place.
I'm getting to grips with ASP.net 2, slowly but surely!
When i try to access my site which uses a Sql Server 2005 express DB i am receiving the following error:
Server Error in '/jarebu/site1' Application.
Database 'd:hostingmemberasangaApp_DataASPNETDB.mdf' already exists.Could not attach file 'd:hostingmemberjarebusite1App_DataASPNETDB.MDF' as database 'ASPNETDB'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Database 'd:hostingmemberasangaApp_DataASPNETDB.mdf' already exists.Could not attach file 'd:hostingmemberjarebusite1App_DataASPNETDB.MDF' as database 'ASPNETDB'.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): Database 'd:hostingmemberasangaApp_DataASPNETDB.mdf' already exists.
Could not attach file 'd:hostingmemberjarebusite1App_DataASPNETDB.MDF' as database 'ASPNETDB'.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735075
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
This is the connection string that I am using:
<connectionStrings>
<add name="ConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ASPNETDB.MDF;Integrated Security=True;Initial Catalog=ASPNETDB;User Instance=True" providerName="System.Data.SqlClient"/>
</connectionStrings>
The database is definitly in the folder that the error message relates to.
What I'm finding confusing is that the connection string seems to be finding "aranga"s database.
Is it something daft?
Many thanks.
James
View 1 Replies
View Related
Aug 6, 2006
With the function below, I receive this error:Error:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.Function:Public Shared Function DeleteMesssages(ByVal UserID As String, ByVal MessageIDs As List(Of String)) As Boolean Dim bSuccess As Boolean Dim MyConnection As SqlConnection = GetConnection() Dim cmd As New SqlCommand("", MyConnection) Dim i As Integer Dim fBeginTransCalled As Boolean = False
'messagetype 1 =internal messages Try ' ' Start transaction ' MyConnection.Open() cmd.CommandText = "BEGIN TRANSACTION" cmd.ExecuteNonQuery() fBeginTransCalled = True Dim obj As Object For i = 0 To MessageIDs.Count - 1 bSuccess = False 'delete userid-message reference cmd.CommandText = "DELETE FROM tblUsersAndMessages WHERE MessageID=@MessageID AND UserID=@UserID" cmd.Parameters.Add(New SqlParameter("@UserID", UserID)) cmd.Parameters.Add(New SqlParameter("@MessageID", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() 'then delete the message itself if no other user has a reference cmd.CommandText = "SELECT COUNT(*) FROM tblUsersAndMessages WHERE MessageID=@MessageID1" cmd.Parameters.Add(New SqlParameter("@MessageID1", MessageIDs(i).ToString)) obj = cmd.ExecuteScalar If ((Not (obj) Is Nothing) _ AndAlso ((TypeOf (obj) Is Integer) _ AndAlso (CType(obj, Integer) > 0))) Then 'more references exist so do not delete message Else 'this is the only reference to the message so delete it permanently cmd.CommandText = "DELETE FROM tblMessages WHERE MessageID=@MessageID2" cmd.Parameters.Add(New SqlParameter("@MessageID2", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() End If Next i
' ' End transaction ' cmd.CommandText = "COMMIT TRANSACTION" cmd.ExecuteNonQuery() bSuccess = True fBeginTransCalled = False Catch ex As Exception 'LOG ERROR GlobalFunctions.ReportError("MessageDAL:DeleteMessages", ex.Message) Finally If fBeginTransCalled Then Try cmd = New SqlCommand("ROLLBACK TRANSACTION", MyConnection) cmd.ExecuteNonQuery() Catch e As System.Exception End Try End If MyConnection.Close() End Try Return bSuccess End Function
View 5 Replies
View Related
Apr 1, 2007
hi, like, if i need to do delete some items with the id = 10000 then also need to update on the remaining items on the with the same idthen i will need to go through all the records to fetch the items with the same id right? so, is there something that i can use to hold those records so that i can do the delete and update just on those records and don't need to query twice? or is there a way to do that in one go ?thanks in advance!
View 1 Replies
View Related
Mar 25, 2015
I have four tables: Customer (CustomerId INT, CountyId INT), County (CountyId INT), Search(SearchId INT), and SearchCriteria (SearchCriteriaId INT, SearchId INT, CountyId INT, [others not related to this]).
I want to search Customer based off of the Search record, which could have multiple SearchCriteria records. However, if there aren't any SearchCriteria records with CountyId populated for a given Search, I want it to assume to get all Customer records, regardless of CountyId.
Right now, I'm doing it this way.
DECLARE @SearchId INT = 100
SELECT * FROM Customer WHERE
CountyId IN
(
SELECT CASE WHEN EXISTS(SELECT CountyId FROM SearchCriteria WHERE SearchId = @SearchId)
THEN SearchCriteria.CountyId
[Code] .....
This works; it just seems cludgy. Is there a more elegant way to do this?
View 4 Replies
View Related
May 25, 2015
below data,
Countery
parentid
CustomerSkId
sales
A
29097
29097
10
A
29465
29465
30
A
30492
30492
40
[code]....
Â
Output
Countery
parentCount
A
8
B
3
c
3
in my count function,my code look like,
 set buyerset as exists(dimcustomer.leval02.allmembers,custoertypeisRetailers,"Sales")
set saleset(buyerset)
set custdimensionfilter as {custdimensionmemb1,custdimensionmemb2,custdimensionmemb3,custdimensionmemb4}
set finalset as exists(salest,custdimensionfilter,"Sales")
Set ProdIP as dimproduct.dimproduct.prod1
set Othersset as (cyears,ProdIP)
(exists(([FINALSET],Othersset,dimension2.dimension2.item3),[DimCustomerBuyer].[ParentPostalCode].currentmember, "factsales")).count
it will take 12 to 15 min to execute.
View 3 Replies
View Related
Feb 12, 2008
Hello. I currently have a website that has a table on one webpage. When a record is clicked, the primary key of that record is transfered in the query string to another page and fed into an sql statement. In this case its selecting a project on the first page, and displaying all the scripts for that project on another page. I also have an additional dropdownlist on the second page that i use to filter the scripts by an attribute called 'testdomain'. At present this works to an extent. When i click a project, i am navigated to the scripts page which is empty except for the dropdownlist. i then select a 'testdomain' from the dropdownlist and the page populates with scripts (formview) for the particular test domain. what i would like is for all the scripts to be displayed using the formview in the first instance when the user arrives at the second page. from there, they can then filter the scripts using the dropdownlist.
My current SQL statement is as follows.
SelectCommand="SELECT * FROM [TestScript] WHERE (([ProjectID] = @ProjectID) AND ([TestDomain] = @TestDomain))"
So what is happening is when testdomain = a null value, it does not select any scripts. Is there a way i can achieve the behaivour of the page as i outlined above? Any help would be appreciated.
Thanks,
James.
View 1 Replies
View Related
May 14, 2008
Hi All,
I have a stored proc which is executing successfully...but the results of that stored proc are displaying in the Messages Tab instaed of results Tab. And in the Results Tab the results shows as 0..So, Any clue friends..it is very urgent..I am trying to call this stored proc in my Report in SSRS as well but the stored proc is not displaying there also...Please help me ASAP..
Thanks
dotnetdev1
View 4 Replies
View Related
Jun 18, 2008
Hi all, I have the following SQLDataSource statement which connects to my Gridview:<asp:SqlDataSource ID="SqlDataSourceStandings" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" SelectCommand="SELECT P.firstName, P.lastName, T.teamName, IsNull(P.gamesPlayed, 0) as gamesPlayed, IsNull(P.plateAppearances,0) as plateAppearances, IsNull( (P.plateAppearances - (P.sacrifices + P.walks)) ,0) as atbats, IsNull(P.hits,0) as hits, P.hits/(CONVERT(Decimal(5,2), IsNull(NullIF(P.atbats, 0), 1))) AS [average], (P.hits + P.walks)/(CONVERT(Decimal(5,2), IsNull(NullIF( (P.atbats + P.sacrifices + P.walks) , 0), 1))) AS [OBP], (P.hits - (P.doubles + P.triples + P.homeRuns) + (2 * P.doubles) + (3 * P.triples) + (4 * P.homeRuns)) / (CONVERT(Decimal(5,2), IsNull(NullIF(P.atbats, 0), 1))) AS [SLG], P.singles, P.doubles, P.triples, P.homeRuns, P.walks, P.sacrifices, P.runs, P.rbis FROM Players P INNER JOIN Teams T ON P.team = T.teamID ORDER BY P.firstName, P.lastName"></asp:SqlDataSource>There are 8 teams in the database, and somehow the average and obp results are as expected for all teams except where T.teamID = 1. This doesn't make sense to me at all! For example, I get the following results with this same query: First NameLast NameTeamGPPAABHAVGOBPSLG1B2B3BHRBBSACRRBI
BrianAustinHope83432230.7187500.7352941.15625014612201221
GabrielHelbigSafe Haven62119141.0000000.9375002.1428576404111519
MarkusJavorSafe Haven82927200.8695650.8000001.21739114501021218
RobBennettMelville83029240.8275860.8333331.55172411904102117
AdamBiesenthalSafe Haven82929210.9130430.9130431.56521712631001015
ErikGalvezMelville82625180.7200000.7307691.24000011322101015 As you can see, all teams except for Safe Haven's have the correct AVG and OBP. Since AVG is simply H/AB, it doesn't make sense for Gabriel Helbig's results to be 1.00000. Can anyone shed ANY light on this please?Thank you in advance,Markuu ***As a side note, could anyone also let me know how I could format the output so that AVG and OBP are only 3 decimal places? (ex: 0.719 for the 1st result)***
View 2 Replies
View Related
Oct 19, 2007
Hi,
I have a web form that lets users search for people in my database they wish to contact. The database returns a paged set of results using a CTE, Top X, and Row_number().
I would like to give my users to option of removing individual people from this list but cannot find a way to do this.
I have tried creating a session variable with a comma delimited list of ID's that I pass to my sproc and use in a NOT IN() statement. But I keep getting a "Input string was not in a correct format." Error Message.
Is there any way to do this? I am still new to stored procedures so any advice would be helpful.
Thanks
View 3 Replies
View Related
Jan 30, 2008
Hi, when I copy and paste results from query analyzer into Excel it appears that values with zeroes at the end loose the zeroes. Example, if I copy and paste V128.0 into an Excel cell it comes out as V128 or if I copy 178.70 it displays as 178.7 - any ideas? I'm using SQL Enterprise Manager for 2000.
View 6 Replies
View Related
Jul 3, 2013
I am trying to get count on a varchar field, but it is not giving me distinct count. How can I do that? This is what I have....
Select Distinct
sum(isnull(cast([Total Count] as float),0))
from T_Status_Report
where Type = 'LastMonth' and OrderVal = '1'
View 9 Replies
View Related
Nov 26, 2007
I use SQL 2000
I have a Column named Bool , the value in this Column is 0�0�1�1�1
I no I can use Count() to count this column ,the result would be "5"
but what I need is "2" and "3" and then I will show "2" and "3" in my DataGrid
as the True is 2 and False is 3
the Query will have some limited by a Where Query.. but first i need to know .. how to have 2 result count
could it be done by Count()? please help.
thank you very much
View 5 Replies
View Related
Jul 23, 2005
SQL 2000I have a table with 5,100,000 rows.The table has three indices.The PK is a clustered index and has 5,000,000 rows - no otherconstraints.The second index has a unique constraint and has 4,950,000 rows.The third index has no constraints and has 4,950,000 rows.Why the row count difference ?Thanks,Me.
View 5 Replies
View Related
Aug 21, 2007
The following query returns a value of 0 for the unit percent when I do a count/subquery count. Is there a way to get the percent count using a subquery? Another section of the query using the sum() works.
Here is a test code snippet:
--Test Count/Count subquery
declare @Date datetime
set @date = '8/15/2007'
select
-- count returns unit data
Count(substring(m.PTNumber,3,3)) as PTCnt,
-- count returns total for all units
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date) as TotalCnt,
-- attempting to calculate the percent by PTCnt/TotalCnt returns 0
(Count(substring(m.PTNumber,3,3)) /
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date)) as AUPct
-- main select
from tblVGD1_Master m
left join tblVGD1_ClassIII v on m.SlotNum_ID = v.SlotNum_ID
Where left(m.PTNumber,2) = 'PT' and m.Denom_ID <> 9
and v.Act = 1 and m.Active = 1 and v.MnyPlyd <> 0
and not (v.MnyPlyd = v.MnyWon and v.ActWin = 0)
and v.[Date] between DateAdd(dd,-90,@Date) and @Date
group by substring(m.PTNumber, 3,3)
order by AUPct Desc
Thanks. Dan
View 1 Replies
View Related
