Next Execution Date Error In Ssrs 2005

Mar 7, 2008

Hi,

I am trying to schedule a report from Report Manager Interface (SSRS 2005) as below:

Scenario 1:

Start Date: GetDate() [today] e.g: 03/07/2008 (mm/dd/yyyy)
End Date: 31-dec-2009
Schedule: Monthly (Current Month) €“ Days: [any day in the Current Month which is < getdate()] e.g: March €“ 4th

Scenario 2:

Start Date: GetDate() [today] e.g: 03/07/2008 (mm/dd/yyyy)
End Date: 31-dec-2009
Schedule: Monthly (Less than Current Month) €“ Days: [any day] e.g: Feb €“ 12th

Scenario 3:

Start Date: GetDate() [today] e.g: 03/07/2008 (mm/dd/yyyy)
End Date: 31-dec-2009
Schedule: Monthly (Grater than Current Month) €“ Days: [any day] e.g: May €“ 10th


In all the above scenarios we observed a strange behavior of SSRS.

Scenario 1: Report is scheduled on 4th April 2008 where as it should be 4th March 2009.
Scenario 2: Report is scheduled on 12th Feb 2009 as expected.
Scenario 3: Report is scheduled on 10th May 2009 as expected.

Now, we changed the end date (31st Dec 2008) of scenario 1 as below:

Scenario 1:

Start Date: GetDate() [today] e.g: 03/07/2008 (mm/dd/yyyy)
End Date: 31-dec-2008
Schedule: Monthly (Current Month) €“ Days: [any day in the Current Month which is < getdate()] e.g: March €“ 4th

The next execution date is again 4th April 2008, which is wrong.

After scheduling the above reports we executed the below query in the ReportServer DB (SQL Prompt)

SELECT S.ScheduleId AS ScheduleId
, S.LastRunTime AS LastRunTime
, JA.Next_Scheduled_Run_Date AS NextRunTime
, RecurrenceType = CASE S.RecurrenceType
WHEN 1 THEN 'Once'
WHEN 2 THEN 'Hourly'
WHEN 3 THEN 'Daily'
WHEN 4 THEN 'Weekly'
WHEN 5 THEN 'Monthly'
WHEN 6 THEN 'Monthly'
END
FROM ReportServer.dbo.Schedule S WITH (NOLOCK)
Inner Join (
select j.name,max(ja.next_scheduled_run_date) as next_scheduled_run_date
from MSDB.dbo.SysJobActivity as ja WITH (NOLOCK)
inner join MSDB.dbo.SysJobs j WITH (NOLOCK) on ja.Job_ID = j.Job_ID
where ja.next_scheduled_run_date is not null and ja.next_scheduled_run_date >= Getdate()
group by j.name
) as JA on convert(nvarchar(256),S.ScheduleId) = convert(nvarchar(256),JA.name)
Where JA.name = (select top 1 name from msdb.dbo.sysJobs order by Date_Created desc )
-- Where JA.name in (select top 10 name from msdb.dbo.sysJobs order by Date_Created desc )

We have tried the same scenarios using the SSRS APIs. But unfortunately we received the same results.

Did anyone face this type of issue in past?
Is this a SSRS BUG or are we missing any point?

View 2 Replies


ADVERTISEMENT

SSRS Execution Log RSExecutionLog_Update Job Error

Sep 7, 2007

I have set up RSExecutionLog_Update using the following instruction:

http://technet.microsoft.com/en-us/library/ms161561.aspx

But when I execute this job, I get the following error:

Executed as user: SAVERSRPT1SYSTEM. ... 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:29:36 AM Error: 2007-09-07 11:29:45.39 Code: 0xC020902A Source: Update Parameters Derived Column [979] Description: The "component "Derived Column" (979)" failed because truncation occurred, and the truncation row disposition on "output column "ParametersStr" (999)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component. End Error Error: 2007-09-07 11:29:45.39 Code: 0xC0047022 Source: Update Parameters DTS.Pipeline Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Derived Column" (979) failed with error code 0xC020902A. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to st... The package execution fa... The step failed.


Could you please let me know why this is happening and how to resolve it? Thank you.

-Tae Lee

View 1 Replies View Related

Reporting Services :: SSRS Error With Data Driven Subscription Execution

Jun 1, 2015

I have an issue with a data driven subscription under SSRS 2008R2 in which users are emailed a message based on a condition. For the last two months the majority of the users were mailed the message successfully but this month two users failed to get their message. I checked the selected email address in our mail system and they seemed to be correct. But running these two address (unlike the others which ran sucssfully) caused an error and they did not receive their message.
 
The error in the SSRS log read:
 
Line 96485: library!ReportServer_0-81!b9c!05/29/2015-13:25:49:: Call to DeleteItemAction(|eju4fz45zsbn3sykjtpuegec|@|/XX/XXYYZZ/ Report Name123|).
Line 96486: library!ReportServer_0-81!b9c!05/29/2015-13:25:49:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: , Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException:
The item '|eju4fz45zsbn3sykjtpuegec|@|/XX/YYZZAA/ReportName123 |' cannot be found.;

View 3 Replies View Related

Stopping Cancelling Report Execution Reporting Services Ssrs 2005 Using The Web Service Api

Mar 23, 2008

Hello,
How can I stop a report I started by using:
ReportExecutionService rs = new ReportExecutionService()
.
.
.
rs.Render(...)


I need to stop the report when a user clicks a button in my aspx page.

TIA
gad

View 1 Replies View Related

Create Autometed Error Output .txt Named Date/time Of Execution

Jul 17, 2007

Hi all



i build package with error output .

current situation i create file .txt and conf. error flow to redirect rows and write the rows in the file



what i need create autometed file every time package executed contains all rows , named of the execution date ime





thanks & Regards









View 1 Replies View Related

SSRS 2005 - Email Report On Execution To Dynamic List With Dynamic Parameters = No Schedule

Nov 23, 2007

Hi,
I have a need to display on screen AND email a pdf report to email addresses specified at run time, executing the report with a parameter specified by the user. I have looked into data driven subscriptions, but it seems this is based on scheduling. Unfortunately for the majority of the project I will only have access to SQL 2005 Standard Edition (Production system is Enterprise), so I cannot investigate thoroughly.

So, is this possible using data driven subscriptions? Scenario is:

1. User enters parameter used for query, as well as email addresses.
2. Report is generated and displayed on screen.
3. Report is emailed to addresses specified by user.

Any tips on how to get this working?

Thanks

Mark Smith

View 3 Replies View Related

A .NET Framework Error Occurred During Execution Of User-defined Routine Or Aggregate -While Creating A SQL SERVER 2005 Stored Prodecure In VS.NET 2005

Aug 15, 2007

 Running [dbo].[insertlogin] ( @log = hiten, @pas = hiten ).A .NET Framework error occurred during execution of user-defined routine or aggregate "insertlogin": System.Data.SqlClient.SqlException: Must declare the scalar variable "@Log".System.Data.SqlClient.SqlException:    at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)   at System.Data.SqlClient.SqlInternalConnectionSmi.EventSink.ProcessMessagesAndThrow(Boolean ignoreNonFatalMessages)   at Microsoft.SqlServer.Server.SmiEventSink_Default.ProcessMessagesAndThrow(Boolean ignoreNonFatalMessages)   at System.Data.SqlClient.SqlCommand.RunExecuteNonQuerySmi(Boolean sendToPipe)   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()   at SqlServerProject1.StoredProcedures.insertlogin(SqlString log, SqlString pas).No rows affected.(0 row(s) returned)@RETURN_VALUE = Finished running [dbo].[insertlogin]. ***************************************************************all i am trying to do is :  creating a SP in VS using managed code and then trying to execute it. But every time i get the above error. If you can tell me how to edit connection string in this that would be very helpful. At present i am using :   Using conn As New SqlConnection("context connection=true") I tried to do "" ALTER ASSEMBLY SqlServerProject1 WITH PERMISSION_SET=EXTERNAL_ACCESS""but i get this error  ""  Msg 10327, Level 14, State 1, Line 1ALTER ASSEMBLY for assembly 'SqlServerProject1' failed because assembly 'SqlServerProject1' is not authorized for PERMISSION_SET = EXTERNAL_ACCESS.  The assembly is authorized when either of the following is true: the database owner (DBO) has EXTERNAL ACCESS ASSEMBLY permission and the database has the TRUSTWORTHY database property on; or the assembly is signed with a certificate or an asymmetric key that has a corresponding login with EXTERNAL ACCESS ASSEMBLY permission. If you have restored or attached this database, make sure the database owner is mapped to the correct login on this server. If not, use sp_changedbowner to fix the problem.""" *********************************************************************Plz help 

View 13 Replies View Related

.NET Error When Starting SSRS 2005

Mar 30, 2006

I installed SQL Server 2005 a while back and just tried to use the ReportServer recently and ran into a problem.

I tried accessing using http://babby/ReportServer (my report server and db server are both on 'babby') and got an ASP.NET runtime error (which wasn't displayed to me). So next I accessed locally at the server (babby) and got this error:

The current identity (NT AUTHORITYNETWORK SERVICE) does not have write access to 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files'.

I have done some searching on the Internet and there doesn't seem to be much info at all about SSRS 2005. I did found some MSDN info that suggested that NT AUTHORITYNETWORK SERVICE is the correct account to use when running SSRS under Win Server 2003 which I am.

'babby' is a Windows Server 2003 machine running IIS 6.0.

Any ideas?

View 1 Replies View Related

RsDataSourceNotFound Error In SSRS 2005

May 11, 2007

As soon as a report is re-deployed a refresh of the report in the viewer shows the following error message:

An error has occurred during report processing. (rsProcessingAborted)

The data source 'xxx' cannot be found. (rsDataSourceNotFound)

This error occurs irrespective of electing to re-deploy or not re-deploy the datasource, and the only solution seems to be to close the report viewer down and restart it.



Under RS2000 any changes that were made to a report, would automatically be shown to the user if the report was refreshed, without having to close the browser/application down and restart it.



How do I get around this error?

View 4 Replies View Related

SSRS 2005 Tuples Error

Jul 28, 2007

Hi,

I have created a cube with three dimensions and one fact. There is no problem While dragging the fields in the Browser window of the cube but the same fields dragging into the SSRS report i am getting the following message:

"The expression contains a function that cannot operate on a set with more than 4,294,967,296 tuples".


Can you please help me out.

Thanks
Dinesh

View 3 Replies View Related

Export To EXCEL Error In SSRS 2005

Apr 16, 2008

Hi All,

We are using the SSRS 2005 for developing reports. In that I have some problems/doubts.

My problems are:
I developed / designed the report using the SSRS 2005. And I uploaded the reports in to the report server. I can able to view the reports in the preview section as well thro the browser.

Problem 1:
Reports are having the huge amount of data (For: report is having > 800 Pages). So, when ever I am trying to export in to EXCEL that time I am getting MemoryOutOfException. If I having the less number of pages that time I getting the result. How I can export the report into excel with out MemoryOutOfException.

Problem 2:
Some Excel sheets are having more data for ex: 75000. In EXCEL it self we are having the limitation we can not create more than 65536 rows per sheet. So If I want to export these 75000 records into excel how I do it.

Problem 3:
For delivering the reports I am using file share subscription method in SSRS. For example my reports are having the huge amount of data. That time I getting the following status in report server €œFailure writing file Weekly Install Base Report @timestamp: An error occurred during rendering of the report.€?"

Software Platform:
1. SQL Server Reporting Services 2005
2. SQL Server 2000 Data base
3. Microsoft Office 2003

Thanks
Sundaraguru S

View 4 Replies View Related

SSRS 2005 Database Setup Error

Sep 26, 2007

Hi,

I am successfully installed SSRS 2005 in my PC winxp sp2.

BUt while trying to configure database (Previous 5 steps are green) i get the following error.

The feature: "Using other editions of SQL Server for report data sources and/or the report server database" is not supported in this edition of Reporting Services

my database version
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)

my reporting services version


ReportingServicesService!resourceutilities!9!9/26/2007-08:57:28:: i INFO: Reporting Services starting SKU: Standard

thank you in advance for any pointers.

regards
sahridhayan

View 1 Replies View Related

SSRS 2005 - Server Error In '/Reports' Application.

Oct 18, 2006

When trying to open the reports server \servername
eports we are getting an error page titled "Server Error in '/Reports' Application." The server has been restarted, and as this is a new deployment, there has been very little access for individuals to make changes.

Any ideas on how to resolve the problem?

Thanks in advace

View 11 Replies View Related

Excel Damage To The File Error When Exporting With SSRS 2005

Jul 26, 2006

I am getting an error: "Damage to the file was so extensive that repairs were
not possible. Excel attemted to recover your formulas and values, but
some data may have been lost or corrupted." in some instances when
exporting toexcel.

The report is no different than any othere report. This report uses rectagles and text boxes to control layout with two tables but it's pretty straight forward. This only happens for this particular report when exported only to Excel. I am using SQL2005 SP1.

Any ideas, thoughts, or references are welcome.

View 2 Replies View Related

SSRS 2005 Web Farm Error : The Delivery Extension For This Subscription Could Not Be Loaded.

Jun 22, 2007

We are using RS2005 for a year now and never had any problems especially with mail subscriptions.

Since we transferred from single RS machine to web farm everything works ok except mail subscriptions. Subscription sometimes (?!?!?!?!) refuse to export report to a document of any kind. I repeat that this is a random thing which is more often with PDF and less with Web Archive or Excel. We are using shared schedules and on demand execution of AddEvent stored procedure by night batches to send mail to users. Also, original error from RS log says something that this kind of operation is not supported for server working in native mode. We don't have SharePoint so we never used it in any other way then native mode and it worked.



Any idea will be appreciated!

Thanks in advance.



Update 26.06.2007

It seems that problem is not loading dll used to export report to a file but loading email subscription extension (dll that needs to be loaded for execution of email subscription.)





Original error from RS Log:

w3wp!library!1!06/22/2007-11:06:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: The operation is not supported on a report server that runs in native mode., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: The operation is not supported on a report server that runs in native mode.
w3wp!extensionfactory!1!06/22/2007-11:06:43:: e ERROR: Exception caught instantiating Report Server DocumentLibrary report server extension: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.TypeInitializationException: The type initializer for 'Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider' threw an exception. ---> Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: The operation is not supported on a report server that runs in native mode.
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck)
at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache)
at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at Microsoft.ReportingServices.Diagnostics.ExtensionClassFactory.CreateExtensionObject(Extension extConfig).

View 6 Replies View Related

SSRS Date Parameter - Showing Date Format On Right Hand Side

Jul 24, 2007

I am having report parameter end date I am showing the default value "5/21/2007 11:59:59 PM" in the end date paramter. And also I want to show date time format "(MM/DD/YYYY HH:MMS)" in the right hand side of the parameter. How to do this?



Thank You

View 1 Replies View Related

Date Parameter In SSRS - Allow Drop Down For A Date Range To Be Selected

Aug 11, 2013

Date parameter. I created a report that allows a drop down for a date range to be selected. However, whenever I preview the report, I get an error. I know my error stems from my date fields being in this format "201301" , and the "date/ time" in SSRS being mm/dd/yyyy on the drop down calendar in SSRS.

I know the direction I want to go in, but just a little confused on where would I use the convert or cast function. Would it be in the data parameter itself, or a part of the query before the @start date and @End date?

View 18 Replies View Related

SSRS - Matrix Report (Reference Date And Main Date)

Nov 19, 2007

Dear Friends,
I have a doubt related with a report parameter in matrix control.
I have this interface:













Valor da Carteira (VC)
29-12-2006
31-07-2007

Valor Carteira
EBIT (Ytd)
Valor Carteira
EBIT (Ytd)

Sub-Total
Securities
Equities
120.213.477,65

758.105.292,62
-100.201.155,67

Bonds
4.012.782.282,99

3.355.388.548,39
-3.723.587.783,92

Warrants Equity



27.167,63


99.999.999,00
99.999.999,00
99.999.999,00
99.999.999,00

Traded and OTC Options

99.999.999,00
99.999.999,00
99.999.999,00
99.999.999,00

Other Derivatives

99.999.999,00
99.999.999,00
99.999.999,00
99.999.999,00

Money Market

99.999.999,00
99.999.999,00
99.999.999,00
99.999.999,00

Others




0,00


99.999.999,00
99.999.999,00
99.999.999,00
99.999.999,00

The MDX statment:


Code Block
SELECT NON EMPTY {
[Measures].[NC_ValorCarteira],
[Measures].[CM_EBIT] } ON COLUMNS,
NON EMPTY { (
[DimTime].[Hierarquia].[Dias].ALLMEMBERS *
[DimStructure].[Entidade_ID].[Entidade_ID].ALLMEMBERS *
[DimStructure].[Carteira_ID].[Carteira_ID].ALLMEMBERS *
[InstrumentoTipo].[InstArea].[InstArea].ALLMEMBERS *
[InstrumentoTipo].[InstTipo].[InstTipo].ALLMEMBERS ) }
DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS
FROM (
SELECT ( { [DimTime].[Dia].&[8878],[DimTime].[Dia].&[9092] } ) ON COLUMNS FROM (
SELECT ( { [DimStructure].[Carteira_ID].&[LIS_CPR] } ) ON COLUMNS
FROM ( SELECT ( { [DimStructure].[Entidade_ID].&[LIS] } ) ON COLUMNS
FROM [cbRentabilidade])))
WHERE ( [DimTime].[Dia].CurrentMember )
CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS



I have 2 dates as input. The main date and reference date (Last date of previous year) of the main date.
At the moment I manually insert the values for main date and reference date, but I only one to select the main date and automatically insert in the first column of the matrix report the reference date.

Understood?
Thanks!!!

View 6 Replies View Related

Error While Viewing Reports Unable To Locate Control SSRS 2005: OReportCell

Apr 30, 2007

Hello Friends,
I have created few reports in SSRS 2005 on Windows 2003 Standard. Previouly I was not able to view reports from my .ASPX page which contained a ReportViewer, after going throuhg some other threads I was able to create a snap-shot for my reports . But still I'm not able to view reports, each time I try to view the page I get a message box with a error as : "Unable to locate control SSRS 2005: oReportCell" the same error is displayed when i try to access my reports from "http://localhost/reports.....".
But the funny thing is I'm able to view the reports when I use the following URL: "http://localhost/reportserver/pages/reportviewer.aspx?/<report>". I have applied all the Hotfixes & installed the latest Service packs. Any suggestions ???????

View 1 Replies View Related

Integration Services :: SharePoint SSRS Subscription Execution From SSIS Using Powershell

Oct 26, 2015

We have been looking for a way to executing bursting of SSRS reports within SharePoint (integration mode) from a SSIS package after a successful load. We found this MSDN article which has a PowerShell script to "fire" a subscription.URL....One of the parameter needed is the SubscriptionID.

View 4 Replies View Related

SSRS Report Viewer Execution ' ' Cannot Be Found (rsExecutionNotFound) Reserved.ReportViewerWebControl.axd

Nov 19, 2007

Re: SSRS report viewer Execution ' ' cannot be found
(rsExecutionNotFound) Reserved.ReportViewerWebControl.axd



Every now and then, my users get this error while in the Reportviewer.


Usually, they have to close the window where the report was rendered
and pull it open again. Attempting to open the report again does not
work.


What is this?


I run the report viewer like this:


<rsweb:ReportViewer BackColor="Transparent" ZoomMode="Percent"
width="100%" ProcessingMode="Remote" ID="ReportViewer1"
runat="server">
<ServerReport ReportPath="/myfolder/myreport"
ReportServerUrl="http://myserverr/reportserver" />
</rsweb:ReportViewer>


In my web config:


<compilation debug="true" strict="false" explicit="true">
<assemblies>
<add assembly="System.Data.OracleClient, Version=2.0.0.0,
Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="Microsoft.ReportViewer.Common, Version=8.0.0.0,
Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
<add assembly="Microsoft.ReportViewer.WebForms, Version=8.0.0.0,
Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
</assemblies>
<buildProviders>
<add extension=".rdlc" type="Microsoft.Reporting.RdlBuildProvider,
Microsoft.ReportViewer.Common, Version=8.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a"/>
</buildProviders>
</compilation>


<httpHandlers>
<add path="Reserved.ReportViewerWebControl.axd" verb="*"
type="Microsoft.Reporting.WebForms.HttpHandler,
Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a" validate="false"/>
</httpHandlers>


Thanks for any help or information.

View 1 Replies View Related

List Of Parameters Used Together With Rs: Parameter In SSRS 2000 And SSRS 2005

Apr 24, 2007

Hi,

Does anyone know of a link or list that has all the parameters for the "rs:" section of the URL access parameter, except for the ones in the Microsoft books?

Thanks,

View 1 Replies View Related

Can I Write SSRS 2008 Reports To Run On SQL 2005 SSRS?

Sep 12, 2007

Is it possible to write SSRS 2008 reports to run on an existing SSRS 2005 server?

If yes, what do I need to do to be able to write SSRS 2008 reports on my developer PC that will run on the SQL 2005 Server (which also has SSRS 2005 installed on it)?

I installed Visual Studio 2008 beta on the development PC and it appears that it needs SSRS installed on it too. So I installed SQL 2008 SSRS (SQL Server Reporting Services) and SQL 2008 Workstation Components onto the developer PC. Next I run the SQL 2008 "Reporting Services Configuration" tool. When I click on the "Web Service URL" section it hangs indefinitely and I have to force it closed.

The developer PC is Windows Vista Business.

Any suggestions on making this work, or any other information that you can think of that would allow me to use Visual Studio 2008 and the SQL 2008 "Report Designer Preview" tool to develop SSRS reports that will run on the SQL 2005 SSRS server?

Thanks!
-ErikR

View 4 Replies View Related

SSRS 2005 - Migrating SSRS Subscriptions

Oct 25, 2007



Hi,
We are in need of migrating SSRS subscriptions along with the reports. Could you please let me know the process ?

I really appreciate your help on this.

Thanks,
Sam

View 6 Replies View Related

SSRS Report Generator Hangs On Execution In BIDS And Report Manager

Apr 29, 2008

Hi,

I'm encounter lately some weird behaviour of SSRS in BIDS as well as after deploying on Reporting Server.
I'm running basic classical SQL SSRS Reports with Oracle DB connection. My reports have header and footer pagination and well defined report layer configuration. All the reports are simple based on one table and some basic parameters passed to query.

In query builder from BIDS from data tab, the query is running fine without any other execution delays. Also the query is runnign fine in PL/Dev environment.
When I switch in "Preview" mode the report hangs in execution and just showing "Report is being generated" without any resuts. After a while is generating an execution error (after 20 min).

The behaviour is the same after deployment on Report Server .
I now...here it comes...the problem is intermitent...some times the report is working...but most of the times it hangs on execution.
I checked the report from top to bottom and nothing's wrong from design perspective.

On other reports I don't have this problem and I don't understand where to start to investigate.

Any suggestions...I'm stuck here.

Thanks

View 1 Replies View Related

Getting The Date For 1st Of Last Month In SSRS

Dec 12, 2007

Hi All,

I am trying to get the 1st date of the previous month in SSRS and either displaying it or using it in a variable as a calculation or as a value for a filter query based in SQL. However, when I use the SQL equivalent it does not display anything. The SQL code is as below:

- DateAdd("mm", DateDiff("mm", 0, DateAdd("mm", -1, getdate())), 0)

I know I have to substitute the getdate() with today() in SSRS. Even then it still returns no value. Does it have anything to do with the DateInterval value of DateAdd() and DateDiff()? I have changed it to 'DateInterval.month', but then it says that the month portion is not recognised. Also, is there a DateInterval.week that can be used?

Your help is much appreciated.

Thanks & Regards,
Mohd Fadzli

View 5 Replies View Related

Date Format In Ssrs

Mar 28, 2007

i just want to get a date format like this 'dd-mmm-yyyy'

View 4 Replies View Related

SSRS Date Format

Oct 8, 2007

Hi



I am new to using Business Intelligence Development Studio. I have ' FROM' and 'TO' parameters set using DATETIME, when I select the dates I wish to use so I can generate a report it is displaying in the American format being mm/dd/yy, however the server only recognises dd/mm/yy, the server has SP2 installed.



Is there any way of formatting the calendar control so that dd/mm/yy is recognised instead of the American format.



Jas

View 2 Replies View Related

Displayed Date Format In SSRS?

Jan 29, 2008

My regional settings are set to the UK on the server and local machine. Does anyone know how to get SSRS displaying dates in DD/MM/YYYY format?

I have googled it, but just can not seem to find the answer.

View 9 Replies View Related

How Do I Use A Date Parameter Correctly In A SP To Be Used With SSRS

Mar 24, 2008



I am having trouble adding a smalldatetime parameter @ScrubbedDate to my procedure and getting it to work with my report.

I get the cannot convert string to smalldatetime error.

View 6 Replies View Related

Date Format SSRS Stores In DB

Feb 25, 2008



Hi,
I have report scheduled in a SSRS. SSRS creates a job and from MSDB.DBO.SysJobActivity the

Next_Scheduled_Run_Date column provides the next execution date of the report.

Can any one tell me what is the date format that SSRS stores is it a getdate() or a UTC Date??

View 1 Replies View Related

SQL Execution Error

Oct 2, 2007




I have converted a CF app to MSVS 2008 beta 2 and SQL Server CE 3.5 , everything seems to work except one query. It work in Query Designer nor can I load the form the datsource resides on. It will work if I just right click the query and left click preview data. The error is an SQL Execution Error.
Error source SQL Server Compact ADO.net Data Provider
Error Message: There was an error parsing the query [Token Line number = 1, Token Line offset = 121, Token in Error = Procedure]

SELECT RecNum, InvNum, InvoiceDate, Horsename, ProcedureCode, PartNum, Procedure, Qty, Rate, Amount, CostPerItem, Cost, Net, Type
FROM LineItem

Also tried this but the query designer won't allow the [ ] it removes them an fails the query.
SELECT RecNum, InvNum, InvoiceDate, Horsename, ProcedureCode, PartNum, [Procedure], Qty, Rate, Amount, CostPerItem, Cost, Net, Type
FROM LineItem


This is the SQL from the same program in MSVS 2005
SELECT RecNum, InvNum, InvoiceDate, Horsename, ProcedureCode, PartNum, [Procedure], Qty, Rate, Amount, CostPerItem, Cost, Net, Type
FROM LineItem

Also tried this but I get no data in the Proced column and Procedure is auto unselected in the Query Designer.
SELECT RecNum, InvNum, InvoiceDate, Horsename, ProcedureCode, PartNum, Qty, Rate, Amount, CostPerItem, Cost, Net, Type, 'Procedure' AS Proced
FROM LineItem


Is there a new symbol to use for protecting a column name?

Thanks Jon Stroh

View 3 Replies View Related

DTS Execution Error

Sep 19, 2007



when i execute a DTS to copy a database from one server to another, I am getting the following error:

[Microsoft][ODBC SQL Server Driver][SQL Server]OLE DB 'SQL OLEDB' reported an error.Authentication Failed.
[Microsoft][ODBC SQL Server Driver][SQL Server]OLE/DB provider returned message: Invalid authorization specification]
[Microsoft][ODBC SQL Server Driver][SQL Server]OLE DB error trace [OLE/DB Provider 'SQLOLEDB' IDB Initialize: Initiliaze returned 0x80040e4d: Authentication failed.].

Can somebody please help?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved