Hello,
does anyone know, when will the functionality of linked reports, my reports, data-driven subscriptions in MOSS integrated mode be enabled? Now it is according to Microsoft not supported. Will this be supported in the future ?Thanks.
Hello,
I have configured Reporting services to use MOSS integrated mode. I have two servers, one for MOSS and the other for SQL database and reporting server.
Since I am using NTLM for IIS authentication, I can only use "Trusted Account" for Reporting Service Integration.
Then I created a report in SQL Server BI development studio and deployed to a MOSS document library. The deployment was successful. However, when I tried to open the report, I got the following error message:
An error has occurred during report processing.
This data source is configured to use Windows integrated security. Windows integrated security is either disabled for this report server or your report server is using Trusted Account mode.
I have tried to switch to "Windows Authentication" for Reporting Service Integration, but this will give error for "Set Server Defaults" screen. Also the deployment from BI studio to MOSS will fail with authentication error. So I think I have to stay with "Trusted Account" option there.
What should I do to make the report accessible while using "Trusted Account"? Is there any configuration which has to be done for this purpose? Any input is appreciated.
Thanks,
Jun
I have a report where I use Globals!ReportName in the header of the report for the report title. In Development and on SSRS stand alone the value for Globals!ReportName is in mixed case and the file extension is omitted. When the report is published to a MOSS server integrated with SSRS the value for Globals!ReportName is all in lower case and the file extension is included.
Is there any reason for this change in behavior and is there a way I can put back the mixed case and omit the file extension?
We have reports in SharePoint integrated mode which are really slow when compared to native mode. I have been asked to research and give info on what exactly causes the delays.
Any articles which give me information as to what happens when a report is run from SharePoint server and where does it log.
Hi,
I got the following exception from the code listed below:
System.Web.Services.Protocols.SoapException occurred
Message="The operation is not supported on a report server that is configured to run in SharePoint integrated mode. ---> The operation is not supported on a report server that is configured to run in SharePoint integrated mode."
Source="System.Web.Services"
Actor="http://haileizws32b:8080/ReportServer/ReportService2005.asmx"
Lang=""
Node="http://haileizws32b:8080/ReportServer/ReportService2005.asmx"
Role=""
StackTrace:
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.PerformancePoint.Planning.Client.Common.ReportServer.ReportingServices2005.ListChildren(String Item, Boolean Recursive) in c:Officedev14ppsplanningclientCommonReportingServices2005.cs:line 1001
at Microsoft.PerformancePoint.Planning.Client.Common.DataAgent.RetrieveDirectoryStructureFromReportingServices(Object caller, Object parameters) in c:Officedev14ppsplanningclientCommonAgentsDataAgent.cs:line 2027
InnerException:
The code is like:
ReportingServices2005 reportingServices = new ReportingServices2005();
reportingServices.Url = "http://haileizws32b:8080/ReportServer/ReportService2005.asmx";
reportingServices.Credentials = System.Net.CredentialCache.DefaultCredentials
CatalogItem[] items = reportingServices.ListChildren("/", true); <== This code throws the exception.
I can browser and view the items from both Sharepoint site and ReportServer site without problem.
Can you tell me what is wrong?
Thanks a lot!
We are researching a SSRS and SharePoint integrated mode install and I have a question about report development. When SSRS is installed as integrated mode, there is no report sever to publish to and the reports are published to document libraries. What do you do when developing reports in Visual Studio? How do I publish the new reports?
I saw a white paper what seemed to suggest that you have to do report development in a native reporting services environment and re-publish to SharePoint. Is that true?
Here's a link to a blog that has the information:
http://blogs.msdn.com/sharepoint/archive/2007/02/19/microsoft-sql-server-2005-sp2-reporting-services-integration-with-wss-3-0-and-moss-2007.aspx
Thanks for the Help!
-Scott
I have recently installed Reporting Services Integrated mode with minor issues and at the end I was able to execute reports as well as add the content types.
I am now working on doing the same exact thing except I do not see Report Server Content types. I am able to upload a report and execute it but cannot add the Content Types. When I login into Central Administrator I see the content type in there. Is there something I am missing to add it to "My Site"
Thank you,
Dave
We have a Report Server integrated with SharePoint. A month ago we deployed a report (rdl file) in SharePoint, but the person who deployed it was no longer connected with us. So we decided to deactivate it in our Active Directory. Yesterday, our users returned issues regarding they are unable to access their report. I believe the issue was "object reference not set to an instance of an object".
So I tried to download the rdl file and redeployed it but i am getting error upon deploying to SharePoint. My workaround is to delete the rdl file in SharePoint, redeploy the shared datasource and shared datasets and the rdl file. It went and was now able to run the report in SharePoint.
Is there something relation/happened when deactivating the account in AD that users unable to access the report in SharePoint?
i have created an report which retrieve data from table which contains a datetime field. The data of that particular field is stored in UTC time. when i navigating the report from sharepoint site i wish the datetime field will be converted into local time based on the selected timezone of the user.
View 6 Replies View Relatedissue where SSRS reports being executed from a report library in SharePoint intermittently are reloaded after hitting the apply button to run. Â We are using SSRS 2010 and SharePoint 2013 in integrated mode. So a user clicks on the report, fills in the parameters and hits apply. Maybe 70% of the time the report runs fine. Â The other 30% the report just reloads and wipes out any parameter selections. We do have a load balancer in front of the web servers.
I've ran fiddler to capture some of the error logging.
HTTP/1.1 401 Unauthorized
Cache-Control: private
Content-Length: 16
Content-Type: text/plain; charset=utf-8
SPRequestGuid: 3101219d-876e-60c8-a883-dcdee38b81b5
request-id: 3101219d-876e-60c8-a883-dcdee38b81b5
[code]....
Things we have tried. Multiple versions of IE 8,9,10,11, Firefox, Chrome. Â All browsers seem to exhibit the behavior.
We ran so more traffic monitoring and it doesn't appear on these refreshes that report actually connects to the data context so it seems to be failing prior to that. (Possibly at the SharePoint server. Logging from the server apparently didn't show much in terms of when this occurred) It doesn't seem to matter if the report has 1 or 10 parameters.Â
We did notice that when we took the load balancer out of the equation and just hit the web server directly, the refreshes "appeared" to decrease in regularity but still occur.Also, the reports do not exhibit the refresh issue when running locally within Visual Studio 2013.
Hi,
I am receiving the following error when I run the report builder query. I am able to successfully select the dimensions and measures that I am intrested in but when I run the report I get the error message.
The 'PerspectiveID' custom property for the 'query' perspective is either not set or is not set to the string data type.
----------------------------
Semantic query execution failed.
----------------------------
Query execution failed for data set 'dataSet'.
----------------------------
An error has occurred during report processing.
I am testing this against both Adventureworks standard and enterprise cubes. Additionality I saw a post in this forum
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=368962&SiteID=1
that seemed related but I am using reporting services in sharepoint integrated mode so I am having a hard time trying to troubleshoot this.
Thanks,
Larry
We have SSRS reports (pointing to SQL 2012) containing cascading parameters that we have deployed on SharePoint 2013 and once a user makes a selection to the parent parameter, child parameters are getting refreshed based on the selection in the parent parameter and then we see this:
Once we hit Apply, the Loading image comes up and approximately10 seconds later, The whole webpage gets refreshed and the parameter selections get reset to default parameters.Â
This is getting frustrating because there are about 10 parameters in the report and once a user makes selections and hit apply if the page gets reset, the user has to make all the selections again.
We are working with Microsoft support on this who suggested us to increase the timeout setting of DistributedCache service on all our SharePoint servers which did seem to work initially but I do see this issue happening occasionally.
We have 64 bit MOSS with integrated SRS. This works quite well. You lose data-driven subscriptions until the release of SQL 2008. We want to build a custom subscription/workflow solution that renders reports and pops them into SharePoint lists. What we want to do is render thousands of reports into SharePoint document libraries and use workflow rules to route them to file shares, emails, approvals, etc.
This can be done manaully by right clicking the RDL in a report library and selecting Manage Subscriptions. This brings up a web page listing existing subscriptions (_layouts/ReportServer/ManageSubscriptions.aspx). This page does not write to a SharePoint list, but a set of tables in the ReportServerIntegrated database. I can see the tables and stored procedures that do the work. I cannot find a programming interface to create the subscriptions in code. I guess I can just call these stored procedures.
Has anyone played with this?
I'm running MOSS 2007 Enterprise, SQL 2005 SP2, RS integrated with MOSS and have a number of reports deployed to a Reports Library in MOSS. 3 out of 10 times I run a report I get a error message stating that 'An internal error occured on the report server.' Just hitting Apply on the parameter panel will fix the problem and render the report as expected.
Previous entries to the forum about this error hints at an error that supposedly was fixed in SP2; since I'm running SP2 something else must be the problem.
Any insight to what might cause the problem ?
Regards,
Trond
Relevant content from the RS error log included below:
04/26/07 11:42:21, ERROR , SQLDUMPER_UNKNOWN_APP.EXE, AdjustTokenPrivileges () failed (00000514)
04/26/07 11:42:21, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied
04/26/07 11:42:21, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 7008
04/26/07 11:42:21, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 0
04/26/07 11:42:21, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x0
04/26/07 11:42:21, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x0
04/26/07 11:42:21, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x47405860
04/26/07 11:42:21, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL>
04/26/07 11:42:21, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x00000000
04/26/07 11:42:21, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x00000000
04/26/07 11:42:21, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL>
04/26/07 11:42:21, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL>
04/26/07 11:42:21, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL>
04/26/07 11:42:21, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 11 not used
04/26/07 11:42:21, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 15 not used
04/26/07 11:42:23, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used
04/26/07 11:42:23, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesSQLDmpr0147.mdmp
04/26/07 11:42:23, ACTION, w3wp.exe, Watson Invoke: No
w3wp!processing!1!4/26/2007-11:42:21:: a ASSERT: Assertion failed! Call stack:
Microsoft.ReportingServices.ReportProcessing.ReportProcessing.UpdateTimingInformation(RunningJobContext jobContext, Int64 totalDurationMs, Int64 reportDataRetrievalDurationMs, Int64 reportRenderingDurationMs)
Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(IRenderingExtension renderer, DateTime executionTimeStamp, GetReportChunk getCompiledDefinitionCallback, ProcessingContext pc, RenderingContext rc, CreateReportChunk cacheDataCallback, Boolean& dataCached)
Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(DateTime executionTimeStamp, GetReportChunk getCompiledDefinitionCallback, ProcessingContext pc, RenderingContext rc)
Microsoft.ReportingServices.Library.RSService.RenderAsLive(CatalogItemContext reportContext, ItemProperties properties, ParameterInfoCollection effectiveParameters, Guid reportId, ClientRequest session, String description, ReportSnapshot intermediateSnapshot, DataSourceInfoCollection thisReportDataSources, Boolean cachingRequested, Boolean isLinkedReport, Warning[]& warnings, ReportSnapshot& resultSnapshotData, DateTime& executionDateTime, RuntimeDataSourceInfoCollection& alldataSources, UserProfileState& usedUserProfile)
Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters)
Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames)
Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute()
Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames)
Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.ProcessRequest(HttpContext context)
System.Web.HttpApplication+CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
System.Web.HttpApplication.ResumeSteps(Exception error)
System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
System.Web.HttpRuntime.ProcessRequestNoDemand(HttpWorkerRequest wr)
System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)
w3wp!library!1!4/26/2007-11:42:21:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., un-named assertion fired for component processing;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details.
Hi all,
We're currently having a great deal of difficulty getting our MOSS/SSRS integration configured. In short, we're getting "A connection to the computer cannot be established." message in the Grant Database Access page of the Reporting Services Integration settings.
A few more points:
We have two servers:
Server A: Win2K3 EE SP2, MOSS 2007, SSRS Integration Components
Server B: Win2K3 EE SP2, SQL Server 2005 SP2, MOSS database, SSRS, WSS 3.0, SSRS Integration Components
A user in IE on Server A can successfully browse to the ReportServer virtual directory on Server B.
Another "test" MOSS server has been configured separately and successfully against Server B, so it seems like there's something amiss with Server A. The report server configuation tool shows all green. There are no entries in the App or System log that appear related to this issue. We've looked at KB's 871179 and 896861; no luck there.
We've tried both Windows Authentication and Trusted Connection with a number of different accounts, including a domain admin. No luck.
The error is really irritating, considering it gives no additional information, logging, or context.
Can anyone shed some additional light here?
Thanks,
Dave
Hi,
is possible to integrate SQL Server Express with SharePoint or it's possibile to integrate only the SQL Server 2005 version?
Thank's
Hi!
I wonder where in Reporting Services Configuration
i can change the mode to Share Point Integrated?
Do i need to create a new database,
or can i change the mode for the one i use?
//C
Like many others, I am have trouble getting this to work, and none of the solutions I have found on the inter-tubes seems to work for me:
"An unexpected error occurred while connecting to the report server. Verify that the report server is available and configured for SharePoint integrated mode. --> The request failed with HTTP status 401: Unauthorized."
The Setup:
MOSS/SSRS (Integration Mode) running on a server farm on a single server: myserver.mydomain.org
Service Account for all Services: mydomainmyaccount (trusted for delegation, member of IIS_WPG)
myserver trusted for delegation
SSAS running under Local System on ssas.mydomain.org.
SETSPN -L mydomainmyaccount results:
HTTP/myserver.mydomain.org
HTTP/myserver
MOSS Authentication Settings
Authentication Type = Windows
Default Authentication Provider = Negotiate (Kerberos)
Anonymous access not enabled
IIS Settings
SSRS on Default Web Site: Port 8080
Application Pool Identity mydomainmyaccount
NTAuthenticationProviders="Negotiate,NTLM"
Security: Windows Authentication
MOSS on Sharepoint-80 Site: Port 80
Application Pool Identity mydomainmyaccount
NTAuthenticationProviders="Negotiate,NTLM"
Security: Basic Authentication except _vti_bin/ReportServer is Windows Authentication
The idea is to use kerberos to pass credentials from SSRS reports running on myserver.mydomain.org to SSAS on ssas.mydomain.org.
Hi ,
I am trying to deploy reports through visual studio. In the Target server URL, specified the url of the report server as http://<localhost>:<portnumber>/reportserver/Shared Documents/. But
When i deploy it asks for username and password. when i provide them, again login screen appears. Finally deployment fails when i press cancel.
Did anybody face this kind of problem ?
Thanks & Regards,
Kiran Kumar
Hi,
I have an installation with Reporting Services in integrated mode with WSS 3.0, with Reporting Services Add-in for SharePoint.
I have a document library in witch I added a data source to an SSAS database and a Report model on top of this. When I click Add a Report with Report Builder, the report builder opens, but it fails to connect to the model.
There is a dialog window "Select Site or Server "asking for a URL. I put in there http://localhost, but is not working. I am not able to connect to the report model.
I will appreciate any help on what could be the reason or how can I investigate this.
Thanks,
Dan
P.S.
I did the same scenario on the development environment it works from start, without any problems. But now on production €¦.
Up until an hour ago, I was using the Sql Server Reporting Services Report Viewer webpart in Sharepoint with forms authentication, and was not having an issue. The only thing that I did (or remember doing) before things went sour was upload a new report to the document list and since then whenever I try to access a report, manage the data source on a report, change the report URL in the webpart, I get the following message:
An unexpected error occurred while connecting to the report server. Verify that the report server is available and configured for SharePoint integrated mode. --> The request failed with the error message:
--
<html><head><title>Object moved</title></head><body>
<h2>Object moved to <a href="/_layouts/login.aspx?ReturnUrl=%2f_vti_bin%2fReportServer%2fReportService2006.asmx">here</a>.</h2>
</body></html>
--.
I found some related posts and have tried the following, but none have helped:
Removed all reports and reuploaded only the one that was definitely working.
I changed the application pool for the report server to be the same app pool as Sharepoint (runs under domain admin account).
I changed the application pool for the report server back to it's original (which the Reporting Services Configuration prefers - was running under Network Service acct before the problem started, now running under domain admin acct)
I can browse to http://server/reportserver.
I'm running under forms authentication, which had been working.
I can access the three configs for Reporting Services under Application Management in Central Admin - I've tried changing the settings.
I can access http://server/_vti_bin/reportserver/reportservice2006.asmx as well as http://server/_vti_bin/reportserver/reportserviceauthentication.asmx (that was suggested in one post)
I've restarted IIS numerous times, and also finally rebooted the server.
I've created a new document list and set it for report content, just like the other list.
I also just noticed that even though I've set up my admin account as a site collection administrator, I now no longer see my report options under the New button in the document library (both the old and new). I don't know if this is related.
I'm sure that this is a case of something minor that I did that I forgot about. Any suggestions or other troubleshooting that I can do?
Thanks!
daw
I am trying to run a Reporting services report and pass a parameter using url access and SP Integrated mode.
I have managed to come up with the following: http://DashBrdRptSite/reportserver?http://npvmdashbrd1:2764/Reports/dashbrdrptstore/real%20time%20running/test.rdl&rs:Command=Render&Year=2006&Year=2007&Month=1
This works perfect as long as I run it from the actual server that has Sharepoint and reporting services installed.
If I try to run it from my desktop, I get prompted for a user name and password. And now matter how many times I enter my user/pass... it does not work.
If I just run the sharepoint link that appears on the report when I run it from within sharepoint... such as
http://npvmdashbrd1:2764/Reports/DashBrdRptStore/_layouts/ReportServer/RSViewerPage.aspx?RelativeReportUrl=%2fReports%2fDashBrdRptStore%2fReal+Time+Running%2ftest.rdl&Source=http%3a%2f%2fnpvmdashbrd1%3a2764%2fReports%2fDashBrdRptStore%2fReal%2520Time%2520Running%2fForms%2fAllItems.aspx&DefaultItemOpen=0
That runs no problem no matter where I run it from (my desktop or the Sharepoint Server), but it looks like I cannot pass it parameters. I guess becuase it is useing RSViewerPage.aspx.
Can someone please help me out?
Thanks
Hi All,
I am having multiple URL in multiple zones for my site.I am not able to view SSRS reports on Internet which is in Internet zone where as i can view the same reports on Intranet site having URL in default zone.
I m getting the following Error while accessing reports over internet:
" Unable to connect to the remote server.No connection to be made because target machine actively refused."
It would be great help if any one can solve this problem.
Thanks in Advance.
I have a masterpage that has no doctype, because I want to have a table with some fixed height TDs and some variable height TDs (this kind of table only seems to be possible in quirks mode, with no doctype). My problem is the SSRS web part, it has the web part title, but the actual report is not there! as soon as i put in the doctype, it renders normally.
Is there any way to have a reporting services web part render a report without a doctype?
hello
we have Reporting services and Office Sharepoint on the same server, but the reporting services website is on default website and won't start because MOSS is already using the port.
can i just change SSRS website port ?
thanks
Hi there,
I'm running MOSS 2007 in Integrated Mode, and I have a number of reports that are deployed to the Reports Library, and are working just fine when you go there and run them interactively.
Now however, I need to address the report via a URL, and pass it a parameter. Just to add a bit more pain, the report is in mdx, and expects an mdx parameter.
Here is the parameter "prm_cost_centre":
[DIM LEARNER AIM].[COST CENTRE DESC].&[Business]
Here is the URL of the report:
http://vmmoss:88/ReportsLibrary/Report1.rdl
(If you hit that URL as is, it runs fine, using the default parameter)
Now, I know that we have to escape the ampersand, so I'm thinking that this URL should do it.
http://vmmoss:88/ReportsLibrary/Report1.rdl&rs:Command=Render&prm_cost_centre=[DIM LEARNER AIM].[COST CENTRE DESC].%26[Business]
But it doesn't - It throws a 400 Bad Request error.
I know I must be very close, but I just can't work out what URL I need to pass in order to get the damn thing to run.
Any ideas?
I have a page with three Web parts;
1. Filter Web Part that uses a BDC-driven list of clients
2. Part showing RDL's from a doclib
3. Report viewer Web Part
I can use the Filter part to supply a parameter value to 3. when I select an RDL manually, I can set the Viewer connections to get the Report Definition from 2. But I can't get both options to work at the same time. The reports in 2. all have the same Parameter so there shouldn't really be a problem.
Looking forward to any suggestions or a way to provide feedback on the CTP (RS SharePoint Addin).
TIA.
Ed
I verified logs for reporting services integrated with SharePoint and I found many errors like this:
Cannot find site lookup info for request Uri [URL].
what is wrong with configuration?
I have a report in which the jump to URL always works in Preview mode in Visual Studio. However, when I publish it to Sharepoint the link does not seem to want to render.
Most of the time if the link is short like http://server.domain.com it works fine.
When I try ="http://servername/projectcontrols/reports/Pages/PhaseExpenditureBreakdown.aspx?Phase="&Fields!PhaseName.Value as the expression it never works in Sharepoint, but does work in Preview Mode.
If I try ="http://"&Fields!PhaseName.Value then it renders the URL in Sharepoint.
Is there some kind of size limit to the URL?
We have been successful in creating a custom Excel Renderer that works very well on a server configured for SSRS Native mode. However we have another server that is configured to work in SSRS integrated mode that we can not get this custom renderer to work properly. The steps we follow are:
After the report results are displayed we select Actions -> Export -> Excel Custom . So I can see the name of our custom rendering type.
After a very short amount of time (no more than a second or 2) I get a frame that says: an unexpected error has occurred. Here is the URL of the web site:
http://sharepointserver/sites/BI/Reports/Reserved.ReportViewerWebPart.axd?ReportSession=2jqe4e45sm0sze553avovv55&ControlID=5c4fbb59def64efdac050393cd3fb338&Culture=1033&UICulture=1033&ReportStack=1&OpType=Export&FileName=edi001&ContentDisposition=OnlyHtmlInline&Format=CUSTOM_RENDERER
Is there anything that has to be done differently to get a custom renderer to work in SharePoint integrated mode?
Note: here is the article we followed to initially create the renderer that will work in SSRS native mode:
http://msdn.microsoft.com/msdnmag/issues/05/02/CustomRenderers/
Any help would be appreciated, thanks.
I'm deploying a performance point site which includes several parameterized SSRS reports. Reporting services is configured to run in Sharepoint integrated mode.
I'd like to pass the parms to certain reports via URL posts when a user clicks on certain fields in a scorecard.
I can setup the basic URL to open a report, as follows:
http://okcrptdev003:81/sites/pps/PPS%20Reports%20Library/Production%20Control/Monthly%20Flash%20Report%20-%20Mgt%20Summary%20Oracle.rdl
When this URL is executed, the sharepoint site redirects with the following URL, which opens the report and prompts for a text date paramater (DatePrompt) in the format dd-mmm-yy (i.e. 01-Sep-07)
http://okcrptdev003:81/sites/pps/_layouts/ReportServer/RSViewerPage.aspx?RelativeReportUrl=/sites/pps/pps%20reports%20library/production%20control/monthly%20flash%20report%20-%20mgt%20summary%20oracle.rdl
I attempted to modify the original URL call to include the date parameter as follows:
http://okcrptdev003:81/sites/pps/PPS%20Reports%20Library/Production%20Control/Monthly%20Flash%20Report%20-%20Mgt%20Summary%20Oracle.rdl&rs:command=render&DatePrompt=01-Sep-07
This resulted in a page not found error.
I then modified the redirected URL to see if that would work:
http://okcrptdev003:81/sites/pps/_layouts/ReportServer/RSViewerPage.aspx?RelativeReportUrl=/sites/pps/pps%20reports%20library/production%20control/monthly%20flash%20report%20-%20mgt%20summary%20oracle.rdl&rs:command=render&DatePrompt=01-Sep-07
This will open the report, but it ignores the parameter and continues to prompt for the date.
Does anyone have any suggestions?
Thanks, mike
I'm using VS 2005, and I built a website with a TableAdapter method using the wizard.I hand wrote a line of code: 1 WITH srtAS
2 (
3 SELECT *,
4 ROW_NUMBER() OVER (ORDER BY date DESC) AS 'RowNumber'
5 FROM table1
6 )
7 SELECT *
8 FROM srt
9 WHERE RowNumber BETWEEN @start AND @end; I didn't find any syntax errors, but the Wizard keeps alerting "the over sql construct or statement is not supported." From my research, I found that it's caused by the Wizard that doesnt support some syntax. Afterall, the problem is:1. I have two parameters @start AND @end. normally if there is no "syntax error", then it will show in the TableAdapter: GetData(@Start,@end). But now since there is this "Syntax error", I won't load these two parameters.2. I saw some solutions to this "syntax error" problem, and they suggested to write query manually, don't use wizard. But I don't know how. thanks in advance-noPC-
We have started to use reporting services in integrated mode with windows sharepoint. Since this installation the drillthrough reports have stopped working. We get the following error when a hyperlink is cllicked:-
The item 'http://vtrends/reports/IslandRegionCountryState' cannot be found. (rsItemNotFound)
In the textbox properties we have set the 'Jump to Report' hyperlink option to use a condition. Based on the link clicked, one of two reports will be displayed. If i remove this condition and manually select the report to run then there are no problems. This however is not the functionality that is needed.
Any help will be appreciated.