Not Working With Different Databases
Dec 26, 2007
Dear Experts,
i've read a good article by greg larsen in sql server performance.com site.
the article name is :Measure TSQL Statement Performance
here is the query
SELECT creation_time
,last_execution_time
,total_physical_reads
,total_logical_reads
,total_logical_writes
, execution_count
, total_worker_time
, total_elapsed_time
, total_elapsed_time / execution_count avg_elapsed_time
,SUBSTRING(st.text, (qs.statement_start_offset/2) + 1,
((CASE statement_end_offset
WHEN -1 THEN DATALENGTH(st.text)
ELSE qs.statement_end_offset END
- qs.statement_start_offset)/2) + 1) AS statement_text
FROM sys.dm_exec_query_stats AS qs
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) st
ORDER BY total_elapsed_time / execution_count DESC;
with this query, i got the worest running queries. in the same server, i've tried with different databases, but it is giving error
error is :
Msg 102, Level 15, State 1, Line 17
Incorrect syntax near '.'
what is the problem? i'm using this version.
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition on Windows NT 5.0 (Build 2195: Service Pack 4)
please help me in this regard
Vinod
Even you learn 1%, Learn it with 100% confidence.
View 5 Replies
ADVERTISEMENT
Jan 24, 2006
I just restored my SQL server 2000 database on the SQL server 2005. after this i ran the Service broker sample ("Hello World") on this database by changing the AdventureWorks name to the new database name. The "setup.sql" runs fine. When i run the "SendMessage.sql" i was not getting any rows in the output (The message was not getting inserted into the queue). I checked the Service broker is enabled on this databased using the query "select is_broker_enabled from sys.databases where name = 'newdbname' " It was 1. I even tried the ALTER DATABASE SET ENABLE_BROKER. but it didnt work.
When i tried the sample on a newly created database it worked fine.
Is there any solution to make the restored database to work for service broker.
Thanks
Prashanth
View 3 Replies
View Related
Apr 3, 2000
Does anyone out there work with databases created using sp_create_removable?
I am encountering a situation that is a difference between 6.5 and 7.0 handling of these types of databases. In 6.5, our product creates a removable database on a fixed hard drive. When the user is ready to move the database to a jazz or zip drive, we set the database readonly and remove the log file. No problems. We can use sp_dbinstall witout a log file and everything works just fine.
In 7.0 we do the same thing, however, when we attach the database via sp_attach_db (which replaced sp_dbinstall), SQL Server 7 creates a new log file.
Is there any way to make SQL Server NOT re-create this log file?
View 1 Replies
View Related
Mar 3, 2006
hi
I had a view in which I did something like this
isnull(fld,val) as 'alias'
when I assign a value to this in the client (vb 6.0) it works ok in sql2000 but fails in 2005.
When I change the query to fld as 'alias' then it works ok in sql 2005 .
why ?? I still have sql 2000 (8.0) compatability.
Also some queries which are pretty badly written run on sql 2000 but dont run at all in sql 2005 ???
any clues or answers ?? it is some configuration issue ?
Thanks in advance.
View 5 Replies
View Related
Dec 10, 2007
Dear Readers,Is it possible, like in Access, to link to tables in other SQL databases that are on the same server? I have a query that I originally had in Access that queered from multiply databases. It did this by having those other tables in the other databases linked to the database that had the query.
View 3 Replies
View Related
Jan 7, 2004
I am writing a pgm that attaches to a SQL Server database. I have an Add stored procedure and an Update stored procedure. The two are almost identical, except for a couple parameters. However, the Add function works and the Update does not. Can anyone see why? I can't seem to find what the problem is...
This was my test:
Dim cmd As New SqlCommand("pContact_Update", cn)
'Dim cmd As New SqlCommand("pContact_Add", cn)
Try
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add("@UserId", SqlDbType.VarChar).Value = UserId
cmd.Parameters.Add("@FirstName", SqlDbType.VarChar).Value = TextBox1.Text
[...etc more parameters...]
cmd.Parameters.Add("@Id", SqlDbType.VarChar).Value = ContactId
cn.Open()
cmd.ExecuteNonQuery()
Label1.Text = "done"
cn.Close()
Catch ex As Exception
Label1.Text = ex.Message
End Try
When I use the Add procedure, a record is added correctly and I receive the "done" message. When I use the Update procedure, the record is not updated, but I still receive the "done" message.
I have looked at the stored procedures and the syntax is correct according to SQL Server.
Please I would appreciate any advice...
View 2 Replies
View Related
Feb 8, 2000
hi from France !!!
i would like how to duplicate a database to another server with all datas, constraints, keys, indexes...
should i use sp_attach_db, dts, backup/restore, sql scripts... ???
thanks to all, nico
View 1 Replies
View Related
Mar 13, 2007
This is the scenario. Is it possible to create views or something (like Oracle DB Links) in a database in Instance 1 which can show data from another database in 2nd Instance ?
I want to do this to create reports.
View 2 Replies
View Related
Feb 23, 2008
Original suggestion for my problem was - Select * from TableA where ID not in ( Select ID from TableB)
When I run the query below using the IN operator I get 227 records returned but when I use NOT IN I get zero records when I expect well over 10,000. What am I missing?
using SQL 2000 server
SELECT LinksInfo.L_ID, LinksInfo.C_ID, Companies.C_CompanyName, Companies.C_Email, Companies.C_CompanyEmailFROM LinksInfo INNER JOIN Companies ON LinksInfo.C_ID = Companies.C_IDWHERE (LinksInfo.L_ID IN (SELECT ZL_ID FROM Location_Zip))
ZL_ID is not a primary key in Location_Zip
View 2 Replies
View Related
Mar 25, 2008
Hello again,
I think im missing something here, i just cant find out what it is.
I have a temp table:
CREATE TABLE #tempSearch(tempID BIGINT IDENTITY(1,1) PRIMARY KEY,username NVARCHAR(20) COLLATE Finnish_Swedish_CI_AS,lastlogin DATETIME,signupdate DATETIME)
Now i am trying to retrieve some data for each user that is inside this tempSearch list and have an id over xxx (xxx = the value of the parameter @first_id):
SELECT @sql = 'SELECT profile_publicinfo.username, profile_publicinfo.gender, profile_publicinfo.signupdate, profile_profilephoto.imageurl, profile_profilephoto.alttext, settings_username.color, profile_publicinfo.lastloginFROM #tempSearch INNER JOIN dbo.profile_publicinfo ON profile_publicinfo.username = #tempSearch.usernameINNER JOIN dbo.settings_privateinfo ON settings_privateinfo.username = profile_publicinfo.usernameFULL OUTER JOIN dbo.profile_coolfacts ON profile_coolfacts.username = profile_publicinfo.username FULL OUTER JOIN dbo.profile_profilephoto ON profile_profilephoto.username = profile_publicinfo.usernameFULL OUTER JOIN dbo.settings_username ON settings_username.username = profile_publicinfo.usernameWHERE (profile_publicinfo.username IN (SELECT username FROM #tempSearch))AND #tempSearch.tempID >= @first_id'
SELECT @paramlist = '@first_id int'EXEC sp_executesql @sql, @paramlist, @first_id
I need to get the tempID from the tempSearch table in order to compare it with @first_id
When i run this i get the same username repeated like 30 times then it moves over to the next, when i debug the #tempSearch it looks fine, just the users that are suppose to be there.
View 1 Replies
View Related
Jun 17, 2004
Hi
I think I have installed MSDE sucessfully. The new servie is running, but how can I test ifit is working? Can I place my files anywhere on the system?
All help appreciated
View 1 Replies
View Related
Apr 25, 2006
I am using the following C#...
SQLXMLBULKLOADLib.SQLXMLBulkLoad3Class loader = new SQLXMLBULKLOADLib.SQLXMLBulkLoad3Class();
loader.ConnectionString = "PROVIDER=SQLOLEDB; Server=(local); database=TestDB; user id=test; password=password";
loader.ErrorLogFile = "C:log.txt";
loader.SchemaGen = true;
loader.SGDropTables = true;
loader.CheckConstraints = true;
loader.Execute(
"C:xsd.xsd"/* this file below */,
"C:xml.xml"
);
To generate tables in the database using the following xml schema...
(file: xsd.xsd...)
My problems is that it doesn't generate the tables and I am following the SQLXML2.0 documentation as closely as possible.
Does anyone know what I have to do to get it to generate the tables? Running it doesn't even produce an error.
Cheers,
Matt.
View 1 Replies
View Related
May 3, 2002
OK so I'm using dynamic sql to enable me to have a variable for the order by, but now it's giving me the following error
Syntax error converting character string to smalldatetime data type.
Any help is very much appreciated
Code follows
CREATE PROCEDURE spBattingAve1
@cid datetime,
@cid1 datetime,
@sid nvarchar(10)
AS
DECLARE @query nvarchar(4000)
SET @query = 'SELECT MAX(t_batting.runs) AS BestRuns,
COUNT(t_batting.dnb) AS DidNotBat, t_player.surname, t_player.firstname,
t_batting.player_id,
Sum(t_batting.runs) as SumOfruns, COUNT (*) AS Games,
COUNT (t_batting.notout) as nout,
(Sum(runs)/(COUNT(*)-(COUNT(notout)+COUNT(dnb)))) as AverageRun,
(COUNT(*)-COUNT(dnb)) AS Innings,
(SELECT COUNT(*) FROM t_batting inner join t_game on t_batting.game_id = t_game.game_id WHERE (t_batting.player_id = t_player.player_id) AND runs >= 50 AND runs <100 and t_game.date >= '+@cid+' And t_game.date <= '+@cid1+' GROUP BY t_batting.player_id) AS Overfifty,
(SELECT COUNT(*) FROM t_batting inner join t_game on t_batting.game_id = t_game.game_id WHERE (t_batting.player_id = t_player.player_id) AND runs >= 100 and t_game.date >= '+@cid+' And t_game.date <= '+@cid1+' GROUP BY t_batting.player_id) AS Overton
FROM t_batting
INNER JOIN t_game ON t_batting.game_id = t_game.game_id
INNER JOIN t_player ON t_batting.player_id = t_player.player_id
WHERE t_batting.player_id = t_player.player_id
AND t_game.date >= '+@cid+' And t_game.date <= '+@cid1+'
GROUP BY t_batting.player_id, t_player.surname, t_player.firstname, t_player.player_id
HAVING (COUNT(*)-(COUNT(notout)+COUNT(dnb))) <> 0
order by '+@sid+'
DESC'
exec (@query)
View 1 Replies
View Related
Jun 21, 2001
In SQL 7.0, when i use the below query in query analyzer, I got an error message. why?
======================
Set Identity_insert on
UPDATE Table1
SET no = 3
WHERE no = 4
Set Identity_insert off
go
Error message
=============
Server: Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'on'.
Server: Msg 156, Level 15, State 1, Line 7
Incorrect syntax near the keyword 'off'.
View 2 Replies
View Related
May 1, 2006
Hi,
I am on a box with 4 GB of memory that only runs SQL Server. SQL Server is using 1.7 GB as per task manager. There are a lot of databases on this box. I looked at the boot.ini and /3GB was not set. I have done this at least 50 times before: turn on the /3GB switch and SQL Server will use up to 2.7 GB per task manager. (I know it is actually 2GB and 3GB but it seems that in task manager it shows up as 1.7-1.8 and 2.7-2.8)
Anyway back to the story. So I set /3GB, rebooted the server and SQL Server still only consumes up to 1.7GB. I realize that SQL Server might not actually need more memory, but I have a distinct feeling that it wants more but is being constrained; that is, the the /3GB switch is not working. More relevant information:
1) the boot.ini line:
multi(0)disk(0)rdisk(0)partition(1)WINNT="Microsoft Windows 2000 Advanced Server" /fastdetect /3GB
2) max server memory (MB) = 3000
3) min server memory (MB) = 3000
4) awe enabled = 0
5) @@version = 8.00.2039 which is SQL Server 2000 SP4
Has anyone seen this before? Any ideas on how to troubleshoot this?
View 1 Replies
View Related
Oct 16, 2006
Hi all:
Because me not this functioning the following one query.
simply me not the function respects min, because?, that I am doing badly?
Select Distinct(Min(c.gentime)),
a.CardNumber,a.CardHolderId,a.Deleted,
b.RecordId,b.FirstName,b.LastName,b.Deleted,b.Note 4,
c.param3,c.param2,c.param1,c.recvtime,c.gentime,c. link1,c.link2,c.link3,c.deleted,c.recordid,c.seqid
From Card a,
CardHolder b,
History c
Where ((a.cardholderid = b.recordid)And(b.recordid=c.link3))
And(a.Deleted = 0)And (b.Deleted = 0)And(c.deleted = 0)
And(a.cardnumber Between 1500 And 1600)
And(b.note4 <> 'Mantenimiento')
And(c.RecvTime >= CONVERT(DATETIME, '2006-10-01 00:00:00', 102))And(c.RecvTime <= CONVERT(DATETIME, '2006-10-12 23:59:59', 102))
And(c.Link1=10)
Group By a.CardNumber, a.CardHolderID, a.Deleted,
b.RecordID, b.Deleted, b.FirstName, b.LastName, b.Note4,
c.Deleted, c.RecvTime, c.GenTime, c.Param1, c.Param2, c.Param3, c.Link1, c.Link2, c.Link3, c.Link4,c.recordid,c.seqid
Order By a.CardNumber,c.recvtime
Thanks.:confused:
View 6 Replies
View Related
Mar 2, 2006
hi..why this SP is not working that giving me error like
Server: Msg 2714, Level 16, State 1, Procedure test_E, Line 12
There is already an object named '#emp' in the database.
my one of the developer used this every where... what should i do if i dont wanna to change any of the code...i wanna some how work this SP...
create proc test_E
as
select * into #emp
from (select * from emp) p
select * from #emp
drop table #emp
select * into #emp
from (select * from dept) p
select * from #emp
drop table #emp
T.I.A
Papillon
View 5 Replies
View Related
Apr 11, 2006
select replace(local_notes,char(13),' ') from locals
Not Working ......
View 12 Replies
View Related
Sep 20, 2006
declare @table table(ad_num varchar(20), ad_str1 varchar(20))
insert @table
select '20', '20 apple avenue' union all
select '20', 'apple avenue'
select * from @table
if (select * from @table where substring(ad_str1, 1, 1) like '[0-9]'))
print 'address starts with a number'
else
print 'address starts with a letter'
i want to write a code that prints a msg if the string starts with a number else print another msg.
View 20 Replies
View Related
Sep 26, 2007
In SQL2000 Enterprise manager, there is always an indication of WHICH server & database an object is opened from when it has focus.
So when I'm working on the same table in test and production servers I can tell at a glance what it belongs to.
I cannot seem to duplicate this in any way in SQL Manager 2005 Express which could lead to all sorts of trouble and really slows me down.
Have I missed something really simple in setup or use of the product?
TIA,
Richard
View 2 Replies
View Related
Nov 20, 2007
Dear All,
please explain me what is going inside with this query....
selectchar(94 * RAND() + 33)
i saw this in FAQ, combining several same queries to generate random passwords.
i didn't get what is char(94* rand()+33)
thank you very much for your valuble time
Vinod
Even you learn 1%, Learn it with 100% confidence.
View 10 Replies
View Related
Feb 28, 2008
Hi,
can i anybody help the below query for the o/p
function:date_format(getdate(),'mmm-yy') which will return FEB-08
when iam querying the below statement data is not getting fetching .can anybody correcy it??
select * from
Rev_fbp_posted_dim_tb_tmp2
where dbo.Date_Format(fb_voucher_date,'MMM-YY') between NOV-07' and 'DEC-07'
View 1 Replies
View Related
Mar 28, 2008
I would like to get the average of a field but I am not sure if I am doing it correctly.
SELECT dbo.VIEW2.Den AS Den2, CASE WHEN VIEW1.Den = VIEW2.Den THEN 1 ELSE 0 END AS Den3, dbo.VIEW2.ID, AVG(dbo.VIEW2.Den) AS Den4
FROM dbo.VIEW1 CROSS JOIN
dbo.VIEW2
WHERE (dbo.VIEW2.ID = '1')
Here is the error I am getting: Column dbo.View2.Den is invalid in the SELECT list because it is not an aggregate function and there is no Group BY CLause.
Thanks for the help
View 6 Replies
View Related
Jul 23, 2005
How can I verify that AWE is actually working? The server is SQL 2000EE on W2KAS with the /pae switch.I've allocated 5000Mb (5Gb) for SQL but Performance monitor says theworking set for the sqlservr process is only 91Mb (it started out ataround 87Mb a couple of days ago and seems to be creeping up)."committed bytes" for the server is about 5.6 Gb out of ~6Gb so there'sa whole pile of memory going somewhere.The error log says "Address Windowing Extensions enabled" (sp_configindicates a "1" for this as well). The "max server memory" item says5000 Mb for its "running" value so within the SQL Server things appearto be correct.The server does seem to be performing better but it's hard to decide ifthat's because of AWE or just the fact that it was rebooted (it hadn'tbeen in a while).- Martin
View 3 Replies
View Related
Jul 20, 2005
I've built an application that relies pretty heavily on XML to enableflexible creation of data entry forms and storage of the data enteredinto those forms. Currently, it stores data as an XML document in anntext field. This is great because it allows me a great deal offlexibility in creating fields. However, I need to implement searchingand sorting of that data and I don't know how to do this in an efficientmanner.Currently the data is stored in a format similar to this:<form><fieldname>fieldvalue</fieldname><listfieldname><items><item><label>displaytext</label><value>itemvalue</label></item></items></listfieldname></form>Is there any way to perform searches on data like this, i.e. to searchthe "fieldvalue" in <fieldname> or "itemvalue" in <value>?If there isn't a way to do this, I'm willing to re-structure thedatabast architecture, though the solution would still need to allow thesame kind of flexibility that the XML solution does.Any ideas?Thanks,Kelly
View 4 Replies
View Related
Apr 9, 2007
Hi all,
This is a question related to AWE settings. I am on windows 2003 ent version with SQL Server 2005 std version. I have configured SQL Server to use AWE and min memery as 22G and max as 26G (I have 32G in total as physical memory). I do see the message in log as "Windows Address ... Enabled", but when I am using performance monitor to view total memory in kb for SQL Server, it never starts at 22G (usually at 1G). And I doubt why? The account I am running SQL Server is an admin account, so it can definitely locked down the pages in memory. Also, I do think AWE is working somehow, after several hours in running, the total memory will up to 8, 9 or 11G. So, apparently, it is over 2G per process limitation. I still want to know.
1. Is my AWE setting working?
2. If not, how to fix that?
3. How to confirm how many memory is actaully using by SQL Server?
Thanks,
NIng
View 5 Replies
View Related
Apr 24, 2008
I have a source table in which one of column is numeric data type. I have to do a lookup for this column to a table column which is float data type. So I change this float data type to numeric by convert function. You when I execute the package, if I use data viewer I always see that look up column value is always null. Can any one give me some suggestion please?
Thanks...
View 4 Replies
View Related
Aug 7, 2006
TIA. Here is my situation: I have two tables that I need to find the perform an EXCEPT op on.
Table1: ToBeAddedCodes
CodeID - varchar(14)
Table2: ExistingCodes
ExistingCodeID - varchar(14)
DateIssued - datetime
Active - bit
...&c
I perform the following command, to no avail:
select CodeID
from ToBeAddedCodes
intersect
select ExistingCodeID
from ExistingCodes
Specifically, the following error appears:
Msg 156, Level 15, State 1, Line 40
Incorrect syntax near the keyword 'intersect'.
I don't understand what the issue is... Please help. Thanks.
View 11 Replies
View Related
Jul 15, 2006
Hello All, I am probably doing something small with my query that is causing me pain, but somehow the query is acting funky. What I am trying to do is do a search statement to find documents from a table. But the catch is it is taking three parameters. The searchString, Type and the Location (where the user who is searching belongs to). When I run my query I get all documents where the location and type is correct. But the searchstring does not even work.For example: Lets say I have 3 documents for a LocationID of '2' and the Type for all documents is '0'. Now imagine that the name of the documents as follow: Doc1 = a , Doc2 = b, Doc3 = c. So now a user wants to search for all docs that starts with 'a'. Remember, Loc ID = '2' and Type = '0'. The result of the query should be Doc1 and only Doc1. But somehow I am getting all three Docs b/c they belong and are the type of the give parameters. Any help would be greatfull. Query:
SELECT Client.FirstName, Client.LastName, Client.MiddleName, Client.LocID, ClientDocuments.DocID, ClientDocuments.DirName, ClientDocuments.LeafName, ClientDocuments.Type, ClientDocuments.CreatedByUser, ClientDocuments.CreatedDate FROM Client INNER JOIN ClientDocuments ON Client.ClientID = ClientDocuments.ClientID WHERE ClientDocuments.Type = '0' AND Client.LocID = '3' AND ([ClientDocuments.LeafName] LIKE '%' + @SR + '%' OR [Client.SSN] LIKE '%' + @SR + '%' OR [Client.LastName] LIKE '%' + @SR + '%' OR [Client.FirstName] LIKE '%' + @SR + '%' OR [Client.MiddleName] LIKE '%' + @SR + '%' )
View 5 Replies
View Related
Jul 31, 2006
I've gotten spoiled with all these query builders. Now in SQL server management studio express its gone. I don't understand whats wrong with their query....any help would be appreciated.
SELECT [Products].myID, [ProductDetails].ShortName
FROM [Products]
INNER JOIN [ProductDetails]
ON [Products].DetailID = [ProductDetails].myID
Parse comes back asCommand(s) completed successfully.
Execute comes back asMsg 208, Level 16, State 1, Line 1Invalid object name 'Products'.
View 2 Replies
View Related
Nov 6, 2006
Hi All,
I have this error:
"System.Data.SqlClient.SqlException: Cannot open user default database. Login failed."
It occurred when my application try to access the App_Data, because I use Profile to store user data. I can connect to SQL Server just fine, but failed to access the App_Data. How to change the SQLExpress (because I assume that App_Data store its data in SQLExpress) username and password within the application?
TIA
View 2 Replies
View Related
Dec 12, 2006
Are the sql sentences in mssql identical to mysql? Can someone please show me the easiest way, how to connect to database in asp.net, cause i have no idea how to do that? What do you recommend, should i use mysql or mssql?
View 1 Replies
View Related
Dec 27, 2006
I'm trying to use this WHERE Clause in a stored procedure, it is not working. I'm hoping someone can look at it and tell me if there is a better way or what might be causing it to fail.(CONVERT(varchar, tblTasks.ReminderDate, 101) BETWEEN CONVERT(varchar, GETDATE() - 7, 101) AND
CONVERT(varchar, GETDATE() + 7, 101))
View 1 Replies
View Related
