Numbering Rows In A Result Set
Nov 29, 2001
work_id Work_item_code
--------------------------------
3 Sup
14 100001
5 100002
16 100003
8 IWSM
9 ES3000
10 AppDev
11 100004
I want to have a counter on this select like
work_id Work_item_code counter
----------------------------------------
3 Sup 1
14 100001 2
5 100002 3
16 100003 4
8 IWSM 5
9 ES3000 6
10 AppDev 7
11 100004 8
I can use rownum in Oracle, what do I do to get this in SQL server ?
Thanks Sonali
View 2 Replies
ADVERTISEMENT
Nov 19, 2001
Hello all,
I'm trying to number rows in a resultset by a grouping.
e.g. if my data looks like this:
personname persondata
----------- -----------------
person1 data
person1 more data
person1 other data
person2 stuff
person2 more stuff
person2 even more stuff
person2 lots of stuff
person2 last bit of stuff
person3 info
person3 more info
I want it to return this, with x as a sub-numbered value (like an identity for each grouping):
x personname persondata
-- ----------- -----------------
1 person1 data
2 person1 more data
3 person1 other data
1 person2 stuff
2 person2 more stuff
3 person2 even more stuff
4 person2 lots of stuff
5 person2 last bit of stuff
1 person3 info
2 person3 more info
Any ideas?
Thanks,
Dan
View 2 Replies
View Related
Jul 20, 2005
OK,Here is my challenge.If I have a query that produces the followingItemSold_OnA01-10-2004 8:03A01-11-2004 10:05A01-12-20041:37A01-14-20047:16B01-10-20049:37B01-12-2004 11:42B01-13-20049:37But I need it to produce this insteadItemSold_On InstanceA01-10-2004 8:031A01-11-2004 10:052A01-12-20041:373A01-14-20047:164B01-10-20049:371B01-12-2004 11:422B01-13-20049:373So basically I need it to chronologically number the rows, but I needthe count to start over when the item changes.
View 3 Replies
View Related
Sep 1, 2005
How can I issue a SQL statement to assign incrementing numbers starting from a particular row. For e.g.,
col1 col2
----- -----
aaa 123
... 345
xxx 001
yyy 002
zzz 003
I would like to have numbering in col2 to start where col1=XXX to ZZZ.
Thank you
View 1 Replies
View Related
Sep 6, 2000
What is the easiest way to return rows 200 through to 300 of a 500 row result set using SQL? Is there a simple way of doing this or do I need to write some Transact SQL? Any ideas would be appreciated.
Thanks
Rod
View 4 Replies
View Related
Feb 12, 2014
I have two tables that I am pulling data from to insert into a third table.
Table 1:
Organization Address Date
Name 404 St. 12/31/1999
Table 2:
Organization Software Type Quantity
Name SW1 5
Name SW2 6
Name SW3 7
Name SW4 8
My query looks something like this:
INSERT INTO Organization SW Reqs (Name, Address, Date, SW1 Quantity, SW2 Quantity, SW3 Quantity)
SELECT Table 1.Name, Table 1.Address, Table 1.Date,
(Select Table 2.Quantity Where Table 2.Software Type = 'SW1'),
(Select Table 2.Quantity Where Table 2.Software Type = 'SW2'),
(Select Table 2.Quantity Where Table 2.Software Type = 'SW3')
FROM Table 1, Table 2
WHERE Table 1.Organization = Table 2. Organization
Sadly, this query gives me four rows, one for each Software Type. I have tried putting DISTINCT after my SELECT, but that narrows it down to two rows only. I would really like to have just a one row result per organization.
View 2 Replies
View Related
Jun 20, 2007
In the thread http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1071904&SiteID=1 mike.groh stated that you would define the result set as a data set variable through an execute sql task. He then pushed the variable out as a dataset type. (ds = CType(Dts.Variables("Email_CurrentDataset").Value, DataSet)
How would this type of object be declared as a user variable? Is it of type object? What is the logic behind converting a result set to a data set?
Specifically I am having problems with converting / casting the result set to a data set in that I am getting an error stating that it cannot convert the com object to a data.dataset class...
Imports ADODB
Imports System
Imports System.Xml
Imports System.Collections
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.SqlServer.Dts
Imports Microsoft.SqlServer.Dts.DtsClient
Public Class ScriptMain
Public Sub Main()
Dim ds As DataSet
Dim dr As DataRow
Dim str As String
Dim dtm As String
Dim s As String
Try
ds = CType(Dts.Variables("resultSet").Value, DataSet) ' <-- Error on converting
Dts.TaskResult = Dts.Results.Success
Catch ex As Exception
Dts.TaskResult = Dts.Results.Failure
End Try
View 1 Replies
View Related
Jun 13, 2006
Can we select "last 10 rows" from the result set. (sql server 2000)
Something of an opposite of "top" functionality
View 3 Replies
View Related
Aug 20, 2007
In Sql Server 2005 Express I have this table:CREATE TABLE [dbo].[Sections](
[SectionID] [int] NOT NULL,
[DocumentNo] [smallint] NULL,
[SequenceNo] [smallint] NULL,
[SectionNo] [smallint] NULL,
[DocumentTypeID] [smallint] NULL,
[SectionText] [ntext] NULL)
Each paragraph of text (SectionText) is in its own row
(SectionNo) Each primary document has a DocumentTypeID of 1 with
three subdocument types (2=Index, 3=Background, 4=Report).I run this query and return a collection of single rows from various documents grouped together by DocumentNo: SELECT *
FROM Sections
WHERE CONTAINS (SectionText, 'exercise')
ORDER BY DocumentNo
For each row that contains the search term, I would like to
return the full document (all rows as parapraphs within one row of
returned data). In other words, I want to reconstitute the full
document as it existed prior to being inserted into the database with
paragraph separation. For exampe, if the search term is in row 3
of DocumentNo=5, DocumentTypeID=2, I want to return all the rows of
that document in one block of text that retains paragraph format
(preferablly with a line break and carriage return between
paragraphs). How can this be done?
View 2 Replies
View Related
Sep 1, 2004
My site have a complicated search, the search give the results in two stages- the first one giving the number of results in each section:
"In the forums there is X results for the word X
In the articles there is X results...."
And when the user click one of those lines, the list shows the specific results in that section.
My problem is that I don't know how to calculate the first part, for now I use dataset, and table.rows.count to show the number of results in each section. Since my site have more then ten, it looks like a great waste to fill such large dataset (in some words it can be thousands of rows in each section) only for getting the number of rows…
Are there is a sql procedure or key word that will give me only the number of results (the number of times that specific word showing in the columns?)
Great thanks
View 1 Replies
View Related
Sep 20, 2001
Hello!
I have two similar servers (hardware) with
SQL Server 2000 (SP1) on Win2000 (SP2).
(sp_helpsort - default)
When I run the same SELECT statement from Query Analyzer on each machine
I get different rows order in result Grid
(the order of rows stays the same for each machine but different for
machine1 and machine2)
SELECT table1.a,
table1.b,
table1.c,
table1.d
FROM table2,
table1,
table3
WHERE table2.nTestDefnId = 1034
AND table2.nDefnId = table1.nDefnId
AND table3.szClinDiscType = 'X'
AND table2.nDiscId = table3.nDiscId
What is a reason for such behavior and how I can fix it?
Thank you in advance,
Elena.
View 1 Replies
View Related
May 19, 2014
How to get the result set:
AwardNumber AwardDt AwardType_RSS AwardQty_RSS
A1 01/01/2004 RSS 100
QUERY:
create table structure(
AWARDNUMBER VARCHAR(10),
AWARDDT DATEtime,
AWARDTYPE CHAR(3),
QTYAWARDED DECIMAL(20,6)
)
insert into structure
select 'A1','1/1/2004',null,null
union all
select null,null,'RSS',100
current output:
AWARDNUMBERAWARDDT AWARDTYPEQTYAWARDED
NULL NULL RSS 100.000000
A1 2004-01-01 00:00:00.000 NULL NULL
View 1 Replies
View Related
May 26, 2008
Hi,
for example i need to update table with top 5callers who called the most to one number:
With subselect i get results:
Number Caller Times
555-11111 555-11112 10
555-11111 555-11113 9
555-11111 555-11114 8
555-11111 555-11115 7
555-11111 555-11116 6
And now i need update table and get this results:
Number Top1Caller Top1Caller Top1Caller Top1Caller Top1Caller
555-11111 555-11112 555-11113 555-11114 555-11115 555-11116
And i need to do this with every number in database
View 1 Replies
View Related
Apr 30, 2008
Hi I have a 'settings' table similar to:
* Setting_ID
* SettingGroup
* SettingSubGroup
* SettingKey
* SettingValue
example data:
1, Comms, Com1, Speed, 9600
2, Comms, Com1, Parity, N
3, Comms, Com1, DataBits, 8
4, Comms, Com1, StopBits, 1
5, Comms, Com2, Speed, 2400
6, Comms, Com2, Parity, E
7, Comms, Com2, DataBits, 7
8, Comms, Com2, StopBits, 2
I want to have a query like
SELECT SettingKey, SettingValue FROM Settings WHERE SettingGroup='Comms' GROUP BY SettingSubGroup
where the result set has a single row for each distinct value of SettingGroup. I want the result set to look like:
SettingSubGroup, Speed, Parity, DataBits, StopBits <--column headings
----------------
Com1, 9600, N, 8, 1
Com2, 2400, E, 7, 2
I've had a look at the PIVOT command but it seems to require an aggregate function... is there a way to simply flip from rows to columns?
View 1 Replies
View Related
May 30, 2007
Working in Sql Server 2005,got 3 different table.Need to fetch the list of persons.A person can belong to different categories.When i am using inner join
on tables i am getting the duplicate rows because a perosn can belong to different categories.I want that there should be only onoe
row for the person and the different categories he belongs to can come up in single field as comma sepatated string
Now the results are like this:
firstname lastname adress category
abc xyz aaa a
abc xyz aaa b
abc xyz aaa c
I want like below:
abc xyz aaa a,b,c
I am thinking of using cursors in the stored procedure.Can you provide me the solution of this including the stored procedure..
View 7 Replies
View Related
May 20, 2008
In MySQL we use "SELECT (....) LIMIT 0, 10" to only return the first 0 to 10 records. Alternatively we could do "LIMIT 10, 20" to return the 10th to 20th records.
What's the equivilent of this in SQL Server?
Thanks
View 4 Replies
View Related
May 7, 2012
I am using SLQ Server 2008 R2. The database was designed by another company.
I have two tables: Client and Client_Location. In the Client table the pk is Client_ID. There is also a unique key: sys_Client_ID. Both the Client_ID and the sys_Client_ID fields exist as a foreign keys in the Client_Location table. However, the fields are not noted as unique in the Client_Location table. There are two fields in the Client_Location table that determine when the address was effective. They are from_dt and end_dt.
Multiple records have been loaded into the Client_Location table to track old as well as current addresses of clients.
I'm trying to run a report that will pull clients with a plan_id constraint from the Client table and join the Client_Location table to retrieve the current address of these clients.
My SQL is:
select distinct (a.client_id), a.cli_last AS Last_Name,
a.cli_first AS First_Name, a.cli_middle AS Mid_Init,
b.city AS City, b.county AS County, b.state AS State
from ECBH.dbo.tbl_Client a inner join ECBH.dbo.tbl_Client_Location b
on a.client_id = b.client_id
inner join ECBH.dbo.tbl_client_insurance c
on a.client_id = c.client_id
inner join ECBH_TEST.dbo.tbl_GEF_County d
on b.county = d.COUNTY_NAME
where c.plan_id = 4
order by a.cli_last, a.cli_first
Because multiple records exist in the Client_Location table, the result set has duplicates. How can I pull only the results where the from_dt is most recent?
View 5 Replies
View Related
Jun 26, 2014
I am trying to run queries on a table (table has zero rows). Inspite of giving 0 rows returned the query keeps on running and I have to cancel it. I tried inserting a dummy row into the table but even the insert operation is taking too long.Every query which I hit on the table just keeps on running without giving any result.
But this is not the case with other tables in the database.They are all running fine giving proper results. But this one table is behaving funny.
View 3 Replies
View Related
Sep 19, 2007
Hi again,
I'd appreciate advice on the following. Thanks very much!
Given this Table:
family|product|type
fam1 |abc |XX
fam1 |def |YY
What query would return this?
Family|Type1|Type2
fam1 |xx |yy
--PhB
View 8 Replies
View Related
Sep 23, 1999
How to get result from Query by group of (n) rows ?
- Is cursors the better way (and the only) ?
-Is there something as ROWNUM in Oracle or LIMIT in MySql ?
Example plz !
Thanks.
Alex
View 3 Replies
View Related
May 13, 2014
I am interested in changing the way that data is displayed in my result set.Essentially I want to display a selection of rows (1 to n) as columns, the following diagram explains my intentions.Perhaps one of the greatest challenges here is the fact that I do not have a concrete number of rows (or BIN numbers). Each stock item could be stored in one or more BINS, which I will not know until running my query.
View 2 Replies
View Related
Jan 22, 2014
I worked with someone else to create a query that gives us the age of a stock. How long it has been in the warehouse since the Purchase order date (without completely selling out). It does exactly what I want, the problem is that it only accepts 1 row as a result.
The error message I get is:
quote:Msg 512, Level 16, State 1, Line 4
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
So my question is; can this code be modified to pass it multiple SKUS and run a report on every item currently in stock?
SELECT TOP 1
@skuVar, CAST(GETDATE()-ReceivedOn AS INT) AS 'Age'
FROM
(SELECT pir.id AS id,aggregateQty AS aggregateQty,-qtyreceived as qtyreceived, (aggregateQty - qtyreceived) AS Diff, ReceivedOn AS ReceivedOn
,(
SELECT SUM (PurchaseItemReceive.qtyreceived)
FROM bvc_product pp
[code].....
I use Microsoft SQL 2008
View 1 Replies
View Related
Dec 18, 2007
Hello
I have a report that retrieves its data from Analysis Services. The data includes a count and dollar value of projects against their current status: It looks something similar to
(group1) status1 10 $200,000
(detail) p1 1 $5,000
p2 1 $10,000
.
.
p10 1 $20,000
(group1) status3 5 $90,000
(detail) .
.
(group1) status4 15 $150,000
(detail) .
.
In the report I hide the detail rows. I have a fixed/known number of statuses (in this case 4) and need to show all 4 in the report. eg
(group1) status1 10 $200,000
(detail) p1 1 $5,000
p2 1 $10,000
.
.
p10 1 $20,000
(group1)status2 0 $0
(group1) status3 5 $90,000
(detail) .
.
(group1) status4 15 $150,000
(detail) .
.
ie in this case I need to show status 2 (that doesn't exist in the data set) with zero totals.
Does anyone know if this is possible to get SSRS to display each of the status groups (in a known fixed list) and then match them to the records in the dataset.
As an alternative, if I were using SQL Server I could add rows to the dataset using a union statement. Is there similar functionality using mdx? My mdx skills are very basic.
Thanks
Stewart
View 1 Replies
View Related
Jul 12, 2015
I am trying to compare Sales value of year 2015 with sales value of 2016 and the difference stored in alias column as Sales_growth for year 2016 , for year 2015 the alias column be as '1' similarly difference between margin of 2015 and 2016 and result stored in alias column as margin_rate in year 2016for 2015 as 1 but when there is no record for year 2015 and record present in 2016 for a given (month, SM,SG,CUST,SP) then the alias column sales_growth and margin_rate should be 100
Formula for calculation
SGR = (sales(2015)-sales (2016)) / Sales_growth(2015)
SGR = (3456.05-3603.33) /3456.05 = -0.043
MR =( margin (2015)-margin( 2016) / margin(2015)
MR = (1059.24-1053.07)/1059.24= 0.006
DECLARE @T1 TABLE
[code]....
last record : as there is no record for year 2015 and record present in 2016 for a given (month, SM,SG,CUST,SP) then the alias column sales_growth and margin_rate should be 100
View 18 Replies
View Related
Dec 3, 2015
I have 3 tables:
TABLE [dbo].[Tbl_Products](
[Product_ID] [int] IDENTITY(1,1) NOT NULL,
[Product_Name] [nvarchar](50) NOT NULL,
[Catagory_ID] [int] NOT NULL,
[Entry_Date] [date] NOT NULL,
[Code] ....
I am using this query to get ( Product name from tbl_products , Buy Price - Total Price- Total Quantity from Tbl_Details )
But am getting a multiple result if the order purchase has more than 1 item :
SELECT DISTINCT B.Product_Name,A.AllPieceBoxes,
A.BuyPrice,A.TotalPrice,A.BuyPrice
FROM
Tbl_Products B INNER JOIN Tbl_PurchaseHeader C
ON C.ProductId=B.Product_ID INNER JOIN Tbl_PurchaseDetails A
ON A.PurchaseOrder=C.purchaseOrder
WHERE A.PurchaseOrder=3
View 5 Replies
View Related
May 30, 2008
Hello,
I am having trouble getting the results I am looking for from this query:
select ROW_NUMBER() OVER(PARTITION BY TransTime, DriverNo ORDER BY TransTime) as CustCount
, ROW_NUMBER() OVER(PARTITION BY Left(ToName,2), TransTime, DriverNo ORDER BY TransTime) As DelCount
, DriverNo
, Convert(VarChar(8), TransTime, 108) As TransTime
, Left(ToName,2) As AirPortCode
from transactions
The results I am trying to get would be like this:
CustCount DelCount DriverNo TransTime AirPortCode
-------------------- -------------------- -------- --------- -----------
1 1 042000 04:00:00 NW
1 2 042000 04:00:00 NW
1 1 042000 06:51:00 AA
1 1 042000 08:45:00 NW
1 1 042000 08:52:00 NW
1 1 042000 10:30:00 NW
1 1 042000 10:45:00 NW
2 1 042000 10:45:00 AA
1 1 042000 11:30:00 NW
1 2 042000 11:30:00 NW
But the closest I have gotten is:
CustCount DelCount DriverNo TransTime AirPortCode
-------------------- -------------------- -------- --------- -----------
1 1 042000 04:00:00 NW
2 2 042000 04:00:00 NW
1 1 042000 06:51:00 AA
1 1 042000 08:45:00 NW
1 1 042000 08:52:00 NW
1 1 042000 10:30:00 NW
1 1 042000 10:45:00 NW
2 1 042000 10:45:00 AA
1 1 042000 11:30:00 NW
2 2 042000 11:30:00 NW
The CustCount field should read 1 if there is only one unique AirPortCode during the TransTime with the specific DriverNo, but the query is counting both rows during that transtime. Any ideas?
Thanks.
View 9 Replies
View Related
Oct 5, 2005
Hi guys,
I have a table with 3 col like below
col1 col2 col3
LastName FirstName Address City
Nilsen Fred Kirkegt 56 Stavanger
Rasmussen Nina Storgt 67
none of them are unique, some are null and there are about 800,000 rows
I want to insert a col before 1 or after 3 and have numbering from 1 to the last row. How can I do that?
Thank you
Mina
View 5 Replies
View Related
May 19, 2006
I have table with 10-20 rows with field P6 which is empty. I want toupdate numbers to P6 starting 1 and increasing by 1. I suppose it isdone by triggers but I don't know how to do that. Help :-)
View 7 Replies
View Related
Sep 20, 2007
Good Day everyone...
I created a simple report for getting the top selling items of a store. I am getting the report well but my team mate requested to include a number at the first column that will hold the ranking of the item. Is there a function for including a rowrank or someway that i can add a column to my query that will provide the rowrank. Please show me how... c",)
thanks in advance guys...
View 4 Replies
View Related
Mar 31, 2006
Is It possible that, if there are 5 rows selected out, each row will automatically have the number from 1 to 5?
for example, after select query, results:
---------------------------------------
1Tom100
2May93
3Apple87
4Johnny72
5Noel67
View 2 Replies
View Related
Sep 19, 2007
Hi All,
I've upsized my database from access to SQL server, now im very new to SQL etc and i've been reding up on sqential numbering etc and my mind is buzzing with ideas. This is my problem.
I have a table and a colum called PIR ID this colum needs to start the numbering at 372 and increment by 1 each time. Now initially this was o.k by using identify. However it's a problem when 2 users open the form in access they are given the same number.
Now my though on this was to initially have a seperate table called new PIRID and hold the next bumber in there, so that a new number is taken from the list and entered into the record on save ( does that make sense) now the code i've got up to so far is that i've created the table and i get stuck from there.
Can anyone help me with the code of format of code i'm meant to be using, i'm under the understanding that to perform this funtion i may have to use a trigger of some sort.
Thanks In advance
Carol
View 1 Replies
View Related
Jul 23, 2005
Hello,For analyses and reporting I would like to add a 'ranking' to atable/view.Example:Using the 'order by desc' clause in query I get a list of Customersordered by Turnover (descending). I would like to add that rankingnumbers (same as recordnumbers) in the query. I would like to have thefollowing result:Cust_nr Cust_Name Turnover_2004 Ranking002234 Bayer 139.000 1003456 Rentokill 123.456 2001231 Air France 105.000 3etc.When the 'ranking' is part of the query/table I can use this ranking inan other query.Important: This questions is not about making an (empty) table structurefor filling in by an application and generating a new unique number eachtime a record is added.I hope you can help me.Thanks,Hans*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 2 Replies
View Related
Jul 20, 2005
Is there a quick way to number a query?ie I want to number the records returned by a recordset consecutively.This seems like it should be simple but I haven't figured out how to do ityet.Any help is appreciated!TIACarter
View 2 Replies
View Related
