Odbc Error - Record Has Been Changed By Another User
Oct 9, 2001
The following error is recieved when updating a record using access 97 and odbc driver to an oracle database.
This record has been changed by another user since you started editing it. If you save the record, you will overwrite the changes the other user made.
Any help is greatly appriciated.
Thanks in Advance
View 1 Replies
ADVERTISEMENT
Mar 3, 2005
I apologize in advance if this has been posted but if you get the attached error "The record has been changed by another user...", we've discovered that this error can occur if you have a SQL Server Data Type of "Float" and also a "Text" Data Type in the same table. We discovered that it only happens on some records though and I am not sure why this is so. The solution is apparently to add a TimeStamp Data Type to the SQL Server table which does seem to fix the problem. If anyone has any insight on any other solutions (we cannot change the Data Types) or the reasoning behind this error, I would greatly appreciate the feedback.
View 4 Replies
View Related
Jul 9, 2002
I am getting the following error while trying to update a SQL Server 7.0 table thru' MS Access('97 version). It was working fine until now. This problem started happening after re-linking the table to MS Access as new columns have been added on the SQL Server table. We tried re-starting the MS Access,re-linking the table again,giving all the permissions to the user on the table etc. Also, no other user is accessing the table at the same time..Any help?
Error message in MS Access:
This record has been changed by another user since you started editing it. If you save the record, you will overwrite the changes the other user made.
Copying the changes to the clipboard will let you look at the values the other user entered, and then paste your changes back in if you decide to make changes.
thanks,
Mike.
View 1 Replies
View Related
Dec 12, 2007
Can anyone give a quick description of the meaning of this message andwhat needs to be done to get a connection.I'm running DBArtisan with SQLServer 2000 client SP4 installed.I also get the same message with MS Enterprise Manager so this iscoming out of the actual ODBC connection attempt.Thanks in advance!
View 1 Replies
View Related
Apr 27, 2006
Hi,
I need help with a problem: When trying to process a analysis services project, I receive the following error message -
OLE DB error: OLE DB or ODBC error: Login failed for user 'NT AUTHORITYLOCAL SERVICE'.; 28000; Cannot open database "DocumentDB" requested by the login. The login failed.; 42000.
I am using the service account for impersonation for the datasource. One suggestion I received from the data-access forum was to grant privileges to the local service for the database. I am not clear about the procedure to do that. Can someone please guide me through this? I am posting this question in this forum since this is a authentication/privilege issue.
- Sanchet
View 6 Replies
View Related
Aug 14, 2001
Is there any method so that I can find that the particular user has changed the record in the particualr table..?
View 1 Replies
View Related
Feb 1, 2008
First of all, let me apoligize if this is a stupid question, but just a few days ago I decided to change my FE/BE database from Ms Access to SQL Server Express. Now I have a FE in ACC2002 and a BE in SQL SERVER (the two connected via ODBC). Anyway, this is my question:
When everything was in Access I had a form retreiving a series of records based on a filter - for understanding purpose let's say that a field must have been 'Not Null'. The operator then filled that field with data. With Access everything was static, and the operator could see all the records, the ones already changed and the ones not changed. With SQL now: everytime the operator fills in the field, the record changes to #Deleted. I assume that that is happening because the query - someway - is "alive" and is "filtering data alive"... or is updating records instantly. Just to make things more clear: is the record changed immediately so it is not considered part of the filtered data by the query, thus being change to #Deleted? What could I do to prevent this?
Thanks a lot for your help.
View 3 Replies
View Related
Apr 2, 2015
I need to find all items in an inventory table where a field has been unticked in the last 24 hours (there is no audit trail), as well as the contract number of the contract it has been added to (it will not have existed in that table before).
These are the two table querys in their basic form:
select item (nvarchar(20)), inactive (bit) from inventory
select item (nvarchar(20) , contract (nvarchar(20)) , original_start_rent (datetime) from deltickitem
I would like to see just the item number and the contract number it has been added to.
View 11 Replies
View Related
Apr 21, 2015
I have an online SQL Server database, and my web site registered clients can change the records of this database. My need: if a record of this database is changed, whole the changed record send to me and to the person who changed it immediately. I thought it could be possible through Transact-SQL,
View 2 Replies
View Related
Apr 23, 2015
I am programming an online game (such as chess) which two players can play together online.
Each one of the players should have installed the game application (developed by C#) on their computers.
When a player do some action, a record of a database (SQL Server 2012) which has been placed on the internet will be changed.
My need: when a record of this online database changes, whole the record send to both players' game application immediately.
View 3 Replies
View Related
Dec 4, 2005
Dear AllI have a problem ,as i created the new user itspassword became changed.I logon SQL Server as[color=blue][color=green]>> Server Name: localhost>> Server option : window athentication[/color][/color]then i created a new user[color=blue][color=green]>>user name = test>>password = 123[/color][/color]then,i refreshes the serveras i click on the test userits password become too long as ************what is the reason
View 1 Replies
View Related
Jul 30, 2014
I had a failover occur last night on my AlwaysOn AG, the SQL accounts had to have the passwords re-entered in order to connect to the databases?
1. I checked the SIDS, they match
2. both accounts have sysadmin rights, I know, I don't like it either but the apps will not run without it.
3. Only a few people have access to the SQL servers, right now, they all deny changing the password,
MCSA SQL Server 2012
View 8 Replies
View Related
May 12, 2015
I'm trying to execute backup job on secondary replica on clustered server(with HA) and I getting the error:execution failed see the maintenance plan and sql server agent job history logs for details.When I going to see the log, it says :configuration option 'user options' changed from 0 to 0.
View 3 Replies
View Related
Sep 26, 2004
Hello, all:
I am connecting to SQL Server 2000 with a trusted connection, and that is working fine. I then am issuing a SQLGetInfo call to find out the SQL_USER_NAME, which is always returning dbo instead of (my) Windows NT login name, which I expect to see. THe authentication is (apparently) confirmed by the SQL Server session monitor where it shows the right Windows NT user name logged in, over ODBC. With a standard SQL Login, untrusted, I definitely get the right user name back, not dbo.
So:
Login Type / user id /returned value from SQLGetInfo
Windows Authentication / Windows login / dbo
SQL Authentication / Windows login (UID) / UID
The problem is that I am trying to confirm that the userid entered in a dialog or passed on the command line to my application matches the actual connected user name inside SQL Server....
My questions:
Is there some pathology in Trusted_Connections that masks the Windows/NT login name and always returns UID 'dbo' from a call to SQLGetInfo? Is there a MSS (public) stored procedure that can robustly give back the logged in user name so I can bypass the SQLGetInfo call?
View 2 Replies
View Related
Nov 29, 2015
I have a requirement to track the sqlserver when any DB changed from multiuser to singleuser.
I want to capture the date and time when anyone change any db from multiuser to single user and save this information in one text or csv file.
How can we do this using powershell?
View 6 Replies
View Related
Apr 3, 2008
Hi All,
I have a sql server database user with Password must change, and I get this error when i use ODBC connection wizard,
18488
Login failed for user '%.*ls'. Reason: The password of the account must be changed.
where would the windows shows up to change it similary we do when we connect through Management studio and provide new password.
Any idea.
View 3 Replies
View Related
May 14, 2008
Hi all
This Job ran yester day fine,to day It got failed with this error
any suggestion to troubleshoot problem is appreciated.
DTSRun OnError: DTSStep_DTSTransferObjectsTask_1, Error = -2147203052 (80044814)
Error string: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
Error source: Microsoft SQL-DMO (ODBC SQLState: 28000)
Help file: SQLDMO80.hlp
Help context: 1131
Error Detail Records:
Error: 0 (0); Provider Error: 0 (0)
Error string: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
Error source: Microsoft SQL-DMO (ODBC SQLState: 28000)
Help file: SQLDMO80.hlp
Help context: 1131
DTSRun OnFinish: DTSStep_DTSTransferObjectsTask_1
DTSRun: Package execution complete.
View 3 Replies
View Related
May 5, 2008
Any idea why this happened and what do i have to do to reslove it?
Code Snippet
Login failed for user 'dd_user'. Reason: The password of the account must be changed.
View 1 Replies
View Related
Mar 15, 2007
I found this interesting paper at http://ftp.sas.com/techsup/download/v8papers/odbcdb.pdf, comparing OLEDB to ODBC.
It says that OLEDB provides record locking where ODBC doesn't. I can't quite reconcile that statement; what does it mean? How is the access layer involved in determining type of locks used by the server in executing a statement?
.B ekiM
View 3 Replies
View Related
May 3, 2004
I have recently moved some native Access tables to SQL Server 7. These tables are updated in code. When the update is done via a SQL statement, I get
"This record is being modified by another user. . . Save, Copy to Clipboard, Drop Changes"
When the record is being updated via DAO code, I get,
"ODBC Call Fail"
Both errors are most irritating and I desperately need to find a way around this. Any suggestions would be greatly appreciated.
Crystal
View 1 Replies
View Related
Jan 17, 2007
Greeting.
I use OdbcConnection inside clr procedure, for getting data. If I use simple EXEC dbo.clr_proc - all is OK. If I use INSERT...EXEC I recive error message: Distributed transaction enlistment failed.
I set MSDTC security options for No Authentification and Allow inbound and Allow outbound, but it's no use.
Have this problem solution? May be, I must use another method to get my data?
P.S. Linked Servers and OPENQUERY is not applicable. Sybase not describe columns in stored proc result set and one stored proc may return different result set by params.
P.S.S. Sorry for bad english.
View 1 Replies
View Related
Jun 20, 2003
Is there a way to monitor all ODBC connections to a MSSQL server and prevent a username/ODBC combination. My problem is that we have many frontends for viewing reports, but we managed them all and users are not allow to make their own connections. Some users now uses MSAccess over ODBC to draw their own reports - they have all the permissions as neededd by the other apps.
thanx
View 4 Replies
View Related
Jul 24, 2006
Greetings,
I have setup a FormView which functions as it should but after the user input is updated, the table record stays unchanged, and when I trap the FormView1_ItemUpdated and look at the SqlDataSource1.UpdateCommand, it shows this:
UPDATE [aspnet_test] SET first_name = '', last_name = '', email = '' WHERE id = @original_ID
Here is most of the code I am using:<asp:FormView ID="FormView1" runat="server" DataSourceID="SqlDataSource1" DataKeyNames="id, first_name, last_name" OnItemUpdating="FormView1_ItemUpdating" OnItemUpdated="FormView1_ItemUpdated" > .. // my ItemEditTempate is here.</asp:FormView>
<EditItemTemplate>First Name: <asp:TextBox Text='<%# Bind("first_name") %>' runat="server" ID="author_name" Columns="20"></asp:TextBox><br />Last Name: <asp:TextBox Text='<%# Bind("last_name") %>' runat="server" ID="TextBox1" Columns="20"></asp:TextBox><br />E-mail: <asp:TextBox Text='<%# Bind("email") %>' runat="server" ID="TextBox2" Columns="20"></asp:TextBox><br /><br /><asp:Button ID="UpdateButton" runat="server" Text="Update" CommandName="Update" /><asp:Button ID="CancelButton" runat="server" Text="Cancel" CommandName="Cancel" /> </EditItemTemplate>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ASPNETDBConnectionString1 %>"
SelectCommand="SELECT id, first_name, last_name, email FROM aspnet_test where id = 1"UpdateCommand="UPDATE [aspnet_test] SET first_name = '<%# first_name %>', last_name = '<%# last_name %>', email = '<%# email %>' WHERE id = @original_ID ">
<UpdateParameters><asp:Parameter Name="original_ID" Type="Int32" /></UpdateParameters></asp:SqlDataSource>
Any idea where the @original_ID is supposed to get its value from, or why does the SQL command shows blank fields?Thanks
Eric.
View 3 Replies
View Related
Mar 2, 2008
Hi try to connect with driver {SQL Sever Client} but i can't
I'm have SQL Server 2005 Express SP2
Error connecting to the ODBC server:[Microsoft][SQL Native Client][SQL Server] Changed database context to..
Please Help me
Thanks
View 10 Replies
View Related
Jun 14, 2007
Hi
I am new to this forum so I hope I have got the right one.
The problem I am having is I installed a new server into an office with 25 users. I joined the users to the new domain with new logins.
The server process then installed outlook 2003 onto each machine. Most machines are windows 2000
Problems arose in sage I have tied this down to the report designer and odbc.
On every machine bar 1 the report designer crashed when running a report. The problem like I said was that you cannot now connect to the odbc driver for sage and when you go into odbcad and try to look at the driver you get an error saying
The setup routines for the sage line 50 odbc driver could not be loaded due to system error 127
Then after that comes
Could not load the setup or translator library
I have looked on the net for this error and it tells you to look in the registry to make sure that the odbcinst is pointing to the correct location, I have checked this and it is. I ahve also checked the security and this seems ok aswell.
The next step was I loaded a fresh copy of windows 2000 into a new folder and tried to load the odbc driver again. This failed with the same as above.
This points to the software settings but I cannot find out where.
Iwas wondering if anyone has had the same problem and they could point me in the right direction.
View 4 Replies
View Related
Nov 15, 2007
Does anyone know how I can use a user variable in a sqlcommand in a Datareader source with an ODBC connection as the source?
I am storing a date value in a user variable(Date) I fill with a SQL Task and then want to use the value in the sqlcommand I use in the Datareader Source. It won't let me use the @variablename in the sql command.
Can anyone help with some advice on how I can make this work?
Appreciate any help I can get.
Thank you
View 5 Replies
View Related
Sep 8, 2004
Here is my problem - I have a user defined function that needs the FIRST value from a specially sorted result set. When I do my set statement I get the LAST value in my result set. I can't figure out how in a SQL function to only get that first value (since I can't do a cursor or temp table).
Example: My table has a keyid (created by identity value, the value I need)
Also it has a vendorid, a repid, and an inventoryid. These tie out to other tables.
If I sort my result set in a certain descending order, the first record's keyid is the value I need. Problem is that I am getting the last keyid instead of the first. I can't switch my sort though and get the right value, because of some well-placed zeros. Hard to explain.
I guess what I want is something like:
Select @keyid = FIRST keyid from sortedtable order by vendorid desc, inventoryid desc, repid asc
It's the select FIRST that hangs me up. Can't find that function - does it or something like it exist that I can use from within my function? I'm sure it can be done, I'm just sure I don't know how... Thanks for your help. - K
View 4 Replies
View Related
Feb 28, 2007
I have a sql server database that she deleted a record with ID as 2873. I would like to try to add this record manually, but the primary key can't be edit. How can i add this record with the same ID as she deleted?
Many thanks.
View 1 Replies
View Related
Oct 29, 2013
I need to create a query that will select only one record out of x number of record per user id.
Sample Data
User ID | Date |Status
001 |10/1/2013 |01
001 |10/2/2013 |A1
002 |1/1/2013 |BB
003 |5/8/2013 |EE
003 |4/2/2013 |BB
Expected Result
User ID | Date |Status
001 | 10/2/2013 |A1
002 | 1/1/2013 |BB
003 | 5/8/2013 |EE
View 3 Replies
View Related
Mar 30, 2008
I would like to show when leads updated last their records in database. An automated report that tells me when the last date was that the leads updated an entry, only 1 entry per lead.
select Lead,LastUpdated from dbo.KPITbl
I have a table with data that looks like this:
Lead LastUpdated
----------- -----------------------
JOHN SMITH 2008-03-26 08:45:00
JOHN SMITH 2008-03-20 09:33:00
MEG RYAN 2008-02-21 16:16:00
JOHN SMITH 2008-02-21 16:19:00
MEG RYAN 2008-02-21 16:22:00
JOHN SMITH 2008-03-28 16:10:00
JOHN SMITH 2008-03-28 08:49:00
JOHN SMITH 2008-03-23 19:23:00
MARK MCRAE 2008-03-27 03:12:00
MARK MCRAE 2008-03-26 08:48:00
MARK MCRAE 2008-03-26 08:46:00
JOHN SMITH 2008-03-26 08:47:00
JOHN SMITH 2008-03-26 08:48:00
ALLAN WHITE 2008-03-26 08:43:00
ALLAN WHITE 2008-03-26 08:40:00
JOHN SMITH 2008-03-26 08:48:00
Thank you appreciate it.
View 2 Replies
View Related
Jul 23, 2005
I'm trying to determine which user has locked a given record from VB6.I know I can use sp_lock and sp_who, and match up the data to determinewhich users have locked records in my database, however I haven't seen a wayto match the specific user to the specific record. What am I missing here?Thanks!*David*
View 5 Replies
View Related
Dec 10, 2003
Hi Everybody,
On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.
Thanks,
Arif
Server Error in '/' Application.
--------------------------------------------------------------------------------
ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.]
Microsoft.Data.Odbc.OdbcConnection.HandleError(IntPtr hHandle, SQL_HANDLE hType, RETCODE retcode) +27
Microsoft.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method) +838
Microsoft.Data.Odbc.OdbcCommand.ExecuteNonQuery() +80
Calgary.venues.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootCalgarySitevenuesvenues.aspx.vb:32
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
View 5 Replies
View Related
Nov 22, 2006
Im trying to add a new rcord to my db on a button click usign the following code
'data adapter
Dim dAdapt1 As New SqlClient.SqlDataAdapter
'create a command object
Dim objCommand As New SqlClient.SqlCommand
'command builder
Dim builderT As SqlClient.SqlCommandBuilder
'connection string
Dim cnStr As String = "Data Source=ELEARN-FRM-BETA;Initial Catalog=StudentPlayGround;Integrated Security=True"
'dataset
Dim dsT As DataSet
Private Sub connect()
'connection
objCommand.Connection = New SqlClient.SqlConnection(cnStr)
'associating the builder with the data adapter
builderT = New SqlClient.SqlCommandBuilder(dAdapt1)
'opening the connection
objCommand.Connection.Open()
'query string
Dim query As String = "SELECT * from StudentPlayground..Employees"
'setting the select command
dAdapt1.SelectCommand = New SqlClient.SqlCommand(query, objCommand.Connection)
'dataset
dsT = New DataSet("Trainee Listings")
dAdapt1.Fill(dsT, "Employees")
End Sub
Private Sub BindData()
connect()
DataBind()
End Sub
Protected Sub submitButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles submitButton.Click
Dim empID As Integer = CType(FindControl("TextBox8"), TextBox).Text
BindData()
Dim firstName As String = CType(FindControl("TextBox1"), TextBox).Text
BindData()
Dim lastName As String = CType(FindControl("TextBox2"), TextBox).Text
BindData()
Dim location As String = CType(FindControl("TextBox3"), TextBox).Text
BindData()
Dim termDate As Date = CType(FindControl("TextBox4"), TextBox).Text
BindData()
Dim hireDate As Date = CType(FindControl("TextBox7"), TextBox).Text
BindData()
Dim dept As String = CType(FindControl("TextBox5"), TextBox).Text
BindData()
Dim super As String = CType(FindControl("TextBox6"), TextBox).Text
BindData()
Dim newRow As DataRow = dsT.Tables("Employees").NewRow
newRow.BeginEdit()
newRow.Item(0) = empID
newRow.Item(1) = firstName
newRow.Item(2) = lastName
newRow.Item(3) = location
newRow.Item(4) = hireDate
newRow.Item(5) = termDate
newRow.Item(6) = dept
newRow.Item(7) = super
newRow.EndEdit()
'do the update
Dim insertStr As String = "INSERT INTO Employees" + _
"(EmployeeID,FirstName,LatName,Location,HireDate,TerminationDate,Supervisor)" + _
"VALUES (empID,firstName,lastName,location,hireDate,termDate,dept,super)"
Dim insertCmd As SqlClient.SqlCommand = New SqlClient.SqlCommand(insertStr, objCommand.Connection)
dAdapt1.InsertCommand() = insertCmd
dAdapt1.Update(dsT, "Employees")
'Dim insertCmd As new SqlClient.SqlCommand = (builderT.GetInsertCommand()).ToString())
'dAdapt1.InsertCommand = New SqlClient.SqlCommand(insertCmd.ToString(), objCommand.Connection)
BindData()
objCommand.Connection.Close()
objCommand.Connection.Dispose()
End Sub
im not sure wats going wrong because the record is not being added. Please help!!
View 4 Replies
View Related