Im enabling an apllication to use ODBC to connect to sqlserver which currently uses Oracle OCI, i have no prior knowledge about odbc use.
Im unsure how to approach where clause parameters (bind parameters)
ie Oracle OCI
select name into :name from emp where name = :a_name
all seems ok with sqlbindparameter, but sqlexecute fails with sqlstate 22001, String data, right truncation.
The question: can i use ? parameter in where conditions, if not whats the best approach.
Many Thanks.
In a Data Flow task, my data source is the VMark UniVerse ODBC Driver. I have question marks in my SQL Command. I have two variables set up in the task (intended) to provide values to those unnamed parameters. Here is the important portion of that command:
WHERE TR_ORDER_DETAIL_O_QTY_ASSOC_0.Z_ID = TR_ORDER_DETAIL_DATE_ASSOC_0.Z_ID AND TR_ORDER_DETAIL_DATE_ASSOC_0.DATE>= ? AND TR_ORDER_DETAIL_DATE_ASSOC_0.DATE <= ? AND TR_ORDER_DETAIL_O_QTY_ASSOC_0.U_PRICE_CATG_ATTN='Y'
How do I tell SSIS to use the variables as the source for the values of the two unnamed parameters? I get a "Wrong number of input parameters to SQL statement" error when I try to run the package.
I see how to do it in the Execute SQL Task (there is a Parameter Mapping page), but I don't see a similar page anywhere in the data flow task.
Hello all, I have two mult-value parameters in my report. Both of them working with selecting one or more values. But, when I test using "(Select All)" values for both parameters , only one parameter works. The "available values" for these two parameters are both from the data set.
select distinct ProductType from Product order by ProductType
There are several parameters on a report. One of the parameter is a multi-select enabled parameter and I suppressed the value "All" showing as one of the item in the drop down list, simply by filter out the [bha].[bha].CURRENTMEMBER.LEVEL.ORDINAL to 1, as "(Select All)" is pre-assigned to the drop list when multi-select is enabled and it is confusing to show "(Select All)" and "All" in the drop list. However I have another report which is linked to this report and the value which is required to pass to this report for this parameter is "All". Can I pass the "Select All" as a parameter from the other report? If so, how? Thanks.
I have a MS Access database (mdb) containing the following tables:
Crime
Criminal
CrimeCommitted
Hideout
CriminalType
The Criminal table contains information about each criminal and the CrimeCommitted table contains information about the specific crimes. I've written the following query to return only the latest crime committed by each criminal:
Code Snippet
SELECT Criminal.CriminalID, Criminal.Firstname, Criminal.Lastname, Criminal.Nickname, Criminal.Gender, Criminal.DOB, Criminal.Eyes, Criminal.Complexion, Criminal.Weight, Criminal.Height, Criminal.Build, Criminal.Scars, Criminal.Occupation, Criminal.CrimeOrgID, Criminal.IQ, Criminal.Hideout, Criminal.CriminalType, Max(CrimeComitted.Date) AS Last_Crime_Comitted FROM Criminal INNER JOIN CrimeComitted ON Criminal.CriminalID=CrimeComitted.CriminalID GROUP BY Criminal.CriminalID, Criminal.Firstname, Criminal.Lastname, Criminal.Nickname, Criminal.Gender, Criminal.DOB, Criminal.Eyes, Criminal.Complexion, Criminal.Weight, Criminal.Height, Criminal.Build, Criminal.Scars, Criminal.Occupation, Criminal.CrimeOrgID, Criminal.IQ, Criminal.Hideout, Criminal.CriminalType;
This query works fine for obtaining the Criminal table data, but once i've include CrimeCommitted.Country in the SELECT statement, the data returned contained all the crimes committed by each criminal (i just need the latest crime).
The query doesn't work when another table, other than Criminal, is selected. How can i obtain the columns in the CrimeCommitted table in this query?
I have a sqlDataSource control that has its select command and parameters set dynamically. One of the parameters is a date, which should be in smalldatetime format (ie, 12/22/2006). Obviously, using SQL Server, the data is stored with both date and time. The problem is, I cannot get any data selected. I initially thought that I needed to tell it to only look at the date and not the time, but from what I have seen this should work. Here is the pertinent code. dim seldate as datetime selDate = Session("ChosenDate") Dim SelCmd As String = "SELECT [PatientName], [AssignedTo], [CPT], [CPT2], [HospitalID], [RoomNbr], [ACType], [TxDx1], [TxDx2], [MRNbr], [Notes], [PatientID], [PCPID], [ResidentID], [Status], [CaseID], [AdmitDate], [crtd_datetime] FROM [DailyBilling] WHERE ([crtd_datetime] = @crtd_datetime) and ([AssignedTo] = @AssignedTo) and ([HospitalID] = @HospitalID) ORDER BY [PatientName]" SqlDataSource1.SelectCommand = SelCmd SqlDataSource1.SelectParameters.Clear()
Dim parFilterProvider As New ControlParameter() parFilterProvider.ControlID = "ddlProvider" parFilterProvider.Name = "AssignedTo" parFilterProvider.Type = TypeCode.String SqlDataSource1.SelectParameters.Add(parFilterProvider)
Dim parFilterHospital As New ControlParameter() parFilterHospital.ControlID = "ddlHospitals" parFilterHospital.Name = "HospitalID" parFilterHospital.Type = TypeCode.String SqlDataSource1.SelectParameters.Add(parFilterHospital)
Dim parFilterStatus As New Parameter() parFilterStatus.Name = "crtd_datetime" parFilterStatus.DefaultValue = selDate.ToShortDateString parFilterStatus.Type = TypeCode.DateTime SqlDataSource1.SelectParameters.Add(parFilterStatus)
Hi I have a DropDownlist (Drop1) and a GridView,the GridView is bount to an SqlDataSource1 that has 2 Select parameters CatId and SourceId The dropdownlist has a selectedvalue of the following format 15-10(2 numbers seperated by -).I want to set CatId to 15 and SourceId to 10 <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:Art %>" SelectCommand="Select * from Option Where SourceId=@SourceId And CatId=@CatId"> <SelectParameters> <asp:ControlParameter ControlID="Drop1" Name="SourceId" /> <asp:ControlParameter ControlID="Drop1" Name="CatId" /> </SelectParameters> </asp:SqlDataSource> Can anyone help me to define the parameters? thanks
I have a form that has 4 fields to fill in. I have a button that can add these fields to a sql database. I also want to put a button next to the "add" button so you can fill out the same fields and search for those values. Here's what i have so far. I want to select based on the fields, but i'm having trouble with the syntax of the parameters. I also want to add something, so if nothing is filled out in one of those boxes, it retuns back all records for the default value. string strConnection = ConfigurationManager.ConnectionStrings["TimeAccountingConnectionString"].ConnectionString; SqlConnection myConnection = new SqlConnection(strConnection);
String selectCmd = "SELECT * FROM users WHERE firstname = @firstame or lastname = @lastname or office = @office or team = @team"; SqlDataAdapter myCommand = new SqlDataAdapter(selectCmd, myConnection);
I know that when you select Multi from the parameter report properties, that it automatically makes "Select All" Available. So how would i take off the "All Value". My users dont want to see All, if Select ALL is available.
How do i exclude from "All" from my report parameter/dataset??
In multivalue parameters by default an option "All" was appearing. You can select both "All" and any of the individual parameters. However the latest report I created suddenly appeared with "(Select All)" as well as "All". (Select All) actually selects (or deselects) all items.
Does anyone know where (Select All) came from, is this a new thing in SP2? How do you control it.
Also, is there a functionality where you can select "All", but if you then select another paramater it automatically deselects "All"?
hello all, im trying to run a select statement using a parameter, but am having extreme difficulties. I have tried this about 50 different ways but i will only post the most recent cause i think that im the closest now than ever before ! i would love any help i can get !!! Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Dim pageID As StringpageID = Request.QueryString("ID") TextBox13.Text = pageID 'Test to make sure the value was stored SqlDataSource1.SelectParameters.Add("@pageID", pageID) End Sub .... <asp:SqlDataSource ID="SqlDataSource1" runat="server" ProviderName=System.Data.SqlClient ConnectionString="Data Source=.SQLEXPRESS;Initial Catalog=software;Integrated Security=True;User=something;Password=something" 'SelectCommand="SELECT * FROM Table1 WHERE [ClientID]='@pageID' ></asp:SqlDataSource>
The error that i am getting, regardless of what i put inside the ' ' is as follows: "Conversion failed when converting the varchar value '@pageID' to data type int."
The gridview of all the records is displayed on the page by default. There is a lookup of SSN and Name and putting values in those fields should filter the records and display only the row containing entered Name.I have trouble with the SelectCommand. No gridview is displayed with the above command even if value is entered in the Lookup textBox (SrchRefName).But when I change the selectcommand to- (using OR) SelectCommand="SELECT [id], [ref_id], [ref_name] FROM [ref] where [delete_flag] = 'N' AND [flag_transmit] = 'N' OR [ref_name] = @ref_name "> <asp:ControlParameter Name="ref_name" ControlId="SrchRefName" PropertyName="Text" ConvertEmptyStringToNull="false"/> the default gridview is displayed with all the records even though a value is entered in the lookup text box. Please help.
Hi, i have a big problem. I´m having trouble with the select statement in SQL query language. The problem is that I need to retrieve various data from database and the input object is a list. The simple way of doing this is:SELECT <return values>FROM <datatable name>WHERE (<select data parameter>)My problem is that my where parameter needs to be an array list. The simple way of solving the problem would be using a for statement in my c# code and call my store procedure various times, but my array list can be too long and take a long time to connect and search data for each statement, so I need to access the database once.Can anybody help; I would appreciate it very much thx, Malcolm
Here is my problem: I have a strored procedure that inserts some records
into one table and then selects some records from another table at the end.
The stored procedure takes several parameters, first one of them is marked as
OUTPUT. I'm using it to return an id of the inserted record. The procedure is called from asp.net code with first parameter set as ParameterDirection.InputOutput (tried with just Output as well). Now for the problem: if the the select statement at the end returns 0 records everything works and i my first parameter contains the @@IDENTITY value from the insert statement like it is supposed to.
If the select statement at the end returns 1 or more records my output parameter is not updated at all and contains the same value as before the procedure was run. All the records are inserted correctly.
if i try to return the @@identity as a plain select statement instead of through the parameter i get System.DBNull.
I hope you can shed some light on this for me. Here is my stored procedure:
INSERT INTO INQUIRY (LibraryName, ContactName, Address, City, State, Zip, Phone, Email, Comment) VALUES(@libraryName, @contactName, @address, @city, @state, @zip, @phone, @email,@comment)
--i tried including this statement at the end as well but that did not do the
--trick either
select @inquiryId=@@IDENTITY FROM INQUIRY
set nocount on declare @separator_position int -- This is used to locate each separator character declare @objectId varchar(200) -- this holds each array value as it is returned
if(@productIds is not null) begin while patindex('%,%' , @productIds) <> 0 begin select @separator_position = patindex('%,%' , @productIds) select @objectId= left(@productIds, @separator_position - 1) INSERT INTO PRODUCT_INQUIRY_LOOKUP (ProductId,InquiryId) VALUES(@objectId, @inquiryId) select @productIds = stuff(@productIds, 1, @separator_position, '') end end set nocount off
Select Distinct Email from vPRODUCT_CONTACT WHERE ProductId in (Select ProductId From Product_Inquiry_Lookup Where InquiryId=@inquiryId)
This is probably one of the easier questions you get, but I have brain freeze and just can't do it and very rusty.
How can i assign the the values from sql below into variables e.g I want to get all new, pending and cancelled Leads from the rows returned which will come from the status id.
SELECT Count (leadStatusId) As NoOfLeads, leadStatusID, sum(value) As Value FROM [dbo].[tLead] L Inner Join dbo.tLeadStatus S on linkLeadStatus = LeadStatusID Inner Join dbo.tClick C on linkClick = ClickID WHERE L.DateDeleted Is NULL AND linkAffiliateUser = @UserID AND Month(L.DateCreated) = @month And Year (L.DateCreated) = @Year Group by LeadStatusID Order by LeadStatusID asc
Trying to insert into a history table. Some columns will come fromparameters sent to the store procedure. Other columns will be filledwith a separate select statement. I've tried storing the select returnin a cursor, tried setting the values for each field with a separateselect. Think I've just got the syntax wrong. Here's one of myattempts:use ESBAOffsetsgoif exists(select * from sysobjects where name='InsertOffsetHistory' andtype='P')drop procedure InsertOffsetHistorygocreate procedure dbo.InsertOffsetHistory@RECIDint,@LOB int,@PRODUCT int,@ITEM_DESC varchar(100),@AWARD_DATE datetime,@CONTRACT_VALUE float,@PROG_CONT_STATUS int,@CONTRACT_NUMBER varchar(25),@WA_OD varchar(9),@CURR_OFFSET_OBL float,@DIRECT_OBL float,@INDIRECT_OBL float,@APPROVED_DIRECT float,@APPROVED_INDIRECT float,@CREDITS_INPROC_DIRECT float,@CURR_INPROC_INDIRECT float,@OBLIGATION_REMARKS varchar(5000),@TRANSACTION_DATE datetime,@AUTH_USERvarchar(150),@AUTHUSER_LNAMEvarchar(150)asdeclare@idintinsert into ESBAOffsets..HISTORY(RECID,COID,SITEID,LOB,COUNTRY,PRODUCT,ITEM_DESC,AWARD_DATE,CONTRACT_VALUE,PROG_CONT_STATUS,CONTRACT_TYPE,FUNDING_TYPE,CONTRACT_NUMBER,WA_OD,PM,AGREEMENT_NUMBER,CURR_OFFSET_OBL,DIRECT_OBL,INDIRECT_OBL,APPROVED_DIRECT,APPROVED_INDIRECT,CREDITS_INPROC_DIRECT,CURR_INPROC_INDIRECT,PERF_PERIOD,REQ_COMP_DATE,PERF_MILESTONE,TYPE_PENALTY,PERF_GUARANTEE,PENALTY_RATE,STARTING_PENALTY,PENALTY_EXCEPTION,CORP_GUARANTEE,BANK,RISK,REMARKS,OBLIGATION_REMARKS,MILESTONE_REMARKS,NONSTANDARD_REMARKS,TRANSACTION_DATE,STATUS,AUTH_USER,PMLNAME,EXLD_PROJ,COMPLDATE,AUTHUSER_LNAME)values(@RECID,(Select COID from ESBAOffsets..Offsets_Master where RECID = @RECID),(Select SITEID from ESBAOffsets..Offsets_Master where RECID = @RECID),@LOB,(Select COUNTRY from ESBAOffsets..Offsets_Master where RECID =@RECID),@PRODUCT,@ITEM_DESC,@AWARD_DATE,@CONTRACT_VALUE,@PROG_CONT_STATUS,(Select CONTRACT_TYPE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select FUNDING_TYPE from ESBAOffsets..Offsets_Master where RECID =@RECID),@CONTRACT_NUMBER,@WA_OD,(Select PM from ESBAOffsets..Offsets_Master where RECID = @RECID),(Select AGREEMENT_NUMBER from ESBAOffsets..Offsets_Master where RECID= @RECID),@CURR_OFFSET_OBL,@DIRECT_OBL,@INDIRECT_OBL,@APPROVED_DIRECT,@APPROVED_INDIRECT,@CREDITS_INPROC_DIRECT,@CURR_INPROC_INDIRECT,(Select PERF_PERIOD from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select REQ_COMP_DATE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select PERF_MILESTONE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select TYPE_PENALTY from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select PERF_GUARANTEE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select PENALTY_RATE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select STARTING_PENALTY from ESBAOffsets..Offsets_Master where RECID= @RECID),(Select PENALTY_EXCEPTION from ESBAOffsets..Offsets_Master where RECID= @RECID),(Select CORP_GUARANTEE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select BANK from ESBAOffsets..Offsets_Master where RECID = @RECID),(Select RISK from ESBAOffsets..Offsets_Master where RECID = @RECID),(Select REMARKS from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select OBLIGATION_REMARKS from ESBAOffsets..Offsets_Master whereRECID = @RECID),@MILESTONE_REMARKS,@NONSTANDARD_REMARKS,@TRANSACTION_DATE,(Select STATUS from ESBAOffsets..Offsets_Master where RECID = @RECID),@AUTH_USER,(Select PMLNAME from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select EXLD_PROJ from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select COMPLDATE from ESBAOffsets..Offsets_Master where RECID =@RECID),@AUTHUSER_LNAME)select@@identity idgogrant execute on InsertOffsetHistory to publicgo
I´ve build a report with Report Design. On this report I want to show the items customers bought. In this report I added a Report Parameter so the user can select a specific customer. I made an extra dataset and use the filter =@customer and this parameter works fine. Then I want to ad a second Report Parameter: the salesperson. When I leave one of the parameters blank, I get an error "Please select a value for the parameter....". Even if I choose the options allow blank or null values, I get this error. What I want is de possibility to get all the records, to filter records from one specific customer or to filter records from a specific salesperson.
If I have ad hoc SQL statements created by users, which could be parameterized, how could I derive the parmeters at runtime. I cannot use CommandBuilder.DeriveParameters() as that is for StoredProcedures only.
Just use Split on the SQL string? Or is there a better way, such as a third-party .Net Component?
I'm having trouble using session data in my select parameters. If I manually plug a value into the selectcommand or create a hard coded value using a parameter it works, but if I try to use the session data the query pulls no results. I know the session data is set because I print the value at the top of the page, but for some reason it's not getting passed to the sessionparameter??? This is the datasource code: <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:flautoconnstr %>" SelectCommand="SELECT * FROM [tblVehicles] WHERE ([profileid] = @profileid)"> <SelectParameters> <asp:SessionParameter Name="profileid" SessionField="profileid" Type="String" /> </SelectParameters> </asp:SqlDataSource>
This is the line I use to set the session data. Session["profileid"] = myQuote.Profileid;
Hi to allI wish to be able to have a standard select statement which hasadditional fields added to it at run-time based on suppliedparameter(s).iedeclare @theTest1 nvarchar(10)set @theTest1='TRUE'declare @theTest2 nvarchar(10)set @theTest2='TRUE'selectp_full_nameif @theTest1='TRUE'BEGINother field1,ENDif @theTest2='TRUE'BEGINother field2ENDfrom dbo.tbl_GIS_personwhere record_id < 20I do not wish to use an IF statement to test the parameter for acondition and then repeat the entire select statement particularly asit is a UNIONed query for three different statementiedeclare @theTest1 nvarchar(10)set @theTest1='TRUE'declare @theTest2 nvarchar(10)set @theTest2='TRUE'if @theTest1='TRUE' AND @theTest2='TRUE'BEGINselectp_full_name,other field1,other field2from dbo.tbl_GIS_personwhere record_id < 20ENDif @theTest1='TRUE' AND @theTest2='FALSE'BEGINselectp_full_name,other field1from dbo.tbl_GIS_personwhere record_id < 20END......if @theTest<>'TRUE'BEGINselectp_full_namefrom dbo.tbl_GIS_personwhere record_id < 20ENDMake sense? So the select is standard in the most part but with smallvariations depending on the user's choice. I want to avoid risk ofbreakage by having only one spot that the FROM, JOIN and WHEREstatements need to be defined.The query will end up being used in an XML template query.Any help would be much appreciatedRegardsGIS Analyst
Hello, a question please. Could anyone say me if I can create a store procedure with 2 'select's statements into. Besides, I'd want to know if I can execute a "select" depending on input parameters.
Hello, since some hours I'm struggling with 2 multi-value cascading parameters which default values should be always "Select ALL"
First Parameter: available vlaues: From query dataSetsGetCountry (defined as select from tblCountries) ValueFied:ContryName LabelField:CountryName DefaultValues: from Query dataSetsGetCountry ValueFied:ContryName
SecondParameter: available vlaues: From query dataSetsGetAreas (stored procedure which parameter is the list of the selected countries) ValueFied:AreaName LabelField:AreaName DefaultValues: from Query dataSetsGetAreas ValueFied:AreaName
First time I open the report the first and the second parameters are properly filled and for both parameters "select all" is checked.
I select one option from the first parameter, the second parameter's content change dinamically and "Select All" option is still selected !Cool
Now I change the selection on the first Parameter, by checking AN ANOTHER item from the list , the second parameter list refresh dinamically but "Select all" IS NOT selected and only the item that were previously checked kept the selection !!!NO!!
Is this a bug in Reporting services and I have to say to ther user that is not possible to develop what they would like to have or there is , even programmatically, a way to solve it?
Is there a way to retreive the SQL Statement with the values from the parameters merged together? I know how to retreive the SQL Select Statement and the parameters separately but I need to retreive the final SQL. For example: SELECT name FROM employee WHERE id = @id I would like to retreive from SQLDataSource SELECT name FROM employee WHERE id = 1
I have a user login scenario where I would like to make sure that they not only exist in the user table, but also make sure there account is "verified" and "active". I'm trying to return 3 output parameters. UserID, verified, active. Is this possible?
Do I need just a select statement to do this? What is the difference between the output and select statements?
I have a multivalue parameter that has X options. Is it possible to implement a solution that when I go into the report through an action, to have one option (in this case is the first) not selected all all the others are checked?
ENDI would like to perform a sort of dynamic parameter passing to the second function, fn_Nested, reading the values of the numeric field MyCounter in the table OtherTable.Fact is, x.MyCounter is not recognized as a valid value. Everything works fine, on the other hand, if I set in fn_Nested a static parameter, IE dbo.fn_Nested(17).
I have a table which has a field called Org. This field can be segmented from one to five segments based on a user defined delimiter and user defined segment length. Another table contains one row of data with the user defined delimiter and the start and length of each segment. e.g.
Table 1
Org
aaa:aaa:aa
aaa:aaa:ab
aaa:aab:aa
Table 2
delim
Seg1Start
Seg1Len
Seg2Start
Seg2Len
Seg3Start
Seg3Len
:
1
3
5
3
9
2
My objective is to use SSIS and derive three columns from the one column in Table 1 based on the positions defined in Table 2. Table 2 is a single row table. I thought perhaps I could use the substring function and nest the select statement in place of the parameters in the derived column data flow. I don't seem to be able to get this to work.
Any ideas? Can this be done in SSIS?
I'd really appreciate any insight that anyone might have.
Has anyone managed to crack getting multi-select parameters to work from an SSRS 2005 report which is querying an SSAS 2000 cube.
SSRS 2005 does support Multiselect, however SSRS 2000 did not. Given that i am querying an SSAS 2000 cube, i get the impression that i am also limited to SSRS 2000 functionality regarding to multi-select parameters.
Is there anyone out there that ever managed to get a wor around, say by using filters on a table or anything really that coud simulate the same behaviour....
i just can't find a way to perform this Select Query in my ASP.Net page. I just want to find out the sales for a certain period[startDate - endDate] for each Region that will be selected in the checkbox. Table Sales Fields: SalesID | RegionID | Date | Amount This is how the interface looks like.Thank You.
