my package has a data flow task that is attempting to insert data into a sql server table using the ole db destination. the package validates and runs without reporting any errors, but the data was not inserted into the table. my data mappings look fine. how can i see what's happening when the component attempts to insert the data into the table?
View 5 RepliesI have a lookup component which determines if a record is to be updated or inserted. If it does not find match for a particular row that row is sent to the error output of the lookup component from where it is bulk inserted into the database using sql server destination.
Now the problem is when there are no rows to be inserted, the DTS buffer times out throwing an error. However if i increase the timeout or set it to 0, it hangs on indefinitely.
Is there a way that i can ignore the sql server destination when there are no rows to be inserted.
Thanks
[SQL Server Destination [590]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from DTS buffer timed out.".
I need to see inside a SSIS 2012 project a new SSIS installed component, but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane.
View 4 Replies View RelatedI am getting the following error running a data flow that splits the input data into multiple streams and writes the results of each stream to the same destination table:
"This operation conflicts with another pending operation on this transaction. The operation failed."
The flow starts with a single source table with one row per student and multiple scores for that student. It does a few lookups and then splits the stream (using Multicast) in several layers, ultimately generating 25 destinations (one for each score to be recorded), all going to the same table (like a fact table). This all is running under a transaction at the package level, which is distributed to a separate machine.
Apparently, I cannot have all of these streams inserting data into the same table at one time. I don't understand why not. In an OLTP system, many transactions are inserting records into the same table at once. Why can't I do that within the same transaction?
I suppose I can use a UnionAll to join them back together before writing to a single destination, but that seems like an unnecessary waste and clutters the flow. Can anyone offer a different solution or a reason why this fails in the first place?
Thanks in advance.
I have an source file and i have to load it into the data base by changing datatype of the columns in ssis
View 1 Replies View RelatedI am trying to insert data into two different tables. I will insert into Table 2 based on an id I get from the Select Statement from Table1.
Insert Table1(Title,Description,Link,Whatever)Values(@title,@description,@link,@Whatever)Select WhateverID from Table1 Where Description = @DescriptionInsert into Table2(CategoryID,WhateverID)Values(@CategoryID,@WhateverID)
This statement is not working. What should I do? Should I use a stored procedure?? I am writing in C#. Can someone please help!!
I have 2 tables in my database.
one is Race table and 2nd one is Age Range.
I want to write a query where I can see all races and age range as column.
TblRace
ID, RaceName
TblAgeRange
ID,AgeRange.
There is no connection between this two table. I need to display result like below.
Race 17-20 21-30 31-40
A
B
I
W
How do i get this kind of empty data set so that I can fill it out in front end or any better solution. The age range will be displayed as many row as they have. It's not static. Above is just an example.
Hi:
I am a beginner at SSIS subjects, i have a data stored at DataReader Destination and i want continue working whit the data. Somebody can help me?
Regards. deniscuba
I am using OLE DB Destination to write data to a SQL server database. However, nothing is written to the database though there is no error reported. See the following output:
SSIS package "Tbl_Dim_Dates.dtsx" starting.
Information: 0x4004300A at Tbl_Dim_Dates, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Tbl_Dim_Dates, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Tbl_Dim_Dates, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Tbl_Dim_Dates, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Tbl_Dim_Dates, DTS.Pipeline: Execute phase is beginning.
Information: 0x402090DF at Tbl_Dim_Dates, OLE DB Destination [2396]: The final commit for the data insertion has started.
Information: 0x402090E0 at Tbl_Dim_Dates, OLE DB Destination [2396]: The final commit for the data insertion has ended.
Information: 0x40043008 at Tbl_Dim_Dates, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Tbl_Dim_Dates, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Tbl_Dim_Dates, DTS.Pipeline: "component "Date extract to file" (924)" wrote 3652 rows.
Information: 0x4004300B at Tbl_Dim_Dates, DTS.Pipeline: "component "Raw File Destination" (2518)" wrote 3652 rows.
Information: 0x4004300B at Tbl_Dim_Dates, DTS.Pipeline: "component "OLE DB Destination" (2396)" wrote 3652 rows.
SSIS package "Tbl_Dim_Dates.dtsx" finished: Success.
The program '[2708] Tbl_Dim_Dates.dtsx: DTS' has exited with code 0 (0x0).
I can't seem to find a way to make the Data Flow Destination in a Business Intelligence Visual Studion Project output an MDB file for Microsoft Access.
View 4 Replies View Related
I have been searching for the answer to something I thought would be easy to find. But, no luck.
I need to load a csv file into a SQL Server table. The rub is that I need to also parse the filename for a couple of pieces of data also.
Example filename: c:importCustomerX_LocationY_1234.csv
For each record in the csv file I will call a stored procedure the has a parameter for each column in the file plus a parameter for the customer name and a colummn for the location name.
I assume that I will need to use a Script Component to parse the filename fro the information. What is not clear is how I get the filename from the csv connection object and how to get to result of the script component to the inputs of the OLE DB command component that I am using to call the stored procedure.
I have succeeded in using the Derived Column component to put constant values in for the customer and location. But, I cannot figure out how to get to the next step of deriving those two values from the input filename.
Thank you n advance for any assistance,
Jim
Hi all:
I've have a data flow task where I'm importing data into a SQL Server table. All of the fields are mapped, and the source table does not have the uniqueidentifier column (and the destination table will have a uniqueidentifier column). How do I generate a uniqueidentifier for that column without specifiing a default value in the database design? Or is that the only way to do this?
Thanks...
I have an OLEDB source that i would want to ideally take in Excel with a dynamic file name. Right now, i am exporting the data successfully in a flat file (csv) destination. I checked the integrity and it seems like when i try opening the file with Excel ,one of the columns is not fitting in one cell, instead, its taking two cell space ?
With Excel , i was getting the error message saying "Field Name ABC cannot convert between unicode and non unicode string data types".
Any help is appreciated...
Thanks
I am new to integration services. I am trying to a build a data warehouse and need to be able to insert new data as well as update data that has changed. I am getting the data in a flat file and need to import it into SQL 2005. I saw some post on www.sqlis.com/default.aspx?311 but I did the example is for OLE DB component. I am not sure how to achieve this using a text file as source. Any help would be greatly appreicated.
View 3 Replies View RelatedHi everybody,
In our datbase we have a table with text data type.Help me if anybody knows how to insert text data into text data type of sql server.
i am able to modify and retrive but i am not able to insert text. please if u have idea, please give me reply asap.
Thanks,
Giri
I have some website work lined up and it involves some simple modifications to a MS SQL 2000 server. What I'll need to do is add some new data fields and insert some data.
I have some experience with databases - MS Access and MySQL, but I have never used or seen MS SQL 2000. My question is, is this a relatively simple thing to do for someone who hasn't used it before? I can do these things quite simply in Access or MySQL, so is MS SQL 2000 going to be any different?
Also, does anyone know of any free tutorials online that would help me out?
Thanks
Hello friends....
I am looking for 2 things(using c#.net or vb.net and sql svr 2000)
1.convert data from sql server 2000 database (say customers table from northwinds database) to a text file(separated by commas or just plain space)
2.Insert the data from text file back to database.
Can someone pls give me the detailed code to achieve this....really need this on urgent basis.......Thank You.
I want to process data from source table to destination table without using cursor.
At this point; we are creating temp table and inserting data from source to temp table. once we get data into temp table; using while loop we are processing record one by one to destination table.
while executing stored procedure; we noticed that there are few records in source table which are invalid and stored procedure is terminating from such records.
Any better approach to log INVALID data and resume code to process next record instead of terminating.
Is there a default destination component used when a new data flow is created? The reason I ask is simply curiosity. I have an xml file with 2 pieces of data: item A and item B. A should simply get copied out of the file. B should undergo a quick transform. I set up an XML source such that two columns are mapped correctly to the XML source data of A and B. I set up my data transform task as well. So, if I leave those two components on the .dtsx page with no other components, then will there be a default data flow destination already created? ...OR, do you always have to have a destination component?
Thanks for the input. I am just curious.
I have a series of data flow tasks that I want to output to a temp table. I've set the data source for RetainSameConnection and the Data Flows are DelayValidation. The OLE DB data source inside the Data Flow works fine, but the data destinations don't offer a # or ## as a target. I've tried every destination that sounds logical, without success.
Any pointers? ... Thanks!
I have a data flow that reads multiple rows from a table and then inserts to another table for each row. I use an ole destination for my inserts. However, after that insert I need to do other table inserts and I can't figure out how to continue the data flow with the fields in the pipeline. Out of the destination is only the Error flow - Is there a way to do this ?
thx
I have a daily package that extracts some data and writes it into an excel file. I want to write over the existing data, but the excel destination only appends the next free location in the worksheet. I tried using a SQL task to grab the file, set all the cells = NULL and then run the rest of the package, thinking it would see the null cells as empty and write in them, but somehow it knows where the previous data ended and keeps appending further down in the workbook.
Does anyone know of a workaround so I do not have to delete and re-create the file everytime?
TIA,
Sabrina
I am inserting rows using OLEDBDestination and want to redirect all error rows to EXCEL Destination.
I have used Data Conversion Transformation to Convert all strings to Unicode string fields before sending it to Excel Destination.
But its gives the following error.
[Data Conversion [16]] Error: Data conversion failed while converting column 'A' (53) to column "Copy of A" (95). The conversion returned status value 8 and status text "DBSTATUS_UNAVAILABLE".
[Data Conversion [16]] Error: The "output column "Copy of A" (95)" failed because error code 0xC020908E occurred, and the error row disposition on "output column "Copy of A" (95)" specifies failure on error. An error occurred on the specified object of the specified component.
Can someone please tell me what should I do to make it work?
Thanks,
Hi,
I have read only permission in the source (OLTP) database. The source database is running in SQL Server 2000 and the size is more than 200 GB. I need to pull data from source and load target which is running in SQL server 2005.
Following are the objectives I want to achieve.
Data should be loaded on incremental basis.
Whatever changes take place (Update/Delete) in source, that should be replicated to already uploaded data.
Here I want to mention that, the source database does not have any identification key or timestamp column like Updated_Date by which I can filter the data which are recently inserted or updated into the source and upload the same. The source does not maintain any history data also. So I do not have any track of deleted record also.
I don€™t have any scope to change the schema in the source. In this scenario can anybody suggest me the best approach to achieve the above mentioned objectives?
Can I retrieve only the recent updated or inserted date form transaction log back up. Can log shipping solve the give the solution?
One more question. Say I have a table and I am exporting/importing all the data from/to my target table using SSIS or DTS. In this scenario does using query or using directly the table affects the performance?
Regards
Sudripta Rakshit
I need to write TSQL script that will insert, update, delete rows in a production db from new, updated and deleted data from staging db. They are both in different servers and I can only use TSQL. Basically, the production DB needs to be synchornized with the staging DB.
I was thinking using dynamic sql, cursors, and linked servers. Any ideas?
Jim
I would like to extact data from a source system even if it has errors. Then I can transform it and handle the errors in the appropriate manner. Are there any loosely-typed Data Flow Destinations?
View 11 Replies View RelatedI am populating a table using a SQL command. very simple.
SELECT RISKID
,RISKIDREN
,RISKIDEND
,PREMIUMSUBTOTAL
,PREMIUMTOTAL
,SURCHARGE1
,SURCHARGE2
,SURCHARGE3
,SURCHARGE4
,SURCHARGE5
,COMMPREMIUM1
FROM PREMIUM
However, the first three columns are not being populated in the destination table. The other columns come over fine.
The SQL stmt. returns data as expected when run against the source database.
I deleted the source and destination and recreated the flow to prevent metadata mapping issues. In the source editor preview I see all of the columns and data. In the destination editor preview, the first three columns of data are null ???.
It appears that the columns are not mapping properly even though they are in the source and destination of the mapping editor.
I have made sure that the destination mapping contains all the columns in the UI.
The source and destination have the columns represented in the advanced editor metedata. I also checked the XML to verify that the columns are in the destination.
There is a row count between the source and destination. which should have no effect.
This is a part of a larger DW load where I have 10 other tables populated within the dataflow. I also do not get any validation, or error messages. So, I have eliminated truncation errors or the like.
I am really puzzled. Has anyone run accross anything like this?
Hi there,
I need to develop a module and wondering what would be the best implementation...
I get a list of files from a text file and store it in a Recordset Destination (object variable "CUST_INV_LIST").
I need to check that all the files in a directory are in the list. I can loop through the files in the directory using a ForEach container, but how do I check if it is in the CUST_INV_LIST recordset?
I thought about using another ForEach container to loop through the recordset, check if the physical file is equal to that row, if so set a flag, ... but it's neither elegant nor effective.
Another option would be to use a Script Task to search for the physical file name in the recordset. I tried with the Data.OleDb.OleDbDataAdapter, etc. but I get and error when I declare Data.DataTable. Anyways that method of accessing a recordset is not recommanded and seems complicated.
Any suggestion?
Thanks
Hi
i want to compare the source and destination data my source is Oledb source and destination is sql server destination I want to Compare the Data in destination with source and also want to add validation like iF Any row is there is destination but not in source delete that row if any row in source but not in destination Insert that row nd compare source with destination respect to Primary key if There is change in any column of that row Update that if not change than move to next record. Please tell me what is the sutable object and what to do
Please Help me Out
Thanks
Sandeep
Hi,
I am new to SSIS can u help me out in this i have a source(Flat File) and target SQL Server 2005. Source has got 2 columns- Col1 and Col2 even target has got 2 col's Col1 being the PK. I have created a package that checks if target and if the record exist it updates and if it does not it inserts. My package looks like
Source - lookup on target- Conditional split- Derived Column and then 2 OLE DB Destinations 1 for inserts and 1 for updates.
I have created a relationship in lookup with col1 from source and col1 from target and col2 as lookup col and connected red output to 1 OLE DB for inserts and redirect rows to it. Green out put i have taken to conditional split and gave condition like Col2 from source is not equal to lookup col2. I run the package with this it is inserting new records but not updating it.
I tried to add derived column after conditional split but lacks in writing expression that says update col2 records if they changed at source. Can u help me out in this scenario. I would appreciate if you could get back to me ASAP.
Thanks
Instead of blindly inserting all my data from a previous task into a table using "Table" as the Data Access Mode in the OLEDB Destination editor. I would like to join this output with a reference table and insert only qualifying rows. Question is "how do I access the data from previous task so that I can do a meaningful equijoin" ? I know I have to use the "SQL Command" data access mode, but what next ?
Thanks.
chiraj
I have a flat file destination that Im sending data to, from an OLE DB data source. There are two records, but for some reason they are both going on the same line in the output. This is after setting the output to fixed width, from comma delimited.
Help ?
I've SSIS 2005 SP2 and Excel 2007 installed. How come I do not see Excel 2007 on the Excel version list?
Thanks,
Ash