Hello,
.I have a report that accesses data from a Microsoft Access database and in report designer I get the error:
an error has occurred during report processing. Query execution failed for data set, ole db provider msdaora reported an error.
What things can I check? I have tested all my datasources and they succeeded.
Thanks,
Rhonda
My link server was working just fine until friday evening.
It stopped worked over the week end.
with and error Error 7399: OLE DB provider 'MSDAORA' reported an error. OLE DB error .
---my oracle 10g client is working just fine
--TNS names looks fine
---i recreated the link but i am still getting the same error.
I need your help because a lot of jobs are using that link on Monday it is going to be crazzzy.
We have created linked server between SQL Server 2000 and Oracle 10g in offshore environment as well as onsite environment,both the environments are almost IDENTICAL.Basically, the whole execution happens on Oracle and the output is passed to SQL Server.When the below query is executed in offshore environment it is returning values perfectly.
SELECT * FROM OPENQUERY(ORACLE_LINK,'{Call TEST.IVR.lo_Dlr_GetInfo(55,{resultset 2,p_ReturnVal})}')
Here: ORACLE_LINK - is the Linked Server Name,
TEST - Oracle Schema Name
IVR - Oracle Package Name
But when the same query is executed on onsite environment it is raising the following error.
Server: Msg 7321, Level 16, State 2, Line 1
An error occurred while preparing a query for execution against OLE DB provider 'MSDAORA'.
OLE DB error trace [OLE/DB Provider 'MSDAORA' ICommandPrepare::Prepare returned 0x80040e14].
The environment details are:
Offshore Environment(Successfully returning values):
1)Operating System - Windows 2000 Advanced Server
2)Service pack on Operating System - SP4
3)Version on MSDORA.dll(C:ProgramFilesCommonFilesSystemOLED B) - 2.81.1117.0
4)Version on tstbestsql1---SQL Database - SQL Server 2000 Enterprise Edition
5)ServicePack on tstbestsql1---SQL Database - 8.00.2040 (SP3a)
Onsite Environment:
1)Operating System - Windows 2000 Advanced Server
2)Service pack on Operating System - SP4
3)Version on MSDORA.dll(C:ProgramFilesCommonFilesSystemOLED B) - 2.81.1117.0
4)Version on tstbestsql1---SQL Database - SQL Server 2000 Enterprise Edition
5)ServicePack on tstbestsql1---SQL Database - 8.00.2040 (SP4)
We are able to execute if we are executing the query as
SELECT * FROM OPENQUERY(ORACLE_LINK,'select column1 from table1') on the Onshore server and it is perfectly returning the value.I believe the problem might be with "Call" if anyone can help with it that will be great.
Thanks,
Raahul
Dear all,
I have been attempting to set up a linked server in SQL Server 2000 to point to an Oracle database (a very old Oracle database, v7!).
The linked server set up works fine. Then I created a database on the same SQL Server. Within that database I created a view which reads information from a view in the Oracle database (linked server). When I attempted to create this view in Enterprise Manager, I get the following error:
"The operation could not be performed because the OLE DB provider 'MSDAORA' was unable to begin a distributed transaction."
And so I created the view in Query Analyzer. This worked perfectly, no errors, and I can now go into Enterprise Manager and call up the view, which happily goes off to the view in the Oracle linked server and pulls back the info. BUT, when I attempt to do the same thing through an application on a different machine (using OLE Db, and a UDL to connect) the same error as above appears.
Does anyone know what this error means, and where I went wrong? Any help greatly appreciated. My view onto the linked server looks like this:
"CREATE VIEW dbo.NLPG_VIEW
AS
SELECT * from openquery(sadaslink, 'select * from NLPG_VIEW')"
Many thanks in advance for your wisdom!
P.S I wondered whether I need to check if the distributed transaction co-ordinator is running but don't know how.
Thanks,
I keep recieving a "Invalid use of schema or catalog for OLE DB provider "MSDAORA" for linked server D"CUSTOMERLINK". A four-part name was supplied, but the provider does not expose the necessary interfaces to use a catalog or schema."
I'm attempting to set up a linked server from SQL 2005 to Oracle 10.2. I run the following sp_addlinkedserver and sp_addlinkedsrvlogin procedures:
sp_addlinkedserver
@server = 'CUSTOMERLINK',
@provider = 'MSDAORA',
@srvproduct = 'ORACLE',
@datasrc = 'CUSTOMER'
GO
sp_addlinkedsrvlogin
@rmtsrvname = 'CUSTOMERLINK',
@useself = 'False',
@rmtuser = 'CUSTOMER1',
@rmtpassword = 'PASSWORD!'
These procedures complete successfully. I then run a sp_tables_ex procedure:
sp_tables_ex @table_server=CUSTOMERLINK, @table_schema='CUSTOMER1'
This procedure completes successfully and gives me all of the table names in my oracle database that relate to the Customer1 schema.
Then when I go to run a query
select id from [CUSTOMERLINK].[CUSTOMERDB].[CUSTOMER1].[CLIENT] Where name = 'codm'
I recieve a "Invalid use of schema or catalog for OLE DB provider "MSDAORA" for linked server D"CUSTOMERLINK". A four-part name was supplied, but the provider does not expose the necessary interfaces to use a catalog or schema." error.
Any suggestions?
Hi All,
I have a strange problem with one of my Linked server connections. I am connecting from
SQL Server 2005 Standard Edition (9.00.3042.00) to and Oracle 10g database using the Microsoft OLE DB Provider for Oracle. The connection works and I am able to select from all the Oracle tables except for 1 table. When selecting from this table I get the following error:
OLE DB provider "MSDAORA" for linked server "DBNAME" returned message "ORA-01476: divisor is equal to zero".
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "MSDAORA" for linked server "DBNAME".
This probem happens if the table has rows or has no rows (empty table).
I have tried SELECT * and count(*) along with selecting a specific column from the table.
I can use SQL*plus from the system that the SQL database server running on it and select from the table using the same login/password that the linked server uses to rule out a permissions problem.
Any suggestions on what I can try next?
Thanks.
dear list can anyone figure out a workaround as to why OLEDB Provider MSDORA cannot store passwords
I have all the info stored in a table (Project Real Best Practise)
The user id I have stored in string ConfiguredValue gets transfered to OLEDB Provider MSDORA named (SQL_REAL_Source_myoradb) but not the password
To workaround this bug only with MSDORA can aynonne sugest a setting I should use in package security
ie the default is EncryptSensitiveWithUserKey?
thanks Dave
CREATE TABLE [admin].[Configuration](
[ConfigurationFilter] [nvarchar](255) NOT NULL,
[ConfiguredValue] [nvarchar](255) NULL,
[PackagePath] [nvarchar](255) NOT NULL,
[ConfiguredValueType] [nvarchar](20) NOT NULL
) ON [PRIMARY]
ConfiguredValue = Provider=MSDAORA.1;Password=abc;User ID=myuserid;Data Source=myoradb;Persist Security Info=True
PackagePath = Package.Connections[SQL_REAL_Source_myoradb].ConnectionS
Hello,
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
Thanks,
Philippe
I am using SQL Server 2005 and trying to create a linked server on Oracle 10. I used the commands below:
EXEC sp_addlinkedserver
@server = 'test1',
@srvproduct = 'Oracle',
@provider = 'MSDAORA',
@datasrc = 'testsource'
exec sp_addlinkedsrvlogin
@rmtsrvname = 'test1',
@useself = 'false',
@rmtuser='sp',
@rmtpassword='sp'
When I execute
select * from test1...COUNTRY
I get the error. "The OLE DB provider "MSDAORA" for linked server "...." does not contain the table "COUNTRY". The table either does not exist or the current user does not have permissions on that table."
The 'sp' user I am connecting is the owner of the table. What could be the problem ?
Thanks a lot.
I am attempting to link a table to an .ADP using an ODBC link. When I run through the link table wizard, I hit 'finish' and this is the error I get.
[edited to add]: I am running MS Access 2003.
Can anyone help with this or tell me what this error message's translation is? Thanx.
Sean
Hi,
I am using SQL Server 2005,
while trying to retrieve data from the database; I am getting the following
error:
A transport-level error has occurred when receiving results
from the server. (Provider: TCP Provider, error: 0 - The handle is invalid.)
But I am getting this error randomly.
Can some one help me out?
Waiting for your response
Sudhakar
Hi,
Basically the error that I am getting is in our test automation when running as non-admin on the box (regular user). We use .Net C# SQLConnection class to connect to SQL express 2005 impersonating with admin credentials. After getting the connection we try to execute a select command and it some time fails with following error:
A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The handle is invalid.) at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected) at System.Data.SqlClient.TdsParserStateObject.ReadBuffer() at System.Data.SqlClient.TdsParserStateObject.ReadByte() at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader()
This happen only in the non-admin scenario mentioned above. Any idea what is triggering this?
Thanks in advance for all replies.
I'm trying to connect to an Oracle DB from my SQL 2000 server. I have the oracle client installed and I am able to use SQLPlus to connect to the oracle service and run queries. I set up the linked server just like I always do, but now when I attempt to access one of the tables on the linked server I get "Error 7399: OLE DB provider 'MSDAORA' reported an error. I am able to use the OLE DB provider for ODBC and connect with ODBC to oracle, but not with the MSDAORA OLEDB provider.
Windows 2000 Advanced Server, Service Pack 2; SQL 2000 Server
Any help would be great. Thank you in advance.
--Bryan Parke
Hi,
I am trying to connect to my SQL Server 2005 but it gave me following error message.
TITLE: Connect to Server
------------------------------
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
So, Please help me to solve this problem.
tnks.
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)"
this my sql script
use [master]Go
-- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO
-- Switching to our databaseuse [DatabaseName]GO
CREATE SCHEMA schemaname AUTHORIZATION usernameGO
ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO
/* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter'
-- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter]
-- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber]
-- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
Facts:1. I am using my account on Godaddy trying to connect to my sql server db.2. I can get into my db using user id and password.3. Godaddy's help file shows this for a connection string: connectstr = "Driver={SQL Server};SERVER=" & db_server & ";DATABASE="
&db_name & ";UID=" & db_username & ";PWD=" &
db_userpassword4. My connection string: "Server=whsql-v09.prod.mesa1.secureserver.net;uid=dbasolutions;pwd=***;database=DB_87972;" & _ "Trusted_Connection=False providerName=System.Data.SqlClient"{password **** out}5. Get error message An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I tried to email Godaddy's help desk with this information. There first response: We do not allow remote connections to our sql server database.There second response was to read the help file!Does anybody have any suggestions? Thanks in advance,bswanson
We experience the 40 error when our Asp.net code runs under IIS and uses named pipes to a sql server 2005 named instance.
We've tried all suggestions found on blogs and KB articles such as making sure the named pipes protocol is enabled, making sure the Browser service is started, making sure Allow Remote Connections is enabled, making sure we're not using Asp.Net 2.0 membership providers, and the list goes on and on.
We boiled it down to a simple test scenario. We open a SqlConnection to the sql 2005 box in the code with the intention of binding a datareader to a gridview, but it never gets that far because the connection.Open() fails.
If we run this test application as a virtual directory in IIS and Asp.Net 2.0, the connection.Open() fails.
If we run this test application from Visual Studio .Net using Cassini (PWS), the connection.Open() succeeds and binds to the gridview.
What could be causing the connection to fail under IIS but succeed under Cassini? We've tried setting IIS to run as a domain user and with digest authentication enabled. That made no difference.
Any help or insight is appreciated!
Hi to all,
We have 4 client machine and 1 server machine, that server have all the sql server 2005 database��s.
A project developed from client1 with Asp.net 2005 now I need to access that project from client2 so I type http://My Ip address/Folder Name/home.aspx in my browser here when the sql connection is open(SqlConnection.Opn()) then I meet this problem
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Please reply me.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
I am getting this error and using this connection string
Data Source=192.168.0.100;Network Library=DBMSSOCN;Initial Catalog=ENet;User ID=eonline;Password=eonline;
What can be solution for this.
Hi, I am working on VS 2005 and using SQL 2005 Express and i am processing excel files and inserting records in data base as i processing starts and almost after processing 600 i got this error provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server. how can i solve that thanx
View 3 Replies View RelatedHi,
My .NET 2005 application is on a server outsite company's domain. SQL server is in domain and port for sql server is open. TCP/IP is set for remote connection in SQL Server. Connection string in .config is
<add name="X_Conn" connectionString="Data Source=XXX;Initial Catalog=XXX;User ID=XX; Password=XXX;" providerName="System.Data.SqlClient"/>
I receive the error below:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
thanks a lot in advance!
We just changed the dev environment to sqlagent. From then we were unable to see the reports on the report server because:
An error has occurred during report processing.
Cannot create a connection to data source 'IHRSDataSource'.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
this error is cropping up.
To Resolve this issue, we checked the Surface Area Configuration and also checked the Reporting Service Configuration . There seem to be no problem and everything looks ok.
Please help me in resolving this issue.
After I installed the various service packs via Windows Update, my WindowsForms application can no longer connect to the server.
The error message is:
provider: Named Pipe Provider, error: 40 - Could not open connection to SQL server.
However, the Reporting Services work just fine.
Please help.
Hi to all,
We have 4 client machine and 1 server machine, that server have all the sql server 2005 database��s.
A project developed from client1 with Asp.net 2005 now I need to access that project from client2 so I type http://My Ip address/Folder Name/home.aspx in my browser here when the sql connection is open(SqlConnection.Opn()) then I meet this problem
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Please reply me.
Hi All,
I am new to dotnet. I tried connecting to the database MS SQL Server 2000. I gave the code like, the one below, in form load event,
SqlDataReader dr = null;
SqlConnection myConnection = new SqlConnection("Data Source=IP;Initial Catalog=name;User Id=uid;Password=pwd;");
myConnection.Open();
myConnection.Close();
But I could not connect. The error message highlights the line myConnection.Open() and displays the error
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
It tries connecting to SQL Server 2005. There is no SQL Server 2005 in that system. There is only SQL Server 2000.
I have the aspx code in my local system and the database in another machine.
Could Someone please help me out in solving this problem.
Thanks,
Arun. S
hi all
I realised this has been done to death, and so much information out there but I am still in a quandry.
I have had to rebuild my computer.
This is what I did
XP machine
using SQL Server 2005 Standard Edition
using Windows Authentication
NZ6(MSSQLSERVER)
straight default install all the way
unfortunately when ready to run reports from my instance(computer)
I received the error as in provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
thought I had it all okayed but obviously something not right
so ended up unistalling then - did the following:
Load SQL Server from disc1 and start install
failed on alter Counter Registry key error
fixed this from KB article (known error that can happen)
restarted
Went to Windows Update
check IIS is installed - tick is on - IIS - admin tools - make sure asp2 is associated - yes ok
Then back to install sql server - there is no instance set up yet
Disk 2 and setup .exe
All ok on Reporting Services, Analysis etc.
But once again all seems fine but still getting the error:
connection is all fine in Management Studio - eg I can see tables etc
connection is all fine in Business Intelligence - eg I can preview my reports
I then can deploy up to - NZ6
open NZ6
eports
report is there fine - but just errors
some simple little tick that I have not done!!
I seem to have checked and rechecked everything and obviously doing another re-install does not seem a logical step from here.
I will continue to check but if someone jump in and advise please would be great.
cheers
jewel
Hi
I am creating a web site using Visual Studio 2008 & trying to connect to database on SQL Server 2000. My test connection is successful but while debugging the page I am getting this error :
" provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server "
Your suggestions on that will be appreciated.
Thanks
Ashok
Guys!
has MS done Anything about this issue? I am running NT2K and have the same issue y'all having
provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
Does anyone have a fix or a workaround that will work once the application goes live?
Hi,
Am getting the followning error:
{"An error has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact that under
the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)"}
from my application where 3 service references had been added
and hav added this segment in app.config file
<configSections>
<section name="dataConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Data.Configuration.DatabaseSettings, Microsoft.Practices.EnterpriseLibrary.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=null" />
</configSections>
<dataConfiguration defaultDatabase="Connection String" />
<connectionStrings>
<add name="Connection String" connectionString="Data Source=DPA1W075Binstancename;Initial Catalog=SoapBox;Integrated Security=SSPI;"
providerName="System.Data.SqlClient" />
</connectionStrings>
Solutions recommended for this were start running the SQL browser instance and enable Namespipes in Sqlserver configuration manager.Did both.. but nothing worked.
Still getting the same error..
Can somebody plz help me?
Hi guys, I have a problem with error: 40.
I made a Web page, and it works perfect on my local machine, everything is OK, until I uloaded page to the server, it reports this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.WebControls.Repeater.GetData() +50
System.Web.UI.WebControls.Repeater.CreateControlHierarchy(Boolean useDataSource) +232
System.Web.UI.WebControls.Repeater.OnDataBinding(EventArgs e) +53
System.Web.UI.WebControls.Repeater.DataBind() +72
System.Web.UI.WebControls.Repeater.EnsureDataBound() +55
System.Web.UI.WebControls.Repeater.OnPreRender(EventArgs e) +12
System.Web.UI.Control.PreRenderRecursiveInternal() +77
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
I dont't Know what to do. Please HELP!
I've just posted mywebsite andthis error keep being trhrown as soon as I access the DB
I dont understand what is going on and if I dont get it working bu today will delivery date will expire and I will get in trouble...
So anyone knows what is going on
It says the following:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here is my con string :
<add name="ASPNETDBConnectionString" connectionString="Data Source=p3swhsql-v09.shr.secureserver.net;Initial Catalog=myCatalog;User ID=MyID;Password='Mypassword"/>
Thanks a lot
I am getting the following error when i try to connect to the my web site using froma different server. A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) i am using sql express and i attach the database through the connection string in the web config. Any ideas
View 1 Replies View RelatedHi guys, I recently developed a website for one of my client and today client report that i face random error sometime when i access some pages.The complete error description are shown below.A transport-level error has occured when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available. Can any one told me from which reason this error generated and how to resolve it, Client host website on shared hosting plan and uses SQL SERVER 2005 as database management system.Thanks.
View 1 Replies View Related