On Failure I Have To Send A Mail ?
Aug 7, 2006
Hello,
I'm working on SSIS Package, I messing with one problem. I have a sequence container as a parent & it has 4 data flow task. In that data flow task data is ETL in another database server. According to my requirement, if any of the task is failed then i have to send a mail to the concern person describe the cause of failure. Currently i'm doing this by event handler onerror condition. but for one error it sending 4 mail. becuase for one error it's giving 4 error message. i had used another alternative, on failure of task i connect it to another task that sending mail. but it works only when i use logical OR. But i'm not getting whether it's a correct method or not.
Please help me. Soon.
Thanks in advance.
View 3 Replies
ADVERTISEMENT
Dec 13, 2007
Dear all,
I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail.
but still the Mail Task is failing..
plz suggest.
View 11 Replies
View Related
Jun 8, 2006
Hi Everyone,
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
Any suggestions appreciated,
Thanks.
View 11 Replies
View Related
Apr 26, 2007
Hi,
I tried to set up the send Mail Task and got the following message, however can't receive any message:
SSIS package "Package.dtsx" starting.
Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Failure sending mail.".
Task failed: Send Mail Task
SSIS package "Package.dtsx" finished: Success.
The program '[3628] Package.dtsx: DTS' has exited with code 0 (0x0).
Can somebody tell me why?
Thanks,
View 1 Replies
View Related
Sep 25, 2007
Hi,
The send mail task in ssis was failing with following error
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
The firewall for SMTP server was opened.
And successful in sending mail using Database Mail task from the sql server
Do any one have idea why this difference is? Do any one ever faced similar issue?
One reason I could found is McAfee virus scan policy is stopping the SSIS Send mail task.
(source: 9/25/2007 9:00:04 AM Blocked by port blocking rule C:Program FilesMicrosoft SQL Server90DTSinnDtsDebugHost.exe Anti-virus Standard Protection : Prevent mass mailing worms from sending mail 10.237.5.105:25)
Thanks
View 12 Replies
View Related
Mar 23, 2008
i have a package that contains a foreach loop container, in this container i have sql tasks, and execute package tasks, that end with a send mail task. if there something wrong with the smtp server, or it's down, the send mail task fails the package.
i don't want this to happen, what i want that if the send mail taks fails, the package will continue it's execution.
--i thought of using the event handler... but i don't know if it works...
thank you for any help!!!
View 5 Replies
View Related
Mar 26, 2015
I have multiple task flows with precedence constraints and i have changed the constraint as completion to execute the package even though there is failure in one of the tasks in the package but every time the send mail success is executed instead of Send mail Failure task.
View 0 Replies
View Related
Jul 29, 2015
Send Mail task not working properly when it configured in Precedence Constraint (Failure)...
Scenario:
I'm using multiple containers in my ssis package. Also I have configured mail task for capturing error.
I'm getting mail only when error occurs in foreach loop container. If error occurs in other containers it doesn't works.
Actually I would like to receive mail notification on error when it occurs in any of the containers or DFT.
View 9 Replies
View Related
Nov 28, 2007
I have attempted to report out errors at the end of an ETL process by alerting supporting DBAs of errors using the SSIS "Send Mail Task". Task completes along with the sequenced packages, but does not mail anything out. No logic at this time for trigger, just success from the previous task triggering the task to send mail. I also get no errors in the output, and I get no output indicating the send mail task fired, but it does go "green". Do I have to enable database mail and have privileges?
Component Configuration:
SMTP Connection Manager - SMTP Server: arsocex02
Send Mail Editor -
From: messerj@arsocdev.bdev.lab.mil
To: sanderss@arsocdev.bdev.lab.mil
MessageSourceType: Direct Input
Expression: MessageSource = "Package>>> " + @[System:ackageName] +" was executed at>>> " + (DT_WSTR, 40) @[System:tartTime] + " by user>>> " + @[System::UserName] + " on Machine>>> " + @[System::MachineName] + " Errors reported to ERRORS_COURSE_CLASS_STATUS_T: " + (DT_WSTR, 50) @[User::ErrorCourseClassStatus]
Thanks
View 7 Replies
View Related
Jan 19, 2007
Hello All,
Hopefully someone out there will have an idea as this is driving me nuts.
I want to send a dynamic files in attachment files ny send mail task that file name has change follow datetime.
I try to use the expression but I can't use it.
please tell me for this problem.
Any suggestions appreciated,
Thanks.
View 4 Replies
View Related
Aug 18, 2015
I have to send mail with HTML format and attaching multiple files dynamically via send mail task.
View 10 Replies
View Related
Feb 27, 2007
Hello All,
Hopefully someone out there will have an idea as this isdriving me nuts
I have some sample problem.I want to send many email in one send mail task, how can i do it?
what is a signal for separate between email address in send mail task.
please tell me for this event.
any suggesstion appreciated
Thanks you very much.
P.Chonnathan
View 5 Replies
View Related
Feb 10, 2008
Hello,
The Database Mail feature is already enabled on the server, also I have a mail account on the other server.
The problem I faced is that I need to send mail from my SQL Server using a created email account on the other server. How should I configure my email to do that ?
Should I use a sysmail_add_account procedure to enable account, also set profile and profile account ? Does this way creates server mail account that is binded with other email account?
The mail should be sent from my SQL Server.
Thank You.
View 3 Replies
View Related
Feb 6, 2008
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com)
B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com)
C - Just the end portion of the SMTP properties: (abcd.efgh.company.com)
D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
View 7 Replies
View Related
Sep 1, 2006
Hello
I have got a script which gives the mail to the dba mail box when database backup fails.
In the script I want to make a change so that I get the particular database name , on what ever database i implement.
Can you tell me some suggestions.
The script I am using is :
use master
go
alter PROCEDURE dbo.SendMail
@to VARCHAR(255),
@subject VARCHAR(255),
@message VARCHAR(8000)
AS
BEGIN
SET NOCOUNT ON;
DECLARE
@rv INT,
@from VARCHAR(64),
@server VARCHAR(255);
SELECT
@from = 'testsql2000@is.depaul.edu',
@server = 'smtp.depaul.edu';
select @message = @message + char(13) + Char(13) + @@servername + '-'+ db_name()+ '-' + 'Backup Status Failed' + Char(13)
EXEC @rv = dbo.xp_smtp_sendmail
@to = @to,
@from = @from,
@message = @message,
@subject = @subject,
@server = @server;
END
GO
--- After the above script is run the following should be given in the 2nd step when
--- the backup jobs are scheduled ------
exec master.dbo.sendmail
@to = 'dvaddi@depaul.edu',
@subject =' Test sqlserver 2000',
@message = '' ;
Thanks
View 4 Replies
View Related
Nov 10, 2006
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
View 3 Replies
View Related
Jul 29, 2013
NOT ABLE TO SEND TEST MAIL FROM DB MAIL...The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
View 4 Replies
View Related
Oct 2, 2002
hello everybody.
I have server server1
sql server and agent and mail profiler
running using mydomainsvcsql
dts (test_dts)created by user domainalex
with "use windows athentication"
dts steps
1. exe sp_who2
2. send mail to joe
user domainjoe run
DTSRun /S server1 /E /N test_dts
with error
Error: -2147220352 (80040480); Provider Error: 0 (0) Error string: Logon failed: MapiLogonEx Failed due to MAPI error 273: MAPI Logon failed
what permisissions should be granted to
domainjoe
in order to run dts from DTSRun ?
Thank you
View 4 Replies
View Related
Jul 29, 2013
NOT ABLE TO SEND TEST MAIL FROM DB MAIL///The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
View 3 Replies
View Related
Jul 14, 2015
Is there anyway to send excel file from ssis using send mail task without saving the excel file locally. I need to automate the process which involves loading the excel file from the database and send it to some people.
View 6 Replies
View Related
Jul 23, 2005
On a Windows 2000 Server in MYDomain I can do the followingsuccessfully:Net Send JoeUser "test"However on a Windows Server 2003 (Standard Edition) in MyDomain I get:An error occurred while sending a message to JoeUser.The message alias could not be found on the network.More help is available by typing NET HELPMSG 2273.If I enter: net send /DOMAIN:MyDomain joeuser "test"net send comes back with:The message was successfully sent to domain MyDomainBUT... no popups are received.Is there something common to a Windows Server 2003 server that I needto configure to get this to work?How does this relate to SQL Server 2000? I figure that if I can get itto work via a command prompt that it will work for notification as well-- which at this point it doesn't.Thanks for any help.RBollinger
View 2 Replies
View Related
Jul 20, 2005
xp_sendmail has died on our SQL Server, I get error "xp_sendmail:failed with mail error 0x80004005" if I try using it.I believe that the reason that this has happened is because the SQLServer service account is unable to send mail, as follows:If I log on to Outlook Web Access as the SQL Server service account(SVC_SqlServer) I am able to receive mail. However, any mail sent fromthis account simply dissapears.It appears in the Sent items folder (in OWA for the SVC_SqlServeraccount) but the recipient (me, in this case) never receives it!Does anyone know why this account is unable to send mail?Help!eddiec :-)
View 1 Replies
View Related
Jan 3, 2007
Hi,
How can I Send Mail with the query result having multiple rows. What type of dataflow destination is correct (recordset, datareader). The Send Mail task is working correctly. But, the message is blank without any result set.
Appreciate your help.
Thanks
View 16 Replies
View Related
Aug 20, 2007
hi friends
1) sql connection SMTP Connection Manager 1 (windows authenditacaion/smtp both itried i was selected)
2) from/to /cc : i entered som mail ids of yahoo
3) subject : Hi koti how r u ,i am fine here
4) message source type : variable
SMTPSERVER: it is just string with null value i was declare a variable
ok fine then
how to use the send mail in the foreach loop example please send me
regards
koti
View 1 Replies
View Related
Oct 6, 2004
Hi,
I have a requirement of sending mail through SQL Server through SMTP port... But, I dont want to configure my database server as e-mail client...
Is there any way to do it...
Thanks in advance...
View 5 Replies
View Related
Oct 18, 2004
We have jobs running successfully on one server. The jobs incluce a send mail step as one of the steps. We migrated the DB to a new server. I also migrated the jobs. Now the job is failing. We are getting error with the send mail task.
The error says the stored procedure 'master.dbo.xp_smtp_sendmail' could not be found. I am not sure what is the problem. Please advise.
Thanks
Radhika
View 4 Replies
View Related
Apr 29, 2008
hi
how to send mail in sql server2005
View 1 Replies
View Related
Jun 3, 2008
Hi all
I want to send a mail from sqlserver2005.
could you help me out
View 2 Replies
View Related
Aug 24, 2007
hi allmy query is how can i send mail by using sql server, i think by unsingxp_sendmail store procedure we can do this but my problem is whatparamater to be pass to this store procedure if i want to send mailfrom my local machine to another user, bcos i am geeting this errormsg in query analyzer...query:-EXEC master..xp_sendmail 'ss35934' (ss35934 is valid user namepresent into my local nerwork)getting error msg :- xp_sendmail: failed with mail error 0x80040111from:- sachin shah
View 3 Replies
View Related
Jul 20, 2005
I have a SQL Server 2000 application that send's e-mail to users usingthe xp_smtp_sendmail procedure. That works fine. What I would liketo do is RECIEVE e-mail with SQL Server.Example: I text message an alert to a user. They reply with somekeyword in the subject of their reply e-mail, such as 'ACKNOWLEDGED'or 'ACK' for short. SQL Server recieves this and then acts upon itwith a stored procedure, etc.Anyone know if this is possible and with what tool?TIA,Lindsey
View 3 Replies
View Related
Jul 13, 2007
I need to send an email for each row in a dataset. The data set will contain the order number. I need to first look up the order detail based on the order number and put it into an e-mail. Should I use the OLE DB command object for this?
View 3 Replies
View Related
Nov 21, 2007
Hi All,
I want to use send mail task with multipal email address for that i have to use comm or ?
Thank You,
Aric
View 5 Replies
View Related
