Output File With Header
May 16, 2002Is there a way to save the column heading name in query analyzer when you save as a csv.file
View 1 RepliesIs there a way to save the column heading name in query analyzer when you save as a csv.file
View 1 RepliesIn my SSIS Package, I have to write my [FileHeaderRecord] row, then my [BatchHeaderRecord] row, then my details. How can I do this in a SQL Server Query? When I try my SSIS, my file looks like so..
FHTEST 00000208262015 BH000208262015
I want my BH, Batch Header data, to appear on a new row in the file.Do I have to build a dynamic query to do this?Is there any trick in SSIS to do something like this?I did try creating separate Data Flow Tasks to Query the [FileHeaderRecord] and then use a Flat File Destination and then another Data Flow Task to Query the [BatchHeaderRecord] and use a Flat File Destination again NOT overwriting the file.
Hi,
I've created a stored procedure that creates a script to create a number of objects within the database (based on what existing objects are in the database). From Management Studio, this works fine, and the output is exactly as I want it.
I'm now trying to create a job that will execute this stored procedure, and deposit the results into a file somewhere on the server. When the job runs, the script is created in the correct place and is essentially ok.
However, there are a couple of questions I'd like to ask.
Why does SQL Server Agent put a header at the top of the output file? I was hoping to be able to use that output file 'as is' and execute it automatically to recreate my objects when required. (Obviously, I can manually remove the header, but this is an inconvenience in this situation). How do I stop it?
Also, when executed from SSMS, the output is correctly line-spaced. But, the output from the scheduled job adds an extra line between each line of text, which is, again, inconvenient. Why does it do this, and how can I prevent this (again, without manually editting the output)?
Any thoughts and help greatly appreciated.
Cheers
Simon
I'm copying data out to a file with pipe delimiters. I would like toadd a header and trailer.Is this possible? If so, please help me with the steps.Also, is it possible to append to a text file while doing the bcp? Ifso, how?
View 1 Replies View RelatedHelp,
I am trying to create a csv file without the field header information. First, I hid the table header row, then each column header separately, then removed the table header alltogether, but when I print to a CSV file the field headers still show up. This file is going to be use as input to another application and they do not want the header information.
What I get now:
OrderNo,OrderDate,OrderAmt
1,3/1/08, 25.00
2,3/1/08,25.00
3,3/1/08,25.00
4,3/1/08,25.00
What I want:
1,3/1/08, 25.00
2,3/1/08,25.00
3,3/1/08,25.00
4,3/1/08,25.00
Thanks for any help,
Fred
have
select isntuser from syslogins
output
isntuser
--------
1
want
select isntuser as [Joe]+char(13) +[Blowwwwwwww] from syslogins
Joe
Blowwwwwww
--------
1
any idea ?
Hi All,
I've got a main report with five subreports. Based on a value of a parameter in the main report one the subreports is filled with data, all the other subreports will have no records. When the report is displayed in on the reportserver it is working fine, bit when I export the data to a CVS format, also the element names of the subreports are added to the CSV Output.
When i change the value of Data Output of the subreport item in the main report to Auto it doesn't export the records of the filled subreport.
How can I disable the export of the dataelement names in the CSV export?
Hope you can help
Thanks,
Eric
Hi,I am trying to use BULK INSERT with format file. All of our data hasfew bytes of header in the data file which I would like to skip beforedoing BULK INSERT.Is it possible to write format file to skip these few bytes ofheader before doing BULK INSERT? For example, I have a 1 GB data filewith 1000 byte header. Except for first 1000 bytes, rest of the data isgood for BULK INSERT.Thanks in advance. Sorry if it is really a dumb question as I am newto BULK INSERT and practicing still.Bob
View 7 Replies View RelatedI have a tsql script that gets the data I need, into the format I need, and saves it in a format (.output) I needI also have a script that creates a header for the report, basically its just a name and rowcount() that also works fine.PROBLEM: If I combine them using UNION, I have to pad out the header report with NULL columns, and it messes up the layout of the report.Anyone have a simple way to do this?here's my code:SELECT 'A71310000'+ltrim(Str(count(UserName))) + 'HRBATCH' AS header, NULL as col2, NULL as col3, NULL as col4, NULL as col5, NULL as col6, NULL as col7, NULL as col8FROM db_owner.PS_HR_HrsWHERE Reported is NULLUNION ALLSELECT EmplID, Convert(VarChar,DateWorked,111),'STSSH', CAST(REPLACE(STR(HoursWorked,9, 5), SPACE(1), '0') AS nchar(9)), HRAccountCode, CAST(REPLACE(STR(EmployeePayRate,18, 6), SPACE(1), '0') AS nchar(18)), 'A_STUDSUM', HRAccountCodeOverrideFROM db_owner.PS_HR_HrsWHERE reported is NULL What I need it to look like is: A713100007HRBATCH
10068800
2007/06/04STSSH012.00000 A108145 00000000007.500000 A_STUDSUM
10068800
2007/06/05STSSH002.00000 A108145 00000000007.500000 A_STUDSUM ...(this is a ragid right with spaces padding out fixed width columns) THANKS for ANY light ANYONE can shed on this.
I have a parent a package which contains a bunch of Execute Package tasks. The parent package sets a variable which contains the directory for writing logs to. Each child is configured to write logs to a text file, and uses a connection manager for doing so. The connection manager uses an expression for setting the connection string, and in this expression the log directory varaible is used (e.g. @[User::LogDir] + "\FileName.log").
Now the problem is this, when I run the ETL, I'm getting 2 set of log files for each package: one log file is created in C: and the other in the correct dirctory. Each log in C: just contains a single header row, and the corresponding log file in the logging dir contains the log data (including the header row). Even though the filename is specified in an expression, a value for the connection string appears in the properties for the connection manager ("Filename" which probably where the C: log files are coming from). I can't seem to remove this value, and I don't want to hard-code it to a fixed path. I've also set DelayValidation to True, with no luck. I feel I must be missing something obvious, any suggestions? Thanks!
used bcp utility to send data to output file in tab-delimited format (-t ), but headerfile is separate entity in this query.
when I set FILEheader = firstname,lastname...what must I use to change the comma to tab in the header string. I have tried various ways , {t}, [-t], and others. what am I missing?
Hi,
I am trying to load data from a csv file into a sql table. The csv file has 30 columns and 40-50 rows.
Here is an example of the csv file
Header: Painting, DryWall, Flooring
Row1: 100, 200, 300
Here is an example of the Department lookup table
DeptNo, DeptName
11, Painting
22, DryWall
33, Flooring
I have to load the sql table like this
DepNo, Cost
11, 100
22, 200
33, 300
I tried to read the csv with/without headers, couldn't find a way to get the header as I was reading through the rows to get to the DeptNo.
Any ideas. Any help is appreciated.
Thanks.
hi everyone!
i am currently creating a package which involves getting data from CSV files. i can successfully get the data from the files, my problem is, i need to get data from the header of the CSV files. i am currently skipping the header rows. the format of the CSV files is as follows:
-----------------------------------------------------------------------------------
Date, 20070704
Store Code, storeCode1
data row.....
data row.....
data row.....
-----------------------------------------------------------------------------------
technically, i also need the date from the header row, but since it is also indicated in the data rows, i have no problem with that. what i need is the Store Code, which is not indicated on the data rows. i need to store the data in a database in the following format:
-----------------------------------------------------------------------------------
StoreCode Date column1 column2 column3 ......
storeCode1 20070704 ...
storeCode2 20070704 ...
storeCode3 20070704 ...
-----------------------------------------------------------------------------------
any idea how SSIS can handle this? thanks a lot!
Hi All,
Any one could help me like how to port the data into the SQL Server Database if i have the below sample data in flat file.
2 300 1 3 5058045 09999XX999999999 01/10/200801/18/200840477
3 300 5058045 66 20080118232724
4 300 5058045 03000000235 20080118232724
4 300 5058045 03000000322 20080118232724
4 300 5058045 03000000335 20080118232724
Basically, Marked Red record stands for Transaction Header, Marked Green records are Transaction Detail 1 and Marked Blue records stands for another Transaction Detail 2.
Now I need to move the data, based on the Record Type ( First Column 2,3,4) If its RecTyp 2 then move into Tran Header table, when RecType 3 then move into Tran Det1 table and finally, when RecType 4 then move into Tran Det2 table.
Anyone could guide how to start this migration.
Note: The given sample is the one set of data in that flat file. Similarly in the same flatfile we have multiple set of data.
Hi Anyone
How to export a header and details data from two different table and export it in the below format ?
RecordCount = 129 ------------> Header
001|Manager|2399.00|12 ------------> Detail Lines
002|Technican|1800.00|15
003|Mechanic|1500.00|18
.......
Total Amount = 180000.00 ------------> Footer Line
I want to use the SSIS to do this job can anyone explain step by step.
Thanks,
Madhu
Hi,
I created a header using the following expression
Code Snippet(DT_WSTR, 2 )DAY( GETDATE() )+ RIGHT("0"+(DT_WSTR, 2) MONTH( GETDATE() ),2 ) + (DT_WSTR, 4) YEAR( GETDATE() )+ RIGHT("0"+ (DT_WSTR, 2)@[Usuario::mes],2)+ (DT_WSTR, 4)@[Usuario::ano] + "Column1;Column2"
As you can see it's a 2 line header, but it adds two tab spaces at the begining of the following line.
Any clues?
I need to be able to see if the incoming csv file had a head row different than the previous files header row. That will tell me that I have new columns.
View 3 Replies View RelatedHi All,
I need to create a query which gives me something like this
HH20060831160342
DDasb IT 3000
FF20060831160709000000001
Where 'HH' is the header(followed by Date and time) and 'FF' is the footer (followed by Date, time and no of records)and 'DD' has some details (few fields) from database.I am using UNION to get this result but the problem is that if the count in the footer is 0 then query should not give any output.but If I am using the following query
select 'HH'+convert(varchar,getDATE(),112)+replace(convert(varchar,getdate(),8),':','') as filename,'' as name,'' as dept,'' as sal
union all
select 'DD'+'',filename,dept,sal from emp where empno like '%1%'
union all
select 'FF'+convert(varchar,getDATE(),112)+replace(convert(varchar,getdate(),8),':','')+ REPLICATE(0, 9-len(COUNT(*)))+''+convert(VARchar(10),COUNT(*)) as filename,'' as name,'' as dept,'' as sal from emp where empno like '%1%'
I am getting the result as
HH20060831161226
FF20060831161226000000000
if the second select statement has no records
Please help
I would appreciate some help on a procedure that I have. Using BulkInsert, I would like to import records from a text file. The issue Ihave is the file contains a header - '1AMC_TO_Axiz' and a footer'1AMC_TO_Axiz2". Using a format file, I can get the import to work byediting the file and removing these two entries. Is there a way tosetup the format file to skip these two entries? My file currentlylooks like this:7.0161 SQLCHAR 0 50 "|" 1 keyMemberNo2 SQLCHAR 0 10 "|" 2 fldEffdate.................16 SQLCHAR 0 10 "
" 16 fldNewRecordThanksCharles
I have data arriving in fixed-width EBCDIC format. Each file contains one or more groups of records. Before and after each group there is a header/footer, which is not in the same layout as the records that it describes. Header, record and footer each have a different layout to the other but are consistent within themselves.
Thankfully the one thing header, footer and record layout have in common is their length, so at the moment, using the appropriate code page in the Flat File Connection Manager, I'm able to read all the columns as strings. The headers and footers just come through, albeit a bit weird looking, and I can filter them out with a conditional splt.
However, the header contains information that needs to be appended to each record in the group. Does anyone have any suggestions about how to achieve this? I'm trying to avoid developing a custom data source for this task but, if there's no other way, has anyone done it and do they have any tips?
Hello all,
Is it possible to have two different formats for the header and the data in a flat file connection?
An example text file would look like this:
Col1,Col2,Col3
abcdefghi12345testtesttesttest
abcdeeeee12333setsetsetsetsets
where the header is delimited and the data is ragged right.
It looks like you should be able to accomplish this from the Flat File Connection Manager Editor interface, but perhaps having different delimiter dropdown boxes for the header and columns can only be used if you are using the Delimited format?
Thanks for any info you can provide!
Jessica
I made a mistake in copying my database and somehow lost my file header. How do I recreate my file header without losing all the data in my database? Is there a way to undo my mistake?
Thanks
Debbie
Hello, I'm pretty new to SSIS but so far what I have is a package that exports a SQL Server table to a text file. I needed to add a dynamic header that had the date and time of creation. Now I need to know how many records are being exported and put that number into the header.
For the header I am using a script task in the control flow which works well to put the creation date in the header. The script runs and writes the header and then the data flow exports and appends the records to the same text file. It seems to me since the script runs before the data flow I won't know the amount of records until after the data flow is done.
Maybe I could write the header after the data is gathered but before it is exported. Can anyone make some suggestions?
Basically the text file would be:
2/6/2008
154
Data
Data
Data
...
the 154 would be the total number of records to follow.
While I'm at it can someone tell me how to access the destination file path in the flat file connection? Right now I'm just hardcoding the path into my script.
Thanks,
Gunner
I'm unable to figure out how to write a column header to my flat file destination. My source is a OLE DB SQL query and I need the column names as a header row in my text file destination. This seems easy but the closet I can find is hardcoding the column header row in the header property. Is this the only option?
Thanks
Hey,
I'm looking for a good way to rewrite my T-SQL code with 'bcp' to SSIS package, any help would be greatly appreciated?
I have table1 contain account numbers and output-filename for each account,
I need to join table2 and table3 to get data for each account in table1, and then export as a txt file.
Here is my code using bcp (bulk copy)
DECLARE @RowCnt int,
@TotalRows int,
@AccountNumber char(11),
@sql varchar(8000),
@date char(10),
@ArchPath varchar(500)
SET @RowCnt = 1
SET @date = CONVERT(CHAR(10),GETDATE(),110)
SET @ArchPath = '\D$EDATAWorkFoldersSendSendData'
SELECT @TotalRows = count(*) FROM table1
--select @ArchPath
WHILE (@RowCnt <= @TotalRows)
BEGIN
SELECT @AccountNumber = AccountNumber, @output_filename FROM table1 WHERE Identity_Number = @RowCnt
--PRINT @AccountNumber --test
SELECT @sql = N'bcp "SELECT h.HeaderText, d.RECORD FROM table2 d INNER JOIN table3 h ON d.HeaderID = h.HeaderID WHERE d.ccountNumber = '''
+ @AccountNumber+'''" queryout "'+@ArchPath+ @output_filename + '.txt" -T -c'
--PRINT @sql
EXEC master..xp_cmdshell @sql
SELECT @RowCnt = @RowCnt + 1
END
Hi
This should be incredibly simple and easy, but I can't find any examples of how to do this.
I just want to make a File System Task move a file, and have the destination be filename + date and time. For example \serversharefilename02072007.txt
What syntax do I use in a variable to make this work?
Thanks
I have a sql query:
SELECT
'5' AS 'value/@version',
'database' AS 'value/@type',
'master' AS 'value/name',
LTRIM(RTRIM(( [Server Name] ))) AS 'value/server',
'True' AS 'value/integratedSecurity',
15 AS 'value/connectionTimeout',
4096 AS 'value/packetSize',
'False' AS 'value/encrypted',
'True' AS 'value/selected',
LTRIM(RTRIM(( [Server Name] ))) AS 'value/cserver'
FROM dbo.RedGateServerList
FOR XML PATH(''), ELEMENTS
I need to add some header information to the beginning of the query:
<?xml version="1.0" encoding="utf-16" standalone="yes"?><!--
SQL Multi Script 1
SQL Multi Script
Version:1.1.0.34--><multiScriptApplication version="2" type="multiScriptApplication"><databaseLists type="List_databaseList" version="1">
Everything I have tried ends up as a failure, usually compile issues. My goal here is to be able to automare a configuration file for multiscript so I can keep my server list up to date.
I can't believe it's been a few days and I can't figure this out. We have a flat file (purchaseOrder.txt) that has header and detail lines. It gets dropped in a folder. I need to pick it up and insert it into normalized tables and/or transform it into another file structure or .NET class.
10001,2005/01/01,some more data
SOME PRODUCT 1, 10
SOME PRODUCT 2, 5
Can somebody place give me some guidance on how to do this in SSIS?
Hi,
I'm trying to extract data from a Flat File which is as fixed length as they come. The file has a header, which simply contains the number of records in the file, followed by the records, with no header delimeter (No CR/LF, nothing).
For example a file would look like the following:
00000003Name1Address1Name2Address2Name3Address3
So this has 3 records (indicated by the first 8 characters), each consisting of a Name and Address.
I can't see a way to extract the data using a flat file connection, unless we add a delimeter for the header (not possible at this stage). Am I wrong?
Any suggestions on possible solution would be much appreciated - I'm thinking Ill have to write a script to parse the file manually.
Thanks in advance,
Scott
I have a flat file with header and detail information, it is actually employee punch card data. I need to parse the header line which contains the Employee ID and don't save it to a table just save the value. Then with the detail line, parse the different data elements and save them along with the employee ID to one table. Then continue until the next header line is read.
The file looks something like this:
FINNEY,RONNIE 0001005420
Mon 09/03 700a HOL 8.00
Tue 09/04 630a*E 326p 8.50 8.50
Wed 09/05 645a 330p 8.00 16.50
Thu 09/06 639a 2.40 18.90
HALL,MARK 0001005601
Mon 09/03 700a HOL 8.00
Tue 09/04 608a*E 257p 8.40 8.40
Wed 09/05 601a*E 259p 8.50 16.90
Thu 09/06 606a*E 3.30 20.20
JONES,WILLA JEAN 0001005702
Mon 09/03 700a HOL 8.00
Tue 09/04 556a*E 326p 9.10 9.10
Wed 09/05 600a*E 328p 9.00 18.10
Thu 09/06 554a*E 3.50 21.60
So I think I need a data flow transformation object that let's me save the Employee ID into a variable available when the next record is read. What type of transformation would be best?
I'm trying to create a flat file that has a header like:
/INST=-1
/DELIMITER=","
/FIELDS=FIELD1,FIELD2,FIELD3,FIELD4
/LOCATION=100
data,data,data,data
data,data,data,data
where 'data' represents the data written out by the data flow process to the flat file destination. This actually turns out quite nice except that when I place the lines that start with '/' in the header box for the flat file destination the carriage return doesn't get written correctly after each line and I end up with an unrecognized character when I open the file in a simple app like notepad. I've tried using different encodings for the flat file connection, but to no avail. It is also interesting to note that when I close the package and reopen it the flat file destination editor UI also doesn't recognize the carriage returns and places a box in there place.
Below is a copy of the the property as it is written in the package xml:
<property id="92" name="Header" dataType="System.String" state="default" isArray="false" description="Specifies the text to write to the destination file before any data is written." typeConverter="" UITypeEditor="" containsID="false" expressionType="Notify">/INST=-1
/DELIMITER=","
/FIELDS=FIELD1,FIELD2,FIELD3,FIELD4
/LOCATION=100</property>
Any help is appreciated.
-dotnetwiz
I have a variable defined as "Country". Based on the value, the header row printed needs to be different.
I've already created a 'HeaderRow' variable that I'm able to set using a script task. But how can you set the Header text value at run time from the variable? There is no expression defined for the Header with the Flat File Destination object, and when I attempt to reference the HeaderRow variable as the Header text, the variable name is printed as the header.
Another approach I tried was to write the Header Row separately through another data flow task, but the issue here is: what is the input source when all you have is a Country variable?
I am facing a problem i just want total no row count and it should be show in header .So how can i do in SSIS
Suppose
eg. HeaderName , 3
data1
data2
data3
FooterName,3