Output Parameter
Nov 17, 2005Hello!Can anybody tell me how can I retreive the value of an output parameter from an stored procedure using an SqlDataSource control?Thank you
View 1 Replies
ADVERTISEMENT
The Formal Parameter @ReportingId Was Not Declared As An OUTPUT Parameter, But...what Is This?
Apr 17, 2008After running my ssis pkg for some time with no problems I saw the following error come up, probably during execution of a stored procedure ...
An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The formal parameter "@ReportingId" was not declared as an OUTPUT parameter, but the actual parameter passed in requested output.".
I see some references to this on the web (even this one) but so far they seem like deadends. Doe anybody know what this means? Below is a summary of how the variable is used in the stored proc.
The sp is declared with 21 input params only, none of them is @ReportingId. It declares @ReportingId as a bigint variable and uses it in the beginning of the proc as follows...
Code Snippet
select @ReportingId = max(ReportingId)
from [dbo].[GuidToReportingid]
where Guid = @UniqueIdentifier and
EffectiveEndDate is null
if @ReportingId is null
BEGIN
insert into [dbo].[GuidToReportingId]
select @UniqueIdentifier,getdate(),null,getdate()
set @ReportingId = scope_identity()
END
ELSE
BEGIN
select @rowcount = count(*) from [dbo].[someTable]
where ReportingId = @ReportingId and...lots of other conditions
...later as part of an else it does the following...
Code Snippet
if @rowcount > 0 and @joinsMatch = 1
begin
set @insertFlag = 0
end
else
begin
update [dbo].[GuidToReportingId]
set EffectiveEndDate = getdate()
where ReportingId = @ReportingId
insert into [dbo].[GuidToReportingId]
select @UniqueIdentifier,getdate(),null,getdate()
set @ReportingId = scope_identity()
end
...and before the return it's value is inserted to different tables.
My Output Parameter Is Being Treated As An Input Parameter...why
Sep 25, 2006I have a stored procedure which takes an input parm and is supposed to return an output parameter named NewRetVal. I have tested the proc from Query Analyzer and it works fine, however when I run the ASP code and do a quickwatch I see that the parm is being switched to an input parm instead of the output parm I have it defined as...any ideas why this is happening? The update portion works fine, it is the Delete proc that I am having the problems... ASP Code...<asp:SqlDataSource ID="SqlDS_Form" runat="server" ConnectionString="<%$ ConnectionStrings:PTNConnectionString %>" SelectCommand="PTN_sp_getFormDD" SelectCommandType="StoredProcedure" OldValuesParameterFormatString="original_{0}" UpdateCommand="PTN_sp_Form_Update" UpdateCommandType="StoredProcedure" OnUpdated="SqlDS_Form_Updated" OnUpdating="SqlDS_Form_Updating" DeleteCommand="PTN_sp_Form_Del" DeleteCommandType="StoredProcedure" OnDeleting="SqlDS_Form_Updating" OnDeleted="SqlDS_Form_Deleted"><UpdateParameters><asp:ControlParameter ControlID="GridView1" Name="DescID" PropertyName="SelectedValue" Type="Int32" /><asp:ControlParameter ControlID="GridView1" Name="FormNum" PropertyName="SelectedValue" Type="String" /><asp:Parameter Name="original_FormNum" Type="String" /><asp:Parameter Direction="InputOutput" size="25" Name="RetVal" Type="String" /></UpdateParameters><DeleteParameters><asp:Parameter Name="original_FormNum" Type="String" /><asp:Parameter Direction="InputOutput" Size="1" Name="NewRetVal" Type="Int16" /></DeleteParameters></asp:SqlDataSource>Code Behind:protected void SqlDS_Form_Deleted(object sender, SqlDataSourceStatusEventArgs e){ if (e.Exception == null) { string strRetVal = (String)e.Command.Parameters["@NewRetVal"].Value.ToString(); ............................Stored Procedure:CREATE PROCEDURE [dbo].[PTN_sp_Form_Del] (
@original_FormNum nvarchar(20),
@NewRetVal INT OUTPUT )
AS
SET NOCOUNT ON
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
DECLARE @stoptrans varchar(5), @AvailFound int, @AssignedFound int
Set @stoptrans = 'NO'
/* ---------------------- Search PART #1 ----------------------------------------------------- */
SET @AvailFound = ( SELECT COUNT(*) FROM dbo.AvailableNumber WHERE dbo.AvailableNumber.FormNum = @original_FormNum )
SET @AssignedFound = ( SELECT COUNT(*) FROM dbo.AssignedNumber WHERE dbo.AssignedNumber.FormNum=@original_FormNum )
IF @AvailFound > 0 OR @AssignedFound > 0 /* It is ok if no rows found on available table, continue on to Assigned table, otherwise stop the deletion.*/
-----This means the delete can't happen...........
BEGIN
IF @AssignedFound > 0 AND @AvailFound = 0
BEGIN
SET @NewRetVal = 1
END
IF @AssignedFound > 0 AND @AvailFound > 0
BEGIN
SET @NewRetVal = 2
END
IF @AssignedFound = 0 AND @AvailFound > 0
BEGIN
SET @NewRetVal = 3
END
END
ELSE
BEGIN
DELETE FROM dbo.Form
WHERE dbo.Form.FormNum=@original_FormNum
SET @NewRetVal = 0
---Successful deletion
END
GO
-------------------------------------------------------- When I go into the debug mode and do a quickwatch, the NewRetVal is showing as string input.
Getting Value From Output Parameter
Aug 2, 2006I have an SQL INSERT statement with an output parameter called @CusRef. I have been trying to store this in a session variable, however all i am able to store is the reference to the parameter object. (The returned value stored in the parameter is an Integer)Session("CustomerReference") = DataConn.InsertParameters.Item("CusRef")I cant seem to find a value field or a method to get the value from a parameter. I have also tried using CType(DataConn.InsertParameters.Item("CusRef"), Integer) but it cant convert the Parameter type to an Integer.Please help,ThanksGareth
View 1 Replies View RelatedOutput Parameter?
Aug 25, 2006A SQL Server 2005 DB table named "Users" has the following columns:
ID - int (IDENTITY)FirstName - varchar(50)LastName - varchar(50)UserID - varchar(20)Password - varchar(20)
Before inserting a new record in the DB table, ASP.NET first checks whether the UserID supplied by the new record already exists or not. If it exists, the new record shouldn't be inserted in the DB table & the user should be shown a message saying UserID already exists. To do this, ASP.NET uses a stored procedure. If the value returned by the stored procedure is 1, it means that the UserID already exists. If the value returned by the stored procedure is 0, then the new record should be inserted in the DB table. This is how I have framed the stored procedure:
CREATE PROCEDURE RegUsers @FName varchar(50), @LName varchar(50), @UserID varchar(50), @Password varchar(50), @return_value int OUTPUTAS IF EXISTS(SELECT UserID FROM Users WHERE UserID=@UserID) BEGIN SET @return_value=1 END ELSE BEGIN SET @return_value=0 INSERT INTO Users VALUES (@FName,@LName,@UserID,@Password) END
& this is how I am invoking the stored procedure from the ASPX page:
<script runat="server"> Sub btnSubmit(ByVal obj As Object, ByVal ea As EventArgs) Dim sqlCmd As SqlCommand Dim sqlConn As SqlConnection
sqlConn = New SqlConnection("Data Source=MyDBSQLEXPRESS;Initial Catalog=DB;Integrated Security=True") sqlCmd = New SqlCommand("RegUsers", sqlConn) sqlCmd.CommandType = CommandType.StoredProcedure
With sqlCmd Parameters.Add("@return_value", SqlDbType.Int, 4).Direction = ParameterDirection.ReturnValue Parameters.AddWithValue("@FName", txtFName.Text) Parameters.AddWithValue("@LName", txtLName.Text) Parameters.AddWithValue("@UserID", txtUserID.Text) Parameters.AddWithValue("@Password", txtPassword.Text) End With
sqlConn.Open() sqlCmd.ExecuteNonQuery()
If (sqlCmd.Parameters(0).Value = 1) Then lblMessage.Text = "UserID Already Exists!" ElseIf (sqlCmd.Parameters(0).Value = 0) Then lblMessage.Text = "Thanks For Registering!" End If
sqlConn.Close() End Sub</script><form runat="server"><%-- the 4 TextBoxes come here --></form>
When I execute the above ASPX code, if the UserID I entered already exists in the DB table, then ASPX generates the following error:
Procedure or Function 'RegisterUsers' expects parameter '@return_value', which was not supplied.
pointing to the line
sqlCmd.ExecuteNonQuery()
Can someone please point out where am I going wrong?
How Can I Get And Use An OUTPUT Parameter
Jan 31, 2007Here is what I have so far, I can get a number added to the table running my sproc from management studio. But how do I get it out as it is being intserted and then use it in my code?ALTER PROCEDURE [dbo].[NumberCounter]
-- Add the parameters for the stored procedure here
@InsertDate datetime
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
INSERT INTO tblNumberCounter (InsertDate) Values (@InsertDate);Select IDENT_CURRENT('tblNumberCounter')
END
Public Sub SubmitAdd_Click(ByVal Sender As System.Object, ByVal E As System.EventArgs)
Dim Con As SqlConnection
Dim StrInsert As String
Dim cmdInsert As SqlCommand
Dim myNewReceiptNumber As Integer
Dim ConnectStr As String = _
ConfigurationManager.ConnectionStrings("ConnectionString").ConnectionString
'Add row to receipt table, then get it for ReceiptNumberText field.
cmdInsert = New SqlCommand
cmdInsert.CommandText = "NumberCounter"
cmdInsert.CommandType = CommandType.StoredProcedure
cmdInsert.Connection = New SqlConnection(ConnectStr)
cmdInsert.Parameters.AddWithValue("@InsertDate", System.DateTime.Today.ToShortDateString())
Try
Con.Open()
myNewReceiptNumber = cmdInsert.ExecuteScalar()
'Response.Write(myNewReceiptNumber)
Catch objException As SqlException
Dim objError As SqlError
For Each objError In objException.Errors
Response.Write(objError.Message)
Next
Finally
Con.Close()
End Try
End Sub
Why Am I Not Getting My OUTPUT Parameter
Jan 7, 2008Can anyone see in this stored procedure code and my post sub why the stored procedure is not getting the @ReceiptNumber?
@ReceiptNumber int OUTPUTASBEGININSERT INTO tblNumberCounter (InsertDate)Values (GETDATE())SET @ReceiptNumber=SCOPE_IDENTITY()INSERT INTO tblReceipts (pl_ID,client_ID,PaymentDate,Fund_ID,TenderTypeID,AmountPaid,ReceiptNumber,DateEntered,EnteredBy) SELECT PL.Pl_ID, RS.client_id, PL.pmtDate, RS.rec_fund_id, RS.rec_tendertypeid, RS.rec_amount, @ReceiptNumber, RS.DateEntered, RS.EnteredByFROM tblRec_setup AS RS INNER JOIN tblPayments AS PL ON RS.rec_id = PL.rec_id Sub Post() Dim cmdInsert1 As SqlCommand Dim tr As SqlTransaction = Nothing Dim ConnectStr As String = _ ConfigurationManager.ConnectionStrings("2ConnectionString").ConnectionString Dim conn As New SqlConnection(ConnectStr) cmdInsert1 = New SqlCommand cmdInsert1.CommandType = CommandType.StoredProcedure cmdInsert1.CommandText = "BatchMonthly" 'Get a new receipt number and add it. Dim InsertedIntegerRN As New SqlParameter("@ReceiptNumber", SqlDbType.Int) InsertedIntegerRN.Direction = ParameterDirection.Output cmdInsert1.Parameters.Add(InsertedIntegerRN) 'Try conn.Open() tr = conn.BeginTransaction() cmdInsert1.Transaction = tr cmdInsert1.Connection = conn cmdInsert1.ExecuteScalar() tr.Commit() 'Catch objException As SqlException tr.Rollback() 'Dim ex As SqlError 'Response.Write(ex.Message) 'Finally conn.Close() 'End Try End Sub
Can This Be Done With An Output Parameter?
Nov 4, 2003Hi I want to make a Function in my User class that adds new members into the db. What I want to do is add the users details in using a stored procedure and input parameters and then return a parameter indicating their userid value and set it to a variable.
My userid column in the my db is auto incrementing with a seed of 1 and a step value of 1.
How could I create an output parameter that would return their new user id and then how would i set it to an integer variable.
Thanks
Output Parameter
Jun 21, 2004I keep getting an error stating my stored proc expects "@ret_value" and it's not declared. Even once it is declared, I'm not sure if my proc is going to return the value properly...been working on this half a day.
params put on new line for readability...
Private Sub update_DB()
Dim intResult, ret_value As Integer
ret_value = 0
intResult = SqlHelper.ExecuteNonQuery(ConfigurationSettings.AppSettings("connString"), CommandType.StoredProcedure, "Media_Tracking_add_MarketingID",
New System.Data.SqlClient.SqlParameter("@strMarketingID", txtMarketingID.Text),
New System.Data.SqlClient.SqlParameter("@strAdCampaignName", txtAdCampaignName.Text),
New System.Data.SqlClient.SqlParameter("@strCompany", ddlCompany.SelectedItem.Value),
New System.Data.SqlClient.SqlParameter("@strCampaignType", ddlCampaignType.SelectedItem.Value),
New System.Data.SqlClient.SqlParameter("@ret_value", ret_value, ParameterDirection.Output))
lblSuccess.Text = "RETURN = " & ret_value
End Sub
S Proc
CREATE PROCEDURE [dbo].[media_tracking_add_MarketingID]
@strMarketingID nvarchar(50),
@strAdCampaignName nvarchar(50),
@strCompany nvarchar(3),
@strCampaignType nvarchar(50),
@ret_value int OUTPUT
AS
INSERT INTO media_tracking_Marketing_IDs(MarketingID,AdCampaignName,company,status,CampaignType)
values (@strMarketingID,@strAdCampaignName,@strCompany,'1',@strCampaignType);
set @ret_value = scope_identity();
return @ret_value;
GO
Parameter Output
Apr 28, 2008Can any body help me
CREATE PROCEDURE getRowCount
@where NVARCHAR(500)
,@totalRows INT OUTPUT
AS
BEGIN
DECLARE @SQL NVARCHAR(2000)
SET @SQL = ' SELECT ' + cast(@totalRows as NVARCHAR) + ' = COUNT(*)
FROM Employee E'
IF LEN(@where ) > 0
BEGIN
SET @SQL= @SQL + @Where
END
EXEC (@SQL)
END
It doesn't return a totalRows value.
Thanks in advance.
How Do I Run This SP To Get Output Parameter?
Dec 7, 2007I've tried using:
Declare @answer bit
Execute procUserVer username answer output
Create PROCEDURE procUserVer
@User char(15),
@Validate bit output
AS
Declare @UserFound int
Select @UserFound = count(*)
From usernames
where networklogin = @user
select @userFound
if @userFound >0
set @validate = 1
else
set @validate = 0
Exec Sp With Output Parameter
Feb 28, 2007I have the following sp:ALTER PROCEDURE myspPrepareTextForHTML @MessageContent nvarchar(1400), @returnval nvarchar(1400) outputASBEGINSET NOCOUNT ON;SET @returnval='something'RETURN @returnvalENDWhen I try this:
EXEC myspPrepareTextForHTML @MessageContent='dfgsdfgdf', @returnval OUTPUT
print @returnval
I get the error:Must declare the scalar variable "@returnval".
How can I get this to work?
Need Help Processing SP Output Parameter
May 7, 2007Stored procedure works:
PROCEDURE dbo.VerifyZipCode@CZip nvarchar(5),@CZipVerified nvarchar(5) outputAS IF (EXISTS(SELECT ZIPCode FROM ZipCensus11202006 WHERE ZIPCode = @CZip)) SET @CZipVerified = 'Yes' ELSE SET @CZipVerified = 'Not Valid Zip'RETURN
Need help calling and processing sp information:
protected void C_Search_btn_Click(object sender, EventArgs e){ SqlConnection con = new SqlConnection(ConfigurationManager.ConnectionStrings["localhomeexpoConnectionString2"].ConnectionString); SqlCommand cmd = new SqlCommand("VerifyZipCode", con); cmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.AddWithValue("@CZip", UserZipCode_tbx.Text);
. . . how do you set up output parameter, call the SP and capture output. . . ? if (@CZipVerified == "Not Valid Zip") { TextBox5.Text = "Zip code not valid please re-enter zip"; } else { Continue processing page }
}
Output Parameter Not Return The Value
Nov 7, 2007 In my SP I have an output parameter,
the SP work good,
but in the command parameter I alwase get null value/
here is my code:
and in the profiler I see that the query work and return the value, here the query that I copy from the profiler:
thanks!
Output Parameter In SP Not Working?
Feb 28, 2008Hi everyone,
This is the sp i have written which works fine in the sql server management studio when i run it but when i call it from the vb.net web application the output parameters are generated as nothing but the sp return the data from the select statement, so here is the sp followed by vb.net code to access the sp.
This is the Store ProcedureCREATE PROCEDURE [dbo].StaffAuthenticate
@Staff_ID nvarchar(50),
@Password nvarchar(15),
@IsAuthenticated int OUTPUT,
@P_message_code int OUTPUT
AS
BEGIN
SET NOCOUNT ON;
Select * From Staff;
SET @IsAuthenticated = 0;
SET @P_message_code = 100;
RETURN END
GOThis is the VB.NET code. Dim ConStr As String = GenericDataAccess.GetConnection(IConnectionStrNames.OAAStaffAuthStr)
Dim Conn As SqlConnection = New SqlConnection(ConStr)
Dim Command As SqlCommand = Nothing
Conn.Open()
Command = New SqlCommand()
Command.Connection = Conn
Command.CommandText = "StaffAuthenticate"
Command.CommandType = CommandType.StoredProcedure
Command.Parameters.Add("@Staff_ID", SqlDbType.NVarChar, 50).Value = UserId
Command.Parameters.Add("@Password", SqlDbType.NVarChar, 15).Value = Password
Command.Parameters.Add("@IsAuthenticated", SqlDbType.Int).Direction = ParameterDirection.Output
Command.Parameters.Add("@P_message_code", SqlDbType.Int).Direction = ParameterDirection.Output
Dim myDataReader As SqlDataReader = Command.ExecuteReader()
Dim Res As New StringBuilder
While (myDataReader.Read())
For i As Integer = 0 To myDataReader.FieldCount - 1
Res.Append(myDataReader(i).ToString())
Res.Append(" ; ")
Next
Res.AppendLine()
End While
MsgBox(Command.Parameters("@IsAuthenticated").Value)
MsgBox(Command.Parameters("@P_message_code").Value)
MsgBox(Res.ToString, MsgBoxStyle.Information, "DAL : StaffSqlAuthenticate") Thanks for all the help, Really could use one. Kabir
Output Parameter Question
Mar 25, 2004Hi,
I have stored some HTML in a table using an attribute defined as a "text" datatype. I use a stored procedure to insert the data and it works fine - I can see the formattede HTML via direct table access uising enterprise manager.
Now I need to call back this data into my vb.net program. So I have created another stored procedure and have tried to out put the field via an output paramater. The output parameter is defined as a text datatype without a field size and the sql assigns the data in a format select @field = dbfield ....
I get a message saying that data of type text cannot be output to the parameter? I will only ever return 1 record and setting up an adapter etc seems overkill. Anyone got a workaround for this?
Thanks,
Rob.
How Do I Get A Procedure OUTPUT-parameter...
Apr 25, 2004In my ASP.NET page I use a stored procedure that have a parameter declared as OUTPUT...
however...I do not know how to get this OUTPUT to be stored in a ASP.NET-variable...
this is the sp:
CREATE PROCEDURE spInsertNews
@uidArticleId uniqueidentifier OUTPUT,
@strHeading nvarchar(300),
@strAbstract nvarchar(600),
@strText nvarchar(4000),
@dtDate datetime,
@dtDateStart datetime,
@dtDateStop datetime,
@strAuthor nvarchar(200),
@strAuthorEmail nvarchar(200),
@strKeywords nvarchar(400)
AS
SET @uidArticleId = newid()
INSERT INTO tblArticles
VALUES(@uidArticleId ,@strHeading,@strAbstract,@strText,@dtDate,@dtDateStart,@dtDateStop,@strAuthor,@strAuthorEmail,@strKeywords)
my asp code is something like this:
...
SqlCommand sqlcmdInsertNewsArticle = new SqlCommand(insertCmd, sqlconCon);
sqlcmdInsertNewsArticle.Parameters.Add(new SqlParameter("@strHeading", SqlDbType.NVarChar, 300));
sqlcmdInsertNewsArticle.Parameters["@strHeading"].Value = strHeading.Text;
sqlcmdInsertNewsArticle.Parameters.Add(new SqlParameter("@strAbstract", SqlDbType.NVarChar, 600));
sqlcmdInsertNewsArticle.Parameters["@strAbstract"].Value = strAbstract.Text;
sqlcmdInsertNewsArticle.Parameters.Add(new SqlParameter("@strText", SqlDbType.NVarChar, 4000));
sqlcmdInsertNewsArticle.Parameters["@strText"].Value = strText.Text;
...
sqlcmdInsertNewsArticle.Connection.Open();
sqlcmdInsertNewsArticle.ExecuteNonQuery();
sqlcmdInsertNewsArticle.Connection.Close();
How do I do if I want to catch the OUTPUT-parameter (@uidArticleId)?
anyone?
Output Parameter Or Return Value
May 2, 2005I'm having a terrible time getting a return value from my stored procedure. The sp sets the value and returns it correctly in the query analyzer, but I can't get the calling code - using VB in VS2003 - to read the value. I've tried putting it into an integer, and using a Return, and also putting it into a string, and using an output parameter. Either way: nada. What am I doing wrong????
Here's the sp:
CREATE PROCEDURE sp_HOUSRoomAudits @Result VarChar(1) OUTPUT, @Dorm VarChar(12), @Room VarChar(5), @StuID VarChar(14) AS
DECLARE @Capacity IntDECLARE @Assigned Int--DECLARE @Result VarChar(1)DECLARE @BD BIT
SET @BD=(SELECT Boarding FROM HOUS_StudentMaster WHERE StudentID=@StuID)
SET @Capacity=(SELECT [Student Capacity] FROM HOUS_Rooms WHERE Bldg=@Dorm AND [Room #]=@Room)
SET @Assigned=(SELECT COUNT(PSID) FROM HOUS_StudentMaster a JOIN HOUS_Dorms b ON a.Dormatory=b.Dormitory WHERE b.Bldg=@Dorm AND a.Status='Active' AND a.Room=@Room)
IF (@BD=1 AND @Room='N/A') OR (@BD=0 AND @Room<>'N/A')
SET @Result='3'ELSE IF @Assigned<@Capacity SET @Result='1' ELSE SET @Result='2'
print @Result--RETURN @ResultGO
Here's the calling code; I'm leaving out all the dim's etc down to the output parameter:
Dim Parm4 As SqlParameter = scmdReturn.Parameters.Add("@Result", SqlDbType.VarChar)
Parm4.Direction = ParameterDirection.Output
Parm4.Value = "0"
Try
scmdReturn.ExecuteNonQuery()
strOut = Parm4.Value
Catch ex As Exception
Me.lblProblem.Text = "Failed to execute command, err = " & ex.Message
Me.lblProblem.Visible = True
Finally
scnnReturn.Close()
End Try
Hoping you can help, and thanks!
Ka
Output Parameter Poking My Eye Out
Nov 3, 2005I'm having a blast.I've been trying to get a sproc to work with 3 imputs and 1 output parameter, first I thought it was something wrong with my asp.net (v2.0) code but after some high pursuit code searching I finally tried out the sproc in QA, still didn't work. can you see what's wrong with this sproc?CREATE PROCEDURE gogogod.sp_user_add@username varchar(24),@password varchar(64),@email varchar(64),@errCode varchar(128) OUTPUTAS IF NOT EXISTS(SELECT username, email FROM tblUser WHERE username = @username OR email = @email ) BEGIN DECLARE @uid uniqueidentifier SET @uid = newID() INSERT INTO tblUser (uid, username, password, email) VALUES (@uid, @username, @password, @email) SELECT @uid AS uID SET @errCode = 'user created' END ELSE SET @errcode = 'User already exists' RETURNfor some reason the sproc asks for a 4th input parameter, I tried just adding " , '' " as a fourth and it 'worked' (i think) I couldn't check if there was an output for the @errcode.any ideas?
View 7 Replies View RelatedOutput Parameter Problem
Dec 13, 2005i have the following problem. I have a sproc that takes 2 input
parameters used for the where clause and outputs another 3 output
parameters to be displayed in my aspx page. Below is my sproc as
well as my code of how i call the sproc from asp.net2
---------
SPROC
---------
ALTER Procedure [dbo].[sp_Ret_Users]
@AccountStatus varchar(50),
@LoginName varchar(200),
@Address varchar (50) OUTPUT,
@FName varchar(100) OUTPUT,
@LName varchar (100) OUTPUT
AS
BEGIN
SET NOCOUNT ON;
Select
@Address = address,
@Fname = fname,
@Lname = Lname
From tb_Users
Where
LoginName = @LoginName AND AccountStatus = @AccountStatus
END;
------------------------------------------------------------------------------
Here is my vb code that i use to call from my asp.net2 site
-------------------
Dim connString As String =
ConfigurationManager.ConnectionStrings("UsersConnectionString").ConnectionString
Using myConnection As New SqlConnection(connString)
Dim cmd As New SqlCommand
Dim Command As SqlCommand = New SqlCommand()
Command.Connection = myConnection
Command.CommandText = "sp_Ret_Users"
Command.CommandType = CommandType.StoredProcedure
'Input Parameters
Command.Parameters.Add(New SqlParameter("@AccountStatus",
Data.SqlDbType.VarChar, 50))
Command.Parameters("@AccountStatus").Value =
ddlAccountStatus.SelectedValue
Command.Parameters.Add(New SqlParameter("@LoginName",
Data.SqlDbType.VarChar, 200))
Command.Parameters("@LoginName").Value = ddlLoginName.SelectedValue
'Output Parameters
Dim
AddressParam As New SqlParameter("@Address", SqlDbType.VarChar, 50)
Dim
FNameParam As New SqlParameter("@FName", SqlDbType.VarChar, 100)
Dim
LNameParam As New SqlParameter("@LName", SqlDbType.VarChar, 100)
AddressParam.Direction = ParameterDirection.Output
FNameParam.Direction = ParameterDirection.Output
LNameParam.Direction = ParameterDirection.Output
Command.Parameters.Add(AddressParam)
Command.Parameters.Add(FNameParam)
Command.Parameters.Add(LNameParam)
myConnection.Open()
Dim reader As SqlDataReader = Command.ExecuteReader()
Dim AddressOut As String = AddressParam.Value
Dim FNameOut As String = FNameParam.Value
Dim LNameOut As String = LNameParam.Value
myConnection.Close()
End Using
The last 3 variables AddressOut, FnameOut, LNameOUT do not return any values.
I am sure that my problem is somewhere in my vb code as if i run the sproc in QA it runs ok and outputs the variables.
Output Parameter Vs (variable) = ?
Jan 18, 2006Is there any benefit to using Output parameters:eg.[query set-up and execution goes here]
View 2 Replies View RelatedProblem With Output Parameter In SP
Jul 21, 2004I am having problems returning the value of a parameter I have set in my stored procedure. Basically this is an authentication to check username and password for my login page. However, I am receiving the error:
Procedure 'DBAuthenticate' expects parameter '@@ID', which was not supplied.
This stored procedure is supposed to return a -1 if the username is not found, -2 if the password does not match, or the @ID parameter, which is the user ID, if it is successful. How do i go about fixing this SP so that I am returning this output for @ID?
CREATE PROCEDURE DBAuthenticate
(
@UserName nVarChar (20),
@Password nVarChar (20),
@@ID varchar(4) OUTPUT
)
AS
Declare @ActualPassword nVarchar (20)
Select
@@ID = RegionID,
@ActualPassword =regpassword
From dbo.Regions
Where Region = @Username
If @@ID is not null
Begin
if @Password =@actualpassword
Select @@ID
Else
Select -2
End
Else
Select -1
GO
Output Parameter's To ADO Recordset
Jan 8, 2007Hi guys,
I know this might be the wrong place to post this, but I thought I would try since all of you are very smart here :).
I have a huge problem with an app that I inherited. It is a VB6 app that used RDO.
I am trying to convert it to use ADO, but the problem I am running into is we have allot of stored procedures with OUTPUT parameter's, so instead of the procedure having a SELECT to pass back the value, it is passed back via the OUTPUT parameter.
With RDO this is done easily with just passing back the parameter to a variable.
I am not sure how to do this with ADO. Please shine some light for me.
Here is an example:
RDO code:
Private rqAddRecord As RDO.rdoQuery
Private rs As RDO.rdoResultset
Set rqAddRecord = SQLServerDB.CreateQuery("", MakeSP("sp_UpdCourier", 11))
With rqAddRecord
.rdoParameters(0) = "I"
.rdoParameters(1) = m.nCourierDeliveryID
.rdoParameters(2) = m.dDeliveryDate
.rdoParameters(3) = m.nCourierServiceID
.rdoParameters(4) = m.nCourierID
.rdoParameters(5) = m.sCourierDepartment
.rdoParameters(6) = m.dTimeStart
.rdoParameters(7) = m.dTimeComplete
.rdoParameters(8) = g.sDatabaseUserName
.rdoParameters(9) = m.dInvoiceDate
.rdoParameters(10) = m.sInvoiceNumber
.Execute
m.nCourierDeliveryID = .rdoParameters(1)
End With
Stored Procedure:
CREATE PROCEDURE sp_UpdCourier
(
@ActionCode char(1),-- (I)nsert, (U)pdate, (D)elete
@CourierDeliveryID intOUTPUT,
@DeliveryDate datetime,
@CourierServiceID tinyint,
@CourierID tinyint,
@CourierDepartment char(5),
@TimeStart datetime,
@TimeComplete datetime,
@ChangedUserID char(8),
@InvoiceDate smalldatetime,
@InvoiceNumber char(15)
)
AS
/************************************************** *********************
* Name:sp_UpdCourier
* Author:Markus Waite
* Date: 03/02/04
*-----------------------------------------------------------------------
* Desc:tblCourier Maintenance
*
*-----------------------------------------------------------------------
* $Revision: 4 $
*
************************************************** *********************/
SET NOCOUNT ON
DECLARE@ExistingDeliveryDatedatetime,
@NbrDaysint
IF @ActionCode IN ('I','U')
AND @CourierDepartment = ''
BEGIN
RAISERROR (50075, 16, 1)
RETURN
END
-- Insert
IF @ActionCode = 'I'
BEGIN
-- Validate Existance
IF EXISTS (
SELECT*
FROMtblCourier
WHEREDeliveryDate= @DeliveryDate
ANDCourierServiceID= @CourierServiceID
ANDCourierID= @CourierID
ANDCourierDepartment= @CourierDepartment
ANDTimeStart= @TimeStart
ANDTimeComplete= @TimeComplete )
BEGIN
RAISERROR (50002, 16, 1)
RETURN
END
/*
** Verify if entering another shift that that Times do not overlap
*/
IF EXISTS (
SELECT*
FROMtblCourier
WHEREDeliveryDate= @DeliveryDate
ANDCourierServiceID= @CourierServiceID
ANDCourierID= @CourierID
ANDCourierDepartment= @CourierDepartment
ANDNOT ( (@TimeStart< TimeStart
AND @TimeComplete < TimeStart)
OR(@TimeStart> TimeComplete
AND @TimeComplete > TimeComplete) ) )
BEGIN
RAISERROR (50044, 16, 1)
RETURN
END
BEGIN TRANSACTION
SELECT@CourierDeliveryID = ISNULL(MAX(CourierDeliveryID), 0) + 1
FROMtblCourier (HOLDLOCK)
INSERTtblCourier
(
CourierDeliveryID,
DeliveryDate,
CourierServiceID,
CourierID,
CourierDepartment,
TimeStart,
TimeComplete,
ChangedUserID,
ChangedDate,
InvoiceDate,
InvoiceNumber
)
VALUES
(
@CourierDeliveryID,
@DeliveryDate,
@CourierServiceID,
@CourierID,
@CourierDepartment,
@TimeStart,
@TimeComplete,
@ChangedUserID,
GETDATE(),
@InvoiceDate,
@InvoiceNumber
)
IF @@ERROR <> 0
BEGIN
ROLLBACK TRANSACTION
RAISERROR ('Failed inserting Courier values', 16, 1)
RETURN
END
COMMIT TRANSACTION
--SELECT @CourierDeliveryID
RETURN
END
-- Update
IF @ActionCode = 'U'
BEGIN
/*
** Verify if entering another shift that that Times do not overlap
*/
IF EXISTS (
SELECT*
FROMtblCourier
WHEREDeliveryDate= @DeliveryDate
ANDCourierServiceID= @CourierServiceID
ANDCourierID= @CourierID
ANDCourierDepartment= @CourierDepartment
ANDNOT ( (@TimeStart< TimeStart
AND @TimeComplete < TimeStart)
OR(@TimeStart> TimeComplete
AND @TimeComplete > TimeComplete) )
ANDCourierDeliveryID!= @CourierDeliveryID )
BEGIN
RAISERROR (50044, 16, 1)
RETURN
END
IF EXISTS (
SELECT*
FROMtblCourierDetail d
WHERECourierDeliveryID= @CourierDeliveryID
ANDCONVERT(CHAR,DeliveryTime,14) NOT BETWEEN CONVERT(CHAR,@TimeStart,14) AND CONVERT(CHAR,@TimeComplete,14) )
BEGIN
RAISERROR (50059, 16, 1)
RETURN
END
SELECT@ExistingDeliveryDate = DeliveryDate
FROMtblCourier
WHERECourierDeliveryID= @CourierDeliveryID
IF @@ROWCOUNT <> 1
BEGIN
RAISERROR ('Could not locate current delivery record', 16, 1)
RETURN
END
BEGIN TRANSACTION
UPDATEtblCourier
SETDeliveryDate= @DeliveryDate,
CourierServiceID= @CourierServiceID,
CourierID= @CourierID,
CourierDepartment= @CourierDepartment,
TimeStart= @TimeStart,
TimeComplete= @TimeComplete,
ChangedUserID= @ChangedUserID,
ChangedDate = GETDATE(),
InvoiceDate= @InvoiceDate,
InvoiceNumber = @InvoiceNumber
WHERECourierDeliveryID= @CourierDeliveryID
IF @@ERROR <> 0
BEGIN
ROLLBACK TRANSACTION
RAISERROR ('Failed updating Courier values', 16, 1)
RETURN
END
-- If date changed, then update the Delivery Times
IF CONVERT(CHAR, @DeliveryDate, 101) <> CONVERT(CHAR, @ExistingDeliveryDate, 101)
BEGIN
SELECT@NbrDays = DATEDIFF(dd, @ExistingDeliveryDate, @DeliveryDate)
UPDATEtblCourierDetail
SETDeliveryTime= DATEADD(dd, @NbrDays, DeliveryTime)
WHERECourierDeliveryID= @CourierDeliveryID
IF @@ERROR <> 0
BEGIN
ROLLBACK TRANSACTION
RAISERROR ('Failed updating Courier Detail values', 16, 1)
RETURN
END
END
COMMIT TRANSACTION
--SELECT @CourierDeliveryID
RETURN
END
-- Delete
IF @ActionCode = 'D'
BEGIN
BEGIN TRANSACTION
DELETEtblCourierDetail
WHERECourierDeliveryID= @CourierDeliveryID
IF @@ERROR <> 0
BEGIN
ROLLBACK TRANSACTION
RAISERROR ('Failed deleting Courier Detail values', 16, 1)
RETURN
END
DELETEtblCourier
WHERECourierDeliveryID= @CourierDeliveryID
IF @@ERROR <> 0
BEGIN
ROLLBACK TRANSACTION
RAISERROR ('Failed deleting Courier values', 16, 1)
RETURN
END
COMMIT TRANSACTION
--SELECT @CourierDeliveryID
RETURN
END
-- else
RAISERROR ('Invalid Action Code passed to sp_UpdCourier', 16, 1)
RETURN
GO
Want Sp Output Parameter To Be Displayed
Oct 4, 2007Hi,
I have a sp like this:
Create PROCEDURE sp_child2 @inp int, @out int output
AS
SELECT @out = @inp * 10
GO
In the report screen i want the following:
A text box which will take the @inp(this will come automatically)
When i click the "view report" the output value should be displayed in the textbox i have in the report.
But the problem i am facing is with the above sp is its creating two text boxes automatically asking for @inp and @out.If i dont give anything in @out text box and press the view report an error is thrown asing me to fill the output box.
Isnt it supposed to be a output value?Am i doing something wrong?
please help...
Why Is My Output Parameter Not Working?
Jul 23, 2005Hi,I am currently creating an ASP page that returns a recordset of searchresult based on multiple keywords. The where string is dynamicallybuilt on the server page and that part work quite well. However I wantto also return the number of records in the recordset and I can notmanage to get any output parameter working. Even if I assign SELECT@mycount=100 (or SET @mycount=100) in the SP the only value set inmycount is always NULL. I tested various theories (e.g. early exit,order & naming of parameters etc. but I can not make the SP set theoutput parameters - has it anything to do with the execute?). @mycountalso returns NULL if I test it in SQL QA.What's wrong with this SP (as regards mycount):CREATE PROCEDURE dbo.spFindProducts@mycount integer OUTPUT,@whereString varchar (1000)AS--SET NOCOUNT ON--Set a Default value for the Wherestring which will return all recordsif the Wherestring is blankIF @whereString is NullSELECT @whereString = 'AND TblProduct.ProductID is not null'--Declare a variable to hold the concatenated SQL stringDECLARE @SQL varchar(2500)-- AND (((UPPER([TblProduct].[ProductName] + [ProductGroupCode] +[AttributeValue1] +-- [SearchWords] + [tblSupplier].[SupplierCode] + [SupplierDesc]))Like '%screw%'))SELECT @SQL = 'SELECT TblProduct.ProductID, TblProduct.ProductName,TblProduct.ChapterCode, tblProduct.ProductGroupCode' +' FROM (TblProduct LEFT JOIN TblStockItem ON TblProduct.ProductID =TblStockItem.ProductID) ' +' LEFT JOIN tblSupplier ON TblProduct.SupplierCode =tblSupplier.SupplierCode' +' WHERE 1=1 ' + @whereString +' GROUP BY TblProduct.ProductID, TblProduct.ProductName,TblProduct.ChapterCode, TblProduct.ProductGroupCode'SELECT @mycount = 200; -- testexecute (@SQL);-- next line seems to be ignored ?SELECT @mycount = @@rowcount;GOtiaAxel
View 11 Replies View RelatedGetting OUTPUT Parameter In An OLE DB Command
Jul 12, 2007Is it possible to use stored procedure with output parameter and retrieves the values of that output parameter, in an OLE DB Command within a Data Flow?
What I wanted to do is to get the newly created identity of a row so that I can insert it to the main data set in data flow. I'm not even sure if there is even a much better design to achieve this. I've rummaged the internet but everything I got were all about Execute SQL Task.
Rowversion Output Parameter
Sep 14, 2007Is there an equalivent to scope_identity that supports getting the rowversion value last provided by the system?
The reason I'm asking: We're updating a table, and I want to send the rowversion value back to the client as an output paramter so they can update again without running into a false positive concurrency error.
Without something like scope_identity, I have to run a select statement after the update just to get the rowversion that was provided by the system, and that hardly seems efficient.
My goal is to avoid the extra code and the select statement.
Can A Value Be Assigned To An Output Parameter And Be Used In A Where Clause?
Dec 18, 2006I need to update a table using a stored procedure that "UPSERTS". In this case, @OfficeId is passed with ParameterDirection.OutputSo when I update I assign the value to OfficeId like this (the office id value is being correctly assigned): SqlParameter OfficeIdParam = new SqlParameter("@OfficeId", SqlDbType.Int, 4); if (_officeId > 0) { OfficeIdParam.Value = _officeId; } OfficeIdParam.Direction = ParameterDirection.Output; The following segment of the stored procedure is throwing an error that the OfficeId does not exist: Update --- @OfficeId int output if not exists (select 1 from ORG_Office where OfficeId=@OfficeId) begin RAISERROR ('OfficeId does not exist in ORG_Office: E002', 16, 1) -- OfficeId does not exist. return -1 end May this approach work, and if the operation turns out to be an Insert I may do this:select @error_code = @@ERROR, @OfficeId= scope_identity() Thank you,jspurlin
View 1 Replies View RelatedStored Procedure Output Parameter
Aug 19, 2007 I have two stored procedures one generates an output parameter that I then use in the second stored procedure.
1 Try2 Dim myCommand As New SqlCommand("JP_GetChildren", myConn)3 myCommand.CommandType = Data.CommandType.StoredProcedure4
5 myCommand.CommandType = Data.CommandType.StoredProcedure6 myCommand.Parameters.Add(New SqlParameter("@ParentRule", Data.SqlDbType.NVarChar))7 myCommand.Parameters.Add(New SqlParameter("@PlantID", Data.SqlDbType.NVarChar))8 myCommand.Parameters.Add(New SqlParameter("@New_ReleasingRulePrefix", Data.SqlDbType.NVarChar))9 myCommand.Parameters.Add(New SqlParameter("@New_ReleasingRuleSuffix", Data.SqlDbType.NVarChar))10 myCommand.Parameters.Add(New SqlParameter("@New_PlantID", Data.SqlDbType.NVarChar))11 myCommand.Parameters.Add(New SqlParameter("@New_RuleSetID", Data.SqlDbType.NVarChar))12 myCommand.Parameters.Add(New SqlParameter("@Count", Data.SqlDbType.Int))13 myCommand.Parameters.Add(New SqlParameter("@IDField", Data.SqlDbType.NVarChar))14
15 Dim OParam As New SqlParameter()16 OParam.ParameterName = "@IDFieldOut"
17 OParam.Direction = ParameterDirection.Output18 OParam.SqlDbType = SqlDbType.NVarChar19 myCommand.Parameters.Add(OParam)20
21
22 myCommand.Parameters("@ParentRule").Value = txtParentRule.Text23 myCommand.Parameters("@PlantID").Value = txtStartingPlantID.Text24 myCommand.Parameters("@New_ReleasingRulePrefix").Value = txtReleaseRuleFromPrefix.Text25 myCommand.Parameters("@New_ReleasingRuleSuffix").Value = txtReleaseRuleFromSuffix.Text26 myCommand.Parameters("@New_PlantID").Value = txtEndingPlantID.Text27 myCommand.Parameters("@New_RuleSetID").Value = txtEndingRuleSetID.Text28 myCommand.Parameters("@Count").Value = 129 myCommand.Parameters("@IDField").Value = " "
30 myCommand.Parameters("@IDFieldOut").Value = 031
32 myCommand.ExecuteNonQuery()33
34 Dim IDField As String = myCommand.Parameters("@IDFieldOut").Value35
If i run this stored procedure in sql it does return my parameter. But when i run this code IDField comes back null. Any ideas
SP Failing As It Expects A Value For The Output Parameter
Sep 19, 2007ok i have the following sp i want to return the id of the newly inserted row.....but when i try to execute this SP im getting an exception as it is expecting me to insert @idOfNewlyInsertedNote parameter!but that is an output parameter!....please help thanks ALTER PROCEDURE dbo.insertUserNote
@title varchar(50),
@note varchar(MAX),
@memberID int,
@idOfNewlyInsertedNote int output
AS
INSERT INTO userNotes
(title
,note
,dateAdded
,memberID)
VALUES
(@title,
@note,
GETDATE(),
@memberID)
select @idOfNewlyInsertedNote=SCOPE_IDENTITY()
RETURN @idOfNewlyInsertedNote
Multiple Output Parameter From Procedure
Nov 26, 2007I have a sqlserver stored procedure with multiple output parameter like below. I am not sure how I can read the two output parameters at my VB.net code. I am trying to use ExecuteScalar from VB.net and it is throwing an exception.
Procedure:CREATE PROCEDURE dbo.spGetUser
@UserLoginId VARCHAR(80), 'E-mail of user
@Password VARCHAR(50), 'Password in hash
@UserId INT=NULL OUTPUT, 'system generated user id@UserType CHAR(2)=NULL OUTPUT 'type of the user
AS
BEGIN
..........
END
VB Code:
Inside my business layer class
===========================
TryWith objSQLCommand
.CommandType = CommandType.StoredProcedure
.CommandText = "spGetUser".Parameters.AddWithValue("@UserLoginId", UserLoginId)
.Parameters.AddWithValue("@Password", Password).Parameters.AddWithValue("@UserId", UserId)
.Parameters.AddWithValue("@UserType", UserType).Parameters("@UserId").Direction = ParameterDirection.Output
.Parameters("@UserType").Direction = ParameterDirection.Output
End With
bolReturn = mobjDataAccess.Execute(objSQLCommand)
If bolReturn Then GetDetail = True
End If
==========================
Inside my dataaccess layer class
===========================
Public Function Execute(ByVal objSQLCommand As SqlCommand) As Boolean
Execute = False
Dim intReturn As Integer ' 0 = Success, Otherwise Error
intReturn = 1
TryCall Connect()With objSQLCommand
.Connection = mobjConnection
.ExecuteScalar()
End WithCall Disconnect()
If intReturn = 0 Then
Execute = TrueEnd If
Catch ex As ExceptionCall Disconnect()
ex.Source = "Execute"
Execute = False
End Try
End Function
Stored Procedure && Output Parameter
Feb 3, 2008I have a stored procedure that inserts a new record, and returns the ID value for the newly inserted record. The procedure works fine, but I'm unable to get that return value in my code. Here's what I have:
IF OBJECT_ID ( 'dbo.dbEvent', 'P') IS NOT NULL
DROP PROCEDURE dbEvent
GO
CREATE PROCEDURE
@Name varchar(200)
,@Location varchar(200)
AS
INSERT INTO Event
(
NAME
, LOCATION
)
VALUES
(
NAME
, @LOCATION
)
SELECT SCOPE_IDENTITY()
And my code behind: public Int64 Insert(SqlConnection Conn)
{
try
{
using (SqlCommand Command = new SqlCommand("dbo.dbEvent", Conn))
{
Command.CommandType = CommandType.StoredProcedure;
Command.Parameters.Add("@ID", ID).Direction = ParameterDirection.Output;
Command.Parameters.Add("@NAME", SqlDbType.VarChar, 200).Value = PermitName;
Command.Parameters.Add("@LOCATION", SqlDbType.VarChar, 200).Value = Location;
if (Conn.State != ConnectionState.Open) Conn.Open();
Command.ExecuteNonQuery();
Int64 _requestId = Convert.ToInt64(Command.Parameters.Add("@ID", SqlDbType.BigInt).Value.ToString());
return _requestId;
}
I'm getting the error that I have "Too many arguments specified" in my Insert() method. When I test the procedure in Query Analyzer, it works fine and returns the correct value.
Any suggestions? Don't I need to declare that return value in my .NET code as an output parameter?
Access The Value Of An Output Parameter From Your ASP.NET Application Using C#
Mar 13, 2008I have the below procedure with an output parameter '@rowcount'. Now My issue is how to access the value of '@rowcount' in my ASP.Net application using C#. I have also pasted my C# code which I am using .
create procedure mypro1(@id varchar(10),@rowcount int output)
as
select * from canid where id like @id
/* @@ROWCOUNT returns the number of rows that are affected by the last statement. */
select @rowcount=@@rowcount
--------------------------------------------------
C# code to retrieve the output parameter valuecmd = new SqlCommand("mypro1", cn);
cmd.CommandType = CommandType.StoredProcedure;cmd.Parameters.AddWithValue("@id", TextBox1.Text).Direction=ParameterDirection.Input;
Parameter cout = new Parameter("@rowcount",SqlDbType.Int);cout.Direction = ParameterDirection.Output;
cmd.Parameters.Add(cout);
can some body assist me in the above code whether its right or what needs to be added to get the output parameter value.