In my SP I have an output parameter,
the SP work good,
but in the command parameter I alwase get null value/
here is my code:
and in the profiler I see that the query work and return the value, here the query that I copy from the profiler:
thanks!
I'm having a terrible time getting a return value from my stored procedure. The sp sets the value and returns it correctly in the query analyzer, but I can't get the calling code - using VB in VS2003 - to read the value. I've tried putting it into an integer, and using a Return, and also putting it into a string, and using an output parameter. Either way: nada. What am I doing wrong????
Here's the sp:
CREATE PROCEDURE sp_HOUSRoomAudits @Result VarChar(1) OUTPUT, @Dorm VarChar(12), @Room VarChar(5), @StuID VarChar(14) AS
DECLARE @Capacity IntDECLARE @Assigned Int--DECLARE @Result VarChar(1)DECLARE @BD BIT
SET @BD=(SELECT Boarding FROM HOUS_StudentMaster WHERE StudentID=@StuID)
SET @Capacity=(SELECT [Student Capacity] FROM HOUS_Rooms WHERE Bldg=@Dorm AND [Room #]=@Room)
SET @Assigned=(SELECT COUNT(PSID) FROM HOUS_StudentMaster a JOIN HOUS_Dorms b ON a.Dormatory=b.Dormitory WHERE b.Bldg=@Dorm AND a.Status='Active' AND a.Room=@Room)
IF (@BD=1 AND @Room='N/A') OR (@BD=0 AND @Room<>'N/A')
SET @Result='3'ELSE IF @Assigned<@Capacity SET @Result='1' ELSE SET @Result='2'
print @Result--RETURN @ResultGO
Here's the calling code; I'm leaving out all the dim's etc down to the output parameter:
Dim Parm4 As SqlParameter = scmdReturn.Parameters.Add("@Result", SqlDbType.VarChar)
Parm4.Direction = ParameterDirection.Output
Parm4.Value = "0"
Try
scmdReturn.ExecuteNonQuery()
strOut = Parm4.Value
Catch ex As Exception
Me.lblProblem.Text = "Failed to execute command, err = " & ex.Message
Me.lblProblem.Visible = True
Finally
scnnReturn.Close()
End Try
Hoping you can help, and thanks!
Ka
I have a stored proc which will insert and update the table. In this stored procedure I have a output parameter called @rows which is by default 0. Now when ever I insert or update the table and it is successful, then the output parameter should be 1 i.e the out parameter should return value 1 or else default 0.
Here is my code:
ALTER PROCEDURE [dbo].[sample]
(
@TestVARCHAR(256),
@Created_by Nvarchar (256),
@name nvarchar (100),
@rows int=0 output
)
[Code] ....
I am trying to retrieve the Output value from running a Stored Procedure. How can I retrieve the value into a variable?
Below is the source code that I have:1 ' Insert question_text into Question table
2 Dim conn As New SqlConnection(ConfigurationManager.ConnectionStrings("ConnectionString").ConnectionString)
3 Dim cmd As New SqlCommand
4 Dim QuestionID As Integer
5
6 ' Set connection to DB
7 cmd.Connection = conn
8
9 cmd.CommandText = "usp_QuestionResponse_ins"
10 cmd.CommandType = Data.CommandType.StoredProcedure
11
12 Dim sp1 As SqlParameter = cmd.Parameters.Add(New SqlParameter("@question_id", SqlDbType.Int, 4)).Direction = ParameterDirection.Output
13 cmd.Parameters.Add(New SqlParameter("@assessment_id", AssessmentID))
14 cmd.Parameters.Add(New SqlParameter("@domain_id", DomainID))
15 cmd.Parameters.Add(New SqlParameter("@question_text_en", QuestionTextEn))
16 cmd.Parameters.Add(New SqlParameter("@question_text_sp", QuestionTextSp))
17 cmd.Parameters.Add(New SqlParameter("@category_en", CategoryEn))
18 cmd.Parameters.Add(New SqlParameter("@display_order", DisplayOrder))
19 cmd.Parameters.Add(New SqlParameter("@question_template_id", 3))
20 QuestionID = sp1.Value
21 cmd.Connection.Open()
22 cmd.ExecuteNonQuery()
23
24 conn.Close()
25 cmd.Dispose()
26
Here is the Stored Procedure that I have: 1 ALTER PROCEDURE usp_QuestionResponse_ins
2 (
3 @question_id int = null output,
4 @assessment_id int = null,
5 @domain_id int = null,
6 @question_text_en nvarchar(1000) = null,
7 @question_text_sp nvarchar(1000) = null,
8 @category_en nvarchar(500) = null,
9 @display_order smallint = null,
10 @question_template_id int = null
11 )
12 As
13 BEGIN
14 DECLARE @Err Int
15
16 DECLARE @QuestionID INT
17 DECLARE @ReturnValue INT
18 SET @ReturnValue = 0
19
20 DECLARE @CategoryId int
21 SELECT @CategoryId = NULL
22
23 -- Check to see if an answer has already been inserted (i.e. revisiting)
24 SELECT @CategoryId = category_id FROM category WHERE (category_name = @category_en) AND (active_f = 1) AND (delete_f = 0)
25 IF ( @CategoryId IS NOT NULL )
26 BEGIN
27 EXEC @ReturnValue = usp_question_ins @question_id OUTPUT, @assessment_id, @domain_id, 2, 1, 'Right', @display_order, 1, 8, @CategoryID, @question_text_en, Null, Null, 'Horizontal', 0, Null, Null, 0, 1, 0
28 SET @QuestionID = @ReturnValue
29 END
30
31 IF ( @QuestionID IS NOT NULL )
32 BEGIN
33 DECLARE @question_locale_id int
34 EXEC usp_question_locale_ins @QuestionID, 1, @question_text_en, 1, 0
35 EXEC usp_question_locale_ins @QuestionID, 2, @question_text_sp, 1, 0
36
37 END
38
39 RETURN @QuestionID
40 End
What am I doing wrong? How do I properly capture the QuestionID from the SP? Running the SP from command line works fine.
Thanks
I need to return a resultset consisting of database errors from SQL Server stored procedure's CATCH CLAUSE but stuck with it. Do I need to use cursors to return resultset and if so, then what is the type declaration for the OUTPUT parameter in my .NET application? I tried 'Object' and 'Variant' but did not work.
I also tried the simple way just using a SELECT statement to return and it works with one stored procedure but not with another as thus in my CATCH CLAUSE:
Code:
while (@I <= @count)
begin
BEGIN TRY
-- delete all previous rows inserted in @customerRow for previous counts @I
delete from @customerRow
-- this is inserting the current row that we want to save in database
insert into @customerRow
[Code] .....
This does not work when select is made in the CATCH block, ie it returns no rows to my .NET application:
Code:
begin catch
IF @@TranCount > 0 or XACT_STATE()= -1 ROLLBACK TRANSACTION;
DECLARE @ErrorMessage NVARCHAR(4000);
DECLARE @ErrorSeverity INT;
DECLARE @ErrorState INT;
DECLARE @ErrorLine INT;
SELECT @ErrorMessage = ERROR_MESSAGE();
[Code] ....
Just to summarize the code and where the problem is. The code that works uses a SELECT * from temporary table not in the CATCH block and this works while the one that uses the same SELECT * from temporary table inside the CATCH does not return anything! Strange. The Wrong one is used in another Stored procedure from the Right one btw so am wondering why the same code does not work in those two different situations.
I tried to display return value from stored procedure output parameter in Query Analyzer, but I do not know how to do it. Below is my stored procedure:
CREATE PROCEDURE UserLogin
(
@Email nvarchar(100),
@Password nvarchar(50),
@UserName nvarchar(100) OUTPUT
)
AS
SELECT @UserName = Name FROM Users
WHERE Email = @Email AND Password = @Password
GO
If I run the query in Query Analyzer directly, I can display @UserName:
DECLARE @UserName as nvarchar(100)
SELECT @UserName = Name FROM Users
WHERE Email = @Email AND Password = @Password
Select @UserName
But how can I display @UserName if I call stored procedure:
exec UserLogin 'email', 'password', ''
I believed it return int, right?
Thanks in advance for help.
I am trying to bring my stored proc's into the 21st century with try catch and the output clause. In the past I have returned info like the new timestamp, the new identity (if an insert sproc), username with output params and a return value as well. I have checked if error is a concurrency violation(I check if @@rowcount is 0 and if so my return value is a special number.)
I have used the old goto method for trapping errors committing or rolling back the transaction.
Now I want to use the try,catch with transactions. This is easy enough but how do I do what I had done before?
I get an error returning the new timestamp in the Output clause (tstamp is my timestamp field -- so I am using inserted.tstamp).
Plus how do I check for concerrency error. Is it the same as before and if so would the check of @@rowcount be in the catch section?
So how to return timestamp and a return value and how to check for concurrency all in the try/catch.
by the way I read that you could not return an identity in the output clause but I had no problem.
Thanks for help on this
SM haig
After running my ssis pkg for some time with no problems I saw the following error come up, probably during execution of a stored procedure ...
An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The formal parameter "@ReportingId" was not declared as an OUTPUT parameter, but the actual parameter passed in requested output.".
I see some references to this on the web (even this one) but so far they seem like deadends. Doe anybody know what this means? Below is a summary of how the variable is used in the stored proc.
The sp is declared with 21 input params only, none of them is @ReportingId. It declares @ReportingId as a bigint variable and uses it in the beginning of the proc as follows...
Code Snippet
select @ReportingId = max(ReportingId)
from [dbo].[GuidToReportingid]
where Guid = @UniqueIdentifier and
EffectiveEndDate is null
if @ReportingId is null
BEGIN
insert into [dbo].[GuidToReportingId]
select @UniqueIdentifier,getdate(),null,getdate()
set @ReportingId = scope_identity()
END
ELSE
BEGIN
select @rowcount = count(*) from [dbo].[someTable]
where ReportingId = @ReportingId and...lots of other conditions
...later as part of an else it does the following...
Code Snippet
if @rowcount > 0 and @joinsMatch = 1
begin
set @insertFlag = 0
end
else
begin
update [dbo].[GuidToReportingId]
set EffectiveEndDate = getdate()
where ReportingId = @ReportingId
insert into [dbo].[GuidToReportingId]
select @UniqueIdentifier,getdate(),null,getdate()
set @ReportingId = scope_identity()
end
...and before the return it's value is inserted to different tables.
I have a stored procedure which takes an input parm and is supposed to return an output parameter named NewRetVal. I have tested the proc from Query Analyzer and it works fine, however when I run the ASP code and do a quickwatch I see that the parm is being switched to an input parm instead of the output parm I have it defined as...any ideas why this is happening? The update portion works fine, it is the Delete proc that I am having the problems... ASP Code...<asp:SqlDataSource ID="SqlDS_Form" runat="server" ConnectionString="<%$ ConnectionStrings:PTNConnectionString %>" SelectCommand="PTN_sp_getFormDD" SelectCommandType="StoredProcedure" OldValuesParameterFormatString="original_{0}" UpdateCommand="PTN_sp_Form_Update" UpdateCommandType="StoredProcedure" OnUpdated="SqlDS_Form_Updated" OnUpdating="SqlDS_Form_Updating" DeleteCommand="PTN_sp_Form_Del" DeleteCommandType="StoredProcedure" OnDeleting="SqlDS_Form_Updating" OnDeleted="SqlDS_Form_Deleted"><UpdateParameters><asp:ControlParameter ControlID="GridView1" Name="DescID" PropertyName="SelectedValue" Type="Int32" /><asp:ControlParameter ControlID="GridView1" Name="FormNum" PropertyName="SelectedValue" Type="String" /><asp:Parameter Name="original_FormNum" Type="String" /><asp:Parameter Direction="InputOutput" size="25" Name="RetVal" Type="String" /></UpdateParameters><DeleteParameters><asp:Parameter Name="original_FormNum" Type="String" /><asp:Parameter Direction="InputOutput" Size="1" Name="NewRetVal" Type="Int16" /></DeleteParameters></asp:SqlDataSource>Code Behind:protected void SqlDS_Form_Deleted(object sender, SqlDataSourceStatusEventArgs e){ if (e.Exception == null) { string strRetVal = (String)e.Command.Parameters["@NewRetVal"].Value.ToString(); ............................Stored Procedure:CREATE PROCEDURE [dbo].[PTN_sp_Form_Del] (
@original_FormNum nvarchar(20),
@NewRetVal INT OUTPUT )
AS
SET NOCOUNT ON
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
DECLARE @stoptrans varchar(5), @AvailFound int, @AssignedFound int
Set @stoptrans = 'NO'
/* ---------------------- Search PART #1 ----------------------------------------------------- */
SET @AvailFound = ( SELECT COUNT(*) FROM dbo.AvailableNumber WHERE dbo.AvailableNumber.FormNum = @original_FormNum )
SET @AssignedFound = ( SELECT COUNT(*) FROM dbo.AssignedNumber WHERE dbo.AssignedNumber.FormNum=@original_FormNum )
IF @AvailFound > 0 OR @AssignedFound > 0 /* It is ok if no rows found on available table, continue on to Assigned table, otherwise stop the deletion.*/
-----This means the delete can't happen...........
BEGIN
IF @AssignedFound > 0 AND @AvailFound = 0
BEGIN
SET @NewRetVal = 1
END
IF @AssignedFound > 0 AND @AvailFound > 0
BEGIN
SET @NewRetVal = 2
END
IF @AssignedFound = 0 AND @AvailFound > 0
BEGIN
SET @NewRetVal = 3
END
END
ELSE
BEGIN
DELETE FROM dbo.Form
WHERE dbo.Form.FormNum=@original_FormNum
SET @NewRetVal = 0
---Successful deletion
END
GO
-------------------------------------------------------- When I go into the debug mode and do a quickwatch, the NewRetVal is showing as string input.
The stored Procedure I am using
CREATE PROCEDURE GetUserID
(
@Email nvarchar(100),
@Password nvarchar(50),
@UserID int OUTPUT
)
AS
SET @UserID = (SELECT fldResourceID
FROM tblResources
WHERE fldEmail = @Email AND fldPassword = @Password)
GO
The Code Behind to call it.
Dim intUserID As Integer = 0
Dim strConnectionString As String = dbConnect()
Dim objConnection As SqlConnection = New SqlConnection(strConnectionString)
objConnection.Open()
Dim objCmd As SqlCommand = New SqlCommand("EXEC GetUserID '" & strEmail & "','" & strPassword & "', " & intUserID, objConnection)
intUserID = objCmd.ExecuteScalar()
objCmd = Nothing
objConnection = Nothing
Return intUserID
However nothing is returned from the objCmd.ExecuteScalar line. Can anyone help me out here. All I need it to return is a single value. Thanks
How can I return values from my SQL view back into my aspx page and shove each returned value into variables I define for certain returned fields?
View 2 Replies View RelatedHi I need a function which gets 3 parameters and input and returns 4 integers as output.
I don't know how to return 4 integers as output
any idea is appreciated.
Please help me on this one.
I need to return a value to VB.
I've tried returning a numeric value NUMERIC(25,20) via an output parameter but this didn't work. I'm know at a point in wich I created a bigint and multiplied the value so that the decimals are gone. However it only returns NULL?!?!?!?!!?!?
Here's part of my stored proc
CREATE PROCEDURE dbo.uspCalcWeightedAverage @StartDate2 varchar(10), @EndDate2 varchar(10), @InMarket nvarchar(50), @InProductType int, @InWeekDay int, @WeightedAverage bigint OUTPUTAS......SELECT @WeightedAverage = cast(10000000000 * (SUM(HHF.FACTOR) / COUNT(PDF.FLAG)) as bigint)FROM TBL_PRODUCTDEFS PDF INNER JOIN #DATESBETWEENINTERVAL DBI ON DATEPART(HH, [DBI].[DATE]) = [PDF].[HOUR] INNER JOIN tbl_historichourlyfactors HHF ON DATEPART(D,DBI.DATE) = HHF.DayID AND [PDF].[HOUR] = [HHF].[HOUR] AND DATEPART(M,DBI.DATE) = [HHF].[Month]WHERE PDF.MARKETID = @InMarketID AND PDF.PRODUCTTYPEID = @InProductTypeID AND [PDF].[WD-WE] = @InWeekDay AND HHF.MARKETID = @InMarketID AND PDF.FLAG = 1GROUP BY FLAG
When I retrieve the output param it returns a NULL value. the properties in VB say that the parameter has the following props:
attribute 64 (Long)
NumericScale 0 (Byte)
Precision 19 (Byte)
Size 0 (ADO_LNGPTR)
Type adBigInt
Value Null
I try to return it with the following code (got the code from a friend)
Public Function RunProcedure(ByVal v_strStoredProcName As String, ByRef r_varParamValues() As Variant) As ADODB.RecordsetDim objAdoRecordset As ADODB.RecordsetDim objAdoCommand As ADODB.CommandDim lngCtr As Long On Error GoTo RunCommand_Error ' Create cmd object Set objAdoCommand = New ADODB.Command Set objAdoCommand.ActiveConnection = m_oAdoConnection objAdoCommand.ActiveConnection = m_oAdoConnection objAdoCommand.CommandText = v_strStoredProcName objAdoCommand.CommandType = adCmdStoredProc Call objAdoCommand.Parameters.Refresh 'Stop For lngCtr = 0 To UBound(r_varParamValues) If objAdoCommand.Parameters(lngCtr + 1).Direction = adParamInput Then objAdoCommand.Parameters(lngCtr + 1).Value = r_varParamValues(lngCtr) End If Next Set objAdoRecordset = New ADODB.Recordset objAdoRecordset.CursorLocation = adUseClient Set objAdoRecordset = objAdoCommand.Execute 'Stop For lngCtr = 0 To objAdoCommand.Parameters.Count - 1 If objAdoCommand.Parameters(lngCtr).Direction = adParamOutput Or objAdoCommand.Parameters(lngCtr).Direction = adParamInputOutput Then r_varParamValues(lngCtr - 1) = objAdoCommand.Parameters(lngCtr).Value End If Next Set RunProcedure = objAdoRecordsetRunCommand_Exit: ' Collect your garbage here Exit FunctionRunCommand_Error: ' Collect your garbage here Call g_oGenErr.Throw("WeatherFcst.CDbsConn", "RunCommand")End Function
PLEASE HELP.
Regards,
Sander
ex:
myprocedure(@Cusname varchar(50), @Cusid int output)as
Insert into Customer(Cusname) values (@Cusname)SELECT @cusid = @@IDENTITY
i add the query to my adapter called CreatCustomer (@Cusnam,@Cusid)private Merp_CusListTableAdapter _CuslistAdapter = null;protected Merp_CusListTableAdapter Adapter
{
get
{if (_CuslistAdapter == null)
_CuslistAdapter = new Merp_CusListTableAdapter();return _CuslistAdapter;
}
}
Now how i write function in BLL to receive output paramter from creatcustomer function?
Hi
How I building a stored procedure that
return a output parameter and value return that I can
call from other stored procedure or VB ?
thank you in advance
I have a stored proc that will insert a new row into a table
with the values of the parameters you pass in. I need it to
return the value of the ID that's generated by an Identity
column once the row has been written and that value has
been generated. If I just do a SELECT Max(), I could
accidentally grab a row written by someone else, right?
My current sp looks like this:
CREATE PROCEDURE sp_SaveNewLabel
-- @LabelID int output
@LabelType int
, @Logo int
, @Field01 char(30)
AS
INSERT INTO tbLabel
(LabelType
, Logo
, Field01)
VALUES
(@LabelType
, @Logo
, @PrintCC
, @Field01)
How do I grab the new LabelID (the column is int, Identity) and return
it from the stored proc. Any help would be greatly appreciated...
Zack
I'm new to SSIS. I'm looking for basic pointers to return temp table created by a proc to be written to file shares. Any pointers/examples appreciated.
Thanks,
Siva
My store procedure get the QuestionID (PK) from the page and then it's to return a few varchars but gives me the error that string can't be converted to int. ALTER PROCEDURE [dbo].[usp_getQuestionsforEditPopulateText]@QuestionID int,@QuestionDescription varchar(MAX) OUTPUT,@Option1 varchar(50) OUTPUT,@Option2 varchar(50) OUTPUT,@Option3 varchar(50) OUTPUT,@Option4 varchar(50) OUTPUT,@Option5 varchar(50) OUTPUT,@reference varchar(50) OUTPUT,@chb1 int OUTPUT,@chb2 int OUTPUT,@chb3 int OUTPUT,@chb4 int OUTPUT,@chb5 int OUTPUTAsSet @QuestionDescription =(Select questionDescription from QuestionsBank Where questionID = @QuestionID)Set @Option1 =(Select optionDescription from options Where questionID = @QuestionID and optionNumber = 1)Set @Option2 =(Select optionDescription from options Where questionID = @QuestionID and optionNumber = 2)Set @Option3 =(Select optionDescription from options Where questionID = @QuestionID and optionNumber = 3)Set @Option4 =(Select optionDescription from options Where questionID = @QuestionID and optionNumber = 4)Set @Option5 =(Select optionDescription from options Where questionID = @QuestionID and optionNumber = 5)Set @reference = (Select referencedescription from reference where questionID = @QuestionID)Set @chb1 = (Select correctOption from options where questionID = @QuestionID and optionNumber = 1)Set @chb2 = (Select correctOption from options where questionID = @QuestionID and optionNumber = 2)Set @chb3 = (Select correctOption from options where questionID = @QuestionID and optionNumber = 3)Set @chb4 = (Select correctOption from options where questionID = @QuestionID and optionNumber = 4)Set @chb5 = (Select correctOption from options where questionID = @QuestionID and optionNumber = 5) RETURN This is what the page callsDim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection("myconnectionstring ") Dim cmdUpdate As New Data.SqlClient.SqlCommand("usp_getQuestionsforEditPopulateText", dbConnection) cmdUpdate.CommandType = Data.CommandType.StoredProcedure cmdUpdate.Parameters.Add(New Data.SqlClient.SqlParameter("@QuestionID", Data.SqlDbType.Int)) cmdUpdate.Parameters("@QuestionID").Value = QuestionID cmdUpdate.Parameters.Add(New Data.SqlClient.SqlParameter("@QuestionDescription", Data.SqlDbType.VarChar)) cmdUpdate.Parameters("@QuestionDescription").Direction = Data.ParameterDirection.Output cmdUpdate.Parameters.Add(New Data.SqlClient.SqlParameter("@Option1", Data.SqlDbType.VarChar)) cmdUpdate.Parameters("@Option1").Direction = Data.ParameterDirection.Output cmdUpdate.Parameters.Add(New Data.SqlClient.SqlParameter("@Option2", Data.SqlDbType.VarChar)) cmdUpdate.Parameters("@Option2").Direction = Data.ParameterDirection.Output cmdUpdate.Parameters.Add(New Data.SqlClient.SqlParameter("@Option3", Data.SqlDbType.VarChar)) cmdUpdate.Parameters("@Option3").Direction = Data.ParameterDirection.Output cmdUpdate.Parameters.Add(New Data.SqlClient.SqlParameter("@Option4", Data.SqlDbType.VarChar)) cmdUpdate.Parameters("@Option4").Direction = Data.ParameterDirection.Output cmdUpdate.Parameters.Add(New Data.SqlClient.SqlParameter("@Option5", Data.SqlDbType.VarChar)) cmdUpdate.Parameters("@Option5").Direction = Data.ParameterDirection.Output cmdUpdate.Parameters.Add(New Data.SqlClient.SqlParameter("@reference", Data.SqlDbType.VarChar)) cmdUpdate.Parameters("@reference").Direction = Data.ParameterDirection.Output cmdUpdate.Parameters.Add(New Data.SqlClient.SqlParameter("@chb1", Data.SqlDbType.Int)) cmdUpdate.Parameters("@chb1").Direction = Data.ParameterDirection.Output cmdUpdate.Parameters.Add(New Data.SqlClient.SqlParameter("@chb2", Data.SqlDbType.Int)) cmdUpdate.Parameters("@chb2").Direction = Data.ParameterDirection.Output cmdUpdate.Parameters.Add(New Data.SqlClient.SqlParameter("@chb3", Data.SqlDbType.Int)) cmdUpdate.Parameters("@chb3").Direction = Data.ParameterDirection.Output cmdUpdate.Parameters.Add(New Data.SqlClient.SqlParameter("@chb4", Data.SqlDbType.Int)) cmdUpdate.Parameters("@chb4").Direction = Data.ParameterDirection.Output cmdUpdate.Parameters.Add(New Data.SqlClient.SqlParameter("@chb5", Data.SqlDbType.Int)) cmdUpdate.Parameters("@chb5").Direction = Data.ParameterDirection.Output 'open connection dbConnection.Open() 'Execute non query cmdUpdate.ExecuteNonQuery() 'close connection dbConnection.Close()
View 8 Replies View RelatedHi all. I have a stored procedure on my sql server that returns asimple informtation about that tim a database was backed up. I owuldlike to create an HTA that operator types can look at to make surethat the backups finished, can someone help me do this?The stored procedure in called sp_lastback and the output looks likethis:database days since backup timestamp of backupdbase1 0 2004-10-14 00:41:21.000dbase2 0 2004-10-14 00:08:36.000dbase3 1 2004-10-13 22:46:57.000Can this be done? If someone could help me with this simple problem, Icould probably reuse the same method a 100 useful ways.Thanks in advance!
View 3 Replies View RelatedMy stored procedure was running sqlserver 2012 but can't return output parameter value here i paste my SP ...
alter Procedure BD_InsertMobileClient_GpsLogPlanogram
(
@SalesPersonID int,
@MobileRowID int,
@StatusCode int output
)
[Code] .....
The foolowing code I cannot seem to get working right. There is an open connection c0 and a SqlCommand k0 persisting in class.The data in r0 is correct and gets the input arguments at r0=k0->ExecuteReader(), but nothing I do seems to get the output values. What am I missing about this?
System::Boolean rs::sp(System::String ^ ssp){
System::String ^ k0s0; bool bOK;
System::Data::SqlClient::SqlParameter ^ parami0;
System::Data::SqlClient::SqlParameter ^ parami1;
System::Data::SqlClient::SqlParameter ^ parami2;
System::Data::SqlClient::SqlParameter ^ paramz0;
System::Data::SqlClient::SqlParameter ^ paramz1;
System::Int32 pz0=0;System::Int32 pz1=0;
k0s = ssp;
k0->CommandType=System::Data::CommandType::StoredProcedure;
k0->CommandText=k0s;
paramz0=k0->Parameters->Add("@RETURN_VALUE", System::Data::SqlDbType::Int);
//paramz0=k0->Parameters->AddWithValue("@RETURN_VALUE",pz0);
//paramz0=k0->Parameters->AddWithValue("@RETURN_VALUE",pz0);
paramz0->Direction=System::Data::ParameterDirection::ReturnValue;
paramz0->DbType=System::Data::DbType::Int32;
parami0=k0->Parameters->AddWithValue("@DESCXV","chicken");
parami0->Direction=System::Data::ParameterDirection::Input;
parami1=k0->Parameters->AddWithValue("@SRCXV","UU");
parami1->Direction=System::Data::ParameterDirection::Input;
//paramz1=k0->Parameters->AddWithValue("@RCOUNT",pz1);
paramz1=k0->Parameters->Add("@RCOUNT",System::Data::SqlDbType::Int);
paramz1->Direction=System::Data::ParameterDirection::InputOutput;
paramz0->DbType=System::Data::DbType::Int32;
//k0->Parameters->GetParameter("@RCOUNT");
r0=k0->ExecuteReader();
//pz0=System::Convert::ToInt32(paramz0->SqlValue);
bOK=k0->Parameters->Contains("@RCOUNT");
//k0->Parameters->GetParameter("@RCOUNT");
pz0=System::Convert::ToInt32(paramz0->Value);
pz1=System::Convert::ToInt32(paramz1->Value);
ndx = -1;
while(r0->Read()){
if (ndx == -1){
ndx=0;
pai0ndx=0;
pad0ndx=0;
r0nf=r0->FieldCount::get();
for (iG1_20=0;iG1_20<r0nf;iG1_20++){
this->psf0[iG1_20]=this->r0->GetName(iG1_20);
this->psv0[iG1_20]=this->r0->GetDataTypeName(iG1_20);
this->psz0[iG1_20]=System::Convert::ToString(this->r0->GetValue(iG1_20));
this->pas0[ndx,iG1_20]=System::Convert::ToString(this->r0->GetValue(iG1_20));
if (psv0[iG1_20]=="int") {pai0[ndx,pai0ndx]=System::Convert::ToInt32(r0->GetValue(iG1_20));pai0ndx++;}
if (psv0[iG1_20]=="float") {pad0[ndx,pad0ndx]=System::Convert::ToDouble(r0->GetValue(iG1_20));pad0ndx++;}
}
}
else {
pai0ndx=0;
pad0ndx=0;
for (iG1_20=0;iG1_20<r0nf;iG1_20++)
{ this->pas0[ndx,iG1_20]=System::Convert::ToString(this->r0->GetValue(iG1_20));
if (psv0[iG1_20]=="int") {pai0[ndx,pai0ndx]=System::Convert::ToInt32(r0->GetValue(iG1_20));pai0ndx++;}
if (psv0[iG1_20]=="float") {pad0[ndx,pad0ndx]=System::Convert::ToDouble(r0->GetValue(iG1_20));pad0ndx++;}
}
}
ndx++;
}
r0nr=ndx;
r0->Close();
k0->Parameters->Remove(paramz0);
k0->Parameters->Remove(parami1);
k0->Parameters->Remove(parami0);
k0->Parameters->Remove(paramz1);
return true;
}
I have an SQL INSERT statement with an output parameter called @CusRef. I have been trying to store this in a session variable, however all i am able to store is the reference to the parameter object. (The returned value stored in the parameter is an Integer)Session("CustomerReference") = DataConn.InsertParameters.Item("CusRef")I cant seem to find a value field or a method to get the value from a parameter. I have also tried using CType(DataConn.InsertParameters.Item("CusRef"), Integer) but it cant convert the Parameter type to an Integer.Please help,ThanksGareth
View 1 Replies View RelatedA SQL Server 2005 DB table named "Users" has the following columns:
ID - int (IDENTITY)FirstName - varchar(50)LastName - varchar(50)UserID - varchar(20)Password - varchar(20)
Before inserting a new record in the DB table, ASP.NET first checks whether the UserID supplied by the new record already exists or not. If it exists, the new record shouldn't be inserted in the DB table & the user should be shown a message saying UserID already exists. To do this, ASP.NET uses a stored procedure. If the value returned by the stored procedure is 1, it means that the UserID already exists. If the value returned by the stored procedure is 0, then the new record should be inserted in the DB table. This is how I have framed the stored procedure:
CREATE PROCEDURE RegUsers @FName varchar(50), @LName varchar(50), @UserID varchar(50), @Password varchar(50), @return_value int OUTPUTAS IF EXISTS(SELECT UserID FROM Users WHERE UserID=@UserID) BEGIN SET @return_value=1 END ELSE BEGIN SET @return_value=0 INSERT INTO Users VALUES (@FName,@LName,@UserID,@Password) END
& this is how I am invoking the stored procedure from the ASPX page:
<script runat="server"> Sub btnSubmit(ByVal obj As Object, ByVal ea As EventArgs) Dim sqlCmd As SqlCommand Dim sqlConn As SqlConnection
sqlConn = New SqlConnection("Data Source=MyDBSQLEXPRESS;Initial Catalog=DB;Integrated Security=True") sqlCmd = New SqlCommand("RegUsers", sqlConn) sqlCmd.CommandType = CommandType.StoredProcedure
With sqlCmd Parameters.Add("@return_value", SqlDbType.Int, 4).Direction = ParameterDirection.ReturnValue Parameters.AddWithValue("@FName", txtFName.Text) Parameters.AddWithValue("@LName", txtLName.Text) Parameters.AddWithValue("@UserID", txtUserID.Text) Parameters.AddWithValue("@Password", txtPassword.Text) End With
sqlConn.Open() sqlCmd.ExecuteNonQuery()
If (sqlCmd.Parameters(0).Value = 1) Then lblMessage.Text = "UserID Already Exists!" ElseIf (sqlCmd.Parameters(0).Value = 0) Then lblMessage.Text = "Thanks For Registering!" End If
sqlConn.Close() End Sub</script><form runat="server"><%-- the 4 TextBoxes come here --></form>
When I execute the above ASPX code, if the UserID I entered already exists in the DB table, then ASPX generates the following error:
Procedure or Function 'RegisterUsers' expects parameter '@return_value', which was not supplied.
pointing to the line
sqlCmd.ExecuteNonQuery()
Can someone please point out where am I going wrong?
Here is what I have so far, I can get a number added to the table running my sproc from management studio. But how do I get it out as it is being intserted and then use it in my code?ALTER PROCEDURE [dbo].[NumberCounter]
-- Add the parameters for the stored procedure here
@InsertDate datetime
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
INSERT INTO tblNumberCounter (InsertDate) Values (@InsertDate);Select IDENT_CURRENT('tblNumberCounter')
END
Public Sub SubmitAdd_Click(ByVal Sender As System.Object, ByVal E As System.EventArgs)
Dim Con As SqlConnection
Dim StrInsert As String
Dim cmdInsert As SqlCommand
Dim myNewReceiptNumber As Integer
Dim ConnectStr As String = _
ConfigurationManager.ConnectionStrings("ConnectionString").ConnectionString
'Add row to receipt table, then get it for ReceiptNumberText field.
cmdInsert = New SqlCommand
cmdInsert.CommandText = "NumberCounter"
cmdInsert.CommandType = CommandType.StoredProcedure
cmdInsert.Connection = New SqlConnection(ConnectStr)
cmdInsert.Parameters.AddWithValue("@InsertDate", System.DateTime.Today.ToShortDateString())
Try
Con.Open()
myNewReceiptNumber = cmdInsert.ExecuteScalar()
'Response.Write(myNewReceiptNumber)
Catch objException As SqlException
Dim objError As SqlError
For Each objError In objException.Errors
Response.Write(objError.Message)
Next
Finally
Con.Close()
End Try
End Sub
Can anyone see in this stored procedure code and my post sub why the stored procedure is not getting the @ReceiptNumber?
@ReceiptNumber int OUTPUTASBEGININSERT INTO tblNumberCounter (InsertDate)Values (GETDATE())SET @ReceiptNumber=SCOPE_IDENTITY()INSERT INTO tblReceipts (pl_ID,client_ID,PaymentDate,Fund_ID,TenderTypeID,AmountPaid,ReceiptNumber,DateEntered,EnteredBy) SELECT PL.Pl_ID, RS.client_id, PL.pmtDate, RS.rec_fund_id, RS.rec_tendertypeid, RS.rec_amount, @ReceiptNumber, RS.DateEntered, RS.EnteredByFROM tblRec_setup AS RS INNER JOIN tblPayments AS PL ON RS.rec_id = PL.rec_id Sub Post() Dim cmdInsert1 As SqlCommand Dim tr As SqlTransaction = Nothing Dim ConnectStr As String = _ ConfigurationManager.ConnectionStrings("2ConnectionString").ConnectionString Dim conn As New SqlConnection(ConnectStr) cmdInsert1 = New SqlCommand cmdInsert1.CommandType = CommandType.StoredProcedure cmdInsert1.CommandText = "BatchMonthly" 'Get a new receipt number and add it. Dim InsertedIntegerRN As New SqlParameter("@ReceiptNumber", SqlDbType.Int) InsertedIntegerRN.Direction = ParameterDirection.Output cmdInsert1.Parameters.Add(InsertedIntegerRN) 'Try conn.Open() tr = conn.BeginTransaction() cmdInsert1.Transaction = tr cmdInsert1.Connection = conn cmdInsert1.ExecuteScalar() tr.Commit() 'Catch objException As SqlException tr.Rollback() 'Dim ex As SqlError 'Response.Write(ex.Message) 'Finally conn.Close() 'End Try End Sub
Hi I want to make a Function in my User class that adds new members into the db. What I want to do is add the users details in using a stored procedure and input parameters and then return a parameter indicating their userid value and set it to a variable.
My userid column in the my db is auto incrementing with a seed of 1 and a step value of 1.
How could I create an output parameter that would return their new user id and then how would i set it to an integer variable.
Thanks
I keep getting an error stating my stored proc expects "@ret_value" and it's not declared. Even once it is declared, I'm not sure if my proc is going to return the value properly...been working on this half a day.
params put on new line for readability...
Private Sub update_DB()
Dim intResult, ret_value As Integer
ret_value = 0
intResult = SqlHelper.ExecuteNonQuery(ConfigurationSettings.AppSettings("connString"), CommandType.StoredProcedure, "Media_Tracking_add_MarketingID",
New System.Data.SqlClient.SqlParameter("@strMarketingID", txtMarketingID.Text),
New System.Data.SqlClient.SqlParameter("@strAdCampaignName", txtAdCampaignName.Text),
New System.Data.SqlClient.SqlParameter("@strCompany", ddlCompany.SelectedItem.Value),
New System.Data.SqlClient.SqlParameter("@strCampaignType", ddlCampaignType.SelectedItem.Value),
New System.Data.SqlClient.SqlParameter("@ret_value", ret_value, ParameterDirection.Output))
lblSuccess.Text = "RETURN = " & ret_value
End Sub
S Proc
CREATE PROCEDURE [dbo].[media_tracking_add_MarketingID]
@strMarketingID nvarchar(50),
@strAdCampaignName nvarchar(50),
@strCompany nvarchar(3),
@strCampaignType nvarchar(50),
@ret_value int OUTPUT
AS
INSERT INTO media_tracking_Marketing_IDs(MarketingID,AdCampaignName,company,status,CampaignType)
values (@strMarketingID,@strAdCampaignName,@strCompany,'1',@strCampaignType);
set @ret_value = scope_identity();
return @ret_value;
GO
Hello!Can anybody tell me how can I retreive the value of an output parameter from an stored procedure using an SqlDataSource control?Thank you
View 1 Replies View RelatedCan any body help me
CREATE PROCEDURE getRowCount
@where NVARCHAR(500)
,@totalRows INT OUTPUT
AS
BEGIN
DECLARE @SQL NVARCHAR(2000)
SET @SQL = ' SELECT ' + cast(@totalRows as NVARCHAR) + ' = COUNT(*)
FROM Employee E'
IF LEN(@where ) > 0
BEGIN
SET @SQL= @SQL + @Where
END
EXEC (@SQL)
END
It doesn't return a totalRows value.
Thanks in advance.
I've tried using:
Declare @answer bit
Execute procUserVer username answer output
Create PROCEDURE procUserVer
@User char(15),
@Validate bit output
AS
Declare @UserFound int
Select @UserFound = count(*)
From usernames
where networklogin = @user
select @userFound
if @userFound >0
set @validate = 1
else
set @validate = 0
Hi Guys, I can't for the life of me get the output from the stored procedure into my variable in VB.net. Can you guys help out, I'm on my third hour. Trying to learn this peice as I go (output parameters). I have truncated the code to look at the output parameter, everything works except the VB side of the output parameter, my messagebox keeps giving me a value of zero. I have even tried .SQLValue instead of .Value and it didn't work...thoughts????Thanks in advance!Tim
SQL:ALTER PROCEDURE dbo.SDC_RisIncidentInsert @SeqInc int output ASSelect @SeqInc = Max(Sequence) + 1 From _Smdba_._Telmaste_Select @SeqInc---------------------------------------------------------------------------------------------
VB.NetPrivate Sub InsertIncident()Dim conn As SqlConnectionDim comm As SqlCommandDim connectionstring As String = ConfigurationManager.ConnectionStrings("Magic").ConnectionStringconn = New SqlConnection(connectionstring)comm = New SqlCommand("SDC_RisIncidentInsert", conn)comm.CommandType = System.Data.CommandType.StoredProcedurecomm.Parameters.Add("@SeqInc", SqlDbType.Int)comm.Parameters("@SeqInc").Direction = ParameterDirection.Output
Dim SeqIncident As Integer = comm.Parameters.Item("@SeqInc").ValueMsgBox(SeqIncident)
Try conn.Open() comm.ExecuteNonQuery()Catch ex As Exception dberrorlabel.Text = "Could not Insert Incident Record"
Finally conn.Close() Response.Redirect("/RISDEV/SDC_Incident.aspx?Name=" & SeqIncident & "#Incident")End TryEnd Sub
I have the following sp:ALTER PROCEDURE myspPrepareTextForHTML @MessageContent nvarchar(1400), @returnval nvarchar(1400) outputASBEGINSET NOCOUNT ON;SET @returnval='something'RETURN @returnvalENDWhen I try this:
EXEC myspPrepareTextForHTML @MessageContent='dfgsdfgdf', @returnval OUTPUT
print @returnval
I get the error:Must declare the scalar variable "@returnval".
How can I get this to work?
Stored procedure works:
PROCEDURE dbo.VerifyZipCode@CZip nvarchar(5),@CZipVerified nvarchar(5) outputAS IF (EXISTS(SELECT ZIPCode FROM ZipCensus11202006 WHERE ZIPCode = @CZip)) SET @CZipVerified = 'Yes' ELSE SET @CZipVerified = 'Not Valid Zip'RETURN
Need help calling and processing sp information:
protected void C_Search_btn_Click(object sender, EventArgs e){ SqlConnection con = new SqlConnection(ConfigurationManager.ConnectionStrings["localhomeexpoConnectionString2"].ConnectionString); SqlCommand cmd = new SqlCommand("VerifyZipCode", con); cmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.AddWithValue("@CZip", UserZipCode_tbx.Text);
. . . how do you set up output parameter, call the SP and capture output. . . ? if (@CZipVerified == "Not Valid Zip") { TextBox5.Text = "Zip code not valid please re-enter zip"; } else { Continue processing page }
}